国内外合金标准 alloy standards

国内外合金标准 alloy standards
美国合金标准(ANSI alloy standards)
ANSI B16.18-2001 铸铜合金焊锡连接压力配件 Cast Copper Alloy Solder Joint Pressure Fittings
ANSI B212.1-2002 硬质合金坯料、钎焊和实心单点工具 Carbide Blanks, Brazed and Solid Single-Point Tools
ANSI B212.14-2002 销锁扣型固定器用带转位刀片的硬质合金座 Carbide Seats Used with Indexable Inserts for Pin Lock-Type Holders
ANSI B212.15-1994 切削工具.硬质合金镶嵌钻头的砖砌体钻及其砖砌体钻的毛坯 Cutting tools - Carbide-tipped masonry drills and blanks for carbide-tipped masonry drills
ANSI B212.16-2000 切削工具.硬质合金圆头锉坯料 Cutting Tools - Blanks for Carbide Burs
ANSI B212.2-1984 切削工具.夹紧型刀柄夹持器用的带可转位镶嵌刀片的硬质合金刀座 Cutting Tools - Carbide Seats Used with Indexable Inserts for Clamp-Type Holders
ANSI B212.7-1993 切削工具.硬质合金工具工业中使用的螺纹紧固件 Cutting tools - Threaded fasteners used in the carbide tooling industry
ANSI B212.8-2002 切削工具.麻花钻、铰刀、端铣刀和任选钻杆用硬质合金坯料 Cutting Tools - Carbide Blanks for Twist Drills, Reamers, End Mills, and Random Rod
ANSI B212.9-1994 可倾斜圆盘锯用硬质合金坯料 Carbide Blanks for Tipping Circular Saws
ANSI B94.47M-1980 夹紧式刀具夹持器用的与可转位刀片一起使用的硬质合金断屑器 Carbide chip breakers used with indexable inserts for clamp type holders
ANSI H35.1/H 35.1M-2006 铝材的美国国家标准合金和回火名称与符号注册系统 American National Standard Alloy and Temper Designation Systems for Aluminum
ANSI H35.4-2006 非合金铝的命名与符号系统 Designation System for Unalloyed Aluminum
ANSI/AAMI/ISO 10993-15-2000 医疗器械的生物学评价.第15部分:金属与合金降解产物的识别与定量 Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys
ANSI/ADA 1-2003 汞齐和牙科汞用合金 Alloy for Amalgam and Dental Mercury
ANSI/ADA 109-2006 存放牙科汞合金废料法和汞合金废料储存/船载集装箱要求 Procedures for Storing Dental Amalgam Waste and Requirements for Amalgam Waste Storage/Shipment Containers
ANSI/ADA 14-1982 牙科用铬钴铸造合金 Casting Alloy, Dental Chromium-Cobalt
ANSI/ADA 2-2002 牙科金合金用石膏粘结铸造精密模 Gypsum-Bonded Casting Investment for Dental Gold Alloy
ANSI/ADA 5-1997 牙科铸模合金 Dental Casting Alloys
ANSI/ADA 88-2000 牙科用青铜合金 Dental Brazing Alloys
ANSI/API RP578-1999 新的和原有合金管系统的材料检定程序 Material Verification Program for New and Existing Alloy Piping Systems
ANSI/ASME B16.22-2001 锻铜和铜合金钎焊接压力连接件 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
ANSI/ASME B16.23-2002 DWV铸铜合金钎焊连接排水配件 Cast Copper Alloy Solder Joint Drainage Fittings: DWV
ANSI/ASME B16.24-2006 铸铜合金管法兰和法兰配件:等级150、300、600、900、1500和2500 Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500, and 2500
ANSI/ASME B16.26-2006 青铜扩口管用铸铜合金配件 Cast Copper Alloy Fittings for Flared Copper Tubes
ANSI/ASME B16.29-2007 DWV型锻铜和锻铜合金钎焊排水配件 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV
ANSI/ASME B16.50-2001 锻造铜及铜合金钎焊承压配件 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings
ANSI/ASTM A1018-2001 片钢和带钢、厚卷材、热轧、高强度低合金结构碳钢以及改良可模塑高强度钶或钒低合金钢规范 Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy With Improved Formability
ANSI/ASTM A182/A 182M-2001 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ANSI/ASTM A193/A 193M-2001 高温设备用合金钢和不锈钢螺栓材料规范 Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
ANSI/ASTM A194/A 194M-2001 高压和高温设备用碳素钢与合金钢螺栓和螺母规范 Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service
ANSI/ASTM A213/A 213M-2001 锅炉、过热器和热交换器用无缝铁素体和奥氏体合金钢管规范 Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ANSI/ASTM A265-1994 镍及镍基合金复合钢板规范 Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
ANSI/ASTM A320/A 320M-2001 低温设备用合金钢螺栓材料规范 Specification for Alloy-Steel Bolting Materials for Low-Temperature Service
ANSI/ASTM A427-1996 冷轧和热轧用锻制合金钢辊规范 Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
ANSI/ASTM A450-1996 碳素钢管、铁素体合金钢管及奥氏体合金钢管规范 Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ANSI/ASTM A494/A 494M-2001 镍和镍合金铸件规范 Specification for Castings, Nickel and Nickel Alloy
ANSI/ASTM A608-1991 高温承压设备用离心铸造铁铬镍高合金钢管规范 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
ANSI/ASTM A668-1996 工业用普通碳素钢和合金钢锻件规范 Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ANSI/ASTM A709/A 709M-2001 桥梁用碳素钢和高强度低合金结构型钢、钢板、钢棒及调质合金结构钢棒规范 Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
ANSI/ASTM A712-1997 软磁性合金电阻率测试方法 Test Method for Electrical Resistivity of Soft Magnetic Alloys
ANSI/ASTM A743/A 743M-1998 普通耐腐蚀铬铁及镍铬铁合金铸件规范 Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion-Resistant, for General Application
ANSI/ASTM A753-1997 镍铁软磁合金规范 Specification for Nickel-Iron Soft Magnetic Alloys
ANSI/ASTM A768-1996 涡轮机转子及轴用经真空处理的12/T%铬合金钢锻件规范 Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
ANSI/ASTM A801/A 801M-1999 铁钴高磁性饱和合金规范 Specification for Iron-Cobalt High Magnetic Saturation Alloys
ANSI/ASTM A837-1996 渗碳合金钢锻件规范 Specification for Steel Forgings, Alloy, for Carburizing Applications
ANSI/ASTM A838-1997 继电器用易切铁素体不锈软磁合金规范 Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications
ANSI/ASTM A901-1997 半成品型非晶磁芯合金规范 Specification for Amorphous Magnetic Core Alloys Semi-Processed Types
ANSI/ASTM A904-1998 50镍-50铁粉末冶金(P/M)软磁合金规范 Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
ANSI/ASTM A940-1996 涡轮转子用差温热处理真空处理钢锻件、合金规范 Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
ANSI/ASTM B102-2000 铅和锡合金压模铸件规范 Specification for Lead and Tin Alloy Die Castings
ANSI/ASTM B127-1993 镍铜合金(UNS N04400)板、薄板和带材规范 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ANSI/ASTM B163-2001 无缝镍和镍合金冷凝和热交换管规范 Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ANSI/ASTM B164-1993 镍铜合金条材、棒材和线材规范 Specification for Nickel-Copper Alloy Rod, Bar, and Wire
ANSI/ASTM B165-1996 无缝镍铜合金(UNS N04400)管规范 Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube
ANSI/ASTM B166-2001 镍铬铁合金(UNS N06600, N06601, and N06690)及镍铬钴钼合金(UNS N06617)条材、棒材及线材规范 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
ANSI/ASTM B167-2001 无缝镍铬铁合金(UNS N06600, N06601, and N06690)管规范 Specification for Nickel-Chromium-Iron Alloy (UNS N06600, N06601, and N06690) Seamless Pipe and Tube
ANSI/ASTM B168-2001 镍铬铁合金(UNS N06600, N06601 and N06690)及镍铬钴钼合金(UNS N06617)板、薄板和带材规范 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601 and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, And Strip
ANSI/ASTM B240-2001 压模铸锭中锌合金规范 Specification for Zinc Alloys in Ingot Form for Die Castings
ANSI/ASTM B327-2001 锌压模铸造合金的主要合金规范 Specification for Master Alloys Used in Making Zinc Die Casting Alloys
ANSI/ASTM B333-1998 镍钼合金板、薄板和带材规范 Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
ANSI/ASTM B335-1998 铌钼合金棒材规范 Specification for Nickel-Molybdenum Alloy Rod
ANSI/ASTM B344-2002 电气加热元件用拉制或轧制镍-铬合金及镍-铬-铁合金规范 Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
ANSI/ASTM B366-2001 工厂锻压镍和镍合金配件规范 Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ANSI/ASTM B407-1996 镍铁铬合金无缝管规范 Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ANSI/ASTM B408-1996 镍铁铬合金杆材和棒材规范 Specification for Nickel-Iron-Chromium Alloy Rod and Bar
ANSI/ASTM B409-1996 镍铁铬合金板材、薄板材和带材规范 Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ANSI/ASTM B423-1999 镍铁铬钼铜合金(UNS N08825 and UNS N08221)无缝管规范 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and UNS N08221) Seamless Pipe and Tube
ANSI/ASTM B424-1998 镍铁铬钼铜合金(UNS N08825 and N08221)板、薄板及带材规范 Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Plate, Sheet, and Strip
ANSI/ASTM B425-1999 镍铁铬钼铜合金(UNS N08825 and UNS N08221)杆材和棒材规范 Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Rod and Bar
ANSI/ASTM B434-2000 镍钼铬铁合金(UNS N10003)板、薄板和带材规范 Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003) Plate, Sheet, and Strip
ANSI/ASTM B443-2000 镍铬钼钶合金(UNS N06625)板、薄板和带材规范 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Plate, Sheet, and Strip
ANSI/ASTM B444-2000 镍铬钼钶合金(UNS N06625)管规范 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Pipe and Tube
ANSI/ASTM B446-2000 镍铬钼钶合金(UNS N06625)条材和棒材规范 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Rod and Bar
ANSI/ASTM B464-1999 UNS NO8020、UNS NO8024和UNS NO8026合金焊管规范 Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Pipe
ANSI/ASTM B468-1999 UNS NO8020、UNS NO8024和UNS NO8026合金焊管规范 Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Tubes
ANSI/ASTM B471-1996 UNS NO8020、UNS NO8026和UNS NO8024镍合金弹簧丝规范 Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Spring Wire
ANSI/ASTM B473-1996 UNS NO8020、UNS NO8026及UNS NO8024镍合金棒材和线材规范 Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Bar and Wire
ANSI/ASTM B474-1999 UNS NO8020、UNS NO8026和UNS NO8024镍合金电熔焊管规范 Specification for Electric Fusion Welded UNS N08020, UNS N08026, and UNS N08024 Nickle Alloy Pipe
ANSI/ASTM B512-1999 镍铬硅合金(UNS N08330)坯料和棒材规范 Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
ANSI/ASTM B514-1996 镍铁铬合金焊管规范 Specification for Welded Nickel-Iron-Chromium Alloy Pipe
ANSI/ASTM B515-1996 UNS NO8800、UNS N08810和UNS NO8811合金焊管规范 Specification for Welded UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
ANSI/ASTM B516-1998 镍铬铁合金(UNS N06600) UNS N06025 and UNS N06045焊管规范 Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600) UNS N06025 and UNS N06045 Tubes
ANSI/ASTM B517-1998 镍铬铁合金(UNS N06600) UNS N06025 and N06045焊管试验方法 Test Method for Welded Nickel-Chromium-Iron-Alloy (UNS N06600) UNS N06025 and N06045 Pipe
ANSI/ASTM B522-2001 金银铂电触点合金规范 Specification for Gold-Silver-Platinum Electrical Contact Alloy
ANSI/ASTM B535-1999 镍铁铬硅合金(UNS N08330 and UNS N08332)无缝管规范 Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS N08332) Seamless Pipe
ANSI/ASTM B536-1996 镍铁铬硅合金板材、薄板材及带材规范 Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
ANSI/ASTM B541-2001 金电触点合金规范 Specification for Gold Electrical Contact Alloy
ANSI/ASTM B546-1998 电熔焊接镍铬钶钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330 and UNS N08332)、 镍铬铁合金(UNS N06025)和 Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ANSI/ASTM B563-2001 钯银铜电触点合金规范 Specification for Palladium-Silver-Copper Electrical Contact Alloy
ANSI/ASTM B573-2000 镍钼铬铁合金(UNS N10003)棒材规范 Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003) Rod
ANSI/ASTM B574-1999 低碳镍钼铬,低碳镍铬钼和低碳镍铬钼钨合金棒规范 Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ANSI/ASTM B575-1999 低碳镍钼铬和低碳镍铬钼合金板、薄板及带材规范 Specification for Low-Carbon Nickel-Molybdenum-Chromium and Low-Carbon Nickel-Chromium-Molybdenum Alloy Plate, Sheet, and Strip
ANSI/ASTM B581-1997 镍铬铁钼铜合金棒规范 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ANSI/ASTM B582-1996 镍铬铁钼铜合金板材、薄板材及带材规范 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
ANSI/ASTM B603-2001 电加热元件的拉伸或辊轧铁铬铝合金规范 Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ANSI/ASTM B619-2000 焊接用镍和镍钴合金管规范 Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ANSI/ASTM B621-1996 镍铁铬钼合金(UNS N08320)棒材规范 Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
ANSI/ASTM B622-2000 无缝镍和镍钴合金管规范 Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ANSI/ASTM B626-2001 焊接镍和镍钴合金管规范 Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
ANSI/ASTM B637-1998 高温工作沉淀硬化镍合金棒材、锻件及锻坯规范 Specification for Precipitation Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
ANSI/ASTM B639-1996 高温设备用沉积硬化含钴合金杆材、棒材、锻件和锻造坯料规范 Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
ANSI/ASTM B649-1996 镍铁铬钼铜低碳合金(UNS N08904)、镍铁铬钼铜氮低碳合金(UNS N08925,UNS N08031和UNS N08926)和铬镍铁氮低 Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904) and Ni-Fe-Cr-Mo-Cu-N Low Carbon Alloys (UNS 08925, UNS N08031, and UNS N08925) Cr-Ni-Fe-N Low Carbon (UNS R20033)
ANSI/ASTM B663-1994 银钨硬质合金电触点材料规范 Specification for Silver-Tungsten Carbide Electrical Contact Material
ANSI/ASTM B669-1997 锻造及压模铸用锌铝合金铸锭规范 Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
ANSI/ASTM B670-1996 高温设备用沉淀硬化镍合金板材、薄板材及带材规范 Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
ANSI/ASTM B672-1996 稳定的镍铁铬钼铌合金棒材及线材规范 Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
ANSI/ASTM B690-1996 铁镍铬钼合金(UNS N08366 and UNS No8367)无缝管规范 Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS No8367) Seamless Pipe and Tube
ANSI/ASTM B691-1996 铁镍铬钼合金(UNS N08366 And UNS N08367)条材、棒材及线材规范 Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 And UNS N08367) Rod, Bar, and Wire
ANSI/ASTM B704-2000 UNS NO6625和UNS NO8825合金焊管规范 Specification for Welded UNS N06625 and UNS N08825 Alloy Tubes
ANSI/ASTM B705-2000 镍合金焊接管规范 Specification for Nickel-Alloy (UNS N06625 and N08825) Welded Pipe
ANSI/ASTM B709-1998 铁镍铬钼合金(UNS No8028)板材、薄板和带材 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS No8028) Plate, Sheet, and Strip
ANSI/ASTM B710-1999 镍铁铬硅合金焊接管规范 Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe
ANSI/ASTM B719-2000 镍铬钼钴钨铁硅合金(UNS N06333)棒材规范 Specification for Nickel-Chromium-Molybdenum-Cobalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
ANSI/ASTM B722-1995 镍铬钼钴钨铁硅合金(UNS N06333)无缝管规范 Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
ANSI/ASTM B725-1996 焊接镍(UNS N02200/UNS No2201)和镍铜合金(UNS N04400)管规范 Specification for Welded Nickel (UNS N02200/UNS No2201) and Nickel-Copper Alloy (UNS N04400) Pipe
ANSI/ASTM B726-1996 镍铬钼钴钨铁硅合金 (UNS N06333)焊管规范 Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
ANSI/ASTM B730-1996 焊接镍和镍铜合金管(UNS N04400)规范 Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
ANSI/ASTM B739-1998 钼铁铬硅合金焊管规范 Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
ANSI/ASTM B749-1996 铅和铅合金带材、薄板材和板材产品规范 Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
ANSI/ASTM B750-1999 热浸涂层锌5%铝混合稀土合金(UNS Z38510)铸锭规范 Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings
ANSI/ASTM B751-1999 镍和镍合金无缝和焊管规范 Specification for General Requirements for Nickel and Nickel Alloy Seamless and Welded Tube
ANSI/ASTM B753-2001 恒温组份合金规范 Specification for Thermostat Component Alloys
ANSI/ASTM B76-2001 电加热用镍铬和镍铬铁合金加速寿命试验方法 Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ANSI/ASTM B77-2001 电阻合金的热电动力试验方法 Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ANSI/ASTM B775-2000 镍和镍合金无缝和焊管规范 Specification for General Requirements for Nickel and Nickel Alloy Seamless and Welded Pipe
ANSI/ASTM B78-2001 铁镍铝合金电加热加速寿命试验方法 Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ANSI/ASTM B791-1997 锌铝合金铸造和压模铸件规范 Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings
ANSI/ASTM B792-2001 空壳铸造铸锭锌合金规范 Specification for Zinc Alloys in Ingot Form for Slush Casting
ANSI/ASTM B793-2001 塑料注模和压模铸造锌铸造合金锭规范 Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ANSI/ASTM B805-1996 UNS N07716、N07725和N09777沉淀硬化镍合金钢棒和钢丝规范 Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725 and N09777 Bar and Wire
ANSI/ASTM B814-1996 镍铬铁钼钨合金板材、薄板材和带材规范 Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
ANSI/ASTM B815-1996 钴铬镍钼钨合金杆规范 Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
ANSI/ASTM B818-1998 钴铬镍钼钨合金(UNS R31233)板,薄板和带材规范 Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
ANSI/ASTM B829-1999 镍和镍合金无缝管一般要求规范 Specification for General Requirements for Nickel And Nickel Alloy Seamless Pipe and Tube
ANSI/ASTM B834-1996 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件规范 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
ANSI/ASTM B84-2001 精密电阻器合金电阻丝耐温常数测试方法 Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ANSI/ASTM B852-2001 薄钢板连续热浸镀锌用锌合金规范 Specification for Zinc Alloys (Cgg) for Continuous Hot-Dip Galvanizing of Sheet Steel
ANSI/ASTM B86-1998 锌合金压模铸件规范 Specification for Zinc-Alloy Die Castings
ANSI/ASTM B860-2001 热浸镀锌用锌母合金规范 Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
ANSI/ASTM B865-1996 沉淀硬化镍铜铝合金(UNS N05500)棒材、杆材、线材、锻件和锻坯规范 Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ANSI/ASTM B872-1996 沉淀硬化镍铁铬钴(Nb)钛铝合金(UNS N09908)板、薄板及带材规范 Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip
ANSI/ASTM B880-1998 镍、镍合金及钴合金化学检验分析限值一般要求规范 Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
ANSI/ASTM B894-1999 锌铜铝合金压模铸件规范 Specification for Zinc-Copper-Aluminum Alloy Die Castings
ANSI/ASTM B897-1999 锌及锌合金特大铸锭规范 Specification for Zinc and Zinc Alloy Jumbo Ingot
ANSI/ASTM B899-2001 有色金属和合金术语 Terminology Relating to Non-Ferrous Metals and Alloys
ANSI/ASTM B906-2000 平轧镍和镍合金板材、薄板材和带材的一般要求规范 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet and Strip
ANSI/ASTM B908-2000 锌合金铸锭色码使用惯例 Practice for Use of Color Codes for Zinc Casting Alloy Ingot
ANSI/ASTM B914-2000 钢热浸镀锌用锌和锌合金铸锭颜色编码惯例 Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
ANSI/ASTM D3115-1995 在高剪切力作用下润滑剂对宇航合金的爆炸反应性的试验方法(05.02) Explosive Reactivity of Lubricants with Aerospace Alloys under High Shear, Method of Test for (05.02)
ANSI/ASTM D4340-1998 排热条件下发动机冷却剂铸造铝合金腐蚀性测试方法 Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions
ANSI/ASTM E1450-1992 液态氦中结构合金的抗拉强度测试方法 Test Method for Tension Testing of Structural Alloys in Liquid Helium
ANSI/ASTM E2250-2002 水可混合金属加工液中内毒素浓度测定 Determination of Endotoxin Concentration in Water-Miscible Metalworking Fluids
ANSI/ASTM E866-1996 黏结在蜂窝结构防护板上的铝合金防腐粘结底层胶粘材料规范 Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels (04.11)
ANSI/ASTM F1182-1997 阳极镀锌合金规范 Specification for Anodes, Sacrificial Zinc Alloy
ANSI/ASTM F1545-1996 带塑料内衬的铁合金管、配件和法兰规范 Specification for Plastic-Lined Ferrous Metal Pipe, Fittings and Flanges
ANSI/AWS A5.10-1992 无药皮铝和铝合金焊条和焊棒规范 Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods, Specification for
ANSI/AWS A5.10/A 5.10M-1999 裸铝和铝合金焊接电极和焊条规范 Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
ANSI/AWS A5.11-97/A 5.11M-2005 气体保护金属极电弧焊用镍和镍合金电焊条规范 Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding, Specification for
ANSI/AWS A5.12/A 5.12M-1998 电弧焊接和切割用钨及钨合金焊条 Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
ANSI/AWS A5.14/A 5.14M-2005 镍和镍合金裸焊条和焊棒规范 Specification for Nickel and Nickel-Alloy Bare Welding Rods and Electrodes
ANSI/AWS A5.16/A 5.16M-2007 钛和钛合金电焊条和焊条规范 Specification for Titanium and Titanium Alloy Welding Electrodes and Rods
ANSI/AWS A5.19-1992 镁合金焊条和焊棒 Magnesium Alloy Welding Electrodes and Rods
ANSI/AWS A5.2/A 5.2M-2007 氧燃料气焊接的碳钢和低合金钢棒材的规范 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
ANSI/AWS A5.23/A 5.23M-2007 埋弧焊用低合金钢电极和助熔剂规范 Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
ANSI/AWS A5.24/A 5.24M-2004 锆和锆合金焊接电极和焊条规范 Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods
ANSI/AWS A5.25/A.25M-1997 碳钢和高强度低合金钢电渣焊用自耗品规范 Specification for Consumables Used for Electroslag Welding of Carbon and High-Strength Low-Alloy Steels
ANSI/AWS A5.26/A 5.26M-1997 碳钢和高强度低合金钢气电焊用自耗品规范 Specification for Consumables Used for Electrogas Welding of Carbon and High-Strength Low-Alloy Steels
ANSI/AWS A5.28/A 5.28M-2005 气体保护电弧焊用低合金钢焊条和焊棒 Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
ANSI/AWS A5.29/A 5.29M-2005 熔剂芯电弧焊用低合金钢焊条的规范 Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
ANSI/AWS A5.3-1991 保护金属电弧焊用铝和铝合金电极 Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.3/A 5.3M-1999 保护金属电弧焊用铝和铝合金电极 Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.34/A 5.34M-2007 助熔剂芯电弧焊接用镍合金电极的规范 Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding
ANSI/AWS A5.5/A 5.5M-2006 屏蔽金属电弧焊用低合金钢电焊条的规范 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.7/A 5.7M-2007 铜和铜合金裸焊条和电焊条规范 Copper and Copper-Alloy Bare Welding Rods, and Electrodes, Specification for
ANSI/AWS C1.4M/C 1.4-2000 碳钢和低合金钢电阻焊规范 Specification for Resistance Welding of Carbon and Low-alloy Steels
ANSI/AWS C2.18-1993 铝、锌及其合金和复合物的带有热喷覆层的钢的保护 Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites
ANSI/AWS C2.23/C 2.23M-2003 铝、锌及其合金的热喷镀层(金属化处理)和钢防腐蚀保护复合材料的应用规范 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
ANSI/AWS D10.7-1986 铝和铝合金管气体保护电弧焊推荐惯例 Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe, Recommended Practices for
ANSI/AWS D10.7M/D 10.7-2000 铝和铝合金管气体保护电弧焊推荐规程 Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe, Recommended Practices for
ANSI/AWS G2.1M/G 2.1-2002 锻造镍基合金指南 Guide for the Joining of Wrought Nickel-Base Alloys
ANSI/AWS G2.4/G 2.4M-2006 钛和钛合金熔焊指南 Guide for the Fusion Welding of Titanium and Titanium Alloys
ANSI/CSA LC4-2007 用于燃气配送系统的压接铜和铜合金配件 Press-Connect Copper and Copper Alloy Fittings for Use in Fuel Gas Distribution Systems (same as CSA 6.32)
ANSI/IPC/EIA J-STD-006A-2002 电子钎焊用电子级钎料合金及助熔和非助熔固体钎料的要求 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications
ANSI/SAE J1268-1993 碳素钢和合金工字钢的可淬透性带 Hardenability Bands for Carbon and Alloy H Steels
ANSI/SAE J404-1994 SAE合金钢的化学成分 Chemical Compositions of SAE Alloy Steels
ASME B16.18-2001 铸铜合金软钎焊连接压力管件 (Cast copper alloy solder joint pressure fittings)
ASME B16.22-2001 锻铜和铜合金钎焊压力配件 (Wrought copper and copper alloy solder joint pressure fittings)
ASME B16.23-2002 DWV类铸铜合金钎焊连接排水管件 (Cast copper alloy solder joint drainage fittings: DWV)
ASME B16.24-2001 150、300、400、600、900、1500和2500 类铸铜合金管法兰和法兰配件 (Cast copper alloy pipe flanges and flanged fittings: Classes 150, 300, 400, 600, 900, 1500, and 2500)
ASME B16.26-1988 青铜扩口管用铸铜合金配件 (Cast copper alloy fittings for flared copper tubes)
ASME B16.29-2001 DWV类可锻铜和可锻铜合金钎焊连接排水管接头 (Wrought copper and wrought copper alloy solder joint drainage fittings - DWV)
ASME B16.50-2001 锻造铜及铜合金硬焊结合压力配件 (Wrought copper and copper alloy braze-joint pressure fittings)
ASME B31.3 Cases NO. 2-1993 压力管道用套管规程.套管141:在ANSI/ASME B 31.3管道标准中铝合金法兰的使用规则 (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping)
ASTM A 1000-2005 特制弹簧级碳钢及合金钢丝标准规范 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
ASTM A 1002-1999 镍铝有序合金铸件的标准规范 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
ASTM A 1008/A 1008Ma-2007 固溶淬火和烧固淬火的冷轧、碳钢、结构钢、高强度低合金钢、可加工性改善的高强度低合金钢薄板材的标准规范 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A 1011/A 1011M-2007 热轧、碳钢、结构钢、高强度低合金钢、可加工性改善的高强度低合金钢和超高强度钢薄板材和带材的标准规范 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A 1012-2002 无缝和焊接铁素体、奥氏体和双合金钢冷凝器和带整体散热片的热交换器管的标准规范 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
ASTM A 1016/A 1016Ma-2004 铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ASTM A 1017/A 1017M-2007 铬钼钨合金钢压力容器板材的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
ASTM A 1018/A 1018M-2007 热轧、碳素钢、商品钢、拉制钢、结构钢、高强度低合金钢、可加工性改善的高强度低合金钢和超高强度钢薄板材 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A 102-2004 钒铁合金的标准规范 Standard Specification for Ferrovanadium
ASTM A 1025-2005 铁合金一般要求的标准规范 Standard Specification for Ferroalloys, General Requirements
ASTM A 1031-2005 热轧合金钢、拉制钢和结构钢薄板和带材、特厚卷材的标准规范 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
ASTM A 1033-2004 亚共析碳钢和低合金钢相位变换的定量测量和报告的标准规程 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
ASTM A 1040-2007 规范锻造碳素钢、低合金钢、合金钢统一的标准等级组分的标准指南 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
ASTM A 1041/A 1041M-2004 较高强度铬-钼-钨合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
ASTM A 1046/A 1046M-2006 用热浸工艺测定锌铝镁合金涂覆的薄钢板的标准规范 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A 1048/A 1048M-2006 高温工作的高强度铬钼钨合金钢压力容器锻件的标准规范 Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
ASTM A 108-2007 冷加工碳素钢和合金钢棒材的标准规范 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A 132-2004 钼铁合金标准规范 Standard Specification for Ferromolybdenum
ASTM A 144-2004 钨铁合金规范 Specification for Ferrotungsten
ASTM A 182/A 182Ma-2007 高温设备用锻制或轧制合金和不锈钢管法兰、锻制配件、阀门及零件的标准规范 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 193/A 193M-2007 高温或高压设备及其他特殊用途的合金钢和不锈钢螺栓连接材料用标准规范 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A 194/A 194Ma-2007 高压或高温设备或高压高温设备的螺栓用碳素钢与合金钢螺母的标准规范 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A 203/A 203M-1997 压力容器用镍合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
ASTM A 204/A 204M-2003 压力容器用钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
ASTM A 209/A 209M-2003 锅炉和过热器用无缝碳钼合金钢管标准规范 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
ASTM A 213/A 213Ma-2007 无缝铁素体和奥氏体合金钢锅炉、过热器和热交换器管的标准规范 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A 217/A 217M-2007 适合高温设备的承压部件用合金钢和马氏体不锈钢铸件的标准规范 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM A 225/A 225M-2003 压力容器用锰钒镍合金钢板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
ASTM A 231/A 231M-2004 铬钒合金钢弹簧丝的标准规范 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
ASTM A 232/A 232M-2005 阀簧级铬矾合金钢的标准规范 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM A 234/A 234M-2007 中温与高温设备用锻制碳素钢和合金钢管道配件的标准规范 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A 242/A 242M-2004 高强度低合金结构钢标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A 250/A 250M-2005 电阻焊接铁素体合金钢锅炉和过热器管的标准规范 Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
ASTM A 288-1991 涡轮发电机磁性定位环用碳素钢和合金钢锻件 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A 289/A 289M-1997 发电机用无磁档圈用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM A 29/A 29M-2005 热锻碳素钢棒和合金钢棒一般要求的标准规范 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
ASTM A 290/A 290M-2005 减速齿轮用碳素钢及合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
ASTM A 291/A 291M-2005 小齿轮、齿轮和减速齿轮轴用碳素钢和合金钢锻件的标准规范 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
ASTM A 302/A 302M-2003 压力容器用锰钼和锰钼镍合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 304-2005 有顶端淬火硬性要求的碳钢及合金钢棒材的标准规范 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
ASTM A 308/A 308M-2006 经热浸工艺涂层的镀铅锡(铅锡合金)铁薄板标准规范 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
ASTM A 320/A 320Ma-2007 低温设备用合金钢和不锈钢螺栓材料的标准规范 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
ASTM A 322-2007 标准级合金钢棒材的标准规范 Standard Specification for Steel Bars, Alloy, Standard Grades
ASTM A 324-1973 钛铁合金 Standard Specification for Ferrotitanium
ASTM A 334/A 334Ma-2004 低温设备用无缝和焊接碳素和合金钢管的标准规范 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
ASTM A 335/A 335M-2006 高温设备用无缝铁素体合金钢管的标准规范 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM A 336/A 336M-2007 压力和高温部件用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM A 350/A 350Ma-2004 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A 350/A 350Mc-2000 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A 353/A 353M-2004 压力容器用经二次正火及回火处理的含9％镍的合金钢板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
ASTM A 354-2007 淬火和回火合金钢螺栓、螺柱和其它外螺纹紧固件的标准规范 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A 355-1989 掺氮用合金钢棒 Standard Specification for Steel Bars, Alloys, for Nitriding
ASTM A 356/A 356M-2007 汽轮机用厚壁不锈钢、低合金钢、碳素钢和钢铸件标准规范 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
ASTM A 369/A 369M-2006 高温设备用锻制和镗加工碳素钢管和铁素体合金钢管标准规范 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
ASTM A 372/A 372M-2003 薄壁压力容器用碳钢和合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
ASTM A 387/A 387Ma-2006 压力容器用铬钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
ASTM A 391/A 391M-2001 80度(角度)合金钢链条标准规范 Standard Specification for Grade 80 Alloy Steel Chain
ASTM A 401/A 401M-2003 铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Chromium-Silicon Alloy
ASTM A 420/A 420M-2007 低温设备用锻造碳钢和合金钢的管道配件用标准规范 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A 423/A 423M-1995 无缝和电焊低合金钢管的标准规范 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
ASTM A 426/A 426M-2007 高温设备用离心浇铸铁素体合金钢管的标准规范 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
ASTM A 427-2002 冷轧和热轧用可锻合金钢轧辊标准规范 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
ASTM A 434-2006 热锻或冷精轧经淬火及回火的合金钢棒标准规范 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
ASTM A 437/A 437M-2006 高温用经特殊处理的渦轮型合金钢螺栓材料标准规范 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
ASTM A 447/A 447M-1993 高温用镍铬铁合金钢铸件(25-12级)的标准规范 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
ASTM A 450/A 450Ma-2004 碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ASTM A 470/A 470M-2005 涡轮转子和轴用经真空处理的碳素钢和合金钢锻件的标准规范 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM A 471-2006 涡轮转子盘和叶轮用真空处理合金钢锻件的标准规范 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
ASTM A 482-2005 铬铁合金硅的标准规范 Standard Specification for Ferrochrome-Silicon
ASTM A 483-2004 硅锰合金标准规范 Standard Specification for Silicomanganese
ASTM A 49-2001 热处理碳素钢连接棒材、微合金连接棒材和法兰连接棒材的标准规范 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
ASTM A 490-2006 最小抗拉强度为150ksi的热处理合金钢结构螺栓标准规范 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM A 494/A 494M-2007 镍和镍合金铸件的标准规范 Standard Specification for Castings, Nickel and Nickel Alloy
ASTM A 495-2006 硅钙合金的标准规范 Standard Specification for Calcium-Silicon Alloys
ASTM A 505-2000 热轧和冷轧合金钢薄板与带材一般要求的标准规范 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A 506-2005 热轧和冷轧合金钢和结构合金钢薄板材与带材的标准规范 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
ASTM A 507-2006 热轧和冷轧拉丝合金钢片材和带材的标准规范 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
ASTM A 508/A 508Mb-2005 压力容器用经淬火和回火真空处理的碳素钢与合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
ASTM A 513-2007 电阻焊碳素钢与合金钢机械钢管的标准规范 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
ASTM A 514/A 514M-2005 焊接用经淬火与回火的高屈服强度合金钢板的标准规范 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
ASTM A 517/A 517M-2006 压力容器用经回火与淬火的高强度合金钢板 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
ASTM A 519-2006 无缝碳钢和合金钢机械装管用标准规范 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A 522/A 522M-2007 低温设备用锻制或轧制含镍8%和9%的合金钢法兰、配件、阀门和零件的标准规范 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A 530/A 530Ma-2004 专用碳素钢和合金钢管一般要求的标准规范 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A 533/A 533M-1993 压力容器用经回火和淬火的锰钼及锰钼镍合金钢板 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 540/A 540M-2006 特殊用合金钢螺栓材料的标准规范 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
ASTM A 541/A 541M-2005 压力容器部件用经淬火和回火的碳素钢及合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
ASTM A 542/A 542M-1999 压力容器用经回火和淬火的铬钼、铬钼钒及铬钼钒钛硼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
ASTM A 543/A 543M-1993 压力容器用经回火和淬火的镍铬钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
ASTM A 550-2006 铌铁合金的标准规范 Standard Specification for Ferrocolumbium
ASTM A 553/A 553M-2006 压力容器用经淬火和回火的含8%和9%镍的合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
ASTM A 560/A 560M-2005 铬镍合金铸件的标准规范 Standard Specification for Castings, Chromium-Nickel Alloy
ASTM A 562/A 562M-2006 玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A 563-2007 碳和合金钢螺母标准规范 Standard Specification for Carbons and Alloy Steel Nuts
ASTM A 563M-2006 碳素钢和合金钢螺母(米制)用标准规范 Standard Specification for Carbon and Alloy Steel Nuts (Metric)
ASTM A 568/A 568M-2007 高强度、低合金、热轧和冷轧碳素薄板钢一般要求的标准规范 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A 572/A 572M-2007 高强度低合金钶钒结构钢标准规范 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A 574-2004 合金钢内六角螺钉标准规范 Standard Specification for Alloy Steel Socket-Head Cap Screws
ASTM A 574M-2004 合金钢内六角螺钉(米制)标准规范 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
ASTM A 579/A 579Ma-2004 超强度合金钢锻件的标准规范 Standard Specification for Superstrength Alloy Steel Forgings
ASTM A 588/A 588M-2005 4英寸(100mm)厚、最小屈服点50ksi(345MPa)的高强度低合金结构钢标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
ASTM A 592/A 592M-2004 压力容器用经回火和淬火的高强度低合金钢锻制配件和零件标准规范 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
ASTM A 595/A 595M-2006 建筑用锥形、高强度低合金或低碳钢管的标准规范 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
ASTM A 606-2004 改进防大气腐蚀性的热轧和冷轧高强度低合金钢薄板和带材的标准规范 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
ASTM A 608/A 608M-2006 高温压力设备用离心铸造的铁铬镍高合金钢管标准规范 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
ASTM A 609/A 609M-1991 碳素钢,低合金钢和马氏体不锈钢铸件及其超声波检验 Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof
ASTM A 610-1979 尺寸测量用铁合金的取样和试验的标准试验方法 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM A 618/A 618M-2004 热塑焊接和无缝高强度低合金结构钢管的标准规范 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
ASTM A 633/A 633M-2001 正火的高强度低合金结构钢板标准规范 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM A 635/A 635M-2007 高强度低合金和可加工性改善的高强度低合金热轧碳素结构薄板钢、带钢和重型粗卷钢一般要求的标准规范 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A 638/A 638M-2000 高温设备用沉积硬化铁基超级合金棒、锻件及锻坯料标准规范 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
ASTM A 645/A 645M-2005 经特殊热处理的5%镍合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
ASTM A 646/A 646M-2006 航行器和航空器锻件用优质合金钢大方坯和坯段的标准规范 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
ASTM A 653/A 653M-2007 用热浸处理镀锌或镀锌铁合金钢薄板的标准规范 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A 656/A 656M-2005 具有改良可模锻性的热轧结构钢制高强度低合金板标准规范 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
ASTM A 668/A 668M-2004 一般工业用碳素钢和合金钢锻件的标准规范 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ASTM A 678/A 678M-2005 淬火和回火的碳素钢和高强度低合金结构钢板的标准规范 Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
ASTM A 681-2007 工具钢合金的标准规范 Standard Specification for Tool Steels Alloy
ASTM A 689-1997 弹簧用碳素钢及合金钢棒的标准规范 Standard Specification for Carbon and Alloy Steel Bars for Springs
ASTM A 690/A 690M-2007 在海洋环境中使用耐大气腐蚀的高强度低镍铜合金工字形磷钢桩和薄板磷钢桩用标准规范 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
ASTM A 691-1998 高温下高压装置用电熔焊碳素钢和合金钢管的标准规范 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM A 694/A 694M-2003 高压传输设备用管法兰、配件、阀门及零件用碳素钢及合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM A 706/A 706Ma-2006 混凝土加筋用低合金异形钢筋和无节钢筋的标准规范 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
ASTM A 707/A 707M-2002 低温设备用锻制碳素钢和合金钢法兰的标准规范 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
ASTM A 710/A 710M-2002 沉淀硬化低碳镍-铜-铬-钼-铌合金结构钢板的标准规范 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
ASTM A 712-1997 软磁性合金电阻率的标准试验方法 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
ASTM A 714-1999 高强度低合金焊接和无缝钢管的标准规范 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
ASTM A 723/A 723M-2002 高强度压力元件用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
ASTM A 729/A 729M-2006 公共交通和电气铁路设施用热处理的合金钢轮轴的标准规范 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
ASTM A 732/A 732M-2005 一般用途熔模铸造碳钢和低合金钢及高温用高强度钴合金钢铸件标准规范 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM A 734/A 734Ma-1987 经淬火和回火的合金钢与高强度低合金钢压力容器板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
ASTM A 735/A 735M-2003 中温和低温压力容器用低碳锰钼钶合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
ASTM A 736/A 736M-2003 压力容器用低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
ASTM A 737/A 737M-1999 高强度低合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
ASTM A 739a-1990 高温或加压部件或高温加压部件用热轧合金钢棒标准规范 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
ASTM A 744/A 744M-2006 严酷条件下使用的耐腐蚀镍铬铁合金铸件的标准规范 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
ASTM A 749/A 749M-1997 热轧高强度碳素低合金钢带材的标准规范 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM A 752-2004 合金钢条和粗圆钢丝的标准规范 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
ASTM A 752M-2004 合金钢条和粗圆钢丝(米制)一般要求的标准规范 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
ASTM A 753-2002 煅制镍铁软磁合金标准规范 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
ASTM A 765/A 765M-2007 符合强制韧性要求的碳素钢和低合金钢压力容器部件锻件的标准规范 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
ASTM A 768/A 768M-2005 涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件的标准规范 Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM A 781/A 781M-2006 一般工业用钢铸件及合金铸件通用要求的标准规范 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A 782/A 782M-2006 经淬火和回火的锰铬钼硅锆合金钢压力容器板的标准规范 Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
ASTM A 786/A 786M-2005 热轧制碳素钢、低合金钢、高强度低合金钢及合金钢楼板的标准规范 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A 792/A 792Ma-2006 经热浸工艺涂层55%铝锌合金铁薄板材标准规范 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A 800/A 800M-2001 奥氏体合金钢铸件中铁素体含量估算的标准实施规程 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
ASTM A 801-2004 锻造铁-钴高磁饱和合金的标准规范 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
ASTM A 829/A 829M-2006 合金结构钢板的标准规范 Standard Specification for Alloy Structural Steel Plates
ASTM A 832/A 832M-2006 压力容器用铬钼钒合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
ASTM A 835-1984 铁合金与附加合金的尺寸的标准规范 Standard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM A 835/A 835M-1984 铁合金和合金添加剂尺寸的标准规范 Standard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM A 837/A 837M-2006 渗碳用合金钢锻件标准规范 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
ASTM A 838-2002 继电器用易切铁素体不锈软磁合金棒标准规范 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
ASTM A 844/A 844M-2004 压力容器用直接淬火加工的含镍9%的合金钢板标准规范 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
ASTM A 847/A 847M-2005 提高耐大气腐蚀性的冷成型焊接和无缝高强度低合金结构管道用标准规范 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
ASTM A 852/A 852M-2003 最小屈服强度为70ksi(485MPa)厚度为4英寸(100mm)的经淬火和回火的低合金结构钢板标准规范 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
ASTM A 855/A 855M-2003 锌-5%铝-铈合金涂覆钢丝绳的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
ASTM A 856/A 856M-2003 锌-5%铝-铈合金涂覆碳素钢丝的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM A 859/A 859M-2004 压力容器部件用时效硬化合金钢锻件的标准规范 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM A 860/A 860M-2000 锻制高强度低合金钢对缝焊接配件标准规范 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
ASTM A 871/A 871M-2003 耐大气腐蚀的高强度低合金结构钢板标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
ASTM A 873/A 873M-1987 压力容器用铬钼合金钢薄板和带材 Steel Sheet and Strip, Chromium-Molybdenum Alloy for Pressure Vessels
ASTM A 875/A 875M-2006 热浸处理的镀锌-5%铝合金的钢薄板用标准规范 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM A 877/A 877M-2005 阀簧级铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
ASTM A 878/A 878M-2005 阀簧级改进的铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
ASTM A 891/A 891M-2007 涡轮转子转盘和转轮用沉淀硬化铁基超耐热合金锻件的标准规范 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
ASTM A 90/A 90M-2007 带锌或锌合金涂层的钢铁制品上涂层重量(质量)用标准试验方法 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A 901-2003 半成品型非晶形磁芯合金的标准规范 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
ASTM A 906/A 906M-2002 悬挂式提升设备用等级 80 和 等级100 的合金钢链式吊索的标准规范 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
ASTM A 909/A 909M-2006 一般工业用微量合金钢锻件用标准规范 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
ASTM A 915/A 915M-1993 化学要求同锻件类似的碳素钢和合金钢的标准规范 Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
ASTM A 918-2006 要求标识各表面镀层重量的电解液工艺处理的涂覆锌-镍合金钢薄板材的标准规范 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A 920/A 920M-1997 具有机械特性,微合金,热锻,高质量钢棒的标准规范 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A 920/A 920Ma-2002 具有机械特性的微合金热锻高质量钢棒标准规范 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A 921/A 921M-1993 后热锻用微合金,高质量,热锻钢棒的标准规范 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
ASTM A 925-2003 地面架空线用锌-5%铝-铈合金涂覆钢绞线的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
ASTM A 940/A 940M-2006 差温热处理真空处理钢锻件、合金钢锻件的标准规范 Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
ASTM A 941a-2006 与钢、不锈钢、相关合金和铁合金相关的术语 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
ASTM A 945/A 945M-2006 改良可焊接性、可加工性及韧性用低碳限硫的高强度低合金结构钢板的标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
ASTM A 946-1995 耐腐蚀和耐热用铬,铬-镍和硅合金钢板,薄板和带的标准规范 Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
ASTM A 952/A 952M-2002 锻造等级 80 和等级100 的合金钢提升组件和焊接联接杆的标准规范 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
ASTM A 957/A 957M-2006 一般工业用共同要求的熔模铸造钢和合金的标准规范 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A 958-2000 带拉伸要求,化学要求的类似于标准铸造等级的铸钢,碳和合金的标准规范 Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
ASTM A 968/A 968M-1996 耐腐蚀和耐热设备用铬、铬镍和硅合金钢棒及型材的标准规范 Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
ASTM A 973/A 973M-2000 100级合金钢链的标准规范 Standard Specification for Grade 100 Alloy Steel Chain
ASTM A 983/A 983M-2006 中速柴油机用连续晶粒流动锻造碳钢及合金钢曲轴的标准规范 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A 989/A 989M-2007 高温设备用热等静压压制的合金钢法兰、配件、阀门和部件的标准规范 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A 99-2003 锰铁合金标准规范 Standard Specification for Ferromanganese
ASTM A 990-2006 防腐设备承压部件用特殊控制的铁镍铬及镍合金铸件的标准规范 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
ASTM A 994-2005 钢、不锈钢及相关合金产品规范的编辑程序和格式的标准指南 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM A 999/A 999Ma-2004 合金钢及不锈钢管一般要求的标准规范 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
ASTM B 100a-2003 桥梁和其它结构用锻制铜合金轴承和膨胀中厚板及薄板的标准规范 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
ASTM B 102-2000 铅和锡合金压模铸件的标准规范 Standard Specification for Lead- and Tin-Alloy Die Castings
ASTM B 105-2005 电导体用硬拉铜合金线标准规范 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
ASTM B 107/B 107M-2007 镁合金挤压棒材、杆材、型材、管材和线材用标准规范 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
ASTM B 108-2006 铝合金永久模型铸造件的标准规范 Standard Specification for Aluminum-Alloy Permanent Mold Castings
ASTM B 111/B 111M-2004 铜和铜合金无缝冷凝器管和孔塞坯料的标准规范 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
ASTM B 122/B 122M-2006 铜镍锡合金、铜镍锌合金(镍银)和铜镍合金板材、薄板材、带材及轧制棒材的标准规范 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 124/B 124M-2006 铜和铜合金锻造杆材、棒材和型材的标准规范 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
ASTM B 127-2005 镍铜合金(UNS N04400)板、薄板和带材的标准规范 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ASTM B 131-2007 铜合金弹头火帽壳的标准规范 Standard Specification for Copper Alloy Bullet Jacket Cups
ASTM B 151/B 151M-2005 铜镍锌合金(镍银)和铜镍杆材及棒材的标准规范 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
ASTM B 153-2005 铜和铜合金管膨胀(针试验)的标准试验方法 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
ASTM B 154-2005 铜合金的硝酸亚汞试验用标准试验方法 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM B 163-2004 无缝镍和镍合金冷凝器及热交换器管的标准规范 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM B 164-2003 镍铜合金杆材、棒材和线材标准规范 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
ASTM B 165-2005 无缝镍铜合金管标准规范(UNS N04400) Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
ASTM B 166-2006 镍铬铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和镍铬钴钼合金(UNS N06617)杆材 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
ASTM B 167-2006 镍-铬-铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和镍-铬-钴-钼合金(UNS N06617 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
ASTM B 168-2006 镍-铬-铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和镍-铬-钴-钼合金(UNS N06617 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
ASTM B 171/B 171M-2004 压力容器、冷凝器和热交换器用铜合金板材和薄板材的标准规范 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
ASTM B 176-2004 铜合金压模铸件标准规范 Standard Specification for Copper-Alloy Die Castings
ASTM B 179-2006 全铸造工艺的铸锭和熔融成形铸件中铝合金的标准规范 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
ASTM B 189-2005 电气用铅涂覆和铅合金涂覆软铜线的标准规范 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
ASTM B 19-2005 铜锌合金薄板材、带材、板材、棒材和圆盘的标准规范 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
ASTM B 194-1996 铜铍合金中厚板、薄板、带材和轧制棒材标准规范 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 196/B 196M-2007 铜铍合金杆材和棒材的标准规范 Standard Specification for Copper-Beryllium Alloy Rod and Bar
ASTM B 197/B 197M-2007 铜-铍合金线的标准规范 Standard Specification for Copper-Beryllium Alloy Wire
ASTM B 199-2007 镁合金永久铸模铸件用标准规范 Standard Specification for Magnesium-Alloy Permanent Mold Castings
ASTM B 200-1985 钢及铁合金表面铅和铅锡合金的电解沉积镀层标准规范 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
ASTM B 206/B 206M-2007 铜-镍-锌(镍银)合金线和铜-镍合金线用标准规范 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
ASTM B 208-2006 砂型铸造、硬模铸造、离心铸造和连续铸造铜合金铸件抗拉试验用试样制备的标准实施规范 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
ASTM B 209-2007 铝和铝合金薄板材和板材的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B 209M-2007 铝和铝合金薄板材和板材(米制)的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
ASTM B 210-2004 拉制无缝铝和铝合金管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM B 210M-2005 拉制铝和铝合金无缝管的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
ASTM B 211-2003 铝及铝合金棒材、条材和线材标准规范 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
ASTM B 211M-2003 铝及铝合金棒材、条材和线材(米制)标准规范 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
ASTM B 221-2006 铝和铝合金挤压棒材、杆材、金属丝、型材和管道的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B 221M-2007 铝和铝合金挤压棒材、杆材、线材、型材和管材用标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
ASTM B 23-2000 白色金属轴承合金(商品名称为"巴氏合金")的标准规范 Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
ASTM B 234-2004 冷凝器及热交换器用铝和铝合金拉制无缝管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
ASTM B 234M-2004 冷凝器及热交换器用铝和铝合金拉制无缝管的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
ASTM B 240-2007 铸造和压模铸件用铸锭结构中锌和锌铝(ZA)合金的标准规范 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM B 241/B 241M-2002 铝及铝合金无缝管和挤制管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM B 247a-2002 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM B 247Ma-2002 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
ASTM B 248-2007 锻制铜和铜合金厚板、薄板、带材及轧制棒材的一般要求的标准规范 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 248M-2007 锻制铜和铜合金厚板材、薄板材、带材及轧制棒材的一般要求的标准规范(米制) Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
ASTM B 249/B 249M-2006 锻制铜及铜合金棍材、棒材、型材和锻件一般要求的标准规范 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
ASTM B 250/B 250M-2007 可锻铜合金线一般要求的标准规范 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM B 251-2002 锻制无缝铜及铜合金管一般要求的标准规范 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
ASTM B 252-1992 电镀层和转化涂层用锌合金压模铸件的制备 Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
ASTM B 253-1987 电镀用铝合金的制备标准指南 Standard Guide for Preparation of Aluminum Alloys for Electroplating
ASTM B 26/B 26M-2005 铝合金砂型铸件标准规范 Standard Specification for Aluminum-Alloy Sand Castings
ASTM B 265b-2006 钛及钛合金带材、薄板及板材标准规范 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM B 271-2006 铜基合金离心浇铸件用标准规范 Standard Specification for Copper-Base Alloy Centrifugal Castings
ASTM B 275-2005 铸造和锻造某些有色金属和合金的标准实施规程汇编 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
ASTM B 276-2005 硬质合金表观孔隙率的标准试验方法 Standard Test Method for Apparent Porosity in Cemented Carbides
ASTM B 281-1988 电镀层和转化镀层用铜和铜基合金的制备 Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
ASTM B 283-2006 铜及铜合金压模锻件(热压)的标准规范 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
ASTM B 294-1992 硬质合金硬度的测试方法 Test Method for Hardness Testing of Cemented Carbides
ASTM B 296-2003 镁合金铸件和锻件回火名称与符号的标准实施规程 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
ASTM B 308/B 308M-2002 铝合金6061-T6标准结构型材标准规范 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
ASTM B 30a-2006 铜基合金锭的标准规范 Standard Specification for Copper Alloys in Ingot Form
ASTM B 313/B 313M-2002 铝和铝合金圆焊接管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
ASTM B 315-2006 无缝铜合金管和莞标准规范 Standard Specification for Seamless Copper Alloy Pipe and Tube
ASTM B 316/B 316M-2002 铆接和冷镦铝及铝合金线材与棒材标准规范 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM B 317/B 317M-2007 电气用铝和铝合金挤压棒材、杆材、管和结构型材的标准规范 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM B 319-1991 电镀用铅和铅合金的制备 Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
ASTM B 327-2001 制作锌压模合金用铝合金硬化剂标准规范 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
ASTM B 333-2003 镍钼合金板、薄板和带材标准规范 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
ASTM B 335-2003 镍钼合金杆材标准规范 Standard Specification for Nickel-Molybdenum Alloy Rod
ASTM B 338a-2006 冷凝器和热交换器用无缝和焊接钛与钛合金管的标准规范 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
ASTM B 344-2001 电加热元件用拉制或轧制镍铬及镍铬铁合金标准规范 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
ASTM B 345/B 345M-2002 气体和油传输和配送管道系统用铝及铝合金无缝管和无缝挤制管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
ASTM B 348a-2006 钛和钛合金棒材和坯锭的标准规范 Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM B 350/B 350M-2002 核工业用锆和锆合金铸锭的标准规范 Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
ASTM B 351-1997 核用热轧和冷加工锆及锆合金棒材、杆材和线材标准规范 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
ASTM B 351/B 351M-2007 核设备用热轧和冷加工锆和锆合金棒材、杆材和线材的标准规范 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
ASTM B 352-1997 核用锆及锆合金板、带材和板标准规范 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
ASTM B 352/B 352M-2002 核设备用锆和锆合金薄板,带和板材的标准规范 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
ASTM B 353-2007 核设施(核燃料覆层除外)用锻制锆及锆合金无缝与焊接管的标准规范 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
ASTM B 359/B 359M-2002 具有整体散热叶片的冷凝器及热交换器用无缝铜和铜合金管标准规范 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B 361-2002 工厂加工的锻制铝及铝合金焊接件的标准规范 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM B 363a-2006 无缝和焊接的非合金钛及钛合金焊接配件标准规范 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
ASTM B 364-1996 钽及钽合金铸锭标准规范 Standard Specification for Tantalum and Tantalum Alloy Ingots
ASTM B 365-1998 钽及钽合金杆材和线材标准规范 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
ASTM B 366b-2004 工厂制锻造镍和镍合金配件的标准规范 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ASTM B 367-2006 钛和钛合金铸件的标准规范 Standard Specification for Titanium and Titanium Alloy Castings
ASTM B 369-2006 铜-镍合金铸件标准规范 Standard Specification for Copper-Nickel Alloy Castings
ASTM B 371/B 371M-2006 铜-锌-硅合金杆材的标准规范 Standard Specification for Copper-Zinc-Silicon Alloy Rod
