国内外碳素钢标准 carbon steel standards

国内外碳素钢标准 carbon steel standards
美国碳素钢标准(ANSI carbon steel standards)
ANSI/ASTM A194/A 194M-2001 高压和高温设备用碳素钢与合金钢螺栓和螺母规范 Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service
ANSI/ASTM A210-1996 锅炉和过热器用中碳素无缝钢管规范 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ANSI/ASTM A321-1996 淬火和回火碳素钢棒规范 Specification for Steel Bars, Carbon, Quenched and Tempered
ANSI/ASTM A450-1996 碳素钢管、铁素体合金钢管及奥氏体合金钢管规范 Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ANSI/ASTM A500-2001 圆钢与型钢的冷变形焊接与无缝碳素钢结构管规范 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ANSI/ASTM A556-1996 无缝冷拉碳素钢给水加热器管规范 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
ANSI/ASTM A668-1996 工业用普通碳素钢和合金钢锻件规范 Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ANSI/ASTM A709/A 709M-2001 桥梁用碳素钢和高强度低合金结构型钢、钢板、钢棒及调质合金结构钢棒规范 Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
ANSI/ASTM F682a-1982 锻制碳素钢套管接头规范 Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ANSI/AWWA D100-2005 储水用碳素钢焊接箱 Welded Carbon Steel Tanks for Water Storage
ANSI/SAE J1268-1993 碳素钢和合金工字钢的可淬透性带 Hardenability Bands for Carbon and Alloy H Steels
ANSI/SAE J316-1994 油回火碳素钢弹簧钢丝和弹簧 Oil Tempered Carbon Steel Spring Wire and Springs
ANSI/SAE J351-1994 油回火碳素钢阀、弹簧钢丝和弹簧 Oil Tempered Carbon Steel Valve, Spring Quality Wire, and Springs
ANSI/SAE J403-1994 SAE碳素钢的化学成分 Chemical Compositions of SAE Carbon Steels
ASTM A 1-2000 碳素钢丁字轨的标准规范 Standard Specification for Carbon Steel Tee Rails
ASTM A 1007-2002 钢丝绳用碳素钢丝标准规范 Standard Specification for Carbon Steel Wire for Wire Rope
ASTM A 1020/A 1020M-2002 锅炉、加热器、热交换器和冷凝器装置的熔焊碳素和碳锰钢管的标准规范 Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
ASTM A 1023/A 1023M-2002 通用碳素钢制股绞绳标准规范 Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
ASTM A 105/A 105M-2005 管道设备用碳素钢锻件的标准规范 Standard Specification for Carbon Steel Forgings for Piping Applications
ASTM A 108-2003 冷加工碳素钢和合金钢棒材的标准规范 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A 178/A 178M-2002 电阻焊接碳素钢和碳锰钢锅炉和过热器管的标准规范 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
ASTM A 183-2003 碳素钢制轨条螺栓和螺母的标准规范 Standard Specification for Carbon Steel Track Bolts and Nuts
ASTM A 2-2002 平型、带槽和防护型碳素钢平底轨道的标准规范 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
ASTM A 214/A 214M-1996 热交换器与冷凝器用电阻焊接碳素钢管的标准规范 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A 216/A 216M-2004 高温设备用适合于熔焊的碳素钢铸件的标准规范 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
ASTM A 230/A 230M-2005 阀簧级油回火碳素钢丝的标准规范 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
ASTM A 266/A 266Ma-2003 压力容器部件用碳素钢锻件标准规范 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
ASTM A 27/A 27M-2005 通用碳素钢铸件的标准规范 Standard Specification for Steel Castings, Carbon, for General Application
ASTM A 283/A 283M-2003 低和中等抗拉强度碳素钢板标准规范 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM A 285/A 285M-2003 压力容器用低和中等抗拉强度的碳素钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
ASTM A 288-1991 涡轮发电机磁性定位环用碳素钢和合金钢锻件 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A 29/A 29M-2005 热锻碳素钢棒和合金钢棒一般要求的标准规范 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
ASTM A 290/A 290M-2005 减速齿轮用碳素钢及合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
ASTM A 291/A 291M-2005 小齿轮、齿轮和减速齿轮轴用碳素钢和合金钢锻件的标准规范 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
ASTM A 3-2001 低、中、高碳素钢(未经热处理的)连接杆标准规范 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
ASTM A 307-2004 抗拉强度为60000PSI的碳素钢螺栓和螺柱的标准规范 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A 311/A 311M-2004 有机械性能要求的应力消除冷拉制碳素钢棒的标准规范 Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
ASTM A 321-1990 经淬火和回火的碳素钢棒 Steel Bars, Carbon, Quenched and Tempered
ASTM A 334/A 334Ma-2004 低温设备用无缝和焊接碳素和合金钢管的标准规范 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
ASTM A 350/A 350Ma-2004 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A 350/A 350Mc-2000 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A 356/A 356M-2005 汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件的标准规范 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
ASTM A 411-2003 镀锌低碳素钢铠装线的标准规范 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
ASTM A 413/A 413M-2001 碳素钢链标准规范 Standard Specification for Carbon Steel Chain
ASTM A 414/A 414M-2006 压力容器用碳素钢薄板材的标准规范 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
ASTM A 420/A 420M-2006 低温设备用锻制碳素钢和合金钢管道配件的标准规范 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A 450/A 450Ma-2004 碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ASTM A 470/A 470M-2005 涡轮转子和轴用经真空处理的碳素钢和合金钢锻件的标准规范 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM A 489-2004 碳素钢吊耳标准规范 Standard Specification for Carbon Steel Lifting Eyes
ASTM A 49-2001 热处理碳素钢连接棒材、微合金连接棒材和法兰连接棒材的标准规范 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
ASTM A 498-2004 带整体散热片的无缝和焊接碳素钢热交换器管的标准规范 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
ASTM A 499-1989 丁字钢轨轧制碳素钢条及型材的标准规范 Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
