国内外铸铁管标准 cast iron pipe standards

国内外铸铁管标准 cast iron pipe standards
美国铸铁管标准(ANSI cast iron pipe standards)
ANSI/ASME B16.1-2005 25、125、250和800级铸铁管法兰和法兰配件 Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800
ANSI/ASME B16.42-1998 球墨铸铁管法兰和法兰配件 Ductile Iron Pipe Flanges and Flanged Fittings
ANSI/ASME B16.45-1998 Soventr排水系统用铸铁管件 Cast Iron Fittings for Soventr Drainage Systems
ANSI/ASTM A182/A 182M-2001 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ANSI/ASTM D1599-1999 塑料管材、管道和管件短时液压故障压力试验方法 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ANSI/ASTM D2152-1995 丙铜浸入挤压聚氯乙烯管材和模铸管件熔解充分性试验方法 Test Method for Adequacy of Fusion of Extruded Poly (Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
ANSI/ASTM D2444-1999 热塑管材和管件耐冲击性落锤试验方法 Test Method for Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ANSI/ASTM D2468-1996 丙烯腈-丁二烯-苯乙烯共聚物塑料管材和管件规范,表 40 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
ANSI/ASTM D2671-2000 电气用热缩管件试验方法(10.02) Test Methods for Heat-Shrinkable Tubing for Electrical Use (10.02)
ANSI/ASTM D2855-1996 聚氯乙烯 (PVC)管材和管件溶剂接合连接件制作惯例 Practice for Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings
ANSI/ASTM D2902-2000 含氟聚合物树脂热缩管件规范(10.02) Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation
ANSI/ASTM D2992-2001 玻璃纤维(玻璃纤维增强热固树脂)管件和配件获得静水压或压力设计基础的实施规程(08.04) Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (08.04)
ANSI/ASTM D2996-2001 绕组线玻璃纤维(玻璃纤维增强热固树脂)管件和配件规范(08.04) Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe (08.04)
ANSI/ASTM D3144-2000 电绝缘用聚1,1-二氟乙烯热缩管件规范(10.02) Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
ANSI/ASTM D3261-1997 聚乙烯塑料管材和管道用对接热融合聚乙烯塑料管件规范 Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ANSI/ASTM D5677-2005 用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ANSI/ASTM F1336-2002 带密封垫的聚氯乙烯(PVC)下水道管件规范 Specification for Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ANSI/ASTM F1866-2005 管壁厚度40的聚氯乙烯(PVC)塑料排水管和DWV装配管件的规范 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
ANSI/ASTM F1961-2002 交联聚乙烯(PEX)管用带盘簧的金属机械冷压扩口式管件规范 Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
ANSI/AWWA C105/A 21.5-2005 球墨铸铁管路系统用聚乙烯包装物 Polyethylene Encasement for Ductile-Iron Pipe Systems
ANSI/AWWA C115/A 21.15-2005 带球墨铸铁或灰口铸铁螺纹法兰的法兰球墨铸铁管 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
ANSI/AWWA C150/A 21.50-2002 球墨铸铁管的厚度设计 Thickness Design of Ductile-Iron Pipe
ANSI/SAE J1131-1998 汽车空气制动系统中使用的SAE J844d非金属管件和连接组件的性能要求 Tubing and Fitting Assemblies Used in Automotive Air Brake Systems, Performance Requirements for SAE J844d Nonmetallic
ANSI/SAE J246-1994 球面及法兰式(压缩)套管管件 Spherical and Flanged Sleeve (Compression) Tube Fittings
ANSI/SAE J514-1998 液压管件 Hydraulic Tube Fittings
ANSI/SAE J530-1994 汽车管件接头 Automotive Pipe Fittings
ANSI/UL 109-2004 易燃和可燃液体、制冷辅助设备和船上用管件的安全标准 Standard for Safety for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
ANSI/UL 1684-2002 增强热固树脂管件和配件 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
ANSI/UL 797-2004 电气金属管件 Electrical Metallic Tubing
ASME A112.19.1M Supplement 2-2 搪瓷铸铁管道固定件.补充件2 (Enameled cast iron plumbing fixtures - Supplement 2)
ASME A112.19.1M-1994 搪瓷铸铁管道固定件 (Enameled cast iron plumbing fixtures)
ASME B16.1-1998 铸铁管法兰及法兰配件.等级25、125和250 (Cast iron pipe flanges and flanged fittings - Classes 25, 125, and 250)
ASME B16.12-1998 铸铁螺纹排水管件 (Cast iron threaded drainage fittings)
ASME B16.15-1985 铸青铜螺纹管件 (Cast bronze threaded fittings)
ASME B16.18-2001 铸铜合金软钎焊连接压力管件 (Cast copper alloy solder joint pressure fittings)
ASME B16.23-2002 DWV类铸铜合金钎焊连接排水管件 (Cast copper alloy solder joint drainage fittings: DWV)
ASME B16.42-1998 球墨铸铁管法兰及法兰配件.等级150和300 (Ductile iron pipe flanges and flanged fittings - Classes 150 and 300)
ASME B16.5-1996 管法兰和法兰管件.NPS 1/2 - NPS 24 (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24)
ASME B16.5a Addenda-1998 管法兰和法兰管件.NPS 1/2至NPS 24.附录 (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24; Addenda)
ASTM A 182/A 182Ma-2005 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件的标准规范 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 338-1984 铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件 Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C)
ASTM A 674-2005 水或其他液体用球墨铸铁管的聚乙烯包装物的标准实施规程 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
ASTM B 903-2000 内部增强的无缝铜热交换器管件的标准规范 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
ASTM C 450-2002 公称尺寸的管件、容器隔热层用绝热配件覆盖物生产的标准实施规范 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
ASTM C 668-1998 石棉水泥传输管件标准规范 Standard Specification for Asbestos-Cement Transmission Pipe
ASTM D 2661-2002 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通气管及其管件.附表40 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D 2665a-2004 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM F 1336-2002 衬垫聚氯乙烯(PVC)物的下水道管件的标准规范 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F 1961a-2002 交联聚乙烯(PEX)管用带盘簧的金属机械冷扩口加压管件的标准规范 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
ASTM F 2080-2005 交联聚乙烯(PEX)管用带金属压缩套的冷膨胀管件的标准规范 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
ASTM F 2159-2005 SDR9交联聚乙烯(PEX)管用利用铜挤压环的塑料插入管件的标准规范 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
ASTM F 876-2005 交联聚乙烯(PEX)管件的标准规范 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
UL 1821-2003 消防设备用热塑性塑料喷水器的管及其管件 (Thermoplastic sprinkler - Pipe and fittings for fire protection service)
英国铸铁管标准(BS cast iron pipe standards)

BS 1640-1-1962 石油工业用钢对焊管管件规范.第1部分:锻制碳钢与铁素体合金钢管件 Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings
BS 1640-4-1968 石油工业用钢对焊管管件规范.第4部分:锻造和铸造奥氏体铬镍钢管件:米制单位 Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units
BS 3868-1995 预制排水用镀锌钢管件规范 Specification for prefabricated drainage stack units in galvanized steel
BS 416-1-1990 砂型铸造或离心铸造的排水和通风铸铁管及管件.第1部分:插承套管系统规范 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron - Specification for spigot and socket systems
BS 460-2002 雨水排放用铸铁管件.规范 Cast Iron rainwater goods - Specification
BS 4677-1984 输送液体用奥氏体不锈钢管件的电弧焊规范 Specification for arc welding of austenitic stainless steel pipework for carrying fluids
BS 5667-5-1979 连续式机械装卸设备规范.安全性要求.第5部分:松散物料:气动装卸用连接器与软管件 Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: couplings and hose components used in pneumatic handling
BS 569-1973 石棉水泥雨水管件规范 Specification for asbestos-cement rainwater goods
BS 759-1-1984 锅炉与锅炉连接管路用阀门、水位计及其它安全管件.第1部分:阀门、安装件和管件规范 Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings
BS 7892-2000 水泥砂浆衬砌的可锻铁管和管件密封涂层规范 Specification for seal coats on cement mortar lined ductile iron pipes and fittings
BS 864-3-1975 铜和铜合金制毛细管与承压管管件.第3部分:聚乙烯管用承压管件 Capillary and compression tube fittings of copper and copper alloy - Compression fittings for polyethylene pipes
BS EN 10329-2006 海上或离岸管道用钢管和管件.外部连接包覆层 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
BS EN 12107-1998 塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
BS EN 12117-1998 塑料管道系统.管件、阀门和附件.气体流速与压降之间关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
BS EN 12585-1999 玻璃装置、管道和管件.DN 15至DN 1000的管道和管件.兼容性和可互换性 Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability
BS EN 14424-2005 带螺旋箍的软管管件 Hose fittings with screwed ferrules
BS EN 14901-2006 球墨铸铁管、配件和附件.球墨铸铁配件及附件的环氧涂层(重载).要求和试验方法 Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
BS EN 274-2-2002 卫生器具用下水道管件.试验方法 Waste fitting for sanitary appliances - Test methods
BS EN 295-6-1996 排水管和污水管用陶制管、管件及管接头.陶制管人孔的要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes
BS EN 295-7-1996 排水管和污水管用陶制管、管件及管接头.陶制管和管插接接头的要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking
BS EN 545-2002 水管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
BS EN 598-1995 污水工程用球墨铸铁管、接头、配件及其连接件.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
BS EN 60423-1995 电气设备用导管.电气装置用导管的外径和导管及管件的螺纹 Conduits for electrical purposes - Outside diameters of conduits for electrical installations and threads for conduits and fittings
