国内外焊接标准
welding standards
美国焊接标准(ANSI welding standards)
--------------------------------------------------------------------------------
编号 中文名称 英文名称
ANSI MH26.2-2007 焊接线架盖板的设计、测试和利用 Design, Testing,
and Utilization of Welded-Wire Rack Decking
ANSI Z49.1-2005 焊接、切割和相关工艺中的安全 Welding, Cutting
and Allied Processes, Safety in
ANSI/API 1104-1999 管道和相关设施的焊接 Welding of Pipelines
and Related Facilities
ANSI/API 599-2002 金属塞阀.法兰和焊接端 Metal Plug Valves
- Flanged and Welding Ends
ANSI/ASME B16.11-2009 焊接螺纹承口锻造管件 Forged Fittings,
Socket-Welding and Threaded
ANSI/ASME B16.22-2001 锻铜和铜合金钎焊接压力连接件 Wrought
Copper and Copper Alloy Solder-Joint Pressure
Fittings
ANSI/ASME B16.25-2007 对接焊接端 Buttwelding Ends
ANSI/ASME B16.34-2009 法兰,螺纹和焊接端连接的阀门 Valves
- Flanged, Threaded, and Welding End
ANSI/ASME B29.200-2001 焊接钢型滚轧链条.焊接钢牵引链.附件和链轮齿
Welded-Steel-Type Mill Chains, Welded-Steel-Type
Drag Chains, Attachments, and Sprockets
ANSI/ASME B36.10M-2004 焊接锻钢管和无缝锻钢管 Welded and
Seamless Wrought Steel Pipe
ANSI/ASME BPVCSection IX-2010 焊接和钎焊质量(5/12/09和2/5/09
会议) Welding and Brazing Qualifications (5/12/09
and 2/5/09 Meeting)
ANSI/ASTM A249/A 249M-2001 焊接奥氏体钢锅炉、过热器、热交换器和冷凝器管规范
Specification for Welded Austenitic Steel Boiler,
Superheater, Heat-Exchanger, and Condenser Tubes
ANSI/ASTM A312/A 312M-2001 无缝和焊接奥氏体不锈钢管规范 Specification
for Seamless and Welded Austenitic Stainless
Steel Pipes
ANSI/ASTM A500-2001 圆钢与型钢的冷变形焊接与无缝碳素钢结构管规范 Specification
for Cold-Formed Welded and Seamless Carbon Steel
Structural Tubing in Rounds and Shapes
ANSI/ASTM A688/A 688M-2001 奥氏体不锈钢焊接给水加热器管规范
Specification for Welded Austenitic Stainless
Steel Feedwater Heater Tubes
ANSI/ASTM A704-1996 混凝土加筋用焊接普通钢棒或钢杆规范 Specification
for Welded Steel Plain Bar or Rod Mats for Concrete
Reinforcement
ANSI/ASTM A789/A 789M-2001 普通设备用无缝与焊接铁素体/奥氏体不锈钢管规范
Specification for Seamless and Welded Ferritic/Austenitic
Stainless Steel Tubing for General Service
ANSI/ASTM A814/A 814M-2001 冷加工焊接奥氏体不锈钢管规范 Specification
for Cold-Worked Welded Austenitic Stainless
Steel Pipe
ANSI/ASTM B546-1998 电熔焊接镍铬钶钼合金(UNS N06617)、镍铁铬硅合金(UNS
N08330 and UNS N08332)、 镍铬铁合金(UNS N06025)和 Specification
for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy
(UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330
and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025),
and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ANSI/ASTM B619-2000 焊接用镍和镍钴合金管规范 Specification
for Welded Nickel and Nickel-Cobalt Alloy Pipe
ANSI/ASTM B626-2001 焊接镍和镍钴合金管规范 Specification
for Welded Nickel and Nickel-Cobalt Alloy Tube
ANSI/ASTM B705-2000 镍合金焊接管规范 Specification for
Nickel-Alloy (UNS N06625 and N08825) Welded
Pipe
ANSI/ASTM B710-1999 镍铁铬硅合金焊接管规范 Specification
for Nickel-Iron-Chromium Silicon-Alloy Welded
Pipe
ANSI/ASTM B725-1996 焊接镍(UNS N02200/UNS No2201)和镍铜合金(UNS
N04400)管规范 Specification for Welded Nickel (UNS
N02200/UNS No2201) and Nickel-Copper Alloy (UNS
N04400) Pipe
ANSI/ASTM B730-1996 焊接镍和镍铜合金管(UNS N04400)规范
Specification for Welded Nickel (UNS N02200/UNS
N02201) and Nickel Copper Alloy (UNS N04400)
Tube
ANSI/ASTM B742-1990 电焊接点用已加工优质银材料规范 Specification
for Fine Silver Electrical Contact Fabricated
Material
ANSI/ASTM B804-1996 UNS N08367和UNS N08926焊接管规范
Specification for UNS N08367 and UNS N08926
Welded Pipe
ANSI/ASTM F1074-1997 焊接喇叭型绳栓规范 Specification
for Cleats, Welded Horn Type
ANSI/ASTM F1076-1997 管用扩张焊接及银黄铜套管连接件惯例 Practice
for Expanded Welded and Silver Brazed Socket
Joints for Pipe and Tube
ANSI/ASTM F1145-1997 冷锻、焊接、锻制松紧螺纹扣规范 Specification
for Turnbuckles, Swaged, Welded, Cast, Forged
ANSI/ASTM F1199-1988 铸造(所有温度和压力)和焊接管线滤网(150
psig和150°F最大值)的规范 Specification for Cast (All
Temperatures and Pressures) and Welded Pipe
Line Strainers (150 psig and 150°F Maximum)
ANSI/ASTM F1200-1988 装配式(焊接)管线滤网(大于150 psig和150°F)规范
Specification for Fabricated (Welded) Pipe Line
Strainers (Above 150 psig and 150°F)
ANSI/ASTM F1934-1998 焊接背包或登山帐篷试验方法 Test Method
for Welding a Backpack or Mountaineering Tent
ANSI/ASTM F722-1982 船上管道系统用焊接接头规范 Specification
for Welded Joints for Shipboard Piping Systems
ANSI/AWS A1.1-2001 焊接工业的米制实施规程指南 Metric Practice
Guide for the Welding Industry
ANSI/AWS A10.1M-2007 单相AC电阻焊接用次级电流传感线圈和焊接电流监视器校正和性能试验规范
Specification for Calibration and Performance
Testing of Secondary Current Sensing Coils and
Weld Current Monitors used in Single Phase AC
Resistance Welding
ANSI/AWS A2.4-2007 焊接、铜焊和无损检测用标准符号 Standard
Symbols for Welding, Brazing, and Nondestructive
Examination
ANSI/AWS A3.0M/A 3.0-2009 标准焊接术语和定义 Standard
Welding Terms and Definitions
ANSI/AWS A4.3-1993 测定马氏体、贝氏体和铁素体钢电弧焊接金属中可扩散氢含量的标准方法
Standard Methods for Determination of the Diffusible
Hydrogen Content of Martensitic, Bainitic, and
Ferritic Steel Weld Metal Produced by Arc Welding
ANSI/AWS A4.4M-2001 焊接助熔剂和电焊条助熔剂涂层含水量标准测定程序
Standard Procedures for Determination of Moisture
Content of Welding Fluxes and Welding Electrode
Flux Coverings
ANSI/AWS A5.01M/A 5.01-2008 焊接消耗品及相关工艺用程序指南.助熔剂和气体保护电焊接工艺
Procurement Guidelines for Consumables-Welding
and Allied Processes - Flux and Gas Shielded
Electrical Welding Processes
ANSI/AWS A5.1/A 5.1M-2003 电弧焊接碳钢涂料焊条规范 Carbon
Steel Covered Arc-Welding Electrodes, Specification
for
ANSI/AWS A5.11/A 5.11M-2010 保护金属电弧焊用镍和镍合金焊接电极规范
Specification for Nickel and Nickel-Alloy Welding
Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.2/A 5.2M-2007 氧燃料气焊接的碳钢和低合金钢棒材的规范
Specification for Carbon and Low Alloy Steel
Rods for Oxyfuel Gas Welding
ANSI/AWS A5.24/A 5.24M-2004 锆和锆合金焊接电极和焊条规范 Specification
for Zirconium and Zirconium Alloy Welding Electrodes
and Rods
ANSI/AWS A5.32/A 5.32M-1997 焊接保护气体规范 Specifications
for Welding Shielding Gases
ANSI/AWS A5.34/A 5.34M-2007 助熔剂芯电弧焊接用镍合金电极的规范
Specification for Nickel-Alloy Electrodes for
Flux Cored Arc Welding
ANSI/AWS A5.4/A 5.4M-2006 屏蔽金属电弧焊不锈钢焊接电极 Stainless
Steel Welding Electrodes for Shielded Metal
Arc Welding
ANSI/AWS A5.9/A 5.9M-2006 裸露不锈钢焊接电极和焊棒规范 Specification
for Bare Stainless Steel Welding Electrodes
and Rods
ANSI/AWS B1.10-2009 焊接非破坏性检验指南 Guide for the
Nondestructive Examination of Welds
ANSI/AWS B2.1-1-001-2006 在焊接条件下有垫板的3/16～3/4英寸厚的(M-1/P-1、1或2组)碳钢的屏蔽金属电弧焊的标准焊接程序规范(WPS)
Standard Welding Procedure Specification (WPS)
Shielded Metal Arc Welding of Carbon Steel,
(M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch,
in the As-Welded Condition, With Backing
ANSI/AWS B2.1-1-002-2006 焊接条件下、有或没有垫板的3/16～
7/8英寸(M-1/P-1)1或2组碳钢的气态钨电弧焊的标准焊接程序规范(WPS) Standard
Welding Procedure Specification (WPS) Gas Tungsten
Arc Welding of Carbon Steel, (M-1/P-1, Group
1 or 2), 3/16 through 7/8 inch, in the As-Welded
Condition, With or Without Backing
ANSI/AWS B2.1-1-003-2002 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的气体保护金属极电弧焊
Gas Metal Arc Welding of Galvanized Steel, 10
through 18 Gage, in the as-Welded Condition,
with or without Backing
ANSI/AWS B2.1-1-004-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的气体保护金属极电弧焊
Gas Metal Arc Welding of Carbon Steel (M1, Group
1), 10 through 18 Gage, in the as-Welded Condition,
with or without Backing
ANSI/AWS B2.1-1-007-2002 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的钨电极惰性气体保护焊
Gas Tungsten Arc Welding of Galvanized Steel,
10 through 18 Gage, in the as-Welded Condition,
with or without Backing
ANSI/AWS B2.1-1-008-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的钨电极惰性气体保护焊
Gas Tungsten Arc Welding of Carbon Steel (M-1,
Group 1), 10 through 18 Gage, in the as-Welded
Condition, with or without Backing
ANSI/AWS B2.1-1-011-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的镀锌钢的保护金属焊条电弧焊
Standard Welding Procedure Specification – Shielded
Metal Arc Welding of Galvanized Steel, 10 through
18 Gage, in the as-Welded Condition, with or
without Backing
ANSI/AWS B2.1-1-012-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的保护金属焊条电弧焊
Standard Welding Procedure Specification – Shielded