ASTM B 372-1997 无缝铜及铜合金矩形波导管标准规范 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
ASTM B 381a-2006 钛和钛合金锻件的标准规范 Standard Specification for Titanium and Titanium Alloy Forgings
ASTM B 386-2003 钼和钼合金板、薄板、带材和箔的标准规范 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
ASTM B 387-1990 钼及钼合金棒、条和线材 Molybdenum and Molybdenum Alloy Bar, Rod and Wire
ASTM B 390-1992 钨硬质合金表观晶粒尺寸及其分布的评定 Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
ASTM B 392-2003 铌和铌合金棒材、杆材及线材标准规范 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
ASTM B 393-2005 铌和铌合金带材、薄板及板材的标准规范 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
ASTM B 394-2003 铌和铌合金无缝及焊接管标准规范 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
ASTM B 395/B 395M-2002 U型弯曲无缝铜和铜合金热交换器和冷凝器管的标准规范 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
ASTM B 398/B 398M-2002 电气用铝合金6201-T81线的标准规范 Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
ASTM B 399/B 399M-2004 同心绞捻的铝合金6201-T81导线标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
ASTM B 403-2007 镁合金熔模铸件的标准规范 Standard Specification for Magnesium-Alloy Investment Castings
ASTM B 406-1996 硬质合金横向断裂强度的标准试验方法 Standard Test Method for Transverse Rupture Strength of Cemented Carbides
ASTM B 407-2004 镍铁铬合金无缝管的标准规范 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASTM B 408-2006 镍铁铬合金杆材和棒材用标准规范 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
ASTM B 409-2006 镍铁铬合金厚板材、薄板材和带材用标准规范 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ASTM B 411-1996 铜镍硅合金杆材和棒材标准规范 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
ASTM B 411/B 411M-2006 铜-镍-硅合金杆材和棒材标准规范 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
ASTM B 412-1995 铜镍硅合金丝标准规范 Standard Specification for Copper-Nickel-Silicon Alloy Wire
ASTM B 422-2006 铜-铝-硅-钴合金、铜-镍-硅-镁合金、铜-镍-硅合金、铜-镍-铝-镁合金和铜-镍-锡合金薄板材和带材的标准规范 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
ASTM B 423-2005 镍铁铬钼铜合金无缝管道标准规范(UNS N08825 and N08221) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
ASTM B 424-2005 镍铁铬钼铜合金(UNS N08825和UNS N08221)板材、薄板及带材的标准规范 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
ASTM B 425-1999 镍铁铬钼铜合金(UNS N08825和UNS N08221)杆材和棒材标准规范 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
ASTM B 427-2002 齿轮用青铜合金铸件标准规范 Standard Specification for Gear Bronze Alloy Castings
ASTM B 428-1993 矩形和正方形铜和铜合金管扭转角的标准试验方法 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
ASTM B 429/B 429M-2006 挤压型铝合金管和管道的标准规范 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM B 432-2004 包铜及包铜合金钢板的标准规范 Standard Specification for Copper and Copper Alloy Clad Steel Plate
ASTM B 434-2006 镍钼铬铁合金(UNS N10003、UNS N10242)厚板材、薄板材和带材用标准规范 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
ASTM B 443-2000 镍铬钼铌合金(UNS N06625)和镍铬钼硅合金(UNS N06219)板、薄板和带材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
ASTM B 444-2006 镍铬钼铌合金(UNS N06625和UNS N06852)和镍铬钼硅合金(UNS N06219)管道和管用标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
ASTM B 446-2003 镍铬钼铌合金(UNS N06625)、镍铬钼硅合金(UNS N06219)和镍铬钼钨合金(UNS N06650)杆材和棒材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
ASTM B 453/B 453M-2005 铜锌铅合金(含铅青铜)杆材、棒材和型材的标准规范 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
ASTM B 455-2005 铜锌铅合金(加铅黄铜)挤压型材的标准规范 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B 462-2006 腐蚀性锻制或轧制的UNS N06030、N06022、N06035、N06200、N06059、N06686、N08020、N08024、N08026、N08367 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
ASTM B 463-2004 UNS N08020、UNS N08026和UNS N08024合金板、薄板和带材标准规范 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
ASTM B 464-2005 焊接的UNS NO8020、NO8024和NO8026合金管的标准规范 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
ASTM B 465-2004 铜铁合金板、薄板、带材和轧制棒材标准规范 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 466-1998 无缝铜镍合金管 Seamless Copper-Nickel Pipe and Tube
ASTM B 468-2004 焊接的UNS N08020、N08024和N08026合金管标准规范 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
ASTM B 469-1994 压力设备用无缝铜合金管 Seamless Copper Alloy Tubes for Pressure Applications
ASTM B 471-1993 UNS NO8020、UNS NO8026和UNS NO8024镍合金弹簧丝 UNS N08020, UNS N08026 and UNS N08024 Nickel Alloy Spring Wire
ASTM B 472a-2004 镍合金坯锭和再锻用棒材的标准规范 Standard Specification for Nickel Alloy Billets and Bars for Reforging
ASTM B 473-2007 UNS N08020、UNS N08024和UNS N08026镍合金棒材和线材的标准规范 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
ASTM B 475-2007 UNS N08020、UNS N08024和UNS N08026镍合金圆编织线的标准规范 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
ASTM B 477-1997 金银镍电触点合金标准规范 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
ASTM B 479-2006 与食品接触的和其它用途的挠性包装材料用退火铝及铝合金箔标准规范 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM B 480-1988 电镀用镁和镁合金制备的标准指南 Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
ASTM B 481-1968 电镀用钛和钛合金的制备 Preparation of Titanium and Titanium Alloys for Electroplating
ASTM B 482-1985 电镀用钨和钨合金的制备 Preparation of Tungsten and Tungsten Alloys for Electroplating
ASTM B 483-1995 普通拉制铝及铝合金管 Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
ASTM B 483/B 483M-2003 通用铝和铝合金拉制管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
ASTM B 491/B 491M-2006 通用铝和铝合金挤制圆管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM B 493-1983 锆及锆合金锻件 Zirconium and Zirconium Alloy Forgings
ASTM B 495-2005 锆及锆合金铸锭的标准规范 Standard Specification for Zirconium and Zirconium Alloy Ingots
ASTM B 505/B 505M-2007 铜合金连续浇铸件的标准规范 Standard Specification for Copper Alloy Continuous Castings
ASTM B 511-2001 镍铁铬硅合金棒和型材标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
ASTM B 512-2004 镍铬硅合金坯料和棒材标准规范 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
ASTM B 514-2005 焊接的镍铁铬合金管标准规范 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
ASTM B 515-1995 焊接的UNS N08120、UNS NO8800、UNS N08810和UNS NO8811合金管标准规范 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
ASTM B 516-2003 焊接的镍铬铁合金(UNS N06600、UNS N06603、UNS N06025和UNS N06045)管标准规范 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes)
ASTM B 517-2005 焊接镍铬铁合金(UNS N06600、UNS N06603、UNS N06025和UNS N06045)管的标准规范 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
ASTM B 521-1998 钽和钽合金无缝和焊接管标准规范 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
ASTM B 522-2001 金银铂电接触合金标准规范 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
ASTM B 523/B 523M-2007 无缝和焊接锆及锆合金管的标准规范 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
ASTM B 524/B 524M-1999 铝合金芯加强的同心绞捻铝导线标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
ASTM B 535-2006 镍铁铬硅合金(UNS N08330和N08332)无缝管道和管用标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
ASTM B 536-2007 镍-铁-铬-硅合金(UNS N08330和N08332)厚板材、薄板材和带材的标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
ASTM B 540-1997 电触点用钯合金标准规范 Standard Specification for Palladium Electrical Contact Alloy
ASTM B 541-2001 电接触用金合金标准规范 Standard Specification for Gold Electrical Contact Alloy
ASTM B 546-2004 电熔焊接镍铬钴钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330和UNS N08332)、镍铬铁铝合金(UNS N06603)、镍 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM B 547/B 547M-2002 成形的和电弧焊接的铝及铝合金圆管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
ASTM B 548-2003 压力容器用铝合金板的超声波检验的标准试验方法 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
ASTM B 550/B 550M-2007 锆和锆合金棒材及线材的标准规范 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
ASTM B 551/B 551M-2007 锆和锆合金带材、薄板材和厚板材的标准规范 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
ASTM B 557-2006 锻造和铸造的铝及镁合金制品的抗拉试验的标准试验方法 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM B 557M-2007 锻造和铸造铝合金和镁合金制品的抗拉测试的标准试验方法(米制) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
ASTM B 558-1979 电镀用镍合金的制备 Preparation of Nickel Alloys for Electroplating
ASTM B 560-2000 新的锡铅合金的标准规范 Standard Specification for Modern Pewter Alloys
ASTM B 563-2001 电接触用钯银铜合金标准规范 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
ASTM B 564a-2006 镍合金锻件用标准规范 Standard Specification for Nickel Alloy Forgings
ASTM B 565-2004 铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM B 570-2006 (UNS Nos. C17000和C17200)铜-铍合金锻件和挤压件的标准规范 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
ASTM B 573-2006 镍钼铬铁合金(UNS N10003、N10242)棒材标准规范 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
ASTM B 574-2006 低碳镍钼铬、低碳镍铬钼、低碳镍钼铬钽、低碳镍铬钼铜和低碳镍铬钼钨合金杆标准规范 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM B 575-2006 低碳镍铬钼、低碳镍铬钼铜、低碳镍铬钼钽和低碳镍铬钼钨合金板、薄板及带材的标准规范 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
ASTM B 579-1973 锡铅合金的电解沉积镀层(焊接板) Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
ASTM B 581-2002 镍铬铁钼铜合金棒标准规范 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ASTM B 582-2002 镍铬铁钼铜合金板、薄板及带材标准规范 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
ASTM B 584a-2006 一般用途铜合金砂型铸造件的标准规范 Standard Specification for Copper Alloy Sand Castings for General Applications
ASTM B 591-2004 铜锌锡和铜锌锡铁镍合金板、薄板、带材及轧制的棒材标准规范 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
ASTM B 592-2001 铜锌铝钴合金、铜锌锡铁板、薄板、带材及轧制的棒材标准规范 Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 593-1996 铜合金弹簧材料弯曲疲劳试验的标准试验方法 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B 594-2006 航空设备用铝合金锻制品超声波检验的标准实施规程 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM B 596-1989 金铜合金电接触材料标准规范 Standard Specification for Gold-Copper Alloy Electrical Contact Material
ASTM B 598-1998 抗拉试验中确定铜合金偏置屈服强度的标准实施规程 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
ASTM B 599-1992 镍铁铬钼钶稳定合金板、薄板及带材标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
ASTM B 600-1991 钛及钛合金表面的去垢和清洗 Descaling and Cleaning Titanium and Titanium Alloy Surfaces
ASTM B 601-2007 铜和铜合金用回火标志的标准分类.锻造和铸造 Standard Classification for Temper Designations for Copper and Copper Alloys - Wrought and Cast
ASTM B 603-2007 电热元件用拉制或轧制铁-铬-铝合金的标准规范 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ASTM B 605a-1995 锡镍合金电解沉积镀层标准规范 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
ASTM B 606-2002 钢芯铝和铝合金导线用高强度镀锌(电镀)钢芯线的标准规范 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM B 611-1985 硬质合金的耐磨性的试验方法 Test Method for Abrasive Wear Resistance of Cemented Carbides
ASTM B 614-2005 锆及锆合金表面的除垢和清洗的标准实施规程 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
ASTM B 617-1998 电触点货币银合金标准规范 Standard Specification for Coin Silver Electrical Contact Alloy
ASTM B 619-2006 焊接的镍和镍钴合金管的标准规范 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 620-2003 镍铁铬钼合金板、薄板及带材标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
ASTM B 621-2002 镍铁铬钼合金棒材标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
ASTM B 622-2006 无缝镍和镍钴合金管的标准规范 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ASTM B 624-2007 电子用高强度高传导率铜合金线的标准规范 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM B 626-2006 焊接镍和镍钴合金管标准规范 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
ASTM B 628-1998 银铜低共熔电触头合金标准规范 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
ASTM B 629-1977 电镀用钼和钼合金的制备 Preparation of Molybdenum and Molybdenum Alloys for Electroplating
ASTM B 632/B 632M-2002 铝合金轧制支撑板标准规范 Standard Specification for Aluminum-Alloy Rolled Tread Plate
ASTM B 637-2006 高温设备用淀积硬化镍合金棒材、锻件和锻坯的标准规范 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
ASTM B 639-2002 高温用沉积硬化钴(UNS R30155 和 UNS R30816)合金条材、棒材、锻件和锻造坯定的标准规范 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
ASTM B 643-2000 铜铍合金无缝管标准规范 Standard Specification for Copper-Beryllium Alloy Seamless Tube
ASTM B 644-2005 铜合金添加剂的标准规范 Standard Specification for Copper Alloy Addition Agents
ASTM B 645-2007 铝合金线性弹性平面应变断裂韧性测试的标准实施规程 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B 646a-2006 铝合金断裂韧性试验的标准实施规程 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B 647-1984 用维氏硬度仪测定铝合金压痕硬度的试验方法 Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B 648-1978 用巴氏压痕仪测定铝合金压痕硬度的标准试验方法 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B 649-2006 镍铁铬钼铜氮低碳合金(UNS N08925、UNS N08031、UNS N08354和UNS N08926)、铬镍铁氮低碳合金(UNS R20033)棒 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
ASTM B 652/B 652M-2004 铌铪合金铸锭标准规范 Standard Specification for Niobium-Hafnium Alloy Ingots
ASTM B 653/B 653M-2006 无缝和焊接锆和锆合金焊接配件的标准规范 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
ASTM B 654/B 654M-2004 铌铪合金箔、薄板材、带材和板材的标准规范 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
ASTM B 655/B 655M-2004 铌铪合金棒材、杆材和线材标准规范 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
ASTM B 657-2005 硬质合金中微观结构金相鉴定指南 Guide for Metallographic Identification of Microstructure in Cemented Carbides
ASTM B 658/B 658M-2006 无缝和焊接锆和锆合金管标准规范 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM B 661-2006 镁合金的热处理标准实施规范 Standard Practice for Heat Treatment of Magnesium Alloys
ASTM B 663-1994 银钨硬质合金电触点材料标准规范 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
ASTM B 670-2002 高温设备用沉淀淬火镍合金(UNS N07718) 厚板、薄板及带材的标准规范 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
ASTM B 672-2002 镍铁铬钼铌稳定合金(UNS N08700)棒材及线材的标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
ASTM B 690-2002 铁镍铬钼合金无缝管标准规范 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
ASTM B 691-2002 铁镍铬钼合金杆材、棒材及线材标准规范 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
ASTM B 694-2003 电缆护套用铜、铜合金、包铜青铜和包铜不锈钢薄板和带材标准规范 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
ASTM B 698-2002 无缝铜和铜合金管和管道的标准分类 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
ASTM B 704-2003 焊接UNS N06625、UNS N06219和UNS N08825合金管标准规范 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
ASTM B 705-2005 镍合金(UNS N06625、N06219和N08825)焊接管的标准规范 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
ASTM B 706-2000 无缝铜合金管标准规范 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
ASTM B 708-2005 钽和钽合金板、薄板和带材标准规范 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
ASTM B 709-2004 铁镍铬钼合金板、薄板和带材标准规范 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
ASTM B 710-2004 镍铁铬硅合金焊接管标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
ASTM B 711-2005 同心绞捻铝合金钢芯导线(AACSR)(6201)的标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
ASTM B 718-2000 镍铬钼钴钨铁硅合金板,薄板和带材的标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
ASTM B 719-2000 镍铬钼钴钨铁硅合金(UNS N06333)棒标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
ASTM B 722-2006 镍-铬-钼-钴-钨-铁硅合金(UNS N06333)无缝管道和管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
ASTM B 723-2000 镍铬钼钴钨铁硅合金焊接管的标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
ASTM B 724-2000 用新式轻便非卡尺型仪器测量铝合金压痕硬度的标准试验方法 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B 725-2005 镍(UNS N02200/UNS N02201)和镍合金(UNS N04400)焊接管的标准规范 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
ASTM B 726-2002 镍铬钼钴钨铁硅合金(UNS N06333)焊接管的标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
ASTM B 729-2005 无缝UNS N08020、UNS NO8026和UNS NO8024镍合金管的标准规范 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
ASTM B 736-2000 铝、铝合金和铝包层钢电缆屏蔽材料标准规范 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
ASTM B 739-2003 钼铁铬硅合金焊接管标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
ASTM B 740-2002 铜镍锡旋节合金带材的标准规范 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
ASTM B 744/B 744M-2005 波纹铝管用铝合金薄板的标准规范 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
ASTM B 746/B 746M-2002 现场栓接管、管拱和拱用波纹铝合金结构板的标准规范 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM B 749-2003 铅和铅合金带材、薄板和板材产品标准规范 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
ASTM B 750-2007 热浸涂层用锭铁模型中GALFAN(锌-5%铝-含铈稀土)合金的标准规范 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
ASTM B 751-2003 镍和镍合金焊接管一般要求的标准规范 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
ASTM B 753-2007 恒温器组件合金的标准规范 Standard Specification for Thermostat Component Alloys
ASTM B 754-1989 铜及铜合金带材平面偏差的测量和记录的测试方法 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM B 755-2000 镍铬钼钨合金板、薄板和带材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
ASTM B 756-2000 镍铬钼钨合金(UNS N06110)棒材和杆材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
ASTM B 757-2000 镍铬钼钨合金焊接管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
ASTM B 758-2000 镍铬钼钨合金焊接管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
ASTM B 759-2000 镍铬钼钨合金管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
ASTM B 76-1990 电加热用镍铬和镍铬铁合金的加速寿命的试验方法 Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ASTM B 763-2004 阀门用铜合金砂型铸件标准规范 Standard Specification for Copper Alloy Sand Castings for Valve Applications
ASTM B 768-1999 铜钴铍合金和铜镍铍合金带材和板材标准规范 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
ASTM B 769-2007 铝合金的剪切测试用标准试验方法 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B 77-2007 电阻合金的热电功率用标准试验方法 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ASTM B 770-2005 通用铜铍合金砂型铸件的标准规范 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
ASTM B 771-1987 硬质合金短杆断裂韧度的试验方法 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM B 774-2000 低熔点合金的标准规范 Standard Specification for Low Melting Point Alloys
ASTM B 775-2002 镍和镍合金焊接管一般要求的标准规范 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
ASTM B 776-2007 铪和铪合金带材、薄板材和厚板材的标准规范 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
ASTM B 78-1990 电加热用铁铬铝合金的加速寿命的试验方法 Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM B 780-1998 含银75%、铜24.5%及镍0.5%的电触点合金标准规范 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
ASTM B 792-2001 空壳铸造用铸模中的锌合金锭标准规范 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
ASTM B 793-2003 薄板金属成型压模和塑料注模用锌铸造合金锭标准规范 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B 795-1993 确定粉末锻钢部件中合金和非合金铁杂质百分比的标准试验方法 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts
ASTM B 796-2002 低合金粉末锻钢部件的非金属杂质含量的标准测试方法 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications
ASTM B 80-2007 镁合金沙铸件的标准规范 Standard Specification for Magnesium-Alloy Sand Castings
ASTM B 800-2005 电气用退火及中温回火8000系列铝合金线的标准规范 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B 802/B 802M-2002 钢芯铝导线(ASCR)用涂覆锌-5%铝-混合稀土合金钢芯线的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM B 803-2002 钢芯铝和铝合金导线用涂覆高强度锌-5%铝-混合稀土合金钢芯线的标准规范 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM B 805-2006 淀积硬化镍合金钢棒和钢丝的标准规范 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
ASTM B 806-2006 通用铜合金永久铸模铸件的标准规范 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
ASTM B 807/B 807M-2006 铝合金用挤压溶液热处理的标准实施规范 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
ASTM B 811-2002 核反应堆燃料包壳用锻制锆合金无缝管的标准规范 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
ASTM B 813-2000 铜和铜合金管钎焊用液体和软膏状助溶剂的标准规范 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
ASTM B 814-2006 镍-铬-铁-钼-钨合金(UNS N06920)厚板材、薄板材和带材标准规范 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
ASTM B 815-2002 钴铬镍钼钨合金杆标准规范 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
ASTM B 817-2003 粉末冶金(P/M)钛合金结构元件标准规范 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
ASTM B 818-2003 钴铬镍钼钨合金板、薄板和带材标准规范 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
ASTM B 820-2004 铜和铜合金带材可成型性测定用弯曲试验的标准试验方法 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM B 824-2004 铜合金铸件一般要求的标准规范 Standard Specification for General Requirements for Copper Alloy Castings
ASTM B 828-2002 用铜、铜合金管和配件钎焊制作毛细管接缝的标准实施规程 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
ASTM B 829a-2004 镍和镍合金无缝管的一般要求的标准规范 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM B 831-2005 薄铝合金制品剪切试验的标准试验方法 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B 833-2006 钢材防腐蚀用热喷镀(金属化)的锌和锌合金金属丝标准规范 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
ASTM B 834-1995 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件标准规范 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
ASTM B 84-2007 精密电阻器用合金丝温度电阻常数的标准试验方法 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ASTM B 840-1999 锌钴合金沉积物用电解镀层标准规范 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
ASTM B 841-1999 锌镍合金沉积物用电解镀层标准规范 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
ASTM B 842-1999 锌铁合金沉积物用电解镀层标准规范 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
ASTM B 843-2007 阴极保护用镁合金阳极的标准规范 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
ASTM B 846a-2006 铜和铜合金的标准术语 Standard Terminology for Copper and Copper Alloys
ASTM B 85-2003 铝合金压模铸件标准规范 Standard Specification for Aluminum-Alloy Die Castings
ASTM B 852-2007 薄钢板热浸镀锌用连续镀锌级(CGG)锌合金的标准规范 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
ASTM B 858-2006 用氨蒸气试验测定铜合金对应力腐蚀裂纹敏感度的标准试验方法 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
ASTM B 86-2006 锌及锌铝(ZA)合金铸件和压铸件的标准规范 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM B 860-2007 热浸镀锌用锌主合金的标准规范 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
ASTM B 861a-2006 钛和钛合金无缝钢管的标准规范 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
ASTM B 862b-2006 钛和钛合金焊接管道的标准规范 Standard Specification for Titanium and Titanium Alloy Welded Pipe
ASTM B 863a-2006 钛和钛合金丝的标准规范 Standard Specification for Titanium and Titanium Alloy Wire
ASTM B 865-2004 沉淀硬化镍铜铝合金(UNS N05500)棒材、杆材、线材、锻件和锻坯的标准规范 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ASTM B 870-2002 铜铍合金锻制和挤制合金的标准规范 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
ASTM B 871-2001 铝合金产品撕裂测试的标准试验方法 Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM B 872-2006 淀积硬化镍合金金属板、薄板和带材的标准规范 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
ASTM B 879-1997 镁和镁合金上非电解质转换涂层的标准规范 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
ASTM B 880-2003 镍、镍合金及钴合金的化学检验分析限值一般要求的标准规范 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys, and Cobalt Alloys
ASTM B 881-2005 铝和镁合金产品的相关标准术语 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
ASTM B 884-2005 用于超导的铌钛合金坯料、棒材和条材的标准规范 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B 888-2006 电连接器或弹簧触点生产用铜合金带材的标准规范 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
ASTM B 890-2007 用X射线荧光光谱法测定钨合金和钨硬金属的金属成分用标准试验方法 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM B 891-1998 带集成散热片的无缝和焊接钛及钛合金冷凝器和热交换器管的标准规范 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B 892-2003 压模铸造用锌铜铝合金锭标准规范 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
ASTM B 894-2003 锌铜铝合金压铸件标准规范 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
ASTM B 897-2003 锌及锌合金大铸锭和坯锭的外形标准规范 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
ASTM B 899-2006 有色金属和合金的相关标准术语 Standard Terminology Relating to Non-ferrous Metals and Alloys
ASTM B 90/B 90M-2007 镁合金薄板材和板材的标准规范 Standard Specification for Magnesium-Alloy Sheet and Plate
ASTM B 900-2004 美国政府机构用铜和铜合金轧制品包装的标准实施规程 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
ASTM B 906-2002 压延镍和镍合金板材、薄板和带材的一般要求的标准规范 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 908-2003 锌合金铸锭的色码使用的标准规程 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
ASTM B 91-2007 镁合金锻件的标准规范 Standard Specification for Magnesium-Alloy Forgings
ASTM B 914-2003 钢的热浸镀锌中使用的锌及锌合金锭色码的标准规程 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
ASTM B 917/B 917M-2007 整个工艺用铝合金铸件热处理的标准实施规程 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
ASTM B 918-2001 锻造铝合金的热处理的标准实施规程 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
ASTM B 92/B 92M-2007 再熔炼用非合金镁锭和镁棒的标准规范 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
ASTM B 920-2001 用次氯酸钠液的蒸气测定金属衬底上金和钯合金覆层孔隙度的标准实施规范 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
ASTM B 921-2002 铝和铝合金上覆盖的非六价铬层的标准规范 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
ASTM B 924-2002 具有整体散热叶片的冷凝器及热交换器用无缝及焊接镍合金管标准规范 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B 926-2003 用灯标表测定铝及铝合金平箔中气泡的标准方法 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
ASTM B 928/B 928M-2007 海上服务和类似环境用高镁铝合金薄板材和板材的标准规范 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
ASTM B 929-2005 铜镍锡旋节合金棒材和杆材的标准规范 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
ASTM B 93/B 93M-2007 砂型铸件、硬模铸件和压模铸件铸锭用镁合金的标准规范 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
ASTM B 930-2003 确定烧结碳化钨(硬质合金)中不规则大颗粒的频度和粒径额定值的标准试验方法 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B 932-2004 低碳镍、铬、钼、钆合金板、薄板材和带材的标准规范 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
ASTM B 936-2004 铜铬铁钛合金板、薄板、带材和轧制棒材的标准规范 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
ASTM B 938-2004 铜铍合金锻件和挤制件的标准规范 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
ASTM B 94-2007 镁合金压模铸件的标准规范 Standard Specification for Magnesium-Alloy Die Castings
ASTM B 941-2005 电工用耐热铝锆合金丝的标准规范 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
ASTM B 943-2005 电子设备热喷涂用锌和锌合金线的标准规范 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
ASTM B 945-2006 T1、T2、T5、和T10型回火产品的梯度温度成形加工的冷挤压铝合金的标准规范 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
ASTM B 947-2006 铝合金厚板用热轧钢机溶解热处理的标准实施规范 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B 949-2006 锌和锌合金产品一般要求的标准规范 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
ASTM B 950-2006 铜和铜合金产品规范的编辑程序和格式的标准指南 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
ASTM B 951-2007 铸造和锻造非合金镁及镁合金的代码化用标准实施规程 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
ASTM B 952-2007 旋转铸造用锭状锌合金的标准规范 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
ASTM B 953-2007 光谱化学分析用镁和镁合金取样的标准实施规程 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
ASTM B 954-2007 用原子发射光谱法分析镁和镁合金的标准试验方法 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
ASTM B 96/B 96M-2006 一般用途和压力容器用铜硅合金板材、薄板、带材和轧制棒材的标准规范 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
ASTM B 99/B 99M-2006 一般用途的硅铜合金线材的标准规范 Standard Specification for Copper-Silicon Alloy Wire for General Applications
ASTM C 752-2003 核纯级的银铟镉合金标准规范 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
ASTM C 760-1990 核纯级银铟镉合金的化学及光谱化学分析方法 Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
ASTM D 1730-2003 涂漆用铝和铝合金表面预处理标准实施规范 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 1732-2003 涂漆用镁合金表面预处理的标准实施规范 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
ASTM D 2201-1999 试验涂料及相关镀覆产品用镀锌和镀锌合金钢板的制备的标准操作规程 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
ASTM D 3115-1995 高剪切应力下润滑剂与航空用合金爆炸反应性的标准试验方法 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 3185-2006 包括混合物和油的SBR（苯乙烯合金橡胶）的橡胶评估的标准试验方法 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
ASTM D 4340-1996 在排热条件下发动机冷却剂对铸造铝合金腐蚀性的标准试验方法 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 4673-2002 丙烯腈-丁二烯-苯乙烯(ABS)塑料及合金模压和挤压材料的标准分类系统 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ASTM D 6208-2007 用恒电流测量铝及其合金的再钝化电位的标准试验方法 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM D 6492-1999 锌及锌/铝合金涂覆钢上六价铬检测的标准实施规程 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D 6865-2004 丙烯氰-苯乙烯-丙烯酸盐和丙烯氰-EPDM-苯乙烯塑料和合金模制和挤压材料的标准分类系统 Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
ASTM E 1009-1995 分析碳和低合金钢用光辐射真空分光仪的评估 Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
ASTM E 101-1991 用点对面技术做铝和铝合金光谱分析的试验方法 Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique
ASTM E 1019-2003 钢、铁、镍和钴合金中碳、硫、氮和氧含量测定的标准试验方法 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM E 106-1983 铜铍合金的化学分析标准试验方法 Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys
ASTM E 1158-2004 金属和金属合金生产材料的脉冲纵波超声检验用的标准块的材料选择与制造的标准指南 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material
ASTM E 1159-1998 热电偶材料的标准规范.铂-铑合金和铂 Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
ASTM E 118-1989 铜铬合金的化学分析试验方法 Test Methods for Chemical Analysis of Copper-Chromium Alloys
ASTM E 121-1983 铜碲合金的化学分析标准试验方法 Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys
ASTM E 1251-2007 用原子发射光谱法分析铝和铝合金的标准试验方法 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E 127-2006 超声波标准参考铝合金块的制造及检验标准实施规程 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
ASTM E 1277-2002 用ICP发射光谱测定法对锌-5%铝-铈合金作化学分析的标准试验方法 Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM E 1282-1998 规定金属及其合金的化学成分并选择取样的实际操作与定量分析方法 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
ASTM E 129-1974 用粉末技术做热离子镍合金光谱分析的试验方法 Test Method for Spectrographic Analysis of Thermionic Nickel Alloys by the Powder Technique
ASTM E 1306-2007 测定化学成分用电弧溶化法制备金属及合金式样的标准实施规程 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM E 1338-1997 计算机化材料特性数据库的金属和合金的识别 Guide for Identification of Metals and Alloys in Computerized Material Property Databases
ASTM E 1339-1990 计算机管理材料性能数据库中铝合金和零件的识别 Identification of Aluminum Alloys and Parts in Computerized Material Property Databases
ASTM E 1409-2005 用惰性气体熔解技术测定钛及钛合金中氧和氮的标准试验方法 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E 1447-2005 惰性气体熔解热传导/红外检测法测定钛和钛合金中氢的标准试验方法 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 1450-2003 液氦中结构合金抗拉试验的标准试验方法 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1473-2003 镍、钴和耐高温合金化学分析用标准试验方法 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
ASTM E 1497-2005 水混合金属加工液的安全使用的标准实施规程 Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids
ASTM E 1552-1993 使用氢等离子体光谱计测定锆和锆合金中铪的标准试验方法 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using the D-C Argon Plasma Spectrometer
ASTM E 1615-2005 使用锌铁合金法测定微量铁的标准试验方法 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E 1659-2005 电镀镍锌合金薄钢板的涂层重量和化学分析的标准试验方法 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM E 1793-2005 连入泡沫和梁型可移动遮蔽物的铝合金制备的标准实施规程 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
ASTM E 1826-2005 铝合金粘结用低挥发性有机化合物耐腐蚀粘合底漆的标准规范 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
ASTM E 1834-1996 电热原子吸收光谱法测定镍合金中铅的标准试验方法 Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM E 1835-1996 火焰原子吸收光谱法分析镍合金的标准试验方法 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E 1852-1996 用电热原子吸收光谱测定法测定碳和低合金钢中锑低含量的标准试验方法 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry
ASTM E 1916-1997 混合金属的识别和/或分离标准指南 Standard Guide for Identification and/or Segregation of Mixed Lots of Metals
ASTM E 1917-2002 用双氧钒磷钼酸盐分子吸收光谱测定法测定镍、镍铁和镍合金中磷含量的标准试验方法 Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method
ASTM E 1938-2002 用二安替比林甲烷分子吸收光谱测定法测定镍合金中钛含量的标准试验方法 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM E 1941-2004 高熔点和活性金属及其合金中碳含量测定的标准试验方法 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ASTM E 212-1966 用杆对杆技术对碳素钢及低合金钢做光谱分析的方法 Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-to-Rod Technique
ASTM E 215-1998 无缝铝合金管的电磁检验用的标准化设备 Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube
ASTM E 2371-2004 用原子辐射等离子体光谱测定法分析钛和钛合金的标准试验方法 Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
ASTM E 243-1997 铜及铜合金管的电磁(涡流)检验 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
ASTM E 2465-2006 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM E 255-2002 化学成分测定用铜和铜合金取样的标准实施规范 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E 272-1999 高强度铜基和镍铜合金铸件用参考射线照片 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASTM E 293-1968 用溶解技术测定低合金钢中酸溶性铝的光谱分析试验法 Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique
ASTM E 32-1986 测定化学成分用铁合金及钢添加剂的取样 Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E 322-1996 低合金钢和铸铁的X射线发射光谱测定分析法 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
ASTM E 34-1994 铝和铝基合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
ASTM E 340-2000 金属和合金宏观腐蚀的标准试验方法 Standard Test Method for Macroetching Metals and Alloys
ASTM E 35-1988 镁和镁合金的化学分析试验方法 Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys
ASTM E 350-1995 碳素钢、低合金钢、硅电工钢、铁铸锭和熟铁化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
ASTM E 352-1993 工具钢及其它类似中合金钢和高合金钢化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
ASTM E 353-1993 不锈钢、耐热钢、马氏体钢和其它类似的铬镍铁合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM E 354-1993 高温钢、电工钢、磁钢和其它类似的铁、镍和钴合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 363-1983 铬和铬铁合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
ASTM E 367-2003 铌铁合金的化学分析标准方法 Standard Methods for Chemical Analysis of Ferroniobium
ASTM E 372-2001 镁硅铁合金中钙和镁的测定用标准试验方法 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon
ASTM E 407-2007 微蚀金属和合金的标准实施规程 Standard Practice for Microetching Metals and Alloys
ASTM E 415a-1999 碳和低合金钢光辐射真空光谱测定分析的标准试验方法 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E 426-1998 无缝焊接管形产品、奥氏体不锈钢的类似合金的电磁(涡电流)检验 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
ASTM E 47-1993 锌压铸合金的化学分析试验方法 Test Methods for Chemical Analysis of Zinc Die-Casting Alloys
ASTM E 478-2003 铜合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E 527-2007 统一编号系统(UNS)中金属和合金编号的标准实施规程 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E 53-2002 用重量分析法测定非合金铜中铜含量的标准试验方法 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E 536-2005 锌和锌合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM E 539-2007 6铝4钒钛合金的X射线荧光光谱测定分析用标准试验方法 Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM E 55-1991 测定化学成分用锻制有色金属及其合金铸件的取样 Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E 571-1998 镍及镍合金管形制品的电磁(涡电流)检验 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
ASTM E 572a-2002 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E 581-2004 锰铜合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
ASTM E 62-1989 铜和铜合金的化学分析标准试验方法(光度测定法) Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
ASTM E 634-2005 光发射光谱测定分析用锌和锌合金取样的标准实施规程 Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
ASTM E 693-2001 根据每个原子(DPA)、E706(ID)位移辨别铁和低合金钢中子照射特性的标准实施规程 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
ASTM E 696-2007 钨-铼合金热电偶丝的标准规范 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
ASTM E 716-1994 光谱化学分析用铝和铝合金取样 Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
ASTM E 75-1976 铜镍及铜镍锌合金的化学分析试验方法 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
ASTM E 864-2003 蜂窝状保护板中要用粘合剂粘结的铝合金表面准备的标准实施规范 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E 866-2005 蜂窝状保护板中粘结铝合金用耐腐蚀粘合底漆的标准规范 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E 88-1991 测定化学成分用有色金属及其合金铸件的取样 Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM E 963-1995 用盐酸甲烷电解质从镍和镍铁积超热合金中进行相位的电解提取 Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
ASTM F 1058-1997 外科植入物用煅制钴-铬-镍-钼-铁合金 Standard Specification for Wrought Cobalt-Chromium-Nickel-Molybdenum-Iron Alloy for Surgical Implant Applications
ASTM F 1108-2004 外科植入物用Ti6Al4V合金铸件的标准规范 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1108a-1997 外科移植用Ti6Al4V合金铸件(UNS R56406)标准规范 Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1182-1990 阳极,镀锌合金 Standard Specification for Anodes, Sacrificial Zinc Alloy
ASTM F 1183-1996 铝合金链环栅栏结构 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
ASTM F 1295-2005 外科植入设备用锻制钛-6铝-7铌合金的标准规范 Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700)
ASTM F 1345-1996 锌-5%铝-铈合金涂覆钢连接链环栏栅结构 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
ASTM F 136a-2002 外科植入设备用锻制钛6和铝4钒特低杂质合金的标准规范(UNS R56401) Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ASTM F 1466-1999 金属与陶瓷密封用铁镍钴合金的标准规范 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
ASTM F 1472a-2002 外科植入设备用锻制钛6铝4钒合金的标准规范(UNS R56400) Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 15-2004 铁-镍-钴密封合金的标准规范 Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
ASTM F 1513-1999 电子薄膜器件用纯铝(非合金)原材料标准规范 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
ASTM F 1537-2007 外科植入物用钴-28铬-6钼合金的标准规范(UNS R31537、UNS R31538和UNS R31539) Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 1545-1997 有塑料内衬的铁合金管、配件和法兰的标准规范 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F 1580-2001 外科植入物涂敷用钛及钛-6铝-4钒合金粉末的标准规范 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F 1684-2006 低热膨胀用铁-镍和铁-镍-钴合金的标准规范 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM F 1713-2003 外科植入物用锻制钛-13铌-13锆合金的标准规范 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications
ASTM F 1813-2006 外科植入物用锻压的钛-12钼-6锆-2铁合金(UNS R58120)的标准规范 Standard Specification for Wrought Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant (UNS R58120)
ASTM F 2004-2005 用热分析法测定镍-钛合金转变温度的标准试验方法 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
ASTM F 2005-2005 镍-钛型记忆合金的标准术语 Standard Terminology for Nickel-Titanium Shape Memory Alloys
ASTM F 2063-2005 医疗器械和外科植入物用锻造镍钛形状记忆合金标准规范 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
ASTM F 2066-2007 外科植入物用锻制钛-15钼合金的标准规范(UNS R58150) Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
ASTM F 2082-2006 通过弯曲和自由回复试验测定镍钛形状记忆合金转变温度的标准试验方法 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM F 2146-2007 外科移植物用锻造钛-3铝-2.5钒合金无缝管的标准规范(UNS R56320) Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
ASTM F 2229-2007 外科植入物用锻制氮增强23锰-21铬-1钼低镍不锈钢合金棒材和线材的标准规范(UNS S29108) Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
ASTM F 2281-2004 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM F 2282-2003 机械紧固件用碳钢和合金钢丝、杆材、棒材的质量保证要求的标准规范 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F 2329-2005 碳钢和合金钢螺栓、螺钉、垫圈、螺母和特殊螺纹紧固件用热浸镀锌覆层的标准规范 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM F 2384-2005 用于外科植入物的锻造锆-2.5铌合金的标准规范 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM F 2437-2006 与螺旋帽、螺栓、锚和螺柱用碳和合金钢可压缩垫圈式直读张力指示器的标准规范 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F 2527-2005 外科植入物用锻造无缝和焊接及拉制的钴合金小直径管的标准规范（UNS R30003、 UNS R30008、 UNS R30035、 U Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
ASTM F 256-2005 含有18%或26%铬的铬铁焊接用合金的标准规范 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
ASTM F 2581-2007 外科植入物用锻制氮增强的11锰-17铬-3钼低镍不锈钢合金棒材和金属丝的标准规范 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
ASTM F 2633-2007 医疗设备和外科植入物用可锻无缝镍钛形状记忆合金管标准规范 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
ASTM F 30-1996 铁镍密封合金标准规范 Standard Specification for Iron-Nickel Sealing Alloys
ASTM F 31-2005 42%镍6%铬铁焊接用合金的标准规范 Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy
ASTM F 541-2004 合金钢有眼螺栓的标准规范 Standard Specification for Alloy Steel Eyebolts
ASTM F 560-2007 外科植入物用非合金钽的标准规范(UNS R05200、UNS R05400) Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
ASTM F 562-2007 外科植入用锻制35钴-35镍-20铬-10钼合金标准规范(UNS R30035) Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM F 568M-2004 碳素和合金钢外螺纹米制紧固件标准规范 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
ASTM F 620-2006 外科植入用α加β钛合金锻件的标准规范 Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
ASTM F 67-2006 外科植入用非合金钛(UNS R50250、UNS R50400、UNS R50550、UNS R50700)标准规范 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
ASTM F 688-2005 外科植入物用锻制钴35镍20铬10钼合金板、薄板及箔标准规范 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
ASTM F 73-1996 电子器件及灯泡用钨铼合金丝 Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
ASTM F 75-2007 外科植入术用钴28铬6钼铸件和铸造合金的标准规范 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
ASTM F 799-2006 外科移植物用钴28铬6钼合金锻件(UNS R31537、R31538、R31539)标准规范 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
ASTM F 835-2004 合金钢凹半圆头及平顶沉头六角螺钉的标准规范 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F 835M-2004 合金钢凹半圆头及平顶沉头六角螺钉(米制)标准规范 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
ASTM F 90-2007 外科植入物用锻造钴-20铬-15钨-10镍合金的标准规范 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM F 912-2004 合金钢凹头定位螺钉的标准规范 Standard Specification for Alloy Steel Socket Set Screws
ASTM F 912M-2004 合金钢凹头定位螺钉(米制)的标准规范 Standard Specification for Alloy Steel Socket Set Screws [Metric]
ASTM F 945-2006 航空发动机清洗材料对钛合金的应力腐蚀标准试验方法 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM F 96-1977 锻制的铜和镍电子级合金 Electronic Grade Alloys of Copper and Nickel in Wrought Forms
ASTM F 961-2003 外科植入物用钴镍铬钼合金锻件标准规范 Standard Specification for Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical Implants [UNS R30035]
ASTM G 101-2004 低合金钢耐大气腐蚀评估的标准指南 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
ASTM G 103-1997 在6%沸腾的氯化钠溶液中进行铝锌镁低铜合金的应力腐蚀断裂试验的标准实施规程 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
ASTM G 110-1992 将铝合金浸入氯化钠和过氧化氢溶液中进行热处理时抗晶粒间腐蚀的评定 Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
ASTM G 112-1992 进行铝合金的剥离腐蚀试验 Conducting Exfoliation Corrosion Tests in Aluminum Alloys
ASTM G 123-2000 沸腾酸化氯化钠溶液中不同镍合量不锈钢合金应力腐蚀裂纹评定的标准试验方法 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM G 139-2005 用破坏载荷法测定可热处理铝合金制品的抗应力腐蚀开裂特性的标准试验方法 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM G 146-2001 高压、高温精炼氢设备中使用的双金属不锈合金/钢板材非连接性评定的标准实施规程 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
ASTM G 157-1998 评价化学加工工业用煅铁和镍基抗腐蚀合金腐蚀特性的标准指南 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
ASTM G 186-2005 测定气漏检测器液体溶剂是否能引起黄铜合金应力腐蚀断裂的标准试验方法 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM G 188-2005 黄铜和其他铜合金用检漏仪溶液的标准规范 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
ASTM G 2/G 2M-2006 在750°F蒸汽中或在680°F水中锆、铪及其合金产品的腐蚀测试的标准试验方法 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C]
ASTM G 28-2002 煅制富镍铬轴承合金晶间腐蚀敏感性的探测用标准试验方法 Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
ASTM G 34-2001 2XXX和7XXX系列铝合金剥落腐蚀敏感性的试验方法(EXCO 试验) Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G 35-1998 不锈钢及有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性测定的标准实施规程 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
ASTM G 36-1994 评定在沸腾的氯化镁溶液中金属及其合金的抗应力腐蚀断裂 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
ASTM G 37-1998 用pH值为7.2的玛特松(mattsson's)溶液评价铜锌合金的应力腐蚀断裂灵敏性 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
ASTM G 44-1999 在3.5%氯化钠中性溶液中用交替浸渍法的金属及合金暴露的标准实施规程 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
ASTM G 47-1998 测定高强度铝合金制品应力腐蚀断裂敏感性的标准试验方法 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G 48-2003 用氯化铁溶液测定不锈钢及有关合金耐点腐蚀和缝隙腐蚀的标准试验方法 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G 52-2000 金属及合金在海水表面暴露与评定的标准实施规范 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G 61-1986 铁镍钴基合金的局部腐蚀敏感性的循环动电势极化强度的试验方法 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
ASTM G 64-1999 热处理铝合金抗应力腐蚀断裂性的标准分类 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
ASTM G 66-1999 5XXX系列铝合金的剥落腐蚀敏感性的外观评定的试验方法(ASSET试验) Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM G 67-2004 用接触硝酸环境之后的重量损失来测定5XXX系列铝合金晶间腐蚀敏感性的标准试验方法(NAMLT 试验) Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G 69-1997 测定铝合金潜在腐蚀性 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G 78-2001 海水及其它含氯化物的水环境中铁基和镍基不锈合金的裂隙腐蚀试验的标准指南 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
英国合金标准(BS alloy standards)
2SP 68 to 2SP 71-1973 铝和铝合金100度精密埋头铆钉规范 Specification for 100 countersunk precision head aluminium and aluminium alloy rivets
BS 1161-1977 结构用铝合金型材规范 Specification for aluminium alloy sections for structural purposes
BS 1212-1-1990 浮子阀.第1部分:活塞式浮子阀(铜合金阀体)(不含浮子)规范 Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212-2-1990 浮子阀.第2部分:隔膜式浮子阀(铜合金阀体)(不含浮子)规范 Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
BS 1306-1975 铜与铜合金承压管道系统规范 Specification for copper and copper alloy pressure piping systems
BS 143 & 1256-2000 可锻铸铁与铸铜合金螺纹管配件 Threaded pipe fittings in malleable cast iron and cast copper alloy
BS 143 and 1256-2000 可锻铸铁和铸铜合金的螺纹管配件 Threaded pipe fittings in malleable cast iron and cast copper alloy
BS 1473-1972 一般工程用可锻铝和铝合金规范.铆钉、螺栓和螺钉坯料 Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock
BS 1560-3.2-1989 管子、阀门和接头(规定等级)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第2节:铸铁法兰规范 Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges
BS 1640-1-1962 石油工业用钢对焊管管件规范.第1部分:锻制碳钢与铁素体合金钢管件 Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings
BS 1728-1-1951 铝与铝合金的分析方法.第1部分:铜的测定 Methods for the analysis of aluminium and aluminium alloys - Determination of copper
BS 1728-10-1957 铝与铝合金的分析方法.第10部分:锰的测定(吸收测量法) Methods for the analysis of aluminium and aluminium alloys - Determination of manganese (absorptiometric method)
BS 1728-11-1960 铝与铝合金的分析方法.第11部分:硅的测定(过氯酸法) Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (perchloric acid method)
BS 1728-12-1961 铝与铝合金的分析方法.第12部分:硅的测定(钼蓝吸收测定法) Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (absorptiometric molybdenum blue method)
BS 1728-14-1965 铝与铝合金的分析方法.第14部分:镍的测定(重量法) Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (gravimetric method)
BS 1728-15-1966 铝与铝合金的分析方法.第15部分:镍的测定(光度测量法) Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (photometric method)
BS 1728-16-1968 铝与铝合金的分析方法.第16部分:铬的测定(光度测量法) Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (photometric method)
BS 1728-17-1968 铝与铝合金的分析方法.第17部分:铬的测定(容量法) Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (volumetric method)
BS 1728-18-1970 铝与铝合金的分析方法.第18部分:锌的测定(EDTA离子交换容量法或极谱法) Methods for the analysis of aluminium and aluminium alloys - Determination of zinc (ion-exchange-volumetric EDTA or polarographic method)
BS 1728-19-1971 铝与铝合金的分析方法.镁的测定(原子吸收法) Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (atomic absorption method)
BS 1728-1971 铝与铝合金的分析方法.第19部分:镁的测定(原子吸收法) Methods for the analysis of aluminium and aluminium alloys. Determination of magnesium (atomic absorption method)
BS 1728-20-1971 铝与铝合金的分析方法.第20部分:铅的测定(原子吸收法) Methods for the analysis of aluminium and aluminium alloys - Determination of lead (atomic absorption method)
BS 1728-21-1973 铝与铝合金的分析方法.第21部分:锌(原子吸收法) Methods for the analysis of aluminium and aluminium alloys - Zinc (atomic absorption method)
BS 1728-22-1972 铝与铝合金的分析方法.第22部分:镁的测定(CDTA容量法) Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (volumetric CDTA method)
BS 1728-23-1976 铝与铝合金的分析方法.第23部分:铜(原子吸收法) Methods for the analysis of aluminium and aluminium alloys - Copper (atomic absorption method)
BS 1728-24-1976 铝与铝合金的分析方法.第24部分:镍(原子吸收法) Methods for the analysis of aluminium and aluminium alloys - Nickel (atomic absorption method)
BS 1728-25-1980 铝与铝合金的分析方法.第25部分:钛(变色酸分光光度法) Methods for the analysis of aluminium and aluminium alloys - Titanium (spectrophotometric chromotropic acid method)
BS 1728-5-1953 铝与铝合金的分析方法.第5部分:铜的测定(吸收测量法) Methods for the analysis of aluminium and aluminium alloys - Determination of copper (absorptiometric method)
BS 1728-6-1955 铝与铝合金的分析方法.第6部分:铁的测定(容量分析:氯化亚钛法) Methods for the analysis of aluminium and aluminium alloys - Determination of iron (volumetric: titanous chloride method)
BS 1728-8-1957 铝与铝合金的分析方法.第8部分:铁的测定(1:10菲咯啉吸收测量法) Methods for the analysis of aluminium and aluminium alloys - Determination of iron (absorptiometric 1:10-phenanthroline method)
BS 1728-9-1957 铝与铝合金的分析方法.第9部分:锰的测定(容量分析:亚砷酸盐/亚硝酸盐法) Methods for the analysis of aluminium and aluminium alloys - Determination of manganese (volumetric: arsenite/nitrite method)
BS 1748 Pts.1-5-1961 铜合金分析方法.第1部分至第5部分:铜合金中铜、铅、铁、铝和镍的测定方法 Methods for the analysis of copper alloys - Methods for the determination of copper, lead, iron, aluminium and nickel in copper alloys
BS 1748 Pts.11 and 12-1964 铜合金分析方法.第11和12部分:含铅青铜合金中铜和铅的测定方法 Methods for the analysis of copper alloys - Methods for the determination of copper and lead in leaded bronze alloys
BS 1748-6-1960 铜合金分析方法.第6部分:铜合金中锡的测定方法(镍线圈还原法) Methods for the analysis of copper alloys - Method for the determination of tin in copper alloys (nickel coil reduction method)
BS 1748-7-1960 铜合金分析方法.第7部分:铜合金中硅的测定方法(光度测量法) Methods for the analysis of copper alloys - Method for the determination of silicon in copper alloys (photometric method)
BS 1748-8-1960 铜合金分析方法.第8部分:铜合金中磷的测定方法(光度测量法） Methods for the analysis of copper alloys - Method for the determination of phosphorus in copper alloys (photometric method)
BS 1748-9-1963 铜合金分析方法.第9部分:铜合金中锌的测定方法 Methods for the analysis of copper alloys - Method for the determination of zinc in copper alloys
BS 1974-1953 铝合金大铆钉(标称直径1/2英寸至1英寸)规范 Specification for large aluminium alloy rivets (1/2 in. to 1 in. nominal diameters)
BS 2000-137-1993 石油和石油产品的试验方法.水混合金属加工油稀释液中油含量的测定 Methods of test for petroleum and its products - Determination of oil content of water mix metalworking oil dilutions
BS 2000-414-1996 石油和石油产品试验方法.第414部分;工业淬火油.冷却特性测定.镍合金探头试验法 Methods of test for petroleum and its products - Industrial quenching oils - Determination of cooling characteristics - Nickel-alloy probe test method
BS 2051-1-1973 工程用管与管接头规范.第1部分:工程用铜与铜合金毛细管与耐压管接头 Tube and pipe fittings for engineering purposes - Copper and copper alloys capillary and compression tube fittings for engineering purposes
BS 2051-2-1984 工程用管与管接头规范.第2部分:橄榄型铜合金耐压管接头 Tube and pipe fittings for engineering purposes - Specification for olive type copper alloy compression tube fittings
BS 2593-1974 旋转钻杆与碳化钨硬质合金旋转钻头规范 Specification for rotary drill rods and tungsten carbide tipped rotary drill bits
BS 2767-1991 散热器用手动控制铜合金阀的规范 Specification for manually operated copper alloy valves for radiators
BS 2816-1989 工程用银和银合金电镀层的规范方法 Method for specifying electroplated coatings of silver and silver alloys for engineering purposes
BS 2A 175-1962 飞行器用100°埋头铝合金螺栓(统一螺纹)规范 Specification for 100 ° countersunk head aluminium alloy bolts (Unified threads) for aircraft