BS EN 682-2002 弹性密封件.运送气体和液态碳氢化合物的管件及配件中用的密封件的材料要求 Elastomeric seals - Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
BS EN 713-1995 塑料管道系统.管件和聚烯烃压力管的机械连接.组件承受弯曲作用时内部压力密封性的试验方法 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
BS EN 714-1995 热塑管道系统.压力管和模塑管件的无端负荷弹性密封环型连接件.在无轴向推力时内部流体静压力下密封性的试验 Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust
BS EN 804-1995 塑料管道系统.压力管道溶剂胶粘接头的注射模塑承口连接管件.短期内部液压压力的试验方法 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
BS EN 877-1999 建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
BS EN 969-1996 煤气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
BS EN ISO 12162-1996 压力用热塑性塑料管道和管件.分类和设计.总体使用（设计）系数 Thermoplastics materials for pipes and fittings for pressure applications - Classification and design - Overall service (design) coefficient
BS EN ISO 1746-2001 橡胶或塑料软管和管件.弯曲试验 Rubber or plastics hoses and tubing - Bending tests
BS EN ISO 6708-1996 管件.标称尺寸的定义和选择 Pipework components - Definition and selection of DN (nominal size)
BS EN ISO 8795-2002 用于输送供人消耗用水的塑料管道系统.析出物渗移量的车测定.塑料管道、管件和连接件的析出物渗移量的测定 Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints
BS ISO 10147-2005 交联聚乙烯(PE-X)管和管件.通过测定凝胶含量估算交联度 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
BS ISO 10838-1-2001 燃气用聚乙烯管道系统的机械管件.标称外径小于或等于63mm的管道用金属管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 10838-2-2001 燃气用聚乙烯管道系统的机械式管件.标称外径大于63mm的管道用金属管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter greater than 63mm
BS ISO 10838-3-2001 燃气用聚乙烯管道系统的机械式管件.标称外径小于或等于63mm的管道用热塑性塑料管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 15840-2006 船舶和海上技术.海上设备用热固性树脂纤维玻璃管和管件的标准规范 Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
BS ISO 16132-2004 球墨铸铁管和配件.水泥灰浆衬套的密封涂层 Ductile iron pipes and fittings - Seal coats for cement mortar linings
BS ISO 16241-2005 管和管件用聚乙烯材料耐慢速裂纹伸展的测定的缺口拉伸试验(PENT) Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
BS ISO 4179-2005 压力和非压力管道用球墨铸铁管和配件.水泥灰浆内衬 Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
BS ISO 727-1-2002 承压的管件用未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.米制系列 Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Metric series
BS ISO 727-2-2005 压力管件用由未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)或丙烯腈/丁二烯/苯乙烯(ABS)制的带普通管套的管 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Inch-based series
BS ISO 8085-1-2001 供应燃气的聚乙烯管上使用的聚乙烯管件.米制系列.规范.用加热工具进行套筒熔融的管件 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Fittings for socket fusion using heated tools
BS ISO 8085-2-2001 供应气体燃料的聚乙烯管上使用的聚乙烯管件.米制系列.规范.熔接用的、通过加热器具进行的套筒熔融用的及与 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings
BS ISO 8085-3-2001 供应燃气的聚乙烯管使用的聚乙烯管件.米制系列.规范.电熔融管件 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Electrofusion fittings
BS ISO 8179-1-2004 球墨铸铁管.外部镀锌.终饰层用金属锌 Ductile iron pipes - External zinc-based coating - Metallic zinc with finishing layer
BS ISO 9349-2005 预绝缘球墨铸铁管道系统 Preinsulated ductile iron pipeline systems
德国铸铁管标准(DIN cast iron pipe standards)
DIN 11832-1-1990 农场和牲畜饲养设备.输送液态粪肥的管道用阀门管件.第1部分:最大1巴的静压力闸阀 Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
DIN 11861-1976 饮料和乳品用管件.橡胶密封圈.要求和试验 Drink- and dairy fittings; sealing rings made of elastomeric materials, requirements testing
DIN 11867-2005 无菌、化学和制药工业的生铁系统用弯头、不锈钢焊接管件 Elbows for pigging systems, welding fittings in stainless steel, for aseptic, chemical and pharmaceutical industries
DIN 12918-1-1999 实验室设备.实验室管件.第1部分:水阀 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 16831-6-2003 管道连接件和压力管用聚丁烯(PB)元件.PB 125. 第6部分:电阻焊管件.尺寸 Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 6: Fittings for resistance-welding; Dimensions
DIN 16962-9-1983 1型和2型聚丙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16963-14-1983 1型和2型高密度聚乙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16963-9-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑三通管件.尺寸 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
DIN 16966-4-1982 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.三通喷管嘴尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions
DIN 16966-5-1982 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.缩径管.尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions
DIN 16966-6-1982 玻璃纤维增强聚酯树管(UP-GF)管件和接头组件.卡圈、法兰、密封圈、尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions
DIN 16966-8-1982 玻璃纤维增强聚酯管(UP-GF)管件和接头.层压塑料接头.尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions
DIN 16967-2-1982 玻璃纤维增强环氧树脂(EP-GF)管件和接头.弯管、三通管、尺寸 Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions
DIN 19522-2000 无承口的铸铁排水管和管件 Cast iron drainage pipes and fittings without sockets (SML)
DIN 19534-3-2000 非压力地下排水和污水排放用带环形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:质量控制和安装 Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation
DIN 19535-10-2000 建筑物内耐热水排污系统(HT)用高密度聚乙烯(PE-HD)管和管件.第10部分:防火性能、质量控制和安装的推荐规范 High-density polyethylene (PE-HD) pipes and fittings for hot-water resistant waste and soil discharge systems (HT) inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
DIN 19561-10-1999 建筑物内部耐热水的废水和污物排放系统用苯乙烯共聚物制管和管件.第10部分:燃烧性能、质量控制和安装的推荐 Pipes and fittings made of styrene-copolymerisats for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
DIN 19585-1976 下水道管件.铸铁管件、混凝土管件及与铸铁相连的混凝土制管件的交货技术条件 Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
DIN 19585-1976 下水道管件.铸铁管件、混凝土管件及与铸铁相连的混凝土制管件的交货技术条件 Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
DIN 19695-1977 混凝土管、钢筋混凝土管及预应力混凝土管、管件和混凝土检查井的筒圈的运输和储存说明书 Directions for transporting and storing of concrete pipes, reinforced concrete pipes, prestressed concrete pipes and fittings and concrete manhole shaft rings
DIN 19807-1977 石棉水泥压力管道的专用铁铸件.铸铁管的连接件 Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes
DIN 2410-3-1978 管件.混凝土、钢筋混凝土和预应力混凝土管件的标准的综述 Pipes; Survey of Standards for Pipes from Concrete, Reinforced Concrete and Prestressed Concrete
DIN 24150 Bb.1-1990 通风设备.金属管件和管接头的连接.VO型连接的示例 Ventilation equipment; joints for metal tubes and fittings; examples of type VO joints
DIN 24150-1990 通风设备.金属管件和管接头的连接 Ventilation equipment; joints for metal tubes and fittings
DIN 2605-2-1995 对焊管件.弯管.第2部分:全利用率的相关性 Butt welding fittings - Elbows - Part 2: Full correlation of utilization
DIN 2615-1-1992 对焊钢制管件.带有换算压力系数的丁字管接 Steel butt-welding pipes fittings; tees with reduced pressure factor
DIN 2615-2-1992 对焊钢制管件.在全工作压力下使用的丁字管接 Steel butt-welding pipe fittings; tees for use at full service pressure
DIN 28601-2000 延性铸铁管道和配件.螺纹套管接头.组件、套管、螺丝环、密封环和滑动环 Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
DIN 28602-2000 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
DIN 28602-2000 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
DIN 28603-2002 可锻铸铁管道和配件.插入式连接件.测量、管座和密封垫 Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets
DIN 2880-1999 铸铁管、钢管和管接头的水泥砂浆管衬料的应用 Application of cement mortar lining for cast iron pipes, steel pipes and fittings
DIN 30674-2-1992 球墨铸铁管用水泥砂浆涂层.要求和检验 Cement mortar coatings for ductile iron pipes; requirements and testing
DIN 30674-3-2001 护套式可塑铸铁管道.第3部分:带护套保护的镀锌层 Sheathing ductile cast iron pipes - Part 3: Zinc coating with protective sheathing
DIN 30674-5-1985 球墨铸铁管的外部防护.聚乙烯护套 External protection of ductile cast iron pipes; polyethylene sleeving
DIN 30675-2-1993 掩埋管道的外部防腐.球墨铸铁管的防腐蚀系统 External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes
DIN 30677-2-1988 埋设管件的外部防腐处理.第2部分:加厚式热固性塑料涂层 External corrosion protection of buried valves; heavy-duty thermoset plastics coatings
DIN 32676-2001 饮食业、化工业和医药业用管件.不锈钢管卡箍连接.焊接式 Fittings for the food, chemical and pharmaceutical industries - Clamp connections for stainless steel tubes - Weld-on type
DIN 3475-1993 未处理水和可饮用水用的球墨铸铁管阀和管接头.内部涂搪瓷防腐蚀.质量要求和试验 Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing
DIN 3535-5-1993 煤气供气密封件:煤气管件和煤气设备用橡胶、软木和合成纤维制密封材料.安全性试验要求 Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests
DIN 3544-1-1985 高密度聚乙烯(HDPE)管件.第1部分:攻螺纹管件的要求和试验 High-density polyethylene (HDPE) valves; tapping valves; requirements and test