ASTM A 500a-2003 圆形与异型冷成型焊接与无缝碳素钢结构管标准规范 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM A 501-2001 热成型焊接与无缝碳素钢结构管标准规范 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
ASTM A 508/A 508Mb-2005 压力容器用经淬火和回火真空处理的碳素钢与合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
ASTM A 512-1996 冷拉对缝焊碳素钢机械管的标准规范 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
ASTM A 515/A 515M-2003 中温及高温压力容器用碳素钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM A 516/A 516M-2006 中温及低温压力容器用碳素钢板材的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A 519-2003 无缝碳素钢与合金钢机械管用标准规范 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A 520-1997 符合ISO 锅炉结构推荐标准规定的高温用无缝和电阻焊碳素钢管形产品的补充要求 Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction
ASTM A 524-1996 常温和低温用无缝碳素钢管的标准规范 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
ASTM A 530/A 530Ma-2004 专用碳素钢和合金钢管一般要求的标准规范 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A 541/A 541M-2005 压力容器部件用经淬火和回火的碳素钢及合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
ASTM A 556/A 556M-1996 无缝冷拉碳素钢给水加热器管的标准规范 Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
ASTM A 562/A 562M-2006 玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A 563a-2004 碳素钢与合金钢螺母标准规范 Standard Specification for Carbon and Alloy Steel Nuts
ASTM A 573/A 573M-2005 增强韧性的结构碳素钢板的标准规范 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
ASTM A 575-1996 商品级碳素钢棒(M级)的标准规范 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
ASTM A 576-1990 特级热轧碳素钢棒 Steel Bars, Carbon, Hot-Wrought, Special Quality
ASTM A 576b-1990 特级热锻碳素钢棒标准规范 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
ASTM A 609/A 609M-1991 碳素钢,低合金钢和马氏体不锈钢铸件及其超声波检验 Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof
ASTM A 612/A 612M-2003 中温和低温压力容器用高强度碳素钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
ASTM A 641/A 641M-2003 镀锌碳素钢丝的标准规范 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
ASTM A 659/A 659M-1997 商业级热轧碳素钢薄板和带材(最大含碳量为0.16%-0.25%)的标准规范 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
ASTM A 660-1996 高温用离心铸造碳素钢管的标准规范 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM A 663/A 663M-1989 商品级碳素钢棒的机械特性 tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
ASTM A 668/A 668M-2004 一般工业用碳素钢和合金钢锻件的标准规范 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ASTM A 675/A 675M-2003 高质量热锻碳素钢棒的机械特性标准规范 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A 678/A 678M-2005 淬火和回火的碳素钢和高强度低合金结构钢板的标准规范 Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
ASTM A 686-1992 碳素工具钢的标准规范 Standard Specification for Tool Steel, Carbon
ASTM A 689-1997 弹簧用碳素钢及合金钢棒的标准规范 Standard Specification for Carbon and Alloy Steel Bars for Springs
ASTM A 691-1998 高温下高压装置用电熔焊碳素钢和合金钢管的标准规范 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM A 694/A 694M-2003 高压传输设备用管法兰、配件、阀门及零件用碳素钢及合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM A 695-1990 流体动力设备专用热轧碳素钢棒 Steel Bars, Carbon, Hot-Wrought, Special Quality for Fluid Power Applications
ASTM A 696a-1990 压力管道部件用特级热锻或冷精轧碳素钢棒标准规范 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
ASTM A 707/A 707M-2002 低温设备用锻制碳素钢和合金钢法兰的标准规范 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
ASTM A 727/A 727M-2002 具有固定切口韧性的管道部件用碳素钢锻件标准规范 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
ASTM A 749/A 749M-1997 热轧高强度碳素低合金钢带材的标准规范 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM A 758/A 758M-2000 具有改进的切口韧性的对缝焊锻制碳素钢管配件标准规范 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
ASTM A 764-1995 机械弹簧用冷拉镀锌和按成品尺寸镀锌的碳素钢丝的标准规范 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A 765/A 765M-2004 具有强制性韧性要求的碳素钢及低合金钢压力容器部件锻件的标准规范 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
ASTM A 786/A 786M-2005 热轧制碳素钢、低合金钢、高强度低合金钢及合金钢楼板的标准规范 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A 787-2005 金属涂覆电阻焊接碳素钢机械管道的标准规范 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM A 794-1997 商品级冷轧碳素钢薄板(最高含碳量为0.16%-0.25%)的标准规范 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
ASTM A 805-1993 冷轧碳素钢扁平线的标准规范 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
ASTM A 809-2003 铝涂覆(涂铝的)碳素钢丝的标准规范 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
ASTM A 822/A 822M-2004 液压系统设备用无缝冷拔碳素钢管的标准规范 Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
ASTM A 827/A 827M-2002 锻造及类似用途的碳素钢板的标准规范 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
ASTM A 836/A 836M-2002 玻璃衬里的管道系统和压力容器设备用钛稳定的碳素钢锻件标准规范 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
ASTM A 853-2004 一般用途的碳素钢丝的标准规范 Standard Specification for Steel Wire, Carbon, for General Use
ASTM A 856/A 856M-2003 锌-5%铝-铈合金涂覆碳素钢丝的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM A 858/A 858M-2006 低温和腐蚀情况下热处理碳素钢配件的标准规范 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
ASTM A 915/A 915M-1993 化学要求同锻件类似的碳素钢和合金钢的标准规范 Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
ASTM A 980-1997 超高强度冷轧制碳素钢薄板标准规范 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
ASTM C 1179-1991 室外加工碳素材料及石墨材料氧化质量损失标准试验方法 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM E 212-1966 用杆对杆技术对碳素钢及低合金钢做光谱分析的方法 Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-to-Rod Technique
