NF A 49-902-1999 ...气体传输用可再填充的无缝钢管.

NF A 49-875-7-1996 钢管的无损试验.

NF A 49-875-6-2000 钢管的无损检验.

NF A 49-875-14-2000 钢管的无损检验.。

NF A 49-317-1980 钢管.机械用光端无缝钢管.奥式体不锈钢.

NF A 49-311-1974 钢管.机械用无缝钢管.（

NF A 49-310-1994 钢管.机械应用用精密无缝钢管.

NF A 49-230-1985 钢管.压力容器和低温管道用光端无缝钢管.

NF A 49-220-1990 钢管.高温用的无缝钢管.

NF A 49-219-1990 钢管.非合金和钼与铬钼合金炉用无缝钢管.

NF A 49-218-1979 钢管.奥氏体不锈钢熔炉用无缝钢管.

NF A 49-217-1981 热交换器用奥氏体和铁素体不锈钢无缝钢管。

NF A 49-215-1981 钢管.铁素体非合金和合金钢热交换器用的无缝钢管

NF A 49-214-1978 钢管.耐高温奥氏体无缝钢管.

NF A 49-212-1983 中温用碳素无缝钢管。尺寸（附标准公差）

NF A 49-210-1985 钢管.液体管道用冷拉无缝钢管.

NF A 49-200-4 A1-2004 压力载荷用无缝钢管.

NF A 49-200-3 A1-2004 压力载荷用无缝钢管.

NF A 49-200-2 A1-2004 压力载荷用无缝钢管.

NF A 49-200-1977 锅炉和压力容器用无缝钢管

NF A 49-200-1 A1-2004 压力载荷用无缝钢管.

NF A 49-186-1987 ...用异经管.一般用途,

NF A 49-117-1985 钢管.一般用和管道用光端无缝钢管.

NF A 49-115-1978 钢管.适合车螺纹用的热加工无缝钢管.

NF A 49-112-1987 钢管.热轧光端无缝钢管.

NF A 49-111-1978 钢管.一般商业用中压平端无缝钢管.

NF A 49-005-2003 焊接和无缝钢管.

MIL T 16286 E SHIPS-1977 船舶锅炉用无缝钢管

JIS G 7222-2003 承压用无缝钢管.

JIS G 7221-2003 承压用无缝钢管.

JIS G 7220-2003 承压用无缝钢管.

JIS G 7219-2003 承压用无缝钢管.

JIS G 7215-2003 机械用光端无缝钢管(ISO规范)

JIS G 3465-1988 钻探用无缝钢管

JIS G 3439-1988 油井用无缝钢管

JIS G 3429-1988 高压气体容器用无缝钢管 。。

ISO 9598-1989 受压力的无缝钢管.

ISO 9329-4-1997 受压力的无缝钢管.

ISO 9329-3-1997 受压力的无缝钢管.

ISO 9329-2-1997 受压力的无缝钢管.

ISO 9329-1-1989 受压力的无缝钢管.

ISO 9305-1989 受压力的无缝钢管.

ISO 6759-1980 热交换器用无缝钢管

ISO 3304-1985 光端精密无缝钢管.

ISO 2937-1974 机械用光端无缝钢管

ISO 12095-1994 压力无缝钢管和压力焊接钢管.

ISO 11120-1999 ...升水容量的可再填充的无缝钢管.

ISO 10124-1994 压力无缝钢管和压力焊接(埋弧焊除外)钢管

GOST 8734-1975 冷轧（拉）无缝钢管

GOST 8733-1974 冷轧（拨）和热轧（拨）无缝钢管

GOST 8731-1974 热轧无缝钢管

GOST 5654-1976 造船用热轧无缝钢管。

GOST 550-1975 石油加工和石油化学工业用的无缝钢管。

GOST 12132-1966 摩托车自行车工业用电焊和无缝钢管

GOST 11017-1980 高压无缝钢管。

GOST 10192-1962 双金属无缝钢管。

EN 10246-6-2000 钢管的无损试验.

EN 10246-4-2000 不完整性检测用铁磁无缝钢管

EN 10220-2002 无缝钢管.

EN 10216-5-2004 压力用途无缝钢管.

EN 10216-4-2004 压力载荷用无缝钢管.

EN 10216-3-2004 压力载荷用无缝钢管.

EN 10216-2-2004 压力载荷用无缝钢管.

EN 10216-1-2004 压力载荷用无缝钢管.