BS 2A 29-1962 飞行器用铝合金六角螺母(B.A和B.S.F螺纹)(普通和开槽的)规范 Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft
BS 2A 61-1962 飞行器用铝合金制六角头螺栓(B.A和B.S.F螺纹)规范 Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft
BS 2B 25-2001 铜镍硅合金棒材、型材、锻坯、锻件和零件(热处理) Copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated)
BS 2B 26-2001 铜镍硅合金棒材、型材和零件(固溶处理、冷加工的和沉淀处理) Copper-nickel-silicon alloy rods, sections and parts (solution treated, cold worked and precipitation treated)
BS 2B 27-2002 铜锌铝镍硅合金管材 Copper-zinc-aluminium-nickel-silicon alloy tube
BS 2B 28-2001 铜铍合金带材、箔及零件(固溶处理和沉淀处理) Copper-beryllium alloy strip, foil and parts (solution treated and precipitation treated)
BS 2B 29-2001 铜铍合金带材、箔及零件(溶液处理、冷轧:低硬度和(固溶处理，冷轧：四分之一硬度和沉淀处理) Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard and precipitation treated)
BS 2B 30-2001 铜铍合金带材、箔及零件(固溶处理、冷轧:：半硬度和沉淀处理) Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard and precipitation treated)
BS 2B 31-2001 铜铍合金带材、箔及零件(固溶处理、冷轧:全硬度和沉淀处理) Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard and precipitation treated)
BS 2B 32-2001 铜铍合金棒材、型材及零件(固溶处理和沉淀处理) Copper-beryllium alloy rods, sections and parts (solution treated and precipitation treated)
BS 2B 33-2001 铜铍合金丝材及弹簧(固溶处理和沉淀处理) Copper-beryllium alloy wire and springs (solution treated and precipitation treated)
BS 2G 238-1996 普通机体或设备互连用(260℃)镀镍铜和铜合金导线绕扎绝缘电缆规范 Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation
BS 2HC 203-1989 镍-铬-铝-钼-铌合金铸件规范(镍基铬13.0、铝6.0、钼4.5、铌2.3) Specification for nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 13.0, Al 6.0, Mo 4.5, Nb 2.3)
BS 2HC 204-1989 镍-钴-铬-铝-钛-钼合金铸件规范(镍基钴15.0、铬10.0、铝5.5、钛4.8、钼3.0) Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0)
BS 2HC 207-1989 镍-钴-钨-铬-铝-钽-铪-钛合金铸件规范(镍基钴10.0、钨10.0、铬9.0、铝5.5、钽25、铪1.5、钛1.5) Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5)
BS 2HC 208-1989 镍-钴-钨-铬-铝-钼-钛-钽合金铸件规范(镍基钴10.0、钨10.0、铬9.0、铝5.5、钼2.5、钛1.5、钽1.5) Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalu m alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5)
BS 2HC 209-1989 低碳、沉淀硬化镍-铬-铝-钼-铌合金铸件规范(镍基铬11.5、铝6.0、钼4.0、铌2.0) Specification for low carbon, precipitation hardening nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 11.5, Al 6.0, Mo 4.0, Nb 2.0)
BS 2HC 210-1989 镍-钨-铝-铬-钼合金铸件规范(镍基钨10.5、铝6.0、铬6.0、钼2.0) Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0)
BS 2HC 211-1989 镍-铬-钴-钼-铝钛合金铸件规范(镍基铬15.5、钴10.0、钼8.3、铝4.2、钛3.6) Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6)
BS 2HR 1-1973 镍-铬-钛铝耐热合金坯锭、棒材、锻件和部件(镍基、Cr 19.5、Ti 2.2、Al 1.4)规范 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
BS 2HR 2-1973 镍-铬-钛-铝耐热合金坯锭、棒材、锻件和部件(镍基、Cr 19.5、Co18.0、Ti25、Al 1.5)规范 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS 2HR 201-1974 镍-铬-钛-铝耐热合金板材、薄板材和带材(镍基、Cr19.5、Ti2.2、Al1.4)规范 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
BS 2HR 202-1973 镍-铬-钴-钛耐热合金薄板材和带材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS 2HR 401-1973 冷加工和软化的无缝镍铬钛铝耐热合金管(镍基、Cr 19.5、Ti 2.2、Al 1.4)规范 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
BS 2HR 501-1973 弹簧用冷拉固溶热处理的镍铬钴钛铝耐热合金线材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS 2HR 502-1973 弹簧用冷拉和固溶热处理的镍铬钴钛铝耐热合金线材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS 2HR 503-1973 螺纹垫圈(直径0.45mm-2mm)用镍铬钴钛铝耐热合金线材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS 2HR 504-1973 镍-铬-钛耐热合金棒材、线材和铆钉(镍基、Cr19.5、Ti0.4)规范 Specification for nickel-chromium-titanium heat-resisting alloy bar, wire and rivets (nickel base, Cr 19.5, Ti 0.4)
BS 2L 126-1970 镁-铈（稀土金属）(3.0)-锌(2.3)-锆(0.6)合金铸锭和铸件规范(沉淀处理) Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)
BS 2L 127-1970 镁-锌(4.5)-锆(0.7)合金铸锭和铸件规范(沉淀处理) Specification for ingots and castings of magnesium-zinc-zirconium alloy (precipitation treated) (Zn 4.5, Zr 0.7)
BS 2L 128-1970 镁-锌(4.5)-铈（稀土金属）(1.2)-锆(1.7)合金铸锭和铸件规范(沉淀处理) Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7)
BS 2L 169-2002 铝-硅-镁合金(Si 7, Mg 0.6)的铸锭和(溶解处理和人工老化的)铸件 Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0.6)
BS 2L 500-1973 可锻制的镁基合金检验和试验规程 Procedure for inspection and testing of wrought magnesium-base alloys
BS 2L 503-1973 镁-铝(6)-锌(1.0)合金管规范 Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
BS 2L 504-1973 镁-锌(3)-锆(0.6)合金的薄板材和带材规范 Specification for sheet and strip of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
BS 2L 505-1973 镁-锌(3)-锆(0.6)合金棒材和挤压型材规范(直径或较小截面尺寸小于100mm) Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)
BS 2L 508-1973 镁-1<1/4>%锌(1.25)-锆(0.6)合金棒材和挤压型材规范(适用于隋性气体保护弧焊技术)(直径不超过50mm或较小截 Specification for bars and extruded sections of magnesium-11/4% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6)
BS 2L 509-1973 镁-锌(1.25)-锆(0.6)合金管规范(适用于隋性气体保护弧焊技术) Specification for tube of magnesium-11/4% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25 , Zr 0.6)
BS 2L 77-1971 铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金锻坯和锻件的规范(溶解和沉淀处理) Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 83-1971 铝-铜(2)-镍(1)-镁(1)-铁(0.9)-硅(0.9)合金锻坯、棒材、挤压型材和锻件规范(溶解处理和沉淀处理) Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
BS 2L 85-1971 铝-铜(1.5)-硅(1)和镁(0.8)合金锻坯、棒材、挤压型材和锻件规范(溶解处理和沉淀处理) Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
BS 2L 87-1971 用于制造螺母、联轴节和机加工中空零部件的铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金六角棒材规范(固溶处理 Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 93-1971 铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金板规范(固溶处理,控制拉伸和沉淀处理) Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated , controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 95-1971 铝-锌(5.8)-镁(2.5)-铜(1.6)-铬(0.15)合金板规范(溶解处理、控制拉伸和沉淀处理) Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
BS 2L 97-1971 铝-铜(4.4)-镁(1.5)-锰(0.6)合金中厚板材规范(固溶处理,室温时效:控制拉伸) Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2L 98-1971 铝-铜(4.4)-镁(1.5)-锰(0.6)合金板规范(溶解处理、室温时效:不控制拉伸的) Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2L 99-1972 铝-硅(7)-镁(0.3)合金铸锭和铸件规范(固溶处理和沉淀处理) Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
BS 2SP 148-150-1979 铝合金统一垫圈规范 Specification for Unified aluminium alloy washers
BS 2SP 151-153-1979 合金钢统一垫圈规范 Specification for Unified alloy steel washers
BS 2SP 77 to 2SP 80-1973 圆头形铝和铝合金铆钉规范 Specification for snap head aluminium and aluminium alloy rivets
BS 2SP 81 and 2SP 82-1973 圆头高镍铜合金铆钉规范 Specification for snap head high nickel-copper alloy rivets
BS 2SP 83 to 85-1973 菌形头铝合金铆钉规范 Specification for mushroom head aluminium alloy rivets
BS 2SP 87 and 2SP 88-1973 100°埋头高镍铜合金铆钉规范 Specification for 100 ° countersunk head high nickel-copper alloy rivets
BS 2TA 10-1974 钛铝钒合金薄板材规范(抗拉强度960-1270MPa) Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
BS 2TA 100-1973 锻造钛和钛合金的检验和试验规程 Procedure for inspection and testing of wrought titanium and titanium alloys
BS 2TA 11-1974 机加工用钛铝钒合金棒材和型材规范(抗拉强度900-1160MPa)(限定等圆断面150mm) Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 12-1974 钛铝钒合金锻坯规范(抗拉强度900-1160MPa)(限定等圆断面150mm) Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 13-1974 钛铝钒合金锻件规范(抗拉强度900-1160MPa)(限定等圆断面150mm) Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 21-1973 钛铜合金薄板材和带材规范(抗拉强度540-700 N/mm<上标2>) Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)
BS 2TA 22-1973 机加工钛铜合金棒材和型材规范(抗拉强度540-770 N/mm<上标2>) Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm2)
BS 2TA 23-1973 钛铜合金锻坯规范(抗拉强度540-770 N/mm<上标2>) Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm2)
BS 2TA 24-1973 钛铜合金锻件规范(抗拉强度540-770 N/mm<上标2>) Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm2)
BS 2TA 28-1974 钛铝钒合金锻坯和线材规范(抗拉强度1100-1300MPa)(限定等圆断面20mm)(主要供加工符合英国标准A系列要求的紧 Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners complying with the requirements of the 'A' series of British Standards)
BS 3071-1986 镍铜合金铸件规范 Specification for nickel-copper alloy castings
BS 3072-1989 镍与镍合金规范:薄板材和中厚板材 Specification for nickel and nickel alloys: sheet and plate
BS 3073-1977 镍和镍合金带材规范 Specification for nickel and nickel alloys: strip
BS 3074-1989 镍与镍合金无缝管规范 Specification for nickel and nickel alloys: seamless tube
BS 3075-1976 镍与镍合金线材规范 Specification for nickel and nickel alloys: wire
BS 3076-1989 镍与镍合金棒材规范 Specification for nickel and nickel alloys: bar
BS 3146-1-1974 金属熔模铸造规范.第1部分:碳素钢与低合金钢 Specification for investment castings in metal - Carbon and low alloy steels
BS 3146-2-1975 金属熔模铸造规范.第2部分:耐蚀耐热钢、镍和钴基合金 Specification for investment castings in metal - Corrosion and heat resisting steels, nickel and cobalt base alloys
BS 3332-1987 轴承用巴比合金锭规范 Specification for white metal bearing alloy ingots
BS 3338-10-1961 锡及锡合金取样及分析方法.第10部分:锡锭、锡铅焊料及轴承用巴比合金中铁含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
BS 3338-11-1961 锡及锡合金取样及分析方法.第11部分:焊料中锡含量测定方法(镍带卷还原法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in solders (nickel coil reduction method)
BS 3338-13-1965 锡及锡合金取样及分析方法.第13部分:焊料及轴承用巴比合金中锑含量测定方法(溴酸钾容量法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)
BS 3338-14-1965 锡及锡合金的取样及分析方法.第14部分:轴承用巴比合金锭取样方法 Methods for the sampling and analysis of tin and tin alloys - Method for the sampling of white metal bearing alloy ingots
BS 3338-15-1965 锡及锡合金取样及分析方法.第15部分:轴承用巴比合金中铜和铅含量测定方法(电解镀层法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)
BS 3338-16-1965 锡及锡合金取样及分析方法.第16部分:轴承用巴比合金中锡含量测定方法(镍带卷还原法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)
BS 3338-17-1965 锡及锡合金的取样及分析方法.第17部分:焊料及轴承用巴比合金中镉含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)
BS 3338-18-1966 锡及锡合金取样及分析方法.第18部分:焊料及轴承用白合金中铝含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)
BS 3338-19-1966 锡及锡合金的取样及分析方法.白金属轴承合金和钎料中锌的测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
BS 3338-1966 锡及锡合金的取样及分析方法.第19部分:焊料及白合金轴承中锌的测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
BS 3338-2-1961 锡及锡合金取样及分析方法.第2部分:锡锭中锡含量测定方法(铝还原法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in ingot tin (aluminium reduction method)
BS 3338-20-1970 锡及锡合金取样及分析方法.第20部分:浇灌金属中镍含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of nickel in capping metal (photometric method)
BS 3338-21-1983 锡及锡合金取样及分析方法.第21部分:软焊料中高镉含量测定方法 Methods for the sampling and analysis of tin and tin alloys - Determination of high cadmium content of soft solders
BS 3338-3-1961 锡及锡合金取样及分析方法.第3部分:锡锭中锑含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in ingot tin (photometric method)
BS 3338-4-1961 锡及锡合金取样及分析方法.第4部分:锡锭及锡铅焊料中铜的测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in ingot tin and tin-lead solders (photometric method)
BS 3338-5-1961 锡及锡合金取样及分析方法.第5部分:锡锭及锡锑焊料中铅含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of lead in ingot tin and tin-antimony solders (photometric method)
BS 3338-6-1961 锡及锡合金取样及分析方法.第6部分:高纯度锡锭中铜的测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in high purity ingot tin (photometric method)
BS 3338-7-1961 锡及锡合金取样及分析方法.第7部分:焊料中银含量测定方法(硫氰酸铵容量法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of silver in solders (volumetric: ammonium thiocyanate method)
BS 3338-8-1961 锡及锡合金取样及分析方法.第8部分:锡锭、锡铅焊料及轴承用巴比合金中铋含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
BS 3338-9-1965 锡及锡合金取样及分析方法.第9部分:锡锭、焊料及轴承用巴比合金中砷含量测定方法(光度测定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)
BS 3382 Pts.3 and 4-1965 螺纹部件的电镀层规范.第3部分:钢制部件的镍或镍铬镀层.第4部分:铜及铜合金(包括黄铜)部件的镍或镍铬镀层 Specification for electroplated coatings on threaded components - Nickel or nickel plus chromium on steel components - Nickel or nickel plus chromium on copper and copper alloy (including brass) components
BS 3382 Pts.5 and 6-1967 螺纹部件的电镀层规范.第5部分:铜和铜合金(包括黄铜)部件的锡镀层.第6部分:铜和铜合金(包括黄铜)部件的银镀 Specification for electroplated coatings on threaded components - Tin on copper and copper alloy (including brass) components - Silver on copper and copper alloy (including brass) components
BS 3467-1962 精密电阻器合金丝电阻温度系数试验方法 Method of test for temperature coefficient of resistance of alloy wire for precision resistors
BS 3520-1962 牙科用精制贵金属合金丝规范 Specification for dental wrought precious metal alloy wire
BS 3551-1962 合金钢锁扣规范 Specification for alloy steel shackles
BS 3597-1984 65/35锡/镍合金电镀层规范 Specification for electroplated coatings of 65/35 tin/nickel alloy
BS 3604-2-1991 承压钢管.具有规定高温特性的铁合金钢.第2部分:纵向电弧焊接管规范 Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes
BS 3630-16-1976 锌和锌合金的取样与分析方法.第16部分:锌合金中镍含量(光度测量法) Methods for the sampling and analysis of zinc and zinc alloys - Nickel in zinc alloys (photometric method)
BS 3821-1-1974 硬质合金模具和配套硬质合金工具规范.第1部分:烧结模坯和精加工模名称与标记 Specification for hardmetal dies and associated hardmetal tools - Designation and marking of as-sintered pellets and finished dies
BS 3821-2-1974 硬质合金模具和配套硬质合金工具规范.第2部分:拉制圆金属丝用烧结模坯和精加工模 Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round wire
BS 3821-3-1974 硬质合金模具和配套硬质合金工具规范.第3部分:拉制圆棒材用烧结模坯和精加工模 Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round bar
BS 3821-4-1982 硬质合金模具和配套硬质合金工具规范.第4部分:顶锻模用硬质合金烧结模坯尺寸和公差 Specification for hardmetal dies and associated hardmetal tools - Dimensions and tolerances of as-sintered hardmetal pellets used in heading dies
BS 3907-1-1965 镁和镁合金分析方法.第1部分:镁合金中铝含量测定(重量法) Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium alloys (gravimetric method)
BS 3907-10-1969 镁和镁合金分析方法.第10部分:含稀土元素锆、钍和(或)银的镁合金中锰含量测定(光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver (photometric method)
BS 3907-11-1970 镁和镁合金分析方法.第11部分:硅含量测定(光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of silicon in magnesium and magnesium alloys (photometric method)
BS 3907-12-1971 镁和镁合金分析方法.第12部分:铝含量测定(光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium and magnesium alloys (photometric method)
BS 3907-13-1972 镁和镁合金分析方法.第13部分:锡含量测定(光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of tin in magnesium and magnesium alloys (photometric method)
BS 3907-15-1976 镁和镁合金分析方法.第15部分:铅含量测定(原子吸收法) Methods for the analysis of magnesium and magnesium alloys - Determination of lead in magnesium and magnesium alloys (atomic absorption method)
BS 3907-2-1966 镁和镁合金分析方法.第2部分:铁含量测定(1:10-菲绕啉光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of iron in magnesium and magnesium alloys (photometric - 1:10-phenanthroline method)
BS 3907-3-1966 镁和镁合金的分析方法.第3部分:镁和镁合金中铜含量的测定(光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of copper in magnesium and magnesium alloys (photometric method)
BS 3907-4-1966 镁和镁合金分析方法.第4部分:锰含量测定(高碘酸盐光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium and magnesium alloys (photometric-periodate method)
BS 3907-5-1966 镁和镁合金分析方法.第5部分:低锰含量测定(高碘酸盐光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents)
BS 3907-6-1969 镁和镁合金分析方法.第6部分:锆含量测定(光度测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of zirconium in magnesium and magnesium alloys (photometric method)
BS 3907-7-1969 镁和镁合金分析方法.第7部分:镁合金中镍含量测定(光度法) Methods for the analysis of magnesium and magnesium alloys - Determination of nickel in magnesium alloys (photometric method)
BS 3907-8-1970 镁和镁合金分析方法.第8部分:镁合金中全部稀土族元素含量测定 Methods for the analysis of magnesium and magnesium alloys - Determination of total rare earths in magnesium alloys (gravimetric method)
BS 3907-9-1969 镁和镁合金分析方法.第9部分:镁合金中锌含量测定(乙二胺四醋酸离子置换容积测量法) Methods for the analysis of magnesium and magnesium alloys - Determination of zinc in magnesium alloys (ion-exchange-volumetric EDTA method)
BS 3908-10-1989 铅和铅合金取样与分析方法.第10部分:铅合金中锑含量测定(滴定法) Methods for the sampling and analysis of lead and lead alloys - Antimony in lead alloys (titrimetric method)
BS 3908-13-1970 铅和铅合金取样与分析方法.第13部分:少量锑含量的测定(光度测量法) Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method)
BS 3908-2-1967 铅和铅合金取样与分析方法.第2部分:砷含量测定(光度测量法) Methods for the sampling and analysis of lead and lead alloys - Arsenic in lead and lead alloys (photometric method)
BS 3908-6-1971 铅和铅合金取样与分析方法.第6部分:碲含量测定(光度测量法) Methods for the sampling and analysis of lead and lead alloys - Tellurium in lead and lead alloys (photometric method)
BS 3908-9-1991 铅和铅合金取样和分析方法.第9部分:硫含量测定 Methods for the sampling and analysis of lead and lead alloys - Sulphur in lead and lead alloys
BS 3A 107-1962 飞行器用铝合金螺母(统一六角形和统一螺纹)(普通和开槽的)规范 Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft
BS 3A 171-1962 飞行器铝合金盘头螺栓(统一螺纹)规范 Specification for aluminium alloy pan head bolts (Unified threads) for aircraft
BS 3HR 100-1978 可锻耐热合金的检验和试验规程 Procedure for inspection and testing of wrought heat-resisting alloys
BS 3HR 601-1989 紧固件制造用(最大直径或小截面尺寸为30mm)镍-铬-钛-铝耐热合金棒材和线材(镍基铬19.5、钛2.2、铝1.4)规范 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm) (nickel base Cr 19.5, Ti 2.2, Al 1.4)
BS 3L 122-1970 镁-铝(8)-锌(0.5)-锰(0.3)合金铸锭和铸件规范(固溶处理) Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
BS 3L 124-1970 镁-铝(10)-锌(0.5)-锰(0.3)合金铸锭和铸件规范(溶液处理) Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3)
BS 3L 125-1970 镁-铝(10)-锌(0.5)-锰(0.3)合金铸锭和铸件规范(溶液处理和沉淀处理) Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)
BS 3L 51-1970 铝-硅(2.5)-铜(1.2)-镍(1.0)-镁(0.1)-铁(1.0)合金铸锭和铸件规范(沉淀热处理) Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
BS 3L 63-1971 铝-铜-(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金管规范(溶解和沉淀处理) Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 3L 78-1970 铝-硅(5)-铜(1.2)-镁(0.5)合金铸锭和铸件规范(固溶处理和热处理) Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
BS 3L 80-1985 铝-镁2.25%合金板材和带材规范(强度符号-0) Specification for sheet and strip of aluminium-21/4% magnesium alloy (temper designation-O)
BS 3L 81-1985 铝-镁2.25%合金板材和带材规范(强度符号-H16或H26) Specification for sheet and strip of aluminium-21/4% magnesium alloy (temper designation H16 or H26)
BS 3L 86-1971 铝-铜(2.5)-镁(0.3)合金冷锻实心铆钉用钢丝规范(直径不超过10mm) Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
BS 3SP 168-169-2002 航空航天用的编织橡胶绳组件的外用套管和组合金属丝 Ferrules and assembly wires for braided rubber cord assemblies for aerospace use
BS 4048 Pts.1 & 2-1966 复合金属丝绳索和纤维绳索规范.第1部分:复合绳索.第2部分:弹性绞索 Specification for combined wire and fibre ropes. Combined ropes. Spring lay ropes
BS 4193-10-1982 镶硬质合金刀具.第10部分:带可转位刀片和莫氏锥柄的端铣刀规范 Hardmetal insert tooling - Specification for end mills with indexable inserts and Morse taper shank
BS 4193-11-1983 镶硬质合金刀具.第11部分:带可转位刀片的平面铣刀尺寸规范 Hardmetal insert tooling - Specification for dimensions of face milling cutters with indexable inserts
BS 4193-12-1984 镶硬质合金刀具.第12部分:带可转位刀片的侧铣刀及端铣刀和切槽刀尺寸规范 Hardmetal insert tooling - Specification for dimensions of side and face milling and slotting cutters with indexable inserts
BS 4193-13-1998 硬质合金镶齿工具.第13部分:带圆角可转位硬质金属镶齿.部分圆柱型固定孔.尺寸 Hardmetal insert tooling - Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions
BS 4193-14-1997 镶硬质合金刀具.第14部分:可转位刀片用镗杆(圆柱柄刀夹)命名规范 Hardmetal insert tooling - Specification for designation of boring bars (tool holders with cylindrical shank) for indexable inserts
BS 4193-15-1986 镶硬质合金刀具.第15部分:无固定孔的可转位刮棱硬质合金刀片尺寸规范 Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with wiper edges but without fixing hole
BS 4193-16-1986 镶硬质合金刀具.第16部分:可转位刀片用柄式铣刀命名规范 Hardmetal insert tooling - Specification for designation of shank type milling cutters for indexable inserts
BS 4193-17-1989 镶硬质合金刀具.第17部分:可转位刀片用膛孔型铣刀命名规范 Hardmetal insert tooling - Specification for designation of bore type milling cutters for indexable inserts
BS 4193-18-1997 镶硬质合金刀具.第18部分:可转位刀片用膛杆尺寸规范 Hardmetal insert tooling - Specification for dimensions of boring bars for indexable inserts
BS 4193-18-1999 硬质合金刀具.可分刻度的镶嵌刀片的镗杆尺寸规范 Hardmetal insert tooling - Specification for dimensions of boring bars for indexable inserts
BS 4193-19-1993 镶硬质合金刀具.无固定孔的圆角的可转位陶瓷镶装刀片的尺寸规范 Hardmetal insert tooling - Specification for dimensions of indexable ceramic inserts with rounded corners without fixing hole
BS 4193-1993 镶硬质合金刀具.第19部分:无固定孔圆角可分度陶瓷刀片尺寸规范 Hardmetal insert tooling. Specification for dimensions of indexable ceramic inserts with rounded corners without fixing hole
BS 4193-2-1986 镶硬质合金刀具.第2部分:无固定孔的圆角可转位硬质合金(碳化物)刀片尺寸规范 Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole
BS 4193-20-1993 镶硬质合金刀具.第20部分:有固定孔圆角可转位陶瓷刀片尺寸规范 Hardmetal insert tooling - Specification for dimensions of ceramic inserts with rounded corners with fixing hole
BS 4193-21-1993 镶硬质合金刀具.第21部分:带可转位硬质合金镶刃的直柄钻头规范 Hardmetal insert tooling - Specification for cylindrical shanks with a parallel flat for drills with indexable inserts
BS 4193-22-1996 镶硬质合金刀具.第22部分:带断屑器的分度刀片近似切屑控制范围分类和设计 Hardmetal insert tooling - Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
BS 4193-3-1997 镶硬质合金刀具.第3部分:带圆柱圆定孔和圆角可分度硬质合金(碳化物)刀片尺寸规范 Hardmetal insert tooling - Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole
BS 4193-6-1997 镶硬质合金刀具.第6部分:可转位(多刃)刀片用旋转夹和仿形刀夹及卡盘命名规范 Hardmetal insert tooling - Specification for the designation of turning and copying tool holders and cartridges for indexable (throwaway) inserts
BS 4193-7-1999 硬质合金刀具.可转位刀片车削和仿形用单刃刀具夹.尺寸 Hardmetal insert tooling - Single point tool holders for turning and copying for indexable inserts - Dimensions
BS 4193-8-1997 镶硬质合金刀具.第8部分:可转位(多刃)刀用A 型卡盘尺寸规范 Hardmetal insert tooling - Specification for dimensions for type A cartridges for indexable (throwaway) inserts
BS 4193-9-1982 镶硬质合金刀具.第9部分:带可转位刀片和扁平直柄的端铣刀规范 Hardmetal insert tooling - Specification for end mills with indexable inserts and flatted parallel shank
BS 4290-1989 装饰或保护用银和银合金电镀层的规范方法 Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes
BS 4292-1-1989 金与金合金电镀层规定方法.第1部分:工程用金与金合金 Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for engineering purposes
BS 4292-2-1989 金和金合金电镀层规定方法.第2部分:装饰或保护用金和金合金 Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for decorative and protective purposes
BS 4300/10-1969 普通工程用锻造铝和铝合金规范(补充系列).第10部分:5454型冷拔管 Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) - 5454 Drawn tube
BS 4480-3-1993 滑动轴承.米制系列.第3部分:铜合金套管 Plain bearings: metric series - Copper alloy bushes
BS 4486-1980 混凝土预加应力用热轧和热轧并处理的高抗拉强度的合金钢筋规范 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
BS 4842-1984 凃用于外部建筑的铝合金挤压件、薄板材和预成型件上的液态有机涂层和液态有机涂层的规范 Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings
BS 4872-2-1976 不要求批准焊接工艺时焊工的鉴定考试规范.第2部分:铝及铝合金钨极惰性气体保护电弧焊或熔化极惰性气体保护 Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys
BS 4873-2004 铝合金窗 Aluminium alloy windows
BS 4A 169-2002 飞行器用铝合金螺栓(统一六角形和统一螺纹) Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft
BS 4A 170-1999 铝合金蘑菇头开槽螺栓(统一螺纹)规范 Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)
BS 4L 100-1993 锻铝和铝合金的检验、试验和验收程序 Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
BS 4L 56-1986 铝-2<1/4>%镁合金管规范(强度符号-O)(无缝管:液压试验)(壁厚不超过12mm) Specification for tube of aluminium-21/4% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
BS 4L 59-1985 铝-镁合金板材和带材规范(强度符号-H16或H2) Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26)
BS 4L 60-1985 铝-镁合金板材和带材规范(强度符号-H12或H22) Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22)
BS 4L 61-1985 铝-镁合金板材和带材规范(强度符号-0) Specification for sheet and strip of aluminium-manganese alloy (temper designation-O)
BS 5045-8-2000 可运输的气瓶.特殊便携的在15℃时最高达300巴充气压力的水容量为0.5L-15L的无缝铝合金气瓶规范 Transportable gas containers - Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15 °C for special portable application
BS 5117-2.6-1992 发动机浓缩冷却剂(防冻剂)腐蚀抑制试验.第2部分:防腐蚀性能试验方法.第6节:热传导条件下铸铝合金防腐蚀试验 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze') - Methods of test for corrosion inhibition performance - Test for corrosion of cast aluminium alloys under heat-transfer conditions
BS 5154-1991 铜合金球形阀、球形截流和止回阀、止回和闸阀规范 Specification for copper alloy globe, globe stop and check, check and gate valves
BS 5338-1976 工程用锌合金压模铸件实用规程 Code of practice for zinc alloy pressure die casting for engineering
BS 5383-1986 采用连续字符标记法的钢镍合金及钛合金管材标志与钢管颜色编码规范 Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes
BS 5599-1993 工程用铝及其合金强阳极氧化涂层规范 Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
BS 5600-3.6-1988 粉末冶金材料和制品.第3部分:烧结金属材料和制品（不包活硬质合金）试验方法.第6节:液体渗透率测定 Powder metallurgical materials and products - Methods of testing sintered metal materials and products, excluding hardmetals - Determination of fluid permeability
BS 5624-1978 化学加工用容器与设备衬里实用规程.铜和铜合金 Code of practice for the lining of vessels and equipment for chemical processes: copper and copper alloys
BS 5812-1-1979 滑动轴承材料.第1部分:整体轴承用铝合金规范 Materials for plain bearings - Specification for aluminium alloy for solid bearings
BS 5L 44-1985 铝-镁2(1/4)合金锻坯、棒材、挤压型材和锻件规范 Specification for forging stock, bars, extruded sections and forgings of aluminium-21/4% magnesium alloy
BS 6137-1982 锡铅合金电镀层规范 Specification for electroplated coatings of tin/lead alloys
BS 6161-11-1985 铝及铝合金阳极氧化镀层试验方法.第11部分:光电反射计测量总反射率 Methods of test for anodic oxidation coatings on aluminium and its alloys - Measurement of total reflectance using a photoelectric reflectometer
BS 6161-14-1987 铝及铝合金阳极氧化镀层试验方法.第14部分:红外反射率测定 Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of infra-red reflectance
BS 6161-18-1991 铝及铝合金阳极氧化镀层试验方法.第18部分:表面耐磨性测定 Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of surface abrasion resistance
BS 6161-1993 铝及其合金的阳极氧化镀层的试验方法.第19部分:图象清晰度的测定.仪器测定法 Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method
BS 6161-7-1984 铝及其合金阳极氧化镀层试验方法.第7部分:阳极氧化有色镀层的人造光耐光度加速测定法 Methods of test for anodic oxidation coatings on aluminium and its alloys - Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light
BS 6200-2.2-1993 铁、钢和其它黑色金属的抽样和分析.第2部分:抽样和样品制备.第2节:铁合金和其它合金添加剂抽样和样品制备方 Sampling and analysis of iron, steel and other ferrous metals - Sampling and sample preparation - Methods for ferroalloys and other alloying additives
BS 6200-3.1.4-1990 铁、钢和其他黑色金属抽样和分析.第3部分:分析方法.第1节:铝含量测定.第4小节:非合金钢:火焰原子吸收分光光 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Non-alloyed steel: flame atomic absorption spectrometric method
BS 6200-3.1.5-1985 铁、钢和其他黑色金属抽样与分析.第3部分:分析方法.第1节:铝含量测定.第5小节:铁硅合金:原子吸收光谱法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Ferrosilicon: atomic absorption spectrometric method
BS 6200-3.1.6-1991 铁、钢和其他黑色金属抽样与分析.第3部分:分析方法.第1节:铝含量测定.第6小节:永磁合金:体积法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Permanent magnet alloys: volumetric method
BS 6200-3.10.4-1985 铁、钢和其他黑色金属抽样与分析.第3部分:分析方法.第10节:铬含量测定.第4小节:铁铬合金和铁硅铬合金:电位 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of chromium - Ferrochromium and ferrosilicochromium: potentiometric method
BS 6200-3.11.1-1991 铁、钢和其他铁合金的抽样和分析.分析方法.钴的测定.钢和铸铁:分光光度测定法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel and cast iron: spectrophotometric method
BS 6200-3.12.2-1985 铁、钢和其他铁合金的抽样和分析.分析方法.铜的测定.钢和铸铁:分光光度测定法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of copper - Steel and cast iron: spectrophotometric method
BS 6200-3.12.5-1986 铁、钢和其他铁金属的抽样和分析.分析方法.铜的测定.永磁合金:容量法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of copper - Permanent magnet alloys: volumetric method
BS 6200-3.16.1-1986 铁、钢和其他铁金属的抽样和分析.分析方法.铅的测定.碳钢和低合金钢:重量法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of lead - Carbon steels and low alloy steels: gravimetric method
BS 6200-3.18.2-1985 铁、钢和其他铁合金的抽样和分析.分析方法.锰的测定.钢:分光光度测定法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of manganese - Steel: spectrophotometric method
BS 6200-3.18.3-1985 铁、钢和其他铁合金的抽样和分析.分析方法.锰的测定.铁锰合金和硅锰铁合金:电位滴定法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of manganese - Ferromanganese and ferrosilicomanganese: potentiometric method
BS 6200-3.19.1-1985 铁、钢和其他铁合金的抽样和分析.分析方法.钼的测定.钢和铸铁:光度分析法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of molybdenum - Steel and cast iron: photometric method
BS 6200-3.20.3-1985 铁、钢和其他铁合金的抽样和分析.分析方法.镍的测定.钢和铸铁:分光光度测定法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of nickel - Steel and cast iron: spectrophotometric method
BS 6200-3.22.3-1986 铁、钢和其他铁合金的抽样和分析.分析方法.氮的测定.钢:分光光度测定法(痕量) Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of nitrogen - Steel: spectrophotometric method (for trace amounts)
BS 6200-3.26.5-1985 铁、钢和其他黑色金属抽样与分析.第3部分:分析方法.第26节:硅含量测定.第5小节:铁硅合金、铁硅锰合金和铁硅 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of silicon - Ferrosilicon, ferrosilicomanganese and ferrosilicochromium: gravimetric method
BS 6200-3.32.4-1985 铁、钢和其他黑色金属抽样与分析.第3部分:分析方法.第32节:钛含量测定.第4小节:铁钛合金:体积法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of titanium - Ferrotitanium: volumetric method
BS 6200-3.33.3-1985 铁、钢和其他黑色金属抽样与分析.第3部分:分析方法.第33节:钨含量测定.第3小节:铁钨合金:称重法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Ferrotungsten: gravimetric method
BS 6200-3.34.4-1985 铁、钢和其他铁合金的抽样和分析.分析方法.钒的测定.钒铁:电位滴定法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of vanadium - Ferrovanadium: potentiometric method
BS 6200-3.8.5-1991 铁、钢和其他铁合金的抽样和分析.分析方法.碳的测定.铸铁和生铁：非化合碳测定用重量方法 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of carbon - Cast iron and pig iron: gravimetric method for the determination of non-combined carbon
BS 643-1970 浇制钢丝绳端头用白色合金锭规范 Specification for white metal ingots for capping steel wire ropes
BS 6480-1988 额定电压在33KV及以下的铅与铅合金护套浸渍纸绝缘的电缆规范 Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
BS 6496-1984 施加并焙固于铝合金的挤压材、板材和预成型材(外部建筑用)的粉末有机涂层和带有粉末有机涂层的铝合金挤压材 Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
BS 6582-2000 连续热浸铅合金(铅锡合金)镀层的冷轧扁平碳钢制品 Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
BS 6615-1996 金属和金属合金铸件的尺寸公差规范 Specification for dimensional tolerances for metal and metal alloy castings
BS 6669-1-1986 银和银合金电镀层的试验方法.第1部分:镀层厚度的测定 Methods of test for electroplated silver and silver alloy coatings - Determination of coating thickness
BS 6669-2-1986 银和银合金电镀层的试验方法.第2部分:粘合力试验 Methods of test for electroplated silver and silver alloy coatings - Adhesion tests
BS 6669-3-1989 银和银合金电镀层的试验方法.第3部分:残留盐的检测 Methods of test for electroplated silver and silver alloy coatings - Detection of residual salts
BS 6670-1-1986 金和金合金电镀层的试验方法.第1部分:镀层厚度的测定 Methods of test for electroplated gold and gold alloy coatings - Determination of coating thickness
BS 6670-4-1986 金和金合金电镀层的试验方法.第4部分:金含量的测定 Methods of test for electroplated gold and gold alloy coatings - Determination of gold content
BS 6670-5-1986 金和金合金电镀层的试验方法.第5部分:粘合力试验 Methods of test for electroplated gold and gold alloy coatings - Adhesion tests
BS 6675-1986 供水设备用供水阀门(铜合金)规范 Specification for servicing valves (copper alloy) for water services
BS 6721-10-1989 铜和铜合金的取样与分析.第10部分:用滴定法对铜合金中铬的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper alloys: titrimetric method
BS 6721-11-1989 铜和铜合金的取样与分析.第11部分:用燃烧滴定法对铜和铜合金中硫的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of sulphur in copper and copper alloys: combustion titrimetric method
BS 6721-4-1986 铜和铜合金的取样与分析.第4部分:采用火焰原子吸收分光光度法对铜与铜合金中铬的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6721-5-1986 铜和铜合金的取样与分析.第5部分:采用火焰原子吸收分光光度法对铜与铜合金中锌的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6721-6-1989 铜和铜合金的取样与分析.第6部分:用分光光度法对铜和铜合金中磷的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of phosphorus in copper and copper alloys by spectrophotometry
BS 6721-7-1989 铜和铜合金的取样与分析.第7部分:用重力分析法对铜合金中镍的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of nickel in copper alloys: gravimetric method
BS 6721-8-1989 铜和铜合金的取样与分析.第8部分:用滴定法对铜合金中镍的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of nickel in copper alloys: titrimetric method
BS 6721-9-1989 铜和铜合金的取样与分析.第9部分:用火焰原子吸收分光光度法对铜合金中铅的测定方法 Sampling and analysis of copper and copper alloys - Method for determination of lead in copper alloys by flame atomic absorption spectrophotometry
BS 6783-1-1986 镍、镍铁和镍合金的取样与分析.第1部分:采用火焰原子吸收光谱法对镍中银、铋、镉、钴、铜、铁、锰、铅和锌 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, bismuth, cadmium, cobalt, copper , iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry
BS 6783-10-1990 镍、镍铁和镍合金的取样与分析.第10部分:镍合金中铁含量的测定方法(重铬酸钾滴定法) Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of iron in nickel alloys (titrimetric method using potassium dichromate)
BS 6783-11-1990 镍、镍铁和镍合金的取样与分析.第11部分:镍合金钴含量的测定方法(六氰基高铁酸钠电位滴定法) Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of cobalt in nickel alloys (potentiometric titration method using potassium hexacyanoferrate (III))
BS 6783-12-1992 镍、镍铁和镍合金的取样与分析.第12部分:利用钼蓝分子吸收光谱测定法测定镍合金中磷的方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption spectrometry
BS 6783-13-1992 镍、镍铁和镍合金的取样与分析.第13部分:用磷钒钼分子吸收光谱法对镍、镍铁和镍合金中磷的测定方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of phosphorus in nickel, ferronickel and nickel alloys by phosphovanadomolybdate molecular absorption spectrometry
BS 6783-14-1994 镍、镍铁和镍合金取样和分析.采用姜黄分子吸收光谱法对镍和镍合金中硼总含量的测定方法. Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of total boron content of nickel, and nickel alloys by curcumin molecular absorption spectrometry
BS 6783-15-1994 镍.镍铁和镍合金的取样和分析.采用二安替比林基低甲烷分子吸收光谱法对镍合金中的钛合金含量的测定方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of titanium in nickel alloys by diantipyrylmethane molecular absorption spectrometry
BS 6783-2-1986 镍、镍铁和镍的合金取样与分析.第2部分:镍铁中镍的测定方法(丁二酮酚重力分析法) Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)
BS 6783-3-1986 镍、镍铁和镍合金的取样与分析.第3部分:采用火焰原子吸收光谱法镍铁中钴的测定方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry
BS 6783-4-1986 镍、镍铁和镍合金的取样与分析.第4部分:用电热原子吸收光谱测定法测定银、砷、铋、镉、铅、锑、硒、锡、碲 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium in nickel by electrothermal atomic absorption spectrometry
BS 6783-5-1986 镍、镍铁和镍合金的取样与分析.第5部分:感应电炉燃烧后用红外吸收法测定镍、镍铁和镍合金中碳的方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783-6-1986 镍、镍铁和镍合金的取样与分析.第6部分:硫化氢产生后用甲蓝分子吸收光谱测定法测定镍中硫的方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel by methylene blue molecular absorption spectrometry after generation of hydrogen sulphide
BS 6783-7-1986 镍、镍铁和镍合金的取样与分析.第7部分:感应电炉燃烧后用红外测定镍镍铁和镍合金中硫的方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783-8-1986 镍、镍铁和镍合金的取样与分析.第8部分:感应电炉燃烧后用碘滴定法测定镍、镍铁和镍合金中硫的方法 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by iodimetric titration after induction furnace combustion
BS 6783-9-1986 镍、镍铁和镍合金的取样与分析.第9部分:镍铁中硅的测定方法(重力分析法) Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silicon in ferronickel (gravimetric method)
BS 6878-1988 工业用高压开关设备和控制装置规范.充气式高压开关设备和控制装置用铸铝合金外壳 Specification for high-voltage switchgear and controlgear for industrial use - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
BS 6931-1988 铜和铜合金的术语词汇 Glossary of terms for copper and copper alloys
BS 6SP 4-2000 强度级别为880/1080MPa的带头平杆钻头式钢合金和耐腐蚀钢制销钉 Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 / 1080 MPa
BS 7252-10-1997 外科植物入用金属材料.第10部分:煅制钛5-铝2.5-铁合金规范 Metallic materials for surgical implants - Specification for wrought titanium 5-aluminium 2,5-iron alloy
BS 7252-11-1995 外科植入物用金属材料.第11部分:可锻钛6-铝7-铌合金规范 Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 7-niobium alloy
BS 7252-12-1997 外科植物入用金属材料.第12部分:煅制钴-铬-钼合金规范 Metallic materials for surgical implants - Specification for wrought cobalt-chromium-molybdenum alloy
BS 7252-13-1997 外科植入物用金属材料.外科植入用非合金钽规范 Metallic materials for surgical implants - Specification for unalloyed tantalum for surgical implant applications
BS 7252-3-1997 外科植入物用金属材料.锻制钛6-铝4-钒合金规范 Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 4-vanadium alloy
BS 7252-4-1997 外科植入物用金属材料.第4部分:钴-铬-钼铸造合金规范 Metallic materials for surgical implants - Specification for cobalt-chromium-molybdenum casting alloy
BS 7252-5-1994 外科植入物用金属材料.第5部分:可锻钴-铬-钨-镍合金规范 Metallic materials for surgical implants - Specification for wrought cobalt-chromium-tungsten-nickel alloy
BS 7252-6-1997 外科植入物用金属材料.可锻钴-镍-铬-钼合金规范 Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum alloy
BS 7252-7-1994 外科植入物用金属材料.第7部分:钴-铬-镍-钼-铁合金规范 Metallic materials for surgical implants - Specification for cobalt-chromium-nickel-molybdenum-iron alloy
BS 7252-8-1997 外科植入物用金属材料.可锻钴-镍-铬-钼-钨-铁合金规范 Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
BS 7254-5-1990 矫形外科植入物.第5部分:钴-铬-钼合金制铸件的生产规范 Orthopaedic implants - Specification for production of castings made of cobalt-chromium-molybdenum alloy
BS 7315-1990 充气高压开关设备和控制装置用锻铝和铝合金壳体规范 Specification for wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
BS 7438-1991 弹簧加载型钢和铜合金单盘压片止回阀规范 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 7455-1-1991 采用火焰原子吸收光谱法对镍合金的分析.一般要求和样件溶解 Analysis of nickel alloys by flame atomic absorption spectrometry - General requirements and sample dissolution
BS 7455-2-1991 采用火焰原子吸收光谱测定法对镍合金的分析.钴的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for the determination of cobalt
BS 7455-3-1991 采用火焰原子吸收光谱测定法对镍合金的分析.铬的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for the determination of chromium
BS 7455-4-1991 采用火焰原子吸收光谱测定法对镍合金的分析.铜的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for the determination of copper
BS 7455-5-1991 采用火焰原子吸收光谱测定法对镍合金的分析.铁的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for the determination of iron
BS 7455-6-1991 采用火焰原子吸收光谱测定法对镍合金的分析.锰的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for the determination of manganese
BS 7455-7-1992 用火焰原子吸收光谱测定法对镍合金的分析.第7部分:铝含量的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for determination of aluminium
BS 7455-8-1992 采用火焰原子吸收光谱法对镍合金的分析.第8部分:硅的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for determination of silicon
BS 7455-9-1994 采用火焰原子吸收光谱法对镍合金的分析.第9部分:钒含量的测定方法 Analysis of nickel alloys by flame atomic absorption spectrometry - Method for determination of vanadium
BS 7545-1991 从金属和合金腐蚀试样去除腐蚀制品的方法 Method for removal of corrosion products from corrosion test specimens of metals and alloys
BS 7745-1-1994 带有铜焊螺旋形硬质合金尖的端铣刀.直柄端铣刀尺寸 End mills with brazed helical hardmetal tips - Dimensions of end mills with parallel shank
BS 7745-2-1994 带有铜焊螺旋形硬质合金尖的端铣刀.锥柄端铣刀尺寸 End mills with brazed helical hardmetal tips - Dimensions of end mills with taper shank
BS 7839-1995 直柄实心硬质合金端铣刀.尺寸 Solid hardmetal end-mills with parallel shanks - Dimensions
BS 7L 37-1989 铝-铜-镁-硅-锰合金的整体冷锻制铆钉用金属线规范(用于溶解处理和自然老化状态)(直径不超过10mm)(铜4.4、镁 Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
BS 864-3-1975 铜和铜合金制毛细管与承压管管件.第3部分:聚乙烯管用承压管件 Capillary and compression tube fittings of copper and copper alloy - Compression fittings for polyethylene pipes
BS A 254, A 255 [...]-1976 规范.六角头钛合金螺栓160 000 lbf/inUP2 (1100 MPa) Specification - Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa)
BS A 254, A 255, A 256, A 257, A 258, A 259-1976 规范.六角头钛合金螺栓160 000 磅力/英寸(上标2)(1100MPa) Specification - Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa)
BS A 254-1976 160,000磅力/平方英寸(1100MPa)六角头钛合金螺栓规范 Specification - Hexagonal head titanium alloy bolts 160 000 lbf/in2 (1100 MPa)
BS A 266, A 267 [...]-1977 带高转距速度驱动凹槽的100 沉头钛合金螺栓160 000 lbf/inUP2 (1100 MPa)规范 Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) with Hi-torque speed drive recesses
BS A 266, A 267, A 268, A 269, A 270, A 271-1977 有高转矩快速旋入凹槽的160000lbf/in<上标2>(1100MPa)的100°埋头钛合金螺栓规范 Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) with Hi-torque speed drive recesses
BS A 266-1977 具有高扭矩速度引导槽的抗拉强度为160,000磅力/平方英寸(1100MPa)的100°沉头钛合金螺栓规范 Specification for 100 ° countersunk head titanium alloy bolts 160 000 lbf/in2 (1100 MPa) with Hi-torque speed drive recesses
BS A 299-1989 抗拉强度为1250MPa和具有MJ螺纹的合金钢凸头螺栓采办规范 Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads
BS A 300-1989 抗拉强度为1100MPa和具有MJ螺纹的合金钢螺栓采办规范 Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads
BS A 332-1999 航空航天用1100MPa强度的MJ螺纹钛合金螺栓.采购规范 Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa - Procurement specification
BS A 351-2000 镍合金实心铆钉.采购规范 Rivets, solid, in nickel alloy - Procurement specification
BS A 352-2000 钛或钛合金的实心铆钉.采购规范 Rivets, solid, in titanium or titanium alloy - Procurement specification
BS A 363-2000 强度等级为1550MPa耐热镍基合金MJ螺纹螺栓.采购规范 Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification
BS AU 50-2.5c-1996 轮胎和车轮.车轮和轮辋.乘用车全部用或部分用轻铸合金制造的道路车轮规范 Tyres and wheels - Wheels and rims - Specification for road wheels manufactured wholly or partly of cast light alloy for passenger cars
BS AU 50-2.6a-1983 轮胎和车轮.第2部分:车轮和轮辋.第6节:机动自行车和摩托车全部用或部分用轻质合金制造的道路车轮规范 Tyres and wheels - Wheels and rims - Specification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles
BS B 100-1992 锻造铜合金的检测,试验和验收程序 Procedure for inspection, testing and acceptance of wrought copper alloys
BS B 23-1991 铜-铝-镍-铁合金棒材、型材、锻坯和锻件规范 Specification for copper-aluminium-nickel-iron alloy rods, sections, forging stock and forgings
BS B 24-1991 铜-锡-磷合金棒材和型材规范 Specification for copper-tin-phosphorous alloy rods and sections
BS DD 139-1986 锌铝合金铸锭和铸件规范 Specification for zinc-aluminium alloy ingots and castings
BS DD CEN/TS 13547-2007 工业阀门.铜合金球阀 Industrial valves - Copper alloy ball valves
BS DD CEN/TS 14938-2-2006 铜和铜合金.测定铋含量.火焰原子吸收光谱测定法(FAAS) Copper and copper alloys - Determination of bismuth content - FAAS method
BS DD CEN/TS 15022-4-2007 铜和铜合金.测定锡含量.介质锡含量.火焰原子吸收光谱测定法(FAAS) Copper and copper alloys - Determination of tin content - Medium tin content - Flame atomic absorption spectrometry method (FAAS)
BS DD CEN/TS 15023-3-2007 铜和铜合金.测定镍含量.火焰原子吸收光谱测定法(FAAS) Copper and copper alloys - Determination of nickel content - Flame atomic absorption spectrometry method (FAAS)
BS DD CEN/TS 15025-2007 铜和铜合金.测定镁含量.火焰原子吸收光谱测定法(FAAS) Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS)
BS DD CEN/TS 15476-2006 肥料.用氏合金还原蒸馏法测定氮和氨态氮 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda
BS DD ENV 12908-1998 铅和铅合金.火花激发光学发射光谱测定法分析 Lead and lead alloys - Analysis by optical emission spectrometry (OES) with spark excitation
BS DD ENV 13800-2000 铅及铅合金.无铅基质分离的火焰原子吸收光谱分析法(FAAS)或感应耦合等离子体发射光谱分析法(ICP-ES) Lead and lead alloys - Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
BS DD ENV 14029-2001 铅及铅合金.铅矩阵分离后的火焰原子吸收光谱法(FAAS)或感应耦合等离子体发射光谱法(ICP-ES)分析 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
BS DD ENV 14138-2001 铅及铅合金.共沉淀法分离后用火焰原子吸收光谱法(FAAS)或感应耦合等离子体发射光谱法(ICP-ES)进行分析 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co-precipitation
BS DD IEC/PAS 62483-2007 测量锡和锡合金表面抛光的须晶生长用试验方法 Test method for measuring whisker growth on tin and tin alloy surface finishes
BS DD ISO/TS 13899-3-2006 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子体原子发射光谱法.钨含量的测定 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Determination of W content
BS DD ISO/TS 17576-2007 牙科学.汞齐合金的腐蚀试验 Dentistry - Corrosion tests for amalgam
BS EN 10016-1-1995 拉制和/或冷轧用非合金钢棒.一般要求 Non-alloy steel rods for drawing and/or cold rolling - General requirements
BS EN 10016-2-1995 拉制和/或冷轧用的非合金钢棒.一般用途钢棒的特定要求 Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for general purpose rod
BS EN 10016-3-1995 拉制和/或冷轧用的非合金钢棒.沸腾和沸腾代用低碳钢棒的特殊要求 Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for rimmed and rimmed substitute low carbon steel rod
BS EN 10016-4-1995 拉制和/或冷轧用非合金钢棒材.专用棒材的特殊要求 Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for rod for special applications
BS EN 10025-1-2004 非合金结构钢.一般交货技术条件 Hot rolled products of structural steels - General technical delivery conditions
BS EN 10025-2-2004 非合金结构钢.非合金结构钢的交货技术条件 Hot rolled products of structural steels - Technical delivery conditions for non-alloy structural steels
BS EN 10028-2-2003 挤压用钢制扁平制品.带规定高温特性的非合金钢和合金钢 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
BS EN 10028-4-2003 挤压用钢制扁平制品.带规定低温特性的镍合金钢 Flat products made of steels for pressure purposes - Nickel alloy steels with specified low temperature properties
BS EN 10051-1992 非合金钢和合金钢连续热轧的未涂覆板材、薄板材和带材规范.尺寸和形状公差 Specification for continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape
BS EN 10083-2-2006 淬硬钢和回火钢.非合金钢的交货技术条件 Steels for quenching and tempering - Technical delivery conditions for non alloy steels
BS EN 10083-3-2006 淬硬钢和回火钢.合金钢的交货技术条件 Steels for quenching and tempering - Technical delivery conditions for alloy steels
BS EN 10090-1998 内燃机用阀门钢和合金 Valve steels and alloys for internal combustion engines
BS EN 10095-1999 耐热钢和镍合金 Heat resisting steels and nickel alloys
BS EN 1011-4-2000 焊接.金属材料焊接的推荐规范.铝及铝合金的电弧焊接 Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys
BS EN 10184-2006 黑色金属材料化学分析.非合金钢铁中磷的测定.钼蓝光度法测定酸溶硅量 Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method
BS EN 10210-1-2006 非合金和细晶结构钢的热精加工空心型材.交货技术要求 Hot finished structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements
BS EN 10210-2-2006 细晶结构钢和非合金热轧空心型材.公差、尺寸和截面特性 Hot finished structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties
BS EN 10216-1-2002 承压用的无缝钢管.交付技术状态.规定了室温特性的非合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions
BS EN 10216-2-2002 承压用的无缝钢管.交付技术状态.规定了高温特性的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10216-3-2002 承压用的无缝钢管.交付技术状态.合金细晶粒钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
BS EN 10216-4-2002 承压用的无缝钢管.交付技术状态.规定了低温特性的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions
BS EN 10217-1-2002 承压用焊接钢管.交付技术状态.规定室温特性的非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties
BS EN 10217-2-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金电焊钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10217-3-2002 承压用的焊接钢管.交付技术状态.合金细晶粒钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
BS EN 10217-4-2002 承压用的焊接钢管.交付技术状态.规定了低温特性的非合金和合金电焊钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties
BS EN 10217-5-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金埋弧焊接钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10217-6-2002 承压用的焊接钢管.交付技术条件.规定了低温特性的非合金埋弧焊接钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties
BS EN 10219-1-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.交货技术要求 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements
BS EN 10219-2-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.公差、尺寸和局部特性 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties
BS EN 10223-1-1998 栏栅用钢丝和金属丝制品.锌和锌合金包覆的刺钢丝 Steel wire and wire products for fences - Zinc and zinc alloy coated steel barbed wire
BS EN 10224-2002 包括生活用水在内的含水液的输送用非合金钢管和配件.交货技术条件 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions
BS EN 10244-2-2001 钢丝及其制品.钢丝上的非有色金属涂层.锌和锌合金涂层 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc alloy coatings
BS EN 10248-1-1996 非合金钢热轧制板桩.第1部分:交付技术状态 Hot rolled sheet piling of non alloy steels - Technical delivery conditions
BS EN 10248-2-1996 非合金钢热轧板桩.第2部分 形状和尺寸公差 Hot rolled sheet piling of non alloy steels - Tolerances on shape and dimensions
BS EN 10249-1-1996 非合金钢冷成型板桩.第1部分:交付技术状态 Cold formed sheet piling of non alloy steels - Technical delivery conditions
BS EN 10249-2-1996 非合金钢冷成型板桩.第2部分:形状和尺寸公差 Cold formed sheet piling of non alloy steels - Tolerances on shape and dimensions
BS EN 10250-2-2000 一般工程用敞口钢模锻件.非合金质量特种钢 Open steel die forgings for general engineering purposes - Non-alloy quality and special steels
BS EN 10250-3-2000 一般工程用敞口钢模锻件.合金特种钢 Open steel die forgings for general engineering purposes - Alloy special steels
BS EN 10255-2004 焊接或加螺纹的非合金钢管.交货技术条件 Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
BS EN 10257-1-1998 电力电缆或通信电缆铠装用镀锌或锌合金非合金钢丝.地面电缆 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables
BS EN 10257-2-1998 电力电缆或通信电缆铠装用锌或锌合金涂覆非合金钢丝.海底电缆 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables
BS EN 10264-2-2002 钢丝和钢丝产品.绳索用钢丝.一般绳索用的冷拉非合金钢丝 Steel wire and wire products - Steel wire for ropes - Cold drawn non alloy steel wire for ropes for general applications
BS EN 10264-3-2002 钢丝和钢丝产品.绳索用钢丝.重型装置用圆形和异型非合金钢丝 Steel wire and wire products - Steel wire for ropes - Round and shaped non alloyed steel wire for high duty applications
BS EN 10269-1999 规定高温和/或低温性能的紧固件用钢及镍合金 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 10270-1-2001 金属弹簧用钢丝.获得专利的冷拉伸非合金弹簧钢丝 Steel wire for mechanical springs - Patented cold drawn unalloyed spring steel wire
BS EN 10294-1-2005 机制空心棒.技术交货条件.非合金和合金钢 Hollow bars for machining - Technical delivery conditions - Non alloy and alloy steels
BS EN 10296-1-2003 机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes
BS EN 10297-1-2003 机械和普通工程用无缝圆形钢管.技术交货条件.非合金和合金钢管 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes
BS EN 10302-2002 耐蠕变的钢，镍和钴合金 Creep resisting steels, nickel and cobalt alloys
BS EN 10335-2005 包装用钢.与人和动物消费用食品、产品或饮料接触的扁平钢制品.非合金电解铬/氧化铬镀钢 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
BS EN 10341-2006 以半成品状态交付的冷轧电气非合金和合金钢薄板材和带材 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
BS EN 1057-2006 铜和铜合金制品.卫生设备和水加热器的水和气体用无缝圆铜管 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
BS EN 1092-3-2004 法兰及其连接件.标注PN的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges
BS EN 1092-4-2002 法兰及其连接件.按PN标注的管道、阀门、配件和附件用圆形法兰.铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges
BS EN 1172-1997 铜和铜合金.建筑用薄板和带材 Copper and copper alloys - Sheet and strip for building purposes
BS EN 1173-1996 铜和铜合金.材料状态或回火符号 Copper and copper alloys - Material condition or temper designation
BS EN 1179-2003 锌和锌合金.初级锌 Zinc and zinc alloys - Primary zinc
BS EN 12020-1-2001 铝及铝合金.挤制合金EN AW-6060 和 EN AW-6063精密型材.检验和交付技术条件 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063: Technical conditions for inspection and delivery
BS EN 12020-2-2001 铝及铝合金.挤制合金EN AW-6060 和 EN AW-6063精密型材.尺寸和形状公差 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063: Tolerances on dimensions and form
BS EN 12060-1998 锌和锌合金.取样方法.规范 Zinc and zinc alloys - Method of sampling - Specifications
BS EN 1213-2000 建筑物阀门.建筑物内饮水供水用的铜合金断流阀.试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
BS EN 12163-1998 铜和铜合金.普通棒材 Copper and copper alloys - Rod for general purposes
BS EN 12164-1998 铜及铜合金.快削加工用杆材 Copper and copper alloys - Rod for free machining purposes
BS EN 12165-1998 铜和铜合金.已加工和未加工锻坯 Copper and copper alloys - Wrought and unwrought forging stock
BS EN 12166-1998 铜及铜合金.普通线材 Copper and copper alloys - Wire for general purposes
BS EN 12167-1998 铜及铜合金.通用型材和扁棒材 Copper and copper alloys - Profiles and rectangular bar for general purposes
BS EN 12168-1998 铜和铜合金.切削加工用空心棒 Copper and copper alloys - Hollow rod for free machining purposes
BS EN 12206-1-2004 颜料和清漆.建筑用铝和铝合金涂层.涂覆粉末制涂层 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder
BS EN 12258-1-1998 铝和铝合金.术语和定义.通用术语 Aluminium and aluminium alloys - Terms and definitions - General terms
BS EN 12258-2-2004 铝和铝合金.术语和定义.化学分析 Aluminium and aluminium alloys - Terms and definitions - Chemical analysis
BS EN 12258-3-2003 铝和铝合金.术语和定义.废料 Aluminium and aluminium alloys - Terms and definitions - Scrap
BS EN 12258-4-2004 铝和铝合金.术语和定义.铝工业残留物 Aluminium and aluminium alloys - Terms and definitions - Residues of the aluminium industry
BS EN 12288-2003 工业用阀.铜合金闸阀 Industrial valves - Copper alloy gate valves
BS EN 12373-1-2001 铝及铝合金.阳极氧化.规定铝装饰和保护用阳极氧化覆层的方法 Aluminium and aluminium alloys - Anodizing - Method for specifying decorative and protective anodic oxidation coatings on aluminium
BS EN 12373-10-1999 铝和铝合金.阳极氧化.使用磨损射流设备测定阳极氧化镀涂层主要特殊磨损抗性 Aluminium and aluminium alloys - Anodizing - Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
BS EN 12373-11-2001 铝和铝合金.阳极氧化.20°、45°、60°和85°角的阳极氧化覆层的镜面反射系数和镜面光泽度的测量 Aluminium and aluminium alloys - Anodizing - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 °, 45 °, 60 °, and 85 °
BS EN 12373-12-2001 铝和铝合金.阳极氧化.用集成球形仪器测量铝表面反射特性 Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
BS EN 12373-13-2001 铝和铝合金.阳极氧化.用角度光度计或滤色角度光度计测量铝表面反射特性 Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS EN 12373-14-2001 铝和铝合金.阳极氧化.阳极氧化层镜相清析的目视测定.表格刻度法 Aluminium and aluminium alloys - Anodizing - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
BS EN 12373-15-2001 铝和铝合金.阳极氧化.检查变形评估阳极氧化层耐裂性 Aluminium and aluminium alloys - Anodizing - Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN 12373-16-2001 铝及铝合金.阳极氧化.阳极氧化薄覆层连续性检查.硫酸铜试验 Aluminium and aluminium alloys - Anodizing - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
BS EN 12373-17-2001 铝及铝合金.阳极化.电介质击穿潜在性的测定 Aluminium and aluminium alloys - Anodizing - Determination of electric breakdown potential
BS EN 12373-18-2001 铝及铝合金.阳极氧化.斑蚀评定的等级系统.图表法 Aluminium and aluminium alloys - Anodizing - Rating system for the evaluation of pitting corrosion - Chart method
BS EN 12373-19-2001 铝及铝合金.阳极氧化.斑蚀评定的等级系统.坐标法 Aluminium and aluminium alloys - Anodizing - Rating system for the evaluation of pitting corrosion - Grid method
BS EN 12373-2-1999 铝和铝合金.阳极氧化.阳极氧化涂层单位面积(表面密度)质量的测定.重量剂法 Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
BS EN 12373-3-1999 铝和铝合金.阳极氧化.阳极氧化涂层单位面积(表面密度)质量的测定.分束显微镜无损测量 Aluminium and aluminium alloys - Anodizing - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
BS EN 12373-4-1999 铝和铝合金.阳极氧化.预先酸处理的染料污点密封试验的阳极氧镀层吸收强度损失评估 Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
BS EN 12373-5-1999 铝和铝合金.阳极氧化.通过导纳测量评估密封阳极氧化物镀层质量 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
BS EN 12373-6-1999 铝和铝合金.阳极氧化.测定未预先酸处理的浸入磷酸/铬酸溶液后质量损失以评估密封阳极氧化镀层质量 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
BS EN 12373-7-1999 铝和铝合金.阳极氧化.测定预先酸处理的浸入磷酸/铬酸溶液后质量损失评估密封阳极氧化镀层质量 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
BS EN 12373-8-1999 铝和铝合金.阳极氧化.有色阳极氧化镀层对紫外光和热的比较牢固度测定 Aluminium and aluminium alloys - Anodizing - Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
BS EN 12373-9-1999 铝和铝合金.阳极氧化.使用磨损轮磨损试验设备测定阳极氧化镀层磨损指数和磨损抗性 Aluminium and aluminium alloys - Anodizing - Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
BS EN 12384-1999 铜和铜合金.带材弹性弯曲极限值测定 Copper and copper alloys - Determination of spring bending limit on strip
BS EN 12392-2000 铝和铝合金.锻压产品.生产压力设备用产品专门要求 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
BS EN 12402-1999 铅和铅合金.分析用取样方法 Lead and lead alloys - Methods of sampling for analysis
BS EN 12420-1999 铜和铜合金.锻件 Copper and copper alloys - Forgings
BS EN 12421-1998 镁及镁合金.非合金镁 Magnesium and magnesium alloys - Unalloyed magnesium
BS EN 12438-1998 镁及镁合金.铸造阳极用镁合金 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
BS EN 12441-1-2002 锌及锌合金.化学分析.锌合金中铝的测定.滴定法 Zinc and zinc alloys - Chemical analysis - Determination of aluminium in zinc alloys - Titrimetric method
BS EN 12441-10-2005 锌和锌合金.化学分析.锌合金中铬和钛的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Determination of chromium and titanium in zinc alloys - Spectrophotometric method
BS EN 12441-11-2006 锌和锌合金.化学分析.锌合金中硅的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Determination of silicon in zinc alloys - Spectrophotometric method
BS EN 12441-2-2002 锌及锌合金.化学分析.锌合金中镁的测定.火焰原子吸收光谱法 Zinc and zinc alloys - Chemical analysis - Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
BS EN 12441-3-2002 锌及锌合金.化学分析.铅、镉、铜的测定.火焰原子吸收光谱法 Zinc and zinc alloys - Chemical analysis - Determination of lead, cadmium and copper - Flame atomic absorption spectometric method
BS EN 12441-4-2003 锌和锌合金.化学分析.锌合金中铁含量的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Determination of iron in zinc alloys - Spectrophotometric method
BS EN 12441-5-2003 锌和锌合金.化学分析.生锌中铁含量的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Determination of iron in primary zinc - Spectrophotometric method
BS EN 12441-6-2003 锌和锌合金.化学分析.铝及铁含量的测定.火焰原子吸收光谱测定法 Zinc and zinc alloys - Chemical analysis - Determination of aluminium and iron - Flame atomic absorption spectrometric method
BS EN 12441-7-2005 锌和锌合金.化学分析.锡的测定.萃取后的火焰原子吸收光谱测定法 Zinc and zinc alloys - Chemical analysis - Determination of tin - Flame atomic absorption spectrometric method after extraction
BS EN 12441-8-2005 锌和锌合金.化学分析.二级锌中锡的测定.火焰原子吸收光谱测定法 Zinc and zinc alloys - Chemical analysis - Detection of tin in secondary zinc - Flame atomic absorption spectrometric method
BS EN 12441-9-2005 锌和锌合金.化学分析.锌合金中镍的测定.火焰原子吸收光谱测定法 Zinc and zinc alloys - Chemical analysis - Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method
BS EN 12449-1999 铜和铜合金.普通无缝圆管 Copper and copper alloys - Seamless, round tubes for general purposes
BS EN 12450-1999 铜和铜合金.圆铜无缝毛细管 Copper and copper alloys - Seamless, round copper capillary tubes
BS EN 12451-1999 铜和铜合金.热交换器用圆无缝管 Copper and copper alloys - Seamless, round tubes for heat exchangers
BS EN 12452-1999 铜和铜合金.热交换器用轧制翅片无缝管 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
BS EN 12482-1-1998 铝和铝合金.通用重轧胚料.热轧重轧胚料规范. Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for hot rolled reroll stock
BS EN 12482-2-1998 铝和铝合金.通用重轧胚料.冷轧重轧胚料规范. Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for cold rolled reroll stock
BS EN 12487-2007 金属的腐蚀防护.铝和铝合金上经清洗和未清洗的铬酸盐转化涂层 Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
BS EN 12501-2-2003 金属材料的防腐蚀.土壤中腐蚀可能性.低合金和非合金黑色金属材料 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Low alloyed and non alloyed ferrous materials
BS EN 12502-2-2005 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.铜和铜合金的影响因素 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for copper and copper alloys
BS EN 12502-5-2005 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.铸铁、非合金和低合金钢的影响因素 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for cast iron, unalloyed and low alloyed steels
BS EN 12508-2000 金属和合金的腐蚀保护.表面处理,金属和其它无机涂层.术语 Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary
BS EN 12517-1-2006 焊缝的无损检验.用放射线照相术评定钢、镍、钛及其合金的焊接接缝.验收等级 Non-destructive testing of welds - Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
BS EN 12536-2000 焊料.非合金钢和抗蠕变钢气焊焊条.分类 Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification
BS EN 1254-1-1998 铜和铜合金.管路接头.铜管毛细管钎焊法或铜焊法用端头接头 Copper and copper alloys - Plumbing fittings - Fittings with ends for capillary soldering or capillary brazing to copper tubes
BS EN 1254-2-1998 铜和铜合金.管路接头.与铜管一起使用的压合接头 Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with copper tubes
BS EN 1254-3-1998 铜和铜合金.管路接头.与塑料管一起使用的压合接头 Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with plastics pipes
BS EN 1254-4-1998 铜和铜合金.管路接头.与带有毛细管或压力端头的其它端头连接的管接头 Copper and copper alloys - Plumbing fittings - Fittings combining other end connections with capillary or compression ends
BS EN 1254-5-1998 铜和铜合金.管路接头.铜管毛细管铜焊法用短端头接头 Copper and copper alloys - Plumbing fittings - Fittings with short ends for capillary brazing to copper tubes
BS EN 12548-1999 铅和合金.电缆护套和套筒用铅合金锭 Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves
BS EN 12588-2006 铅和铅合金.建筑用轧制薄铅板 Lead and lead alloys — Rolled lead sheet for building purposes
BS EN 12659-1999 铅和铅合金.铅 Lead and lead alloys - Lead
BS EN 12735-1-2001 铜和铜合金.空调和制冷用无缝圆铜管.管道系统用管 Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Tubes for piping systems
BS EN 12735-2-2001 铜和铜合金.空调和制冷用无缝圆铜管.设备用管 Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Tubes for equipment
BS EN 12844-1999 锌和锌合金.铸件.规范 Zinc and zinc alloys - Castings - Specifications
BS EN 12861-1999 铜及铜合金.废料 Copper and copper alloys - Scrap
BS EN 12862-2000 可运输气瓶.可反复灌装可运输焊接铝合金气瓶的设计和制造规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
BS EN 12893-2000 铜和铜合金.螺旋拉伸数测定 Copper and copper alloys - Determination of spiral elongation number
BS EN 12938-2000 锡铅合金分析方法.原子光谱法测定合金和杂质元素含量 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
BS EN 1301-1-1997 铝和铝合金.拉制丝材.检验和交付技术状态 Aluminium and aluminium alloys - Drawn wire - Technical conditions for inspection and delivery
BS EN 1301-2-1997 铝和铝合金.冷拉丝材.机械性能 Aluminium and aluminium alloys - Drawn wire - Mechanical properties
BS EN 1301-3-1997 铝和铝合金.拉制丝材.尺寸公差 Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions
BS EN 13086-2000 铅及铅合金.氧化铅 Lead and lead alloys - Lead oxides
BS EN 13147-2001 铜和铜合金.带材宽面上残余应力测定 Copper and copper alloys - Determination of residual stresses in the border area of a slit strip
BS EN 13148-2002 铜及铜合金.热浸镀锡的铜带材 Copper and copper alloys - Hot-dip tinned strip
BS EN 13195-1-2002 铝和铝合金.海上(造船业,海运和近海工程)用煅造和铸造产品.规范 Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Specifications
BS EN 13283-2002 锌和锌合金.再生锌 Zinc and zinc alloys - Secondary zinc
BS EN 13347-2002 铜和铜合金.焊接和钎焊用杆材和线材 Copper and copper alloys - Rod and wire for welding and braze welding
BS EN 13348-2001 铜和铜合金.医用气体或真空用无缝圆铜管 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
BS EN 13349-2002 铜和铜合金.带固体遮敝物的预绝缘铜管 Copper and copper alloys - Pre-insulated copper tubes with solid covering
BS EN 13445-8-2006 非受火压力容器.铝和铝合金压力容器附加要求 Unfired pressure vessels - Additional requirements for pressure vessels of aluminium and aluminium alloys
BS EN 13480-8-2007 金属工业管道.铝和铝合金管道附加要求 Metallic industrial piping - Additional requirements for aluminium and aluminium alloy piping
BS EN 13599-2002 铜和铜合金.电气用的铜厚板材、薄板材和带材 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
BS EN 13600-2002 铜和铜合金.电气用的无缝铜管 Copper and copper alloys - Seamless copper tubes for electrical purposes
BS EN 13601-2002 铜和铜合金.一般电气用的铜杆、铜棒和铜丝 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
BS EN 13602-2002 铜和铜合金.制造导电体用的拉拔圆铜丝线 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
BS EN 13603-2002 铜和铜合金.评估电气用的拉拔圆铜丝上锡覆层的试验方法 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
BS EN 13604-2002 铜和铜合金.电子管、半导体器件和真空设备用高电导率铜的制品 Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications
BS EN 13605-2002 铜和铜合金.电气用铜型材和成型的铜丝材 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
BS EN 13828-2003 建筑物用阀.建筑物内饮用水供给用手动铜合金及不锈钢球阀.试验及要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements
BS EN 1386-2007 铝和铝合金.踏板.规范 Aluminium and aluminium alloys - Tread plate - Specifications
BS EN 13920-1-2003 铝和铝合金.废料.一般要求、取样和试验 Aluminium and aluminium alloys - Scrap - General requirements, sampling and tests
BS EN 13920-10-2003 铝和铝合金.废料.铝制废饮料罐的废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of used aluminium beverage cans
BS EN 13920-11-2003 铝和铝合金.废料.铝铜散热器的废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of aluminium-copper radiators
BS EN 13920-12-2003 铝和铝合金.废料.单一合金的车床切屑 Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy
BS EN 13920-13-2003 铝和铝合金.废料.含两种或多种合金的混合车床切屑 Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys
BS EN 13920-14-2003 铝和铝合金.废料.废铝包装件 Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings
BS EN 13920-15-2003 铝和铝合金.废料.已去除废铝包装件中涂层的铝废料 Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings
BS EN 13920-16-2003 铝和铝合金.废料.浮渣、渣滓、疤皮和金属粒子的废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of skimmings, drosses, spills and metallics
BS EN 13920-2-2003 铝和铝合金.废料.非合金废铝 Aluminium and aluminium alloys - Scrap - Unalloyed aluminium scrap
BS EN 13920-3-2003 铝和铝合金.废料.废金属丝和电缆 Aluminium and aluminium alloys - Scrap - Wire and cable scrap
BS EN 13920-4-2003 铝和铝合金.废料.单一锻造合金的废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of one single wrought alloy
BS EN 13920-5-2003 铝和铝合金.废料.同一系列两种或多种锻造合金的废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys of the same series
BS EN 13920-6-2003 铝和铝合金.废料.含两种或多种锻造铝合金的废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys
BS EN 13920-7-2003 铝和铝合金.废料.铸件废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of castings
BS EN 13920-8-2003 铝和铝合金.废料.为实施铝分离加工，含粉碎加工产生的 非铁材料废料 Aluminium and aluminium alloys - Scrap - Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
BS EN 13920-9-2003 铝和铝合金.废料.从粉碎的非铁材料中分离出的铝废料 Aluminium and aluminium alloys - Scrap - Scrap from aluminium separation processes of non-ferrous shredded materials
BS EN 13957-2003 铝和铝合金.一般用途挤压圆形盘管.规范 Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification
BS EN 13958-2003 铝和铝合金.一般用途冷拉圆形盘管.规范 Aluminium and aluminium alloys - Cold drawn, round coiled tube for general applications - Specification
BS EN 1396-1997 铝及铝合金.一般用途的成卷包敷的薄板和带材规范 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
BS EN 13981-1-2003 铝和铝合金.结构性铁道制品.检验和交货技术条件.挤压制品 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Extruded products
BS EN 13981-2-2004 铝和铝合金.结构性轨道用制品.检验和交货技术条件.板材和薄板材 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Plates and sheets
BS EN 13981-3-2006 铝和铝合金.结构性铁路设施用产品.检验和交货用技术条件.铸件 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Castings
BS EN 13981-4-2006 铝和铝合金.结构性铁道设施用产品.检验和交货技术条件.锻制品 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Forgings
BS EN 14057-2003 铅和铅合金.碎片.术语和定义 Lead and lead alloys - Scraps - Terms and definitions
BS EN 1412-1996 铜和铜合金.欧洲牌号系统 Copper and copper alloys - European numbering system
BS EN 14121-2003 铝和铝合金.电工用铝薄板、带材和板材 Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications
BS EN 14242-2004 铝和铝合金.化学分析.感应耦合等离子体光学辐射光谱分析 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
BS EN 14286-2007 铝和铝合金.危险物品存储和运输用容器可焊接卷状产品 Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods
BS EN 14287-2004 铝和铝合金.包装和包装元件制造用产品的化学成分的具体要求 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
BS EN 14290-2004 锌和锌合金.二次原料 Zinc and zinc alloys - Secondary raw material
BS EN 14361-2004 铝和铝合金.化学分析.金属熔料抽样 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
BS EN 14436-2004 铜和铜合金.电镀锡带 Copper and copper alloys - Electrolytically tinned strip
BS EN 14532-1-2004 焊接消耗品.试验方法和质量要求.钢、镍和镍合金消耗品的基本方法和合格评定 Welding consumables - Test methods and quality requirements - Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
BS EN 14532-2-2004 焊接消耗品.试验方法和质量要求.钢、镍和镍合金耗材的补充方法和合格评定 Welding consumables - Test methods and quality requirements - Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys
BS EN 14532-3-2005 焊接消耗品.试验方法和质量要求.铝合金焊接用焊丝电极、焊丝和焊棒的合格评定 Welding consumables - Test methods and quality requirements - Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
BS EN 14640-2005 焊接消耗品.铜和铜合金熔焊用实心焊丝和焊棒.分类 Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
BS EN 14726-2005 铝和铝合金.化学分析.闪光光学发射光谱测定分析指南 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
BS EN 14935-2006 铜和铜合金.测定纯铜杂质.ETA-AAS法 Copper and copper alloys - Determination of impurities in pure copper - ETA-AAS method
BS EN 14936-1-2006 铜和铜合金.铝含量的测定.滴定法 Copper and copper alloys - Determination of aluminium content - Titrimetric method
BS EN 14936-2-2006 铜和铜合金.铝含量的测定.FAAS法 Copper and copper alloys - Determination of aluminium content - FAAS method
BS EN 14937-1-2006 铜和铜合金.锑含量的测定.分光光度测量法 Copper and copper alloys - Determination of antimony content - Spectrophotometric method
BS EN 14937-2-2006 铜和铜合金.锑含量的测定.FAAS法 Copper and copper alloys - Determination of antimony content - FAAS method
BS EN 14939-2006 铜和铜合金.测定铍含量.FAAS法 Copper and copper alloys - Determination of beryllium content - FAAS Method
BS EN 14940-2-2006 铜和铜合金.铬含量的测定.FAAS法 Copper and copper alloys - Determination of chromium content - FAAS method
BS EN 14941-2006 铜和铜合金.测定钴含量.FAAS法 Copper and copper alloys - Determination of cobalt content - FAAS method
BS EN 14942-2-2006 铜和铜合金.砷含量的测定.FAAS法 Copper and copper alloys - Determination of arsenic content - FAAS method
BS EN 14945-2005 耐火制品和材料.使用前后的铬合金耐火材料中铬(VI)的光谱测定法测定 Refractory products and materials - Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use
BS EN 14977-2006 铜和铜合金.抗拉应力的检测.5%氨试验 Copper and copper alloys - Detection of tensile stress - 5% ammonia test
BS EN 15022-3-2006 铜和铜合金.锡含量的测定.低锡含量.火焰原子吸收光谱测定法(FAAS) Copper and copper alloys - Determination of tin content - Low tin content - Flame atomic absorption spectrometry method (FAAS)
BS EN 15024-2-2006 铜和铜合金.锌含量的测定.第2部分:火焰原子吸收光谱法(FAAS) Copper and copper alloys - Determination of zinc content -Part 2: Flame atomic absorption spectrometry method (FAAS)
BS EN 1503-4-2002 阀门.阀体、阀帽和阀盖用材料.欧洲标准中规定的铜合金 Valves - Materials for bodies, bonnets and covers - Copper alloys specified in European Standards
BS EN 15063-1-2006 铜和铜合金.用波长色散X射线荧光光谱测定法(XRF)测定主要元素和杂质.常规方法指南 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Guidelines to the routine method
BS EN 15063-2-2006 铜和铜合金.用波长色散X射线荧光光谱测定法(XRF)测定主要元素和杂质.常规方法 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Routine method
BS EN 15079-2007 铜和铜合金.火花源发射光谱测定法(S-OES)分析 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
BS EN 15088-2005 铝和铝合金.施工作业用结构产品.检验和交付用技术条件 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
BS EN 1559-4-1999 铸造.交付技术状态.铝合金铸件的附加要求 Founding - Technical conditions of delivery - Additional requirements for aluminium alloy castings
BS EN 1559-5-1998 铸造.交货技术条件.镁合金铸件的附加要求 Founding - Technical conditions of delivery - Additional requirements for magnesium alloy castings
BS EN 1559-6-1999 铸造.交付技术状态.锌合金铸件附加要求 Founding - Technical conditions of delivery - Additional requirements for zinc alloy castings
BS EN 1592-1-1998 铝和铝合金.HF缝焊管.检验和交付技术状态 Aluminium and aluminium alloys - HF seam welded tubes - Technical conditions for inspection and delivery
BS EN 1592-2-1998 铝和铝合金.HF缝焊管.机械特性 Aluminium and aluminium alloys - HF seam welded tubes - Mechanical properties
BS EN 1592-3-1998 铝和铝合金.HF缝焊管.圆形管的尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for circular tubes
BS EN 1592-4-1998 铝和铝合金.HF缝焊管.正方形、矩形和异型管的尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes
BS EN 1597-1-1997 焊接用料.试验方法 .钢,镍和镍合金中所有焊接金属试样备制用的试件 Welding consumables - Test methods - Test piece for all-weld metal test specimens in steel, nickel and nickel alloys
BS EN 1652-1998 铜和铜合金.一般用途的板材、薄板材、带材和圆形材 Copper and copper alloys - Plate, sheet, strip and circles for general purposes
BS EN 1653-1998 铜和铜合金.锅炉、压力容器和热水保温装置用的板、薄板材和圆形材 Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
BS EN 1654-1998 铜和铜合金.弹簧和连接器用带材 Copper and copper alloys - Strip for springs and connectors
BS EN 1655-1997 铜和铜合金.符合性声明 Copper and copper alloys - Declarations of conformity
BS EN 1668-1997 焊接用料.非合金和细晶粒钢和钨极惰性气体保护用的焊条,焊丝和沉积物.分类 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification
BS EN 1669-1997 铝及铝合金试验方法.薄板材和带材的耳索试验 Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip
BS EN 1676-1997 铝及铝合金试验方法.再熔用的合金铸锭.规范 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
BS EN 1706-1998 铝及铝合金.铸件.化学成分和机械特性 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
BS EN 1715-1-1998 铝和铝合金.拉制坯料.检验和交货技术条件及一般要求 Aluminium and aluminium alloys - Drawing stock - General requirements and technical conditions for inspection and delivery
BS EN 1715-2-1998 铝和铝合金.绘图台.电气应用的特殊要求 Aluminium and aluminium alloys - Drawing stock - Specific requirements for electrical applications
BS EN 1715-3-1998 铝和铝合金.拉制坯料.机械用.特殊要求(不包括焊接) Aluminium and aluminium alloys - Drawing stock - Specific requirements for mechanical uses (excluding welding)
BS EN 1715-4-1998 铝和铝合金.拉制坯料.焊接用.特殊要求 Aluminium and aluminium alloys - Drawing stock - Specific requirements for welding applications
BS EN 1753-1997 镁和镁合金.镁合金铸模和铸件 Magnesium and magnesium alloys - Magnesium alloy ingots and castings
BS EN 1754-1997 镁和镁合金.镁和镁合金阳极、铸锭、铸件.设计系统 Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system
BS EN 1758-1998 铜及铜合金.引线框架用带材 Copper and copper alloys - Strip for lead frames
BS EN 1759-3-2004 法兰及其连接件.标注等级的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges
BS EN 1759-4-2003 法兰及其连接件.标注等级的管道、阀门、配件及附件用圆形法兰.铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges
BS EN 1774-1998 锌和锌合金.铸造用合金.铸锭和熔液 Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid
BS EN 1780-1-2002 铝和铝合金.再熔、母合金和铸件的非合金和合金铝锭的命名.数字命名系统 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Numerical designation system
BS EN 1780-2-2002 铝和铝合金.再熔、母合金和铸件用非合金和合金铝锭的命名.用化学符号表示命名系统 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Chemical symbol based designation system
BS EN 1780-3-2002 铝和铝合金.再熔、母合金和铸件的非合金和合金铝锭的命名.化学成份的书写规则 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Writing rules for chemical composition
BS EN 1802-2002 可运输储气瓶.无缝铝合金储气瓶的周期性检验和测试 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
BS EN 1904-2000 贵重金属.贵重金属珠宝合金适焊性 Precious metals - The finenesses of solders used with precious metal jewellery alloys
BS EN 1971-1999 铜和铜合金.管材的涡流试验 Copper and copper alloys - Eddy current test for tubes
BS EN 1975-2000 便携气体钢瓶.容量由0,5升到150升(包括150升)的由无缝铝和铝合金制气体瓶的设计和结构规范. Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre
BS EN 1976-1998 铜及铜合金.未定形铜铸件产品 Copper and copper alloys - Cast unwrought copper products
BS EN 1977-1998 铜及铜合金.铜拉制坯料(线杆材) Copper and copper alloys - Copper drawing stock (wire rod)
BS EN 1978-1998 铜及铜合金.铜阴极 Copper and copper alloys - Copper cathodes
BS EN 1981-2003 铜及铜合金.母合金 Copper and copper alloys - Master alloys
BS EN 1982-1999 铜和铜合金.铸锭和铸件 Copper and copper alloys - Ingots and castings
BS EN 2003-009-2007 航空航天系列.试验方法.钛和钛合金.表面污染测定 Aerospace series - Test methods - Titanium and titanium alloys - Determination of surface contamination
BS EN 2003-010-2007 航空航天系列.钛和钛合金.试验方法.抽样测定氢含量 Aerospace series - Titanium and titanium alloys - Test methods - Sampling for determination of hydrogen content
BS EN 2004-1-1993 铝和铝合金产品试验方法.第1部分:锻铝合金电导率的测定 Test methods for aluminium and aluminium alloy products - Determination of electrical conductivity of wrought aluminium alloys
BS EN 2004-5-1993 铝和铝合金产品试验方法.第5部分:复合半成品的包层厚度和铜扩散的测定 Test methods for aluminium and aluminium alloy products - Determination of cladding thickness and copper diffusion of clad semi-finished products
BS EN 2044-2001 航空航天系列.铝及铝合金拉制圆棒.公差等级h11.直径为4mm D 63mm.尺寸 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm D 63 mm - Dimensions
BS EN 2045-2001 航空航天系列.铝及铝合金拉制方棒.公差等级h11.厚度为6mm a 50mm.尺寸 Aerospace series - Square bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm a 50 mm - Dimensions
BS EN 2046-2001 铝及铝合金拉制六角形棒材.公差等级h11.对边宽度为7mm a 50mm.尺寸 Hexagonal bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm a 50 mm - Dimensions
BS EN 2047-2001 航空航天系列.带边的L形铝及铝合金挤压件.尺寸 Aerospace series - Beaded L-section extruded, in aluminium and aluminium alloys - Dimensions
BS EN 2048-2001 航空航天系列.铝合金L形挤压型材.尺寸 Aerospace series - Extruded L-section in aluminium alloys - Dimensions
BS EN 2049-2001 航空航天系列.U形铝及铝合金挤压件.尺寸 Aerospace series - Extruded channel section, in aluminium alloys - Dimensions
BS EN 2050-2001 航空航天系列.T形铝及铝合金挤压件.尺寸 Aerospace series - Extruded T-section, in aluminium alloys - Dimensions
BS EN 2066-2002 航空航天系列.铝合金挤制型材.一般公差 Aerospace series - Extruded section in aluminium alloys - General tolerances
BS EN 2070-1-1991 铝和铝合金锻制品规范.技术规范.一般要求 Specification for aluminium and aluminium alloy wrought products - Technical specification - General requirements
BS EN 2070-2-1991 铝和铝合金锻制品规范.技术规范.薄板材、带成形的型材和中厚板材 Specification for aluminium and aluminium alloy wrought products - Technical specification - Sheet, strip formed profiles and plate
BS EN 2070-3-1991 铝和铝合金锻制品规范.技术规范.棒材和型材 Specification for aluminium and aluminium alloy wrought products - Technical specification - Bar and section
BS EN 2070-4-1991 铝和铝合金锻制产品规范.技术规范.结构管材 Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube for structures
BS EN 2070-5-1991 铝和铝合金锻制品规范.技术规范.承压用的管材 Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube used under pressure
BS EN 2070-6-1991 铝和铝合金锻制品规范.技术规范.铆钉丝材 Specification for aluminium and aluminium alloy wrought products - Technical specification - Rivet wire
BS EN 2070-7-1991 铝和铝合金锻制品规范.技术规范.锻坯 Specification for aluminium and aluminium alloy wrought products - Technical specification - Wrought forging stock
BS EN 2071-2002 航空航天系列.铝及铝合金板.厚度为0.25mm a 6mm.尺寸 Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0,25 mm a 6 mm - Dimensions
BS EN 2072-2005 航空航天系列.AL-P1050A-H14型铝合金.薄板材和带材.0.4mm≤a≤6mm Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm <= a <= 6 mm
BS EN 2076-1-1991 铝和镁合金铸锭和铸件.技术规范.一般要求 Aluminium and magnesium alloy ingots and castings - Technical specification - General requirements
BS EN 2076-2-1991 铝和镁合金铸锭和铸件.技术规范.重熔用的铸锭 Aluminium and magnesium alloy ingots and castings - Technical specification - Ingots for remelting
BS EN 2076-3-1991 铝和镁合金铸锭和铸件.技术规范.预生产铸件和生产铸件 Aluminium and magnesium alloy ingots and castings - Technical specification - Pre-production and production castings
BS EN 2082-1-1991 铝合金锻坯和锻件规范.技术规范.一般要求 Specification for aluminium alloy forging stock and forgings - Technical specification - General requirements
BS EN 2082-2-1991 铝合金锻坯和锻件规范.技术规范.锻坯 Specification for aluminium alloy forging stock and forgings - Technical specification - Forging stock
BS EN 2082-3-1991 铝合金锻坯和锻件规范.技术规范.试生产锻件和生产锻件 Specification for aluminium alloy forging stock and forgings - Technical specification - Pre-production and production forgings
BS EN 2083-2001 航空航天系列.电缆用铜及铜合金导体.产品标准 Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard
BS EN 2084-2005 航空航天系列.单芯、通用、带铜或铜合金导体的电缆.技术规范 Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification
BS EN 2085-2005 航空航天系列.铝合金AL-P2618A-T6.手锻和模锻件.a150 mm Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a 150 mm
BS EN 2086-2005 航空航天系列.铝合金AL-P2618A-T851.手锻和模锻.a150 mm Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a 150 mm
BS EN 2087-2005 航空航天系列. 铝合金ALP2014A.T6 或 T62型.0.4 mm <= a <= 6 mm的层覆薄板材和带材 Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet & strip 0,4 mm <= a <= 6 mm
BS EN 2088-2005 航空航天系列.AL-P2014A-T4型或AL-P2014A-T42型铝合金.覆层薄板材和带材.0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm <= a <= 6 mm
BS EN 2089-2005 AL-P2014A T6或T62铝合金.0.4mm-6mm的薄板及带材 Aluminium alloy AL-P2014A T6 or T62 - Sheet and strip - 0,4 mm a 6 mm
BS EN 2090-2005 铝合金AL-P2024-T3.覆层薄板和带材.0.3 mm≤a≤6 mm Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0,3 mm a 6 mm
BS EN 2092-2005 航空航天系列.铝合金AL-P7075.T6或T62.覆层铝合金板材及带材.0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm
BS EN 2093-1992 AL-P 7009-T74铝合金.20mm≤a≤150mm手工锻件 Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm a 150 mm
BS EN 2094-1992 AL-P 7009-T74铝合金.3mm≤a≤150mm模锻件 Aluminium alloy AL-P7009-T74 - Die forgings 3 mm a 150 mm
BS EN 2100-1992 AL-P2014A-T4511铝合金.a或D≤200mm的挤压棒材和型材 Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D 200 mm
BS EN 2101-1991 铝合金和锻铝合金铬酸阳极化规范 Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
BS EN 2103-1-1992 钢、镍基合金及钴基合金重熔坯料和铸件.技术规范.一般要求 Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - General requirements
BS EN 2103-2-1992 钢、镍基合金及钴基合金重熔坯料和铸件.技术规范.重熔坯料 Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Remelting stock
BS EN 2103-3-1992 钢、镍基合金及钴基合金重熔坯料和铸件.技术规范.试制铸件和产品铸件 Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Pre-production and production castings
BS EN 2122-1996 经阳极电镀或铬酸盐处理的扁平铝合金垫圈 Washers, flat, in aluminium alloy, anodized or chromated
BS EN 2126-1992 AL-P7075-T651铝合金.6mm≤a≤80mm板材 Aluminium alloy AL-P7075-T651 - Plate 6 mm a 80 mm
BS EN 2127-1992 AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材 Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D 100 mm
BS EN 2128-1992 AL-P7075-T7351铝合金.6mm≤a或D≤75mm拉制棒材 Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm a or D 75 mm
BS EN 2131-2002 航空航天系列.铝合金板.厚度6mm < a> 160mm.尺寸 Aerospace series - Plates in aluminium alloys - Thickness 6 mm a 160 mm - Dimensions
BS EN 2133-1998 具有规定拉力强度(LE)1450 MPa的钢、铜、铜合金和镍合金的镉镀层 Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys
BS EN 2134-2002 航空航天系列.铝及铝合金挤制圆棒.直径为10mm D 220mm.尺寸 Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm D 220 mm - Dimensions
BS EN 2144-1994 铝合金2117通用头型实心铆钉.英制系列 Rivets, solid, universal head, in aluminium alloy 2117, inch based series
BS EN 2145-1994 英制系列的阳极氧化或铬酸盐处理的2117号铝合金通用头实心铆钉 Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
BS EN 2149-1996 经阳极电镀或铬酸盐处理的5056A型铝合金通用头型实心铆钉.英制系列 Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN 2236-1992 合金钢紧公差钉体带头销钉.技术规范 Pins, headed, close tolerance shank, in alloy steel - Technical specification
BS EN 2256-2005 航空航天系列.铝合金AL-P2618A-T852.手锻和模锻.a150 mm Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a 150 mm
BS EN 2257-1997 铝和铝合金结构用圆管.直径为6mmD100mm.厚度为1mma6mm.尺寸 Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm D 100 mm - Thickness 1 mm a 6 mm - Dimensions
BS EN 2258-1997 铝和铝合金流体用圆管.直径为3.2mmD100mm.厚度为0.5mma2.5mm.尺寸 Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm D 100 mm - Thickness 0,6 mm a 2,5 mm - Dimensions
BS EN 2264-1996 二硫化钼润滑的镀镉合金钢加大承窝安装的双耳浮动自锁托板螺母.等级:900MPa(室温)/235℃ Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS2 lubricated - Classification: 900 MPa (at ambient temperature) /235 °C
BS EN 2284-1991 铝合金和锻铝合金硫酸阳极化规范 Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
BS EN 2285-1990 带自润滑内衬的铝合金普通套管规范.尺寸和负荷 Specification for bushes plain, aluminium alloy with self-lubricating liner - Dimensions and loads
BS EN 2286-1990 带自润滑内衬的铝合金带法兰缘的套管规范.尺寸和负荷 Specification for bushes flanged, aluminium alloy with self-lubricating liner - Dimensions and loads
BS EN 2289-1996 飞行控制用铝合金拉杆.技术规范 Rod bodies in aluminium alloy for flight controls - Technical specification
BS EN 2290-1-1998 飞行控制可调节终端配合铝合金杆.尺寸和荷载 Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Dimensions and loads
BS EN 2318-1992 AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm的挤压棒材和型材 Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm
BS EN 2326-1992 AL-P6082-T6铝合金.a或D≤200mm的挤压棒材和型材 Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm
BS EN 2327-2006 航空航天系列.飞行操纵杆用镉镀金合金钢制的径向锯齿锁紧垫圈.尺寸 Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods - Dimensions
BS EN 23312-1993 绕结金属材料和硬质合金.杨氏模量的测定 Sintered metal materials and hardmetals - Determination of Young modulus
BS EN 23326-1993 硬质合金.矫顽力（磁化强度）的测定 Specification for hardmetals - Determination of (the magnetization) coercivity
BS EN 23327-1993 硬质合金.横向断裂强度的测定 Hardmetals - Determination of transverse rupture strength
BS EN 2334-1997 铝和铝合金铬硫酸液 Chromic-sulphuric acid pickle of aluminium and aluminium alloys
BS EN 23369-1993 密封烧结金属材料和硬质合金.密度的测定 Impermeable sintered metal materials and hardmetals - Determination of density
BS EN 2338-2001 航空航天系列.热轧钛和钛合金薄板材.厚度为0.8mm 6mm.尺寸 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm - Dimensions
BS EN 2339-2001 航空航天系列.冷轧钛和钛合金薄板材.厚度为0.2mm a 6mm.尺寸 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm a 6 mm - Dimensions
BS EN 2344-2001 航空航天系列.耐热合金制的圆形棒材.直径大于10mm小于180mm.尺寸 Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm D 180 mm - Dimensions
BS EN 2365-1989 铝合金轴环规范 Specification for collars, aluminium alloy
BS EN 2381-1992 AL-P7009-T7452铝合金.40mm≤a≤150mm的手工锻件 Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm a 150 mm
BS EN 2384-1992 AL-P2014-T6511铝合金.a或D≤150mm的挤压棒材和型材 Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D 150 mm
BS EN 2385-1992 AL-P7009-T74511铝合金.a或D≤125mm的挤压棒材和型材 Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm
BS EN 23878-1993 硬质合金.维氏硬度试验 Hardmetals - Vickers hardness test
BS EN 23908-1993 硬质合金.不溶性(游离)碳含量的测定.重量分析法 Hardmetals - Determination of insoluble (free) carbon content - Gravimetric method
BS EN 23909-1994 硬质合金.钴含量测定.电位滴定法 Hardmetals - Determination of cobalt - Potentiometric method
BS EN 2395-2005 航空航天系列.AL-P2014A-T4或T42铝合金.0.4mm≤a≤6mm 薄板和带材 Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm
BS EN 2413-1995 镀镉的合金钢短螺纹紧公差薄六角头带肩螺栓.等级:1100MPa(室温)/235℃ Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 2422-2005 铝合金AL-P2124-T351.板材.25 mm≤a≤120 mm Aluminium alloy AL-P2124-T351 - Plate - 25 mm a 120 mm
BS EN 2437-2002 航空航天系列.铝及铝合金的铬酸盐转化涂层(黄色) Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
BS EN 24492-1993 硬质合金粉末以外的金属粉末.压实与绕结尺寸变化的测定 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
BS EN 24499-1993 硬质合金规范.显微组织的金相测定 Specification for hardmetals - Metallographic determination of microstructure
BS EN 24501-1994 硬质合金.钛含量测定.过氧化物光度法 Hardmetals - Determination of titanium - Photometric peroxide method
BS EN 24503-1993 硬质合金.用X射线荧光分析法对金属元素含量的测定.熔化法 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
BS EN 24505-1993 硬质合金规范.空隙度和游离碳的金相测定 Specification for hardmetals - Metallographic determination of porosity and uncombined carbon
BS EN 24506-1993 硬质合金规范.压缩试验 Specification for hardmetals - Compression test
BS EN 2486-2005 航天航空系列.AL-P2618A 型铝合金.锻坯件 Aerospace series - Aluminium alloy AL-P2618A - Forging stock
BS EN 24883-1993 硬质合金规范.用X射线荧光分析法对金属元素含量的测定.溶液法 Specification for hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method
BS EN 24884-1993 硬质合金.用烧结试块的粉末取样和试验 Hardmetals - Sampling and testing of powders using sintered test pieces
BS EN 2497-1990 钛与钛合金干喷砂规范 Specification for dry abrasive blasting of titanium and titanium alloys
BS EN 2511-2005 铝合金AL-P7075-T7351.板材.6 mm≤a≤100 mm Aluminium alloy AL-P7075-T7351 - Plate - 6 mm a 100 mm
BS EN 2516-1997 耐腐蚀钢的钝化和镍基合金的纯化 Passivation of corrosion resisting steels and decontamination of nickel base alloys
BS EN 2536-1995 铝合金的硬阳极氧化 Hard anodizing of aluminium alloys
BS EN 2545-1-1995 钛和钛合金重熔料和铸件.技术规范.通用要求 Titanium and titanium alloy remelting stock and castings - Technical specification - General requirements
BS EN 2545-2-1995 钛和钛合金重熔料和铸件.技术规范.第2部分:重熔料 Titanium and titanium alloy remeling stock and castings - Technical specification - Remelting stock
BS EN 2545-3-1995 钛和钛合金重熔料和铸件.交付技术状态.第3部分:预生产铸件和生产铸件 Titanium and titanium alloy remelting stock and castings - Technical specification - Pre-production and production castings
BS EN 2551-1993 2117型铝合金制100°标准埋头圆顶实心铆钉.英制系列 Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 2117, inch based series
BS EN 2552-1993 经阳极氧化或铬酸盐表面处理的2117型铝合金制100°标准埋头圆顶实心铆钉.英制系列 Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
BS EN 2553-1993 2017A型铝合金制100°标准埋头圆顶实心铆钉.英制系列 Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
BS EN 2555-1993 5056A型铝合金制100°标准埋头圆顶实心铆钉.英制系列 Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
BS EN 2556-1993 经阳极氧化或铬酸盐表面处理的5056A型铝合金制100°标准埋头圆顶实心铆钉.英制系列 Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN 2583-1997 耐热镍基合金NI-PH2601(铬镍铁合金718)MJ螺纹螺栓.等级:1275MPa(室温)/650℃.技术规范 Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C - Technical specification
BS EN 2599-2001 航空航天系列.铝和铝合金带材.厚度0.25mm,3.2mm.尺寸 Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3.2 mm - Dimensions
BS EN 2609-1989 铜锌合金的操纵缆索的转动圆套筒规范.尺寸和负荷 Specification for turnbarrels, control cable in copper-zinc alloys - Dimensions and loads
BS EN 2617-2001 航空航天系列.钛和钛合金板材.厚度6mm< a> 100mm.尺寸 Aerospace Series - Plates in titanium and titanium alloys - Thickness 6 mm a 100 mm - Dimensions
BS EN 2622-2001 航空航天系列.流体用耐热合金制的圆形管材.直径为3.2mm 100mm.尺寸 Aerospace Series - Circular tubes, for fluids in heat resisting alloys - Diameter 3,2 mm D 100 mm - Dimensions
BS EN 2630-1994 AL-P7009-T74511铝合金.对周边粗晶粒控制的a或D为125mm 挤压棒材和型材 Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm with peripheral coarse grain control
BS EN 2632-2005 航空航天系列.铝合金AL-P7075.T73511.挤压棒材和型材.周边粗晶粒控制a或 D <= 150mm Aerospace series - Aluminim alloy AL-P7075 - T73511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control
BS EN 2633-1994 铝合金AL-P2024-T3511.对周边粗晶粒控制的1,2 mm 或D≤150mm挤压棒材和型材. Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm with peripheral coarse grain control
BS EN 2635-2005 航空航天系列.铝合金AL-P2014A.T6511.挤压棒材和型材.a/D≤200mm周边粗粒控制 Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D <= 200 mm with peripheral coarse grain control
BS EN 2636-1994 铝合金AL-P6082-T6.对周边粗晶粒控制的挤压棒材和型材.a或D≤200mm, Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm with peripheral coarse grain control
BS EN 2648-1995 镀镉合金钢凹形垫圈 Washers, concave, in alloy steel, cadmium plated
BS EN 2649-1995 镀镉合金钢螺纹至螺钉头的带槽盘头螺钉.等级:900MPa(室温)/235℃ Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 °C
BS EN 26501-1992 铁镍合金.规范和交货要求 Ferronickel - Specification and delivery requirements
BS EN 2652-1997 镀镉合金钢制头部加螺纹的100°标准埋头开槽螺钉.等级:900MPa(室温)/235℃ Screws, 100 ° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2680-2006 航空航天系列.MoS2润滑镉镀层铝合金双耳游动自调自锁托板螺母.等级:900MPa(室温)/235℃ Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
BS EN 2681-2005 航空航天系列.铝合金AL-P7010-T74.手锻和模锻.a150 mm Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a 150 mm
BS EN 2684-2005 航空航天系列.铝合金AL-P7010-T7651.板材.6mma140mm Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm a 140 mm
BS EN 2687-2005 航空航天系列.铝合金AL-P7010-T7451.板材.6mma160mm Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm a 160 mm
BS EN 2693-2005 航空航天系列.AL-P5086-H111铝合金.0.3mm≤a≤6mm 薄板和带材 Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip . 0,3 mm a 6 mm
BS EN 2694-2005 航空航天系列.AL-P6061-T6或T62铝合金.0.4mm≤a≤6mm 薄板和带材 Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm
BS EN 2695-2005 航空航天系列.AL-P6081-T6铝合金.0.3mm≤a≤6mm薄板和带材 Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip . 0,3 mm a 6 mm
BS EN 2696-2005 航空航天系列.AL-P7075-T6或T62铝合金.0.4mm≤a≤6mm 薄板和带材 Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm
BS EN 2702-2005 航空航天系列.铝合金.AL-P6061.T6或T62.拉拔或挤压棒材和型材.a/D≤200mm Aerospace series - Aluminium alloy - AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D <= 200 mm
BS EN 2703-2005 铝合金AL-P2024-T4或T42.覆层薄板和带材.0.3 mm≤a≤6 mm Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm a 6 mm
BS EN 2731-2005 航空航天系列.镁合金钢MG-C46001 - T6.砂型铸造 Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting
BS EN 2732-2005 镁合金MG-C46001-T6.冷型铸造 Magnesium alloy MG-C46001-T6 - Chill casting
BS EN 2753-1996 二硫化钼润滑的镀镉合金钢的承窝安装的单耳固定自锁托板螺母.等级:1100MPa(室温)/235℃ Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification - 1100 MPa (at ambient temperature) / 235 °C
BS EN 27627-1-1993 硬质合金.火焰原子吸收光谱法化学分析.第1部分:一般要求 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - General requirements
BS EN 27627-3-1993 硬质合金.用火焰原子吸收光谱法进行化学分析.0.01-0.5%(m/m)含量中钴、铁、锰和镍的测定 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)
BS EN 27627-4-1993 硬质合金.用火焰原子吸收光谱法进行化学分析.0.01-0.5%(m/m)含量中钼、钛和钒的测定 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)
BS EN 27627-5-1993 硬质合金.用火焰原子吸收光谱法进行化学分析.0.5-2%(m/m)含量中钴、铁、锰、钼、镍、钛和钒的测定 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)
BS EN 27787-3-1992 牙科用旋转器械规范.切割刀具.第3部分:铣床用硬质合金实验室刀具 Specification for dental rotary instruments - Cutters - Carbide laboratory cutters for milling machines
BS EN 2802-2005 铝合金AL-P7475-T761.薄板和带材.0.6 mm≤a≤6 mm Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm a 6 mm
BS EN 2803-2005 航空航天系列.铝合金AL-P7475-T761.覆层薄板和带材.1.0 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm
BS EN 2808-1997 钛和钛合金阳极氧化处理 Anodizing of titanium and titanium alloys
BS EN 2858-1-1994 钛和钛合金坯料和锻件技术规范.第1部分:一般要求 Titanium and titanium alloys - Forging stock and forgings - Technical specifications - General requirements
BS EN 2858-2-1994 钛和钛合金坯料和锻件技术规范.第2部分:锻坯 Titanium and titanium alloys - Forging stock and forgings - Technical specification - Forging stock
BS EN 2858-3-1994 钛和钛合金坯料和锻件技术规范.第3部分:预行生产锻件和生产锻件 Titanium and titanium alloys - Forging stock and forgings - Technical specifications - Pre-production and production forgings
BS EN 2859-2006 航空航天系列.镀镉合金钢短螺纹紧公差标准螺杆标准六角头螺栓.等级:1100MPa(室温)/235℃ Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 286-4-1995 装空气或氮气用的不点火加热的一般压力容器.第4部分:用于铁路运输车辆空气制动和辅助气动设备的铝合金压力 Simple unfired pressure vessels designed to contain air or nitrogen - Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
BS EN 28654-1993 金合金的颜色.定义、颜色范围和命名 Colours of gold alloys - Definition, range of colours and designation
BS EN 2870-1996 二硫化钼润滑的阳极化的钛合金短螺纹紧公差标准螺杆标准双六角头螺栓.等级:1100MPa(室温)/315℃ Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) /315 °C
BS EN 2874-1996 钝化处理的耐热镍基合金中长度螺纹紧公差标准螺杆的大双六角头螺栓.等级:1550MPa(室温)/315℃ Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature) /315 °C
BS EN 2884-1996 二硫化钼润滑的阳极化钛合金短螺纹大公差标准螺杆斜十字槽盘头螺钉.等级:1100MPa(室温)/315℃ Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
BS EN 2885-1996 镀镉合金钢制短螺纹大公差标准螺杆斜十字槽盘头螺钉.等级:900MPa(室温)/235℃ Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2886-1996 镀镉的合金钢制短螺纹紧公差标准螺杆斜十字槽盘头螺钉.等级:900MPa(室温)/235℃ Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 °C
BS EN 2897-1996 镀镉的合金钢短螺纹紧公差标准螺杆斜十字槽盘头螺钉.等级:1100MPa(室温)/235℃ Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) /235 °C
BS EN 2912-1996 经阳极化或铬酸钝化处理的铝合金大直径扁平垫圈 Washers, flat, large diameter, in aluminium alloy, anodized or chromated
BS EN 29202-1993 珠宝.贵重金属合金纯度 Jewellery - Fineness of precious metal alloys
BS EN 2927-1996 NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆双六角头螺栓.等级:1275MPa(室温)/650℃ Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
BS EN 2928-1996 镀银的NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆的双六角头螺栓.等级:1275MPa(室温)/650℃ Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C
BS EN 2929-1996 NI-P101HT(Waspaloy)型耐热镍基合金制长螺纹安全柄十二角头螺栓.等级:1210MPa(室温)/730℃ Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 2930-1996 镀银的NI-P101HT(沃斯帕洛尹)耐热镍基合金长螺纹减荷螺杆的双六角头螺栓.等级:1210MPa(室温)/730℃ Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 °C
BS EN 2933-1996 NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆的T型头螺栓.等级:1275MPa(室温)/650℃ Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
BS EN 2934-1996 镀银的NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆的T型头螺栓.等级:1275MPa(室温)/650℃ Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification:1275 MPa (at ambient temperature)/650 °C
BS EN 2935-1996 NI-P101HT(沃斯帕洛尹)耐热镍基合金长螺纹减荷螺杆的T型头螺栓.等级:1210MPa(室温)/730℃ Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification:1210 MPa (at ambient temperature)/730 °C
BS EN 2936-1996 镀银的NI-P101HT(沃斯帕洛尹)耐热镍基合金长螺纹减荷螺杆的T型头螺栓.等级:1210MPa(室温)/730℃ Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 2942-1998 镀银耐热镍基合金NI-PH2801(因康镍合金X750)自锁紧螺旋形线圈螺纹插入件 Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
BS EN 2955-1993 钛和钛合金废料的回收利用 Recycling of titanium and titanium alloy scrap
BS EN 3005-2005 航空航天系列.自锁紧、MJ螺纹、NI-PH1302耐热镍基合金(沃斯帕洛尹合金)制镀银或不镀银螺母.等级:1210MPa ( Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature) / 730 °C - Technical specification
BS EN 3008-1998 耐热镍基合金NI-P100HT(铬镍铁合金718)制薄柄长螺纹六角头螺栓.等级:1275 MPa(室温)/650℃ Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
BS EN 3009-1998 镀银耐热镍基合金NI-P100HT(铬镍铁合金718)制薄柄长螺纹六角头螺栓.等级:1275 MPa(室温)/650℃ Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification - 1275 MPa (at ambient temperature)/650 °C
BS EN 3010-1998 耐热镍基合金NI-P101HT(沃斯帕洛尹合金)薄柄长螺纹六角头螺栓.等级:1210 MPa(室温)/730℃ Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 3011-1998 镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)薄柄长螺纹六角头螺栓.等级:1210 MPa(室温)/730℃ Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 °C
BS EN 3012-1996 耐热镍基合金HI-P101HT(沃斯帕洛尹合金)双六角头自锁螺母.等级:1210 MPa(室温)/730℃ Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 3013-1996 镀银的耐热镍基合金HI-P101HT(沃斯帕洛尹合金)双六角头自锁螺母.等级:1210 MPa(室温)/730℃ Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 3035-1997 镀镉的合金钢短螺纹紧公差标准螺杆斜十字槽100°标准埋头螺钉.等级:1100 MPa(室温)/235℃ Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 3037-1997 二硫化钼润滑的阳极化的钛合金短螺纹紧公差标准螺杆斜十字槽盘头螺钉.等级:1100 MPa(室温)/315℃ Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
BS EN 3063-1994 耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制的中长度螺纹紧公差螺杆双六角头螺栓.等级:1210 MPa(室温)/730℃ Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 3080-2006 钛合金8°30'管连接件.带止推金属丝螺母的缩短三通 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut
BS EN 3081-2001 航空航天系列.钛合金管连接件8°30'.带动梁密封端头的修理用焊接箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules welded, with dynamic beam seal end, for repair
BS EN 3082-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded, for repair
BS EN 3083-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded end, for repair
BS EN 3084-2001 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded end threaded for repair
BS EN 3112-1995 镀镉的合金钢的螺纹至螺栓头的标准六角头螺栓.等级:900 MPa(室温)/235℃ Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 3114-001-2006 航空航天系列.试验方法.(α+β)钛合金锻制品的微观结构.第001部分:一般要求 Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 001: General requirements
BS EN 3114-002-2007 航空航天系列.试验方法.钛合金锻制品微观结构(α+ β).棒材、型材、锻坯和锻件微观结构 Aerospace series - Test method - Microstructure of ( + ) titanium alloy wrought products - Microstructure of bars, sections, forging stock and forgings
BS EN 3114-003-2006 航空航天系列.试验方法.(α+β)钛合金锻制品的微观结构.第003部分:板材的微观结构 Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 003: Microstructure of plate
BS EN 3114-004-2006 航空航天系列.试验方法.(α+β)钛合金锻制品的微观结构.第004部分:超塑性成型薄板微观结构 Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming
BS EN 3141-1996 耐高温镍基合金NI-P11镀镉通用头实心铆钉.英制系列 Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series
BS EN 3142-1996 耐高温镍基合金NI-P11通用头实心铆钉.英制系列 Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series
BS EN 31427-1994 银珠宝合金中银含量测定.溴化钾容量(电位)法 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide
BS EN 3150-1995 耐热镍基NI-P100HT(因康718)型合金肩部无头轴销 Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
BS EN 3151-1995 耐热镍基合金NI-P100HI(因康718)无槽圆柱销 Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
BS EN 3236-1998 内螺纹镀银耐热镍基合金NI-P100HT(因康镍合金718)薄壁、自锁紧、短式插入件 Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 3237-1998 内螺纹镀银耐热镍基合金NI-P100HT(因康镍合金718)薄壁、自锁紧、长式插入件 Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 3239-1996 HI-P101HT型耐热镍基合金(沃斯帕洛尹合金)制螺纹镀银的自锁十二角头螺母.等级:1210 MPa(室温)/730℃型 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 3243-2001 航空航天系列.钛合金8°30'管连接件.带动力横梁密封端头的焊接环箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrule, welded, with dynamic beam seal end
BS EN 3244-2001 航空航天系列.钛合金8°30’管连接件.双端头的活接头 Aerospace Series - Pipe coupling 8 °30' in titanium alloy - Unions, double ended
BS EN 3245-2001 航空航天系列.钛合金8°30'管连接件.变径活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, reducer