Metal Arc Welding of Carbon Steel (M-1, Group
1), 10 through 18 Gage in the as-Welded Condition,
with or without Backing
ANSI/AWS B2.1-1-016-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1,
1或2 Standard Welding Procedure Specification
(WPS) for Shielded Metal Arc Welding of Carbon
Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through
1-1/2 inch Thick, E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-017-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E6010碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1,
1或2 Standard Welding Procedure Specification
(WPS) for Shielded Metal Arc Welding of Carbon
Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through
1-1/2 inch Thick, E6010, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-018-2005 在焊接条件下1/8到1-1/2英尺厚E71T-8碳钢的自保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1,
1或 Standard Welding Procedure Specification
(WPS) for Self-Shielded Flux Cored Arc Welding
of Carbon Steel (M-1/P-1/S-1, Group 1 or 2),
1/8 through 1-1/2 inch Thick, E71T-8, As-Welded
Condition
ANSI/AWS B2.1-1-019-2005 在焊接条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1
Standard Welding Procedure Specification (WPS)
for CO2 Shielded Flux Cored Arc Welding of Carbon
Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through
1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded
Condition
ANSI/AWS B2.1-1-019-94-AMD 1-2010 在焊接条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1
Standard Welding Procedure Specification (WPS)
for CO2 Shielded Flux Cored Arc Welding of Carbon
Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through
1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded
Condition
ANSI/AWS B2.1-1-020-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的75%Ar/25%CO2保护助溶剂芯电弧焊的标准焊接程序规
Standard Welding Procedure Specification (WPS)
for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding
of Carbon Steel (M-1/P-1/S-1, Group 1 or 2),
1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1,
As-Welded or PWHT Condition
ANSI/AWS B2.1-1-020-94-AMD 1-2010 在焊接或PWHT条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的75%Ar/25%CO2保护助溶剂芯电弧焊的标准焊接程序规
Standard Welding Procedure Specification (WPS)
for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding
of Carbon Steel (M-1/P-1/S-1, Group 1 or 2),
1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1,
As-Welded or PWHT Condition
ANSI/AWS B2.1-1-021-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚ER70S-2和E7018碳钢的保护金属电弧焊和钨电极惰性气体保护电弧焊的标准
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding Followed by Shielded
Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,
Group 1 or 2), 1/8 through 1-1/2 inch Thick,
ER70S-2 and E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-022-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018和E6010(垂直上升)碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2
inch Thick, E6010 (Vertical Uphill) Followed
by E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-026-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018和E6010(垂直下降)碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2
inch Thick, E6010 (Vertical Downhill) Followed
by E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-201-2007 主要管道用焊接条件下E6010(垂直向上)及E7018(垂直向上)1/8～3/4英寸厚碳钢(M-1/P-1/S-1,组1或组2)的铠装金
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4
inch Thick, E6010 (Vertical Uphill) Followed
by E7018 (Vertical Uphill), As-Welded Condition,
Primarily Pipe Applic
ANSI/AWS B2.1-1-202-2007 主要用于管道的、在焊接条件下,1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳钢(M-1/P-1/S-1,1或2组
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4
inch Thick, E6010 (Vertical Downhill) Followed
by E7018 (Vertical Uphill), As-Welded Condition,
Primarily Pipe Appl
ANSI/AWS B2.1-1-203-2007 焊接条件下,有或没有垫板,18规格镀锌钢(M-1)的气体金属电弧焊(短循环传输模式)的标准焊接程序规范(WPS)
Standard Welding Procedure Specification (WPS)
for Gas Metal Arc Welding (Short Circuiting
Transfer Mode) of Galvanized Steel (M-1), 18
through Gauge, in the As-Welded Condition, with
or without Backing
ANSI/AWS B2.1-1-204-2007 主要用于管道的、在焊接条件下,1/8到3/4英寸厚、E6010(底部垂直向下和垂直向上达到平衡)碳钢(M-1/P-1/S-1,1
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4
inch Thick, E6010 (Vertical Downhill Root with
the Balance Vertical Uphill), As-Welded Condition,
Primarily Pipe Ap
ANSI/AWS B2.1-1-205-2007 主要管道用焊接或PWHT条件下E6010(垂直向上)及E7018(垂直向上)1/8～1-1/2英寸厚碳钢(M-1/P-1/S-1,组1或组2)
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2
inch Thick, E6010 (Vertical Uphill) Followed
by E7018 (Vertical Uphill), As-Welded or PWHT
Condition, (Primarily
ANSI/AWS B2.1-1-206-2007 带或不带衬板焊接条件下18～10规格碳钢与奥氏体不锈钢(M-1～M-8、P-8或S-8)的气体保护金属极电弧焊用标准焊
Standard Welding Procedure Specification (WPS)
for Gas Metal Arc Weldign (Short Circuiting
Transfer Mode) of Carbon Steel to Austenitic
Stainless Steel (M-1 to M-8, P-8, or S-8), 18
through 10 Gauge, in the As-Welded Condition,
with or without Backing
ANSI/AWS B2.1-1-207-2007 主要管道用焊接或PWHT条件下1/8～1-1/2英寸厚ER70S-2碳钢(M-1/P-1/S-1,组1或组2)的钨电极惰性气体保护焊用
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2
inch Thick, ER70S-2, As-Welded or PWHT Condition
(Primarily Pipe Applications)
ANSI/AWS B2.1-1-208-2007 主要管道用焊接或PWHT条件下1/8～1-1/2英寸厚E7018碳钢(M-1/P-1/S-1,组1或组2)的屏蔽金属电弧焊用标准焊接
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Carbon Steel
(M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2
inch Thick, E7018, As-Welded or PWHT Condition,
Primarily Pipe Applications
ANSI/AWS B2.1-1-209-2006 主要用于管道的、在焊接或PWHT条件下、1/8到1-1/2英寸厚、ER70S-2和E7018碳钢(M-1/P-1/S-1,1或2组)的屏蔽金
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding Followed by Shielded
Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,
Group 1 or 2), 1/8 through 1-1/2 inch Thick,
ER70S-2 and E7018, As-Welded or PWHT Condition
(Primarily Pip
ANSI/AWS B2.1-1-210-2001 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding with Consumable
Inserts of Carbon Steel (M-1/P-1/S-1, Group
1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1
and ER70S-2, As-Welded or PWHT Condition, Primarily
Pipe Applications
ANSI/AWS B2.1-1-211-2001 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding with Consumable
Inserts Followed by Shielded Metal Arc Welding
of Carbon Steel (M-1/P-1/S-1, Group 1 or 2),
1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2,
and E7018, As-Welded
ANSI/AWS B2.1-1-232-2006 主要管道设施仅平面位置焊接或PWHT条件下用ER70S-3和E7XT-X型1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组碳钢的氩
Standard Welding Procedure Specification (SWPS)
for Argon Plus 25% Carbon Dioxide Shielded Gas
Metal Arc Welding (Short Circuiting Transfer
Mode) followed by Argon Plus 25% Carbon Dioxide
Shielded Flux Cored Arc Welding of Carbon Steel
(M-1/P-1/S-1)Group
ANSI/AWS B2.1-1-233-2006 仅平面位置焊接或PWHT条件下用ER70S-3型1～1/2英寸厚(M-1/P-1/S-1)1或2组碳钢的氩气加25%二氧化碳气体保护
Standard Welding Procedure Specification (SWPS)
for Argon Plus 25% Carbon Dioxide Shielded Gas
Metal Arc Welding (Short Circuiting Transfer
Mode) followed by Argon Plus 2% Oxygen Shielded
Gas Metal Arc Welding (Spray Transfer Mode)
of Carbon Steel (M-1/P
ANSI/AWS B2.1-1-234-2006 焊接或PWHT情况的主要管道设施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组、E7XT-X型碳钢用氩气加25%二氧化碳的
Standard Welding Procedure Specification (SWPS)
for Argon plus 25% Carbon Dioxide Shielded Flux
Cored Arc Welding of Carbon Steel (M-1/P-1/S-1)
Groups 1 and 2, 1/8 through 1-1/2 inch thick,
E7XT-X, As-Welded or PWHT Condition, Primarily
Pipe Applicaitons
ANSI/AWS B2.1-1-235-2006 平面位置焊接或PWHT情况的主要管道设施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组、ER70S-3型碳钢的氩气加2%氧
Standard Welding Procedure Specification (SWPS)
for Argon plus 2% Oxygen Shielded Gas Metal
Arc Welding (Spray Transfer Mode) of Carbon
Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through
1-1/2 inch thick, ER70S-3, Flat Position Only,
As-Welded or PWHT Condi
ANSI/AWS B2.1-1/8-006-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的气体保护金属极电弧焊