DIN EN 10246-6-2000 钢管的无损试验.

DIN EN 10246-4-2000 向不完整性检测用铁磁无缝钢管

DIN EN 10220-2003 无缝钢管.

DIN EN 10216-5-2004 压力用途无缝钢管.

DIN EN 10216-4-2004 压力载荷用无缝钢管.

DIN EN 10216-3-2004 压力载荷用无缝钢管.

DIN EN 10216-2-2004 压力载荷用无缝钢管.

DIN EN 10216-1-2004 压力载荷用无缝钢管.

DIN 2917-1982 热蒸汽管道和贮存器用无缝钢管

DIN 28180-1985 管束式热交换器的无缝钢管.

DIN 29657-1991 航空和航天.结构用无缝钢管和镍合金管.

DIN 2448-1981 无缝钢管.

DIN 2445-2-2000 动态载荷无缝钢管.

DIN 2445-1-2000 动态载荷无缝钢管.

DIN 2445 BB.1-2000 动态载荷无缝钢管.

DIN 2391-2-1994 特殊尺寸精度的精密无缝钢管.

DIN 2391-1-1994 特殊尺寸精度的精密无缝钢管.

DIN 17175-1979 耐热无缝钢管.

BS 4 T 100-1997 无缝钢管和管材的检验、试验和验收程序

BS KIT 109-2002 无缝钢管工具箱

BS EN ISO 13680-2002 ...油管和接箍的防腐合金无缝钢管.

BS EN ISO 11120-1999 ...升水容量的可再填充的无缝钢管.。

BS EN 10246-6-2000 钢管的无损检验.横向缺陷探测用无缝钢管

BS EN 10216-5-2004 压力无缝钢管.无缝钢管

BS EN 10216-4-2002 压力无缝钢管.规定低温特性的

BS EN 10216-3-2002 压力无缝钢管.合金细粒钢管

BS EN 10216-2-2002 压力无缝钢管..规定高温特性的

BS EN 10216-1-2002 压力无缝钢管.交货技术条件.规定室温

BS 6323-8-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 6323-7-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 6323-6-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 6323-5-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 6323-4-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 6323-3-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 6323-2-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 6323-1-1982 汽车制造、机械制造及一般工程用无缝钢管与焊

BS 3604-1-1990 ...铁合金钢.第1部分:无缝钢管和电阻焊接管规

BS 3600-1997 承压用焊接钢管和无缝钢管的尺寸及单位长度质

ASTM A 999 M-2004 合金钢及不锈钢管一般要求的标准规范

ASTM A 999 M-1998 合金钢及不锈钢管一般要求的标准规范

ASTM A 822-1990 液压系统设备用冷拉碳素无缝钢管

ASTM A 795 M-2004 用于防火的黑色和热浸镀锌焊接和无缝钢管

ASTM A 714-2003 高强度低合金焊接和无缝钢管的标准规范

ASTM A 714-1999 高强度低合金焊接和无缝钢管

ASTM A 53-1998 非镀锌和热浸镀锌焊接钢管和无缝钢管规范

ASTM A 53 M-1999 黑色和热浸镀锌焊接及无缝钢管规范

ASTM A 252-2002 焊接钢和无缝钢管桩的标准规范

ASTM A 252-1998 焊接钢和无缝钢管桩

AS 1835-1983 承压无缝钢管

GB/T8162-1999 结构用无缝钢管是用于一般结构和机械结构的无缝钢管。

GB/T8163-1999 流体输送用无缝钢管是用于输送水、油、气等流体的一般无缝钢管。

GB3087-1999 低中压锅炉用无缝钢管是用于制造各种结构低中压锅炉过热蒸汽管、沸水管及机车锅炉用过热蒸汽管、大烟管、小烟管和拱砖管用的优质碳素结构钢热轧和冷拔（轧）无缝钢管。