ASTM E 350-1995 碳素钢、低合金钢、硅电工钢、铁铸锭和熟铁化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
ASTM E 404-1995 用点对面技术测定碳素钢和低合金钢中硼含量的光谱测定的测试方法 Standard Test Method for Spectrographic Determination of Boron In Carbon and Low Alloy Steel by the Point-To-Plane Technique
ASTM F 568M-2004 碳素和合金钢外螺纹米制紧固件标准规范 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
ASTM F 682a-1982 锻制碳素钢套筒型管联接器标准规范 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

英国碳素钢标准(BS carbon steel standards)
ANSI　|　 BS　|　 DIN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
--------------------------------------------------------------------------------
编号 中文名称 英文名称
BS 2S 112-1964 飞机材料规范.易切削碳素钢、光亮冷拔棒(40-50吨力/平方英寸;最大直径或最小断面尺寸1/2英寸)(主要用于制造 Specification for aircraft material - Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size 1/2 inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts)
BS 2S 113-1964 飞机材料规范.机械制造用40号碳素钢光亮冷拔棒(45-55吨力/平方英寸;限定等圆断面1英寸)(主要用于制造螺母) Specification for aircraft material - '40' carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts)
BS 2S 116-1964 飞机材料规范.机械制造用40号碳素钢光亮冷棒(55-65吨力/平方英寸;限定等圆断面1/4英寸)(主要用于制造螺栓) Specification for aircraft material - '40' carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section 3/4 inch) (primarily intended for the manufacture of machined bolts)
BS 2SP 91-92-1973 飞行器用碳素钢蜗杆传动夹紧装置规范 Specification for carbon steel worm drive clamps for aircraft
BS 2W 12-1989 预制镀锌碳素钢丝绳规范(公制和英制系列) Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
BS 3146-1-1974 金属熔模铸造规范.第1部分:碳素钢与低合金钢 Specification for investment castings in metal - Carbon and low alloy steels
BS 3293-1960 石油工业用碳素钢管法兰(标称尺寸24英寸以上)规范 Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
BS 3673-2-1965 弹簧固定环规范.第2部分:碳素钢E 型卡箍 Specification for spring retaining rings - Carbon steel E clips
BS 3673-3-1968 弹簧固定环规范.第3部分:碳素钢 C型卡箍 Specification for spring retaining rings - Carbon steel C clips
BS 3673-4-1977 弹簧固定环规范.第4部分:米制系列碳素钢开口簧环 Specification for spring retaining rings - Carbon steel circlips - metric series
BS 3S 105-1969 碳素钢(仅供锻造螺栓用的棒材)规范 Specification for carbon steel (bar for the manufacture of forged bolts only)
BS 405-1987 通用未涂覆的板网碳素钢薄板规范 Specification for uncoated expanded metal carbon steel sheets for general purposes
BS 4637-1970 盘簧(衬垫和底座)用碳素钢丝规范 Specification for carbon steel wire for coiled springs (bedding and seating)
BS 4638-1970 Z形和方形弹簧用碳素钢丝规范 Specification for carbon steel wire for zigzag and square-form springs
BS 6043-1.1-2002 制铝工业用碳素材料的取样与试验方法.电极用沥青.取样 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Sampling - Section 1.1: Sampling
BS 6043-1.10-2000 制铝工业用碳素材料的取样与试验方法.电极用沥青.挥发物含量的测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of volatile matter content - Section 1.10 Determination of volatile matter content
BS 6043-1.11-2000 制铝工业用碳素材料的取样与试验方法.电极用沥青.喹啉不溶物中C/H原子比的测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of the atomic C/H ratio of the quinoline-insoluble material - Section 1.11 Determination of the atomic C/H ratio of the quinoline-insoluble material
BS 6043-1.13-2000 制铝工业用碳素材料的取样与试验方法.电极用沥青.硫含量的测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of sulfur content - Section 1.13 Determination of sulfur content
BS 6043-1.6-1998 制铝工业用碳素材料的取样与试验方法.电极用沥青.焦化值测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of coking value - Section 1.6 Determination of coking value
BS 6043-2-18-2001 制铝工业用碳素材料的取样与试验方法.电极用焦炭.用艾氏卡(Eschlca)法测定总硫量 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the total sulfur by the Eschka method - Section 2.18 Determination of total sulfur by the Eschka method
BS 6043-2.20.1-2001 制铝工业用碳素材料的取样与试验方法.电极用焦炭.煅烧焦炭的羧基反应性.通过质量损失法测定反应性 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Carboxy reactivity of calcined coke - Determination of the reactivity by a loss in mass method - Section 2.20: Carboxy reactivity of calcined coke Subsection 2.20.1: Determination of the reactivity by a loss in mass method
BS 6043-2.21.1-2001 铝生产用碳素材料的取样和试验方法.电极用焦炭.煅烧焦炭的空气反应性.通过灼烧温度测定反应性 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Air reactivity of calcined coke - Determination of the reactivity by determination of ignition temperature - Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by determination of ignition temperature
BS 6043-2.4-2000 制铝工业用碳素材料的取样与试验方法.电极用焦炭.X射线荧光光谱法分析 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Analysis by X-ray fluorescence spectroscopy - Section 2.4: Analysis by X-ray fluorescence spectroscopy
BS 6043-2.9-2000 制铝工业用碳素材料的取样与试验方法.电极用焦炭.粒度分布的测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution - Section 2.9 Determination of particle size distribution
BS 6043-3.1.1-1999 制铝工业用碳素材料的取样与试验方法.电极.取样.阴极取样 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of cathodes - Section 3.1 Sampling Subsection 3.1.1 Sampling of cathodes
BS 6043-3.1.2-1999 制铝工业用碳素材料的取样与试验方法.电极.取样.阳极取样 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of anodes - Section 3.1 Sampling Subsection 3.1.2 Sampling of anodes