Gas Metal Arc Welding of Carbon Steel to Austentic
Stainless Steel (M-1 to M-18, or P-8), 10 through
18 Gage, in the as-Welded Condition, with or
without Backing
ANSI/AWS B2.1-1/8-010-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的钨电极惰性气体保护焊
Gas Tungsten Arc Welding of Carbon Steel to
Austentic Stainless Steel (M-1 to M-8 or P-8),
10 through 18 Gage, in the as-Welded Condition,
with or without Backing
ANSI/AWS B2.1-1/8-014-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的保护金
Standard Welding Procedure Specification – Shielded
Metal Arc Welding of Carbon Steel to Austenitic
Stainless Steel (M-1 to M-8 or P-8), 10 through
18 Gage, in the as-Welded Condition, with or
without Backing
ANSI/AWS B2.1-1/8-228-2002 碳钢与奥氏体不锈钢屏蔽金属电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-8/P-8/S-8,
组1)1/8到1-1/2英寸厚,ER309 Welding Procedure Specification
(WPS) for Shielded Metal Arc Welding of Carbon
Steel to Austenitic Stainless Steel (M-1/P-1/S-1
Groups 1 and 2 Welded to M-8/P-8/S-8, Group
1) 1/8 through 1-1/2 inch thick, ER309-15, 16
or, 17, As-Welded Condition, Primari
ANSI/AWS B2.1-1/8-229-2002 碳钢与奥氏体不锈钢气体钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-
8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER30 Welding Procedure
Specification (WPS) for Gas Tungsten Arc Welding
Followed by Carbon Steel to Austenitic Stainless
Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to
M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch
thick, ER309 and E309-15, 16, or 17, As-Welded
C
ANSI/AWS B2.1-1/8-230-2002 气体保护钨极弧焊的标准焊接程序规范(WPS),可熔嵌入根部的,碳钢与奥氏体不锈钢(M-1/P-1/S-1,
组 1 和 2 焊 Standard Welding Procedure Specification
(WPS) for Gas Tungsten Arc Welding, with Consumable
Insert Root, of Carbon Steel to Austenitic Stainless
Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to
M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch
thick, IN309 and
ANSI/AWS B2.1-1/8-231-2002 带可熔嵌入焊条的碳钢与奥氏体不锈钢气体保护钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-
8/P-8/S-8, 组1) Welding Procedure Specification
(WPS) for Gas Tungsten Arc Welding, with Consumable
Insert Root, Followed by Shielded Metal Arc
Welding of Carbon Steel to Austenitic Stainless
Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to
M-8/P-8/S-8, Group 1) 1/8 through
ANSI/AWS B2.1-4-217-2009 主要管路用焊接后状态ER80S-B2,1/8至1/2英寸厚,焊后热处理状态1/8至3/4英寸厚的钨铬钼钢气体弧焊(M-4/P-4,1
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding of Chromium-Molybdenum
Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8
through 1/2 in. Thick, As-Welded Condition,
1/8 through 3/4 in. Thick, PWHT Condition, Primarily
Pipe Applications
ANSI/AWS B2.1-4-218-1999 标准焊接程序规范(WPS).主要用于管道的、在焊接或1/8到1-1/2英寸厚PWHT条件下、(M-4/P-4/S-4,1或2组)E8018-
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Chromium-Molybdenum
Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8
through 1/2 in. Thick, As-Welded Condition,
1/8 through 1-1/2 in. Thick, PWHT Condition,
Primarily Pipe Applications
ANSI/AWS B2.1-4-219-1999 气体保护钨极弧焊以及铬钼钢的气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在焊接条件下1/8到12
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding followed by Shielded
Metal Arc Welding of Chromium-Molybdenum Steel
(M-4/P-4, Group 1 or 2), 1/8 through 1/2 in.
Thick, As-Welded Condition, 1/8 through 1-1/2
in. Thick, PWHT Condition, ER80S-B2 and E8018-B2,
Primarily Pipe Applications
ANSI/AWS B2.1-4-220-1999 标准焊接程序规范(WPS).主要用于IN515,
ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-4/P-4/S-4,
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding (Consumable Insert
Root) of Chromium-Molybdenum Steel (M-4/P-4,
Group 1 or 2), E8018-B2, 1/8 through 1/2 in.
Thick, As-Welded Condition, 1/8 through 3/4
in. Thick, PWHT Condition, IN515 and ER80S-B2,
Primarily Pipe Applications
ANSI/AWS B2.1-4-221-1999 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding (Consumable Insert
Root) followed by Shielded Metal Arc Welding
of Chromium-Molybdenum Steel (M-4/P-4, Group
1 or 2), 1/8 through 1/2 in. Thick, As-Welded
Condition, 1/8 through 1-1/2 in. Thick, PWHT
Condition, IN515, ER80S-B2, and E8018-B2, Primarily
Pipe Applications
ANSI/AWS B2.1-5A-222-1999 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER
90S-BS,1/8到1/2英寸厚或在PWHT条件 Standard Welding Procedure
Specification (WPS)for Gas Tungsten Arc Welding
of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3,
1/8 through 1/2 in. Thick, As-Welded Condition,
1/8 through 3/4 in. Thick, PWHT Condition, Primarily
Pipe Applications
ANSI/AWS B2.1-5A-223-1999 铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER
9018-BS,1/8到1/2英寸厚或在PWHT条件下 Standard Welding
Procedure Specification (WPS) for Shielded Metal
Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A),
E9018-B3, 1/8 through 1/2 in. Thick, As-Welded
Condition, 1/8 through 1-1/2 in. Thick, PWHT
Condition, Primarily Pipe Applications
ANSI/AWS B2.1-5A-224-1999 气体保护钨极弧焊以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下1/8到1/2英寸厚或在P
Standard Welding Procedure Specification (WPS)
Gas Tungsten Arc Welding followed by Shielded
Metal Arc Welding of Chromium-Molybdenum Steel
(M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded
Condition, 1/8 through 1-1/2 in. Thick, PWHT
Condition, ER90S-B3 and E9018-B3, Primarily
Pipe Applications
ANSI/AWS B2.1-5A-225-1999 标准焊接程序规范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-5A或P-5A)1/
Standard Welding Procedure Specification (WPS)for
Gas Tungsten Arc Welding (Consumable Insert
Root) of Chromium-Molybdenum Steel (M-5A/P-5A),
1/8 through 1/2 in. Thick, As-Welded Condition,
1/8 through 3/4 in. Thick, PWHT Condition, IN521
and ER90S-B3, Primarily Pipe Applications
ANSI/AWS B2.1-5A-226-1999 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding (Consumable Insert
Root) followed by Shielded Metal Arc Welding
of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8
through 1/2 in. Thick, As-Welded Condition,
1/8 through 1-1/2 in. Thick, PWHT Condition,
IN521, ER90S-B3, and E9018-B3, Primarily Pipe
Applications
ANSI/AWS B2.1-8-005-2002 在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8或P-8)的气体保护金属极电弧焊
Gas Metal Arc Welding of Austentic Stainless
Steel (M-8 or P-8) 10 through 18 Gage, in the
as-Welded Condition, with or without Backing
ANSI/AWS B2.1-8-009-2002 在焊接条件下、有或没有垫板、10到18规格的不锈钢(M-8或P-8)的钨电极惰性气体保护焊
Gas Tungsten Arc Welding of Stainless Steel
(M-8 or P-8), 10 through 18 Gage, in the as-Welded
Condition, with or without Backing
ANSI/AWS B2.1-8-013-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8/P-8)的保护金属电弧焊
Standard Welding Procedure Specification – Shielded
Metal Arc Welding of Austenitic – Stainless
Steel (M-8/P-8), 10 through 18 Gage, in the
as-Welded Condition, with or without Backing
ANSI/AWS B2.1-8-023-2005 在焊接条件下1/8到1-1/2英尺厚奥氏体不锈钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-8/P-8/S-8,1组)
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Austenitic
Stainless Steel (M-8/P-8/S-8, Group 1), 1/8
through 1-1/2 inch Thick, As-Welded Condition
ANSI/AWS B2.1-8-024-2001 在焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的焊接程序规范(WP
Welding Procedure Specification (WPS) for Gas
Tungsten Arc Welding of Austenitic Stainless
Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2
inch thick, As-Welded Condition
ANSI/AWS B2.1-8-025-2001 在焊接条件下、保护金属电弧焊之后的1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保
Welding Procedure Specification (WPS) for Gas
Tungsten Arc Welding followed by Shielded Metal
Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8,
Group 1) 1/8 through 1-1/2 inch thick, As-Welded
Condition
ANSI/AWS B2.1-8-212-2001 主要用于管道的、在ERXX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding of Austenitic Stainless
Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2
inch Thick ERXX, As-Welded Condition, Primarily
Pipe Applications