BS EN 3246-2001 航空航天系列.钛合金8°30' 管连接件.、闷头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead
BS EN 3247-2001 航空航天系列.钛合金8°30'管连接件.闷头焊接端活接头、 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded end
BS EN 3248-2001 航空航天系列.钛合金管连接件8°30’.带锁紧装置的缩径管端的转接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptors, reduced pipe end, with lockring
BS EN 3264-2001 航空航天系列.钛合金8°30管连接件’.止推金属丝螺母 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Thrust wire nut
BS EN 3266-2001 航空航天系列.钛合金管连接件.闷头螺母 Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut
BS EN 3267-2001 航空航天系列.钛合金闷头垫圈 Aerospace series - Washers, bulkhead in titanium alloy
BS EN 3268-2001 航空航天系列.钛合金8°30'管连接件.压力管塞 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Pressure plug
BS EN 3269-2001 航空航天系列.钛合金管连接件8°30'.带动梁密封端头的暗箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules, blind, with dynamic beam seal end
BS EN 3270-2001 航空航天系列.8°30'钛合金管连接件.带锁紧环的截止管塞 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Blanking plug with lockring
BS EN 3272-2001 航空航天系列.8°30'钛合金管连接件.动态横梁密封端头的焊接箍.几何配置 Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for ferrule, welded - Geometric configuration
BS EN 3273-2001 航空航天系列.钛合金管连接件8°30'.弯头、十字管和三通管用动梁密封端头.几何配置 Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration
BS EN 3297-1998 薄壁、自锁紧、耐热镍基合金NI-P100HT(铬镍铁合金718)、MJ螺纹嵌镶件.技术规范 Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
BS EN 3303-1997 镀镉合金钢制中长螺纹粗公差标准柄六角凹帽罩头螺钉.等级:1100 MPa(室温)/235℃ Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 3304-1997 二硫化钼润滑的阳极化的钛合金短螺纹紧公差标准螺杆斜十字槽100°小埋头螺钉.等级:1100 MPa(室温)/315℃ Screws, 100 ° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
BS EN 3305-1997 镀镉的合金钢短螺纹紧公差标准螺杆斜十字槽100°小埋头螺钉.等级:1100 MPa(室温)/235℃ Screws, 100 ° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 3306-1996 二硫化钼润滑的阳极化的钛合金螺纹至螺钉头部的斜十字槽100°标准埋头螺钉.等级:1100 MPa(室温)/315℃ Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification - 1100 MPa (at ambient temperature)/315 °C
BS EN 3307-1997 二硫化钼润滑的阳极化的钛合金螺纹至螺钉头部的斜十字槽盘头螺钉.等级:1100 MPa(室温)/315℃ Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
BS EN 3308-1996 二硫化钼润滑的阳极化的钛合金螺纹至螺钉头部的标准六角头螺钉.等级:1100 MPa(室温)/315℃ Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification - 1100 MPa (at ambient temperature) /315 °C
BS EN 3332-2005 航空航天系列.AL-P7475-T762型铝合金.覆层铝合金薄板材和带材.1.0mm≤a≤6mm Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm
BS EN 3333-2005 铝合金AL-P7475-T762.薄板和带材.0.6 mm≤a≤6 mm Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm a 6 mm
BS EN 3335-2005 铝合金AL-P7475-O2.超塑性成型用薄板(SPF).0.8 mm≤a≤6 mm Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm
BS EN 3338-2005 航空航天系列.AL-P7050型铝合金.T74511.挤压棒材和型材.a或D<= 150 mm周边粗粒控制 Aerospace series - Aluminim alloy AL-P7050 - T74511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control
BS EN 3339-2006 航空航天系列.AL-P7010-T76型铝合金.压模锻件.a ≤200mm Aerospace series — Aluminium alloy AL-P7010- — T76 — Die forgings — a u 200 mm
BS EN 3341-2005 铝合金AL-P6061-T4或T42.薄板和带材.0.4 mm≤a≤6 mm Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm
BS EN 3342-2005 航空航天系列.AL-P6061型铝合金.T4或T42.拉拔或挤压棒材和型材.a或D <= 150 mm Aerospace series - Aluminim alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D <= 150 mm
BS EN 3344-2005 航空航天系列.AL-P7050型铝合金.T76511.挤压棒材和型材.a或D<= 150 mm周边粗粒控制 Aerospace series - Aluminim alloy AL-P7050 - T76511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control
BS EN 3347-2005 航空航天系列.铝合金AL-P2024.T8511.挤压棒材和型材.a/D≤150mm周边粗粒控制 Aerospace series - Aluminim alloy AL-P2024 - T8511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control
BS EN 3379-1996 镀银的NI-P101HT(沃斯帕洛尹)耐热镍基合金中长度螺纹紧公差螺杆的双六角头螺栓.等级:1210 MPa(室温)/730℃ Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 3444-2006 航空航天系列.钝化镍合金制耐热、标准柄、紧公差中长螺纹大直径十二沉头螺栓.等级:1250MPa(室温)/650℃ Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature) / 650 ℃
BS EN 3474-2005 航空航天系列.AL-P2024-T81型铝合金.薄板材和带材.0.25 mm <= a <= 6 mm Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <= a <= 6 mm
BS EN 3506-2001 航空航天系列.耐热合金制成的热轧薄板和板材.厚度2.0mm a 100mm.尺寸 Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm - Dimensions
BS EN 3542-1998 耐热镍基合金NI-PH2801(因康镍合金X750)自锁紧螺旋形线圈螺纹插入件 Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
BS EN 3552-2005 铝合金AL-P2618A-T6或T62.覆层薄板和带材.0.4 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm
BS EN 3553-2005 航空航天系列.铝合金AL-P2618A-T6511.挤制棒材和型材.a或D160mm Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D 160 mm
BS EN 3561-2001 航空航天系列.钛合金管连接件8°30'.在管端焊接和变径的带动力横梁密封端头的环箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end
BS EN 3566-2001 航空航天系列.钛合金8°30'管连接件.带锁紧装置的转接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptor with lockring
BS EN 3638-2007 航空航天系列.FE-PA2601(X6NiCrTiMoV26-15)耐热合金.自耗电极再熔炼.固溶和沉淀处理.薄板材、带材和厚板材. Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm a 10 mm
BS EN 3665-1997 清漆和涂料检验方法.铝合金耐纤维状腐蚀检验 Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys
BS EN 3668-2006 航空航天系列.NI-PH2301(NiCr21Fe18Mo9)型耐热合金.非热处理的.锻坯.a或D≤250mm Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D ≤ 250 mm
BS EN 3671-2007 航空航天系列.NI-PH3601(NiCr22Mo9Nb)型耐热合金.非热处理.锻坯.a或D≤250mm Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D 250 mm
BS EN 3683-2007 航空航天系列.试验方法.钛合金锻造产品.基本(α)含量测定.点数法和线截取法 Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary content - Point count method and line intercept method
BS EN 3684-2007 航空航天系列.试验方法.钛合金锻造制品.β转变温度的测定.金相法 Aerospace series - Test methods - Titanium alloy wrought products - Determination of transus temperature - Metallographic method
BS EN 3688-2001 航空航天系列.焊接管用钛合金制T环形填充物.14000kPa公称压力 Aerospace series - T-ring fillers in titanium alloy for welded pipes - 14000 kPa nominal pressure
BS EN 3689-2001 航空航天系列.焊接管用钛合金制T环形填充物.28000kPa公称压力 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure
BS EN 3690-2001 航空航天系列.钛合金8°30'管联接件.长闷头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long
BS EN 3691-2001 航空航天系列.钛合金8°30'管连接件.长焊接的闷头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded
BS EN 3719-2005 航空航天系列.电缆的铝或铝合金导体.产品标准 Aluminium or aluminium alloy conductors for electrical cables — Product standard
BS EN 3724-2004 细杆长螺纹双六角头镀MoS2的钛合金TI-P64001螺栓.强度等级:1100MPa(室温) Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strength class: 1100 MPa (at ambient temperature)
BS EN 3725-2005 航空航天系列.阳极氧化、MoS2涂覆的钛合金TI-P64001制长螺纹、标准杆、六瓣凹槽盘头螺钉.强度等级:1100MPa( Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1100 MPa (at ambient temperature)
BS EN 3730-2001 航空航天系列..鞍座形夹子.带橡胶弹性垫料的铝合金的固定式滑动型.尺寸.质量 Aerospace series - Clamps, saddle - Fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions - Masses
BS EN 3740-1997 二硫化钼润滑的阳极化的钛合金短螺纹紧公差螺杆薄六角头带肩螺栓.等级:1100 MPa(室温)/315℃ Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
BS EN 3769-1997 耐腐蚀钢和耐高温合金的电解抛光 Electrolytic polishing of corrosion resisting steels and heat resisting alloys
BS EN 3818-2005 航空航天系列.MJ螺纹的钛合金TI-P64001螺栓.强度等级:1100MPa(室温).技术规范 Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification
BS EN 3832-2005 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制长螺纹、细杆、十二角螺栓.等级:1550MPa(室温)/650℃ Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature) / 650 °C
BS EN 3833-2005 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MJ螺纹螺栓.等级:1550MPa(室温)/650℃.技术规范 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature) / 650 °C - Technical specification
BS EN 3851-2003 航空航天系列.TI-P64001型钛合金制60 球面管联接器.直的回转螺帽 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight
BS EN 3852-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直螺纹式焊接接头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded
BS EN 3853-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直活螺纹接头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, threaded
BS EN 3854-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.焊接箍 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Ferrules, welded
BS EN 3855-2002 航空航天系列.TI64001型钛合金制、球形、60度管连接器.盖 Aerospace series - Pipe couplings, 60 ° spherical, in titanium alloy TI-P64001 - Caps
BS EN 3856-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.止推金属线用转动螺母 Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire
BS EN 3857-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.焊接90度弯头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Elbows 90 °, welded
BS EN 3858-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.FE-PA 13刑止推钢丝 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA 13
BS EN 3867-2005 航空航天系列.管连接件、松套法兰和密封件.钛合金TI-P64001法兰 Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001
BS EN 3868-2005 航空航天系列.管连接件、松套法兰和密封件.钛合金TI-P64001焊接法兰连接件 Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001
BS EN 3869-2004 航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy
BS EN 3872-2005 航空航天系列.铝合金AL-R39002-H112.模锻件.a≤200 mm Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a 200 mm
BS EN 3882-2001 航空航天系列.耐热合金NI-WH1801(NiCr20Co18Ti3Al2).焊接用填充金属丝 Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler wire for welding
BS EN 3883-2001 航空航天系列.耐热合金NI-WH2301(NiCr22Fe19Mo9Co2).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding
BS EN 3884-2001 航空航天系列.耐热合金NI-WH2601(NiCr19Nb5Mo3Ti).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding
BS EN 3885-2001 航空航天系列.耐热合金NI-WH3601(NiCr22Mo9Nb4).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding
BS EN 3886-2001 航空航天系列.耐热合金NI-WH1303(NiCo20Cr20Mo5Ti2Al).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding
BS EN 3887-2001 航空航天系列.耐热合金钢CO-WH4101(CoCr20W15Ni).焊接填充金属 Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding
BS EN 3888-2001 航空航天系列.耐热合金CO-WH1402(CoCr22Ni22W15).焊接用填充金属 Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding
BS EN 3892-2001 航空航天系列.钛合金TI-W64001.焊接填充金属 Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding
BS EN 3893-2001 航空航天系列.钛合金TI-W19001.焊接用填充金属 Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding
BS EN 3894-2001 航空航天系列.耐热合金NI-WD3201(NiMo25Fe6Cr5).焊接填充金属 Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding
BS EN 3895-2001 航空航天系列,耐热合金NI-WH3901(NiCr16Mo15).焊接填充金属 Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding
BS EN 3907-2004 航空航天系列.标准杆长螺纹双六角头镀MoS2的钛合金TI-P64001螺栓.等级:1100MPa(室温)/350 鳦 Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1100MPa (at ambient temperature)/350 °C
BS EN 3913-2007 航空航天系列.部件修复用内螺纹镀银、NI-PH2601(Ni-P100HT, Inconel 718)型耐热镍基合金、短自锁薄壁嵌镶件 Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
BS EN 3917-1998 镍基合金NI-B41201(NiCr14Si5B3C).铜焊用填充金属.粉末或糊料 Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste
BS EN 3918-1998 镍基合金NI-B41201(NiCr14Si5B3C).铜焊用填充金属.窄条带材 Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape
BS EN 3919-1998 镍基合金NI-B41201(NiCr14Si5B3C).铜焊用填充金属.非晶形箔 Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil
BS EN 3920-2001 航空航天系列.镍基合金 Ni-B41202.硬钎焊填充金属.粉末或膏体 Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste
BS EN 3921-2001 航空航天系列.镍基合金 Ni-B41203.硬扦焊填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil
BS EN 3922-1998 镍基合金NI-B41203(NiCr7Si5B3).铜焊用填充金属.硼化物箔 Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil
BS EN 3923-2001 航空航天系列.镍基合金Ni-B41203(NiCr7Si5B3Fe3).硬钎焊填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI - B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste
BS EN 3924-1998 镍基合金NI-B41203(NiCr7Si5B3).铜焊用填充金属.带材 Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape
BS EN 3925-2001 航空航天系列.镍基合金NI-B40001(NiSi5B3).硬钎焊用填充金属.非晶形箔 Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil
BS EN 3926-2001 航空航天系列.镍基合金NI-B40001(NiSi5B3).硬钎焊用填充金属.硼化物箔 Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil
BS EN 3927-2001 航空航天系列.NI-B40001(NiSi5B3)镍基合金.硬钎焊用填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste
BS EN 3928-1998 镍基合金NI-B40001(NiSi5B3).铜焊用填充金属.带材 Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape
BS EN 3930-2001 航空航天系列.镍基合金NI-B31001(NiCr19Si10).硬钎焊用填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste
BS EN 3931-1998 镍基合金NI-B31001(NiCr19Si10).铜焊用填充金属.带材 Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape
BS EN 3932-2001 航空航天系列.镍基合金NI-B13001(NiP11).硬钎焊用填充金属.非晶形箔 Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil
BS EN 3933-2001 航空航天系列.镍基合金NI-B13001(NiP11).硬钎焊用填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste
BS EN 3934-2001 航空航天系列.镍基合金NI-B21001(NiCr15B4).硬钎焊用填充金属.非晶形箔 Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil
BS EN 3935-2001 航空航天系列.镍基合金 Ni-B21001.硼化物箔 Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil
BS EN 3936-2001 航空航天系列.镍基合金NI-B21001(NiCr15B4).硬钎焊用填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste
BS EN 3937-2001 航空航天系列.镍基合金NI-B44101(NiW12Cr10Si4Fe3B3).硬钎焊用填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste
BS EN 3938-2001 航空航天系列.镍基合金 Ni-B46001.非晶态箔 Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) Filler metal for brazing - Amorphous foil
BS EN 3939-2001 航空航天系列.镍基合金 Ni-B46001.硬钎焊填充金属.粉末或膏体 Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste
BS EN 3940-1998 镍基合金NI-B46001(NiCo20Si5B3).铜焊用填充金属.带材 Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Tape
BS EN 3941-2001 航空航天系列.镍基合金 Ni-B41204.硬钎焊填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil
BS EN 3942-2001 航空航天系列.镍基合金NI-B41204(NiCr13Si4B3).硬钎焊用填充金属.硼化物箔 Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil
BS EN 3943-2001 航空航天系列.镍基合金NI-B41204(NiCr13Si4B3).硬钎焊用填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste
BS EN 3944-1998 镍基合金NI-B41204(NiCr13Si4B3).铜焊用填充金属.带材 Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape
BS EN 3945-2001 航空航天系列.镍基合金 Ni-B48801.硬钎焊填充金属.粉末或膏体 Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste
BS EN 3946-2001 航空航天系列.镍基合金 Ni-15701.硬钎焊填充金属.粉末或膏体 Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste
BS EN 3947-1998 镍基合金NI-B15701(NiPd34Au30).铜焊用填充金属.轧制箔 Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil
BS EN 3948-1998 镍基合金NI-B15701(NiPd34Au30).铜焊用填充金属.线材 Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire
BS EN 3952-2001 航空航天系列.银基合金AG-B10001(AgCu28).硬钎焊用填充金属.金属丝 Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire
BS EN 3953-2001 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).硬钎焊用填充金属.金属丝 Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire
BS EN 3954-2001 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).硬钎焊用填充金属.粉末或糊料 Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste
BS EN 3955-2001 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).硬钎焊用填充金属.轧制的箔材 Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil
BS EN 3956-2001 航空航天系列.银基合金AG-B14001(AgCu42Ni2).硬钎焊用填充金属.金属丝 Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire
BS EN 3957-2001 航空航天系列.银基合金AG-B14001(AgCu42Ni2).硬钎焊用填充金属.粉末或糊料 Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste
BS EN 3958-2001 航空航天系列.银基合金AG-B14001(AgCu42Ni2).硬钎焊用填充金属.轧制的箔材 Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil
BS EN 3959-2001 航空航天系列.钴基合金CO-B41601(CoCr19Ni17Si8W4).硬钎焊填充金属.粉末或糊料 Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste
BS EN 3960-2001 航空航天系列.金基合金AU-B40001(AuNi18).硬钎焊填充金属.粉末和糊料 Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste
BS EN 3961-2001 航空航天系列.金基合金AU-B4000.硬钎焊用填充金属.轧制箔 Aerospace series - Gold base alloy AU-B4000 - Filler metal for brazing - Rolled foil
BS EN 3962-2001 航空航天系列.金基合金AU-B40001.硬钎焊用填充金属.金属丝 Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire
BS EN 3965-2001 航空航天系列.钛合金TI-B17001.硬钎焊用填充金属.轧制的箔材 Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil
BS EN 3976-2006 航空航天系列.钛和钛合金.试验方法.氢含量测定用化学分析 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
BS EN 3979-2005 航空航天系列.AL-P8090-O2型铝合金.超塑性成型(SPF)用薄板材.0.8mm≤a≤6mm Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm <= a <= 6 mm
BS EN 3997-2007 航空航天系列.AL-P2024-T3型铝合金.薄板材和带材.0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0 ,4 mm $3Q a $3Q 6 mm
BS EN 3998-2007 航空航天系列.AL-P2024-T4或T42型铝合金.薄板材和带材.0.3mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip - 0,3 mm a 6 mm
BS EN 3999-2007 航空航天系列.AL-P2024-T351型铝合金.改进的化学铣削性能1.6mm≤a≤6mm的薄板材和带材 Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm a 6 mm
BS EN 4001-2007 航空航天系列.AL-P2024-T351型铝合金.改进的化学铣削性能1.6mm≤a≤6mm的镀铝薄板材和带材 Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm a 6 mm
BS EN 4002-2007 航空航天系列.AL-P2219-T81型铝合金.0.5mm≤a≤6mm的薄板材和带材 Aerospace series - Aluminium alloy AL-P2219-T81 - Sheet and strip 0,5 mm a 6 mm
BS EN 4003-2006 航空航天系列.铝合金AL-P2219-T87.薄板材和带材0.5mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm a 6 mm
BS EN 4004-2007 航空航天系列.AL-P3103-H16型铝合金.薄板材和带材.0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip - 0,4 mm a 6 mm
BS EN 4005-2007 航空航天系列.AL-P5052-O型铝合金.薄板材和带材.0.3mm≤a≤6mm Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0 ,3 mm a 6 mm
BS EN 4006-2007 航空航天系列.AL-P6082-T4或T42型铝合金.薄板材和带材.0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm a 6 mm
BS EN 4007-2005 铝合金AL-P6082-T6或T62.薄板和带材.0.4 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm
BS EN 4009-2005 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制中长螺纹、紧公差柄、十二角头螺栓.等级:1550MPa(室 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)
BS EN 4011-2005 航空航天系列.十二角头自锁紧的镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 鳦 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C
BS EN 4012-2004 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MoS2涂覆的自锁紧双六角头螺母.等级:1550MPa(室温)/4 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
BS EN 4013-2005 航空航天系列.自锁紧镀银耐热镍基合金NI-PH2601(铬镍铁合金718)制带柄螺母.等级:1550MPa(室温)/600 鳦 Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature) / 600 °C
BS EN 4017-2001 航空航天系列.钛合金管连接件8°30'.90°弯头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °
BS EN 4018-2001 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的90°弯头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° with thrust wire nut
BS EN 4019-2001 航空航天系列.钛合金管连接件8°30'.焊接的90°弯头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded
BS EN 4020-2001 航空航天系列.钛合金8°30'管连接件.带止推金属丝螺母(thrust wire nut)的90°弯头焊接端 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded end with thrust wire nut
BS EN 4021-2001 航空航天系列.钛合金管连接件8°30'.闷头90°弯头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead
BS EN 4022-2001 航空航天系列.钛合金管连接件8°30'.闷头、90°弯头焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead, welded end
BS EN 4023-2001 航空航天系列.钛合金管连接件8°30'.45°弯头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 °
BS EN 4024-2001 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的45°弯头焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° welded end with thrust wire nut
BS EN 4025-2001 航空航天系列.钛合金管连接件8°30'.45°弯头闷头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 °, bulkhead
BS EN 4026-2001 航空航天系列.钛合金管连接件8°30'.三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees
BS EN 4027-2001 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的三通管分支 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees branch with thrust wire nut
BS EN 4028-2001 航空航天系列.钛合金管连接件8°30'.在使用的带止推金属丝螺母的三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees with thrust wire nut on run
BS EN 4029-2001 航空航天系列.钛合金管连接件8°30'.三通管闷头分支 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees bulkhead branch
BS EN 4030-2001 航空航天系列.钛合金管连接件8°30'.还在使用的三通管闷头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees bulkhead on run
BS EN 4031-2001 航空航天系列.钛合金管连接件8°30'.焊接活接头用螺母 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union
BS EN 4032-2001 航空航天系列.钛合金管连接件8°30'.止推金属丝 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Thrust wire
BS EN 4035-2006 航空航天系列.减小内部径向间隙和带螺纹钛合金杆耐腐蚀钢可调自动对心双列球轴承的杆端.尺寸和载荷 Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
BS EN 4045-2001 航空航天系列.耐热合金制的无缝毛细管.直径为0.6mm 2mm.尺寸 Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm D 2 mm - Dimensions
BS EN 4047-2004 航空航天系列.自锁紧MJ螺纹镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 鳦.技术 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550MPa (at ambient temperature)/600 °C - Technical specification
BS EN 4048-2004 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MoS2涂覆的自锁、带MJ螺纹的螺母.等级:1550MPa(室温) Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C - Technical specification
BS EN 4051-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.油口接头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy - Port connection
BS EN 4054-2004 航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳.技术规范 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification
BS EN 4058-2001 航空航天系列.钛和钛合金制的焊接用填充杆材和填充金属丝.直径为0.5mm 5.0mm.尺寸 Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm D 5,0 mm - Dimensions
BS EN 4060-2001 航空航天系列.钛和钛合金制的焊接用填充杆材和填充金属丝.直径为0.5mm 5.0mm.尺寸 Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm D 5,0 mm - Dimensions
BS EN 4085-2001 航空航天系列.镍基合金 Ni-40002.硬钎焊填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil
BS EN 4099-2005 铝合金AL-P2219-T6或T62.覆层薄板和带材.0.5 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm a 6 mm
BS EN 4100-2005 铝合金AL-P2219-T6或T62.薄板和带材.0.5 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm a 6 mm
BS EN 4101-2005 铝合金AL-P2024-T4.改进拉伸成形性能的薄板和带材.0.4 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm a 6 mm
BS EN 4102-2005 航空航天系列.铝合金AL-P2219-T81.覆层薄板和带材.0.5 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm a 6 mm
BS EN 4103-2001 航空航天系列.镍基合金NI-B40002(NiSi4B2).钎焊用填充金属.硼化物箔 Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil
BS EN 4104-2001 航空航天系列.NI-B40002镍基合金.硬钎焊用填充金属.粉末或糊料 Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste
BS EN 4105-1998 镍基合金NI-B40002(NiSi4B2).铜焊用填充金属.带材 Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape
BS EN 4114-2001 航空航天系列.带橡胶衬料的铝合金环形卡箍("P"型).尺寸和质量 Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions and masses
BS EN 4117-2004 航空航天系列.十二角头自锁紧螺纹镀银的耐热镍基合金NI-PH 2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/60 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
BS EN 4120-2004 十二角、自锁紧、NI-PH1302耐热镍基合金(沃斯帕洛尹合金)、螺纹镀银的螺母.分类:1210MPa(环境温度下)/730 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread - Classification - 1 210 MPa (at ambient temperature) / 730 °C
BS EN 4123-2004 航空航天系列.自锁紧螺纹镀银的耐热镍基合金NI-PH 2601(铬镍铁合金718)带柄螺母.等级:1550MPa(室温)/600 鳦 Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
BS EN 4124-2004 航空航天系列.60 型模用自锁紧螺纹镀银的耐热镍基合金NI-PH1302(一种耐高热镍基合金)带柄螺母.等级:1210MP Aerospace series - Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60 ° swage - Classification - 1 210 MPa (at ambient temperature) / 730 °C
BS EN 4172-2006 航空航天系列.紧公差TI-P64001阳极电镀的米制钛合金杆沉头、凹头锁紧螺栓.分类:1100 MPa / 315 °C（周围温 Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 4173-2006 航空航天系列.紧公差TI-P64001阳极电镀的米制钛合金杆１００°正常头、凹头锁紧螺栓.分类:1100 MPa / 315 Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 4174-2006 航天航空系列.阳极电镀或铬酸盐处理铝合金2024米制系列、连接模压锁紧凹头紧固件 Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
BS EN 4175-2005 航天航空系列.TI-P99002型钛合金米制系列、法兰连接模压锁紧切变型垫圈 Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series
BS EN 4176-2005 航空航天系列.紧公差TI-P64001钛合金制阳极电镀或铝质有色覆层１００°正常或沉头紧固/凹头锁紧螺栓.TI-P99 Aerospace series - Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification
BS EN 4180-2002 航空航天系列.流体用钛及钛合金圆形管.宽度公差.直径为4mm D 40mm.尺寸 Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances - Diameter 4 mm D 40 mm - Dimensions
BS EN 4182-2001 航空航天系列.钛合金管连接件8°30'.异径三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced
BS EN 4183-2001 航空航天系列.钛合金管连接件8°30'.90°弯头焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° welded ends
BS EN 4184-2001 航空航天系列.钛合金管连接件8°30'.45°弯头双焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° double, welded ends
BS EN 4185-2001 航空航天系列.钛合金管连接件8°30'.长闷头三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, bulkhead on run long
BS EN 4186-2001 航空航天系列.钛合金管连接件8°30'.十字形活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, cross
BS EN 4187-2001 航空航天系列.钛合金管连接件8°30'.90°弯头长闷头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead, long
BS EN 4188-2001 航空航天系列.钛合金管连接件8°30'.90°弯头长闷头焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° bulkhead, long, welded end
BS EN 4189-2001 航空航天系列.钛合金8°30'管连接件.带有长闷头套管的三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, bulkhead branch long
BS EN 4190-2001 航空航天系列.钛合金管连接件8°30'.在使用的带止推金属丝的缩径三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced with thrust wire nut on run
BS EN 4191-2001 航空航天系列.钛合金管连接件8°30'.缩径三通管长闷头分支 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced, bulkhead branch, long
BS EN 4192-2001 航空航天系列.钛合金8°30'管连接件.带有缩短闷头套管的三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced bulkhead branch
BS EN 4193-2001 航空航天系列.钛合金8°30'管连接件.带有异径长闷头的三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced bulkhead on run long
BS EN 4194-2001 航空航天系列.钛合金8°30'管连接件.带有异径闷头三通管 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced, bulkhead
BS EN 4202-2005 航空航天系列.铝合金AL-P6082-T651.板材.6 mm≤a≤25 mm Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm a 25 mm
BS EN 4203-2005 航空航天系列.AL-P8090-T89型铝合金.薄板材.0.6mm≤a≤6mm Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm <= a <= 6 mm
BS EN 4204-2005 航空航天系列.AL-P8090-T841型铝合金.薄板材.0.6mm≤a≤6mm Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm <= a <= 6 mm
BS EN 4209-2005 航空航天系列.AL-P2219-T851型铝合金.厚板材. 6 mm <=50 mm Aluminium alloy AL-P2219-T851 - Plate - 6 mm ＜a ≤50 mm
BS EN 4211-2005 航空航天系列.铝合金AL-P2024-T42.覆层板材.6 mm≤a≤25 mm Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm a 25 mm
BS EN 4212-2005 航空航天系列.铝合金AL-P5086-H111.板材.6 mm≤a≤80 mm Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm a 80 mm
BS EN 4213-2005 航空航天系列.铝合金AL-P6061-T651.板材.6 mm≤a≤80 mm Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm a 80 mm
BS EN 4214-2005 航空航天系列.铝合金AL-P7010-T651.板材.6 mm≤a≤20 mm Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm a 20 mm
BS EN 4215-2005 航空航天系列.铝合金AL-P7175-T651.板材.6 mm≤a≤80 mm Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm a 80 mm
BS EN 4233-2001 航空航天系列.钛合金管连接件8°30'.带螺纹的焊接活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded, threaded
BS EN 4247-2005 航空航天系列.铝合金AL-P2024-T42.板材.6 mm≤a≤140 mm Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm a 140 mm
BS EN 4250-2001 航空航天系列.镍基合金NI-B41001(NiCr19Si7B).硬钎焊填充金属.非晶质箔材 Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil
BS EN 4267-2001 航空航天系列.钛和钛合金制的圆形棒材.直径为6mm 160mm.尺寸 Aerospace series - Round bar in titanium and titanium alloys - Diameter 6 mm D 160 mm - Dimensions
BS EN 4283-2005 航空航天系列.AL-P2219-T87型铝合金.板材.6mm≤a≤40mm Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a <= 40 mm
BS EN 4286-2005 航空航天系列.铝合金AL-P8090-T89.模锻件.a≤125 mm Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a 125 mm
BS EN 4287-2005 航天航空系列.AL-P7010型铝合金.锻坯件 Aerospace series - Aluminium alloy AL-P7010 - Forging stock
BS EN 4291-2005 航空航天系列.铝合金AL-P8090.锻造坯料 Aerospace series - Aluminium alloy AL-P8090 - Forging stock
BS EN 4292-2005 航空航天系列.铝合金AL-R39002.锻造坯料 Aerospace series - Aluminium alloy AL-R39002 - Forging stock
BS EN 4313-2005 航空航天系列.铝合金AL-P6013-T6.薄板和带材.0.5 mm≤a≤6 mm Aerospace series - Aluminium aloy AL-P6013-T6 - Sheet and strip - 0,5 mm a 6 mm
BS EN 4321-2004 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金 718)制的带安全锁线孔、细杆、长螺纹、镀银的双六角头螺栓 Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification - 1 550 Mpa (at ambient temperature)/650 °C
BS EN 4322-2004 航空航天系列.钛合金TI-P64001制的带安全锁线孔、细杆、长螺纹、阳极氧化、镀MoS2的双六角头螺栓.强度等级. Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in titanium alloy TI-P64001, anodized , MoS2 coated - Strength class - 1 100 MPa (at ambient temperature)
BS EN 4323-2004 航空航天系列.钛合金TI-P64001制的六瓣凹槽、全杆螺纹、阳极氧化、镀MoS2的100 沉头螺钉.分类.900MPa(室温 Aerospace series - Screws, 100 ° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated - Classification - 900 MPa (at ambient temperature) / 350 °C
BS EN 4324-2002 航空航天系列.AL-W42201铝合金.焊接用填充金属.焊条 Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod
BS EN 4325-2001 航空航天系列.耐热合金NI-WH1302(NiCr20Co13Mo4Ti3Ai).焊接填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod
BS EN 4326-2001 航空航天系列.耐热合金CO-WH4102(CoCr28W20Ni5V1).硬钎焊用填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod
BS EN 4327-2001 航空航天系列.耐热合金CO-WH1401(CoCr26Ni11W8).硬钎焊用填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod
BS EN 4329-2001 航空航天系列.耐热合金NI-WH0001(NiCr20).焊接填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod
BS EN 4337-2001 航空航天系列.耐热合金NI-WH8901(NiCr16Ti3Mn2).硬钎焊用填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod
BS EN 4338-2001 航空航天系列.耐热合金NI-WH3902(NiCr25Mo10C).硬钎焊用填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy - NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod
BS EN 4339-2001 航空航天系列.耐热合金CO-WH4001(CoCr29W9).硬钎焊用填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod
BS EN 4340-2002 航空航天系列.MG-W68001镁合金钢. 焊接用填充金属.焊丝和焊条 Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod
BS EN 4341-2001 航空航天系列.铝合金AL-W46431.焊接填充金属.金属丝和焊条 Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod
BS EN 4352-2004 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金 718)制带安全锁线孔、细杆、长螺纹、镀MoS2 的双六角头螺 Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
BS EN 4382-2006 航空航天系列.NI-PH3601(NiCr22Mo9Nb)型耐热合金.溶解处理的.无缝管.液压用.D≤50mm、a≤3mm Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D ≤ 50 mm, a ≤ 3 mm
BS EN 4383-2006 航空航天系列.NI-CH2601(NiCr19Fe19Nb5Mo3)型耐热合金.非热处理的.重熔坯料 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
BS EN 440-1995 焊接消耗材料.非合金与细晶粒钢的气体保护金属电弧焊用丝状电极和熔积物.分类 Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
BS EN 4401-2006 航空航天系列.紧公差TI-P64001铝制有色覆层的米制钛合金杆沉头、凹头锁紧螺栓.分类:1100 MPa / 315 °C（周 Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 4402-2006 航空航天系列.紧公差TI-P64001铝制有色覆层的米制钛合金杆１００°正常头、凹头锁紧螺栓.分类:1100 MPa / 3 Lockbolts, 100 °countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 4420-2003 航空航天系列.FE-PA3903型合金钢制弹簧夹 Aerospace series - Clips, spring tension, in alloy steel FE-PA3903
BS EN 4421-2007 航空航天系列.带锯齿状、耐腐蚀钢锁紧环的、镀MoS2涂层的、TI-P64001钛合金螺柱.强度等级:1100MPa(环境温度 Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature)
BS EN 4434-2005 航空航天系列.电缆的铜和铜合金轻型导体.产品质量（正常和紧公差） Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances)
BS EN 4449-2005 AL-P7050-T76型铝合金.薄板材.0.8mm≤a≤6mm Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm ≤ a ≤ 6 mm
BS EN 4450-2005 航空航天系列.铝合金AL-P7050-T762.薄板.0.8 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm a 6 mm
BS EN 4458-2005 航空航天系列.带锯齿状锁紧环耐腐蚀钢镀MoS2涂层的TI-P64001型钛合金MJ螺纹螺柱.强度等级:1100MPa(室温).技 Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001 , MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature) - Technicalspecification
BS EN 4459-2005 航空航天系列.钛合金TI-P64001制带锯齿型锁环的耐腐钢螺柱.设计标准 Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard
BS EN 4460-2005 航空航天系列.钛合金TI-P64001制带锯齿型锁环的耐腐钢螺柱.安装和拆卸程序 Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure
BS EN 4496-2005 航空航天系列.有色铝涂层、阳极化的、钛合金、短螺纹、紧公差标称杆、偏位十字凹槽沉头标称100 °螺钉.等级 Aerospace series - Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 4497-2005 航空航天系列.有色铝涂层、阳极化的、钛合金、短螺纹、紧公差标称杆、偏位十字凹槽盘头螺钉.等级:1100MPa( Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 4498-2005 航空航天系列.有色铝涂层、钝化的、耐热镍基合金、中等长度螺纹、紧公差标称杆、大双六角头螺栓.等级:1550M Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C
BS EN 4501-2006 航空航天系列.带镀铝涂层的阳极电镀钛合金短螺纹紧公差标准柄正六角头螺栓、米制系列.等级:1100MPa(室温)/3 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 4509-2006 航空航天系列.带镀铝涂层阳极氧化的钛合金螺纹延伸到螺头100°沉头偏置十字凹槽螺钉、米制系列.等级:1100MP Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C
BS EN 4549-2003 航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计造型.英制 Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series
BS EN 4591-2005 航空航天.耐高温镍基合金钢制MOS2润滑的自调准筒形游动自锁螺母.等级为:1550 MPa (环境温度) / 315 °C Aerospace series - Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated - Classification: 15 50 MPa (at ambient temperature) / 315 °C
BS EN 4610-2005 航空航天系列.8°30'钛合金管接头.带推进线螺母的45°弯头 Pipe coupling 8°30' in titanium alloy — Elbows 45°, with thrust wire nut
BS EN 4615-2005 航空航天系统.MG-C18002镁合金.T4.砂型铸造 Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting
BS EN 4616-2005 航天航空系列.镁合金MG-C18002.T4.冷型铸造 Magnesium alloy MG-C18002 - T4 - Chill casting
BS EN 485-1-1994 铝和铝合金.薄板材、带材和板材.检验和交货技术状态 Aluminium and aluminium alloys - Sheet, strip and plate - Technical conditions for inspection and delivery
BS EN 485-2-2007 铝和铝合金.薄板材、带材和板材.机械特性 Aluminium and aluminium alloys - Sheet, strip and plate - Mechanical properties
BS EN 485-3-2003 铝和铝合金.片材、带材和板材.热轧制品的形状和尺寸公差 Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on dimensions and form for hot-rolled products
BS EN 485-4-1994 铝和铝合金.薄板材、带材和板材.冷轧制品的形状和尺寸公差 Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on shape and dimensions for cold-rolled products
BS EN 486-1994 铝和铝合金.挤压铸锭.规范 Aluminium and aluminium alloys - Extrusion ingots - Specifications
BS EN 487-1994 铝和铝合金.滚轧锭.规范 Aluminium and aluminium alloys - Rolling ingots - Specifications
BS EN 50069-1991 充气高压开关设备和控制设备用铸铝合金和锻铝合金焊接混合材料外壳规范 Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
BS EN 50149-2001 铁路设施.固定置装.电力牵引.铜和铜合金波纹连接线 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
BS EN 50183-2000 架空导线.铝镁硅合金导线 Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires
BS EN 50307-2003 铅和铅合金.电缆的铅和铅合金护套和套管 Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables
BS EN 50337-8-3-2007 纤维光学通信系统使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-PC Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category C
BS EN 50377-8-2-2007 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-APC Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
BS EN 50377-8-4-2007 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-APC Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category U
BS EN 50377-8-5-2007 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-PC单 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category U
BS EN 515-1993 铝和铝合金.锻制品.回火标志 Aluminium and aluminium alloys - Wrought products - Temper designations
BS EN 541-2006 铝和铝合金.金属罐、密封物和盖子用轧制品.规范 Aluminium and aluminium alloys — Rolled products for cans, closures and lids — Specifications
BS EN 546-1-2006 铝和铝合金.箔.第1部分:检验和交付用技术条件 Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery
BS EN 546-2-2006 铝和铝合金.第2部分:箔.机械性能 Aluminium and aluminium alloys - Part 2: Foil - Mechanical properties
BS EN 546-3-2006 铝和铝合金.箔.第3部分:尺寸公差 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
BS EN 546-4-2006 铝和铝合金.箔.第4部分:特殊性能要求 Aluminium and aluminium alloys - Foil - Part 4: Special property requirements
BS EN 570-1995 锻铝和铝合金.由可锻制铝产品加工的冲击挤压铝块.规范 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications
BS EN 573-1-2004 铝和铝合金.锻制产品化学组成和外形.数字标示系统 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Numerical designation system
BS EN 573-2-1995 铝和铝合金.锻制产品的化学成分和外形.基于化学标志的命名系统 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Chemical symbol based designation system
BS EN 573-3-2007 铝和铝合金.锻制品的化学成分和形状.产品的化学成分和形状 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Chemical composition and form of products
BS EN 573-5-2007 铝和铝合金.锻制品的化学成分和形状.标准锻制品汇编 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Codification of standardized wrought products
BS EN 575-1996 铝和铝合金.熔铸母合金.规范 Aluminium and aluminium alloys - Master alloys produced by melting - Specifications
BS EN 576-2003 铝和铝合金.再熔非合金铝锭.规范 Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications
BS EN 577-1996 铝和铝合金.液体金属.规范 Aluminium and aluminium alloys - Liquid metal - Specifications
BS EN 586-1-1998 铝和铝合金.锻件.检验和交付技术状态 Aluminium and aluminium alloys - Forgings - Technical conditions for inspection and delivery
BS EN 586-2-1994 铝和铝合金.锻件.机械特性和附加特性要求 Aluminium and aluminium alloys - Forgings - Mechanical properties and additional property requirements
BS EN 586-3-2002 铝和铝合金.锻件.尺寸和形状公差 Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form
BS EN 601-2004 铝和铝合金.铸件.与食品接触用铸件的化学成分 Aluminum and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff
BS EN 602-2004 铝和铝合金.锻件.与食品接触的产品制造用半成品的化学成分 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
BS EN 603-1-1997 铝及铝合金.锻坯.检验和交付技术状态 Aluminium and aluminium alloys - Wrought forging stock - Technical conditions for inspection and delivery
BS EN 603-2-1997 铝及铝合金.锻坯.机械性能 Aluminium and aluminium alloys - Wrought forging stock - Mechanical properties
BS EN 603-3-2000 铝及铝合金.锻坯.尺寸和形状公差 Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form
BS EN 604-1-1997 铝及铝合金.铸锻件坯.检查和交付技术状态 Aluminium and aluminium alloys - Cast forging stock - Technical conditions for inspection and delivery
BS EN 604-2-1997 铝及铝合金.铸锻件坯.尺寸和形位公差 Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form
BS EN 610-1996 锡和锡合金.锡锭 Tin and tin alloys - Ingot tin
BS EN 611-1-1996 锡和锡合金.锡铅合金和锡铅合金器皿.锡铅合金 Tin and tin alloys - Pewter and pewterware - Pewter
BS EN 611-2-1997 锡和锡合金.锡铅合金和锡铅合金器皿.第2部分:锡铅合金器皿 Tin and tin alloys - Pewter and pewterware - Pewterware
BS EN 61190-1-3-2007 电子组装件用连接材料.电子钎焊用电子级钎焊合金和有助熔剂和无助熔剂的固体焊锡的要求 Attachment materials for electronic assembly - Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
BS EN 61755-3-5-2006 纤维光学连接器的光学接口.第3-5部分:光学接口.使用铜-镍合金作为单模纤维光纤接口材料用的直径2.5mm和1.25 Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single modefibre
BS EN 61755-3-6-2006 纤维光学连接器的光学接口.第3-6部分:光接口.用铜-镍合金作为纤维环绕材料的单模光纤直径2.5mm和1.25mm圆柱 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degreesangled-PC composite ferrule using Cu-Ni-alloy as fibre surroundingmaterial, single mode fibre
BS EN 61788-3-2006 超导性.临界电流测量.涂层银或银合金的Bi-2212和Bi-2223氧化超导体的直流临界电流 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
BS EN 683-1-2006 铝和铝合金.叶片坯料.第1部分:检验和交付技术条件 Aluminium and aluminium alloys. Finstock. Part 1: Technical conditions for inspection and delivery
BS EN 683-2-2006 铝和铝合金.散热片坯料.第2部分:机械特性 Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
BS EN 683-3-2006 铝和铝合金.散热片坯料.第3部分:尺寸和形状公差 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
BS EN 723-1996 铜和铜合金.铜管道和接头的内表面积碳测定的燃烧方法 Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings
BS EN 754-1-1997 铝和铝合金.冷拉短棒材/棒材和管材.第1部分:检验和交付技术状态 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Technical conditions for inspection and delivery
BS EN 754-2-1997 铝和铝合金.冷拉短棒材/棒材和管材.第2部分:机械特性 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Mechanical properties
BS EN 754-3-1996 铝和铝合金.冷拉短棒材/棒材和管材.圆棒材的尺寸和形位公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Round bars, tolerances on dimensions and form
BS EN 754-4-1996 铝和铝合金.锻制品.冷拉短棒材/棒材和管材.方棒材的形位公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Square bars, tolerances on dimensions and form
BS EN 754-5-1996 锻铝和铝合金.冷拉短棒材/棒材和管材.第5部分:矩形棒材.尺寸和形位公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Rectangular bars, tolerances on dimensions and form
BS EN 754-6-1996 铝和铝合金.冷拉短棒材/棒材和管材.冷拉六角形棒材的尺寸和形位公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Hexagonal bars, tolerances on dimensions and form
BS EN 754-7-1998 铝和铝合金.冷拉棒材和管材.无缝管.尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Seamless tubes, tolerances on dimensions and form
BS EN 754-8-1998 铝和铝合金.冷拉短棒材/棒材和管材.出水孔管.尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Porthole tubes, tolerances on dimensions and form
BS EN 755-1-1997 铝和铝合金.挤压短棒材/棒材、管材和型材.检验和交付技术状态 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Technical conditions for inspection and delivery
BS EN 755-2-1997 铝和铝合金.挤出杆材/棒材、管材和型材.机械性能 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Mechanical properties
BS EN 755-3-1996 铝和铝合金.挤压短棒材/棒材、管材和型材.圆棒材的尺寸和形位公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Round bars, tolerances on dimensions and form
BS EN 755-4-1996 铝和铝合金.挤压短棒材/棒材、管材和型材.方棒材的尺寸和形位公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Square bars, tolerances on dimensions and form
BS EN 755-5-1996 铝和铝合金.挤压短棒材/棒材、管材和型材.矩形棒材的尺寸和形位公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Rectangular bars, tolerances on dimensions and form
BS EN 755-6-1996 铝和铝合金.挤压杆材/棒材、管材和型材.六角形棒材的尺寸和形位公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Hexagonal bars, tolerances on dimensions and form
BS EN 755-7-1998 铝和铝合金.挤压短棒材/棒材、管材和型材.无缝管.尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Seamless tubes, tolerances on dimensions and form
BS EN 755-8-1998 铝和铝合金.挤压短棒材/棒材、管材和型材.出水孔管.尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Porthole tubes, tolerances on dimensions and form
BS EN 755-9-2001 铝和铝合金.挤压短棒材/棒材、管材及型材.型材的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Profiles, tolerances on dimensions and form
BS EN 756-2004 焊接消耗品.非合金和细粒钢埋弧焊用实芯焊丝、实芯焊丝和药芯焊丝混合助熔剂.分类 Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
BS EN 758-1997 焊接用料.带有和不带非合金钢及细粒钢气体保护的金属电弧焊接用管状芯焊条.分类 Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels - Classification
BS EN 851-1996 铝和铝合金.锻制品.烹调器具用圆形材料和圆坯料规范 Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
BS EN 941-1996 铝和铝合金.圆形材料和圆坯料的通用要求.规范 Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications
BS EN 988-1997 锌和锌合金.建筑用轧制平板材规范 Zinc and zinc alloys - Specification for rolled flat products for building
BS EN IS0 22825-2006 焊接的无损试验.超声波试验.奥氏体钢和镍合金焊接试验 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
BS EN ISO 10042-2006 焊接.铝和铝合金弧焊接头.缺陷质量分级 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
BS EN ISO 10993-15-2001 医疗器械的生物评定.金属及合金中降解产物的识别与量化 Biological evaluation of medical devices - Identification and quantification of degradation products from metals and alloys
BS EN ISO 11130-1999 金属和合金的腐蚀.盐溶液中的交替浸入试验 Corrosion of metals and alloys - Alternate immersion test in salt solution
BS EN ISO 11143-2000 牙科设备.汞齐合金分离器 Dental equipment - Amalgam separators
BS EN ISO 11210-1995 铂珠宝合金中铂的测定.二铵六氯铂沉淀后的重量法 Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate
BS EN ISO 11306-1998 金属和合金腐蚀.金属和合金暴露于海水表面后的评估指南 Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water
BS EN ISO 11426-1999 金合金首饰中金含量的测定.灰吹法(火试验法) Determination of gold in gold jewellery alloys - Cupellation method (fire assay)
BS EN ISO 11489-1995 铂珠宝合金中铂的测定.氯化汞(I)还原后重量法 Determination of platinum in platinum jewellery alloys - Gravimetric method after reduction with mercury(I) chloride
BS EN ISO 11490-1995 钯珠宝合金中钯的测定.丁二酮肟重量法 Determination of palladium in palladium jewellery alloys - Gravimetric method with dimethyl glyoxime
BS EN ISO 12215-3-2002 小艇.船体构造和船材尺寸.材料.钢、铝合金、木材及其它材料 Small craft - Hull construction and scantlings - Materials - Steel, aluminium alloys, wood, other materials
BS EN ISO 13680-2002 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
BS EN ISO 13897-2004 牙科学.汞齐合金胶囊 Dentistry - Amalgam capsules
BS EN ISO 13919-2-2001 焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
BS EN ISO 14172-2003 焊接消耗品.镍及镍合金金的手工电弧焊接用涂敷焊条.分类 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification
BS EN ISO 14920-1999 热喷涂.自熔合金的熔化和喷涂 Thermal spraying - Spraying and fusing of self-fluxing alloys
BS EN ISO 15156-2-2003 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化碳和低合金钢及铸铁的使用 Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking resistant carbon and low alloy steels, and the use of cast irons
BS EN ISO 15156-3-2003 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化CRAs(耐腐蚀合金)和其他合金 Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
BS EN ISO 15349-2-2003 非合金钢.低碳含量的测定.(预热)感应炉燃烧后红外线吸收法 Unalloyed steel - Determination of low carbon content - Infrared absorption method after combustion in an induction furnace (with preheating)
BS EN ISO 15546-2007 石油和天然气工业.铝合金钻杆 Petroleum and natural gas industries - Aluminium alloy drill pipe
BS EN ISO 15614-1-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.钢的弧焊和气焊以及镍和镍合金的弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of steels and arc welding of nickel and nickel alloys
BS EN ISO 15614-2-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.铝及其合金的电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of aluminium and its alloys
BS EN ISO 15614-5-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.钛、锆及其合金电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of titanium, zirconium and their alloys
BS EN ISO 15614-6-2006 金属材料焊接程序的规范和合格鉴定.焊接程序试验.铜及其合金的弧焊和气焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of copper and its alloys
BS EN ISO 18273-2004 焊接消耗品.铝和铝合金焊接用丝状电极、焊丝和焊条.分类 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification
BS EN ISO 18274-2004 焊接消耗品.镍和镍合金熔焊用丝状和杆状电极、焊丝和焊条.分类 Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification
BS EN ISO 18595-2007 电阻焊接.铝和铝合金的点焊.可焊性、焊接和测试 Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing
BS EN ISO 196-1995 锻造铜和铜合金.残余应力的测定.硝酸汞(I)试验 Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test
BS EN ISO 2063-2005 热喷镀.金属和其他无机覆层.锌、铝及其合金 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
BS EN ISO 24034-2006 焊接消耗品.钛和钛合金熔焊用实线和棒材.分类 Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification
BS EN ISO 24234-2004 牙科学.牙科汞齐合金用汞及合金 Dentistry - Mercury and alloys for dental amalgam
BS EN ISO 2560-2006 焊料.非合金钢和细粒钢的手工金属电弧焊接的涂敷焊条.分类 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
BS EN ISO 2566-1-1999 钢.伸长值的换算.碳素钢和低合金钢 Steel - Conversion of elongation values - Carbon and low alloy steels
BS EN ISO 2624-1995 铜及铜合金.平均粒度估计 Copper and copper alloys - Estimation of average grain size
BS EN ISO 3325-1999 不包括硬质合金的烧结金属材料.横向断裂强度的测定 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
BS EN ISO 3613-2001 锌,镉,铝-锌合金和锌铝合金的铬酸盐转化镀层.试验方法 Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
BS EN ISO 3738-2-2006 硬质合金.洛氏硬度试验(等级A).标准试验块的准备和校验 Hardmetals - Rockwell hardness test (scale A) - Preparation and calibration of standard test blocks
BS EN ISO 3815-1-2005 锌和锌合金.用光辐射光谱测定法分析固体样品 Zinc and zinc alloys - Analysis of solid samples by optical emission spectrometry
BS EN ISO 3815-2-2005 锌和锌合金.用感应耦合等离子体光发射光谱测定法分析 Zinc and zinc alloys - Analysis by inductively coupled plasma optical emission spectrometry
BS EN ISO 3823-1-1999 牙科用旋转器械.牙钻.钢制牙钻和硬质合金牙钻 Dental rotary instruments - Burs - Steel and carbide burs
BS EN ISO 3927-2002 金属粉末(不包括硬质合金粉末).单轴向压缩时压缩性的测定 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
BS EN ISO 4524-3-1986 金属镀层.电镀金和金合金镀层测试方法.孔隙度电图试验 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Electrographic tests for porosity
BS EN ISO 4524-6-1989 金属镀层.电镀金和金合金镀层测试方法.第6部分:残留盐类测定 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Determination of the presence of residual salts
BS EN ISO 4527-2003 金属覆层.自催化(无电)镍磷合金覆层.规范和试验方法 Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods
BS EN ISO 5817-2007 焊接.钢、镍、钛和其合金的熔焊接头(束焊除外).缺陷的质量等级 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
BS EN ISO 6509-1995 金属和合金耐腐蚀性.黄铜耐脱锌性测定 Corrosion of metals and alloys - Determination of dezincification resistance of brass
BS EN ISO 683-17-1999 热处理钢、合金钢和易切削钢.滚珠轴承和滚柱轴承钢 Heat-treated steels, alloy steels and free-cutting steels - Ball and roller bearing steels
BS EN ISO 6978-2-2003 天然气.汞的测定.用碘/铂合金混和法采样汞 Natural gas - Determination of mercury - Sampling of mercury by amalgamation on gold/platinum alloy
BS EN ISO 7441-1995 金属和合金的耐腐蚀性.在露天暴露腐蚀试验中双金属腐蚀性的测定 Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests
BS EN ISO 7539-1-1988 金属和合金的腐蚀.应力腐蚀试验.第1部分:试验程序的通用指南 Corrosion of metals and alloys - Stress corrosion testing - General guidance on testing procedures
BS EN ISO 7539-2-1990 金属和合金的腐蚀.应力腐蚀试验.第2部分:弯曲梁试样的制备和使用 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of bent-beam specimens
BS EN ISO 7539-3-1990 金属和合金的耐腐蚀性.应力腐蚀试验.第3部分:U型弯曲试样的制备和使用 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of U-bend specimens
BS EN ISO 7539-4-1990 金属和合金的腐蚀.应力腐蚀试验.第4部分:轴向载荷拉伸试样的制备和使用 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of uniaxially loaded tension specimens
BS EN ISO 7539-5-1990 金属和合金的腐蚀.应力腐蚀试验.第5部分:C-环形试样的制备和使用 Corrosion of metals and alloys - Stress corrosion testing - Method for the preparation and use of C-ring specimens
BS EN ISO 7539-6-2003 金属和合金的腐蚀.应力腐蚀试验.恒定负荷或恒定位移条件下试验用预破裂试样的制备和使用 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
BS EN ISO 7539-7-2005 金属与合金的腐蚀.应力腐蚀试验.慢速率应力试验方法 Corrosion of metals and alloys - Stress corrosion testing - Method for slow strain rate testing