BS 6043-3.3-2000 制铝工业用碳素材料的取样与试验方法.电极.用尺寸法测定阴极碳块和预焙阳极的体密度(表观密度) Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method - Section 3.3 Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
BS 6043-3.4-2000 制铝工业用碳素材料的取样与试验方法.电极.用静流法测定阴极碳块和预焙阳极的开口孔隙率和体密度(表观密度) Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes using a hydrostatic method - Section 3.4 Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
BS 6043-3.5.1-2000 制铝工业用碳素材料的取样与试验方法.电极.抗弯强度的测定.三点法 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method - Section 3.5 Determination of flexural strength Subsection 3.5.1 Three point method
BS 6043-3.6-2000 制铝工业用碳素材料的取样与试验方法.电极.室温下阴极碳块和预焙阳极电阻率的测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature - Section 3.6 Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
BS 6043-3.8.1-2001 制铝工业用碳素材料的取样与试验方法.电极用焦炭.预焙阳极的羧基反应性.通过质量损失法测定反应性 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Carboxy reactivity of prebaked anodes - Determination of the reactivity by a loss in mass method - Sec 3.8 Carboxy reactivity of prebaked anodes Subsec 3.8.1 Determination of the reactivity buy a loss in mass method
BS 6043-4.1-2000 制铝工业用碳素材料的取样和试验方法.冷压糊料.取样方法 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Methods of sampling - Section 4.1 Methods of sampling
BS 6043-4.10-1991 制铝工业用碳素材料的取样和试验方法.第4部分:冷捣糊块.第10节:热捣糊块表观孔隙率测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the apparent porosity of baked rammed paste
BS 6043-4.11-1991 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第11节:烘焙捣糊块热膨胀性测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the thermal expansion of baked rammed paste
BS 6043-4.13-1991 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第13节:烘焙捣实糊块灰分测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of ash of baked rammed paste
BS 6043-4.2-2000 制铝工业用碳素材料的取样和试验方法.冷压糊料.通过喹啉萃取测定有效粘合剂含量和聚焦体含量.聚焦体尺寸分 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution - Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution
BS 6043-4.4-2000 制铝工业用碳素材料的取样和试验方法.冷压糊料.未烘烧糊料的挥发物含量的测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the volatile matter content of unbaked paste - Section 4.4 Determination of the volatile matter content of unbaked paste
BS 6043-4.5-1991 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第5节:未烘焙糊块含水量测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of water content of unbaked pastes
BS 6043-4.6-1991 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第6节:未烘焙糊块最大表观捣实密度测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of maximum rammed apparent density of unbaked paste
BS 6043-4.8-1991 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第8节:烘焙捣实糊块电阻率测定 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of electrical resistivity of baked rammed paste
BS 7S 1-1964 飞机材料规范.机械加工用碳素钢光亮冷拔棒材(35/45吨力/平方英寸.最大直径或最小断面尺寸4英寸) Specification for aircraft material - Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension)
BS EN 2557-1997 碳素纤维预浸织物.单位面积质量测定 Carbon fibre preimpregnates - Determination of mass per unit area
BS EN 2559-1997 碳素纤维预浸织物.树脂成份,纤维成份以及单位面积纤维质量测定 Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
BS EN 2561-1995 碳素纤维增强的塑料.无向的塑料层压制品.平行与纤维方向的抗拉试验 Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction
BS EN 2562-1997 碳素纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
BS EN ISO 2566-1-1999 钢.伸长值的换算.碳素钢和低合金钢 Steel - Conversion of elongation values - Carbon and low alloy steels
BS HC 1-1973 碳素钢铸件(500牛顿/平方毫米)规范 Specification for carbon steel castings (500 N/mm2)
BS ISO 12986-2-2005 铝生产用碳素材料.预焙阳极和阴极碳块.用四点法测定抗弯强度 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method
BS ISO 12989-2-2005 铝生产用碳素材料.焙烧阳极和侧壁块.空气反应性的测定.热重分析法 Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Thermogravimetric method
BS ISO 3575-2005 商品级和冲压级连续热镀锌碳素钢薄板 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
BS ISO 4999-2006 商品级和冲压和结构级连续热镀锡(合金)冷轧碳素薄钢板 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
BS ISO 8005-2006 铝生产用碳素材料.生焦炭和煅烧焦炭.灰分含量的测定 Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
BS ISO 8007-3-2005 铝生产用碳素材料.单个材料的取样方案和取样.侧壁块 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks
BS SP 166-1982 航空航天用弹簧限动环规范.碳素钢开口簧环(米制系列) Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series)
德国碳素钢标准(DIN carbon steel standards)
ANSI　|　 BS　|　 DIN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
--------------------------------------------------------------------------------
编号 中文名称 英文名称
DIN 43264-1-1976 缩放仪碳素.第1部分:碳素与插口截面 Pantograph carbons; carbons and socket-sections
DIN 50449-1-1997 半导体工艺用材料的检验.通过红外线吸收测定Ⅲ-Ⅴ-连接半导体杂质含量.第1部分:砷化镓中的碳素 Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 1: Carbon in gallium arsenide
DIN 51909-1998 碳素材料的试验.线性热膨胀系数的测定.固体材料 Testing of carbon materials - Determination of coefficient of linear thermal expansion - Solid materials
DIN 51910-1997 碳素材料检验.耐压强度测定.固体 Testing of carbon materials - Determination of compressive strength - Solid materials
DIN 51911-1997 碳素材料试验.电流电压法测定比电阻.固体 Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters
DIN 51912-1998 碳素材料的试验.氢含量的测定.固体物质 Testing of carbon materials - Determination of hydrogen content - Solid matters
DIN 51913-2001 碳素材料检验.使用氦气比重瓶测定密度.固体材料 Testing of carbon materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 51914-1985 碳素材料检验.抗拉强度测定.固体材料 Testing of carbon materials; determination of tensile strength; solid matters
DIN 51915-1997 碳素材料试验.谐振法测定动力弹性模数.固体 Testing of carbon materials - Determination of dynamic moduls of elasticity by the resonance method - Solid materials
DIN 51916-1987 碳素材料的试验.夯实后表观密度的测定.固体材料 Testing of carbon materials; determination of apparent density after tamping; solid materials
DIN 51917-2002 碳素材料试验.洛氏硬度试验.布式硬度试验方法.固体材料 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN 51925-1996 碳素材料试验.含碳捣实材料试样的备制和体积密度的测定.固体粘接剂和浸渍剂 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN 51926-1997 碳素材料试验.通过定量图像分析测定粘结剂中介晶相含量.粘结剂和浸渍剂 Testing of carbon materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51937-1994 碳素材料检验.各向异性度测定.固体材料 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN 51938-1994 碳素材料试验.通过筛分测定颗粒大小分配.固态物质 Testing of carbon materials; determination of particle size distribution by sieving; solid matters
DIN 51939-2004 碳素材料检验.煅烧焦碳中浮动焦碳成分的测定.固体材料 Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
DIN 51940-1992 碳素材料的试验.取样和样品制备.固体材料.固定粘接剂和浸渍剂 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN 51941-1-1994 碳素材料的试验.化学成分的测定.第1部分:分析备制.固体材料.牢固粘接剂和浸渍剂 Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51942 Berichtigung 1-2006 碳素材料试验.采用脉冲激励法测定动态弹性模量.固体材料.DIN 51942-2002-03勘误 Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
DIN 51944 Berichtigung 1-2006 碳素材料的试验.四点法测定弯曲强度.固体材料.DIN 51944-1999勘误 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigenda to DIN 51944:1999-01
DIN 51944-1999 碳素材料的试验.四点法测定弯曲强度.固体材料 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 65147-1-1987 航空航天.碳素纤维.碳素纤维长丝织物.尺寸、质量 Aerospace; carbon fibres; fabric of carbon fibre filament yarn; dimensions, masses
DIN 65564-1992 航空航天.增强纤维.用HPLC法对碳素长丝纱、织物和短切原丝的浆成份进行定性测定 Aerospace; reinforcement fibres; qualitative determination of size constituents of carbon filament yarns, woven fabrics and chopped strands by HPLC
DIN 65565-1992 航空航天.增强纤维.用红外分光法对碳素长丝纱、织物和短切原丝的浆类型进行定性试验 Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy
DIN 65566-1992 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的浆含量的测定 Aerospace; reinforcement fibres; determination of size content of carbon filament yarns, woven fabrics and chopped strands
DIN 65568-1992 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的耐热氧化性能的测定 Aerospace; reinforcement fibres; determination of thermal oxidative resistance of carbon filament yarns, woven fabrics and short cuts
DIN EN 13293-2003 可运输的储气瓶.压缩、液化和不溶性气体用水容量不超过0.5升以及二氧化碳用水容量不超过1升的可反复灌装可 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide; German version EN 13293:2002
DIN EN 2561-1995 航空航天系列.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验; 德文版本 EN 2561:1995 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995
DIN EN 723-1996 铜和铜合金.燃烧法测定铜管或管件内表面碳素的方法 Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings; German version EN 723:1996
DIN EN ISO 2566-1-1999 钢.断裂伸长值的换算.第1部分:碳素钢和低合金钢（ISO 2566-1-1999) Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984); German version EN ISO 2566-1:1999
DIN ISO 12980-2006 铝生产用碳素材料.电极用生焦和煅烧焦.X射线荧光分析法(ISO 12980-2000) Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method (ISO 12980:2000)
中国碳素钢标准(GB carbon steel standards)
ANSI　|　 BS　|　 DIN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
--------------------------------------------------------------------------------
编号 中文名称 英文名称
GB/T 11253-2007 碳素结构钢冷轧薄钢板及钢带 ()
GB/T 12228-2006 通用阀门 碳素钢锻件技术条件 General purpose industrial valves - Specification of carbon steel forgings
GB/T 12229-2005 通用阀门碳素钢铸件技术条件 General Purpose industrial valves-Specification of carbon steel castings
GB/T 1298-1986 碳素工具钢技术条件 Carbon tool steels--Technical requirements
GB/T 13237-1991 优质碳素结构钢冷轧薄钢板和钢带 Cold-rolled quality carbon structural steel sheets and strips
GB/T 14292-1993 碳素结构钢和低合金结构钢热轧条钢技术条件 Hot-rolled long products technical requirements for carbon structure steel and low-alloy structure steel
GB/T 17600.1-1998 钢的伸长率换算第1部分:碳素钢和低合金钢 Steel--Conversion of elongation values--Part 1:Carbon and low alloy steels
GB/T 3274-2007 碳素结构钢和低合金结构钢热轧厚钢板和钢带 ()
GB/T 3278-2001 碳素工具钢热轧钢板 Hot-rolled carbon tool steel sheets and plates
GB/T 3522-1983 优质碳素结构钢冷轧钢带 Cold-rolled quality carbon structural steel strips
GB/T 3524-2005 碳素结构钢和低合金结构钢热轧钢带 Hot-rolled carbon and low alloy structural steel strips
GB/T 4336-2002 碳素钢和中低合金钢火花源原子发射光谱分析方法(常规法) Standard testmethod for spark discharge atomic emission--Spectrometric analysis of carbon and low-alloy steel(routine method)
GB/T 4354-1994 优质碳素钢热轧盘条 Hot-rolled quality carbon steel wire rods
GB/T 4357-1989 碳素弹簧钢丝 Carbon spring steel wires
GB/T 5065-2004 热镀铅锡合金碳素钢冷轧薄钢板及钢带 Hot-dip lead-tin alloy coated cold rolled carbon steel sheets and strips
GB/T 699-1999 优质碳素结构钢 Quality carbon structural steels
GB/T 700-2006 碳素结构钢 Carbon structural steels