ANSI/AWS B2.1-8-213-1997 主要用于管道的、在焊接条件下(M-8/P-8/S-8,组)1/8到1-1/2英寸E3XX-XX奥氏体不锈钢的药皮焊条电弧焊的标准
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Austenitic
Stainless Steel (M-8/P-8/S-8, Group), 1/8 through
1-1/2 inch Thick E3XX-XX, As-Welded Condition,
Primarily Pipe Applications
ANSI/AWS B2.1-8-214-2001 标准焊接程序规范(WPS).主要用于管道的,在焊接条件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奥氏体不锈钢(M-8/P
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding Followed by Shielded
Metal Arc Welding of Austenitic Stainless Steel
(M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch
Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily
Pipe Applications
ANSI/AWS B2.1-8-215-2001 在 IN3XX和ER3XX焊接条件下、1/8到1-1/2英寸厚的自耗嵌入式奥氏体不锈钢(M-8/P-8/S-8,组1)钨电极惰性气体保
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding, with Consumable
Insert of Austenitic Stainless Steel (M-8/P-8/S-8,
Group 1) 1/8 through 1-1/2 Inch Thick IN3XX
and ER3XX, As-Welded Condition
ANSI/AWS B2.1-8-216-2001 标准焊接程序规范(WPS).焊接用,
1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奥氏体不锈钢(M-8/P-8/S-8,组1)的
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding, with Consumable
Insert Followed by Shielded Metal Arc Welding
of Austenitic Stainless Steel (M-8/P-8/S-8,
Group 1) 1/8 through 1-1/2 inch Thick IN3XX,
ER3XX, and E3XX-XX, As-Welded Condition
ANSI/AWS B2.1.22-015-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格铝(M-22或P-22)的钨电极惰性气体保护焊
Standard Welding Procedure Specification – Gas
Tungsten Arc Welding of Aluminum (M-22 or P-22),
10 through 18 Gage, in the as-Welded Condition,
with or without Backing
ANSI/AWS B2.1/B 2.1M-2008 焊接工艺和性能认证用规范 Specification
for Welding Procedure and Performance Qualification
ANSI/AWS B2.3-2007 软钎焊接方法和性能合格规范 Specification
for Soldering Procedure and Performance Qualification
ANSI/AWS B2.4-2006 焊接工艺和热塑性塑料性能认证的规范 Specification
for Welding Procedure and Performance Qualification
for Thermoplastics
ANSI/AWS B5.1-2003 焊接检验员的资格认证规范 Specification
for the Qualification of Welding Inspectors
ANSI/AWS B5.14-2009 焊接销售代表资质鉴定规范 Specification
for the Qualification of Welding Sales Representatives
ANSI/AWS B5.16-2006 焊接工程师资格认可规范 Specification
for the Qualification of Welding Engineers
ANSI/AWS B5.17-2008 焊接加工人员资格鉴定用规范 Specification
for the Qualification of Welding Fabricators
ANSI/AWS B5.2-2001 焊接检验专业人员和焊接检验助理人员资质规范 Specification
for the Qualification of Welding Inspector Specialists
and Welding Inspector Assistants
ANSI/AWS B5.5-2000 焊接教员的资格认定 Specification for
the Qualification of Welding Educators
ANSI/AWS B5.9-2006 焊接监理资质规范 Specification for
the Qualification of Welding Supervisor
ANSI/AWS C1.1M/C 1.1-2000 电阻焊接推荐惯例 Recommended
Practices for Resistance Welding
ANSI/AWS C1.4M/C 1.4-2009 碳钢和低合金钢的电阻焊接规范 Specification
for Resistance Welding of Carbon and Low-Alloy
Steels
ANSI/AWS C1.5-2008 电阻焊接技术员认证规范 Specification
for the Qualification of Resistance Welding
Technician
ANSI/AWS C3.2M/C 3.2-2008 评定硬钎焊接头强度的标准方法 Standard
Methods for Evaluating the Strength of Brazed
Joints
ANSI/AWS C3.8M/C 3.8-2005 黄铜焊接缝的超声检验推荐实施规程 Recommended
Practices for the Ultrasonic Examination of
Brazed Joints
ANSI/AWS C5.10/C 5.10M-2003 焊接和等离子体电弧切割用保护气的推荐规程
Recommended Practices for Shielding Gases for
Welding and Plasma Arc Cutting
ANSI/AWS C6.1-2009 摩擦焊接的推荐实施规程 Recommended Practices
for Friction Welding
ANSI/AWS C6.2/C 6.2M-2006 金属焊接摩擦的合格和规范 Specification
for Qualification of Friction Welding of Metals
ANSI/AWS C7.1-1992 电子束焊接的推荐实施规程 Recommended
Practices for Electron Beam Welding
ANSI/AWS C7.3-1999 电子束焊接工艺规范 Process Specification
for Electron Beam Welding
ANSI/AWS C7.4/C 7.4M-2008 激光束焊接操作人员资格鉴定的程序规范
Process Specification and Operator Qualification
for Laser Beam Welding
ANSI/AWS D1.1/D 1.1M-2010 结构焊接代码.钢 Structural
Welding Code - Steel
ANSI/AWS D1.2/D 1.2M-2008 结构焊接规则.铝 Structural
Welding Code - Aluminum
ANSI/AWS D1.3/D 1.3M-2007 结构焊接规则.薄钢板 Structural
Welding Code - Sheet Steel
ANSI/AWS D1.4-1997 增强钢结构焊接规程 Structural Welding
Code - Reinforcing Steel
ANSI/AWS D1.4/D 1.4M-2005 结构焊接规范.钢筋 Structural
Welding Code - Reinforcing Steel
ANSI/AWS D1.5M/D 1.5-2007 桥梁焊接规则 Bridge Welding
Code
ANSI/AWS D1.6-2007 钢结构焊接规范.不锈钢 Structural Welding
Code - Stainless Steel
ANSI/AWS D1.8/D 1.8M-2009 结构焊接规范.地震增补 Structural
Welding Code - Seismic Supplement
ANSI/AWS D1.9/D 1.9M-2007 结构焊接代码.钛 Structural
Welding Code - Titanium
ANSI/AWS D10.11M/D 10.11-2007 焊接无背衬管的根部焊道指南
Guide for Root Pass Welding of Pipe Without
Backing
ANSI/AWS D10.12M/D 10.12-2000 焊接低碳钢管指南 Guide
for Welding Mild Steel Pipe
ANSI/AWS D10.18M/D 10.18-2008 铁素体/奥氏体双相不锈钢管和管道的焊接指南
Guide for Welding Ferritic/Austenitic Duplex
Stainless Steel Piping and Tubing
ANSI/AWS D10.4-1986 焊接奥氏体铬镍不锈钢管推荐惯例 Welding
Austenitic Chromium-Nickel Stainless Steel Piping
and Tubing, Recommended Practices for
ANSI/AWS D11.2-2006 铁铸件焊接指南 Guide for Welding
Iron Castings
ANSI/AWS D14.1/D 14.1M-2005 工业和工厂用起重机及其它物料运输设备的焊接规范
Specification for Welding of Industrial and
Mill Cranes and Other Material Handling Equipment
ANSI/AWS D14.3/D 14.3M-2005 焊接、土方、建筑和农业设备的规范
Specification for Welding, Earthmoving, Construction,
and Agricultural Equipment
ANSI/AWS D14.4/D 14.4M-2005 机械和设备焊接接头规范 Specification
for Welded Joints in Machinery and Equipment
ANSI/AWS D14.5/D 14.5M-2009 压力机和压力元件焊接规范 Specification
for Welding of Presses and Press Components
ANSI/AWS D14.6-2004 设备的旋转元件的焊接规范 Specification
for Welding of Rotating Elements of Equipment
ANSI/AWS D15.1/D 15.1M-2007 汽车和机车用铁路焊接规范 Railroad
Welding Specification for Cars and Locomotives
ANSI/AWS D15.2-2003 铁路车辆用轨道和相关轨道元件焊接的推荐实施规范
Recommended Practices for the Welding of Rails
and Related Rail Components for Use by Rail
Vehicles
ANSI/AWS D16.1M/D 16-2004 机器人电弧焊接安全规范 Specification
for Robotic Arc Welding Safety
ANSI/AWS D16.1M/D 16.1-2004 机器人电弧焊接安全规范 Specification
for Robotic Arc Welding Safety
ANSI/AWS D16.2M/D 16.2-2007 机器人和自动焊接的元部件 Components
of Robotic and Automatic Welding
ANSI/AWS D16.3M/D 16.3-2008 机器人焊接用风险评估指南 Risk
Assessment Guide for Robotic Welding
ANSI/AWS D17.2/D 17.2M-2007 航空航天用点和缝电阻焊接的规范
Specification for Aerospace Spot and Seam Resistance
Welding
ANSI/AWS D18.1/D 18.1M-2009 卫生设施中管和管道系统焊接规范
Specification for Welding of Tube and Pipe Systems
in Sanitary (Hygienic) Applications
ANSI/AWS D18.3/D 18.3M-2005 卫生用途的槽罐、容器和其他设备的焊接规范
Specification for Welding of Tanks, Vessels,
and Other Equipment in Sanitary (Hygienic) Applications
ANSI/AWS D3.5-1993 钢船壳结构焊接指南 Steel Hull Welding,
Guide for
ANSI/AWS D3.6M-1999 水下焊接 Underwater Welding
ANSI/AWS D3.7-2004 铝制船体焊接指南 Guide for Aluminum
Hull Welding
ANSI/AWS D3.9-2010 经过油漆底漆的焊接点分类用规范 Specification
for Classification of Weld-Through Paint Primers
ANSI/AWS D8.14M-2008 自动焊接质量规范.铝弧焊 Specification
for Automotive Weld Quality - Arc Welding of
Aluminum
ANSI/AWS D8.1M-2007 汽车的焊接质量规范.钢的接触点焊 Specification
for Automotive Weld Quality - Resistance Spot
Welding of Steel
ANSI/AWS D8.7-2004 汽车焊接质量的推荐实施规程.电阻点焊 Recommended
Practice for Automotive Weld Quality – Resistance
Spot Welding
ANSI/AWS D9.1M/D 9.1-2006 金属薄板焊接代码 Sheet Metal
Welding Code
ANSI/AWS F1.1M-2006 焊接和有关工艺过程产生的悬浮颗粒的取样方法 Method
for Sampling Airborne Particulates Generated
by Welding and Allied Processes
ANSI/AWS F1.2-2006 焊接和有关工艺中测量烟雾形成速度和总烟雾排放量的实验室方法
Laboratory Method for Measuring Fume Generation
Rates and Total Fume Emission of Welding and
Allied Processes
ANSI/AWS F1.3M-2006 焊接环境污染评定的取样方法指南 A Sample
Strategy Guide for Evaluating Contaminants in
the Welding Environment
ANSI/AWS F1.5M-2003 焊接和类似工艺用的气体取样和分析方法 Sampling
and Analyzing Gases from Welding and Allied
Processes, Methods for
ANSI/AWS F1.6-2003 环境保护局(EPA)评价焊接排放物的指南和通风许可报告
Guide for Estimating Welding Emissions for EPA
and Ventilation Permit Reporting
ANSI/AWS F2.3M-2001 透明焊接帘门和帘幕的使用和性能规范 Specification
for Use and Performance of Transparent Welding
Curtains and Screens
ANSI/AWS F3.2M/F 3.2-2001 焊接烟尘通风指南 Ventilation
Guide for Weld Fume
ANSI/AWS F4.1-2007 容器和管道焊接和切割准备的推荐安全规程 Recommended