GB5310-1995 高压锅炉用无缝钢管是用于制造高压及其以上压力的水管锅炉受热面用的优质碳素钢、合金钢和不锈耐热钢无缝钢管。

GB6479-2000 化肥设备用高压无缝钢管是适用于工作温度为-40~400℃、工作压力为10~30Ma的化工设备和管道的优质碳素结构钢和合金钢无缝钢管

GB9948-88 石油裂化用无缝钢管是适用于石油精炼厂的炉管、热交换器和管道无缝钢管。

YB235-70 地质钻探用钢管是供地质部门进行岩心钻探使用的钢管，按用途可分为钻杆、钻铤、岩心管、套管和沉淀管等。

GB3423-82 金刚石岩芯钻探用无缝钢管是用于金刚石岩芯钻探的钻杆、岩心杆、套管的无缝钢管。

YB528-65 石油钻探管是用于石油钻探两端内加厚或外加厚的无缝钢管。钢管分车丝和不车丝两种，车丝管用接头联结，不车丝管用对焊的方法与工具接头联结。

GB5213-85 船舶用碳钢无缝钢管是制造船舶I级耐压管系、Ⅱ级耐压管系、锅炉及过热器用的碳素钢无缝钢管。碳素钢无缝钢管管壁工作温度不超过450℃，合金钢无缝钢管管壁工作温度超过450℃。

GB3088-82 汽车半轴套管用无缝钢管是制造汽车半轴套管及驱动桥桥壳轴管用的优质碳素结构钢和合金结构钢热轧无缝钢管。

GB3093-86 柴油机用高压油管是制造柴油机喷射系统高压管用的冷拔无缝钢管。

1GB8713-88 液压和气动缸筒用精密内径无缝钢管是制造液压和气动缸筒用的具有精密内径尺寸的冷拔或冷轧精密无缝钢管。

GB3639-83 冷拔或冷轧精密无缝钢管是用于机械结构、液压设备的尺寸精度高和表面光洁度好的冷拔或冷轧精密无缝钢管。选用精密无缝钢管制造机械结构或液压设备等，可以大大节约机械加工工时，提高材料利用率，同时有利于提高产品质量。

GB/T14975-1994 结构用不锈钢无缝钢管是广泛用于化工、石油、轻纺、医疗、食品、机械等工业的耐腐蚀管道和结构件及零件的不锈钢制成的热轧（挤、扩）和冷拔（轧）无缝钢管。

GB/T14976-1994 流体输送用不锈钢无缝钢管是用于输送流体的不锈钢制成的热轧（挤、扩）和冷拔（轧）无缝钢管。

无缝钢管标准(Seamless steel tube standards)