GB/T 710-1991 优质碳素结构钢热轧薄钢板和钢带 Hot-rolled quality carbon structural steel sheets and strips
GB/T 711-1988 优质碳素结构钢热轧厚钢板和宽钢带 Hot-rolled quality carbon structuralsteel plates and wide strips
GB/T 715-1989 标准件用碳素钢热轧圆钢 Hot-rolled round carbon steel bars for standard parts
GB/T 716-1991 碳素结构钢冷轧钢带 Cold-rolled carbon structural steel strips
GB/T 7659-1987 焊接结构用碳素钢铸件 Carbon steel castings suitable for welded structure
GB/T 8749-1988 优质碳素结构钢热轧钢带 Hot-rolled quality carbon structural steel strips
GB/T 912-1989 碳素结构钢和低合金结构钢热轧薄钢板及钢带 Hot-rolled plain carbon and low alloy structural steel sheets and strips
HG/T 3145-1985 普通碳素钢及低合金钢贮罐标准系列 ()
JB 4726-2000 压力容器用碳素钢和低合金钢锻件 ()
JB 4727-2000 低温压力容器用碳素钢和低合金钢锻件 ()
JB/T 2555-1979 碳素钢、低合金钢人、手孔分类与技术条件 ()
JB/T 6394-1992 大型锻件用碳素工具钢 ()
JB/T 6397-2006 大型碳素结构钢锻件 技术条件 Specification for the heavy carbon structural steel forgings
JB/T 6831-1993 电测量仪表用碳素纤维指针 ()
QB/T 2063-2007 碳素墨水 Carbonic ink
YB/T 023-1992(2005) 金属软管用碳素钢冷轧钢带 ()
YB/T 125-1997 光缆用镀锌碳素钢丝 ()
YB/T 153-1999(2006年确认) 优质碳素结构钢和合金结构钢连铸方坯低倍组织缺陷评级图 ()
YB/T 4155-2006 标准件用碳素钢热轧圆钢及盘条 Hot-rolled round carbon steel bars and rods for standard parts
YB/T 5061-2007 手表用碳素工具钢冷轧钢带 ()
YB/T 5066-1993(2005) 自行车用热轧碳素钢和低合金钢宽钢带及钢板 ()
YB/T 5144-2006 轴承保持器用碳素结构钢丝 Carbon structural steel wires for bearing cages
YB/T 5303-2006 优质碳素结构钢丝 ()
YB/T 5305-2006 普通碳素钢电线套管 ()
YB/T 5311-2006 重要用途碳素弹簧钢丝 ()
YB/T 5322-2006 碳素工具钢丝 ()
YS/T 63.1-2006 铝用碳素材料检测方法　第1部分：阴极糊试样焙烧方法、焙烧失重的测定及生坯试样表观密度的测定 ()
YS/T 63.11-2006 铝用碳素材料检测方法　第11部分：空气反应性的测定　质量损失法 ()
YS/T 63.12-2006 铝用碳素材料检测方法　第12部分：预焙阳极CO2反应性的测定　质量损失法 ()
YS/T 63.13-2006 铝用碳素材料检测方法　第13部分：杨氏模量的测定　静测法 ()
YS/T 63.14-2006 铝用碳素材料检测方法　第14部分：抗折强度的测定　三点法 ()
YS/T 63.16-2006 铝用碳素材料检测方法　第16部分：微量元素的测定X射线荧光光谱分析方法 ()
YS/T 63.2-2006 铝用碳素材料检测方法　第2部分：阴极炭块和预焙阳极　室温电阻率的测定 ()
YS/T 63.3-2006 铝用碳素材料检测方法　第3部分：热导率的测定　比较法 ()
YS/T 63.4-2006 铝用碳素材料检测方法　第4部分：热膨胀系数的测定 ()
YS/T 63.5-2006 铝用碳素材料检测方法　第5部分：有压下底部炭块钠膨胀率的测定 ()
YS/T 63.6-2006 铝用碳素材料检测方法　第6部分：开气孔率的测定　液体静力学法 ()
YS/T 63.7-2006 铝用碳素材料检测方法　第7部分：表观密度的测定　尺寸法 ()
YS/T 63.8-2006 铝用碳素材料检测方法　第8部分：二甲苯中密度的测定　比重瓶法 ()
ISO碳素钢标准(ISO carbon steel standards)
ANSI　|　 BS　|　 DIN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
--------------------------------------------------------------------------------
编号 中文名称 英文名称
EN ISO 2566-1-1999 钢伸长值的换算　第1部分：碳素钢和低合金钢 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
ISO 10142-1996 铝生产用碳素材料 煅烧焦 用实验室振动磨测定粒度稳定性 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
ISO 10143-1995 铝生产用碳素材料 电极用煅烧焦 颗粒电阻率的测定 Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
ISO 10236-1995 铝生产用碳素材料 电极用生焦和煅烧焦 松(紧装)密度的测定 Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped)
ISO 10237-1997 铝生产用碳素材料 煅烧焦 残余氢含量的测定 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content
ISO 10238-1999 铝生产用碳素材料 电极用沥青 仪器法测定硫含量 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
ISO 10384-2001 用化学结构定义的热轧碳素钢板 Hot-rolled carbon steel sheet as defined by chemical composition
ISO 10460-2005 储气瓶.焊接的碳素钢储气瓶.定期检验和试验 Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing
ISO 11412-1998 铝生产用碳素材料 煅烧焦 水分测定 Carbonaceous materials for the production of aluminium - Calcined coke - Determination of water content
ISO 11713-2000 铝生产用碳素材料 阴极碳块和焙烧阳极 室温下电阻率的测定 Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature
ISO 12977-1999 铝生产用碳素材料 电极用沥青 挥发分的测定 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content
ISO 12979-1999 铝生产用碳素材料 电极用沥青 喹啉不溶物中C/H比的测定 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction
ISO 12980-2000 铝生产用碳素材料 电极用生焦和煅烧焦 X射线荧光分析 Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method
ISO 12981-1-2000 铝生产用碳素材料 煅烧焦 对二氧化碳反应性的测定 第1部分:失重法 Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method
ISO 12982-1-2000 铝生产用碳素材料 煅烧焦 对空气反应性的测定 第1部分:灼烧温度法 Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method
ISO 12984-2000 铝生产用碳素材料 煅烧焦 粒度分布的测定 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution
ISO 12985-1-2000 铝生产用碳素材料 焙烧阳极和阴极碳块 第1部分:用尺寸法测定表观密度 Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method
ISO 12985-2-2000 铝生产用碳素材料 焙烧阳极和阴极碳块 第2部分:用静流法测定表观密度和开口孔隙率 Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method
ISO 12986-1-2000 铝生产用碳素材料 预焙阳极和阴极碳块 第1部分:用三点法测定抗弯强度/剪切强度 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method
ISO 12986-2-2005 铝生产用碳素材料.预焙阳极和阴极碳块.第2部分:用四点法测定抗弯强度 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method
ISO 12988-1-2000 铝生产用碳素材料 焙烧阳极 二氧化碳反应性的测定 第1部分:失重法 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method
ISO 12988-2-2004 铝生产用碳素材料.焙烧阳极.二氧化碳反应性的测定.第2部分:热解重量分析法 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method
ISO 12989-1-2000 铝生产用碳素材料 焙烧阳极和部碳块 空气反应性的测定 第1部分:失重法 Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 1: Loss in mass method
ISO 12989-2-2004 铝生产用碳素材料.焙烧阳极和部碳块.空气反应性的测定.第2部分:热重分析法 Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method
ISO 14422-1999 铝生产用碳素材料 冷压糊料 取样方法 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Methods of sampling
ISO 14428-2005 铝生产用碳素材料.冷和微温冲压浆料.烘烤时的膨胀/收缩 Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking
ISO 20203-2005 铝生产中使用的碳素材料.煅烧焦炭.用X-射线衍射法测定煅烧石油焦的晶体粒度 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction
ISO 2566-1-1984 钢 伸长值的换算 第1部分:碳素钢和低合金钢 Steel; Conversion of elongation values; Part 1 : Carbon and low alloy steels
ISO 3573-1999 商品级和冲压级热轧碳素钢薄板 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 3574-1999 商品级和冲压级冷轧碳素钢薄板 Cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 3575-2005 商品级和冲压级连续热镀锌碳素钢薄板 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
ISO 4960-1999 碳含量大于0.25%的冷轧碳素钢带 Cold-reduced carbon steel strip with a carbon content over 0,25 %
ISO 4998-2005 结构质量的连续热浸锌覆层碳素薄钢板 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
ISO 4999-2005 商用、拉制和建筑用连续热镀锡(铅合金)冷轧碳素薄钢板 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
ISO 5000-2005 商品级及拉伸级连续热浸镀铝-硅冷轧碳素钢薄板 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 5001-1999 玻璃搪瓷用冷轧碳素薄钢板 Cold-reduced carbon steel sheet for vitreous enamelling
ISO 5002-1999 商品级和冲压级热轧和冷轧电镀锌碳素薄钢板 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
ISO 5931-2000 铝生产用碳素材料 煅烧焦和煅烧碳产品 用艾氏卡法测定全硫含量 Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method
ISO 5939-1980 铝生产用碳素材料 电极用沥青 水含量的测定 共沸蒸馏(Dean and Stark)法 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method
ISO 5940-1981 铝生产用碳素材料 电极用沥青 用环和球法测定软化点 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method
ISO 5950-2000 商品级和冲压级连续电镀锡冷轧碳素薄钢板 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 5954-1998 按硬度要求冷轧碳素薄钢板 Cold-reduced carbon steel sheet according to hardness requirements
ISO 6257-2002 铝生产用碳素材料.电极用沥青.取样 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling
ISO 6317-2000 商品级和冲压级热轧碳素钢带 Hot-rolled carbon steel strip of commercial and drawing qualities
ISO 6375-1980 铝生产用碳素材料 电极用焦 取样 Carbonaceous materials for the production of aluminium; Cokes for electrodes; Sampling
ISO 6376-1980 铝生产用碳素材料 电极用沥青 甲苯不溶物含量的测定 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of content of toluene-insoluble material
ISO 65-1981 按照ISO 7/1 车螺纹的碳素钢管 Carbon steel tubes suitable for screwing in accordance with ISO 7/1
ISO 6791-1981 铝生产用碳素材料 电极用沥青 喹啉不溶物含量的测定 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of contents of quinoline-insoluble material
ISO 6932-2001 最高含碳量为0.25%的冷轧碳素钢带 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 6997-1985 铝生产用碳素材料 煅烧焦 表观油含量的测定 加热法 Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method
ISO 6998 Technical Corrigendum 1-1999 铝生产用碳素材料 电极用沥青 焦化值的测定 技术勘误1 Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1
ISO 6998-1997 铝生产用碳素材料 电极用沥青 焦化值的测定 Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value
ISO 6999-1983 铝生产用碳素材料 电极用沥青 密度的测定 比重瓶法 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method
ISO 8003-1985 铝生产用碳素材料 电极用沥青 动态粘度的测定 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity
ISO 8004-1985 铝生产用碳素材料 煅烧焦和煅烧碳产品 二甲苯密度的测定 比重瓶法 Carbonaceous materials for the production of aluminium; Calcined coke and calcined carbon products; Determination of the density in xylene; Pyknometric method
ISO 8005-2005 铝生产用碳素材料.生焦炭和煅烧焦炭.灰分含量的测定 Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
ISO 8006-1985 铝生产用碳素材料 电极用沥青 灰分的测定 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Determination of ash
ISO 8007-1-1999 铝生产用碳素材料 单个材料的取样方案和取样 第1部分:阴极块 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks
ISO 8007-2-1999 铝生产用碳素材料 单个材料的取样方案和取样 第2部分:预焙阳极 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 2: Prebaked anodes
ISO 8007-3-2003 铝生产用碳素材料.单个材料的取样方案和取样.第3部分:侧墙砖 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks
ISO 8658-1997 铝生产用碳素材料 未煅烧和煅烧焦 火焰原子吸收光谱法测定痕量元素 Carbonaceous materials for use in the production of aluminium - Green and calcined coke - Determination of trace elements by flame atomic absorption spectroscopy
ISO 8723-1986 铝生产用碳素材料 煅烧焦 油含量的测定 溶剂萃取法 Carbonaceous materials for the production of aluminium; Calcined coke; Determination of oil content; Method by solvent extraction
ISO 9055-1988 铝生产用碳素材料 电极用沥青 用氧弹法测定硫含量 Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method
ISO 9088-1997 铝生产用碳素材料 预焙阳极和阴极块 用比重瓶法测定二甲苯密度 Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method
ISO 9406-1995 铝生产用碳素材料 焦碳 用重量分析法测定挥发物的含量 Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis
ISO/TS 14423-1999 铝生产用碳素材料 冷压糊 通过喹啉萃取和测定聚焦体尺寸分布来测定有效粘接剂含量和聚焦体含量 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution
ISO/TS 14425-1999 铝生产用碳素材料 冷压糊 未焙烧糊料的挥发物含量的测定 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes
prEN 2160-1978 航空航天系列 飞行器控制用涂锌碳素钢软钢丝绳、结构、尺寸、负载 Flexible wire ropes for aircraft controls in zinc coated carbon steel; construction, dimensions, loads; Aerospace series
日本碳素钢标准(JIS carbon steel standards)
ANSI　|　 BS　|　 DIN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
--------------------------------------------------------------------------------
编号 中文名称
日本語標題 英文名称
JIS B1051-2000 碳素钢和合金钢紧固件的机械特性.第1部分:螺栓、螺钉和螺柱
炭素鋼及び合金鋼製締結用部品の機械的性質　―　第１部：ボルト，ねじ及び植込みボルト Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs
JIS B1051 ERRATUM 1-2001 碳素钢和合金钢紧固件的机械特性.第1部分:螺栓、螺钉和螺柱(勘误1)