Safe Practices for the Preparation for Welding
and Cutting of Containers and Piping
ANSI/AWS G1.2M/G 1.2-1999 热塑性塑料标准化超声焊接试件规范 Specification
for Standardized Ultrasonic Welding Test Specimen
for Thermoplastics
ANSI/AWS G1.6-2006 热气焊挤压和加热工具对塑料焊接检验师资格规范 Specification
for the Qualification of Plastics Welding Inspectors
for Hot Gas Extrusion, and Heated Tool Blutt
Thermoplastic Welds
ANSI/AWWA D100-2005 储水用碳素钢焊接箱 Welded Carbon
Steel Tanks for Water Storage
ANSI/CEMA 501.1-2003 焊接钢翼轮规范 Specifications
for Welded Steel Wing Pulleys
ANSI/CEMA B105.1-2009 焊接钢传输滑轮 Welded Steel Conveyor
Pulleys
ANSI/EIA 448-19A-2000 机电元件的试验标准.用气相系统法确立机械焊接的环境效应
Test Standard for Electromechanical Components
- Environmental Effects of Machine Soldering
Using a Vapor Phase System
ANSI/EIA 448-21A-2000 机电元件的试验标准.开关.用红外系统法确定机械焊接的交替环境效应
Test Standard for Electromechanical Components
- Switch Environmental Effects of Machine Soldering
Using an Infrared System
ANSI/EIA 448-22-1990 耐焊接热的焊接试验方法 Resistance
to Soldering Heat, Soldering Method
ANSI/EIA 448-2A-2000 机电元件的试验标准.机械焊接的环境效应 Test
Standard for Electromechanical Components Environmental
Effects of Machine Soldering
ANSI/EIA 638-1995 表面的可焊接性试验 Surface Mount Solderability
Test
ANSI/EIA 654-2000 电线和电气元件耐焊接热试验程序 Resistance
to Soldering Heat Test Procedure for Wire and
Electrical Components
ANSI/EIA-364-47A-2001 非焊接缠绕的电连接器用导体非缠绕试验程序 Conductor
Unwrap Test Procedure for Solderless Wrapped
Electrical Contacts
ANSI/EIA-654-2000 电线和电器元件耐焊接热试验程序 Resistance
to Soldering Heat Test Procedure for Wire and
Electrical Components
ANSI/FM 4950-2007 热加工用焊接垫、焊接毯和焊接护帘 Welding Pads,
Welding Blankets and Welding Curtains for Hot
Work Operations
ANSI/IPC J-STD-001D-2005 焊接的电气和电子组件的要求 Requirements
for Soldered Electrical and Electronic Assemblies
ANSI/ISA 75.08.03-2001 承插焊接端和螺旋端球型控制阀的端面间尺寸(ANSI类型150、300、600、900、1500和2500)
Face-to-Face Dimensions for Socket Weld-End
and Screwed-End Globe-Style Control Valves (ANSI
Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA S75.08.03-2001 承插焊接端头和螺旋端头球状控制阀的面到面尺寸
Face-to-Face Dimensions for Socket Weld-End
and Screwed-End Globe-Style Control Valves (ANSI
Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/NAAMM MBG533-2009 钢,铝预制件和不锈钢棒格栅的焊接标准 Welding
Standard for Fabrication of Steel, Aluminum,
and Stainless Steel Bar Grating
ANSI/NFPA 51-2006 焊接、切割和相关工艺用氧燃料气系统的设计和安装用标准
Standard for the Design and Installation of
Oxygen-Fuel Gas Systems for Welding, Cutting,
and Allied Processes
ANSI/NFPA 51B-2009 焊接、切削和其它热加工防火标准 Standard
for Fire Prevention During Welding, Cutting,
and Other Hot Work
ASME B16.11-2001 锻制承插焊接和螺纹配件 (Forged fittings,
socket-welding and threaded)
ASME B16.34-1996 阀门.法兰、螺纹和焊接端 (Valves - Flanged,
threaded, and welding end)
ASME B16.34a Addenda-1998 带螺纹的法兰式阀门和焊接端.附录 (Valves
- Flanged, threaded, and welding end; Addenda)
ASME B29.16M-1995 焊接钢型碾磨机链、附件和链轮齿 (Welded steel
type mill chains, attachments, and sprocket
teeth)
ASME B29.18M-1993 焊接钢型牵引链、附件和链轮齿 (Welded steel-type
drag chains, attachments, and sprocket teeth)
ASME B29.21M-1996 水、污水处理设备用700级焊接钢和铸造链,附件及链轮
(700 class welded steel and cast chains, attachments
and sprockets for water and sewage treatment
plants)
ASME BPVC Section 9-2001 ASME锅炉和压力容器规则.第9节:焊接和钎焊合格
(ASME Boiler & Pressure Vessel Code - Section
9: Welding and Brazing Qualifications)
ASTM A1012-2002(2007) 无缝和焊接铁素体、奥氏体和双合金钢冷凝器和带整体散热片的热交换器管的标准规范
Standard Specification for Seamless and Welded
Ferritic, Austenitic and Duplex Alloy Steel
Condenser and Heat Exchanger Tubes With Integral
Fins
ASTM A1064/A1064M-2009 钢丝绳和焊接线缆加固的技术标准规范,混凝土的平整和变形
Standard Specification for Steel Wire and Welded
Wire Reinforcement, Plain and Deformed, for
Concrete
ASTM A185/A185M-2007 混凝土用普通焊接钢丝网标准规范 Standard
Specification for Steel Welded Wire Reinforcement,
Plain, for Concrete
ASTM A214/A214M-1996(2005) 热交换器和冷凝器用电阻焊接碳钢管的标准规范
Standard Specification for Electric-Resistance-Welded
Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A249/A249M-2010 焊接奥氏体钢锅炉、过热器、热交换器和冷凝器管的标准规范
Standard Specification for Welded Austenitic
Steel Boiler, Superheater, Heat-Exchanger, and
Condenser Tubes
ASTM A268/A268M-2010 一般用途的无缝和焊接铁素体与马氏体不锈钢管标准规范
Standard Specification for Seamless and Welded
Ferritic and Martensitic Stainless Steel Tubing
for General Service
ASTM A269-2010 通用无缝和焊接奥氏体不锈钢管标准规范 Standard Specification
for Seamless and Welded Austenitic Stainless
Steel Tubing for General Service
ASTM A270/A270M-2010 卫生设施用无缝钢和焊接奥氏体不锈钢管的标准规范
Standard Specification for Seamless and Welded
Austenitic Stainless Steel Sanitary Tubing
ASTM A312/A312M-2009 无缝焊接重冷处理奥氏体不锈钢管标准规范 Standard
Specification for Seamless, Welded, and Heavily
Cold Worked Austenitic Stainless Steel Pipes
ASTM A333/A333M-2010 低温设备用无缝和焊接钢管的标准规范 Standard
Specification for Seamless and Welded Steel
Pipe for Low-Temperature Service
ASTM A409/A409M-2009 腐蚀性或高温条件用焊接大直径奥氏体钢管标准规范
Standard Specification for Welded Large Diameter
Austenitic Steel Pipe for Corrosive or High-Temperature
Service
ASTM A423/A423M-2009 无缝和电焊接低合金钢管的标准规范 Standard
Specification for Seamless and Electric-Welded
Low-Alloy Steel Tubes
ASTM A488/A488M-2010 钢铸件焊接规程和工作人员的合格鉴定的标准规程
Standard Practice for Steel Castings, Welding,
Qualifications of Procedures and Personnel
ASTM A498-2006 带整体散热片的无缝焊接碳钢热交换管的标准规范 Standard
Specification for Seamless and Welded Carbon
Steel Heat-Exchanger Tubes with Integral Fins
ASTM A500/A500M-2010 圆形与异型冷成型焊接与无缝碳素钢结构管标准规范
Standard Specification for Cold-Formed Welded
and Seamless Carbon Steel Structural Tubing
in Rounds and Shapes
ASTM A501-2007 热成型焊接与无缝碳素钢结构管的标准规范 Standard
Specification for Hot-Formed Welded and Seamless
Carbon Steel Structural Tubing
ASTM A53/A53M-2007 无缝焊接、含锌涂层、黑色热浸镀钢管标准规范 Standard
Specification for Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated, Welded and Seamless
ASTM A554-2010 焊接的不锈钢机械管用标准规范 Standard Specification
for Welded Stainless Steel Mechanical Tubing
ASTM A688/A688M-2010 焊接奥氏体不锈钢给水加热器管用标准规范 Standard
Specification for Welded Austenitic Stainless
Steel Feedwater Heater Tubes
ASTM A724/A724M-2009 制作焊接层压容器用淬火加回火的碳锰硅压力容器钢板的标准规范
Standard Specification for Pressure Vessel Plates,
Carbon-Manganese-Silicon Steel, Quenched and
Tempered, for Welded Layered Pressure Vessels
ASTM A758/A758M-2009 改良缺口韧性的锻造碳钢柄焊接管配件的标准规范
Standard Specification for Wrought-Carbon Steel
Butt-Welding Piping Fittings with Improved Notch
Toughness
ASTM A774/A774M-2009 低温和中等温度条件下的一般腐蚀性服务用焊接锻造奥氏体不锈钢配件标准规范
Standard Specification for As-Welded Wrought
Austenitic Stainless Steel Fittings for General
Corrosive Service at Low and Moderate Temperatures
ASTM A790/A790M-2009a 无缝与焊接铁素体/奥氏体不锈钢管的标准规范
Standard Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Pipe
ASTM A803/A803M-2010 焊接铁素体不锈钢给水加热器管用标准规范 Standard
Specification for Welded Ferritic Stainless
Steel Feedwater Heater Tubes
ASTM A813/A813M-2009 单或双焊接奥氏体不锈钢管的标准规范 Standard
Specification for Single- or Double-Welded Austenitic
Stainless Steel Pipe
ASTM A860/A860M-2009 锻造的高强度低合金钢焊接柄接的标准规范 Standard
Specification for Wrought High-Strength Low-Alloy
Steel Butt-Welding Fittings
ASTM A865/A865M-2006 钢管连接用黑色或镀锌(电镀)焊接或无缝钢螺纹接头标准规范
Standard Specification for Threaded Couplings,
Steel, Black or Zinc-Coated (Galvanized) Welded
or Seamless, for Use in Steel Pipe Joints
ASTM A933/A933M-2007 加固用乙烯基(PVC)镀层钢丝和焊接钢丝网的标准规范
Standard Specification for Vinyl (PVC) Coated
Steel Wire and Welded Wire Fabric for Reinforcement
ASTM A952/A952M-2002(2010) 锻造80级和100级钢提升组件和焊接附件链接件用标准规范
Standard Specification for Forged Grade 80 and
Grade 100 Steel Lifting Components and Welded
Attachment Links
ASTM B338-2010 冷凝器和热交换器用无缝和焊接钛及钛合金管标准规范 Standard
Specification for Seamless and Welded Titanium
and Titanium Alloy Tubes for Condensers and
Heat Exchangers
ASTM B353-2007 核设施(核燃料覆层除外)用锻制锆及锆合金无缝与焊接管的标准规范
Standard Specification for Wrought Zirconium
and Zirconium Alloy Seamless and Welded Tubes