DIN 3852-2-2000 管件和阀门用管堵和螺纹孔.带惠氏管螺纹的螺塞.各类的总成本 Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
DIN 49012-1982 电气装置用导管和管件.用于重机械应力的金属软管.结构形式和要求 Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements
DIN 6653-1-2004 饮料自动售货系统.附件.第1部分:饮料或基本材料管件 Beverage dispensing systems - Accessories - Part 1: Beverage or base material pipework
DIN 71401-2-1972 第2部分:第2部分:内燃机排液管件 Drain valves for internal combustion engines
DIN 8061 Bb.1-1984 未增塑聚氯乙烯管.PVC-U管和管件的耐化学性 Unplasticized polyvinylchloride pipes; chemical resistance of pipes and fittings of (PVC-U)
DIN 8062-1988 未增塑聚氯乙烯管件(PVC-U.PVC-H).尺寸 Unplasticized polyvinyl chloride (PVC-U, PVC-HI) pipes; dimensions
DIN 8075 Bb.1-1984 高密度聚乙烯管(HDPE).管和管件的耐化学性 High density polyethylene (HDPE) pipes; chemical resistance of pipes and fittings
DIN 8078 Bb.1-1982 聚丙烯(PP)管.管和管件的抗化学性 Pipes of polypropylene (PP); chemical resistance of pipes and fittings
DIN 85004-4-2002 铜镍合金管.第4部分:管件技术规范 Pipelines made of copper-nickel-alloys - Part 4: Technical specification for tubes
DIN 86200-1989 灭火和甲板冲洗设备.软管接头.管件.软管.附件.造船用各类管件产品概要 Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding
DIN 86286-1995 船上卫生设备.卫生间装备和管件的布置 Sanitary furnishing on ships - Positioning of sanitary objects and fittings
DIN EN 10242/A2-2003 可锻铸铁制螺纹管件.修正A2 Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003
DIN EN 10253-1-1999 对焊管管件.第1部分:一般用途和无特殊检验要求的锻造碳钢 Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999
DIN EN 10284-2000 聚乙烯(PE)管道系统用带压缩端的可锻铸铁管件 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
DIN EN 10284-2000 聚乙烯(PE)管道系统用带压缩端的可锻铸铁管件 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
DIN EN 10298-2005 岸上和海底管路用钢管和管件.水泥灰浆内衬.德文版本EN 10298-2005 Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
DIN EN 1092-2-1997 法兰及其连接.按PN标注的管、管件、异形件和附件用圆形法兰.第2部分:铸铁法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges; German version EN 1092-2:1997
DIN EN 1111-1998 卫生设备管件.恒温混合阀(PN 10).通用技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
DIN EN 1112-1997 盥洗室(PN 10)管件用淋浴喷头 Shower outlets for (PN 10) sanitary tapware; German version EN 1112:1997
DIN EN 1113-1997 盥洗室(PN 10)管件用淋浴喷头软管 Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997
DIN EN 1123-2-1999 带插接套管废水管道.纵向焊缝热镀锌钢管道和管件.第2部分:尺寸 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:1999
DIN EN 1123-3-2005 废水系统用带插接套的长焊缝焊接热浸镀锌钢管制管道和管件.第3部分:真空排水系统和船上排水系统的尺寸和特 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
DIN EN 1124-2-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第2部分:S系统.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999
DIN EN 1124-3-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第3部分:X系统.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999
DIN EN 12107-1997 塑料管道系统.注塑热塑性塑料配件、阀门和附件.注塑热塑材料管件持久静液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
DIN EN 12200-1-2001 地上露天用塑料雨水管道系统.未增塑聚氯乙烯.第1部分:管、管件和管道系统规范 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000
DIN EN 12201-3-2003 供水用塑料管道系统.聚乙烯.第3部分:管件 Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2003
DIN EN 12293-1999 塑料管道系统.冷、热水用热塑性塑料管道和管件.检验已安装的组件耐温度循环的试验方法 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999
DIN EN 12295-1999 塑料管道系统.热水和冷水用热塑性塑料管和相关管件.管接头耐循环压力的检测方法 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
DIN EN 12342-1998 用于麻醉器和人工呼吸器的呼吸管件 Breathing tubes intended for use with anaesthetic apparatus and ventilators; German version EN 12342:1998
DIN EN 1254-4-1998 铜和铜合金.管配件.第4部分:把其它连接端头和毛细管或压力接头相连接的管件 Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998
DIN EN 12842-2000 PVC-U或PE管道系统用球墨铸铁管件.要求和试验方法 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000
DIN EN 12842-2000 PVC-U或PE管道系统用球墨铸铁管件.要求和试验方法 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000
DIN EN 1286-1999 卫生器具管件.低压机械调混合阀.通用技术规范 Sanitary tapware - Low pressure mechanical mixing valves; general technical specification; German version EN 1286:1999
DIN EN 1287-1999 卫生器具管件.低压恒温混合阀.通用技术规范 Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
DIN EN 13312-4-2001 生物技术.管路和仪器性能准则.第4部分:管件 Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; German version EN 13312-4:2001
DIN EN 1401-1-1998 非压力地下排水和污水用塑料管道系统.硬聚氯乙烯(PVC-V).第1部分:管、管件和系统规范 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998
DIN EN 14364-2006 压力和无压力排水和排污塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统.管件、配件和连接 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006
DIN EN 14424-2005 带螺旋箍的软管管件 Hose fittings with screwed ferrules; German version EN 14424:2004
DIN EN 1452-3-1999 供水用塑料管道系统.无增塑聚氯乙烯(PVC-U).第3部分:管件 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings; German version EN 1452-3:1999
DIN EN 1455-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道、管件和系 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999
DIN EN 14628-2006 球墨铸铁管、配件和附件.管外层聚乙烯涂层.要求和试验方法 Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods; German version EN 14628:2005
DIN EN 14758-1-2006 无压地下排水和污水塑料管道系统.有矿物调节剂的聚丙烯(PP-MD)管道系统.第1部分:管、管件和系统规范.德文版 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005
DIN EN 14870-1-2005 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第1部分:进气弯头 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004
DIN EN 14870-2-2005 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004
DIN EN 14901-2006 球墨铸铁管、配件和附件.球墨铸铁配件及附件的环氧涂层(重载).要求和试验方法 Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods; German version EN 14901:2006
DIN EN 1519-1-2000 建筑结构中排污(低温和高温)用塑料管道系统.聚乙烯(PE).第1部分:管、管件和系统的规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999
DIN EN 1565-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.苯乙烯共聚掺混料(SAN+PVC).第1部分:管道、管件和系 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998
DIN EN 1566-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:管道、管件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998
DIN EN 200-2005 卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification; German version EN 200:2004
DIN EN 545-2002 水管路用延性铸铁管道、配件、附件及其接头.要求和试验方法; 德文版本 EN 545:2002 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2002
DIN EN 598-1994 排污设施用球墨铸铁管、管件、附件及连接件.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods; German version EN 598:1994
DIN EN 598-1994 排污设施用球墨铸铁管、管件、附件及连接件.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods; German version EN 598:1994
DIN EN 705-1994 塑料管道系统.玻璃纤维增强热固塑料管和管件.回归分析和应用方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994
DIN EN 714-1994 热塑管道系统.压力管道和模压管件之间无末端承载的橡胶密封圈连接件.无端部拉力的流体静力内压力下的密封性 Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
DIN EN 723-1996 铜和铜合金.燃烧法测定铜管或管件内表面碳素的方法 Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings; German version EN 723:1996
DIN EN 727-1995 塑料管道和管道输送系统.热塑塑料管和管件.维卡软化温度(VST)的测定; 德文版本 EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994
DIN EN 736-1-1995 管件.术语.第1部分:管件型号定义; 德文版本 EN 736-1:1995 Valves - Terminology - Part 1: Definition of types of valves; German version EN 736-1:1995
DIN EN 802-1994 塑料管道和管道输送系统.压力管道系统用喷铸热塑管件.压碎造成最大变形的试验方法; 德文版本 EN 802:1994 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
DIN EN 803-1994 塑料管道系统.压力管道用橡胶密封圈连接件的热塑喷铸管件.无端部拉力的抗瞬时内压的试验方法; 德文版本 EN Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
DIN EN 804-1994 塑料管道系统.压力管道用带胶粘套管连接件的热塑喷铸管件.抗流体静力瞬时内压能力的试验方法; 德文版本 EN Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
DIN EN 817-1997 卫生设备管件.机械混合器(PN10).通用技术规范 Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications; German version EN 817:1997
DIN EN 877-2000 建筑物排水用铸铁管道、管件及其接头和附件.要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999
DIN EN 877-2000 建筑物排水用铸铁管道、管件及其接头和附件.要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999
DIN EN 922-1995 塑料管道和管道输送系统.未增塑聚氯乙烯管和管件.测定粘度数值和K值计算用试样制备; 德文版本 EN 922:1994 Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value; German version EN 922:1994
DIN EN 969-1995 燃气管道用球墨铸铁管、管件、附件及其接头.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995