ANSI/ASTM A210-1996 锅炉和过热器用中碳素无缝钢管规范 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ASTM A 252-1998 焊接钢和无缝钢管桩的标准规范 Standard Specification for Welded and Seamless Steel Pipe Piles
ASTM A 53/A 53M-2007 黑色和热浸镀锌焊接及无缝钢管的标准规范 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A 714-1999 高强度低合金焊接和无缝钢管的标准规范 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
ASTM A 795/A 795M-2007 消防用黑色和热浸镀锌焊接钢管及无缝钢管用标准规范 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
ASTM B 861a-2006 钛和钛合金无缝钢管的标准规范 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
BS 4T 100-1997 无缝钢管和管材的检验、试验和验收程序 Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
BS EN 10216-1-2002 承压用的无缝钢管.交付技术状态.规定了室温特性的非合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions
BS EN 10216-2-2002 承压用的无缝钢管.交付技术状态.规定了高温特性的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10216-3-2002 承压用的无缝钢管.交付技术状态.合金细晶粒钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
BS EN 10216-4-2002 承压用的无缝钢管.交付技术状态.规定了低温特性的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions
BS EN 10216-5-2004 压力无缝钢管.交货技术条件.无缝钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes
BS EN 10246-6-2000 钢管的无损检验.横向缺陷探测用无缝钢管的自动全周界超声波检验 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
BS EN ISO 11120-1999 气瓶.1501升-30001升水容量的可再填充的无缝钢管.设计,结构和试验 Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l - Design, construction and testing
BS EN ISO 13680-2002 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
DD ENV 10220-1994 无缝钢管和焊接钢管.尺寸及单位长度质量 Seamless and welded steel tubes. Dimensions and masses per unit length
DIN 2445 Bb.1-2000 承受动态载荷的无缝钢管.设计规则 Seamless steel tubes for dynamic loads - Design rules
DIN 2445-1-2000 承受动态载荷的无缝钢管.第1部分:流体系统用压力为100至500巴的热轧管 Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar
DIN 2445-2-2000 承受动态载荷的无缝钢管.第2部分:流体系统用压力为100至500巴的精密钢管 Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar
DIN 28180-2007 管式热交换器用无缝钢管.尺寸和材料 Seamless steel tubes for tubular heat exchangers - Dimensions and materials
DIN EN 10216-1-2004 压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004
DIN EN 10216-2-2007 压力用无缝钢管.交货技术条件.第2部分:带特定高温性能的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007
DIN EN 10216-3-2004 压力载荷用无缝钢管.交货技术条件.第3部分:合金细粒钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004
DIN EN 10216-4-2004 压力载荷用无缝钢管.交货技术条件.第4部分:带特定低温性能的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004
DIN EN 10216-5-2004 压力用途无缝钢管.交货技术条件.第5部分:不锈钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004
DIN EN 10246-4-2000 钢管的无损检验.第4部分:铁磁无缝钢管横向缺陷检测用自动全外周磁换能器检验/磁漏检验 Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999
DIN EN 10246-6-2000 钢管的无损检验.第6部分:无缝钢管横向缺陷探测的自动全周长超声波试验 Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999
DIN EN 10297-2-2006 机械和一般工程用无缝钢管.交货技术条件.第2部分:不锈钢.德文版本EN 10297-2-2005 Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10297-2:2005
EN 10216-1-2002 压力用途的无缝钢管　交货技术条件　第1部分：有规定室温特性的非合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-1/prA1 (2003-07).
EN 10216-2-2002 压力用途的无缝钢管　交货技术条件　第2部分：有规定高温特性的非合金及合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (2003-07).
EN 10216-3-2002 压力用途的无缝钢管　交货技术条件　第3部分：合金细晶粒钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Note: To be amended by EN 10216-3/prA1 (2003-07).
EN 10216-4-2002 压力用途的无缝钢管　交货技术条件　第4部分：有规定低温特性的非合金及合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (2003-07).
EN 10246-6-1999 钢管的无损检测　第6部分：横向缺陷探测用无缝钢管的自动全周界超声检验 Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
EN 10305-1-2002 高精密度用途的钢管　交货技术条件　第1部分：冷拔无缝钢管 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
EN 10305-4-2003 高精密度用途的钢管　交货技术条件　第4部分：液压和气动系统用冷拔无缝钢管 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN ISO 13680-2001 石油和天然气工业　用作套管、油管和接箍的防腐合金无缝钢管交货技术条件 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000)
FZ/T 92046-1995 平焊管法兰(无缝钢管用) ()
GB 13296-2007 锅炉、热交换器用不锈钢无缝钢管 Seamless stainless steel tubes for boiler and heat exchanger