BS EN ISO 7787-2-2001 牙科旋转器械.切刀.实验室用硬质合金刀 Dental rotary instruments - Cutters - Carbide laboratory cutters
BS EN ISO 7787-4-2002 牙科用旋转器械.切割刀具.实验室用小型硬质合金刀具 Dental rotary instruments - Cutters - Miniature carbide laboratory cutters
BS EN ISO 8044-2000 金属和合金的腐蚀性.基本术语和定义 Corrosion of metals and alloys - Basic terms and definitions
BS EN ISO 8282-1997 牙科设备.汞和合金混合器与分配器 Dental equipment - Mercury and alloy mixers and dispensers
BS EN ISO 8442-7-2001 与食品接触的材料和制品.刀具和餐桌凹形餐具.银、其他贵金属及其合金制成的刀具的要求 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for table cutlery made of silver, other precious metals and their alloys
BS EN ISO 8565-1995 金属及合金.大气腐蚀试验.现场试验的总要求 Metals and alloys - Atmospheric corrosion testing - General requirements for field tests
BS EN ISO 898-1-1999 碳钢和合金钢制的紧固件的机械特性.螺栓、螺钉和螺柱 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs
BS EN ISO 898-5-1999 碳钢及合金钢制紧固件的机械性能.无拉伸应力下的定位螺钉和类似的螺纹紧固件 Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stresses
BS EN ISO 9400-1996 镍基合金.抗晶间腐蚀性的测定 Nickel-based alloys - Determination of resistance to intergranular corrosion
BS EN ISO 9453-2006 软钎料合金.化学成分和形式 Soft solder alloys - Chemical compositions and forms
BS EN ISO 9606-2-2004 焊工的认可试验.熔焊.铝和铝合金 Qualification test of welders - Fusion welding - Aluminium and aluminium alloys
BS EN ISO 9606-3-1999 焊工的认可测试.熔焊.铜及铜合金 Approval testing of welders - Fusion welding - Copper and copper alloys
BS EN ISO 9606-4-1999 焊工的认可测试.熔焊.镍及镍合金 Approval testing of welders - Fusion welding - Nickel and nickel alloys
BS EN ISO 9606-5-2000 焊工的认可测试.熔焊.钛和钛合金.锆和锆合金 Approval testing of welders - Fusion welding - Titanium and titanium alloys, zirconium and zirconium alloys
BS EN ISO 9692-3-2001 焊接和相关工艺.接头的准备.铝及其合金的金属极惰性气体保护焊和钨极惰性气体保护焊 Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
BS HC 100-1972 铁、镍、铜、钴和难熔金属基合金铸件的检验和试验程序 Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings
BS HC 202-1973 沉淀硬化镍基铬-铌-钼-铁-钨合金铸件规范(铬20.0、铌6.6、钼6.0、铁3.0、钨2.5) Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5)
BS HC 205-1974 沉淀硬化镍基铬-钴-钼-钛合金铸件规范(铬20、钴20、钼6、钛2 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2)
BS HC 206-1975 沉淀硬化镍基铬-钴-钼-钛合金精密铸件规范(铬20、钴20、钼6、钛2) Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)
BS HC 3-1973 1%铬钼低合金钢铸件(700牛顿/平方毫米)规范 Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm2)
BS HC 301-1973 钴基铬-镍-钨合金铸件规范(铬25.5、镍10.5、钨7.5) Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
BS HC 403-1977 高铬合金铸件铁环形坩埚规范(离心铸造)(适用于直径达400mm的活塞环) Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter)
BS HC 404-1977 铬-钼合金铸件铁环形坩埚(适用于离心铸造和砂型铸造密封环、活塞环和汽缸套筒) Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)
BS HC 502-1981 铜基铝-镍-铁合金铸件规范(620MPa)(铝9.5、镍5、铁5) Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5)
BS HR 10-1972 镍-钴-铬-钼-钛-铝耐合金坯锭、棒材、锻件和零件(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS HR 203-1972 镍-铬-钛耐热合金薄板材、薄板材和带材(镍基、Cr19.5、Ti0.4)规范 Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4)
BS HR 204-1972 镍-铬-铁-钼-钴-钨耐热合金板材,薄板材和带材(镍基、Cr22、Fe18.5、Mo9、Co1.5、W0.6)规范 Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6)
BS HR 205-1989 镍铜合金薄板材和带材:退火的(镍基、Cu31)规范 Nickel-copper alloy sheet and strip: annealed (Nickel base, Cu 31)
BS HR 206-1973 镍-钴-铬-钼-钛-铝耐热合金板材、薄板材和带材(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS HR 207-1973 镍-铁-铬-钼-铝-钛耐热合金板材、薄板材和带材(Ni/Co43.5、Cr16.5、Mo3.3、Al1.2、Ti1.2、Fe余量)规范 Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
BS HR 208-1989 镍铬铁合金薄板材、带材和板材规范:退火的(镍基、Cr15.5、Fe8) Specification for nickel-chromium-iron alloy sheet, strip and plate: annealed (Nickel base, Cr 15.5, Fe 8)
BS HR 209-1989 镍-铬-钴-钼-钛-铝耐热合金薄板材、带材和板材:软化的(镍基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)规范 Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
BS HR 240-1972 钴-铬-钨-镍-锰耐热合金板材、薄板材和带材(钴基、Cr20、W15、Ni10、Mn1.5)规范 Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15 , Ni 10, Mn 1.5)
BS HR 3-1972 镍-钴-铬-钼-钛-铝耐热合金坯锭、棒材、锻件和零件(镍基、Co20、Cr14.8、Mo05、Al4.7、Ti1.2)规范 Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8 , Mo 5, Al 4.7, Ti 1.2)
BS HR 4-1972 镍-铬-钴-铝-钼-钛耐热合金坯锭、棒材、锻件和零件(镍基、Cr15、Co14.2、Al5、Mo 4、Ti4)规范 Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2 , Al 5, Mo 4, Ti 4)
BS HR 40-1972 钴-铬-钨-镍-锰耐合金坯锭、棒材、锻件和零件(镍基、Cr20、W15、Ni10、Mn1.5)规范 Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)
BS HR 402-1973 冷加工和软化的无缝镍铬钴钛铝耐热合金管(镍基、Cr19.5、Co18.0、Ti2.5、Al1.5)规范 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS HR 403-1973 冷加工和软化的无缝镍铬钛耐热合金管(镍基、Cr19.5、Ti0.4)规范 Specification for nickel-chromium-titanium heat-resisting alloy cold-worked and softened seamless tubes (nickel base, Cr 19.5, Ti 0.4)
BS HR 404-1973 冷加工溶液处理的无缝镍钴铬钼钛铝耐热合金管(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS HR 5-1972 镍-铬-钛耐热合金坯锭、棒材、锻件和零件(镍基、Cr19.5、Ti0.4)规范 Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
BS HR 505-1981 螺纹垫圈(最大直径2mm)用镍铬铁钛铌铝耐热合金圆线材(镍基、Cr15.5、Fe7.0、Ti2.5、N6/Ta0.95、Al0.70)规范 Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts (maximum diameter 2 mm) (nickel base, Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)
BS HR 506-1989 镍-铬-钴-钛-铝耐热合金线材:软化的(镍基、Cr19.5、Co1.8、Ti2.5、Al1.5)规范 Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5)
BS HR 51-1973 耐热合金坯锭、棒材、锻件和零件(Ni25.5、Cr14.7、Ti2、Mn1.5、Mo1.2、Si0.7、V0.3、Fe余量)规范 Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 2, Mn 1.5, Mo 1.2, Si 0.7, V 0.3, Fe remainder)
BS HR 52-1973 耐热合金坯锭、棒材、锻件和零件(Ni25.5、Cr14.7、Ti1.8、Mn1.5、Mo1.2、V0.3、Fe余量)规范 Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
BS HR 53-1973 耐热合金坯锭、棒材、锻件和；零件(Ni/Co42.5、Cr12.5、Mo5.8、Ti3.0、Fe余量)规范 Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)
BS HR 55-1980 镍-铁-铬-钼-铝-钛耐热合金坯锭、棒材、锻件和部件(Ni/Co43.5、Cr16.5、Mo3.3、 Al1.2、Ti1.2、Fe 剩余量) Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3 , Al 1.2, Ti 1.2, Fe remainder)
BS HR 6-1972 镍-铬-铁-钼-钴-钨耐合金坯锭、棒材、锻件和零件(镍基、Cr21.7、Fe18.5、Mo9、Co1.5、W0.6)规范 Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
BS ISO 10270-1996 金属和合金的腐蚀.核动力反应堆用锆合金的耐水腐蚀试验 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
BS ISO 10713-1997 珠宝.金合金涂层 Jewellery - Gold alloy coatings
BS ISO 11303-2002 金属和合金的腐蚀.防大气腐蚀保护方法的选择指南 Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion
BS ISO 11438-1-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第1部分:一般要求和试样溶解 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - General requirements and sample dissolution
BS ISO 11438-2-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第2部分: 铅含量测定 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of lead content
BS ISO 11438-3-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第3部分: 锑含量测定 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of antimony content
BS ISO 11438-4-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第4部分: 锡含量测定 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tin content
BS ISO 11438-5-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第5部分:碲含量测定 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tellurium content
BS ISO 11438-6-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第6部分:铊含量测定 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of thallium content
BS ISO 11438-7-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第7部分:银含量测定 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of silver content
BS ISO 11438-8-1994 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.铟含量的测定 Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of indium content
BS ISO 11463-1996 金属与合金的腐蚀.麻点腐蚀的评估 Corrosion of metals and alloys - Evaluation of pitting corrosion
BS ISO 11782-1-1998 金属和合金的腐蚀.腐蚀疲劳试验.失效试验周期 Corrosion of metal and alloys - Corrosion fatigue testing - Cycles to failure testing
BS ISO 11782-2-1998 金属合合金的腐蚀.腐蚀疲劳试验.采用预开裂样品的裂纹扩展试验 Corrosion of metal and alloys - Corrosion fatigue testing - Crack propagation testing using precracked specimens
BS ISO 11844-1-2006 金属与合金的腐蚀.室内空气低腐蚀性分类.室内腐蚀性的测定和评估 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Determination and estimation of indoor corrosivity
BS ISO 11844-2-2006 金属与合金的腐蚀.室内空气低腐蚀性分类.室内空气中腐蚀作用的测定 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Determination of corrosion attack in indoor atmospheres
BS ISO 11844-3-2006 金属与合金的腐蚀.室内空气低腐蚀性分类.室内腐蚀作用下环境参数的测定 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Measurement of environmental parameters affecting indoor corrosivity
BS ISO 11846-1996 金属和合金的腐蚀.可溶液热处理的铝合金抗颗粒间腐蚀的测定 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
BS ISO 11873-2005 硬质合金.钴金属粉末中硫和碳含量的测定.红外线探测法 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
BS ISO 12732-2006 金属和合金腐蚀.利用双环网络法进行电化学电动势活化测量 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
BS ISO 13583-1-2001 离心铸造钢和合金制品.一般试验和公差 Centrifugally cast steel and alloy products - General testing and tolerances
BS ISO 13583-2-2003 离心铸造钢及合金产品.耐热材料 Centrifugally cast steel and alloy products - Heat resistant materials
BS ISO 13756-1998 银制珠宝合金用银的测定.采用氯化钠或氯化钾的容量方法(电势测定法) Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride
BS ISO 13899-2-2005 钢.合金钢中Mo、Nb和W含量的测定.感应耦合等离子体原子发射光谱法.Nb含量的测定 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Determination of Nb Content
BS ISO 14788-2005 连续热浸镀锌5%铝合金涂层钢薄板 Continuous hot-dip zinc-5% aluminium alloy coated steel sheet
BS ISO 15324-2001 金属和合金的腐蚀.采用滴水蒸发试验对应力腐蚀裂纹的评估 Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test
BS ISO 15329-2006 金属和合金的腐蚀.热处理铝合金的粒间腐蚀易感性评价的阳极试验 Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
BS ISO 16151-2006 金属和合金的腐蚀.干和湿条件下曝露于酸性盐喷雾中的加速循环试验 Corrosion of metals and alloys - Accelerated cyclic tests with exposureto acidified salt spray, "dry" and "wet" conditions
BS ISO 16220-2005 镁和镁合金.镁合金铸锭和铸件 Magnesium and magnesium alloys - Magnesium alloy ingots and castings
BS ISO 16468-2005 熔模铸件(钢、镍合金和钴合金).一般技术要求 Investment castings (steel,nickel alloys and cobalt alloys) - General technical requirements
BS ISO 16701-2003 金属及合金的腐蚀.调节空气中的腐蚀.暴露于间歇喷洒盐溶液和潮湿循环受控环境下的加速腐蚀试验 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
BS ISO 16784-1-2006 金属与合金的腐蚀.工业冷却水系统中的腐蚀性和污垢.开放式循环冷却水系统的污垢控制添加剂和执行腐蚀性实验 Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
BS ISO 16784-2-2006 金属及合金的腐蚀.工业冷却水系统的腐蚀性和结污.用操纵管路试验装置评估冷却水处理程序性能 Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
BS ISO 17475-2006 金属和合金的腐蚀.电化学试验方法.恒电势的和动态电势的偏振测量导则 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS ISO 17615-2007 铝和铝合金.重熔用合金铸锭.规范 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
BS ISO 17864-2006 金属和合金的腐蚀性.静电位控制下的临界点蚀温度测定 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
BS ISO 19959-2005 熔模铸件表面情况的外观检验.钢、镍合金和钴合金 Visual examination of the surface condition of investment castings - Steel, nickel alloys and cobalt alloys
BS ISO 19960-2005 有特殊物理性能的铸钢和合金 Cast steels and alloys with special physical properties
BS ISO 20552-2007 工作场所空气.汞蒸气的测定.金汞合金收集的方法和使用原子吸收光谱法或原子荧光光谱法的分析法 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
BS ISO 20703-2007 储气瓶.可再填充的焊接铝合金气瓶.设计、结构和试验 Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing
BS ISO 209-2007 铝和铝合金.化学成分 Aluminium and aluminium alloys - Chemical composition
BS ISO 23079-2005 镁和镁合金.回炉料.要求、分类和验收 Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
BS ISO 3116-2007 镁和镁合金.锻造镁合金 Magnesium and magnesium alloys - Wrought magnesium alloys
BS ISO 3160-1-1999 表壳和附件.金合金覆盖层.第1部分:一般要求 Watch-cases and accessories - Gold alloy coverings - General requirements
BS ISO 3160-2-2003 表壳和附件.金合金覆盖层.纯度、厚度、耐腐蚀性能和结合强度的测定 Watch-cases and accessories - Gold alloy coverings - Determination of fineness, thickness, corrosion resistance and adhesion
BS ISO 3928-1999 不包括硬质合金的烧结金属材料.疲劳试件 Sintered metal materials, excluding hardmetals - Fatigue test pieces
BS ISO 4381-2000 普通轴承.多层普通轴承用铅锡铸造合金 Plain bearings - Lead and tin casting alloys for multilayer plain bearings
BS ISO 4384-1-2000 普通轴承.轴承合金的硬度试验.复合材料 Plain bearings - Hardness testing of bearing metals - Compound materials
BS ISO 4498-2005 不包括硬质合金的烧结金属材料.表观硬度和显微硬度的测定 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
BS ISO 4524-2-2000 金属镀层.金及金合金电镀层的试验方法.混合流动气体(MFG)环境试验 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Mixed flowing gas (MFG) environmental tests
BS ISO 4999-2006 商品级和冲压和结构级连续热镀锡(合金)冷轧碳素薄钢板 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
BS ISO 5468-2006 带硬质合金钻头的旋转和旋转冲击式砖石砌工钻.尺寸. Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions
BS ISO 6305-2-2007 铁道部件.技术交货要求.非合金碳钢垫板 Railway components - Technical delivery requirements - Non-alloy carbon steel baseplates
BS ISO 6978-2-2003 天然气.汞的测定.用金/铂合金混汞法对汞的采样 Natural gas - Determination of mercury - Sampling of mercury by amalgamation on gold/platinum alloy
BS ISO 7141-2005 道路车辆.轻合金轮.碰撞试验 Road vehicles - Light alloy wheels - Impact test
BS ISO 7539-8-2000 金属和合金的腐蚀.应力腐蚀试验.焊件评定用试样的制备和使用 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of specimens to evaluate weldments
BS ISO 7539-9-2003 金属和合金的腐蚀.应力腐蚀试验.在加大荷载或加大位移条件下试验用预裂样品的制备和使用 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
BS ISO 7989-2-2007 钢丝和钢丝制品.钢丝的有色金属涂层.锌或锌合金涂覆 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc-alloy coating
BS L 103-1971 铝-铜(4.4)-镁(0.8)-硅(0.7)-锰(0.8)合金锻坯和锻件规范(固溶处理和室温时效) Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 105-1971 铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金管材规范(固溶处理和室温效)(壁厚度小于10mm) Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 109-1971 铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板和带材规范(溶液处理和室温时效) Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 110-1971 铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板材和带材规范(由用户进行溶液处理) Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 112-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金锻坯和锻件规范(溶液处理和沉淀处理)(适用于焊接) Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 113-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金薄板材和带材规范(溶液处理和沉淀处理)(适用于焊接) Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 114-1971 铝-镁(0.8)硅(1)-锰(0.7)合金管规范(溶液处理和沉淀处理)(壁厚度小于10mm)(适用于焊接) Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 115-1971 铝-镁(0.8)硅(1)-锰(0.7)合金板规范(溶液处理,拉伸控制及沉淀处理)(厚度小于25mm)(适用于焊接) Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 117-1975 铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:未经液压试验)(厚度小于10mm) Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
BS L 118-1975 铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:液压试验)(壁厚度小于10mm) Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
BS L 119-1975 铝-铜(5.0)-镍(1.5)-锰(0.5)-钛(0.2)-锆(0.2)-钴(0.2)-锑(0.2)合金铸锭和铸件规范(溶液处理和人工时效) Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
BS L 154-1977 铝-铜(4)-硅(1)合金铸锭和铸件规范(溶液处理和室温时效) Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)
BS L 155-1977 铝-铜(4)-硅(1)合金铸锭和铸件规范(溶液处理和人工时效) Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)
BS L 158-1978 铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理和室温时效) Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 159-1978 铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理和人工时效) Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 161-1976 规范.铝-锌(5.6)-镁(2.5)-铜(1.6)-锆(0.22)合金手工锻件和模压锻件(溶液处理和人工时效至过老化条件) Specification - Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 162-1976 规范.铝-锌(5.6)-镁(2.5)-铜(1.6)-铬(0.22)合金冷压手工锻件(溶液处理和人工时效至过老化条件) Specification - Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 163-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(溶液处理、冷加工压平和室温时效) Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated , cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 164-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(固溶处理和室温时效的) Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 165-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(固溶处理和人工时效的) Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 166-1978 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理和室温时效) Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 167-1978 铝-镀铝-铜(4.4)-镁(0.5)-硅(0.8)-锰合金紧公差薄板材和带材规范(固溶处理和人工时效的) Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 168-1978 铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金棒材和挤压型材规范(固溶处理和人工时效)(直径不超过200mm或较小的 Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 169-1986 铝-硅(7)-镁(0.6)合金铸锭和铸件规范(溶液处理和人工时效) Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and artificially aged) (Si 7, Mg 0.6)
BS L 170-1989 铝-锌(5.6)-镁(2.5)-铜(1.6)-铬(0.23)合金挤压棒材和型材规范(溶液处理和控制拉伸和人工时效)(直径或较小截 Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
BS L 171-1990 铝-锌(5.7)-镁(2.5)-锰(0.5)-铜(0.5)合金锻件规范(锻件或经过退火随后热处理锻件)(直径或较小截面尺寸小于1 Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
BS L 172-1989 铝-锌-镁-锰-铜合金挤压、轧制或锻坯规范(BS L 171锻件制造用)(Zn5.7、Mg2.7、Mn0.5、Cu0.5)(7014) Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
BS L 173-1991 冷铸用铝-硅-镁合金铸件规范.(过量条件下溶液处理和沉淀处理(T7)) Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
BS L 174-1991 砂型铸造用铝-硅-镁合金铸件规范(过量条件下溶液处理和沉淀处理(T7)) Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)
BS L 512-1973 镁-铝(6.0)-锌(1.0)合金棒材和挤压型材规范(直径不超过150mm或较小截面尺寸) Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0)
BS L 513-1973 镁-铝(6.0)-锌(1.0)合金锻坯和锻件规范 Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
BS L 514-1973 镁--锌(3.0)－锆(0.6)合金锻坯和锻件规范 Specification for forging stock and forgings of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
BS L 515-1973 镁--锌(1.25)-锆（0.6）合金锻坯和锻件规范 Specification for sheet and strip of magnesium-11/4% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
BS M 58-1986 采用硫酸处理工艺的钛和钛合金阳极涂层规范 Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process
BS M 93-2005 富镁合金的防腐蚀保护.规范 Protection of magnesium-rich alloys against corrosion - Specification
BS PAS 27-1999 承压未增塑聚氯乙烯合金(PVC-A)复合水管和弯管 Unplasticized poly(vinyl chloride) alloy (PVC-A) pipes and bends for water under pressure
BS SP 172-1999 铝或铝合金实心铆钉.采购规范 Rivets, solid, in aluminium or aluminium alloys - Procurement specification
BS SP 65-1955 航空用铝合金锥形销规范 Specification for aluminium alloy taper pins for aeronautical purposes
BS TA 38-1971 机加工用钛-铝-钼-锡-硅-碳合金棒材规范(抗拉强度1250-1420牛顿/平方毫米)(限定控制剖面25mm) Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm2) (limiting ruling section 25 mm)
BS TA 39-1971 钛-铝-钼-锡-硅-碳合金锻坯规范(抗拉强度1250-1420牛顿/平方毫米)(限定控制剖面25mm) Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm2) (limiting ruling section 25 mm)
BS TA 40-1971 机加工用钛-铝-钼-锡-硅-碳合金棒材规范(抗拉强度1205-1375牛顿/平方毫米)(限定控制剖面大于25mm,达到并含7 Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm)
BS TA 41-1971 钛铝钼锡硅碳合金锻坯规范(抗拉强度1205-1375牛顿/平方毫米)(限定控制剖面大于25mm,达到并含75mm) Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm)
BS TA 42-1971 钛-铝-钼-锡-硅-碳合金锻件规范(抗拉强度1205-1375牛顿/平方毫米)(限定控制剖面大于25mm,达到并含75mm) Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm)
BS TA 43-1972 钛-铝-锆-钼-硅合金锻坯规范(抗拉强度990-1140牛顿/平方毫米)(限定控制剖面65mm) Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
BS TA 44-1972 钛-铝-锆-钼-硅合金锻件规范(抗拉强度990-1140牛顿/平方毫米)(限定控制剖面65mm) Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
BS TA 45-1973 机加工用钛铝钼锡硅合金棒材和型材规范(抗拉强度1100-1280 N/mm<上标2>)(限定等圆断面25mm) Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 N/mm2) (limiting ruling section 25 mm)
BS TA 46-1973 机加工用钛铝钼锡硅合金棒材和型材规范(抗拉强度1050-1220 N/mm<上标2>)(限定等圆断面25mm以上100mm以下(含 Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section over 25 mm up to and including 100 mm)
BS TA 47-1973 钛铝钼锡硅合金锻坯规范(抗拉强度1050-1220 N/mm<上标2>)(限定等圆断面100mm) Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section 100 mm)
BS TA 48-1973 钛铝钼锡硅合金锻件规范(抗拉强度1050-1200 N/mm<上标2>)(限定等圆断面100mm) Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm2) (limiting ruling section 100 mm)
BS TA 49-1973 钛铝钼锡硅合金棒材和型材规范(抗拉强度1000-1200 N/mm<上标2>)(极限等圆截面100mm以上150mm以下(含150mm)) Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
BS TA 50-1973 钛铝钼锡硅合金锻坯规范(抗拉强度1000-1200 N/mm<上标2>)(限定等圆断面100mm以上150mm以下(含150mm)) Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
BS TA 51-1973 钛铝钼锡硅合金锻件规范(抗拉强度1000-1200 N/mm<上标2>)(限定等圆断面100mm以上150mm以下(含150mm)) Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
BS TA 52-1973 钛-铜合金板材和带材规范(抗拉强度690-920牛顿/平方毫米) Specification for sheet and strip of titanium-copper alloy (tensile strength 690-920 N/mm2)
BS TA 53-1973 机加工用钛-铜合金棒材和型材规范(抗拉强度650-880牛顿/平方毫米)(限定控制剖面75mm) Specification for bar and section for machining of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 54-1973 钛-铜合金锻坯规范(抗拉强度650-880牛顿/平方毫米)(限定控制剖面75mm) Specification for forging stock of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 55-1973 钛-铜合金锻件规范(抗拉强度650-880牛顿/平方毫米)(限定控制剖面75mm) Specification for forgings of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 56-1974 钛-铝-钒合金板材规范(抗拉强度895-1150MPa)(最大厚度100mm) Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS TA 57-1974 钛-铝-钼-锡-硅合金板材规范(抗拉强度1030-1220MPa)(最大厚度65mm) Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm)
BS TA 58-1974 钛-铜合金板材规范(抗拉强度520-640MPa)(最大厚度10mm) Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
BS TA 59-1980 钛-铝-钒合金板材和带材规范(抗拉强度920-1180MPa) Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa)
DD 139-1986 锌铝合金锭和铸件规范 Specification for zinc-aluminium alloy ingots and castings
DD ENV 12908-1998 铅和铅合金.用火花激发进行发射光谱分析 Lead and lead alloys. Analysis by optical emission spectrometry (OES) with spark excitation
DD ENV 13797-2001 腐蚀防护.油和气生产中含硫化氢的环境中使用的碳钢和低合金钢.材料和试验方法.指南 Corrosion protection. Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production. Materials and test methods. Guidelines
DD ENV 13800-2000 铅及铅合金.无铅矩阵分离的火焰原子吸收光谱分析法或感应耦合等离子体辐射光谱(ICP-ES)分析法 Lead and lead alloys. Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
DD ENV 14029-2001 铅和铅合金.铅基体分离后火焰原子吸收光谱分析(FAAS)或感应耦合等离子体发射光谱(ICP-ES) Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
DD ENV 14138-2001 铅及铅合金.共沉淀法分离后通过火焰原子吸收光谱法或感应耦合等离子体放射光谱法进行分析 Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co-precipitation
DD ENV 1999-1-2-2000 欧洲法规9.铝合金结构件的设计.一般规则.结构的防火设计 Eurocode 9. Design of aluminium structures. General rules. Structural fire design
DD ENV 22605-1-1992 压力用钢制品.温升参数的导出和证明.第1部分:碳和低合金钢制品的屈服或试验应力 Steel products for pressure purposes. Derivation and verification of elevated temperature properties. Yield or proof stress of carbon and low alloy steel products
FD A45-035-1999 钢产品.非合金钢的冷成型板桩.尺寸和剖面性能 Steel products - Cold-formed sheet piling of non alloy steels - Dimensions and sectional properties.
KT 1-1999 铝和铝合金 Aluminium and aluminium alloys
PD 6619-1998 铜和铜合金.材料登记和材料编号分配用条款与程序 Copper and copper alloys. Provisions and procedures for the allocation of material numbers and registration of materials
PD 6635-1999 拉伸和/或冷轧非合金钢棒材.普通棒材,不脱氧低碳钢棒材和不脱氧替代低碳钢棒材与特殊棒材.要求和试验 Non-alloy steel rod for drawing and/or cold rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod for special applications. Requirements and tests
PD 6641-1999 铜及铜合金.成份和产品概要 Copper and copper alloys. Compendium of compositions and products
PD IEC 61394-2001 架空线.铝、铝合金和钢裸导线用润滑脂的特性 Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors

德国合金标准(DIN alloy standards)
DIN 13109-1-1980 医疗器械.不镶硬合金刀片的钢丝钳 Medical instruments; wire cutting scissors without carbide inserts
DIN 13112-1-2006 医疗器械.第1部分:不镶硬质合金的解剖剪 Medical instruments - Part 1: Scissors for preparations without carbide inserts
DIN 13114-1-1980 医疗仪器.第1部分:无镶嵌硬质合金的梅奥氏剪子 Medical instruments; scissors type Mayo without carbide inserts
DIN 13133-1-2005 医疗仪器.Sims型弯形子宫剪.第1部分:不含硬质合金镶片 Medical instruments - Uterine scissors, curved on flat, type Sims - Part 1: Without carbide inserts
DIN 13134-1-1980 医疗仪器.第1部分:无镶嵌硬质合金的西姆斯氏直形子宫剪 Medical instruments; uterine scissors, straight, type Sims without carbide inserts
DIN 13461-1982 医疗器械；镶硬质合金的德巴基氏型持针器 Medical instruments; neddle holder type De Bakey with carbide inserts
DIN 14301-1985 标称压力为16的D型供水和吸水用铝合金联接器 Aluminium alloy delivery and suction coupling type D; nominal pressure
DIN 14302-1985 标称压力为16的C型供水铝合金联接器 Aluminium alloy delivery coupling type C; nominal pressure 16
DIN 14303-1985 标称压力为16、B型供水铝合金联接器 Aluminium alloy delivery coupling type B; nominal pressure 16
DIN 14306-1986 压力和抽吸用的铝合金D型刚性联轴节PN16 Aluminium alloy solid coupling type D for pressure and suction purposes; nominal pressure 16
DIN 14307-1-1985 带压力用密封圈的铝合金C型刚性联接器.标称压力16 Aluminium alloy solid coupling type C, with sealing ring for pressure purposes; nominal pressure 16
DIN 14307-2-1986 抽吸用C型、标称压力16带密封圈的铝合金刚性接头 Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16
DIN 14308-1-1985 带压力用密封圈的铝合金B型刚性联接器.标称压力16 Aluminium alloy solid coupling type B, with sealing ring for pressure purposes; nominal pressure 16
DIN 14308-2-1986 抽吸用B型、标称压力16带密封圈的铝合金刚性接头 Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16
DIN 14309-1985 标称压力为16带压力吸水密封环的A型铝合金联接器 Aluminium alloy solid coupling type A, with sealing ring for pressure and suction purposes; nominal pressure 16
DIN 14310-1986 压力和抽吸用的铝合金制有盖板的灭火水龙带D型联轴节：公称压力PN16 Aluminium alloy cap fire hose coupling typ D for pressure and suction purposes; nominal pressure 16
DIN 14311-1985 标称压力为16抽吸和压力用铝合金消防水龙带C型管接头 Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16
DIN 14312-1985 标称压力为16、压力吸水用消防软管B型铝合金联接器 Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16
DIN 14313-1989 压水和抽水用铝合金制A型盲板消防联接器.公称压力 16 Aluminium alloy cap fire hose coupling type A for pressure and suction purposes; nominale pressure 16
DIN 14317-1985 标称压力为16、带金属密封面和灰铸铁或铝合金盖的C型铝合金刚性联接器 Aluminium alloy solid coupling type C with metallic sealing area and with cast iron cover or with aluminium alloy cover, type C; nominal pressure 16
DIN 14318-1985 带铸铁或铝合金盖的有金属密封面的B型铝合金刚性联接器PN16 Aluminium alloy solid coupling type B with metallic sealing area and with cast iron cover or with aluminium alloy cover, type B; nominal pressure 16
DIN 14319-1985 铝合金带金属密封面和灰铸铁或铝合金盖的A型固定联接器.公称压力 16 Aluminium alloy solid coupling type A with metallic sealing area and with cast iron or with aluminium alloy cover, type A; nominal pressure 16
DIN 14321-1985 标称压力为16、C型抽水铝合金联接器 Aluminium alloy suction coupling type C; nominal pressure 16
DIN 14322-1989 铝合金B型抽水联接器.公称16 Aluminium alloy suction coupling type B; nominal pressure 16
DIN 14323-1985 标称压力为16、A型供水和抽水用铝合金联接器 Aluminium alloy delivery and suction coupling type A; nominal pressure 16
DIN 14330-1-1985 S 28 消防软管用标称压力PN16 C型铝合金联轴器 Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 28
DIN 14330-2-1985 S 38 消防软管用标称压力PN16 C型铝合金联轴器 Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 32
DIN 14341-1986 标称压力为16的 铝合金C-D型转接接头 Aluminium alloy C-D-adaptor for nominal pressure 16
DIN 14342-1986 标称压力为16的 铝合金B-C型转接接头 Aluminium alloy B-C-adaptor for nominal pressure 16
DIN 14343-1986 标称压力为16 的铝合金A-B型转接接头 Aluminium alloy A-B-adaptor for nominal pressure 16
DIN 1615-1984 无特殊要求的非合金钢焊接管.交货技术条件 Welded circular unalloyed steel tubes not subject to special requirements; technical delivery conditions
DIN 1687-1-1998 重金属合金的毛坯铸件.砂模铸造.一般公差及机加工余量.不适用于新设计 Rough castings of heavy metal alloys - Sand mouldings - General tolerances, machining allowances; inactive for new design
DIN 1687-3-1980 重金属合金的毛坯铸件.第3部分:重力模压铸件的一般公差及加工余量 Rough castings of heavy metal alloys; gravity die castings, general tolerances, machining allowances
DIN 1687-4-1986 重型金属合金粗铸件.压力模铸件.第4部分:一般公差、加工余量 Heavy metal alloy raw castings; pressure die castings; general tolerances, machining allowances
DIN 1688-1-1998 轻金属合金的毛坯铸件.砂模铸造.一般公差及机加工余量.不适用于新设计 Rough castings of light metal alloys - Sand mouldings - General tolerances, machining allowances; inactive for new design
DIN 1688-3-1980 轻金属合金的铸件毛坯.金属模铸造.一般公差、加工余量 Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances
DIN 1688-4-1986 轻型金属合金粗铸件.压力模铸件.第4部分:一般公差、加工余量 Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances
DIN 1707-100-2001 软钎焊合金.化学成份和形状 Soft solder alloys - Chemical compositions and forms
DIN 1729-1-1982 锻造镁合金 Wrought magnesium alloys
DIN 1732-3-2007 铝和铝合金用填充金属.第3部分:全焊金属的试件、试样和机械及技术性能 Filler metals for aluminium and aluminium alloys - Part 3: Test pieces, test specimens, mechanical and technological properties of all-weld metal
DIN 1737-2-1988 钛和钛钯合金焊接用填充金属.样本和样件的制备、全焊缝金属的机械性能 Filler metals for welding titanium and titanium-palladium alloys; sample and specimen preparation, mechanical properties of all-weld metal
DIN 1742-1971 锡压铸合金.压铸件 Tin Alloys for Pressure; Die Castings
DIN 17470-1984 加热导体合金.圆金属丝和扁平金属丝的交付技术状态 Heating conductor alloys; technical delivery conditions for round and flat wire
DIN 17580-2004 硅钙合金.交货技术条件 Calcium-Silicon - Technical delivery conditions
DIN 17611-2007 锻造铝和锻造铝合金的阳极氧化产品.交货技术条件 Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of delivery
DIN 17640-1-2004 通用铅合金 Lead alloys for general purposes
DIN 17730-1971 镍和镍铜合金.铸件 Nickel and nickel-copper alloys; castings
DIN 17741-2002 精制镍合金和低合金.化学成分 Wrought nickel alloys, low alloyed - Chemical composition
DIN 17742-2002 含铬精制镍合金.化学成分 Wrought nickel alloys with chromium - Chemical composition
DIN 17743-2002 含铜精制镍合金.化学成分 Wrought nickel alloys with copper - Chemical composition
DIN 17744-2002 含钼和铬的精制镍合金.化学成分 Wrought nickel alloys with molybdenum and chromium - Chemical composition
DIN 17745-2002 镍铁精制合金.化学成分 Wrought alloys of nickel and iron - Chemical composition
DIN 17750-2002 精制镍和镍合金板材、带材和薄板材.性能 Plates, strips and sheets of wrought nickel and nickel alloys - Properties
DIN 17751-2002 精制镍和镍合金管.性能 Tubes of wrought nickel and nickel alloys - Properties
DIN 17752-2002 精制合金和镍合金条材和棒材.性能 Rods and bars of wrought and nickel alloys - Properties
DIN 17753-2002 精制镍和镍合金线材.性能 Wires of wrought nickel and nickel alloys - Properties
DIN 17851-1990 钛合金.化学成分 Titanium alloys; chemical composition
DIN 17860-1990 钛和钛合金中厚板材、薄板材和带材.交付技术状态 Titanium and titanium alloy plate, sheet and strip; technical delivery conditions
DIN 17861-1990 钛和钛合金无缝圆管.交付技术状态 Seamless circular titanium and titanium alloy tubes; technical delivery conditions
DIN 17862-1993 钛和锻钛合金棒材.交付技术状态 Titanium and titanium alloy bars; technical delivery conditions
DIN 17864-1993 钛和可锻钛合金的铸件(自由锻造及模锻件).交付技术状态 Titanium and titanium wrought alloys forgings (hammer and drop forgings); technical delivery conditions
DIN 17865-1990 钛和钛合金铸件.精密铸件.冲压的石墨铸件 Titanium and titanium alloy investment castings and rammed graphite castings; technical delivery conditions
DIN 17866-1990 钛和钛合金焊接圆形管.交付技术状态 Welded circular titanium and titanium alloy tubes; technical delivery conditions
DIN 17869-1992 钛和钛合金的材料性能.附加说明 Material properties of titanium and titanium alloys; additional data
DIN 2302-2005 焊接消耗品.非合金和细粒钢的水下高压湿焊用焊接消耗品.水下高压湿焊用焊接消耗品的试验和鉴定的验收规范 Welding consumables - Welding consumables for underwater hyperbaric wet welding of unalloyed and fine grain steels - Acceptance specifications for testing and qualification of welding consumables for underwater hyperbaric wet welding
DIN 28031-2003 非合金钢和不锈钢制非加压容器和加工装置用焊接法兰 Weld flanges for unpressurized vessels and process apparatus of non-alloy and stainless steel
DIN 28032-2005 非合金钢制压力容器和加工装置用焊接法兰 Non-alloy steel weld flanges for pressure vessels and process apparatus
DIN 28034-2005 非合金钢制压力容器和加工装置用焊颈法兰 Non-alloy steel weld-neck flanges for pressure vessels and process apparatus
DIN 28084-3-1996 设备支承环和环支承件.第3部分:非合金钢和不锈钢搅拌器容器的尺寸和最大工作重量 Support rings and ring supports on apparatus - Part 3: Dimensions, maximum service weight for on non-alloy and stainless steel agitator vessels
DIN 28124-1-1992 非合金钢和不锈钢制非压力容器和工艺装置用人孔盖 Manhole closures for unpressurized vessels and process apparatus of nonalloy and stainless steel
DIN 28124-2-1992 非合金钢制压力容器用人孔盖 Manhole closures for pressure vessels of non-alloy steel
DIN 28136-2-2005 搅拌容器.第2部分:非合金和不锈钢容器顶盖喷嘴的位置和尺寸 Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels
DIN 28137-1-2005 搅拌器用安装凸缘.第1部分:非合金和不锈钢容器用 Mounting flanges for agitation units - Part 1: For vessels of non-alloyed and stainless steel
DIN 28140-1-2005 排泄阀用连接件.第1部分:非合金钢、不锈钢或有衬钢.尺寸配合PN10 Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10
DIN 28141-2003 非合金钢和不锈钢制容器和加工器具用连接法兰 Connecting flanges for vessels and process apparatus of non-alloy and stainless steel
DIN 29531-1990 航空航天.铝合金和镁合金铸件.技术规范. Aerospace; castings of aluminium and magnesium alloys; technical specification
DIN 29543-1990 航空航天.锻铝合金无缝承内压管材.技术规范.不适用于新设计 Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design
DIN 29544-1990 航空航天.铝和锻铝合金无缝导管.技术规范.不适用于新设计 Aerospace; seamless duct tubing of aluminium and wrought aluminium alloys; technical specification; inactive for new design
DIN 29546-1990 航空航天.锻铝合金薄片板材，中厚板材和带材；技术规范.不适用于新设计 Aerospace; wrought aluminium alloys sheet, plate and strip; technical specification; inactive for new design
DIN 29547-1990 航空航天.锻铝合金无缝结构管材.技术规范.不适用于新设计 Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design
DIN 29594-1989 航空航天.米制系列，铝合金锁环. Aerospace; aluminium alloy collars, metric series
DIN 29657-1991 航空航天.钢和镍合金无缝结构管材.技术规范 Aerospace; seamless structural tubes in steel and nickel alloys; technical specification
DIN 29732-3-1984 航空航天.带凸头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值 Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear
DIN 29733-3-1984 航空航天.沉头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值 Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear
DIN 29783-1983 航空与航天.钛及钛合金精密铸件.技术规范 Aerospace; precision castings of titanium and titanium alloys; technical specification
DIN 29850-1989 航空航天.精制铝合金的热处理 Aerospace; heat treatment of wrought aluminium alloys
DIN 29978-1994 航空航天.防腐冲孔或无孔精锻铝合金六角形膨胀式蜂窝芯棒.技术规范 Aerospace - Honeycomb cores, hexagonal expanded, in wrought aluminium alloy, corrosion protected, unperforated or perforated; technical specification
DIN 29995-1980 航空航天.重熔钢、镍合金和钴合金酸洗薄片的分离试验 Aerospace; segregation testing on etched slices of remelted steels, nickel and cobalt alloys
DIN 30999-1999 硬质合金.洛氏硬度试验(标度A和45N).硬度试验机校验用非硬质合金标准块的校准 Hardmetals - Rockwell test (scales A and 45N) - Calibration of reference blocks out of hardmetals to be used for the verification and calibration of hardness testing machines
DIN 32506-2-1981 软钎焊可软钎性的检验.铜合金试样的垂直浸渍试验.检验、评定 Testing of solderability for soft soldering; Vertical dipping test for specimens of copper alloys; Testing; Assessment
DIN 3844-1981 供暖设备用阀.带螺纹承插口的铜合金制PN16球阀.尺寸、材料 Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets; dimensions, materials
DIN 46460-2-1977 绕组线.第2部分:V 型自熔性漆包电阻合金圆线.交货技术条件 Winding Wires; Round Resistance Wires, Enamelled, Self-fluxing, Type V; Technical Conditions of Delivery
DIN 46460-3-1977 绕组线.第3部分:W 180 型温度指数为 180 的耐热漆包电阻合金圆线.交货技术条件 Winding Wires; Round Resistance Wires, Enamelled, Heat-resistant with a Temperature Index of 180, Type W 180; Technical Conditions of Delivery
DIN 46463-1981 绕组线.镍电阻合金圆裸线.尺寸、电阻值、重量 Winding wires; bare round Ni-resistance wires; dimensions, resistances, weights
DIN 48203-2-1984 精制铜合金(Bz)线和导线.交货技术条件 Wrought copper alloy (Bz) wires and conductors; technical delivery conditions
DIN 4950-1962 硬质合金刀头 Carbide tips
DIN 4966-1961 轻切削用硬质合金刀片 Carbide tips for light cutting operations
DIN 4968-1987 无固定孔倒圆角硬质合金转位式刀片 Indexable hardmetal inserts with rounded corners, without fixation hole
DIN 4971-1980 硬质合金刀片直头车刀 Straight turning tools with carbide tips
DIN 4972-1980 硬质合金刀片弯头车刀 Bent turning tools with carbide tips
DIN 4973-1980 硬质合金刀片镗刀 Boring tools with carbide tips
DIN 4974-1980 硬质合金刀片角加工用内侧车刀 Internal side turning tools for corner work with carbide tips
DIN 4975-1980 硬质合金刀片尖顶直线车刀 Pointed straight turning tools with carbide tips
DIN 4976-1980 硬质合金刀片宽面方头车刀 Wide face square nose tools with carbide tips
DIN 4977-1980 硬质合金刀片偏置车刀 Offset face turning tools with carbide tips
DIN 4978-1980 硬质合金刀片角加工用偏置车刀 Offset turning tools for corner work with carbide tips
DIN 4980-1980 硬质合金刀片偏置侧面车刀 Offset side turning tools with carbide tips
DIN 4981-1980 硬质合金刀片切断车刀 Parting-off tools with carbide tips
DIN 4982-1980 硬质合金刀片车刀.概览和标记 Turning tools with carbide tips; general survey, marking
DIN 4988-2004 带圆柱形固定孔和倒圆角的硬质合金可转位刀片 Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole
DIN 50116-1982 锌和锌合金的试验.冲击试验 Testing of zinc and zinc alloys; impact test
DIN 50154-1980 对厚度在0.179mm以下的铝和锻造铝合金薄片材和带材进行不用伸长计测量的拉力试验 Tensile test without extensometer on foils and strips of aluminium and wrought aluminium alloys with a thickness up to 0,179 mm
DIN 50463-1985 钢的试验.铁/硅合金磁性薄板密度的测定 Testing of steel; determination of the density of iron/silicon alloy magnetic sheet
DIN 50502-1998 铜和铜合金的化学分析.铜含量应不低于99.90%的非合金铜中铜含量的测定 Chemical analysis of copper and copper alloys - Determination of copper in unalloyed copper containing not less than 99,90 % of copper
DIN 50503-1998 铜和铜合金的化学分析.锻铜和铸铜合金中铜含量的测定 Chemical analysis of copper and copper alloys - Determination of copper in wrought and cast copper alloys
DIN 50504-1973 铜和铜合金的化学分析.最高含铁量为0.4% 的铜和铜使金中实际铁含量的测定.光度法 Chemical analysis of copper and copper alloys; photometric determination of iron in copper and copper alloys containing 0,4 % of iron at maximum
DIN 50505-1973 铜和铜合金的化学分析.用光测法测定最高含锰量为6%的铜合金中的锰含量 Chemical analysis for copper and copper alloys; photometric determination of manganese in copper alloys containing 6 % of manganese at maximum
DIN 50506-1973 铜和铜合金的化学分析.最高镍含量为2.5%的铜合金中实际镍含量的测定.光度法 Chemical analysis of copper and copper alloys; photometric determination of nickel in copper alloys containing 2,5 % of nickel at maximum
DIN 50507-1977 铜和铜合金的化学分析.铅含量的测定.萃取滴定法 Chemical analysis of copper and copper alloys; determination of lead, extracting-titration method
DIN 50508-1977 铜和铜合金的化学分析.合金元素锡的测定.容量分析法 Chemical analysis of copper and copper alloys; determination of tin as alloying element, volumetric method
DIN 50510-1980 铜和铜合金的化学分析.用光度测定法测定铜和铜合金中的砷含量 Chemical analysis of copper and copper alloys; determination of arsenic in copper and copper alloys, photometric method
DIN 50511-1994 铜和铜合金.磷含量的测定.钼蓝和钼钒酸盐光度测量法 Copper and copper alloys; determination of phosphorus content; molybdenium blue and molybdovanadate spectrophotometric method
DIN 50550-1985 锌和锌合金.用原子吸收光谱法测定铟和铊 Zinc and zinc alloys; determination of indium and thallium by atomic absorption spectrometry
DIN 50898-2005 电镀覆层.有辅助处理的铝和铝合金的电镀覆层.要求和试验方法 Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods
DIN 50908-1993 锻铝合金耐应力腐蚀裂缝性能的试验 Testing the resistance of aluminium wrought alloys to stress corrosion cracking
DIN 50915-1993 非合金钢和低合金钢在受到硝酸盐浸蚀作用时的耐晶间应力腐蚀裂纹的检验.焊接和非焊接材料 Testing the resistance of unalloyed and low alloy steels to intergranular stress corrosion cracking by attack of nitrate medium; welded and unwelded materials
DIN 50916-1-1976 铜合金的检验.管材、棒材和型材氨中应力腐蚀裂纹试验 Testing of copper alloys; stress corrosion cracking test in ammonia, testing of tubes, rods and profiles
DIN 50916-2-1985 铜合金的检验.用氨作应力腐蚀裂纹试验.成分的检验 Testing of copper alloys; stress corrosion cracking test using ammonia; testing of components
DIN 50923-2004 电镀层.铁或钢上带有机涂层的锌或锌合金涂层的双涂层 Electroplated coatings - Duplex coatings of zinc or zinc alloy coatings with organic coatings on iron or steel
DIN 50926-1992 金属腐蚀.非合金钢制燃料油罐底部的外加电流的阴极防腐保护 Cathodic corrosion protection of fuel oil tank bottoms
DIN 50962-1998 电镀涂层.铁和钢件上锌合金铬酸钝化涂层 Electrodeposited coatings - Chromated coatings of zinc alloys on iron and steel
DIN 50965-2000 电镀层.钢铁和铜及铜合金锡镀层 Electroplated coatings - Tin-coatings on iron steel and on copper and copper alloys
DIN 50967-2005 金属镀层.铝及铝合金上的镍和镍铬电镀层 Metallic coatings - Electrodeposited coatings of nickel and nickel plus chromium on aluminium and aluminium alloys
DIN 5134-5-1982 木材加工锯片.镶硬质合金锯齿的圆锯技术规范 Saw blades for woodworking; technical specifications for circular saw blades with hardmetal tips
DIN 5512-2-1997 有轨车辆材料.钢.第2部分:厚度<=3mm的冷轧扁平制品用非合金钢.选用标准 Materials for rail vehicles - Steels - Part 2: Unalloyed steels for cold rolled flat products 3 mm thickness; selected standard
DIN 5513-2007 有轨车辆用材料.铝和铝合金 Materials for rail vehicles - Aluminium and aluminium alloys
DIN 5515-2002 铁道车辆半成品.非合金钢的棒材和扁平制品.选择 Semiproducts for rail vehicles - Bars and flat products of unalloyed steels - Selection
DIN 5517-1-2003 铁路车辆用半成品.可锻铝合金棒材、型材及薄板.第1部分:选择 Semiproducts for railway vehicles - Bars, profiles and sheet of wrought aluminium alloys - Part 1: Selection
DIN 5520-2002 铁路车辆半成品.铝和精制铝合金板材和带材的弯曲半径 Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys
DIN 5532-1985 有轨车辆用铝合金单头管夹 Aluminium alloy pipe clips; single ended, with tightening for rail vehicles
DIN 5580-1999 有轨车辆的压缩空气装置.铝合金压力罐容器.尺寸和标识 Compressed air equipment for railway vehicles - Pressure vessels made of aluminium alloys - Dimensions, designation
DIN 58235-1-1983 医疗器械.无硬质合金镶件的Mayo-Hegar型持针器 Medical instruments; needle holder type Mayo-Hegar without carbide inserts
DIN 58236-1-1982 医疗器械；不镶硬质合金的Mathieu 型持针器 Medical instruments; needle holder type Mathieu without carbide inserts
DIN 58236-2-1979 医疗器械.第2部分:镶硬质合金的马休(Mathieu)型针托 Medical instruments; needle holder Mathieu's with carbide inserts
DIN 58252-1-2006 医疗器械.不镶硬质合金的直形外科剪刀 Medical instruments - Part 1: Surgical scissors, straight without carbide inserts
DIN 58266-2-1979 医疗器械.第2部分:镶硬质合金的克利尔-乌德(Crile-Wood)型针托 Medical instruments; needle holder Crile-Wood's with carbide inserts
DIN 58280-1-1980 医疗器械；无硬质合金刀片的的虹膜剪 Medical instruments; iris scissors without carbide inserts
DIN 58281-1-2006 医疗器械.第1部分:不镶硬质合金的斜视用剪刀 Medical instruments - Part 1: Strabismus scissors without carbide inserts
DIN 58727-2-1986 光学工程生产.第2部分:镶嵌球形硬质合金尖的平面加工销 Produktion in optical engineering: surfacing pins with spherical cemented metal carbide point
DIN 58727-3-1986 光学工程生产.第3部分:镶嵌圆柱形硬质合金尖的平面加工销 Production in optical engineering; surfacing pins with cylindrical cemented carbide point
DIN 59610-2004 铅和铅合金.通用轧制铅薄板 Lead and lead alloys - Rolled lead sheet for general purposes
DIN 59740-2004 锻镍和锻镍合金热轧薄板.尺寸及尺寸与形状公差 Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59742-2004 锻镍和锻镍合金热轧圆片坯料和环坯.尺寸及尺寸与形状公差 Circular blanks and rings of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59745-2004 锻镍和锻镍合金冷轧薄板.尺寸及尺寸与形状公差 Sheet of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
DIN 59746-2004 锻镍和锻镍合金冷轧直带形带材和薄板.尺寸及尺寸与形状公差 Strip and sheet of straightened strip sections of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
DIN 59755-1974 冷加工变形镍和镍合金管材.尺寸、偏差 Tubes of wrought nickel and nickel alloys, cold worked; dimensions, tolerances
DIN 59760-2006 热轧的可锻镍和可锻镍合金圆棒.尺寸和形式的尺寸和公差 Round bars of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59761-2006 热轧可煅镍和可煅镍合金方棒材.尺寸和形式的尺寸和公差 Square bars of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59765-1974 拉制的变形镍和镍合金圆棒材；尺寸、偏差 Rounds rods of wrought nickel and nickel alloys, drawn; dimensions, tolerances
DIN 59766-1974 拉制的变形镍和镍合金方棒材；尺寸、偏差 Square rod of wrought nickel and nickel alloys, drawn; dimensions, tolerances
DIN 59767-1974 拉制的变形镍和镍合金六角棒材.尺寸、偏差 Hexagonal rod of wrought nickel and nickel alloys, drawn; dimensions, tolerances
DIN 59768-1974 拉制的可锻镍和镍合金带锐边的矩形棒；尺寸，.公差和静态值 Rectangular bar of wrought nickel and nickel alloys, drawn with sharp edges; dimensions, tolerances, static values
DIN 59780-1974 热轧的可锻镍和镍合金圆线材.尺寸与公差 Round wire of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances
DIN 59781-1974 拉制的可锻镍和镍合金圆线材.尺寸和公差 Round wire of wrought nickel and nickel alloys, drawn; dimensions, tolerances
DIN 65021-1986 航空和航天.钢、镍和钴合金薄板.板材和带材.技术规范 Aerospace; sheet, plate and strip of steel, nickel alloys and cobalt alloys; technical specification
DIN 65033-1990 航空航天.铝合金及镁合金锻造件.技术规范(铝合金锻件的新结构不适用) Aerospace; aluminium- and magnesium-alloy forgings; technical specification
DIN 65034-1992 航空航天.钢、镍合金以及钴合金铸件.技术规范.不适用于新设计 Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design
DIN 65035-1993 航空航天.钢、镍和钴合金坯料.锻件和圆环.技术规范. Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specification
DIN 65038-1-1989 航空航天.钢、镍和钴合金棒材.第1部分:技术规范 Aerospace; steel, nickel- and cobalt-alloy bars; technical specification
DIN 65038-2-1983 航空航天.航空用钢、镍合金和钴合金棒材.技术规范.第2部分:取样 Aerospace; bars of steel, nickel alloys and cobalt alloys for aircraft; technical specification; sampling
DIN 65039-1983 航空和航天.钛及钛合金薄板、板材和带材.技术规范 Aerospace; sheets, plates and strips of titanium and titanium alloys; technical specification
DIN 65040-1983 航空航天.钛和钛合金棒材、环形件、锻坯和锻件.技术规范 Aerospace; bars, rings, forgingstock and forgings of titanium and titanium alloys; technical specification
DIN 65080-1988 航空航天.铝和铝合金的硷浸洗.代号0110 Aerospace; alkaline pickling of aluminium and aluminium alloys; code number 0110
DIN 65083-1986 航空和航天.钛及钛合金铸件的热处理 Aerospace; heat treatment of castings of titanium and titanium alloys
DIN 65084-1990 航空航天.锻造钛和钛合金的热处理 Aerospace; heat treatment of wrought titanium and titanium alloys
DIN 65113-1990 航空航天；铝和铝塑性合金棒和压制型材.技术规范.不适于新结构 Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification; inactive for new design
DIN 65158-1993 航空航天.带平圆头自锁机构的铝合金盲铆钉 Aerospace; blind rivets of aluminium alloy with flat round head self-locking device
DIN 65159-1993 航空航天.带自锁机构的100°沉头铝合金盲铆钉 Aerospace; blind rivets of aluminium alloy with 100° countersunk head and self-locking device
DIN 65166-1986 航空和航天.锻造铝合金楔形材.技术规范 Aerospace; wrought aluminium alloy wedge; technical specifications
DIN 65174-1991 航空航天.钛和钛合金圆棒材.尺寸，质量 Aerospace; round bars of titanium and titanium alloys; dimensions, masses
DIN 65177-1986 航空和航天.带MJ螺纹、缩颈、标称抗拉强度1100MPa、温度315 ℃以下 、钛合金制六角头螺栓 Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C
DIN 65179-1993 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短螺纹长度MJ螺纹带内补偿十字形筋状传动结构的 Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65186-1990 航空航天.锻铝合金薄板和带材制的型材.技术规范.不适用于新设计 Aerospace; wrought aluminium alloy sheet and strip shaped profiles (sections); technical specification; inactive for new design
DIN 65187-1986 航空航天.复合材料用带净孔的铝合金嵌件 Aerospace; inserts for composite materials, with clearance hole, aluminium alloy
DIN 65188-1986 航空航天.螺钉锁紧嵌件.铝合金复合材料制.带MJ螺纹.小结构封闭式. Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy
DIN 65189-1986 航空航天.复合材料用的铝合金制的螺钉锁紧开口式的带MJ螺纹的嵌件 Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy
DIN 65190-1986 航空和航天.复合材料用的铝合金制的螺钉锁紧封闭式的带MJ螺纹的嵌件 Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy
DIN 65197-1989 航空航天.制螺钉用的钛合金圆棒料及线材.尺寸和质量 Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses
DIN 65207-1987 航空航天.可锻铝合金薄板折叠型面（截面）的公差 Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections)
DIN 65236-1988 航空航天.钢丝.镍和钴合金丝材.技术规范 Aerospace; steel, nickel- and cobalt-alloy wire; technical specification
DIN 65249-1987 航空航天.铜合金制的MJ螺纹自锁六角头螺母.等级:400MPa/120℃ Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 °C
DIN 65250-1989 航空航天.钛及钛合金制无缝内压力管.尺寸和质量 Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses
DIN 65258-1989 航空航天.米制系列铝和铝合金100°沉头铆钉 Aerospace; rivets, 100° countersunk head, aluminium and aluminium alloys; metric series
DIN 65259-1989 航空航天.米制系列铝和铝合金100°沉头小头铆钉 Aerospace; rivets, 100° countersunk head, reduced, aluminium and aluminium alloys; metric series
DIN 65260-1989 航空航天.米制系列铝和铝合金通用头铆钉 Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series
DIN 65265-1998 航空航天.钛合金制螺纹接近顶部的MJ螺纹六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65268-1986 航空和航天.MJ 螺纹、短螺纹、钛合金制、温度315℃以下、标称抗拉强度1100MPa 六角头螺栓. Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 6527-2002 实心硬质合金梯级直柄端铣刀.尺寸 Solid hardmetal end mills with stepped parallel shank - Dimensions
DIN 6528-2002 实心硬质合金连续直柄端铣刀.尺寸 Solid hardmetal end mills with continuous parallel shank - Dimensions
DIN 65289-1987 航空和航天.公称抗拉强度1100MPa使用温度为315℃以下的钛合金制短螺纹长度MJ螺纹的带有筋状翼形的扭矩调节 Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 6529-1992 带平行刀杆的整体硬质合金立铣刀.交付技术状态 Parallel shank solid hardmetal end mills; technical delivery conditions
DIN 65324-1993 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短长度MJ螺纹带内补偿十字形筋状传动结构的紧公 Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65338-1993 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制带肩的短长度MJ螺纹紧公差六角头螺栓 Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65348-1988 航空航天.钛合金无缝内承压管.技术规范 Aerospace; seamles internal pressure tubes in titanium alloys; technical specification
DIN 6535-1992 硬质合金麻花钻和立铣刀的平行刀杆.尺寸 Parallel shanks for hardmetal twist drills and end mills; dimensions
DIN 65355-1987 航空航天.米制系列可锻铝合金制铆钉杆套. Aerospace; collars, metric series, wrought aluminium alloy
DIN 6537-1993 台阶式直柄整体硬质合金麻花钻.尺寸 Solid-hardmetall twist drills with stepped parallel shank; dimensions
DIN 65379-1992 航空航天.镍合金制100度沉头铆钉 Aerospace; rivets, countersunk 100°, nickel alloys
DIN 6538-1-1993 加强直柄带硬质合金切削刃的麻花钻.尺寸 Twist drills with hardmetal cutting edges with reinforced parallel shank; dimensions