DIN EN 969-1995 燃气管道用球墨铸铁管、管件、附件及其接头.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995
DIN EN 969/A1-1999 球墨铸铁管、管接头、附件及其连接件.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995/A1:1998
DIN EN ISO 3822-1-1999 声学.实验室检测供水设备管件和装置噪声.第1部分:测量方法 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999); German version EN ISO 3822-1:1999
DIN EN ISO 3822-3-1997 声学.实验室检测供水站装置和设备噪音特性.第3部分:管线管件的连接和操作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997
DIN EN ISO 3822-4-1997 声学.实验室检测供水站装置和设备噪音特性.第4部分:特殊管件连接和操作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997
DIN EN ISO 6708-1995 管件.DN(公称尺寸)的定义和选择 (ISO 6708:1995); 德文版本 EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995); German version EN ISO 6708:1995
DIN EN ISO 8434-4-2000 液压及通用金属管件连接.第4部分:接头焊有O形密封圈的24度锥体连接件 Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
DIN ISO 3586-1976 玻璃装置.玻璃管和管件.检验、搬运和使用的一般规则 Glass plant, pipeline and fittings; general rules for testing, handling and use
欧洲铸铁管标准(EN cast iron pipe standards)
CR 13825-2000 镥联接器 CEN论坛“镥管件”任务组向CEN主席的报告 Luer connectors - A report to CEN chef from the CEN forum task group "Luer fittings"
CR 13932-2000 旋转动力泵 管道系统的进口和出口管件建议书 Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping
EN 10224-2002 输送液体（包括人类生活用水）用的非合金钢管和管件　交货技术条件 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
EN 12061-1999 塑料管道系统　热塑性管件　耐冲击试验方法 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
EN 12107-1997 塑料管道系统　压注热塑管件、阀门和辅助设备　管道组件压注用热塑 材料的长期液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
EN 12117-1997 塑料管道系统　热塑管件、阀门和配件　气流速率/压降之间关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
EN 1254-1-1998 铜和铜合金 管件 第1部分：低温焊接或纤焊接到铜管上的毛细管用端头管件 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 1254-2-1998 铜和铜合金 管件 第2部分：铜管用压接端头管件 Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
EN 1254-3-1998 铜和铜合金 管件 第3部分：塑料管用压接端头管件 Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
EN 1254-4-1998+AC-1999 铜和铜合金 管件 第4部分：带有与毛细管端接或压接端头的管件 Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends
EN 1254-5-1998 铜和铜合金 管件 第5部分：纤焊到铜管的毛细管用短端头管件 Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
EN 1329-1-1999 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 硬塑聚氯乙烯(PVC-U) 第1部分：管材、管件和系统规 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 1451-1-1998 建筑物结构内污物和废水排出(低和高温)用塑料管道系统 聚丙烯(PP ) 第1部分：管材、管件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
EN 1452-3-1999 供水塑料管道系统 硬聚氯乙烯(PVC-U) 第3部分：管件 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
EN 1455-1-1999 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 丙烯腈 丁二烯 苯乙烯共聚物 第1部分：管材、管 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system
EN 1505-1997 建筑物通风 矩形截面的金属片通风管道和管件 尺寸 Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions
EN 1506-1997 建筑物通风 环形截面的金属片通风管道和管件 尺寸 Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions
EN 1519-1-1999 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 聚乙烯(PE) 第1部分：管材、管件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
EN 1555-3-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第3部分：管件 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
EN 1565-1-1998 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 苯乙烯共聚混合物(SAN+PVC) 第1部分：管材、管件和 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system
EN 1566-1-1998 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 氯化聚偏氯乙烯(PVC-C) 第1部分：管材、管件和系统 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
EN 1636-3-1997 无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第3部分：管件 Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings
EN 1759-3-2003 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第2部分：铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges
EN 1759-4-2003 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第4部分：铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
EN 1852-1-1997+A1-2001 无压地下排水和污水用塑料管道系统 聚丙烯(PP)、 第一部分：管材、管件及系统规范 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
EN 1905-1998 塑料管道系统 硬聚氯乙烯管、管件和材料 基于氯的总含量评估聚氯乙烯含量的方法 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
EN 1916-2002 无钢筋和有钢筋的混凝土管材及管件 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 26802-1993 钢丝增强的橡胶和塑料软管及软管件 弯抗冲击试验 Rubber and plastics hoses and hose assemblies, wire reinforced- Hydraulic impulse test with flexing (ISO 6802:1991)
EN 545-2002 给水管道用球墨铸铁管、配件、附件及其接头 要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 598-1994 污水工程用球墨铸铁管、配件、附件和其它接头 要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods
EN 877-1999 建筑物排水用铸铁管和配件及其接头和附件 要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
EN 969-1995+A1-1998 煤气管道用球墨铸铁管、配件、附件及其接头 要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN ISO 12162-1995 压力用热塑性塑料管材和管件分级和命名　总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient (ISO 12162:1995)
EN ISO 1746-2000 橡胶或塑料软管和管件　弯曲试验 Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999)
EN ISO 6708-1995 管件　公称尺寸的定义和选择 Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
EN ISO 8308-1995 橡胶和塑料软管和管件　液体透过管壁性能测定 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993)
prEN 14280-2001 地下电缆管道的塑料管线系统 未增塑聚氯乙烯 塑料管、管件及管线规范 Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
prEN 14281-2001 地下电缆管道的塑料管线系统 聚乙烯 塑料管、管件及管线规范 Plastics piping systems for buried cable ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system
prEN 14282-2001 地下电缆管道的塑料管线系统 聚丙烯 塑料管、管件及管线规范 Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system
prEN 14283-2001 一般用途地下管道的塑料管线系统 未增塑聚氯乙烯 塑料管、管件及管线规范 Plastics piping systems for general purpose buried ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
prEN 14284-2001 一般用途地下管道的塑料管线系统 聚乙烯 塑料管、管件及管线规范 Plastics piping systems for general purpose buried ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system
prEN 14285-2001 一般用途地下管道的塑料管线系统 聚丙烯 塑料管、管件及管线规范 Plastics piping systems for general purpose buried ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system
prEN 14364-2002 有或无压排水和排污塑料管线系统 玻璃纤维增强的未饱和的聚酯树脂基热固塑料管 塑料管管件及接头规范 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
prEN 1451-3-1994 建筑物结构内用于污物和污水排放（高/低温）的塑料管道系统 聚丙烯（PP） 第3部分：管件 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 3: Fittings
prEN 1453-5-1994 建筑物内污物和废水排放(低和高温)带结构壁管道的塑料管道系统 硬聚氯乙烯(PVC-U) 第5部分：系统用管件 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) within the building structure; unplasticized poly(vinyl chloride) (PVC-U); part 5: fittings for purpose of the system
prEN 1455-3-1994 建筑物结构内用于污物和污水排放（高/低温）的塑料管道系统 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第3部分 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 3: Fittings
prEN 1456-3-1994 地上和地下污废水压力排放用塑料管道系统 硬已烯(聚氯已烯)(PVC-U) .第3部分：管件 Plastics piping systems for underground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
prEN 1519-3-1994 建筑物结构内污物和污水排放(低和高温)塑料管道系统 聚已烯(PE) 第3部分：管件 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 3: Fittings
prEN 1565-3-1994 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 苯乙烯共聚混合物(SAN+PVC) 第3部分：管件 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 3: Fittings
prEN 1566-3-1994 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 氯化聚偏氯乙烯(PVC-C) 第3部分：管件 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
prEN 1759-1-2000 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第1部分：钢法兰NPS1/2到24 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 1: Steel flanges, NPS 1/2 to 24
prEN 1796-3-1995 有或无压力供水用塑料管道系统聚合物树脂（UP）基玻璃纤维增强热固性塑料（GRP） 第3部分：管件 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 3: Fittings
prEN 2218-1981 航空航天系列 钢FE-PL52 S 980 MPa R<(Index)m> 1180 MPa 结构用管件a Steel FE-PL52 S, 980 MPa R<(Index)m> 1180 MPa; tubes for structures a 4 mm d ≥ 5 a; aerospace series
prEN 2219-1981 航空航天系列 钢FE-PL52 S 1030 MPa R<(Index)m> 1230 MPa 结构用管件a Steel FE-PL52 S, 1030 MPa R<(Index)m> 1230 MPa; tubes for structures a 2 mm d ≥ 5 a; aerospace series
prEN ISO 7686-2003 塑料管材与管件　不透明度测定 Plastics pipes and fittings - Determination of opacity (ISO/DIS 7686:2003) / Note: Intended as replacement for EN 578 (1993-07).