GB 18248-2000 气瓶用无缝钢管 Seamless steel tubes for gas cylinder
GB 3087-1999 低中压锅炉用无缝钢管 Seamless steel tubes for lowand medium pressure
GB 5310-1995 高压锅炉用无缝钢管 Seamless steel tubes and pipes for high pressure boiler
GB 6479-2000 高压化肥设备用无缝钢管 Seamless steel tubes for high-pressure for chemical fertilizer equipments
GB 9948-2006 石油裂化用无缝钢管 Seamless steel tubes for petroleum cracking
GB/T 12459-2005 钢制对焊无缝管件 Steel butt-welding seamless pipe fittings
GB/T 14975-2002 结构用不锈钢无缝钢管 Stainless steel seamless tubes for structures
GB/T 14976-2002 流体输送用不锈钢无缝钢管 Stainless steel seamless tubes for fluid transport
GB/T 17395-1998 无缝钢管尺寸、外形、重量及允许偏差 Dimensions，shapes，masses and tolerances of seamless steel tubes
GB/T 17396-1998 液压支柱用热轧无缝钢管 Seamless hot-rolled steel tubes for hydraulic pillar service
GB/T 18984-2003 低温管道用无缝钢管 Seamless steel tubes for low-temperature-servicepiping
GB/T 20409-2006 高压锅炉用内螺纹无缝钢管 Multi-rifled seamless steel tubes for high-pressure boiler
GB/T 3089-1982 不锈耐酸钢极薄壁无缝钢管 Thinnest-wall seamless tubes of stainless and acid-resistance steel
GB/T 3090-2000 不锈钢小直径无缝钢管 Stainless steel small diameter seamless steel tubes
GB/T 3093-2002 柴油机用高压无缝钢管 High-pressure seamless steel tubes for diesel engine
GB/T 3639-2000 冷拔或冷轧精密无缝钢管 Cold-drawn or cold-rolled precision seamless steel tubes
GB/T 5312-1999 船舶用碳钢和碳锰钢无缝钢管 Carbon and carbon-manganese steel seamlesssteel tubes and pipes for ship
GB/T 5777-1996 无缝钢管超声波探伤检验方法 Seamless steel pipe and tubing--Methods forultrasonic testing
GB/T 8162-1999 结构用无缝钢管 Seamless steel tubes for structural purposes
GB/T 8163-1999 输送流体用无缝钢管 Seamless steel tubes for liquid service
GB/T 8183-2007 铌及铌合金无缝管 Niobium and niobium alloy seamless tubes
GB/T 8890-2007 热交换器用铜合金无缝管 Seamless copper alloy tube for heat-exchanger
ISO 10124-1994 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 层状缺陷检测用超声检验 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
ISO 10332-1994 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 验证液压防泄漏用超声波检验 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness
ISO 11120-1999 气瓶 150升～3000升水容量的可重复充装无缝钢管气瓶 设计、结构和试验 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
ISO 13680 Technical Corrigendum 2-2004 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件.技术勘误2 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
ISO 13680-2000 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
ISO 2937-1974 机械用光端无缝钢管 Plain end seamless steel tubes for mechanical application
ISO 3304-1985 光端精密无缝钢管 交货技术条件 Plain end seamless precision steel tubes; Technical conditions for delivery
ISO 4200-1991 光端焊接和无缝钢管 管的尺寸和单位长度重量的一览表 Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length
ISO 6207-1992 镍和镍合金无缝管 Seamless nickel and nickel alloy tube
ISO 6759-1980 热交换器用无缝钢管 Seamless steel tubes for heat exchangers
ISO 9302-1994 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 液压密封验证电磁试验法 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
ISO 9303-1989 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用全周边超声波试验 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections
ISO 9304-1989 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测缺陷用涡流电流试验 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections
ISO 9305-1989 压力用途的无缝钢管 横向缺陷全周边超声电流检验 Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections
ISO 9329-1-1989 压力用途的无缝钢管 交货技术条件 第1部分:规定室温性能的非合金钢 Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties
ISO 9329-2-1997 压力用途的无缝钢管 交货技术条件 第2部分:规定高温性能的非合金钢和合金钢 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
ISO 9329-3-1997 压力用途的无缝钢管 交货技术条件 第3部分:规定低温性能的非合金钢和合金钢 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties
ISO 9329-4-1997 压力用途的无缝钢管 交货技术条件 第4部分:奥氏体不锈钢 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
ISO 9402-1989 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用铁磁钢管全周边磁转换/磁链试验 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