DIN 6539-1991 带连续直柄的整体硬质合金麻花钻.尺寸 Continuous parallel shank solid hardmetal twist drills; dimensions
DIN 65399-1988 航空航天.可锻铝合金100°沉头铆钉 Aerospace; rivets, countersunk 100°, wrought aluminium alloys
DIN 6540-1-1993 符合DIN 6537和DIN 6539的整体硬质合金麻花钻的交货技术条件.要求 Technical delivery conditions for solid hardmetal twist drills according to DIN 6537 and DIN 6539; requirements
DIN 6540-2-1993 符合DIN 6537和DIN 6539的整体硬质合金麻花钻的交货技术条件.检验 Technical delivery conditions for solid hardmetal twist drills according to DIN 6537 and DIN 6539; inspection
DIN 65436-1989 航空航天；钛和钛合金的标准件质量(STQ)和圆盘质量(DQ).要求和试验 Aerospace; standard quality (STQ) and disc quality (DQ) of titanium and titanium alloys; requirements and tests
DIN 65438-1993 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短螺纹长度的MJ螺纹紧公差十二角头螺栓 Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65442-1993 航空航天.使用温度315℃以下公称抗拉强度1550MPa耐蚀镍合金制中长等度MJ螺纹的紧公差十二角头螺栓 Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 °C
DIN 65444-1993 航空航天.米制系列镍合金100°沉头铆钉 Aerospace; rivets, 100° countersunk head, nickel alloy, metric series
DIN 65445-1987 航空航天.镍合金制米制系列小埋头铆钉100° Aerospace; rivets, 100° reduced countersunk head, metric series, nickel alloys
DIN 65446-1993 航空航天.米制系列镍合金通用头铆钉 Aerospace; rivets, universal head, nickel alloys, metric series
DIN 65455-1990 航空航天.钢.镍.钛合金无缝管材.超声波检验 Aerospace; seamless tubes in steel, nickel and titanium alloys; ultrasonic inspection
DIN 65460-1988 航空航天.铝和铝合金的酸浸洗.也适用于电阻焊.代号0100 Aerospace; acid pickling of aluminium and aluminium alloys, also for resistance welding; code number 0100
DIN 65464-1990 航空航天.公称抗拉强度1100Pa 使用温度在315℃以下的钛合金制环锁紧的MJ螺纹螺柱 Aerospace; studs with MJ thread, ring locked, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65471-1991 航空航天.钛和钛合金焊接用金属填料.焊条和焊丝.尺寸，质量 Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses
DIN 65500-1984 航空和航天.带MJ螺纹铝合金扁六角螺母 Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy
DIN 65515-1984 航空和航天.带内细齿和MJ螺纹、短螺纹、钛合金制、标称抗拉强度1100MPa、温度315℃以下凸圆头螺栓. Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65517-2002 航空航天.温度可达315℃的标称抗拉强度为1100MPa的钛合金短螺纹带内双六角和MJ螺纹的紧公差圆头螺栓 Aerospace - Cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65518-1984 航空和航天.带MJ螺纹、短螺纹、钛合金制、标称抗拉强度1100MPa、温度315℃以下盘头开槽 TORQ-SET (ACR)螺拴 Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65526-1998 航空航天.钛合金制带短长度MJ螺纹的紧公差六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65536-1-1986 航空航天.铜合金用螺纹锁紧的螺纹衬套.等级:1100MPa/425℃ Aerospace; inserts, helical coil threads, screw-locking, copper alloy; class: 1100 MPa/425 C
DIN 65536-2-1986 航空航天.铜合金用螺纹锁紧的螺纹衬套.组件和专用工具 Aerospace; inserts, helical coil threads, screw-locking, copper alloy; assembly and special tools
DIN 65537-1987 航空航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短长度MJ螺纹的带双六角套筒的凸圆头螺 Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 65538-1987 航空和航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短长度MJ螺纹的带双六角套筒的紧公差 Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 65541-1987 航空和航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制全攻螺纹的MJ螺纹的带有筋状翼形的扭 Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 65542-1987 航空航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短螺纹长度MJ螺纹的带有筋状翼形的扭矩 Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
DIN 65547-1987 航空航天.钛合金制米制系列凸头紧公差铆钉 Aerospace; rivets, close tolerance, with protruding head, metric series, titanium alloy
DIN 65548-1987 航空航天.钛合金制米制系列100°平头紧公差铆钉 Aerospace; rivets, close tolerance with 100° flush head, metric series, titanium alloy
DIN 65549-1987 航空航天.钛合金制米制系列130°埋头紧公差铆钉 Aerospace; rivets, close tolerance with 130° flush head, metric series, titanium alloy
DIN 65557-1989 航空和航天.公称抗拉强度1100MPa.使用温度在315℃以下钛合金制全攻螺纹MJ螺纹的带肋翼的扭矩调节十字槽盘头 Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65558-1989 航空航天.公称抗拉强度1100MPa.使用温度在315℃以下钛合金制全攻螺纹MJ螺纹的带肋翼的扭矩调节十字槽沉头螺 Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65581-1992 航空航天.米制系列的钛合金制紧公差铆钉和纯钛销套.技术规范 Aerospace; titanium-alloy close-tolerance rivets and pure-titanium collars, metric series; technical specification
DIN 65582-1990 航空航天.铝和镁合金铸件的热处理 Aerospace; heat treatment of aluminium- and magnesium-alloy castings
DIN 6590-1986 平面刃硬质合金无固定孔转位式刀片 Indexable hardmetall (carbide) inserts with wiper edges, without fixation hole
DIN 8010-1963 钻头用硬质合金刀头.顶角115°重载荷 Carbide Tips for Drills; Point Angle 115° for Heavy Loading
DIN 8012-1972 中心点用硬质合金顶尖 Carbide Inserts for Centre Points
DIN 8013-1963 钻头用硬质合金刀头.顶角85°轻载荷 Carbide Tips for Drills; Point Angle 85° for Light Loading
DIN 8022-1981 镶硬质合金刀片的筒形扩孔钻 Shell core drills with hard metal tips
DIN 8026-1979 镶硬质合金刀片的莫氏锥柄开槽端铣刀 Slotting end mills with morse taper shanks, with carbide tips
DIN 8027-1979 镶有硬质合金刀片的直柄开槽端铣刀 Slotting end mills with parallel shanks, with carbide tips
DIN 8032-1983 硬质合金旋转锉.术语、名称、概要 Hardmetal burrs; terminology, nomenclature, general survey
DIN 8033-1-1983 硬质合金毛刺刀.第1部分:技术要求 Hardmetal burrs; technical requirements
DIN 8033-10-1983 硬质合金旋转锉.圆弧头旋转锉 Hardmetal burrs; arch round nose burrs
DIN 8033-12-1983 硬质合金旋转锉.椭圆形旋转锉 Hardmetal burrs; oval burrs
DIN 8033-2-1983 硬质合金毛刺刀.第2部分:圆柱形毛刺刀 Hardmetal burrs; cylindrical burrs
DIN 8033-3-1983 硬质合金毛刺刀.第3部分:圆锥形刀尖毛刺刀 Hardmetal burrs; cylindrical round nose burrs
DIN 8033-4-1983 硬质合金毛刺刀.第4部分:尖锥形刀尖 Hardmetal burrs; conical pointed nose
DIN 8033-5-1983 硬质合金毛刺刀.第5部分:圆锥形刀尖毛刺刀 Hardmetal burrs; conical round nose burrs
DIN 8033-6-1983 硬质合金毛刺刀.第6部分:60°和 90°锥形毛刺刀 Hardmetal burrs; 60- and 90- degree cone burrs
DIN 8033-7-1983 硬质合金毛刺刀.第7部分:倒锥形毛刺刀 Hardmetal burrs; inverted cone burrs
DIN 8033-8-1983 硬质合金毛刺刀.第8部分:球形毛刺刀 Hardmetal burrs; spherical burrs
DIN 8033-9-1983 硬质合金毛刺刀.第9部分:拱形刀尖毛刺刀 Hardmetal burrs; arch pointed nose burrs
DIN 8037-1971 金属钻孔加工用镶硬质合金钻尖的平行柄麻花钻 Twist Drills with Parallel Shank with Carbide Tips for Drilling Metal
DIN 8038-1971 （热固性）塑料钻孔加工用镶硬质合金钻尖的直柄麻花钻 Twist Drills with Parallel Shank with Carbide Tips for Drilling Plastics (Thermosetting Plastics)
DIN 8041-1971 金属钻孔加工用镶硬质合金钻尖的莫氏锥形柄麻花钻 Twist Drills with Morse Taper Shank with Carbide Tips for Drilling Metal
DIN 8044-1982 镶有硬质合金刀头的直柄端铣刀 End mills with parallel shank, with hardmetal tips
DIN 8045-1982 镶有硬质合金刀头的莫氏锥柄端铣刀 End mills with Morse taper shank, with hardmetal tips
DIN 8047-1956 镶硬质合金刀片侧铣刀 Side Milling Cutters; Carbide-tipped
DIN 8048-1956 带可换刀片的侧铣刀.硬质合金刀片 Side Milling Cutters with Exchangeable Blades; Carbide-tipped
DIN 8050-1997 硬质合金短刀片直柄铰刀 Machine-reamers with parallel shanks with carbide tips, with short cutting part
DIN 8051-1979 莫氏锥柄镶硬质合金刀片的短刃机用铰刀 Machine-reamers with Morse taper shank, with carbide tips, with short cutting part
DIN 8054-1979 硬质合金刀片的筒形铰刀 Shell reamers with carbide tips
DIN 8056-1980 带硬质合金刀片的榫传动的空心端铣刀 Shell end cylindrical milling cutters with tenon drive, with carbide tips
DIN 8063-11-1980 未增塑聚氯乙烯(刚性 PVC)压力管道的管道连接和管道配件.第11部分:粘合用基体为铜锌合金(黄铜)的套管尺寸 Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions
DIN 8083-1982 镶硬质合金锯齿的木材加工圆形锯片.尺寸和齿数 Circular saw blades for woodworking, with hardmetal tips; dimensions, number of teeth
DIN 8090-1981 硬质合金刀片的短型铰刀 Stub reamers with hard metal tips
DIN 8093-1997 硬质合金长刀片直柄铰刀 Machine-reamers with parallel shanks with carbide tips, with long cutting part
DIN 8094-1979 硬质合金长切削刀片的莫氏锥柄的机器铰刀 Machine-reamers with morse taper shank, with carbide tips, with long cutting part
DIN 8141-1-1993 ISO米制螺纹.铝铸造合金的过盈配合用粗牙和细牙螺纹.标称直径5mm至16mm.标称尺寸、尺寸公差和极限偏差 ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes
DIN 8141-2-1993 ISO米制螺纹.铝铸造合金的过盈配合用粗牙和细牙螺纹.标称直径5mm至16mm.内螺纹和外螺纹量规 ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; gauges for internal and external threads
DIN 81411-1977 铜锌合金制销钉 Pin bolts, made of copper-zinc-alloy
DIN 82101 Berichtigung 1-2006 提升、拖引、捆索用元件.D形钩环.非合金优质钢.DIN 82101-2005的技术勘误 Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel, Corrigenda to DIN 82101:2005-09
DIN 82101-2005 提升、拖引、捆索用元件.D形钩环.非合金优质钢 Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel
DIN 85004-2 Berichtigung 1-2007 铜镍合金管.第2部分:设计、制造和测试的基本原则.技术勘误DIN 85004-2-2006 Pipelines of copper-nickel-alloys - Part 2: Basic principles for design and fabrication, testing, Corrigenda to DIN 85004-2:2006-03
DIN 85004-2-2006 铜-镍合金管.第2部分:设计、制造和试验基本原则 Pipelines of copper-nickel-alloys - Part 2: Basic principles for design and fabrication, testing
DIN 85004-4-2002 铜镍合金管.第4部分:管件技术规范 Pipelines made of copper-nickel-alloys - Part 4: Technical specification for tubes
DIN 85004-9-1997 铜-镍合金管道.第9部分:透视检验总则 Pipelines of copper-nickel-alloys - Part 9: General principles for radiographic testing
DIN 86021-2002 铜合金铸造法兰.公称压力为10、16、25的法兰设计原则 Cast flanges of copper alloys - Principles of design for nominal pressure 10, 16, 25
DIN 86037-1-1995 铜镍合金管道的活套法兰和焊接凸肩.第1部分:组装 Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 1: Assembly
DIN 86037-2-1995 铜镍合金管道的活套法兰和焊接凸肩.第2部分:焊接凸肩 Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 2: Welding necks
DIN 86037-3-1995 铜镍合金管道的活套法兰和焊接凸肩.第3部分:活套法兰 Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 3: Loose flanges
DIN 86056-2001 钢管和铜或铜合金管用锁紧螺母和密封圈的引入管套筒 Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
DIN 86086-1996 与铜镍合金管对焊的配件.交货技术要求 Fittings for butt welding into copper-nickel-alloy pipelines - Technical specifications
DIN 86087-1996 与铜镍合金管路对接焊的配件.鞍形连接件 Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections
DIN 86088-1996 与精制铜合金管路对接焊的配件.三通 Fittings for butt welding into wrought copper alloy pipelines - Tees
DIN 86089-1996 与铜镍合金管路对接焊的配件.同心异径管 Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers
DIN 86090-1996 与铜镍合金管路对接焊的配件.管弯头 Fittings for butt welding into copper-nickel-alloy pipelines - Elbows
DIN 9003-1-1984 航空航天.钢制和耐热合金的薄板、板材和带材的弯曲、弯曲半径、设计指导说明 Aerospace; bending of sheets, plates and strips of steel and heat-resisting alloys, bending radii, directions for design
DIN 9430-1-1984 航空航天.轻金属半成品的取样.锻造铝合金、钛和钛合金.概述 Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys, titanium and titanium alloys; general
DIN 9430-2-1984 航空航天.轻金属半成品的取样.锻造铝合金 Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys
DIN 9430-3-1984 航空航天.轻金属半成品的取样.钛和钛合金 Aerospace; sampling of semi-finished products in light metals; titanium and titanium alloys
DIN CEN/TS 13388-2004 铜和铜合金.产品和组分概要 Copper and copper alloys - Compendium of compositions and products; German version CEN/TS 13388:2004
DIN CEN/TS 13547-2007 工业阀门.铜合金球闸阀 Industrial valves - Copper alloy ball valves; German version CEN/TS 13547:2006
DIN CEN/TS 14938-2-2006 铜和铜合金.测定铋含量.第2部分:火焰原子吸收光谱法(FAAS) Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method; German version CEN/TS 14938-2:2006
DIN CEN/TS 15022-4-2007 铜和铜合金.测定锡含量 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS); German version CEN/TS 15022-4:2006
DIN CEN/TS 15023-3-2007 铜和铜合金.测定镍含量.火焰原子吸收光谱测定法(FAAS) Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometry method (FAAS); German version CEN/TS 15023-3:2006
DIN CEN/TS 15025-2007 铜和铜合金.镁含量测定.火焰原子光谱测定法(FAAS) Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS); German version CEN/TS 15025:2006
DIN EN 10016-1-1995 拉拔和/或冷轧非合金钢棒.第1部分:一般要求 Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements; German version EN 10016-1:1994
DIN EN 10016-2-1995 拉拔和/或冷轧非合金钢棒.第2部分:普通钢棒的特殊要求 Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purpose rod; German version EN 10016-2:1994
DIN EN 10016-3-1995 拉拔和/或冷轧用非合金钢棒.第3部分:沸腾和沸腾置换低碳钢棒材的特殊要求 Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod; German version EN 10016-3:1994
DIN EN 10016-4-1995 拉拔和/或冷轧非合金钢棒.第4部分:专用钢棒的特殊要求 Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications; German version EN 10016-4:1994
DIN EN 10025-2-2005 结构钢制热轧产品.第2部分:非合金结构钢交货技术条件 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels; German version EN 10025-2:2004
DIN EN 10028-2 Berichtigung 1-2006 压力容器用扁平钢轧材.第2部分:具有规定的耐高温性能的非合金钢与合金钢 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003 - Corrigenda to DIN EN 10028-2:2003-09; German version EN 10028-2:2003/AC:2005
DIN EN 10028-2-2003 压力容器用扁平钢轧材.第2部分:具有规定的耐高温性能的非合金钢与合金钢 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003
DIN EN 10028-4 Berichtigung 1-2006 压力容器用扁平钢轧材.第4部分:具有规定的低温特性的镍合金钢.DIN EN 10028-4-2003勘误 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties; German version EN 10028-4:2003, Corrigenda to DIN EN 10028-4:2003:09; German Version EN 10028-4:2003/AC:2005
DIN EN 10028-4-2003 压力容器用扁平钢轧材.第4部分:具有规定的低温特性的镍合金钢 Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties; German version EN 10028-4:2003
DIN EN 10051-1997 无涂层连续热轧非合金和合金钢板材、薄板材和带材.尺寸和外形公差 (包括修改件 A1:1997); 德文版本 EN 1005 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances of dimensions and shape (includes Amendment A1:1997); German version EN 10051:1991 + A1:1997
DIN EN 10083-2-2006 淬火和回火钢.第2部分:非合金钢交货技术条件 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels; English version of DIN EN 10083-2:2006-10
DIN EN 10083-3-2007 淬火和回火钢.第3部分:合金钢交货的技术条件 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels; English version of DIN EN 10083-3:2007-01
DIN EN 10090-1998 内燃机阀门用钢及合金 Valve steels and alloys for internal combustion engines; German version EN 10090:1998
DIN EN 10095-1999 耐热钢和镍合金 Heat resisting steels and nickel alloys; German version EN 10095:1999
DIN EN 1011-4-2001 焊接.焊接金属材料推荐标准.第4部分:铝和铝合金电弧焊 Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; German version EN 1011-4:2000
DIN EN 10184-2006 黑色金属材料的化学分析.非合金钢铁中磷测定.钼兰分光光度测量法 Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method; English version of DIN EN 10184:2006-05
DIN EN 10210-1-2006 非合金结构钢和细晶结构钢热成型空心型件.第1部分:交货技术要求 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions; English version of DIN EN 10210-1:2006-07
DIN EN 10210-2-2006 非合金和细晶粒结构钢的热精加工空心结构型材.第2部分:公差、尺寸和截面特性 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10210-2:2006-07
DIN EN 10216-1-2004 压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004
DIN EN 10216-2-2007 压力用无缝钢管.交货技术条件.第2部分:带特定高温性能的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007
DIN EN 10216-3-2004 压力载荷用无缝钢管.交货技术条件.第3部分:合金细粒钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004
DIN EN 10216-4-2004 压力载荷用无缝钢管.交货技术条件.第4部分:带特定低温性能的非合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004
DIN EN 10217-1-2005 压力用途焊接钢管.交货技术条件.第1部分:具有室温下规定性能的非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002 + A1:2005
DIN EN 10217-2-2005 压力用途焊接钢管.交货技术条件.第2部分:具有较高温度下规定性能的电焊非合金和合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002 + A1:2005
DIN EN 10217-3-2005 压力用途焊接钢管.交货技术条件.第3部分:细粒合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002 + A1:2005
DIN EN 10217-4-2005 压力用途焊接钢管.交货技术条件.第4部分:具有低温下规定性能的电焊非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002 + A1:2005
DIN EN 10217-5-2005 压力用途焊接钢管.交货技术条件.第5部分:具有较高温度下规定性能的埋弧焊接非合金和合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002 + A1:2005
DIN EN 10217-6-2005 压力用途焊接钢管.交货技术条件.第6部分:具有低温下规定性能的埋弧焊接非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002 + A1:2005
DIN EN 10219-1-2006 非合金钢和细晶粒钢的冷成形焊接空心结构型材.第1部分:交货技术要求 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions; English version of DIN EN 10219-1:2006-07
DIN EN 10219-2 Berichtigung 1-2007 非合金结构钢和细晶粒结构钢的冷成形结构空心型材.第2部分:公差、尺寸和截面特性.DIN EN 10219-2-2006的技 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:2006, Corrigenda to DIN EN 10219-2:2006-07
DIN EN 10219-2-2006 非合金结构钢和细晶粒结构钢的冷成形结构空心型材.第2部分:公差、尺寸和分段性能 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10219-2:2006-07
DIN EN 10223-1-1998 栅栏用钢丝和钢丝制品.第1部分:锌和锌合金涂层的带刺钢丝 Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire; German version EN 10223-1:1997
DIN EN 10224-2005 水和其他水成液输送用非合金管和配件.交货技术条件 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10224:2002 + A1:2005
DIN EN 10244-2-2001 钢丝和钢丝产品.钢丝有色金属涂层.第2部分:锌和锌合金涂层 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; German version EN 10244-2:2001
DIN EN 10248-1-1995 非合金钢热轧板桩.第1部分:交货技术条件; 德文版本 EN 10248-1:1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions; German version EN 10248-1:1995
DIN EN 10248-2-1995 非合金钢热轧板桩.第2部分:外形和尺寸公差; 德文版本 EN 10248-2:1995 Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions; German version EN 10248-2:1995
DIN EN 10249-1-1995 非合金钢冷成型板桩.第1部分:交货技术条件; 德文版本 EN 10249-1:1995 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions; German version EN 10249-1:1995
DIN EN 10249-2-1995 非合金钢冷成型板桩.第2部分:外形和尺寸公差; 德文版本 EN 10249-2:1995 Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions; German version EN 10249-2:1995
DIN EN 10250-2-1999 一般工程用自由锻钢锻件.第2部分:非合金钢和特种钢 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels; German version EN 10250-2:1999
DIN EN 10250-3-1999 普通工程用开式模锻钢件.第3部分:特种合金钢 Open die steel forgings for general engineering purposes - Part 3: Alloy special steels; German version EN 10250-3:1999
DIN EN 10255-2007 适合焊接和车螺纹的非合金钢管.交货技术条件 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions; German version EN 10255:2004 + A1:2007
DIN EN 10257-1-1998 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第1部分:陆地铺设的电缆 Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 1: Land cables; German version EN 10257-1:1998
DIN EN 10257-2-1998 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第2部分:海底铺设电缆 Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 2: Submarine cables; German version EN 10257-2:1998
DIN EN 10264-2-2002 钢丝和钢丝产品.绳索用钢丝.第2部分:一般应用绳索用冷拉非合金钢丝; 德文版本 EN 10264-2:2002 Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloyed steel wire for ropes for general applications; German version EN 10264-2:2002
DIN EN 10264-3-2003 钢丝和钢丝产品.钢丝绳用钢丝.第3部分: 重型装置用圆形和异型非合金钢丝 Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications; German version EN 10264-3:2002
DIN EN 10269 Berichtigung 1-2006 具有规定高温和/或低温性能的紧固件用钢和镍合金 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, German version EN 10269:1999 + A1:2006, Corrigenda to DIN EN 10269:2006-07; German version EN 10269:1999/A1:2006/AC:2006
DIN EN 10269 Berichtigung 2-2007 专用高温和/或低温性能的紧固件用钢和镍合金 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:1999 + A1:2006, Corrigenda to DIN EN 10269:2006-07
DIN EN 10269-2006 具有规定高温和/或低温性能的紧固件用钢和镍合金(包括修改件A1-2006和技术勘误Ber 1-2006-10 + Ber 2-2007- Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (includes Amendment A1:2006 and Corrigenda Ber 1:2006-10 + Ber 2:2007-02); English version of DIN EN 10269:2006-07
DIN EN 10270-1-2001 机械弹簧钢丝.第1部分:铅淬火冷拉制非合金钢丝 Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed steel wire; German version EN 10270-1:2001
DIN EN 10294-1-2005 机制空心棒.技术交货条件.第1部分:非合金和合金钢.德文版本 EN 10294-1-2005 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels; German version EN 10294-1:2005
DIN EN 10296-1-2004 机械工程和一般工程用焊接圆钢管.交货技术条件.第1部分:非合金及合金钢管 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes; German version EN 10296-1:2002
DIN EN 10297-1-2003 机械和工程通用无缝环形钢管.交货技术条件.第1部分:非合金和合金钢管 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes; German version EN 10297-1:2003
DIN EN 10302-2002 耐蠕变钢、镍和钴合金; 德文版本 EN 10302:2002 Creep resisting steels, nickel and cobalt alloys; German version EN 10302:2002
DIN EN 10315-2006 使用临近技术用X射线荧光光谱法(XRF)分析高合金钢的常规法 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique; English version of DIN EN 10315:2006-10
DIN EN 10335-2005 包装用钢.与人和动物用食品、产品和饮料接触的扁平钢制品.非合金电解铬/氧化铬镀钢 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel; German version EN 10335:2005
DIN EN 10341-2006 以半成品状态交付的电冷轧非合金和合金钢板材和带材 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state Enlish version of DIN EN 10341:2006-08
DIN EN 1057-2006 铜和铜合金.卫生和供暖设备中传输水和气体的无缝铜圆管 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications English version of DIN EN 1057:2006-08
DIN EN 1092-3-2004 法兰及其连接件.PN标注的管道、阀门、配件和附件用圆形法兰.第3部分:铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
DIN EN 1092-4-2002 法兰及其连接件.按PN标志的管道、阀门、配件和附件用圆形法兰.第4部分:铝合金法兰; 德文版本 EN 1092-4:200 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002
DIN EN 1172-1996 铜和铜合金.建筑用薄板和带材 Copper and copper alloys - Sheet and strip for building purposes; German version EN 1172:1996
DIN EN 1173-1995 铜和铜合金.材料状态或回火硬度标识 Copper and copper alloys - Material condition or temper designation; German version EN 1173:1995
DIN EN 1179-2003 锌和锌合金.粗锌 Zinc and zinc alloys - Primary zinc; German version EN 1179:2003
DIN EN 12020-1-2001 铝和铝合金.EN AW-6060和EN AW-6063合金挤压精确截面.第1部分:检验和交货技术条件 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery; German version EN 12020-1:2001
DIN EN 12020-2-2001 铝和铝合金.EN AW-6060和EN AW-6063规定的合金挤压精确截面.第2部分:尺寸和形状公差 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form; German version EN 12020-2:2001
DIN EN 12060-1998 锌和锌合金.取样方法.规范 Zinc and zinc alloys - Method of sampling - Specifications; German version EN 12060:1997
DIN EN 1213-1999 建筑阀门.建筑物饮用水铜合金截止阀.试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999
DIN EN 12163-1998 铜和铜合金.一般用途的棒材; 德文版本 EN 12163:1998 Copper and copper alloys - Rod for general purposes; German version EN 12163:1998
DIN EN 12164-2000 铜和铜合金.高速切削用棒材(包括修改件A1: 2000); 德文版本 EN 12164:1998 + A1:2000 Copper and copper alloys - Rod for free machining purposes (includes amendment A1:2000); German version EN 12164:1998 + A1:2000
DIN EN 12165-1998 铜和铜合金.可锻加工和不可锻加工的锻坏 Copper and copper alloys - Wrought and unwrought forging stock; German version EN 12165:1998
DIN EN 12166-1998 铜和铜合金.普通线材 Copper and copper alloys - Wire for general purposes; German version EN 12166:1998
DIN EN 12167-1998 铜和铜合金.一般用途的型材和长方形棒材; 德文版本 EN 12167:1998 Copper and copper alloys - Profiles and rectangular bars for general purposes; German version EN 12167:1998
DIN EN 12168-2000 铜和铜合金.高速切削用空心棒材(包括修改件A1:2000); 德文版本 EN 12168:1998 + A1:2000 Copper and copper alloys - Hollow rod for free machining purposes (includes amendment A1:2000); German version EN 12168:1998 + A1:2000
DIN EN 12206-1-2004 色漆和清漆.建筑用铝和铝合金涂层.第1部分:从涂料粉制备的涂层 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder; German version EN 12206-1:2004
DIN EN 12258-1-1998 铝和铝合金.术语和定义.第1部分:一般术语.三种语言的版本 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN 12258-1:1998
DIN EN 12258-2-2005 铝和铝合金.术语和定义.第2部分:化学分析 Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis; Trilingual version EN 12258-2:2004
DIN EN 12258-3-2003 铝和铝合金.术语和定义.第3部分:废料 Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-3:2003
DIN EN 12258-4-2005 铝和铝合金.术语和定义.第4部分:铝工业的残留物 Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry; Trilingual version EN 12258-4:2004
DIN EN 12288-2003 工业阀门.铜合金闸阀 Industrial valves - Copper alloy gate valves; German version EN 12288:2003
DIN EN 12373-1-2001 铝及铝合金.阳极氧化.第1部分:装饰和保护用阳极氧化覆层的规定方法 Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; German version EN 12373-1:2001
DIN EN 12373-10-1999 铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨性能 Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998
DIN EN 12373-11-2000 铝及铝合金.阳极化处理.第11部分:20 、45、60或85度角阳极氧化层的镜面反射系数和镜面光泽度测量 Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; German version EN 12373-11:2000
DIN EN 12373-12-2000 铝及铝合金.阳极化处理.第12部分:用积算球光度表测量铝表面的反射特性 Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000
DIN EN 12373-13-2000 铝及铝合金.阳极化处理.第13部分:使用测角光度计或滤光测角光度计测量铝表面的反射特性 Aluminium and aluminium alloys - Anodizing - Part 13: Measurement for reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; German version EN 12373-13:2000
DIN EN 12373-14-2000 铝及铝合金.阳极化处理.第14部分:阳极氧化覆层图像清晰度的目视测定.图表比例尺法 Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings; Chart scale method; German version EN 12373-14:2000
DIN EN 12373-15-2000 铝及铝合金.阳极化处理.第15部分:阳极氧化层耐龟裂变形的评定 Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; German version EN 12373-15:2000
DIN EN 12373-16-2001 铝及铝合金.阳极氧化.第16部分:阳极氧化薄层连续性检查.硫酸铜试验 Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; German version EN 12373-16:2001
DIN EN 12373-17-2001 铝及铝合金.阳极氧化.第17部分:电介质击穿潜能测定 Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential; German version EN 12373-17:2001
DIN EN 12373-18-2001 铝及铝合金.阳极氧化.第18部分:斑蚀评定等级系统.图表法 Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; German version EN 12373-18:2001
DIN EN 12373-19-2001 铝及铝合金.阳极氧化.第19部分:斑蚀评定等级系统.格栅法 Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; German version EN 12373-19:2001
DIN EN 12373-2-1999 铝和铝合金.阳极处理.第2部分:阳极处理氧化涂层单位面积质量(与面积相关的质量)的测定.重力法 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass par unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998
DIN EN 12373-3-1999 铝和铝合金.阳极处理.第3部分:阳极的氧化涂层厚度的测定.用裂隙梁显微镜进行无损测量 Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings; non-destructive measurement by split-beam-microscope; German version EN 12373-3:1998
DIN EN 12373-4-1999 铝和铝合金.阳极处理.第4部分:采用在酸处理之前用着色点滴试验密封后阳极化氧化涂层的吸收力损失量的估计 Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998
DIN EN 12373-5-1999 铝和铝合金.阳极处理.第5部分:用测量公差方法对密封的阳极处理氧化涂层进行质量评定 Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
DIN EN 12373-6-1999 铝和铝合金.阳极处理.第6部分:在预先未进行酸处理情况下涂层在铬酸/磷酸溶液中浸渍以后通过测定质量损耗对 Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 12373-6:1998
DIN EN 12373-7-2002 铝及铝合金.阳极氧化.第7部分:通过磷酸和铬酸溶液浸渍酸处理后测量质量损失评估密封阳极氧化涂层的质量; 德 Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373-7:2002
DIN EN 12373-8-1999 铝和铝合金.阳极处理.第8部分:着色阳极氧化处理氧化涂层的耐紫外线和热影响比较牢度的测定 Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings; German version EN 12373-8:1998
DIN EN 12373-9-1999 铝和铝合金.阳极化处理.第9部分:用砂轮磨损试验测量阳极处理氧化涂层的耐磨损性和磨损指数 Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998
DIN EN 12384-1999 铜和铜合金.带材弹簧弯曲极限的测定 Copper and copper alloys - Determination of spring bending limit on strip; German version EN 12384:1999
DIN EN 12392-2000 铝和铝合金.锻造产品.压力设备生产装备特殊要求 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000
DIN EN 12402-1999 铅和铅合金.分析取样方法 Lead and lead alloys - Methods of sampling for analysis; German version EN 12402:1999
DIN EN 12420-1999 铜和铜合金.锻件 Copper and copper alloys - Forgings; German version EN 12420:1999
DIN EN 12421-1998 镁和镁合金.纯镁 Magnesium and magnesium alloys - Unalloyed magnesium; German version EN 12421:1998
DIN EN 12438-1998 镁和镁合金.铸件阳极用镁合金 Magnesium and magnesium alloys - Magnesium alloys for cast anodes; German version EN 12538:1998
DIN EN 12441-1-2004 锌及锌合金.化学分析.第1部分:锌合金中铝的测定.滴定法 Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method; German version EN 12441-1:2001 + A1:2004
DIN EN 12441-10-2005 锌及锌合金.化学分析.第10部分:锌合金中铬和钛的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method; German version EN 12441-10:2004
DIN EN 12441-11-2006 锌及锌合金.化学分析.第11部分:锌合金中硅的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method; English version of DIN EN 12441-11:2006-10
DIN EN 12441-2-2005 锌及锌合金.化学分析.第2部分:锌合金中镁的测定.火焰原子吸收光谱测定法 Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method; German version EN 12441-2:2001 + A1:2003 + A2:2004
DIN EN 12441-3-2002 锌及锌合金.化学分析.第3部分:铅、镉、铜含量测定.火焰原子吸收光谱法 Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method; German version EN 12441-3:2001
DIN EN 12441-4-2003 锌及锌合金.化学分析.第4部分:锌合金中铁的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method; German version EN 12441-4:2003
DIN EN 12441-5-2003 锌及锌合金.化学分析.第5部分:粗锌中铁的测定.分光光度法 Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method; German version EN 12441-5:2003
DIN EN 12441-6-2003 锌及锌合金.化学分析.第6部分:铝和铁的测定.火焰原子吸收光谱法 Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method; German version EN 12441-6:2003
DIN EN 12441-7-2005 锌及锌合金.化学分析.第7部分:锡的测定.萃取后的火焰原子吸收光谱法 Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction; German version EN 12441-7:2004
DIN EN 12441-8-2005 锌及锌合金.化学分析.第8部分:二级锌中锡的测定.火焰原子吸收光谱法 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method; German version EN 12441-8:2004
DIN EN 12441-9-2005 锌及锌合金.化学分析.第9部分:锌合金中镍的测定.火焰原子吸收光谱法 Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method; German version EN 12441-9:2004
DIN EN 12449-1999 铜和铜合金.通用无缝圆管; 德文版本 EN 12449:1999 Copper and copper alloys - Seamless, round tubes for general purposes; German version EN 12449:1999
DIN EN 12450-1999 铜和铜合金.铜制无缝圆型毛细管 Copper and copper alloys - Seamless, round copper capillary tubes; German version EN 12450:1999
DIN EN 12451-1999 铜和铜合金.热交换器用无缝圆管; 德文版本 EN 12451:1999 Copper and copper alloys - Seamless, round tubes for heat exchangers; German version EN 12451:1999
DIN EN 12452-1999 铜和铜合金.热交换器用轧制精制无缝管 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers; German version EN 12452:1999
DIN EN 12482-1-1998 铝和铝合金.一般用途的粗轧带材.第1部分:热轧粗轧带材的规范 Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock; German version EN 12482-1:1998
DIN EN 12482-2-1998 铝和铝合金.通用粗轧带材.第2部分:重轧铝胚料的规范 Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock; German version EN 12482-2:1998
DIN EN 12487-2007 金属的腐蚀防护.铝和铝合金上经清洗和未清洗的铬酸盐转化涂层 Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; German version EN 12487:2007
DIN EN 12501-2-2003 金属材料防腐措施.土壤中腐蚀似然性.第2部分:低合金和非合金黑色金属材料 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003
DIN EN 12502-2-2005 金属防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第2部分:铜和铜合金的影响因素 Protection of metallic against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys; German version EN 12502-2:2004
DIN EN 12502-5-2005 金属材料防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第5部分:铸铁、非合金和低合金钢的影响因素 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels; German version EN 12502-5:2004
DIN EN 12508-2000 金属和合金的腐蚀防护.金属和其它非有机涂层的表面处理.词汇 Corrosion protection of metals and alloys - Surface treatment, metallic and other non-organic coatings - Vocabulary; German version EN 12508:2000
DIN EN 12517-1-2006 焊接连接的无损试验.第1部分:通过X光透视评定钢、镍、钛及其合金焊接接头.允许极限 Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels; English version of DIN EN 12517-1:2006-06
DIN EN 12536-2000 焊接耗材.非合金钢和抗蠕变钢的气体焊接用焊条.分类 Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification; German version EN 12536:2000
DIN EN 1254-1-1998 铜和铜合金.管配件.第1部分:紧隙钎焊和紧隙铜焊用的焊接到铜管上的带端部管配件 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes; German version EN 1254-1:1998
DIN EN 1254-2-1998 铜和铜合金.管配件.第2部分:与铜管一起用的带压紧连接端部的管配件 Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes; German version EN 1254-2:1998
DIN EN 1254-3-1998 铜和铜合金.管配件.第3部分:与塑料管一起用的带压紧连接端部的管配件 Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes; German version EN 1254-3:1998
DIN EN 1254-4-1998 铜和铜合金.管配件.第4部分:把其它连接端头和毛细管或压力接头相连接的管件 Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998
DIN EN 1254-5-1998 铜和铜合金.管配件.第5部分:紧隙铜焊用的焊接到铜管上的带短端部管配件 Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes; German version EN 1254-5:1998
DIN EN 12548-1999 铅及铅合金.电缆护套和套筒用铅合金锭 Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves; German version EN 12548:1999
DIN EN 12588-2007 铅和铅合金.建筑用轧制铅薄板 Lead and lead alloys - Rolled lead sheet for building purposes; English version of DIN EN 12588:2007-03
DIN EN 12659-1999 铅及铅合金.铅 Lead and lead alloys - Lead; German version EN 12659:1999
DIN EN 12735-1-2005 铜和铜合金.空气调节和制冷用无缝圆形铜管.第1部分:管道系统用管 Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems; German version EN 12735-1:2001 + A1:2005
DIN EN 12735-2-2005 铜和铜合金.空气调节和制冷用无缝圆形铜管.第2部分:设备用管 Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment; German version EN 12735-2:2001 + A1:2005
DIN EN 12844-1999 锌和锌合金.铸件.规范 Zinc and zinc alloys - Castings - Specifications; German version EN 12844:1998
DIN EN 12861-1999 铜与铜合金.废料 Copper and copper alloys - Scrap; German version EN 12861:1999
DIN EN 12862-2000 可运输气瓶.可再充气可运输的焊接铝合金气瓶的设计和制造规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders; German version EN 12862:2000
DIN EN 12893-2000 铜和铜合金.螺旋延伸率数值的测定 Copper and copper alloys - Determination of spiral elongation number; German version EN 12893:2000
DIN EN 12938-2000 锡基合金的分析方法.原子光谱仪法测定合金杂质含量 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000
DIN EN 1301-1-1997 铝和铝合金.拉拔丝材.第1部分:检验和交货技术条件 Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery; German version EN 1301-1:1997
DIN EN 1301-2-1997 铝和铝合金.拉拔丝材.第2部分:机械性能 Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties; German version EN 1301-2:1997
DIN EN 1301-3-1997 铝和铝合金.拉拔丝材.第3部分:尺寸公差 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; German version EN 1301-3:1997
DIN EN 13086-2000 铅及铅合金.氧化铅 Lead and lead alloys - Lead oxides; German version EN 13086:2000
DIN EN 13147-2001 铜和铜合金.带材镗孔区残留应力测定 Copper and copper alloys - Determination of residual stresses in the border areas of slit strip; German version EN 13147:2001
DIN EN 13148-2002 铜及铜合金.热浸镀锡带 Copper and copper alloys - Hot-dip tinned strip; German version EN 13148:2001
DIN EN 13195-1-2002 铝和铝合金.船舶应用(海运和近海造船)精制产品和铸造产品.第1部分:规范; 德文版本 EN 13195-1:2002 Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications; German version EN 13195-1:2002
DIN EN 13283-2003 锌和锌合金.二次利用的锌 Zinc and zinc alloys - Secondary zinc; German version EN 13283:2002
DIN EN 13347-2003 铜和铜合金.焊接和铜焊用铜棒和铜丝 Copper and copper alloys - Rod and wire for welding and braze welding; German version EN 13347:2002
DIN EN 13348-2005 铜和铜合金.医用气体或真空用无缝圆形铜管 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum; German version EN 13348:2001 + A1:2005
DIN EN 13349-2002 铜和铜合金.坚固体外封预绝缘铜管 Copper and copper alloys - Pre-insulated copper tubes with solid covering; German version EN 13349:2002
DIN EN 13480-8-2007 金属工业管道系统.第8部分:铝和铝合金管道系统的额外要求 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping; German version EN 13480-8:2007
DIN EN 13599-2002 铜和铜合金.电力用铜板、薄板和带材; 德文版本 EN 13599:2002 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes; German version EN 13599:2002
DIN EN 13600-2002 铜和铜合金.电力用无缝铜管; 德文版本 EN 13600:2002 Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2002
DIN EN 13601-2002 铜和铜合金.一般电气设备用铜杆材、棒材和线材; 德文版本 EN 13601:2002 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes; German version EN 13601:2002
DIN EN 13602-2002 铜和铜合金.电导体生产用拉丝圆形铜导线; 德文版本 EN 13602:2002 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors; German version EN 13602:2002
DIN EN 13603-2002 铜和铜合金.电力用拉丝圆形铜导线保护锡涂层评估的试验方法; 德文版本 EN 13603:2002 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2002
DIN EN 13604-2002 铜和铜合金.电子管、半导体器件和真空设施用高电导率铜制品 Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications; German version EN 13604:2002
DIN EN 13605-2002 铜和铜合金.电气设备用铜型材和型面丝材; 德文版本 EN 13605:2002 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes; German version EN 13605:2002
DIN EN 13828-2003 建筑物用阀.建筑物内饮用水供应用手动铜合金和不锈钢球阀.试验和要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003
DIN EN 1386-2007 铝和铝合金.踏脚板.规范 Aluminium and aluminium alloys - Tread plate - Specifications; German version EN 1386:2007
DIN EN 13920-1-2003 铝和铝合金.废料.第1部分:一般要求、取样和试验 Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests; German version EN 13920-1:2003
DIN EN 13920-10-2003 铝和铝合金.废料.第10部分:使用过的铝制饮料罐 Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans; German version EN 13920-10:2003
DIN EN 13920-11-2003 铝和铝合金.废料.第11部分:铝铜散热器废料 Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators; German version EN 13920-11:2003
DIN EN 13920-12-2003 铝和铝合金.废料.第12部分:单一合金车床切屑 Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy; German version EN 13920-12:2003
DIN EN 13920-13-2003 铝和铝合金.废料.第13部分:两种或多种合金混合车床切屑 Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys; German version EN 13920-13:2003
DIN EN 13920-14-2003 铝和铝合金.废料.第14部分:旧的铝制包装件废料 Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings; German version EN 13920-14:2003
DIN EN 13920-15-2003 铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料 Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings; German version EN 13920-15:2003
DIN EN 13920-16-2003 铝和铝合金.废料.第16部分:浮渣、碎屑、小金属棒和金属碎粒废料 Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics; German version EN 13920-16:2003
DIN EN 13920-2-2003 铝和铝合金.废料.第2部分:非合金铝废料 Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap; German version EN 13920-2:2003
DIN EN 13920-3-2003 铝和铝合金.废料.第3部分:导线和电缆废料 Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap; German version EN 13920-3:2003
DIN EN 13920-4-2003 铝和铝合金.废料.第4部分:单一锻造合金废料 Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy; German version EN 13920-4:2003
DIN EN 13920-5-2003 铝和铝合金.废料.第5部分:同批两种或多种锻造合金废料 Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series; German version EN 13920-5:2003
DIN EN 13920-6-2003 铝和铝合金.废料.第6部分:两种或多种锻造合金废料 Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys; German version EN 13920-6:2003
DIN EN 13920-7-2003 铝和铝合金.废料.第7部分:铸件废料 Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings; German version EN 13920-7:2003
DIN EN 13920-8-2003 铝和铝合金.废料.第8部分:铝分离用有色金属碎料 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes; German version EN 13920-8:2003
DIN EN 13920-9-2003 铝和铝合金.废料.第9部分:有色金属碎料经铝分离处理后的剩余废料 Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials; German version EN 13920-9:2003
DIN EN 13957-2003 铝及铝合金.通用挤制圆盘管.规范 Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification; German version EN 13957:2003
DIN EN 13958-2003 铝及铝合金.通用冷拉制圆盘管.规范 Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification; German version EN 13958:2003
DIN EN 1396-2007 铝和铝合金.普通绕涂板材和带材.规范 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications; German version EN 1396:2007
DIN EN 13981-1-2003 铝及铝合金.结构性铁路设施用制品.检验和交换用技术条件.第1部分:挤制产品 Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products; German version EN 13981-1:2003
DIN EN 13981-2-2004 铝及铝合金.结构性铁路设施用制品的检验和交换用技术条件.第2部分:板和薄板 Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets; German version EN 13981-2:2004
DIN EN 13981-4-2007 铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第4部分:锻制 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings; English version of DIN EN 13981-4:2007-02
DIN EN 14057-2003 铅和铅合金.废料.术语和定义 Lead and lead alloys - Scrap - Terms and definitions; German version EN 14057:2003
DIN EN 1412-1995 铜和铜合金.欧洲编号码制度 Copper and copper alloys - European numbering system; German version EN 1412:1995
DIN EN 14121-2003 铝和铝合金.电工用铝薄板材、带材和板材 Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications; German version EN 14121:2003
DIN EN 14242-2004 铝和铝合金.化学分析.电感耦合等离子体光学发射光谱分析 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis; German version EN 14242:2004
DIN EN 14286-2007 铝和铝合金.储存和运输危险货物的罐用可焊接卷状产品 Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods; German version EN 14286:2007
DIN EN 14287-2004 铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components; German version EN 14287:2004
DIN EN 14290-2004 锌和锌合金.二次原料 Zinc and zinc alloys - Secondary raw material; German version EN 14290:2004
DIN EN 14361-2005 铝和铝合金.化学分析.从金属熔体中取样 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts; German version EN 14361:2004
DIN EN 14436-2004 铜和铜合金.电解锡条 Copper and copper alloys - Electrolytically tinned strip; German version EN 14436:2004
DIN EN 14532-1-2005 焊接消耗品.试验方法和质量要求.第1部分:钢、镍和镍合金用消耗品的基本方法和合格评定 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys; German version EN 14532-1:2004
DIN EN 14532-2-2005 焊接消耗品.试验方法和质量要求.第2部分:钢、镍和镍合金用消耗品的补充方法和合格评定 Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys; German version EN 14532-2:2004
DIN EN 14532-3-2005 焊接消耗品.试验方法和质量要求.第3部分:铝合金焊接用焊丝电极、焊丝和焊棒的合格评定 Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys; German version EN 14532-3:2004
DIN EN 14640-2005 焊接消耗物.铜和铜合金熔焊用实心焊丝和焊棒.分类 Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification; German version EN 14640:2005
DIN EN 14726-2005 铝和铝合金.化学分析.闪光光发射光谱分析指南.德文版本 EN 14726-2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis; German version EN 14726:2005
DIN EN 14935-2006 铜和铜合金.测定纯铜杂质.ET-AAS法 Copper and copper alloys - Determination of impurities in pure copper - ET AAS method English version of DIN EN 14935:2006-09
DIN EN 14936-1-2006 铜和铜合金.测定铝含量.第1部分:滴定法 Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method English version of DIN EN 14936-1:2006-09
DIN EN 14936-2-2006 铜和铜合金.测定铝含量.第2部分:FAAS法 Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method English version of DIN EN 14936-2:2006-09
DIN EN 14937-1-2006 铜和铜合金.测定锑含量.第1部分:分光光度测量法 Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method English version of DIN EN 14937-1:2006-09
DIN EN 14937-2-2006 铜和铜合金.测定锑含量.第2部分:FAAS法 Copper and copper alloys - Determination of antimony content - Part 2: FAAS method English version of DIN EN 14937-2:2006-09
DIN EN 14939-2006 铜和铜合金.测定铍含量.FAAS法 Copper and copper alloys - Determination of beryllium content - FAAS method English version of DIN EN 14939:2006-09
DIN EN 14940-2-2006 铜和铜合金.测定铬含量.第2部分:FAAS法 Copper and copper alloys - Determination of chromium content - Part 2: FAAS method English version of DIN EN 14940-2:2006-09
DIN EN 14941-2006 铜和铜合金.测定钴含量.FAAS法 Copper and copper alloys - Determination of cobalt content - FAAS method English version of DIN EN 14941:2006-09
DIN EN 14942-2-2006 铜和铜合金.测定砷含量.第2部分:FAAS法 Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method English version of DIN EN 14942-2:2006-09
DIN EN 14945-2006 耐火制品和材料.使用前后铬合金耐火材料中铬(VI)的光谱测定.德文版本EN 14945-2005 Refractory products and materials - Spectrometric determination of chromium(VI) in chrome bearing refractories, before and after use; German version EN 14945:2005
DIN EN 14977-2006 铜和铜合金.抗拉应力的测定.5%氨熏试验法 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test English version of DIN EN 14977:2006-09
DIN EN 15024-2-2007 铜和铜合金.锌含量的测定.第2部分:火焰原子吸收光谱法(FAAS) Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometry method (FAAS); English version of DIN EN 15024-2:2007-01
DIN EN 1503-4-2003 阀门.阀体、阀盖和阀套材料.第3部分:欧洲标准规定的铜合金 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards; German version EN 1503-4:2002
DIN EN 15063-1-2007 铜和铜合金.用波长色散X-射线荧光光谱法(XRF)测定主要成分和杂质.第1部分:常规方法的指导方针 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method; English version of DIN EN 15063-1:2007-01
DIN EN 15063-2-2007 铜和铜合金.用波长色散X-射线荧光光谱法(XRF)测定主要成分和杂质.第2部分:常规方法 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method; English version of DIN EN 15063-2:2007-01
DIN EN 15079-2007 铜和铜合金.火花源发射光谱测定法(S-OES)分析 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES); German version EN 15079:2007
DIN EN 15088-2006 铝和铝合金.施工作业用结构产品.检验和交付技术条件.德文版本EN 15088-2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005
DIN EN 15190-2007 结构胶粘剂.评估粘合金属结构的长期坚固度用试验方法 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures; German version EN 15190:2007
DIN EN 1559-4-1999 铸造.交货技术条件.第4部分:铝合金铸件的附加要求 Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings; German version EN 1559-4:1999
DIN EN 1559-5-1998 铸造.交货技术条件.第5部分:镁合金铸件的附加要求 Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings; German version EN 1559-5:1997
DIN EN 1559-6-1999 铸造.交货技术条件.第6部分:锌合金铸件的附加要求 Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings; German version EN 1559-6:1998
DIN EN 1592-1-1997 铝和铝合金.HF缝焊管.第1部分:检验和交货技术条件 Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery; German version EN 1592-1:1997
DIN EN 1592-2-1997 铝和铝合金.HF缝焊管.第2部分:机械性能 Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties; German version EN 1592-2:1997
DIN EN 1592-3-1997 铝和铝合金.HF缝焊管.第3部分:圆管尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes; German version EN 1592-3:1997
DIN EN 1592-4-1997 铝和铝合金.HF缝焊管.第4部分:正方形、长方形和成形管的尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes; German version EN 1592-4:1997
DIN EN 1597-1-1997 焊料.试验方法.第1部分:钢、镍和镍合金中全焊接金属试样的试件 Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys; German version EN 1597-1:1997
DIN EN 1652-1998 铜和铜合金.一般用途的板材、薄板、带材和圆材; 德文版本 EN 1652:1997 Copper and copper alloys - Plate, sheet, strip and circles for general purposes; German version EN 1652:1997
DIN EN 1653-2000 铜和铜合金.锅炉、压力容器和热水存储设备用板材、薄板材和环材(包括修改件A1-2000) Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes amendment A1:2000); German version EN 1653:1997 + A1:2000
DIN EN 1654-1998 铜和铜合金.弹簧和连接器用带材 Copper and copper alloys - Strip for springs and connectors; German version EN 1654:1997
DIN EN 1655-1997 铜和铜合金.符合性公示 Copper and copper alloys - Declarations of conformity; German version EN 1655:1997
DIN EN 1668-1997 焊接助剂.合金钢和细晶粒钢的钨保护气体焊接用钢棒、钢丝和熔焊金属.分类 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification; German version EN 1668:1997
DIN EN 1669-1997 铝和铝合金.试验方法.薄板和带材的端部花边试验 Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip; German version EN 1669:1996
DIN EN 1676-1997 铝和铝合金.回炼用合金铝锭.规范 Aluminium and aluminium alloys - Alloyed aluminium ingots for remelting - Specifications; German version EN 1676:1996
DIN EN 1706-1998 铝和铝合金.铸件.化学成份和机械性能 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties; German version EN 1706:1997
DIN EN 1715-1-1997 铝和铝合金.拉拔坯料.第1部分:检验和交货的一般要求和技术条件 Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery; German version EN 1715-1:1997
DIN EN 1715-2-1997 铝和铝合金.拉拔坯料.第2部分:电器应用的特殊要求 Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications; German version EN 1715-2:1997
DIN EN 1715-3-1997 铝和铝合金.拉制坯料.第3部分:机械使用的特殊要求(不包括焊接) Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding); German version EN 1715-3:1997
DIN EN 1715-4-1997 铝和铝合金.拉拔坯料.第4部分:焊接特殊要求 Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications; German version EN 1715-4:1997
DIN EN 1753-1997 镁和镁合金.镁合金锭和铸件 Magnesium and magnesium alloys - Magnesium alloy ingots and castings; German version EN 1753:1997
DIN EN 1754-1997 镁和镁合金.镁和镁合金阳极、锭坯和铸件.命名制度 Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system; German version EN 1754:1997
DIN EN 1758-1998 铜和铜合金.引线框架用带材 Copper and copper alloys - Strip for lead frames; German version EN 1758:1997
DIN EN 1759-3-2004 法兰及其接头.等级标示的管、阀、配件和附件用圆形法兰.第3部分:铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
DIN EN 1759-4-2003 法兰及其接头.指定类别的管、阀、配件和附件用圆形法兰.第4部分:铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003
DIN EN 1774-1997 锌和锌合金.铸造用合金.铸块和液体 Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid; German version EN 1774:1997
DIN EN 1780-1-2003 铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第1部分:数字标识系统; 德文版本 EN 1780-1:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system; German version EN 1780-1:2002
DIN EN 1780-2-2003 铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第2部分:基于标识系统的化学符号; 德文版本 EN 1780-2:200 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system; German version EN 1780-2:2002
DIN EN 1780-3-2003 铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第3部分:化学成分的书面规则; 德文版本 EN 1780-3:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition; German version EN 1780-3:2002
DIN EN 1802-2002 可运输式储气瓶.无缝铝合金储气瓶的周期性检验和测试; 德文版本 EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders; German version EN 1802:2002
DIN EN 1904-2001 贵金属.与贵金属珠宝合金一起使用的焊料的细度 Precious metal - The finenesses of solders used with precious metal jewellery alloys; German version EN 1904:2000
DIN EN 1971-1998 铜和铜合金.管道的涡流检验 Copper and copper alloys - Eddy current test for tubes; German version EN 1971:1998
DIN EN 1975-2004 移动式气瓶.容量从0.5升至150升的铝和铝合金制可再填充便携式无缝气瓶的设计和构造规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; German version EN 1975:1999 + A1:2003
DIN EN 1976-1998 铜和铜合金.铸铜产品 Copper and copper alloys - Cast unwrought copper products; German version EN 1976:1998
DIN EN 1977-1998 铜和铜合金.铜拉拔胚料(盘条) Copper and copper alloys - Copper drawing stock (wire rod); German version EN 1977:1998
DIN EN 1978-1998 铜和铜合金.铜阴极 Copper and copper alloys - Copper cathodes; German version EN 1978:1998
DIN EN 1981-2003 铜及铜合金.母合金 Copper and copper alloys - Master alloys; German version EN 1981:2003
DIN EN 1982-1998 铜和铜合金.合金锭和铸件 Copper and copper alloys - Ingots and castings; German version EN 1982:1998
DIN EN 2003-009-2007 航空航天系列.试验方法.钛和钛合金.第009部分:表面污染物的测定 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination; German and English version EN 2003-009:2007
DIN EN 2003-010-2007 航空航天系列.钛和钛合金.试验方法.第010部分:氢含量测定用取样 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content; German and English version EN 2003-010:2007
DIN EN 2004-1-1993 航空航天系列.铝和铝合金制品的检验方法.第1部分：锻铝合金导电率的测定 Aerospace series; test methods for aluminium and aluminium alloy products; part 1: determination of electrical conductivity of wrought aluminium alloys; German version EN 2004-1:1993
DIN EN 2004-5-1993 航空和航天.铝和铝合金产品的检验方法.第5部分：电镀半成品时测定镀层厚度和铜渗析 Aerospace series; test methods for aluminium and aluminium alloy products; part 5: determination of cladding thickness and copper diffusion of clad semi-finished products; German version EN 2004-5:1993