SY/T 0609-2006 优质钢制对焊管件规范 Specification for high test wrought butt welding fittings
中国铸铁管标准(GB cast iron pipe standards)
DL/T 695-1999 电站钢制对焊管件 ()
DL/T 935-2005 钢塑复合管和管件 ()
GB 15558.2-2005 燃气用埋地聚乙烯(PE)管道系统第2部分:管件 Buried Polyethylene(PE)piping systems for the supply of gaseous fuels Part 2:Fittings
GB/T 12459-2005 钢制对焊无缝管件 Steel butt-welding seamless pipe fittings
GB/T 12772-1999 排水用柔性接口铸铁管及管件 Cast iron pipes and fittings with flexible joint sewerage
GB/T 13021-1991 聚乙烯管材和管件炭黑含量的测定热失重法 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis
GB/T 13295-2003 水及燃气管道用球墨铸铁管、管件和附件 Ductile iron pipes，fittings and accessories for water or gas applications
GB/T 13401-2005 钢板制对焊管件 Steel plate butt-welding pipe fittings
GB/T 13663.2-2005 给水用聚乙烯(PE)管道系统第2部分:管件 Polyethylene(PE)pipings systems for water supply Part 2:Fittings
GB/T 14383-1993 锻钢制承插焊管件 Forged steel socket welding pipe fittings
GB/T 14626-1993 锻钢制螺纹管件 Forged steel threaded pipe fittings
GB/T 15819-2006 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification
GB/T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验 Test of resistance to pull out ofjoints between polyethylene (PE) pressure pipes and fittings
GB/T 17185-1997 钢制法兰管件 Steel pipe fittings for flanged joint
GB/T 17241.1-1998 铸铁管法兰类型 Synoptic table for cast iron pipe flanges
GB/T 17241.2-1998 铸铁管法兰盖 Cast iron pipe blank flanges
GB/T 17241.3-1998 带颈螺纹铸铁管法兰 Hubbed threaded cast iron pipe flanges
GB/T 17241.4-1998 带颈平焊和带颈承插焊铸铁管法兰 Hubbed slip-on-welding and hubbed socket welding cast iron pipe flanges
GB/T 17241.5-1998 管端翻边带颈松套铸铁管法兰 Loose hubbed cast iron pipe flanges for lapped pipe end
GB/T 17241.6-1998 整体铸铁管法兰 Integral cast iron pipe flanges
GB/T 17241.7-1998 铸铁管法兰技术条件 Specifications for cast iron pipe flanges
GB/T 17391-1998 聚乙烯管材与管件热稳定性试验方法 Test method for thermal stability of polyethylene pipes and fittings
GB/T 17456-1998 球墨铸铁管外表面喷锌涂层 Ductile iron pipes--External zinc-spray coating
GB/T 17457-1998 球墨铸铁管水泥砂浆离心法衬层一般要求 Ductile iron pipes--Centrifugal cement mortar lining--General requirements
GB/T 17458-1998 球墨铸铁管水泥砂浆离心法衬层新拌砂浆的成分检验 Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly appliedmortar
GB/T 17459-1998 球墨铸铁管沥青涂层 Ductile iron pipes--Bitumen coating
GB/T 18251-2000 聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes，fittings and compounds
GB/T 18474-2001 交联聚乙烯(PE-X)管材与管件交联度的试验方法 Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content
GB/T 18475-2001 热塑性塑料压力管材和管件用材料分级和命名总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient
GB/T 18742.3-2002 冷热水用聚丙烯管道系统第3部分:管件 Polypropylene piping systems for hot and cold water installations--Part 3:Fittings
GB/T 18991-2003 冷热水系统用热塑性塑料管材和管件 Thermoplastics pipes and fittings forhot and cold water systems
GB/T 18993.3-2003 冷热水用氯化聚氯乙烯(PVC-C)管道系统第3部分: 管件 Chlorinated poly(Vinyl chloride) piping systems for hot and cold water installations--Part 3: Fittings
GB/T 18998.3-2003 工业用氯化聚氯乙烯(PVC-C)管道系统第3部分: 管件 Chlorinated poly(vinyl chloride)(PVC-C) piping systems for industrial applications--Part 3: Fittings
GB/T 19228.1-2003 不锈钢卡压式管件 Stainless steel press-fittings
GB/T 19228.2-2003 不锈钢卡压式管件连接用薄壁不锈钢管 Light gauge stainless steel pipes for stainless steel press-fittings
GB/T 19228.3-2003 不锈钢卡压式管件用橡胶O形密封圈 O-rings for stainless steel press-fittings
GB/T 19278-2003 热塑性塑料管材、管件及阀门通用术语及其定义 General terms and their definitions of thermoplastic pipes，fittings and valves
GB/T 19473.3-2004 冷热水用聚丁烯(PB)管道系统第3部分:管件 Polybutylene(PB) piping systems for hot and cold water installations--Part 3:Fittings
GB/T 19712-2005 塑料管材和管件聚乙烯(PE)鞍形旁通抗冲击试验方法 Plastics pipes and fittingsPolyethylene(PE) tapping tees Test method for impact resistance
GB/T 19806-2005 塑料管材和管件聚乙烯电熔组件的挤压剥离试验 Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies
GB/T 19807-2005 塑料管材和管件聚乙烯管材和电熔管件组合试件的制备 Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting
GB/T 19808-2005 塑料管材和管件公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
GB/T 19809-2005 塑料管材和管件聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion
GB/T 19810-2005 聚乙烯(PE)管材和管件热熔对接接头拉伸强度和破坏形式的测定 Polyethylene(PE)pipe and fittings-Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
GB/T 19993-2005 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling
GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
GB/T 20207.2-2006 丙烯腈－丁二烯－苯乙烯（ABS）压力管道系统第2部分：管件 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 2: fittings
GB/T 20674.1-2006 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusion
GB/T 20674.2-2006 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
GB/T 3287-2000 可锻铸铁管路连接件 Malleable cast iron pipe fittings
GB/T 3420-1982 灰口铸铁管件 Gray iron castigs for pipe fittings
GB/T 3422-1982 连续铸铁管 Cast-iron pressure pipe made by continuous casting process
GB/T 5836.2-2006 建筑排水用硬聚氯乙烯（PVC-U）管件 Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste inside buildings
GB/T 6483-1986 柔性机械接口灰口铸铁管 Soft mechanical joint grey cast iron pipe
GB/T 6567.3-1986 管路系统的图形符号管件 Graphical symbols for piping systems--Piping accessories
GB/T 6567.5-2003 管路系统的图形符号管路、管件和阀门等图形符号的轴测图画法 Graphical symbols for piping systems--Axonometric representation of graphical symbols for piping，piping accessories and valves etc
GB/T 8714-1988 梯唇型橡胶圈接口铸铁管 Grey cast iron pipes with rubber ring of ladder-lip-shaped
GB/T 8715-1988 柔性机械接口铸铁管件 Soft mechanical joint grey cast iron fittings
GB/T 8801-1988 硬聚氯乙烯 (PVC-U) 管件坠落试验方法 Test method for unplasticized (PVC-U) fittings by falling
GB/T 8802-2001 热塑性塑料管材、管件维卡软化温度的测定 Thermoplastics pipes and fitting--Determination of vicat softening temperature
GB/T 8803-2001 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)，acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings--Hot oven test method
HG/T 20538-1992 衬塑（PP、PE、PVC）钢管和管件 ()
HG/T 20539-1992 增强聚丙烯（FRPP）管子和管件 ()
HG/T 2128-1991 耐酸酚醛塑料制化工设备、管、管件技术条件 ()
HG/T 21501-1993 衬胶钢管和管件 ()
HG/T 21561-1994 丙烯腈—丁二烯—苯乙烯（ABS）管和管件 ()
HG/T 21562-1994 衬聚四氟乙烯钢管和管件 ()
HG/T 21579-1995 聚丙烯/玻璃钢（PP/FRP）复合管及管件 ()
HG/T 21631-1990 钢制有缝对焊管件 ()
HG/T 21633-1991 玻璃钢管和管件 ()
HG/T 21634-1988 锻钢承插焊管件 ()
HG/T 21635-1987 碳钢、低合金钢无缝对焊管件 ()
HG/T 21636-1987 玻璃钢/聚氯乙烯（FRP/PVC)复合管和管件 ()
HG/T 2435-1993 玻璃管和管件 ()
HG/T 2436-1993 玻璃管和管件耐压试验方法 ()
HG/T 2437-2006 塑料衬里复合钢管和管件 Steel pipes and fitting lined with plastic
HG/T 3691-2001 工业用钢骨架聚乙稀塑料复合管件 ()
HG/T 3705-2003 金属网聚四氟乙烯复合管与管件 ()
HG/T 3707-2003 工业用孔网钢骨架聚乙烯复合管件 ()
HG/T 3731-2004 玻璃纤维增强聚氯乙烯复合管和管件 ()
JB/T 1308.2-1999 PN250MPa阀门、管件和紧固件技术条件 ()
JB/T 2768-1992 PN16.0～32.0MPa 管子、管件、阀门端部尺寸 ()
JB/T 2778-1992 PN16.0～32.0MPa 管件和紧固件温度标记 ()
JB/T 450-1992 PN16.0～32.0MPa 锻造角式高压阀门、管件、紧固件 技术条件 ()
JB/T 5976.1-1992 PNO.6MPa可锻铸铁管法兰盖 ()
JB/T 5976.2-1992 PN1.0MPa可锻铸铁管法兰盖 ()
JB/T 5976.3-1992 PN1.6MPa可锻铸铁管法兰盖 ()
JB/T 5976.4-1992 PN2.5MPa可锻铸铁管法兰盖 ()
JB/T 5976.5-1992 PN4.0MPa可锻铸铁管法兰盖 ()
JB/T 5982-1992 可锻铸铁管法兰用石棉橡胶垫片 ()