for Nuclear Service (Except Nuclear Fuel Cladding)
ASTM B363-2006a 无缝和焊接的非合金钛及钛合金焊接配件标准规范 Standard
Specification for Seamless and Welded Unalloyed
Titanium and Titanium Alloy Welding Fittings
ASTM B447-2007 焊接铜管的标准规范 Standard Specification
for Welded Copper Tube
ASTM B521-1998(2004) 钽和钽合金无缝和焊接管标准规范 Standard
Specification for Tantalum and Tantalum Alloy
Seamless and Welded Tubes
ASTM B608-2007 焊接铜合金管的标准规范 Standard Specification
for Welded Copper-Alloy Pipe
ASTM B619-2006 焊接的镍和镍钴合金管的标准规范 Standard Specification
for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B626-2006 焊接镍和镍钴合金管标准规范 Standard Specification
for Welded Nickel and Nickel-Cobalt Alloy Tube
ASTM B640-2007 空调及制冷设备用焊接铜管标准规范 Standard Specification
for Welded Copper Tube for Air Conditioning
and Refrigeration Service
ASTM B673-2005e1 UNS N08925、UNS N08354和UNS N08926焊接管的标准规范
Standard Specification for UNS N08925, UNS N08354,
and UNS N08926 Welded Pipe
ASTM B674-2005 UNS N08925、UNS N08354和UNS N08926焊接管的标准规范
Standard Specification for UNS N08925, UNS N08354,
and UNS N08926 Welded Tube
ASTM B675-2002(2007) UNS NO8367焊接管标准规范 Standard
Specification for UNS N08367 Welded Pipe
ASTM B726-2002(2006) 镍铬钼钴钨铁硅合金(UNS N06333)焊接管的标准规范
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon
Alloy (UNS N06333) Welded Tube
ASTM B757-2000(2006) 镍铬钼钨合金焊接管标准规范 Standard
Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys
(UNS N06110) Welded Pipe
ASTM B758-2000(2006) 镍铬钼钨合金焊接管标准规范 Standard
Specification for Nickel-Chromium-Molybdenum-Tungsten
Alloys (UNS N06110) Welded Tube
ASTM B804-2002(2007) UNS N08367和UNS N08926焊接管标准规范
Standard Specification for UNS N08367 and UNS
N08926 Welded Pipe
ASTM B891-1998(2004) 带集成散热片的无缝和焊接钛及钛合金冷凝器和热交换器管的标准规范
Standard Specification for Seamless and Welded
Titanium and Titanium Alloy Condenser and Heat
Exchanger Tubes With Integral Fins
ASTM B919-2001(2006) 内部增强的焊接铜热交换器管标准规范 Standard
Specification for Welded Copper Heat Exchanger
Tubes With Internal Enhancement
ASTM B924-2002(2006) 具有整体散热叶片的冷凝器及热交换器用无缝及焊接镍合金管标准规范
Standard Specification for Seamless and Welded
Nickel Alloy Condenser and Heat Exchanger Tubes
With Integral Fins
ASTM B944-2006 铜铍焊接热交换器和冷凝管标准规范(UNS No. C17510)
Standard Specification for Copper-Beryllium
Welded Heat Exchanger and Condenser Tube (UNS
No. C17510)
ASTM B956-2010 带集成散热片的焊接铜和铜合金冷凝器及热交换器管件的标准规范
Standard Specification for Welded Copper and
Copper-Alloy Condenser and Heat Exchanger Tubes
with Integral Fins
ASTM C1147-2001(2006) 耐化学腐蚀热塑(性)塑料的短期拉伸焊接强度测定的标准实施规程
Standard Practice for Determining the Short
Term Tensile Weld Strength of Chemical-Resistant
Thermoplastics
ASTM E1032-2006 焊接件射线检验的标准试验方法 Standard Test
Method for Radiographic Examination of Weldments
ASTM E1648-1995(2006) 用于检验焊接中铝的标准参考射线照片 Standard
Reference Radiographs for Examination of Aluminum
Fusion Welds
ASTM E749-2007 连续焊接时声排放监控的标准实施规程 Standard Practice
for Acoustic Emission Monitoring During Continuous
Welding
ASTM F1145-2005 型锻、焊接、锻制松紧螺纹扣的标准规范 Standard
Specification for Turnbuckles, Swaged, Welded,
Forged
ASTM F2527-2005e1 外科植入物用锻造无缝和焊接及拉制的钴合金小直径管的标准规范（UNS
R30003、 UNS R30008、 UNS R30035、 U Standard Specification
for Wrought Seamless and Welded and Drawn Cobalt
Alloy Small Diameter Tubing for Surgical Implants
(UNS R30003, UNS R30008, UNS R30035, UNS R30605,
and UNS R31537)
ASTM F256-2005e1 含有18%或26%铬的铬铁焊接用合金的标准规范 Standard
Specification for Chromium-Iron Sealing Alloys
with 18 or 28 Percent Chromium
ASTM F31-2005 42%镍6%铬铁焊接用合金的标准规范 Standard Specification
for 42% Nickel-6% Chromium-Iron Sealing Alloy
IEEE 1584-2002 电弧闪光焊接危害计算执行指南 (Guide for performing
arc-flash hazard calculations)
英国焊接标准(BS welding standards)
--------------------------------------------------------------------------------
编号 中文名称 英文名称
BS 1722-10-2006 栅栏.链节和焊接筛网的防盗栅栏用规范 Fences -
Specification for anti-intruder fences in chain
link and welded mesh
BS 1894-1992 焊接结构的电热锅炉的设计和制造规范 Specification
for design and manufacture of electric boilers
of welded construction
BS 2790-1992 焊接结构的壳式锅炉的设计和制造规范 Specification
for design and manufacture of shell boilers
of welded construction
BS 2S 510-1970 碳钢薄板和带材规范(430/540 MPa)(适用于焊接)
Specification for carbon steel sheet and strip
(430/540 MPa) (suitable for welding)
BS 2S 511-1970 深拉碳钢薄钢板和带材的规范(280/400 MPa)(适用于焊接)
Specification for deep drawing carbon steel
sheet and strip (280/400 MPa) (suitable for
welding)
BS 2S 514-1969 碳锰钢薄板和带材规范(淬火和回火条件:77/100MPa)(适用于焊接)
Specification for carbon-manganese steel sheet
and strip (for use in the hardened and tempered
condition: 770/1000 MPa) (suitable for welding)
BS 2S 515-1969 碳锰钢薄板和带材规范(退火的)(退火条件:46/59MPa)(适用于焊接)
Specification for carbon-manganese steel sheet
and strip (softened) (for use in the softened
condition: 460/600 MPa) (suitable for welding)
BS 2S 92-1964 飞机材料规范.碳锰钢(适用于焊接)(40/55吨力/平方英寸;限定等圆断面4英寸)
Specification for aircraft material - Carbon-manganese
steel (suitable for welding) (40/55 tonf/sq
in: limiting ruling section 4 in)
BS 2T 66-1980 19/10铬-镍耐腐蚀钢管材规范(铌稳定的:550MPa)(可焊接)
Specification for 18/10 chromium-nickel corrosion-resisting
steel tube (niobium stabilized: 550 MPa) (weldable)
BS 2T 68-1980 冷拉18/10铬-镍耐腐蚀钢管材规范(铌稳定的:800MPa)(可焊接)
Specification for cold drawn 18/10 chromium-nickel
corrosion-resisting steel tube (niobium stabilized:
800 MPa) (weldable)
BS 3604-2-1991 承压钢管.具有规定高温特性的铁合金钢.第2部分:纵向电弧焊接管规范
Steel pipes and tubes for pressure purposes:
ferritic alloy steel with specified elevated
temperature properties - Specification for longitudinally
arc welded tubes
BS 3799-1974 石油工业用钢管配件、螺旋管接头和套管焊接规范 Specification
for steel pipe fittings, screwed and socket-welding
for the petroleum industry
BS 3T 53-1980 铬-钼钢管材规范(700MPa)(管外径不小于12.5mm)(可焊接)
Specification for chromium-molybdenum steel
tube (700 MPa) (outside diameter not less than
12.5 mm) (weldable)
BS 4129-1990 板材钢电阻焊用焊接底剂、焊透密封剂、粘合剂和蜡规范 Specification
for welding primers and weld-through sealants,
adhesives and waxes for resistance welding of
sheet steel
BS 4449-2005+A2-2009 混凝土增强钢.可焊接增强钢.棒材、卷材和拆卷产品.规范
Steel for the reinforcement of concrete - Weldable
reinforcing steel - Bar, coil and decoiled product
- Specification
BS 4515-1-2009 陆地和近海钢管焊接规范.碳和碳锰钢管 Specification
for welding ofsteel pipelines on land andoffshorePart
1: Carbon and carbon manganesesteel pipelines
BS 4515-2-1999 陆地和近海铺设的钢管焊接规范.双联法不锈钢管道 Specification
for welding of steel pipelines on land and offshore
- Duplex stainless steel pipelines
BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头间电弧焊
Specification for approval testing of welders
working to approved welding procedures - Arc
welding of tube to tube-plate joints in metallic
materials
BS 4872-1-1982 不要求批准焊接程序的焊工考试规范.第1部分:钢熔焊 Specification
for approval testing of welders when welding
procedure approval is not required - Fusion
welding of steel
BS 4872-2-1976 不要求批准焊接工艺时焊工的鉴定考试规范.第2部分:铝及铝合金钨极惰性气体保护电弧焊或熔化极惰性气体保护
Specification for approval testing of welders
when welding procedure approval is not required
- TIG or MIG welding of aluminium and its alloys
BS 499-1 Supplement-1992 焊接术语与符号.补充.电焊设备的定义
Welding terms and symbols - Supplement - Definitions
for electric welding equipment
BS 499-1-2009 焊接术语和符号.焊接、钎焊和热切割用术语表 Welding
terms and symbolsPart 1: Glossary for welding,
brazing andthermal cutting
BS 499-2C-1999 焊接术语与符号.图表形式的的欧洲电弧焊符号 Welding
terms and symbols - European arc welding symbols
in chart form
BS 4T 45-1972 碳-锰钢管材规格(700 N/mm<上标2>)(管外径大于或等于12.5mm)(可焊接)
Specification for carbon-manganese steel tube
(700 N/mm2) (tube 12.5 mm outside diameter and
greater) (weldable)
BS 5950-2-2001 建筑物中结构用的钢制件.材料、制造和装配规范.轧制及焊接型材
Structural use of steelwork in building - Specification
for materials, fabrication and erection - Rolled
and welded sections
BS 5S 21-1964 飞机材料规范.20号碳钢(适用于焊接)(25/35吨力/平方英寸:最大直径或最小断面尺寸6英寸)
Specification for aircraft material - '20' carbon
steel (suitable for welding) (25/35 tonf/sq
in: maximum size 6 inches diameter or minor