DIN EN 2044-2003 航空航天系列.公差等级h11、直径4mm D 63mm的铝及铝合金拉制圆棒材. 尺寸 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001
DIN EN 2045-2003 航空航天系列.公差等级h11、厚度6mm a 50mm的铝及铝合金拉制方棒.尺寸 Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001
DIN EN 2046-2003 航空航天系列.公差等级h11.对边宽度7mm a 50mm的铝及铝合金拉制六角形棒材.尺寸 Aerospace series - Hexagonal bars, drawn, in aluminium and aluminium alloys, tolerance class h11, width across flats 7 mma50 mm - Dimensions; German and English version EN 2046:2001
DIN EN 2047-2002 航空航天系列.铝合金挤制粒状L形型材.尺寸 Aerospace series - Beaded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2047:2001
DIN EN 2048-2002 航空航天系列.铝合金L形挤压型材.尺寸 Aerospace series - Extruded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2048:2001
DIN EN 2049-2002 航空航天系列.铝合金挤制槽形型材.尺寸 Aerospace series - Extruded channel section, exruded in aluminium alloys - Dimensions; German and English version EN 2049:2001
DIN EN 2050-2002 航空航天系列.铝合金挤制T形型材.尺寸 Aerospace series - Extruded T-section, in aluminium alloys - Dimensions; German and English version EN 2050:2001
DIN EN 2066-2003 航空航天系列.铝合金挤压型材.通用公差 Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001
DIN EN 2070-1-1990 航空航天.精制铝和铝合金制品.技术规范.第1部分:一般要求; 德文版本 EN 2070-1:1989 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; german version EN 2070-1:1989
DIN EN 2070-1/A1-1993 航空航天系列.铝和铝合金锻造产品.技术规范.第1部分:一般要求 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; German version EN 2070-1/A1:1993; amendment 1
DIN EN 2070-2-1990 航空航天系列.铝和铝合金的精制产品.技术规范.第2部分:薄板、带材、型材和板材; 德文版本 EN 2070-2:1989 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 2: sheet, strip formed profiles and plate; german version EN 2070-2:1989
DIN EN 2070-3-1990 航空航天系列.铝和铝合金的精制产品.技术规范.第3部分:棒材和型材; 德文版本 EN 2070-3:1989 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 3: bar and section; german version EN 2070-3:1989
DIN EN 2070-4-1990 航空航天系列.铝和铝合金的精制产品.技术规范.第4部分:结构管材; 德文版本 EN 2070-4:1989 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 4: tube for structures; german version EN 2070-4:1989
DIN EN 2070-5-1990 航空航天系列.铝和铝合金的精制产品.技术规范.第5部分:受压管材; 德文版本 EN 2070-5:1989 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 5: tube used under pressure; german version EN 2070-5:1989
DIN EN 2070-6-1990 航空航天系列.铝和铝合金的精制产品.技术规范.第6部分:铆钉用丝材; 德文版本 EN 2070-6:1989 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 6: rivet wire; german version EN 2070-6:1989
DIN EN 2070-7-1990 航空航天系列.铝和铝合金的精制产品.技术规范.第7部分:精锻坯料; 德文版本 EN 2070-7:1989 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 7: wrought forging stock; german version EN 2070-7:1989
DIN EN 2071-2003 航空航天系列.厚度0.25mm a 6mm的铝及铝合金板材.尺寸 Aerospace series - Sheets in aluminium and aluminium alloys, thickness 0,25 mma6 mm - Dimensions; German and English version EN 2071:2001
DIN EN 2072-2007 航空航天系列.AL-P1050A-H14铝合金.薄板与带材.0.4≥a≥6mm Aerospace series - Aluminium AL-P1050A-H14 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2072:2005
DIN EN 2076-1-1990 航空航天.铝.镁合金铸件和铸锭.技术规范.第1部分:一般要求 Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; german version EN 2076-1:1989
DIN EN 2076-1/A1-1993 航空航天系列.铝和镁合金锭和铸件.技术规范.第1部分:一般要求 Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; German version EN 2076-1/A1:1993; amendment 1
DIN EN 2076-2-1990 航空航天.铝.镁合金铸件和铸锭.交货技术条件.第2部分:再熔炼用铸锭 Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 2: ingots for remelting; german version EN 2076-2:1989
DIN EN 2076-3-1990 航空航天.铝.镁合金铸件和铸锭.交货技术条件.第3部分:试制铸件和连铸件 Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 3: pre-production and production castings; german version EN 2076-3:1989
DIN EN 2082-1-1990 航空航天系列.铝合金锻坯和锻件.技术规范.第1部分:一般要求 Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; german version EN 2082-1:1989
DIN EN 2082-1/A1-1993 航空航天系列.铝合金锻坯和锻件.技术规范.第1部分:一般要求 Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; German version EN 2082-1/A1:1993; amendment 1
DIN EN 2082-2-1990 航空航天系列.铝合金锻造坯料和锻件.技术规范.第2部分:锻造坯料 Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 2: forging stock; german version EN 2082-2:1989
DIN EN 2082-3-1990 航空航天系列.铝合金锻造坯料和锻件.技术规范.第3部分:试生产和批生产锻件 Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 3: preproduction and production forgings; german version EN 2082-3:1989
DIN EN 2083-2001 航空航天系列.电缆用铜或铜合金导体.产品标准. Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard; German version EN 2083:2001
DIN EN 2084-2006 航空航天系列.一般用途的铜和铜合金导体单芯电缆.技术规范 Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification; German and English version EN 2084:2005
DIN EN 2085-2007 航空航天系列.AL-P2618A-T6型铝合金.自由锻件和模锻件.a≤150mm Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a 150 mm; German and English version EN 2085:2004
DIN EN 2086-2006 航空航天系列.铝合金AL-P2618A-T851.手锻和模锻件.a ≤150 mm Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2086:2004
DIN EN 2087-2006 航空航天系列.铝合金 AL-P2014A .T6 或T62.覆层铝合金板材及带材.0.4mm≤a≤6mm.德文和英文版本EN 2087-200 Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2087:2005
DIN EN 2088-2007 航空航天系列.AL-P2014A-T4或T42型铝合金铠装薄材和带材.0.4mm≥a≥6mm Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2088:2005
DIN EN 2089-2007 航空航天系列.AL-P2014A-T6或T62型铝合金.薄板材和带材.0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2089:2005
DIN EN 2090-2006 航空航天系列.铝合金AL-P2024-T3.覆层板材及带材.0.3mm≥a ≥6mm Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm a 6 mm; German and English version EN 2090:2005
DIN EN 2092-2006 航空航天系列.AL-P7075-T6或T62铝合金.层覆薄板及带材.0.4mm<=a<=6mm Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2092:2005
DIN EN 2093-1993 航空航天.AL-P709-T74铝合金.20mm≤a≤150mm.手制锻件. Aerospace series; aluminium alloy AL-P7009-T74; hand forgings 20 mm a 150 mm; German version EN 2093:1992
DIN EN 2094-1993 航空航天.AL-P7009-T74铝合金.3mm≤a≤150mm模锻件 Aerospace series; aluminium alloy AL-P7009-T74; die forgings 3 mm a 150 mm; German version EN 2094:1992
DIN EN 2100-1992 航空航天.AL-P2014A-T4511铝合金.a或D≤200mm 的挤压棒材和型材 Aerospace series; aluminium alloy AL-P2014A-T4511; extruded bars and sections a or D 200 mm; german version EN 2100:1992
DIN EN 2101-1991 航空航天.铝和锻铝合金的铬酸阳极氧化 Aerospace series; chromic acid anodizing of aluminium and wrought aluminium alloys; german version EN 2101:1991
DIN EN 2103-1-1991 航空航天系列.钢、镍基以及钴基合金重熔坯料和铸件.技术规范.第1部分:一般要求 Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 1: general requirements; german version EN 2103-1:1991
DIN EN 2103-2-1991 航空航天系列.钢、镍基以及钴基合金重熔坯料和铸件.技术规范.第2部分:重熔坯料 Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 2: remelting stock; german version EN 2103-2:1991
DIN EN 2103-3-1991 航空航天系列.钢、镍基以及钴基合金重熔坯料和铸件.技术规范.第3部分:试制铸件和批生产铸件 Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 3: pre-production and production castings; german version EN 2103-3:1991
DIN EN 2122-1996 航空航天系列.阳极处理和铬酸钝化铝合金平垫圈 Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated; German version EN 2122:1996
DIN EN 2126-1993 航空航天.AL-P7075-T651铝合金.6mm∠a≤800mm中厚板材 Aerospace series; aluminium alloy AL-P7075-T651; plate 6 mm a 80 mm; German version EN 2126:1992
DIN EN 2127-1993 航空航天.AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材 Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections a or D 100 mm; German version EN 2127:1992
DIN EN 2128-1993 航空航天.AL-P7075-T73511铝合金.6mm≤a或D≤75mm 拉制棒材 Aerospace series; aluminium alloy AL-P7075-T73511; drawn bars 6 mm a or D 75 mm; German version EN 2128:1992
DIN EN 2131-2003 航空航天系列.厚度6mm a 160mm的铝合金板.尺寸 Aerospace series - Plates in aluminium alloys, thickness 6 mma160 mm - Dimensions; German and English version EN 2131:2001
DIN EN 2133-1998 航空系列航天.抗拉强度≤1450 MPa的镀镉钢、铜、铜合金以及镍合金 Aerospace series - Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys; German version EN 2133:1997
DIN EN 2134-2003 航空航天系列.直径10mm D 220mm的铝及铝合金挤压圆棒材.尺寸 Aerospace series - Round bars, extruded in aluminium and aluminium alloys, diameter 10 mmD220 mm - Dimensions; German and English version EN 2134:2001
DIN EN 2144-1994 航空航天系列.英制系列铝合金 2117 通用头实心铆钉; 德文版本 EN 2144:1994 Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series; German version EN 2144:1994
DIN EN 2145-1994 航空航天系列.英制系列阳极氧化或铬酸钝化铝合金 2117 通用头全铆钉; 德文版本 EN 2145:1994 Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series; German version EN 2145:1994
DIN EN 2146-1993 航空航天系列.英寸系列2017A铝合金通用头实心铆钉 Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992
DIN EN 2148-1993 航空航天系列.英寸系列5056A铝合金通用头实心铆钉 Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992
DIN EN 2149-1996 航空航天系列.英制系列5056A铝合金阳极氧化或铬酸钝化普通头实心铆钉 Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodised or chromated, inch based series; German version EN 2149:1996
DIN EN 2236-1992 航空航天系列.合金钢的紧公差杆带头的抗剪销钉.技术规范 Aerospace series; pins, shear, headed, close tolerance shank, alloy steel; technical specification; german version EN 2236:1992
DIN EN 2256-2006 航空航天系列.铝合金AL-P2618A-T852.手锻和模锻件.a ≤150 mm Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2256:2004
DIN EN 2257-1997 航空和航天.铝和铝合金制结构圆管.直径6mm=<100mm,壁厚1mm=<6mm.尺寸 Aerospace series - Circular tubes for structures in aluminium and aluminium alloys; diameter 6 mm D 100 mm, thickness 1 mm a 6 mm; dimensions; German version EN 2257:1997
DIN EN 2258-1997 航空和航天.铝和铝合金制圆形管道.直径3.2mm=<100mm,壁厚0.6mm=<2.5mm.尺寸 Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm D 100 mm, thickness 0,6 mm a 2,5 mm; dimensions; German version EN 2258:1997
DIN EN 2264-1996 航空航天系列.合金钢镀镉MoS2润滑带各种深度圆柱形沉头孔双面法兰活动式自锁铆接螺母.等级:900MPa(室温)/23 Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996
DIN EN 2284-1991 航空航天.铝和锻铝合金的硫酸阳极氧化 Aerospace series; sulphuric acid anodizing of aluminium and wrougth aluminium alloys; german version EN 2284:1991
DIN EN 2285-1990 航空航天系列.带自润滑衬料的铝合金制普通衬套.尺寸和负载 Aerospace series; bushes plain, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2285:1989
DIN EN 2286-1990 航空航天系列.带自润滑衬料的铝合金制有法兰衬套.尺寸和负载 Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; German version EN 2286:1989
DIN EN 2289-1996 航空航天系列.飞行控制用铝合金制棒料.交货技术条件 Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification; German version EN 2289:1996
DIN EN 2290-1-1998 航空航天系列.可调节控制杆端部接头的铝合金飞行控制杆体.第1部分:尺寸和负载 Aerospace series - Rod bodies flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads; German version EN 2290-1:1998
DIN EN 2318-1993 航空航天.AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm 挤压棒材和型材 Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mm a or D 150 mm; German version EN 2318:1992
DIN EN 2326-1992 航空航天.AL-P6082-T6铝合金.a 或D≤200mm 的挤压棒材和型材 Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections a or D 200 mm; german version EN 2326:1992
DIN EN 2327-2007 航空航天系列.飞机控制杆用镀镉合金钢径向锯齿锁住垫圈.尺寸 Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated, for flight control rods - Dimensions; German and English version EN 2327:2006
DIN EN 2334-1997 航空航天系列.铝和铝合金铬硫酸酸洗 Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997
DIN EN 2338-2003 航空航天系列.钛和钛合金热轧薄板材.厚度6mm～8mm Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm; Dimensions; German and English version EN 2338:2001
DIN EN 2339-2003 航空航天系列.厚度0.2mm a 6mm的冷轧钛和钛合金薄板材.尺寸 Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mma6 mm - Dimensions; German and English version EN 2339:2001
DIN EN 2344-2003 航空航天系列.耐热合金机械加工圆棒材.直径10mm～180mm Aerospace series - Round bars, machined, in heat resisting alloys - Diameter 10 mm D 180 mm; Dimensions; German and English version EN 2344:2001
DIN EN 2365-1989 航空航天.铝合金铆钉套环 Aerospace; collars, aluminium alloy; german version EN 2365:1989
DIN EN 2381-1993 航空航天.AL-P7009-T7452铝合金.40mm≤a≤150mm自由锻件 Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mm a 150 mm; German version EN 2381:1992
DIN EN 2384-1992 航空航天.AL-P2014A-T6511铝合金.a或D≤150mm 的挤压棒材和型材 Aerospace series; aluminium alloy AL-P2014A-T6511; extruded bars and sections a or D 150 mm; german version EN 2384:1992
DIN EN 2385-1993 航空航天.AL-P7009-T74511铝合金.a或D≤12.5mm挤压棒材和型材 Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D 125 mm; German version EN 2385:1992
DIN EN 2395-2006 航空航天.AL-P2014A-T4或T42铝合金.薄板材和带材.0.4mm<=a<=6mm Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2395:2005
DIN EN 2413-1995 航空航天系列.镀镉合金钢短螺纹紧公差薄头六角肩形螺栓.等级:1100MPa(室温)/235℃; 德文版本 EN 2413:1995 Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995
DIN EN 24159-1990 锰铁和硅锰铁合金中锰含量的测定.电势滴定法 Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1st edition: 1978.12.15); german version EN 24159:1989
DIN EN 2422-2006 航空航天系列.铝合金AL-P2124-T351.板材.25mm Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm ＜ a ≤ 120 mm; German and English version EN 2422:2005
DIN EN 2437-2003 航空航天系列.铝及铝合金铬酸盐转化涂层(黄色) Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001
DIN EN 2486-2006 航天航空系列.AL-P2618A 型铝合金.锻坯件.德文和英文版本EN 2486-2005 Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005
DIN EN 2497-1989 航空航天.钛和钛合金的干喷砂处理 Aerospace series; dry abrasive blasting of titanium and titanium alloys; german version EN 2497:1989
DIN EN 2511-2006 航空航天系列.铝合金AL-P7075-T7351.板材.6mm Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm a 100 mm; German and English version EN 2511:2005
DIN EN 2516-1997 航空航天系列.耐蚀钢钝化和镍合金净化 Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys; German version EN 2516:1997
DIN EN 2536-1995 航空航天系列.铝合金的淬硬阳极氧化处理; 德文版本 EN 2536:1995 Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995
DIN EN 2545-1-1995 航空航天系列.钛和钛合金重熔毛坯和铸件.技术规范.第1部分:一般要求; 德文版本 EN 2545-1:1995 Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements; German version EN 2545-1:1995
DIN EN 2545-2-1995 航空航天系列.钛和钛合金的重熔料和铸件.技术规范.第2部分:重熔料 Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock; German version EN 2545-2:1995
DIN EN 2545-3-1995 航空航天系列.钛和钛合金重熔毛坯和铸件.技术规范.第3部分:预制铸件和生产铸件; 德文版本 EN 2545-3:1995 Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 3: Pre-productions and production castings; German version EN 2545-3:1995
DIN EN 2549-2007 航空航天系列.加 MoS<下标2> 润滑剂的阳极氧化钛合金短螺纹公称六角紧公差螺栓.等级:1100MPa(室温)/315℃ Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006
DIN EN 2551-1993 航空航天系列.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992
DIN EN 2552-1993 航空航天.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992
DIN EN 2553-1993 航空航天.英寸系列2017A铝合金拱顶100°普通沉头实心铆钉 Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992
DIN EN 2555-1993 航空航天.英寸系列5056A铝合金拱顶100°普通沉头实心铆钉 Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992
DIN EN 2556-1993 航空航天.英制系列的5056A铅合金制阳极化或镀铬的带拱顶100度普通沉头实心铆钉 Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992
DIN EN 2583-1997 航空航天系列.耐高温镍基合金(因科镍合金718)MJ螺纹螺钉.等级:1275MPa(室温)/650℃.交货技术条件 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997
DIN EN 2599-2002 航空航天系列.铝和铝合金带材.厚度a为0.25mm-3.2mm.尺寸 Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3,2 mm; Dimensions; German version EN 2599:2001
DIN EN 2609-1989 航空航天系列.铜锌合金制操纵钢索的旋转套筒.尺寸和负荷 Aerospace series; turnbarrels, control cable in copper-zinc alloys; dimensions and loads
DIN EN 2617-2003 航空航天系列.厚度6mm a 100mm的钛和钛合金板.尺寸 Aerospace series - Plates in titanium and titanium alloys, thickness 6 mma100 mm - Dimensions; German and English version EN 2617:2001
DIN EN 2622-2003 航空航天系列.直径为3.2mm D 100mm的耐热合金液压圆形管.尺寸 Aerospace series - Circular tubes, for fluids in heat resisting alloys, diameter 3,2 mmD100 mm - Dimensions; German and English version EN 2622:2001
DIN EN 2630-1994 航空航天系列.AL-P7009-T74511铝合金.带外围粗糙颗粒控制设备的挤压棒材和型材.a或D为125mm Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections; a or D 125 mm, with peripheral coarse grain control; German version EN 2630:1993
DIN EN 2632-2007 航空航天系列.铝合金AL-P7075-T73511.挤压棒材和型材.带周边粗晶粒控制的.a或D≤100mm Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 2632:2005
DIN EN 2633-1994 航空航天系列.铝合金AL-P2024-T3511;挤压棒材和截面：1,2 mm a或D 150 mm,周边粗 Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections; 1,2 mm a or D 150 mm, with peripheral coarse grain control; German version EN 2633:1993
DIN EN 2635-2006 航空航天系列.铝合金AL-P2014A.T6511.挤压棒材和型材.a/D≤200mm周边粗粒控制 Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D 200 mm with peripheral coarse grain control; German and English version EN 2635:2005
DIN EN 2636-1994 航空航天系列.AL-P6082-T6铝合金.带外围粗糙颗粒控制设备的挤压棒材和型材.a或D为200mm Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections; a or D 200 mm, with peripheral coarse grain control; German version EN 2636:1993
DIN EN 2647-2007 航空航天系列.镀隔合金钢加 MoS<下标2> 润滑剂的球形座自锁六角螺母.等级:900MPa(环境温度)/235℃ Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2647:2006
DIN EN 2648-1995 航空航天系列.镀隔合金钢凹面垫圈; 德文版本 EN 2648:1995 Aerospace series - Washers, concave, in alloy steel, cadmium plated; German version EN 2648:1995
DIN EN 2649-1995 航空航天系列.镀镉合金钢全螺纹带槽大柱头螺钉.等级:900MPa(室温下)/235°C; 德文版本 EN 2649:1995 Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995
DIN EN 2652-1997 航空航天系列.镀镉合金制螺纹接近顶部带槽的100度沉头螺丝.等级900MPa(室温)/235℃ Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997
DIN EN 2680-2007 航空和航天系列.米制系列MOS2润滑的钝化镀镉合金钢双耳自准、锁紧浮动地脚螺母.等级:900MPa/235℃ Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006
DIN EN 2681-2006 航空航天系列.铝合金AL-P7010-T74.手锻和模锻件.a ≤150 mm Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2681:2004
DIN EN 2684-2006 航空航天系列.铝合金AL-P2124-T351.板材.6mm Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm ＜ a ≤ 140 mm; German and English version EN 2684:2004
DIN EN 2687-2006 航空航天系列.铝合金AL-P7010-T7451.板材.6mm Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm ＜ a ≤ 160 mm; German and English version EN 2687:2004
DIN EN 2693-2006 航空航天系列.铝合金AL-P5086-H111.薄板和带材.0.3mm<=a<=6mm Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2693:2005
DIN EN 2694-2006 航空航天系列.铝合金AL-P6061-T6或T62.薄板材和带材.0.4mm<=a<=6mm Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2694:2005
DIN EN 2695-2006 航空航天系列.铝合金AL-P6081-T6.薄板和带材.0.3mm<=a<=6mm Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2695:2005
DIN EN 2696-2006 航空航天系列.铝合金AL-P7075-T6或T62.薄板材和带材.0.4mm≥a≥6mm Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2696:2005
DIN EN 2702-2006 航空航天系列.铝合金AL-P6061.T6或T62.拉制或挤压棒材和型材.a或D<=200mm Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D 200 mm; German and English version EN 2702:2005
DIN EN 2703-2006 航空航天系列.铝合金AL-P2024-T4或T42.覆层薄板和带材.0.3mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2703:2005
DIN EN 2731-2006 航空航天系列.镁合金钢 MG-C46001-T6.砂型铸造 Aerospace series - Magnesium alloy MG-C46001-T6 - Sand casting; German and English version EN 2731:2005
DIN EN 2732-2005 航空航天系列.镁合金MG-C46001-T6.冷型铸造 Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting; German and English version EN 2732:2005
DIN EN 27526-1992 镍.镍铁.镍合金.硫含量的测定.感应电炉燃烧后红外线吸收法(ISO 7526-1985) Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985); german version EN 27526:1991
DIN EN 27527-1992 镍.镍铁.镍合金.硫含量的测定.感应电炉燃烧后碘滴定分析法(ISO 7527-1985) Nickel, ferronickel and nickel alloys; determination of sulfur content; iodimetric titration method after induction furnace combustion (ISO 7527:1985); german version EN 27527:1991
DIN EN 2753-1996 航空航天系列.合金钢镀镉MoS(角注2)润滑带圆柱形沉头孔单面法兰自锁铆接螺母.等级 1100MPa(室温)/235℃ Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996
DIN EN 27787-3-1994 牙科学.牙科旋转器械.切割工具.第3部分:铣床硬质合金刀具 Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines (ISO 7787-3:1991); German version EN 27787-3:1993
DIN EN 2802-2005 航空航天系列.铝合金AL-P7475-T761.薄板和带材.0.6 mm a 6 mm Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm a 6 mm; German and English version EN 2802:2005
DIN EN 2803-2005 航空航天系列.铝合金AL-P7475-T761.覆层薄板和带材.1.0 mm a 6 mm Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 2803:2005
DIN EN 2808-1997 航空航天系列.钛和钛合金阳极氧化 Aerospace series - Anodizing of titanium and titanium alloys; German version EN 2808:1997
DIN EN 2858-2-1994 航空航天系列.钛和钛合金.锻坯和锻件.技术规范.第2部分:锻坯 Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 2: forging stock; German version EN 2858-2:1994
DIN EN 2859-1995 航空航天系列.镀镉合金钢短螺纹公称六角紧公差螺栓.等级:1100MPa(室温)/235℃; 德文版本 EN 2859:1995 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2859:1995
DIN EN 286-4-1994 装空气和氮气用的简单的不受燃烧加热的压力容器.第4部分:轨道车辆中空气制动设备和气动辅助装置用铝合金制 Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-4:1994
DIN EN 28654-1993 金合金的颜色.定义、颜色系列和名称符号 Colours of gold alloys; definition, range of colours and designation (ISO 8654:1987); german version EN 28654:1992
DIN EN 2870-1996 航空航天系列.钛合金阳极化MoS2润滑十二角紧配合螺丝.等级 1100MPa(室温)/315℃ Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996
DIN EN 2874-1996 航空航天系列.钝化耐高温镍基合金中长螺纹十二角紧配合螺丝.等级 1550MPa(室温)/315℃ Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996
DIN EN 2884-1996 航空航天系列.MoS2润滑阳极化钛合金短螺纹带翼型十字槽平头螺钉.等级:1100MPa(室温)/315℃ Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996
DIN EN 2885-1996 航空航天系列.镀镉合金钢短螺纹带翼型十字槽平头螺钉.等级:900MPa(室下)/235℃ Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996
DIN EN 2886-1996 航空航天系列.镀铬合金钢短螺纹带翼形十字槽的平头紧配合螺丝.等级:900MPa/235℃ Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 °C; German version EN 2886:1996
DIN EN 2889-2007 航空航天系列.镀镉合金钢短螺纹粗公差普通六角头米制螺钉.等级:900MPa(室温下)/235℃;德文和英文版本 EN 28 Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006
DIN EN 2897-1996 航空航天系列.镀铬合金钢短螺纹带翼形十字槽的平头紧配合螺丝.等级:1100MPa/235℃ Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 °C; German version EN 2897:1996
DIN EN 2912-1996 航空航天系列.铝合金阳极化或铬酸钝化的大外径平垫圈 Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated; German version EN 2912:1996
DIN EN 29202-1993 珠宝.贵重金属合金的钝度 Jewellery; fineness of precious metal alloys (ISO 9202:1991); german version EN 29202:1992
DIN EN 2927-1996 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温)/650℃ Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996
DIN EN 2928-1996 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)镀银长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温)/650 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996
DIN EN 2929-1996 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1210 Mpa(室温)/730℃ Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996
DIN EN 2930-1996 航空航天系列.耐高温镍基合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)镀银长螺纹细螺杆十二角螺丝钉.等级 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996
DIN EN 2933-1996 航空航天系列.高温镍基合金HI-P100HT(因康镍718)长螺纹细杆T字头螺栓.等级:1275 MPa(室温)/650℃ Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996
DIN EN 2934-1996 航空航天系列.高温镍基合金HI-P100HT(因康镍718)长螺纹,细杆镀银T字头螺栓.等级:1275 MPa(室温)/650℃ Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996
DIN EN 2935-1996 航空航天系列.高温镍基合金HI-P101HT(沃斯帕落伊合金)长螺纹细杆T字头螺栓.等级:1210 MPa(室温)/730℃ Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996
DIN EN 2936-1996 航空航天系列.高温镍基合金HI-P101HT(沃斯帕落伊合金)长螺纹细杆镀银T字头螺栓.等级:1210 MPa(室温)/730℃ Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996
DIN EN 2942-1998 航空航天系列.,NI-PH2801(因康X750)耐高温镍基合金制镀银自锁螺旋形线圈螺纹衬套 Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998
DIN EN 2955-1993 航空航天系列.钛和钛合金废料回收 Aerospace series; recycling of titanium and titanium alloy scrap; German version EN 2955:1993
DIN EN 2955/A1-1995 航空航天系列.钛和钛合金废料的再加工; 德文版本 EN 2955:1993/AC:1995 Aerospace series - Recycling of titanium and titanium alloy scrap; German version EN 2955:1993/AC:1995
DIN EN 3005-2005 航空航天系列.镀银或未涂覆的耐热镍基合金NI-PH1302制MJ螺纹自锁紧螺母.等级:1210 MPa(室温)/730 鳦.技术规 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 °C - Technical specification; German and English version EN 3005:2004
DIN EN 3008-1998 航空航天系列.NI-P100HT(因康718)耐热镍基合金制长螺纹减轻杆的六角头螺栓.等级:1275 MPa/650℃ Aerospace series - Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C; German version EN 3008:1998
DIN EN 3009-1998 航空航天系列.NI-P100HT(因康718)耐热镍基合金制镀银的长螺纹减轻杆的六角头螺栓.等级:1275 MPa/650℃ Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998
DIN EN 3010-1998 航空航天系列.NI-P101HT(Waspaloy)耐热镍基合金制长螺纹减轻杆的六角头螺栓.等级:1210 MPa/730℃ Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 °C; German version EN 3010:1998
DIN EN 3011-1998 航空航天系列.NI-P101HT (Waspaloy)耐热镍基合金制镀银的长螺纹减轻杆的六角头螺栓.等级:1210 MPa/730℃ Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa/730 °C; German version EN 3011:1998
DIN EN 3012-1995 航空航天系列.耐高温镍基合金HI-P101HT自锁十二角螺母.等级:1210Mpa(室温)/730℃; 德文版本 EN 3012:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995
DIN EN 3013-1995 航空航天系列.镀银耐高温镍基合金(NI-P101HT)自锁十二角螺母.等级:1210MPa(室温下)/730℃; 德文版本 EN 301 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3013:1995
DIN EN 3035-1996 航空航天系列.合金钢镀镉短螺纹带翼型十字槽的100度沉头配合螺钉.等级:1100MPa(室温)/235℃ Aerospace series - 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996
DIN EN 3037-1996 航空航天系列.钛合金钢阳极处理MoS<2>锻造短螺纹带翼型十字槽平头配合螺钉.等级:1100MPa(室温)/315℃ Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated - Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996
DIN EN 3063-1994 航空航天系列.耐高温镍基合金 NI-P101HT(沃斯帕洛尹合金) 中长螺纹十二角紧公差螺栓.等级:1210MPa (室温) Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994
DIN EN 3080-2007 航空航天系列.钛合金8°30'管接头.带有推力线螺母的缩短三通 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006
DIN EN 3081-2002 航空航天系列.钛合金管连接件 8°30'.带动态光束密封端头的修理用焊接箍; 德文版本 EN 3081:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001
DIN EN 3082-2004 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead welded end, for repair; German and English version EN 3082:2001 + AC:2003
DIN EN 3083-2004 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long welded end, for repair; German and English version EN 3083:2001 + AC:2003
DIN EN 3084-2004 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded end threaded for repair; German and English version EN 3084:2001 + AC:2003
DIN EN 3112-1995 航空航天系列.镀隔合金钢全螺纹公称六角头螺拴.等级:900MPa(室温下)/235℃; 德文版本 EN 3112:1995 Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3112:1995
DIN EN 3114-001-2007 航空航天系列.试验方法.(α+ β)钛合金锻件微结构.第001部分:一般要求 Aerospace series - Test method - Microstructure of ( + ?) titanium alloy wrought products - Part 001: General requirements; German and English version EN 3114-001:2006
DIN EN 3114-002-2007 航空航天系列.试验方法.(α+β)钛合金锻造制品的微观结构.第002部分:棒材、型材、锻坯和锻件的微观结构 Aerospace series - Test method - Microstructure of ( + ) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings; German and English version EN 3114-002:2007
DIN EN 3114-003-2007 航空航天系列.试验方法.(α+ β)钛合金锻件微结构.第003部分:厚板材微型结构 Aerospace series - Test method - Microstructure of ( + ?) titanium alloy wrought products - Part 003: Microstructure of plate; German and English version EN 3114-003:2006
DIN EN 3114-004-2007 航空航天系列.试验方法.(α+ β)钛合金锻件微结构.第004部分:超塑性材料合成薄板的微型结构 Aerospace series - Test method - Microstructure of ( + ?) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming; German and English version EN 3114-004:2006
DIN EN 3141-1996 航空航天系列.耐高温镍基合金钢NI-P11镀镉带通用头的全铆钉.英制系列 Aerospace series - Rivets, solid, universal head, in head resisting nickel base alloy NI-P11, cadmium plated, inch based series; German version EN 3141:1996
DIN EN 3142-1996 航空航天系列.耐高温镍基合金钢NI-P11带通用头的全铆钉.英制系列 Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series; German version EN 3142:1996
DIN EN 31427-1995 银珠宝合金中银的测定.溴化钾容量(电势测定)测定法 (ISO 11427:1993、包括修改件 1:1994) (包括 EN 31427:1 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993, includes Corr. 1:1994) (includes EN 31427:1994/AC:1994); German version EN 31427:1994
DIN EN 3150-1995 航空航天系列.耐高温镍基合金NI-P100HI(因康718)无头台肩销; 德文版本 EN 3150:1995 Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3150:1995
DIN EN 3151-1995 航空航天系列.耐高温镍基合金NI-P100HI(因康718)普通定位销; 德文版本 EN 3151:1995 Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3151:1995
DIN EN 3236-1998 航空航天系列.NI-P100HT(因康718)耐热镍基合金制薄壁自锁短镶嵌件.镀银内螺纹 Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Silver plated internal thread; German version EN 3236:1998
DIN EN 3237-1998 航空航天系列.NI-P100HT(因康718)耐热镍基合金制薄壁自锁长镶嵌件.镀银内螺纹 Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100 HT (Inconel 718) - Silver plated internal thread; German version EN 3237:1998
DIN EN 3239-1995 航空航天系列.镀银螺纹耐高温镍基合金NI-P101HT(沃斯帕洛尹合金)自锁十二角螺母.等级:1210MPa(室温)/730℃; Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 °C; German version EN 3239:1995
DIN EN 3243-2002 航空航天系列.钛合金8°30'管连接件.带动态束密封端的金属圈焊接; 德文版本 EN 3243:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrule welded, with dynamic beam seal end; German version EN 3243:2001
DIN EN 3244-2002 航空航天系列.钛合金8°30'管连接件.双端管接头 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, double ended; German version EN 3244:2001
DIN EN 3245-2002 航空航天系列.钛合金8°30'管连接件.异径管接头; 德文版本 EN 3245:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, reducer; German version EN 3245:2001
DIN EN 3246-2002 航空航天系列.钛合金8°30'管连接件.闷头管接头; 德文版本 EN 3246:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead; German version EN 3246:2001
DIN EN 3247-2002 航空航天系列.钛合金8°30'管连接件.焊接端的闷头管接头; 德文版本 EN 3247:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, welded end; German version EN 3247:2001
DIN EN 3248-2003 航空航天系列.钛合金管联接器8°30’.带锁紧环的缩径管端头转接器 Aerospace series - Pipe coupling 8°30' in titanium alloy - Adapters, reduced pipe end, with locking ring; German and English version EN 3248:2001
DIN EN 3264-2002 航空航天系列.钛合金8°30'管连接件.推力金属丝螺母; 德文版本 EN 3264:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Thrust wire nuts; German version EN 3264:2001
DIN EN 3266-2002 航空航天系列.钛合金管连接件.闷头螺母; 德文版本 EN 3266:2001 Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut; German version EN 3266:2001
DIN EN 3267-2002 航空航天系列.钛合金闷头垫圈; 德文版本 EN 3267:2001 Aerospace series - Washers, bulkhead, in titanium alloy; German version EN 3267:2001
DIN EN 3268-2002 航空航天系列.钛合金8°30'管连接件.压力插头; 德文版本 EN 3268:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Pressure plug; German version EN 3268:2001
DIN EN 3269-2006 航空航天系列.8°30'钛合金管接头.带动态梁密封端的单头卡套.德文和英文版本EN 3269-2001 Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001
DIN EN 3270-2004 航空航天系列.8°30'钛合金管连接件.带锁紧环的堵塞 Aerospace series - Pipe coupling 8°30 in titanium alloy - Blanking plugs with lockring; German and English version EN 3270:2001 + AC:2003
DIN EN 3273-2006 航空航天系列.钛合金管连接件8°30'.弯头、十字管和三通管用动梁密封端头.几何配置 Aerospace series - Pipe coupling 8°30′ - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration; German and English version EN 3273:2001
DIN EN 3297-1998 航空航天系列.NI-P100HT(因康718)耐热镍基合金制MJ螺纹的薄壁自锁镶嵌件.技术规范 Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification; German version EN 3297:1998
DIN EN 3303-1997 航空航天系列.镀镉合金钢中等螺纹长度内六角圆柱形螺钉.等级:1100MPa(室温)/235℃ Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997
DIN EN 3304-1996 航空航天系列.钛合金阳极处理MoS<2>锻造短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温)/31 Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996
DIN EN 3305-1996 航空航天系列.合金钢镀镉短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温)/235℃ Aerospace series - Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996
DIN EN 3306-1996 航空航天系列.钛合金阳极化MoS2润滑短螺纹接近顶点带翼形十字槽的100度沉头螺丝.等级: 1100MPa/315℃ Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996
DIN EN 3307-1996 航空航天系列.钛合金阳极处理MoS<2>锻造螺纹接近根部带翼型十字槽平头螺钉.等级:1100MPa(室温)/315℃ Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996
DIN EN 3308-1996 航空航天系列.钛合金阳极化MoS2润滑螺纹接近顶点的六角螺丝.等级:1100MPa/315℃ Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996
DIN EN 3332-2006 航空航天系列.铝合金AL-P7475-T762.覆层板材及带材.1.0mm≥a ≥6mm Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 3332:2005
DIN EN 3333-2006 铝合金AL-P7475-T762.薄板和带材.0.6mm≥a≥6mm Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm a 6 mm; German and English version EN 3333:2005
DIN EN 3335-2006 航空航天系列.铝合金AL.P7475-O2.超塑成形薄板材(SPF).0.8mm≥a≥6mm Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm; German and English version EN 3335:2005
DIN EN 3338-2006 航空航天系列.铝合金AL-P7050-T74511.挤压棒材和型材.a或D<=150mm周边晶粒控制 Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3338:2005
DIN EN 3339-2007 航天航空系列.AL-P7010-T76型铝合金.模锻件.a≤200mm Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm; German and English version EN 3339:2006
DIN EN 3341-2006 航空航天系列.铝合金AL-P6061-T4或T42.薄板材和带材.0.4mm≥a≥6mm Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 3341:2005
DIN EN 3342-2006 航空航天系列.铝合金AL-P6061-T4或T42.挤压棒材和型材.a或D<=150mm Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D 150 mm; German and English version EN 3342:2005
DIN EN 3344-2006 航空航天系列.铝合金AL-P7050-T76511.挤压棒和型材.a或D<= 150 mm周边粗粒控制 Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3344:2005
DIN EN 3347-2006 航空航天系列.铝合金AL-P2024-T8511.挤压棒材和型材.a/D≤150mm周边粗粒控制 Aerospace series - Aluminium alloy AL-P2024-T8511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3347:2005
DIN EN 3379-1996 航空航天系列.高温镍基合金NI-P101HT(沃斯帕落伊合金)厚螺母用中螺纹十二角配合螺栓.等级:1210 MPa(室温)/7 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996
DIN EN 3444-2007 航空航天系列.钝化处理的耐热镍基合金中长度螺纹紧公差标准螺杆的大双六角头螺栓.等级:1250MPa(室温)/650℃ Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature)/650 °C; German and English version EN 3444:2006
DIN EN 3474-2006 航空航天系列.铝合金AL-P2024-T81.薄板材和带材.0.25mm≥a≥6mm Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm; German and English version EN 3474:2005
DIN EN 3506-2003 航空航天系列.热轧薄板材耐热合金板材.厚度2.0mm～100mm.尺寸 Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm; Dimensions; German and English version EN 3506:2001
DIN EN 3542-1998 航空航天.自锁、耐高温镍基合金NIPH2801(因康X750)制金属丝螺纹组件 Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750); German version EN 3542:1998
DIN EN 3552-2006 航空航天系列.铝合金AL-P2618A-T6或T62.覆层薄板和带材.0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 3552:2005
DIN EN 3553-2006 航空航天系列.铝合金AL-P2618A-T6511.挤压棒材和型材.a/D≤160 mm Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D ≤ 160 mm; German and English version EN 3553:2004
DIN EN 3561-2004 航空航天系列.钛合金管连接件8°30'.在管端焊接和轧制的带动梁密封端头的箍 Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end; German and English version EN 3561:2001 + AC:2003
DIN EN 3566-2004 航空航天系列.钛合金管连接件8°30'.带锁紧环的接头 Aerospace series - Pipe coupling 8°30 in titanium alloy - Adaptors with lockring; German and English version EN 3566:2001 + AC:2003
DIN EN 3638-2007 航空航天系列.FE-PA2601(X6NiCrTiMoV26-15)型耐热合金.自耗电极再熔炼.溶解和沉淀处理.0.5mm≤a≤10mm的薄 Aerospace series - Heat resisting alloy FE-PA2601(X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm a 10 mm; German and English version EN 3638:2007
DIN EN 3665-1997 航空航天系列.清漆和涂料试验方法.铝合金耐纤维状腐蚀试验 Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997
DIN EN 3671-2007 航空航天系列.NI-PH3601(NiCr22Mo9Nb)型抗热合金.非热处理.锻坯.a或D≤250mm Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D 250 mm; German and English version EN 3671:2007
DIN EN 3683-2007 航空航天系列.试验方法.钛合金锻造制品.初级α含量的测定.点数法和线截法 Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary content - Point count method and line intercept method; German and English version EN 3683:2007
DIN EN 3684-2007 航空航天系列.试验方法.钛合金锻造制品.β转变温度的测定.金相法 Aerospace series - Test methods - Titanium alloy wrought products - Determination of transus temperature - Metallographic method; German and English version EN 3684:2007
DIN EN 3688-2004 航空航天系列.焊接管用钛合金制成的T环形填充物.14000kPa标称压力 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPa nominal pressure; German and English version EN 3688:2001 + AC:2003
DIN EN 3689-2004 航空航天系列.焊接管用钛合金制成的T环形填充物.28000kPa标称压力 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure; German and English version EN 3689:2001 + AC:2003
DIN EN 3690-2004 航空航天系列.钛合金管连接件8°30'.长闷头活接头 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long; German and English version EN 3690:2001 + AC:2003
DIN EN 3691-2004 航空航天系列.钛合金管连接件8°30'.焊接端长闷头活接头 Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long, welded end; German and English version EN 3691:2001 + AC:2003
DIN EN 3719-2006 航空航天系列.电缆的铝或铝合金导体.产品标准 Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard; German and English version EN 3719:2005
DIN EN 3724-2005 航空航天系列.MoS2涂覆的钛合金TI-P64001制长螺纹细杆双六角头螺栓.强度等级:1100 MPa(室温) Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004
DIN EN 3725-2005 航空航天系列.MoS2涂覆的阳极化处理的钛合金TI-P64001制长螺纹标准杆六凸角凹口盘头螺钉.强度等级:1100 MPa Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004
DIN EN 3730-2003 航空航天系列.带橡胶垫圈的铝合金固定和滑动支架夹具.尺寸和质量 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 3730:2001
DIN EN 3740-1996 航空航天系列.钛合金阳极处理MoS<2>锻造短螺纹小头六角配合螺钉.等级:1100MPa(室温)/315℃ Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3740:1996
DIN EN 3769-1997 航空航天系列.耐蚀钢和耐高温合金电解抛光 Aerospace series - Electrolytic polishing of corrosion resistant steels and heat resisting alloys; German version EN 3769:1997
DIN EN 3818-2005 航空航天系列.钛合金TI-P64001制MJ螺纹螺栓.强度等级:1100 MPa(室温).技术规范 Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 3818:2004
DIN EN 3820-2007 航空航天系列.MoS2润滑的阳极化钛合金短螺纹标准杆粗公差普通六角头米制螺钉.等级:1100MPa(室温下)/315℃ Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006
DIN EN 3832-2005 航空航天系列.耐热镍基合金NI-P100HT(铬镍铁合金718)制长螺纹细杆双六角头螺栓.等级:1550MPa(室温)/650℃ Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004
DIN EN 3833-2005 航空航天系列.钝化的耐热镍基合金NI-PH2601(铬镍铁合金718)制MJ螺纹螺栓.等级:1550MPa(室温)/650℃.技术规 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature)/ 650 °C - Technical specification; German and English version EN 3833:2004
DIN EN 3851-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.直转动螺套 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nut, straight; German and English version EN 3851:2003
DIN EN 3852-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.有螺纹的焊接直活管节 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded; German and English version EN 3852:2002
DIN EN 3853-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.有螺纹直活管节 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, threaded; German and English version EN 3853:2002
DIN EN 3854-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.焊接套圈 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Ferrules, welded; German and English version EN 3854:2002
DIN EN 3855-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.帽 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Caps; German and English version EN 3855:2002
DIN EN 3856-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.推力线用转动螺套 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire; German and English version EN 3856:2002
DIN EN 3857-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.90焊接弯头 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Elbows 90°, welded; German and English version EN 3857:2002
DIN EN 3858-2003 航空航天系列.钛合金TI-P64001、球形、60度管连接器.止推钢丝FE-PA 13 Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA 13; German and English version EN 3858:2002
DIN EN 3867-2007 航空航天系列.管连接件、活动法兰和密封件.TI-P64001型钛合金法兰 Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001; German and English version EN 3867:2004
DIN EN 3868-2007 航空航天系列.管连接件、活动法兰和密封件.TI-P64001型钛合金焊接法兰联接件 Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001; German and English version EN 3868:2004
DIN EN 3869-2007 航空和航天系列.管道联接件、活动法兰和密封件.铝合金碳氟橡胶和电枢密封件 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; German and English version EN 3869:2004
DIN EN 3872-2005 航空航天系列.铝合金AL-R39002-H112.模锻件.a 200 mm Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a 200 mm; German and English version EN 3872:2005
DIN EN 3882-2002 航空航天系列.耐高温合金NI-WH1801 (NiCr20Co18Ti3Al2).焊接填充金属; 德文版本 EN 3882:2001 Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding; German version EN 3882:2001
DIN EN 3883-2002 航空航天系列.耐高温合金NI-WH2301 (NiCr22Fe19Mo9Co2).焊接填充金属; 德文版本 EN 3883:2001 Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding; German version EN 3883:2001
DIN EN 3884-2002 航空航天系列.耐高温合金NI-WH2601 (NiCr19Nb5Mo3Ti).焊接填充金属; 德文版本 EN 3884:2001 Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding; German version EN 3884:2001
DIN EN 3885-2002 航空航天系列.耐高温合金NI-WH3601 (NiCr22Mo9Nb4).焊接填充金属; 德文版本 EN 3885:2001 Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding; German version EN 3885:2001
DIN EN 3886-2002 航空航天系列.耐高温合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接填充金属; 德文版本 EN 3886:2001 Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding; German version EN 3886:2001
DIN EN 3887-2002 航空航天系列.耐高温合金CO-WH4101 (CoCr20W15Ni).焊接填充金属; 德文版本 EN 3887:2001 Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding; German version EN 3887:2001
DIN EN 3888-2002 航空航天系列.耐高温合金CO-WH1402 (CoCr22Ni22W15).焊接填充金属; 德文版本 EN 3888:2001 Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding; German version EN 3888:2001
DIN EN 3892-2002 航空航天系列.钛合金TI-W64001.焊接填充金属; 德文版本 EN 3892:2001 Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding; German version EN 3892:2001
DIN EN 3893-2003 航空航天系列.TI-W19001型钛合金.焊接用金属填充料 Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding; German and English version EN 3893:2001
DIN EN 3894-2002 航空航天系列.耐高温合金NI-WD3201 (NiMo25Fe6Cr5).焊接填充金属; 德文版本 EN 3894:2001 Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding; German version EN 3894:2001
DIN EN 3895-2002 航空航天系列.耐高温合金NI-WH3901 (NiCr16Mo15).焊接填充金属; 德文版本 EN 3895:2001 Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding; German version EN 3895:2001
DIN EN 3907-2006 航空航天系列.标准杆、长螺纹、双六角头、镀MoS<指数2>的钛合金TI-P64001螺栓.等级:1100MPa(室温)/350°C. Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/350 °C: German and English version EN 3907:2004
DIN EN 3917-1998 航空航天系列.NI-B41201( NiCrSi5b3C )镍基合金.粉状或糊状硬焊金属填料 Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing, powder or paste; German version EN 3917:1998
DIN EN 3918-1998 航空航天系列.NI-B41201(NiCrSi5b3C)镍基合金.带状硬焊金属填料 Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing, tape; German version EN 3918:1998
DIN EN 3919-1998 航空航天系列.NI-B41202 (NiCr14Si5B3)镍基合金.硬钎焊用金属填料.非结晶薄片 Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil; German version EN 3919:1998
DIN EN 3920-2004 航空航天系列.镍基合金NI-B41202 (NiCr14Fe5Si5B3).硬钎焊用粉末状和膏状填充金属 Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing, powder or paste; German and English version EN 3920:2001
DIN EN 3921-2001 航空航天系列.镍基合金 Ni-B41203(NiCr7Si5B3).硬钎焊填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing, amorphous foil; German version EN 3921:2001
DIN EN 3922-1998 航空航天系列.NI-B41203 (NiCr7Si5B3)镍基合金.硬钎焊用金属填料.硼薄片 Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil; German version EN 3922:1998
DIN EN 3923-2004 航空航天系列.镍基合金NI-B41203.铜焊用填充金属、粉末或糊料 Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing, powder or paste; German and English version EN 3923:2001
DIN EN 3924-1998 航空航天系列.NI-B41203 (NiCr7Si5B3)镍基合金.硬钎焊用金属填料.带形焊料 Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape; German version EN 3924:1998
DIN EN 3925-2001 航空航天系列.镍基合金 Ni-B40001(NiSi5B3).硬钎焊填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing, amorphous foil; German version EN 3925:2001
DIN EN 3926-2001 航空航天系列.镍基合金NI-B40001(NiSi5B3).硬钎焊填充金属.硼化物箔 Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing, borided foil; German version EN 3926:2001
DIN EN 3927-2004 航空航天系列.镍基合金NI-B40001.铜焊用填充金属、粉末或糊料 Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing, powder or paste; German and English version EN 3927:2001
DIN EN 3928-1998 航空航天系列.NI-B40001 (NiSi5B3)镍基合金.硬钎焊用金属填料.带形焊料 Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape; German version EN 3928:1998
DIN EN 3930-2002 航空航天系列.镍基合金NI-B31001(NiCr19Si10).硬钎焊用填充金属.粉末或糊料; 德文版本 EN 3930:2001 Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing, powder or paste; German version EN 3930:2001
DIN EN 3931-1998 航空航天系列.NI-B31001(NiCr19Si10)镍基合金.带状硬焊金属填料 Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing, tape; German version EN 3931:1998
DIN EN 3932-2001 航空航天系列.镍基合金NI-B13001(NiP11).硬钎焊用填充金属.非晶形箔 Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing, amorphous foil; German version EN 3932:2001
DIN EN 3933-2002 航空航天系列.镍基合金NI-B13001 (NiP11).铜焊用焊料.粉末或糊料; 德文版本 EN 3933:2001 Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing, powder or paste; German version EN 3933:2001
DIN EN 3934-2001 航空航天系列.镍基合金NI-B21001(NiCr15B4).硬钎焊用填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing, amorphous foil; German version EN 3934:2001
DIN EN 3935-2004 航空航天系列.镍基合金NI-B21001.铜焊用填充金属、硼化物箔 Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing, borided foil; German and English version EN 3935:2001
DIN EN 3936-2002 航空航天系列.镍基合金NI-B21001 (NiCr15B4).铜焊用填充金属.粉末或糊料; 德文版本 EN 3936:2001 Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing, powder or paste; German version EN 3936:2001
DIN EN 3937-2002 航空航天系列.镍基合金NI-B44101 (NiW12Cr10Si4Fe3B3).铜焊用填充金属.粉末或糊料; 德文版本 EN 3937:2001 Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing, powder or paste; German version EN 3937:2001
DIN EN 3938-2001 航空航天系列.镍基合金 Ni-B46001(NiCo20Si5B3).硬钎焊填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing, amorphous foil; German version EN 3938:2001
DIN EN 3939-2004 航空航天系列.镍基合金NI-B46001(NiCo20Si5B3).硬钎焊用粉末状和膏状填充金属 Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing, powder or paste; German and English version EN 3939:2001
DIN EN 3940-1998 航空和航天系列.NI-B46001 (NiCo20Si5B3)镍基合金.硬钎焊用金属填料.带形焊料 Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Tape; German version EN 3940:1998
DIN EN 3941-2001 航空航天系列.镍基合金 Ni-B41204(NiCr13Si4B3).硬钎焊填充金属.非晶态箔 Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing, amorphous foil; German version EN 3941:2001
DIN EN 3942-2001 航空航天系列.镍基合金NI-B41204(NiCr13Si4B3).硬钎焊填充金属.硼化物箔 Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing, borided foil; German version EN 3942:2001
DIN EN 3943-2004 航空航天系列.镍基合金NI-B41204.铜焊用填充金属、粉末或糊料 Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing, powder or paste; German and English version EN 3943:2001
DIN EN 3944-1998 航空和航天系列.NI-B41204 (NiCr13Si4B3)镍基合金.硬钎焊用金属填料.带形焊料 Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape; German version EN 3944:1998
DIN EN 3945-2004 航空航天系列.镍基合金NI-B48801.铜焊用填充金属、粉末或糊料 Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing, powder or paste; German and English version EN 3945:2001
DIN EN 3946-2004 航空航天系列.镍基合金NI-B15701.铜焊用填充金属、粉末或糊料 Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing, powder or paste; German and English version EN 3946:2001
DIN EN 3947-1998 航空和航天系列.NI-B15701 (NiPd34Au30)镍基合金.硬钎焊用金属填料.滚压薄片 Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil; German version EN 3947:1998
DIN EN 3948-1998 航空和航天系列.NI-B15701 (NiPd34Au30)镍基合金.硬钎焊用金属填料.线材焊料 Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire; German version EN 3948:1998
DIN EN 3952-2002 航空航天系列.银基合金AG-B10001 (AgCu28).铜焊用填充金属.金属线; 德文版本 EN 3952:2001 Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing, wire; German version EN 3952:2001
DIN EN 3953-2002 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).铜焊用填充金属.金属丝; 德文版本 EN 3953:2001 Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing, wire; German version EN 3953:2001
DIN EN 3954-2002 航空航天系列.银基合金AG-B12401 (AgCu40Zn5Ni).铜焊用填充金属.粉末或糊料; 德文版本 EN 3954:2001 Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing, powder or paste; German version EN 3954:2001
DIN EN 3955-2002 航空航天系列.银基合金AG-B12401 (AgCu40Zn5Ni).铜焊用填充金属.轧制箔片; 德文版本 EN 3955:2001 Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing, rolled foil; German version EN 3955:2001
DIN EN 3956-2002 航空航天系列.银基合金AG-B14001 (AgCu42Ni2).铜焊用填充金属.金属线; 德文版本 EN 3956:2001 Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing, wire; German version EN 3956:2001
DIN EN 3957-2002 航空航天系列.银基合金AG-B14001 (AgCu42Ni2).铜焊用填充金属.粉末和糊料; 德文版本 EN 3957:2001 Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing, powder or paste; German version EN 3957:2001
DIN EN 3958-2002 航空航天系列.银基合金AG-B14001 (AgCu42Ni2).铜焊用填充金属.轧制箔片 Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing, rolled foil; German version EN 3958:2001
DIN EN 3959-2002 航空航天系列.钴基合金CO-B41601(CoCr19Ni17Si8W4).铜焊用填充金属.粉末和糊料; 德文版本 EN 3959:2001 Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing, powder or paste; German version EN 3959:2001
DIN EN 3960-2002 航空航天系列.金基合金AU-B40001 (AuNi18).铜焊用填充金属.粉末和糊料; 德文版本 EN 3960:2001 Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing, powder or paste; German version EN 3960:2001
DIN EN 3961-2002 航空航天系列.金基合金AU-B40001.铜焊填充金属:轧制箔片; 德文版本 EN 3961:2001 Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing, rolled foil; German version EN 3961:2001
DIN EN 3962-2002 航空航天系列.金基合金AU-B40001.铜焊填充金属:线材; 德文版本 EN 3962:2001 Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing, wire; German version EN 3962:2001
DIN EN 3965-2002 航空航天系列.钛合金TI-B17001.铜焊填充金属:轧制箔片; 德文版本 EN 3965:2001 Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing, rolled foil; German version EN 3965:2001
DIN EN 3976-2007 航空航天系列.钛和钛合金.试验方法.测定氢含量的化学分析. Aerospace series - Titanium and titan