JB/T 6308-2000 离心铸管机 技术条件 ()
JB/T 7525-1994 聚丙烯 玻璃纤维增强塑料复合管和管件 ()
JB/T 7870-1997 喷灌用金属薄壁管及管件 ()
QB/T 2003-1994 食品工业用不锈钢对缝焊接管件 ()
QB/T 2480-2000 建筑用硬聚氯乙烯(PVC-U)雨落水管材及管件 ()
QB/T 3802-1999 化工用硬聚氯乙烯管件 Unplasticized polyvinyl chloride(PVC)fittings for chemical industry
QC/T 669-2000(2005) 汽车空调(HFC-134a)用管接头和管件 ()
SB/T 10355-2002 制冷系统和热泵—软管件、隔振器和膨胀接头—要求、设计与安装 ()
SY/T 0510-1998(2006年确认) 钢制对焊管件 ()
SY/T 0518-2002 油气管道钢制对焊管件设计规程 ()
SY/T 6266-2004 低压玻璃纤维管线管和管件 ()
SY/T 6701-2007 增强MC尼龙管和尼龙—钢复合管及管件 Reinforced MC nylon pipes and nylon-steel composite pipes and fittings
YB/T 177-2000(2006年确认) 连续铸造球墨铸铁管 ()
YS/T 583-2006 热锻水暖管件用黄铜棒 ()
YS/T 584-2006 电极材料用铬、锆青铜管件 ()
ISO铸铁管标准(ISO cast iron pipe standards)
ISO 10147-2004 交联聚乙烯(PE-X)管材和管件.通过测定凝胶含量估算交联度 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
ISO 10802-1992 球墨铸铁管道 安装后水压试验 Ductile iron pipelines; hydrostatic testing after installation
ISO 10803-1999 球墨铸铁管的设计方法 Design method for ductile iron pipes
ISO 10804-1-1996 球墨铸铁管道用减震连接系统 第1部分:设计规则和定型试验 Restrained joint systems for ductile iron pipelines - Part 1: Design rules and type testing
ISO 10838-1-2000 燃气用聚乙烯管道系统的机械式管件 第1部分:公称外径小于或等于63mm的管道用金属管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
ISO 10838-2-2000 燃气用聚乙烯管道系统的机械式管件 第2部分:公称外径大于63mm的管道用金属管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
ISO 10838-3-2001 燃气用聚乙烯管道系统的机械管件 第3部分：标称外径小于或等于63mm的热塑管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
ISO 10928-1997 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 回归分析及其使用方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
ISO 10952-1999 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 在变形条件下断面内部耐化学腐蚀性的测定 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
ISO 11413-1996 塑料管材和管件 聚乙烯(PE)管和电熔配件的组装试件的制备 Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
ISO 11414-1996 塑料管材和管件 用对熔连接的聚乙烯(PE)管材/管材或管材/管件组装试样的制备 Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
ISO 11424-1996 内燃机的空气和真空系统用橡胶软管及其管件 规范 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
ISO 12162-1995 压力用热塑性塑料管材和管件分级和命名 总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient
ISO 12176-1-2006 塑料管材和管件.聚乙烯系统的熔接设备.第1部分:对熔接 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion
ISO 12176-2-2000 塑料管材和管件 聚乙烯系统的焊接设备 第2部分:电熔焊 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
ISO 12176-3-2006 塑料管材和管件.聚乙烯系统的熔焊接设备.第3部分:操作者标记 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operator's badge
ISO 12176-4-2003 塑料管材和管件.聚乙烯系统的熔接设备.第4部分:可追踪性编码 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding
ISO 13761-1996 塑料管材和管件 20℃以上使用的聚乙烯管道的压力折减系数 Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 C
ISO 13924-2000 塑料管材和管件 聚乙烯/金属转换管件、聚乙烯鞍型三通和聚乙烯支管管托的弯曲拉伸循环试验 Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
ISO 13951-2001 塑料管道系统 聚烯烃管与管或管与管件之间的组件耐拉申负载试验方法 Plastics piping systems - Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
ISO 13953-2001 聚乙烯管材和管件 拉申强度的测定和熔接对接接头试件的失效模型 Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint
ISO 13954-1997 塑料管材和管件 公称外径大于或等于90mm的聚乙烯(PE)电熔焊组合件的剥离分层试验 Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955-1997 塑料管材和管件 聚乙烯(PE)电熔焊组件的压缩分层试验 Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies
ISO 13957-1997 塑料管材和管件 聚乙烯(PE)鞍型三通 耐冲击试验方法 Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance
ISO 13966-1998 热塑性塑料管材和管件 公称环刚度 Thermoplastics pipes and fittings - Nominal ring stiffnesses
ISO 13967-1998 热塑性塑料管件 环刚度的测定 Thermoplastics fittings - Determination of ring stiffness
ISO 14236-2000 塑料管材和管件 给水系统聚乙烯压力管用压紧式机械连接件 Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
ISO 15590-1-2001 石油和天然气工业 管道输送系统用诱导弯头、管件和法兰 第1部分：诱导弯头 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
ISO 15590-2-2003 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
ISO 15590-3-2004 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第3部分:法兰 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
ISO 16132-2004 球墨铸铁管和配件.水泥灰浆衬套的封装层 Ductile iron pipes and fittings - Seal coats for cement mortar linings
ISO 16134-2006 球墨铸铁管的抗震和抗下沉的设计 Earthquake- and subsidence-resistant design of ductile iron pipelines
ISO 16241-2005 管和管件用聚乙烯材料耐慢速裂纹伸展的测定的缺口拉伸试验 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
ISO 1746 Technical Corrigendum 1-1999 橡胶或塑料软管和管件 弯曲试验 技术勘误1 Rubber or plastics hoses and tubing - Bending tests; Technical corrigendum 1
ISO 1746-1998 橡胶或塑料软管和管件 弯曲试验 Rubber or plastics hoses and tubing - Bending tests
ISO 2035-1974 压力下使用的弹性密封圈式连接的硬聚氯乙烯(PVC)注塑管件 耐压试验 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure; Pressure-resistance test
ISO 2044-1974 压力管用注塑溶剂粘接的硬聚氯乙烯(PVC)承口管件 内水压试验 Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe; Hydraulic internal pressure test
ISO 2507-1-1995 热塑性塑料管材和管件 维卡软化温度 第1部分:一般试验方法 Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method
ISO 2507-2-1995 热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
ISO 2507-3-1995 热塑性塑料管材和管件 维卡软化温度 第3部分:丙烯腈-丁二烯-苯乙烯共聚物和丙烯腈-丁二烯-丙烯酸酯共聚物管 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 2531-1998 输水和输气用球墨铸铁管、配件、附件及其接头 Ductile iron pipes, fittings, accessories and their joints for water or gas applications
ISO 2536-1974 公制系列、硬聚氯乙烯(PVC)压力管材和管件 法兰尺寸 Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series; Dimensions of flanges
ISO 264 ADD 1-1982 承压管用硬聚氯乙烯平承口管件 安装长度 公制系列 补充1 Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure; laying lengths; metric series; addendum 1
ISO 264-1976 承压管用硬聚氯乙烯平承口管件 安装长度 公制系列 Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure; Laying lengths; Metric series
ISO 265-1-1988 塑料管材和管件 民用及工业用废水管的管件 基本尺寸 公制系列 第1部分:硬聚氯乙烯(PVC-U) Pipes and fittings of plastics materials; fittings for domestic and industrial waste pipes; basic dimensions: metric series; part 1: unplasticized poly(vinyl chloride) (PVC-U)
ISO 3419-1981 非合金钢和合金钢对焊管件 Non-alloy and alloy steel butt-welding fittings
ISO 3458-1976 聚乙烯(PE)压力管材和管件间的装配接头 内压密封试验 Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under internal pressure
ISO 3459-1976 聚乙烯(PE)压力管 用机械式管件装配的接头 内压试验法和要求 Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test method and requirement
ISO 3501-1976 聚乙烯(PE)压力管材和管件间的装配接头 抗拉拔试验 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of resistance to pull out
ISO 3503-1976 聚乙烯(PE)压力管材和管件间的装配接头 弯曲时承受内压的密封试验 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending
ISO 3514-1976 氯化聚氯乙烯(CPVC)管材和管件 密度的测定和规范 Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of density
ISO 3545-1-1989 钢管和管件 规范中使用的符号 第1部分:圆形截面的管和管状附件 Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section
ISO 3545-2-1989 钢管和管件 规范中使用的符号 第2部分:正方形和矩形中空截面 Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections
ISO 3545-3-1989 钢管和管件 规范中使用的符号 第3部分:圆形截面管件 Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section
ISO 3603-1977 弹性密封圈式硬聚氯乙烯(PVC)压力管件 密封压力试验 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness
ISO 3604-1976 弹性密封圈式硬聚氯乙烯(PVC)压力管件 外水压条件下的密封压力试验 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness under conditions of external hydraulic pressure
ISO 3663-1976 聚乙烯(PE)压力管材和管件 公制系列 法兰尺寸 Polyethylene (PE) pressure pipes and fittings, metric series; Dimensions of flanges
ISO 4081-2005 内燃机用制冷系统用橡胶软管和管件.规范 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
ISO 4132-1979 承压管用硬聚氯乙烯(PVC)和金属的接头管件安装长度和螺纹尺寸 公制系列 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths and size of threads; Metric series
ISO 4179-2005 压力和非压力管道用球墨铸铁管和配件.水泥灰浆内衬 Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
ISO 4422-1-1996 给水用硬聚氯乙烯(PVC-U)管材和管件 规范 第1部分:总则 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 1: General
ISO 4422-2-1996 给水用硬聚氯乙烯(PVC-U)管材和管件 规范 第2部分:管材(有或无整体承口管) Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 2: Pipes (with or without integral sockets)
ISO 4422-3-1996 给水用硬聚氯乙烯(PVC-U)管材和管件 规范 第3部分:管件和连接件 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 3: Fittings and joints
ISO 4422-4-1997 给水用硬聚氯乙烯(PVC-U)管材和管件 规范 第4部分:阀及辅助设备 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 4: Valves and ancillary equipment
ISO 4422-5-1997 给水用硬聚氯乙烯(PVC-U)管材和管件 规范 第5部分:系统适宜性 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 5: Fitness for purpose of the system
ISO 4434-1977 承压管用硬聚氯乙烯(PVC)接头管件 安装长度和螺纹尺寸 公制系列 Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure; Laying length and size of threads; Metric series
ISO 4439-1979 硬聚氯乙烯(PVC)管材和管件 密度的测定和规范 Unplasticized polyvinyl chloride (PVC) pipes and fittings; Determination and specification of density
ISO 4440-1-1994 热塑性塑料管和管件 熔化质量的测定流量速率 第1部分:试验方法 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test methos
ISO 4440-2-1994 热塑性塑料管和管件 熔化质量的测定流量速率 第2部分:试验条件 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions
ISO 49 Technical Corrigendum 1-1997 符合ISO 7-1可锻铸铁管螺纹接头 技术勘误1 Malleable cast iron fittings threaded to ISO 7-1; Technical Corrigendum 1
ISO 49-1994 符合ISO 7-1可锻铸铁管螺纹接头 Malleable cast iron fittings threaded to ISO 7-1
ISO 5256-1985 地下或水下管路用钢管和管件 管内外涂沥青或沥青油衍生物 Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials
ISO 6455-1983 承压管用带弹性密封圈型接头的硬聚氯乙烯(PVC)管件 安装长度的测定 公制系列 Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure; Dimensions of laying lengths; Metric series
ISO 6708-1995 管件 公称尺寸的定义和选择 Pipework components - Definition and selection of DN (nominal size)
ISO 6964-1986 聚烯烃管材和管件 用热失重法测定碳黑含量 试验方法和基本规范 Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
ISO 7005-2-1988 金属法兰 第2部分:铸铁管法兰 Metallic flanges; part 2: cast iron flanges
ISO 7245-1984 丙烯腈一丁二烯一苯乙烯共聚物(ABS)管材和管件 注塑和挤出料的总规范 Pipes and fittings of acrylonitrile-butadiene- styrene (ABS); General specification for moulding and extrusion materials
ISO 7246-1984 丙烯腈/苯乙烯/丙烯酸酯(ASA)管材和管件 注塑和挤出料的总规范 Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and extrusion materials
ISO 727-1-2002 压力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.第1部分:米制系 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
ISO 727-2-2005 压力管件用由未增塑聚氯乙烯、氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.第2部分:英制系 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
ISO 7279-1984 承压管用聚丙烯(PP)管件 用热工具熔接的承口 公制系列 承口尺寸 Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series; Dimensions of sockets
ISO 7370-1983 玻璃纤维增强热固性塑料(GRP)管材和管件 公称直径、规定直径和标准长度 Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths
ISO 7511-1999 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 确定短期内压下管壁密封性的检验方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
ISO 8085-1-2001 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第1部分：采用加热工具的插口熔接管件 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 1: Fittings for socket fusion using heated tools
ISO 8085-2 Technical Corrigendum 1-2001 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第2部分：对熔接、采用加热工具的插口熔接以及用 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings; Technical Corrigendum 1
ISO 8085-2-2001 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第2部分：对熔接、采用加热工具的插口熔接以及用 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
ISO 8085-3-2001 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第3部分：电熔接管件 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 3: Electrofusion fittings
ISO 8179-1-2004 球墨铸铁管.外部镀锌.第1部分:终饰层用金属锌 Ductile iron pipes - External zinc-based coating - Part 1: Metallic zinc with finishing layer
ISO 8179-2-1995 球墨铸铁管 外部镀锌 第2部分:终饰层用富锌涂层 Ductile iron pipes - External zinc coating - Part 2: Zinc rich paint with finishing layer
ISO 8283-1-1991 塑料管材和管件 建筑物内排水系统的承口和插口尺寸 第1部分:硬聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C) Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 1: unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
ISO 8283-2-1992 塑料管材和管件 建筑物内排水系统的承口和插口尺寸 第2部分:聚乙烯(PE) Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 2: polyethylene (PE)
ISO 8283-3-1992 塑料管材和管件 建筑物内排水系统的承口和插口尺寸 第3部分:聚丙烯(PP) Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 3: polypropylene (PP)
ISO 8283-4-1992 塑料管材和管件 建筑物内排水系统的承口和插口尺寸 第4部分:丙烯腈/丁二烯/苯乙烯(ABS) Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 4: acrylonitrile/butadiene/styrene (ABS)
ISO 8308-1993 橡胶和塑料软管和管件 液体透过管壁性能测定 Rubber and plastics hoses and tubing; determination of transmission of liquids through hose and tubing walls
ISO 8361-1-1991 热塑性塑料管和管件 吸水性 第1部分:一般试验方法 Thermoplastics pipes and fittings; water absorption; part 1: general test method
ISO 8361-2-1991 热塑性塑料管和管件 吸水性 第2部分:硬聚氯乙烯(PVC-U)管材和管件试验条件 Thermoplastics pipes and fittings; water absorption; part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
ISO 8361-3-1991 热塑性塑料管和管件 吸水性 第3部分:丙烯腈(ABS)管材和管件试验条件 Thermoplastics pipes and fittings; water absorption; part 3: test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
ISO 8572-1991 玻璃纤维增强热塑性塑料管材和管件 与压力有关的定义,包括它们之间关系,以及安装和连接的术语 Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing
ISO 8639-2000 玻璃增强热固性塑料(GRP)管材和管件 柔性连接的密封性试验方法 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness of flexible joints
ISO 8772-1991 埋地污废水排放用高密度聚乙烯管材和管件 规范 High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications
ISO 8795-2001 输送人类生活用水用塑料管道系统 流动评定 塑料管道和管件及其接头的流动值的测定 Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints
ISO 9349-2004 预绝缘球墨铸铁管道系统 Preinsulated ductile iron pipeline systems
ISO 9356-1989 带或不带连接管件的聚烯烃管总成 耐内压 试验方法 Polyolefin pipe assemblies with or without jointed fittings; resistance to internal pressure; test method
ISO 9623-1997 压力流体用聚乙烯(PE)/金属和聚丙烯(PP)/金属接头管件 螺纹的设计长度和尺寸 公制系列 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series
ISO 9625-1993 灌溉用聚乙烯压力管的机械式连接管件 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
ISO 9853-1991 压力管道系统用硬聚氯乙烯(PVC-U)管件 扁平试验 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushing test
ISO/TR 10358-1993 塑料管材和管件 综合抗化学性能分类表 Plastics pipes and fittings; combined chemical-resistance classification table