ISO 9598-1989 压力用途的无缝钢管 检测横向缺陷用铁磁钢管全周边磁转换/磁链试验 Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
JB/T 8120.1-2000 压燃式发动机 高压油管用钢管第1部分:单壁冷拉无缝钢管 技术条件 ()
JIS G3429-2006 高压气瓶用无缝钢管
高圧ガス容器用継目無鋼管 Seamless steel tubes for high pressure gas cylinder
JIS G3465-2006 钻井用无缝钢管
試すい用継目無鋼管 Seamless steel tubes for drilling
JIS G4903-1991 镍铬铁合金无缝管
配管用継目無ニッケルクロム鉄合金管 Seamless nickel-chromium-iron alloy pipes
JIS G4904-1991 热交换器用镍铬铁合金无缝管
熱交換器用継目無ニッケルクロム鉄合金管 Seamless nickel-chromium-iron alloy heat exchanger tubes
JIS G7215-2003 机械用光端无缝钢管(ISO规范)
機械構造用プレーンエンド継目無鋼管（ＩＳＯ仕様） Plain end seamless steel tubes for mechanical application (ISO specifications)
JIS G7219-2003 承压用无缝钢管.交货技术条件.第1部分:规定室温特性的非合金钢(ISO规范)
圧力用継目無鋼管　―　技術的受渡条件　―　第１部：室温用炭素鋼管（ＩＳＯ仕様） Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties (ISO specifications)
JIS G7220-2003 承压用无缝钢管.交货技术条件.第2部分:规定高温特性的非合金钢及合金钢(ISO规范)
圧力用継目無鋼管　―　技術的受渡条件　―　第２部：高温用炭素鋼管及び合金鋼管（ＩＳＯ仕様） Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties (ISO specifications)
JIS G7221-2003 承压用无缝钢管.交货技术条件.第3部分:规定低温特性的非合金钢及合金钢(ISO规范)
圧力用継目無鋼管　―　技術的受渡条件　―　第３部：低温用炭素鋼管及び合金鋼管（ＩＳＯ仕様） Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties (ISO specifications)
JIS G7222-2003 承压用无缝钢管.交货技术条件.第4部分:奥氏体不锈钢(ISO规范)
圧力用継目無鋼管　―　技術的受渡条件　―　第４部：オーステナイトステンレス鋼管（ＩＳＯ仕様） Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels (ISO specifications)
JIS H3300-2006 铜和铜合金无缝钢管
銅及び銅合金の継目無管 Copper and copper alloy seamless pipes and tubes
JIS H3510-2006 电子设备用无氧铜薄片、板材、带材、无缝钢管、杆材、棒材和线材
電子管用無酸素銅の板，条，継目無管，棒及び線 Oxygen free copper sheets, plates, strips, seamless pipes and tubes, rods, bars and wires for electron devices
JIS H4202-2005 镁合金无缝管
マグネシウム合金継目無管 Magnesium alloy seamless pipes and tubes
JIS H4552-2000 镍及镍合金无缝管
ニッケル及びニッケル合金継目無管 Nickel and nickel alloy seamless pipes and tubes
NF A49-005-2003 焊接和无缝钢管.管的尺寸和单位长度重量的一览表 (Seamless and welded steel tubes - General tables of dimensions and masses per unit length.)
NF A49-117-1985 钢管.管道和其他用途光端无缝钢管.铁素体和奥氏体不锈钢.尺寸.交货技术条件 (Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.)
NF A49-214-1978 钢管.耐高温奥氏体无缝钢管.（带标准公差的尺寸.交货技术条件） (STEEL TUBES.SEAMLESS AUSTENITIC STEEL TUBES FOR USE AT HIGH TEMPERATURES.DIMENSIONS (WITH NORMAL TOLERANCES).TECHNICAL CONDITIONS OF DELIVERY.)
NF A49-218-1979 钢管.奥氏体不锈钢熔炉用无缝钢管.（带标准公差或缩减公差的尺寸.交货技术条件.） (STEEL PIPES. SEAMLESS PIPES FOR FURNACES. AUSTENITIC STAINLESS STEELS. DIMENSIONS (WITH NORMAL OR REDUCED TOLERANCES). TECHNICAL DELIVERY CONDITIONS.)
NF A49-220-1990 钢管.高温用的无缝钢管.尺寸.交贷的技术条件 (STEEL TUBES. GROOVED SEAMLESS STEEL TUBES FOR USE AT HIGH TEMPERATURE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A49-317-1980 钢管.机械用光端无缝钢管.奥式体不锈钢.（尺寸.交货技术条件.） (STEEL TUBES. SEAMLESS PLAIN END TUBES FOR ENGINEERING USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A49-875-14-2000 钢管的无损检验.第14部分:层面缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动超声试验 (Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections.)
NF A49-875-6-2000 钢管的无损检验.第6部分:检测横向缺陷用无缝钢管的自动全周边超声试验 (Non-destructive testing of steel tubes - Part 6 : Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections.)
NF A49-875-7-1996 钢管的无损试验.第7部分:纵向缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动全周边超声波试验 (Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.)
YB/T 2008-2007 不锈钢无缝钢管圆管坯 ()
YB/T 4054-2006 无缝钢管常用穿孔顶头技术条件 ()
YB/T 4124.1-2004 热轧无缝钢管轧辊技术条件 张力减径机轧辊和定径机轧辊 ()
YB/T 4124.2-2004 热轧无缝钢管轧辊技术条件 连轧机轧辊 ()
YB/T 4146-2006 高碳铬轴承钢无缝钢管 ()
YB/T 4173-2008 高温用锻造镗孔厚壁无缝钢管 Forged and bored seamless steel pipes with heavy wall for high-temperature service
YB/T 5035-1996(2006年确认) 汽车半轴套管用无缝钢管 ()
YB/T 5137-2007 高压用热轧和锻制无缝钢管圆管坯 ()
prEN 10216-5-1998 压力用途的无缝钢管　交货技术条件　第5部分：不锈钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
prEN 2202-1998 航空航天系列 经溶液处理和淀积处理的耐热合金 NI-PH1303 (NiCo20Cr20Mo5Ti2Al) 无缝钢管 D Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) solution treated - Seamless tube - D 50 mm, a 3 mm