sectional dimension)
BS 638-4-1996 电弧焊电源、设备和附件.第4部分:焊接电缆规范 Arc welding
power sources, equipment and accessories - Specification
for welding cables
BS 6942-2-1989 氧燃料气体焊接和相关工艺用成套小型工具的设计和建造.第2部分:使用可充氧气和燃气容器的成套工具规范
Design and construction of small kits for oxy-fuel
gas welding and allied processes - Specification
for kits using refillable gas containers for
oxygen and fuel gas
BS 6990-1989 含有工艺流体或其残留物的钢管焊接实用规程 Code of practice
for welding on steel pipes containing process
fluids or their residuals
BS 7122-1989 液化气体道路运输用的焊接钢槽车规范 Specification
for welded steel tanks for the road transport
of liquefiable gases
BS 7363-1990 焊接用受控热强度试验和叠珠焊缝板试验方法 Method for
bead-on-plate (BOP) test for welds
BS 7372-3-1993 工业金属丝筛网和金属丝编织布孔径和丝径组合选择指南.第3部分:预压接或压力焊接金属丝筛网的优选组合
Guide to the choice of aperture size and wire
diameter combinations for industrial wire screens
and woven wire cloth - Preferred combinations
for pre-crimped or pressure-welded wire screens
BS 7448-2-1997 断裂机械韧性试验.第2部分:金属材料焊接的KDOWNIDOWNc值、临界CTOD值和临界J值的测定方法
Fracture mechanics toughness tests - Method
for determination of KIc, critical CTOD and
critical J values of welds in metallic materials
BS 7655-2.4-2000 电缆用绝缘和铠装材料规范.横向耦合弹性铠装化合物.焊接电缆包敷物
Specification for insulating and sheathing materials
for cables - Cross-linked elastomeric sheathing
compounds - Welding cable covering
BS 7670-2-1997 电阻凸焊的钢螺母和螺栓.焊接螺母和螺栓的焊接规范 Steel
nuts and bolts for resistance projection welding
- Specification for welding of weld nuts and
weld bolts
BS 8451-2004 气焊切割和相关工艺用橡胶软管.高度耐扭结重型焊接软管(H型).规范
Rubber hoses for gas welding, cutting and allied
processes - High kink-resistant heavy duty welding
hose (type H) - Specification
BS 855-1990 集中供热和间接热水供应用焊接钢锅炉(额定输出44KW至3MW)规范
Specification for welded steel boilers for central
heating and indirect hot water supply (rated
output 44 kW to 3 MW)
BS 91-1998 电缆焊接插座.规范 Electric cable soldering
sockets - Specification
BS 9210 N0009-1-1978 射频连接器(SMC系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.全面评定级
Detail specification for radio frequency connectors
(series SMC) - Unsealed, soldered, captive contact,
50 $2I, screw coupling - Full assessment level
BS 9210 N0009-2-1978 射频连接器(SMA系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.控制图.配合面详图和测量数据
Detail specification for radio frequency connectors
(series SMC) - Unsealed, soldered, captive contact,
50 ohms, screw coupling - Control drawings -
Mating face details and gauge information
BS 9210 N001-1-1975 射频连接器(BNC型)的详细规范.50Ω的密封、焊接、静态接触.全面评定级
Detail specification for radio frequency connectors
(type BNC) - Sealed, soldered, captive contact,
50 ohms - Full assessment level
BS 9210 N007-1-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50Ω、插入式连接.全面评定级
Detail specification for radio frequency connectors
(type SMB) - Unsealed, soldered, captive contact,
50 $2I, snap-on couplings - Full assessment
level
BS 9210 N007-2-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50Ω、连接扣.控制图.配合面详图和测量数据
Detail specification for radio frequency connectors
(type SMB) - Unsealed, soldered, captive contact,
50 ohms, snap-on couplings - Control drawings
- Mating face details and gauge information
BS 9612 N016-1979 振荡器用电阻焊接密封石英晶体元件用详细规范.DN、DZ、DQ和DP外壳、0.8～20MHz和3.0～30MHz频率范围.宽温范
Detail specification for resistance welded seal
quartz crystal units for oscillator applications
- DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz
and 3.0 to 30 MHz frequency ranges - Fundamental
thickness-shear mode, AT-cut, for operation
over wide temperature ranges (non-temperature
controlled) - Full assessment level
BS 9612 N017-1979 振荡器用电阻焊接密封石英晶体元件用详细规范.DN、DZ、DQ和DP外壳、0.8～20MHz和3.0～30MHz频率范围.窄温范
Detail specification for resistance welded seal
quartz crystal units for oscillator applications
- DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz
and 3.0 to 30 MHz frequency ranges - Fundamental
thickness-shear mode, AT-cut, for operation
over narrow temperature ranges (temperature
controlled) - Full assessment level
BS DD CEN ISO/TS 15011-5-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的试验室方法.通过完全或部分有机材料组成的产品焊接或切割时所
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Identification of thermal-degradation products
generated when welding or cutting through products
composed wholly or partly of organic materials
BS DD CEN ISO/TS 17845-2004 焊接和相关程序.缺陷的名称与符号系统
Welding and allied processes - Designation system
for imperfections
BS DD CEN/TS 14751-2004 焊接.焊接检验用飞行时间衍射技术(TOFD)的使用
Welding - Use of time-of-flight diffraction
technique (TOFD) for examination of welds
BS DD ENV 10080-1996 混凝土加强筋用钢.可焊肋状钢筋 B500.棒材、卷材和焊接钢筋网的交付技术状态
Steel for the reinforcement of concrete - Weldable
ribbed reinforcing steel B500 - Technical delivery
conditions for bars, coils and welded fabric
BS EN 10025-3-2004 结构钢热轧制品.正火/正火热机轧制的可焊接细粒结构钢的交货技术条件
Hot rolled products of structural steels - Technical
delivery conditions for normalized/normalized
rolled weldable fine grain structural steels
BS EN 10025-4-2004 结构钢热轧制品.热机轧制的可焊接细粒结构钢的交货技术条件
Hot rolled products of structural steels - Technical
delivery conditions for thermomechanical rolled
weldable fine grain structural steels
BS EN 10028-6-2009 压力容器用钢制扁平产品.可焊接淬火和回火细粒钢 Flat
products made of steels for pressure purposes
- Part 6:Weldable fine grain steels, quenched
and tempered
BS EN 10080-2005 混凝土增强用钢.可焊接增强钢.总则 Steel for
the reinforcement of concrete - Weldable reinforcing
steel - General
BS EN 1011-1-2009 焊接.金属材料焊接用推荐规程.弧焊用一般指南 Welding
- Recommendations for welding of metallic materials
- General guidance for arc welding
BS EN 1011-2-2001 焊接.金属材料焊接的推荐规范.铁素体钢的电弧焊接 Welding
- Recommendations for welding of metallic materials
- Arc welding of ferritic steels
BS EN 1011-3-2000 焊接.金属材料焊接的推荐规范.不锈钢的电弧焊接 Welding
- Recommendations for welding of metallic materials
- Arc welding of stainless steels
BS EN 1011-4-2000 焊接.金属材料焊接的推荐规范.铝及铝合金的电弧焊接
Welding - Recommendations for welding of metallic
materials - Arc welding of aluminium and aluminium
alloys
BS EN 1011-5-2003 焊接.金属材料焊接的推荐规程.覆层钢的焊接 Welding
- Recommendations for welding of metallic materials
- Welding of clad steel
BS EN 1011-6-2005 焊接.金属材料焊接的建议.第6部分:激光束焊接 Welding
- Recommendations for welding of metallic materials
- Part 6: Laser beam welding
BS EN 1011-7-2004 焊接.金属材料焊接的推荐规范.电子束焊 Welding
- Recommendations for welding of metallic materials
- Electron beam welding
BS EN 1011-8-2004 焊接.金属材料焊接的推荐规范.铸铁的焊接 Welding
- Recommendations for welding of metallic materials
- Welding of cast irons
BS EN 10120-2008 焊接的储气瓶用钢薄板材和带材 Steel sheet
and strip for welded gas cylinders
BS EN 10217-1-2002 承压用焊接钢管.交付技术状态.规定室温特性的非合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Non-alloy steel tubes
with specified room temperature properties
BS EN 10217-2-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金电焊钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Electric welded non-alloy
and alloy steel tubes with specified elevated
temperature properties
BS EN 10217-3-2002 承压用的焊接钢管.交付技术状态.合金细晶粒钢管 Welded
steel tubes for pressure purposes - Technical
delivery conditions - Alloy fine grain steel
tubes
BS EN 10217-4-2002 承压用的焊接钢管.交付技术状态.规定了低温特性的非合金和合金电焊钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Electric welded non-alloy
steel tubes with specified low temperature properties
BS EN 10217-5-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金埋弧焊接钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Submerged arc welded non-alloy
and alloy steel tubes with specified elevated
temperature properties
BS EN 10217-6-2002 承压用的焊接钢管.交付技术条件.规定了低温特性的非合金埋弧焊接钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Submerged arc welded non-alloy
steel tubes with specified low temperature properties
BS EN 10217-7-2005 压力用途焊接钢管.交货技术条件.不锈钢管 Welded
steel tubes for pressure purposes - Technical
delivery conditions - Stainless steel tubes
BS EN 10219-1-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.交货技术要求