ISO/TR 10837-1991 煤气管材和管件用聚乙烯的热稳定性的测定 Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
ISO/TR 11295-1992 用塑料管材和管件对管道系统的修复技术 Techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings
ISO/TR 11647-1996 聚乙烯管材和管件的可熔焊性 Fusion compatibility of polyethylene (PE) pipes and fittings
ISO/TR 13950-1997 塑料管材和管件 电熔接用自动识别系统 Plastics pipes and fittings - Automatic recognition systems for electrofusion
ISO/TR 16913-1999 塑料管材和管件 试验类型的定义 Plastics pipes and fittings - Definitions of types of test
ISO/TR 7074-1986 地下排污、废水工程用塑料管材和管件的性能要求 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
ISO/TS 10839-2000 供应气体燃料的聚乙烯管材和管件 设计、搬运和安装实施规范 Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design, handling and installation
日本铸铁管标准(JIS cast iron pipe standards)
JIS A5314-1998 球墨铸铁管用砂浆衬里
ダクタイル鋳鉄管モルタルライニング Mortar lining for ductile iron pipes
JIS B2239-2004 铸铁管法兰
鋳鉄製管フランジ Cast iron pipe flanges
JIS B2301-2004 螺纹式可锻铸铁管接头
ねじ込み式可鍛鋳鉄製管継手 Screwed type malleable cast iron pipe fittings
JIS D3607-1-2002 柴油发动机.高压燃料喷射管道用钢制管件.第1部分:无缝冷拉单壁管件的要求
ディーゼル機関　―　高圧燃料噴射管の鋼管　―　第１部：冷間仕上継目無単層鋼管の要求事項 Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes
JIS D3607-2-2002 柴油发动机.高压燃料喷射管道用钢制管件.第2部分:复合管件的要求
ディーゼル機関　―　高圧燃料噴射管の鋼管　―　第２部：複合鋼管の要求事項 Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 2: Requirements for composite tubes
JIS F7335-1996 造船.软管连接件和管件
船用ホース金物 Shipbuilding -- Hose connections and fittings
JIS F7335 AMD 1-2006 造船.软管连接件和管件(修改件1)
Shipbuilding -- Hose connections and fittings (Amendment 1)
JIS G3451-1987 输水用涂层钢管的异型管件
水輸送用塗覆装鋼管の異形管(廃止) Fittings of coated steel pipes for water service
JIS G5525-2000 铸铁排水管道和管件
排水用鋳鉄管 Cast-iron drainage pipes and fittings
JIS G5526-1998 球墨铸铁管
ダクタイル鋳鉄管 Ductile iron pipes
JIS G5528-1984 球墨铸铁管道和配件内壁环氧粉末涂层
ダクタイル鋳鉄管内面エポキシ樹脂粉体塗装 Epoxy-powder coating for interior of ductile iron pipes and fittings
JIS G5528 AMD 1-2006 球墨铸铁管道及配件内壁用环氧粉末覆层(修改件1)
ダクタイル鋳鉄管内面エポキシ樹脂粉体塗装（追補１） Epoxy-powder coating for interior of ductile iron pipes and fittings (Amendment 1)
JIS H0515-1992 钛管道和管件的涡流检验
チタン管の渦流探傷検査方法 Eddy current inspection of titanium pipes and tubes
JIS H0516-1992 钛管道和管件的超声波检验
チタン管の超音波探傷検査方法 Ultrasonic inspection of titanium pipes and tubes
JIS H4090-1990 铝和铝合金焊接管和管件
アルミニウム及びアルミニウム合金溶接管 Aluminium and aluminium alloy welded pipes and tubes
JIS H4631-2006 热交换器用钛及钛合金管件
熱交換器用チタン管及びチタン合金管 Titanium and titanium alloy tubes for heat exchangers
JIS K6330-9-2003 橡胶和塑料软管的测试方法.第9部分:软管和管件的弯曲性能
ゴム及びプラスチックホース試験方法－第９部：ホース及び管の曲げ特性 Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing
JIS K6771-1995 柔性乙烯管件
軟質ビニル管 Flexible vinyl tube
JIS K6914-1995 叠层热固性聚合物管件
熱硬化性樹脂積層管 Laminated thermosetting tubes
JIS K6914 AMD 1-2006 叠层热固性聚合物管件（修改件1）
熱硬化性樹脂積層管（追補１） Laminated thermosetting tubes (Amendment 1)
JIS S2190-1993 橡胶管件的管箍
ガス用ゴム管バンド Bands for rubber tube
JIS T7225-1993 气管内导管.第5部分:根套和管件试验要求和方法
気管チューブ　―　第５部　カフとチューブの必要事項及び試験方法 Tracheal tubes -- Part 5: Requirements and methods of test for cuffs and tubes
JIS T7227-1-1998 气管造口术管件.第1部分:成人用管件连接器
気管切開チューブ　―　第１部　成人用気管切開チューブコネクタ Tracheostomy tubes -- Part 1: Connectors for tubes for adults
JIS T7227-2-1998 气管造口术管件.第2部分:成人用管件连接器的基本要求
気管切開チューブ　―　第２部　成人用チューブのための基本的要求事項 Tracheostomy tubes -- Part 2: Basic requirements for tubes for adults
JIS T7227-3-1998 气管造口术管件.第3部分:儿科气管造口术管件
気管切開チューブ　―　第３部　小児用気管切開チューブ Tracheostomy tubes -- Part 3: Paediatric tracheostomy tubes
JIS W1300-2002 航空航天.管件.外部直径和厚度.米制尺寸
航空宇宙　―　管　―　外径及び肉厚　―　メートル寸法系列 Aerospace -- Tubing -- Outside diameters and Thicknesses -- Metric dimensions
JIS W1832-2002 航空航天系列.流体系统.管件和管接头组件的试验方法
航空宇宙　―　流体系統　―　管?継手組立の試験方法 Aerospace -- Fluid systems -- Test methods for tube/fitting assemblies
JIS W1904-1995 管配件、扩口管件和流体连接器
航空機用管継手通則 Fittings, flared tube, fluid connection
JIS Z3081-1994 铝管材和管件焊缝的超声波斜束检验方法
アルミニウム管溶接部の超音波斜角探傷試験方法 Methods of ultrasonic angle beam examination for welds of aluminium pipes and tubes
法国铸铁管标准(NF cast iron pipe standards)
NF A48-720-1999 建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证 (Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.)
NF A48-801-2002 水管用球墨铸铁管、配件和附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods.)
NF A48-810-1995 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
NF A48-810/A1-1999 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
NF A48-820-1994 污水排放用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.)
NF A48-840-1984 铸造产品.铸制产品.球墨铸铁管道部件.法兰盘系列.法兰盘.定义.尺寸.规范 (FOUNDRY PRODUCTS. SPHEROIDAL GRAPHITE CAST IRON PIPES. FLANGES SERIES. FLANGES DEFINITION. DIMENSIONS. SPECIFICATIONS.)
NF A48-850-1984 铸造产品.溢流管用球墨铸铁管道部件.溢流管.承插件系列.技术规范 (FOUNDRY PRODUCTS. DUCTILE CAST IRON PIPING ELEMENTS FOR PRE-INSULATED PIPELINE. PRE-INSULATED PIPES,SOCKET SERIE. TECHNICAL SPECIFICATION.)
NF A48-851-1985 铸造产品.压力管道用球墨铸铁管.聚氨酯涂层 (FOUNDRY PRODUCTS. DUCTILE IRON PIPES FOR PRESSURE PIPELINES. POLYURETHAN EXTERNAL COATING.)
NF A48-860-1981 铸造产品.承压管道用可锻铸铁管道部件.承插系列.GS快速接头.连接尺寸和连接附件 (Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.)
NF A48-870-1981 铸造产品.承接管道用可锻铸铁管道部件.承插系列.GS标准接头.连接尺寸和连接附件 (Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.)
NF A48-902-1985 铸造产品.压力管道用球墨铸铁管.离心水泥砂浆内饰面.新涂覆砂浆成分的控制 (Foundry products. Ductile iron pipes for pressure pipelines. Contrifugal cement mortar internal lining. Composition controls of freshly applied mortar.)
NF D18-201-1989 卫生设备管件.排放阀和混合阀的一般技术规范(公称尺寸1/2)PN 10.最低水压0.05MPa(0.5巴) (Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) pn 10. Minimum flow pressure of 0,05 MPa (0,5 bar).)
NF D18-208-1997 (PN 10)卫生间管件的淋浴用软管 (Showers hoses for (PN 10) sanitary tapware.)
NF D18-213-1996 卫生间管件.自动关闭阀PN 10 (Sanitary tapware. Automatic shut-off valves pn 10.)
NF D36-113-1-2001 使用商用丙烷,商用丁烷和蒸汽相混合物的橡胶和塑料管件和软管组件和配件.第1部分:橡胶,塑料管件和软管的要 (Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase - Part 1 : requirements for rubber and plastics tubing and ho)
NF E29-000-1996 管件.标准压力的定义和选择(欧洲标准EN 1333) (Pipework components. Definition and selection of pn.)
NF P41-220/A1-1999 DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范 (DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.)
NF P41-220/A2-2000 DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范 (DTU 60.2 - Building works - Cast iron for soil water, rain water and waste water drainage - Technical specifications.)
NF T54-016-4-1999 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:管件和附件 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.)
NF T54-090-1976 塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接头颜色 (PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.)
NF T54-095-1985 塑料.未增塑聚氯乙烯管件接头粘合溶剂.使用特性 (Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.)
NF T54-300-3-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.)
NF T54-934-1997 塑料管道系统.管件,阀和附件.气流率/压降关系的测定 (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)