(Erratum 1)
JIS C6444-1991 电子设备用可变碳素电阻器.特性Y、W及UC
電子機器用炭素系混合体可変抵抗器　―　特性Ｙ，Ｗ及びＵＣ Variable carbon composition resistors for use in electronic equipment -- Characteristics Y, W and UC
JIS G0587-1995 碳素钢及低合金钢锻件的超声检验方法
炭素鋼鍛鋼品及び低合金鋼鍛鋼品の超音波探傷試験方法 Methods of ultrasonic examination for carbon and low alloy steel forgings
JIS G3103-2007 锅炉和压力容器用碳素钢及钼合金钢板
ボイラ及び圧力容器用炭素鋼及びモリブデン鋼鋼板 Carbon steel and molybdenum alloy steel plates for boilers and pressure vessels
JIS G3118-2005 中温设备压力容器用碳素钢板
中?常温圧力容器用炭素鋼鋼板 Carbon steel plates for pressure vessels for intermediate and moderate temperature services
JIS G3123-2004 冷拉碳素和合金钢棒
みがき棒鋼 Cold finished carbon and alloy steel bars
JIS G3126-2004 低温压力容器用碳素钢板
低温圧力容器用炭素鋼鋼板 Carbon steel plates for pressure vessels for low temperature service
JIS G3132-2005 管道用热轧碳素钢带材
鋼管用熱間圧延炭素鋼鋼帯 Hot-rolled carbon steel strip for pipes and tubes
JIS G3141-2005 冷轧碳素薄钢板和钢带
冷間圧延鋼板及び鋼帯 Cold-reduced carbon steel sheets and strips
JIS G3201-1988 一般用途碳素钢锻件
炭素鋼鍛鋼品 Carbon steel forgings for general use
JIS G3201-1988 / AMENDMENT(2008) 一般用途碳素钢锻件(修改件1)
炭素鋼鍛鋼品(追補１) Carbon steel forgings for general use (Amendment 1)
JIS G3202-1988 压力容器用碳素钢锻件
圧力容器用炭素鋼鍛鋼品 Carbon steel forgings for pressure vessels
JIS G3202-1988 / AMENDMENT(2008) 压力容器用碳素钢锻件(修改件1)
圧力容器用炭素鋼鍛鋼品(追補１) Carbon steel forgings for pressure vessels (Amendment 1)
JIS G3205-1988 低温压力容器用碳素钢及合金钢锻件
低温圧力容器用鍛鋼品 Carbon and alloy steel forgings for pressure vessels for low-temperature service
JIS G3205-1988 / AMENDMENT(2008) 低温压力容器用碳素钢及合金钢锻件(修改件1)
低温圧力容器用鍛鋼品(追補１) Carbon and alloy steel forgings for pressure vessels for low-temperature service (Amendment 1)
JIS G3251-1988 锻件用碳素钢初轧钢坯和钢坯
炭素鋼鍛鋼品用鋼片 Carbon steel blooms and billets for forgings
JIS G3444-2006 一般结构用碳素钢管
一般構造用炭素鋼鋼管 Carbon steel tubes for general structural purposes
JIS G3445-2006 机械结构用碳素钢管
機械構造用炭素鋼鋼管 Carbon steel tubes for machine structural purposes
JIS G3452-2004 普通管系用碳素钢管
配管用炭素鋼管 Carbon steel pipes for ordinary piping
JIS G3454-2005 压力设备用碳素钢管
圧力配管用炭素鋼鋼管 Carbon steel pipes for pressure service
JIS G3455-2005 高压设备用碳素钢管
高圧配管用炭素鋼鋼管 Carbon steel pipes for high pressure service
JIS G3456-2004 高温管路用碳素钢管
高温配管用炭素鋼管 Carbon steel pipes for high temperature service
JIS G3457-2005 电弧焊碳素钢管
配管用アーク溶接炭素鋼鋼管 Arc welded carbon steel pipes
JIS G3461-2005 锅炉与热交换器用碳素钢管
ボイラ?熱交換器用炭素鋼鋼管 Carbon steel boiler and heat exchanger tubes
JIS G3472-1988 汽车结构用电阻焊碳素钢钢管
自動車構造用電気抵抗溶接炭素鋼鋼管 Electric resistance welded carbon steel tubes for automobile structural purposes
JIS G3473-2007 汽缸套筒用碳素钢钢管
シリンダチューブ用炭素鋼鋼管 Carbon steel tubes for cylinder barrels
JIS G3475-2008 建筑结构用碳素钢管
建築構造用炭素鋼鋼管 Carbon steel tubes for building structure
JIS G3507-1-2005 冷镦用碳素钢.第1部分:盘条
冷間圧造用炭素鋼－第１部：線材 Carbon steels for cold heading -- Part 1: Wire rods
JIS G3507-2-2005 冷镦用碳素钢.第2部分:线材
冷間圧造用炭素鋼－第２部：線 Carbon steels for cold heading -- Part-2: Wires
JIS G4051-2005 机械结构用碳素钢
機械構造用炭素鋼鋼材 Carbon steels for machine structural use
JIS G4401-2006 碳素工具钢
炭素工具鋼鋼材 Carbon tool steels
JIS G4804-2008 易切削碳素钢
硫黄及び硫黄複合快削鋼鋼材 Free-cutting steels
JIS G5101-1991 碳素钢铸件
炭素鋼鋳鋼品 Carbon steel castings
JIS G5111-1991 结构用高抗拉强度碳素钢及低合金钢铸件
構造用高張力炭素鋼及び低合金鋼鋳鋼品 High tensile strength carbon steel castings and low alloy steel castings for structural purposes
JIS G7124-2000 商业和拉伸质量用连续热浸铝/硅镀层碳素钢薄板材
一般及び絞り用連続溶融アルミニウム／シリコンめっき冷間圧延炭素鋼鋼板（ＩＳＯ仕様） Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
JIS G7305-2000 机械弹簧用钢丝.第2部分:冷拉拔碳素钢钢丝
ばね用鋼線　―　第２部：冷間引抜炭素鋼線（ＩＳＯ仕様） Steel wire for mechanical springs -- Part 2: Cold-drawn carbon steel wire
JIS G7821-2000 一般工程用铸造碳素钢
一般産業機械用炭素鋼鋳鋼品 Cast carbon steels for general engineering purposes
JIS R7601-1986 碳素纤维的试验方法
炭素繊維試験方法(廃止) Testing methods for carbon fibers
JIS R7601 AMD 1-2006 碳素纤维的试验方法（修改件1）
炭素繊維試験方法（追補１）(廃止) Testing methods for carbon fibers (Amendment 1)
JIS R7602-1995 碳素纤维纺织物的测试方法
炭素繊維織物試験方法 Testing methods for carbon fibre woven fabrics
法国碳素钢标准(NF carbon steel standards)
ANSI　|　 BS　|　 DIN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
--------------------------------------------------------------------------------
编号 中文名称 英文名称
NF A03-174-1999 钢.伸长值的换算.第1部分:碳素钢和低合金钢 (Steel. Conversion of elongation values. Part 1 : carbon and low alloy steels.)
NF A35-596-1987 冶金产品.碳素刀具钢 (Iron and steel. Carbon steels for cutlery.)
NF L17-409-1998 航空航天系列.碳素纤维增强塑料.单向分层.垂直于纤维方向的拉伸试验 (Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.)
NF L17-410-1996 航空和航天.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验 (Aerospace series. Carbon fibre reinforced plastics. Unidirectioneal laminates. Tensile test parallel to the fibre direction.)
NF L17-413-1998 航空航天系列.碳素纤维层压材料.纤维.树脂和空隙量的测定 (AEROSPACE SERIES. CARBON FIBRE LAMINATES. DETERMINATION OF THE FIBRE, RESIN AND VOID CONTENTS. (EUROPEAN STANDARD EN 2564).)
NF L17-454-1998 航空航天系列.预浸渍碳素纤维.树脂流测定 (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2560).)
NF T20-186-1989 生产铅用碳素材料.生焦炭.用重量分析测定挥发物含量 (Carbonaceous materials for the production of aluminium. Green coke. Determination of volatile matter content by gravimetric analysis.)