Cold formed welded structural hollow sections
of non-alloy and fine grain steels - Technical
delivery requirements
BS EN 10219-2-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.公差、尺寸和局部特性
Cold formed welded structural hollow sections
of non-alloy and fine grain steels - Tolerances,
dimensions and sectional properties
BS EN 10220-2002 无缝和焊接钢管.尺寸和每单位长度的质量 Seamless
and welded steel tubes - Dimensions and masses
per unit length
BS EN 10222-4-1999 压力容器用钢锻件.具有高验收强度的可焊接细晶粒钢
Steel forgings for pressure purposes - Weldable
fine-grain steels with high proof strength
BS EN 10223-4-1998 栅栏用钢丝和钢丝制品.钢丝焊接网式栅栏 Steel
wire and wire products for fences - Steel wire
welded mesh fencing
BS EN 10223-7-2002 栏栅用钢丝和金属丝制品.栏栅用钢丝焊接网板 Steel
wire and wire products for fences - Steel wire
welded panels - For fencing
BS EN 10225-2009 固定近海结构的可焊接结构钢.技术提交条件 Weldable
structural steels for fixed offshore structures
- Technical delivery conditions
BS EN 10246-1-1996 钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验
Non-destructive testing of steel tubes - Automatic
electromagnetic testing of seamless and welded
(except submerged arc welded) ferromagnetic
steel tubes for verification of hydraulic leak-tightness
BS EN 10246-11-2000 钢管的无损检验.对无缝和焊接钢管进行液体渗透试验以检测其表面缺陷
Non-destructive testing of steel tubes - Liquid
penetrant testing of seamless and welded steel
tubes for the detection of surface imperfections
BS EN 10246-12-2000 钢管的无损检验.对无缝和焊接铁磁钢管进行磁粉检验以检测其表面缺陷
Non-destructive testing of steel tubes - Magnetic
particle inspection of seamless and welded ferromagnetic
steel tubes for the detection of surface imperfections
BS EN 10246-13-2000 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测
Non-destructive testing of steel tubes - Automatic
full peripheral ultrasonic thickness testing
for seamless and welded (except submerged arc
welded) steel tubes
BS EN 10246-14-2000 钢管的无损检验.层状缺陷探测用无缝和焊接(埋弧焊接除外)钢管的自动超声波检验
Non-destructive testing of steel tubes - Automatic
ultrasonic testing of seamless and welded (except
submerged arc-welded) steel tubes for the detection
of laminar imperfections
BS EN 10246-15-2000 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测
Non-destructive testing of steel tubes - Automatic
ultrasonic testing of strip/plate used in the
manufacture of welded steel tubes for the detection
of laminar imperfections
BS EN 10246-16-2000 钢管的无损检验.对焊接钢管焊缝临近区域进行自动超声波检验以检测其层状缺陷
Non-destructive testing of steel tubes - Automatic
ultrasonic testing of the area adjacent to the
weld seam of welded steel tubes for the detection
of laminar imperfections
BS EN 10246-17-2000 钢管的无损检验.对无缝和焊接钢管管端部进行超声波检验以检测其层状缺陷
Non-destructive testing of steel tubes - Ultrasonic
testing of tube ends of seamless and welded
steel tubes for the detection of laminar imperfections
BS EN 10246-18-2000 钢管的无损检验.对无缝和焊接铁磁钢管管端部进行磁粉检验以检测其层状缺陷
Non-destructive testing of steel tubes - Magnetic
particle inspection of tube ends of seamless
and welded ferromagnetic steel tubes for the
detection of laminar imperfections
BS EN 10246-2-2000 钢管的无损检验.验证水密封性能用的无缝和焊接的(埋弧焊除外)奥氏体铁素体钢管的自动涡流试验
Non-destructive testing of steel tubes - Automatic
eddy current testing of seamless and welded
(except submerged arc welded) austenitic and
austenitic-ferritic steel tubes for verification
of hydraulic leak-tightness
BS EN 10246-3-2000 钢管的无损检验.缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动涡流检验
Non-destructive testing of steel tubes - Automatic
eddy current testing of seamless and welded
(except submerged arc-welded) steel tubes for
the detection of imperfections
BS EN 10246-5-2000 钢管的无损检验.纵向缺陷探测用无缝和焊接(埋弧焊除外)的铁磁性钢管的自动全周界磁力换能器/磁力线渗漏检验
Non-destructive testing of steel tubes - Automatic
full peripheral magnetic transducer/flux leakage
testing of seamless and welded (except submerged
arc-welded) ferromagnetic steel tubes for the
detection of longitudinal imperfections
BS EN 10246-7-2005 钢管的无损检验.纵向缺陷探测用无缝焊接钢管(埋弧焊除外)的自动全周界超声波检验
Non-destructive testing of steel tubes - Part
7: Automatic full peripheral ultrasonic testing
of seamless and welded (except submerged arc
welded) tubes for the detection of longitudinal
imperfections
BS EN 10246-9-2000 钢管的无损检验.检测纵向或横向缺陷用的焊接和埋弧焊钢管的自动超声波试验
Non-destructive testing of steel tubes - Automatic
ultrasonic testing of the weld seam of submerged
arc welded steel tubes for the detection of
longitudinal and/or transverse imperfections
BS EN 10255-2004 焊接或加螺纹的非合金钢管.交货技术条件 Non-alloy
steel tubes suitable for welding and threading
- Technical delivery conditions
BS EN 10296-1-2003 机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Non-alloy and alloy steel tubes
BS EN 10296-2-2005 机械和一般工程用焊接圆钢管.技术交货条件.不锈钢
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Stainless steel
BS EN 10305-2-2010 精密仪器用钢管.交货技术条件.焊接冷拔钢管 Steel
tubes for precision applications - Technical
delivery conditions - Welded cold drawn tubes
BS EN 10305-3-2010 精密仪器用钢管.交货技术条件.焊接冷精加工钢管 Steel
tubes for precision applications - Technical
delivery conditions - Welded cold sized tubes
BS EN 10305-5-2010 精密设备用钢管.交货技术条件.焊接和冷精加工的方形及矩形钢管
Steel tubes for precision applications - Technical
delivery conditions - Welded and cold sized
square and rectangular tubes
BS EN 10305-6-2005 精密仪器用钢管.交货技术条件.第6部分:液压和气动动力系统用焊接冷拉管材
Steel tubes forprecisionapplications —Technical
deliveryconditions —Part 6: Welded cold drawn
tubes forhydraulic and pneumatic powersystems
BS EN 10312-2003 包括人生活用水在内的水成液输送用焊接不锈钢管.交货技术条件
Welded stainless steel tubes for the conveyance
of aqueous liquids inclu ding water for human
consumption - Technical delivery conditions
BS EN 1043-1-1996 金属材料焊接的破坏试验.硬度试验.第1部分:电弧焊接的硬度试验
Destructive tests on welds in metallic materials
- Hardness testing - Hardness test on arc welded
joints
BS EN 1043-2-1997 金属材料焊接点的破坏试验.第2部分:焊接连接件的显微硬度试验
Destructive tests on welds in metallic materials
- Hardness testing - Micro hardness testing
on welded joints
BS EN 1123-1-1999 污水系统用插接管的纵向焊接热浸镀锌钢管及配件.要求、试验和质量控制
Pipes and fittings of longitudinally welded
hot-dip galvanized steel pipes with spigot and
socket for waste water systems - Requirements,
testing, quality control
BS EN 1123-2-2006+A1-2007 废水系统用带套管和座孔的径向焊接热浸镀锌钢管的管道和配件.第2部分:尺寸
Pipes and fittings of longitudinally welded
hot-dip galvanized steel tube with spigot and
socket for waste water systems - Part 2: Dimensions
BS EN 1123-3-2004 污水系统用带插接套的纵向焊接热浸镀锌钢管及配件.真空排水系统以及造船用排水系统的尺寸和特殊要求
Pipes and fittings of longitudinally welded
hot-dip galvanized steel pipes with spigot and
socket for waste water systems - Dimensions
and special requirements for vacuum drainage
systems and for drainage systems in ship-building
BS EN 1124-1-1999 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.要求、测试和质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Requirements, testing,
quality control
BS EN 1124-2-2007 废水系统用带套筒的纵向焊接不锈钢管道和配件.第2部分:S系统.尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - System S; dimensions
BS EN 1124-3-2008 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.X.设备尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 3:System X. Dimensions
BS EN 1124-4-2005 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统的部件
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems — Part 4: Components
for vacuum drainage systems and for drainage
systems on ships
BS EN 12074-2000 焊接用料.焊接和相关工艺用消耗品的生产、供应和配送质量要求
Welding consumables - Quality requirements for
manufacture, supply and distribution of consumables
for welding and allied processes
BS EN 12493-2008 液化石油气(LPG)设备和附件.LPG用焊接钢罐.油槽汽车的设计和制造
(LPG) —Road tankers designand manufacture
BS EN 12517-1-2006 焊缝的无损检验.用放射线照相术评定钢、镍、钛及其合金的焊接接缝.验收等级
Non-destructive testing of welds - Evaluation
of welded joints in steel, nickel, titanium
and their alloys by radiography - Acceptance
levels
BS EN 12517-2-2008 焊缝的无损检验.通过射线照相术评估铝及铝合金的焊接接头.验收等级
Non-destructive testing of welds - Part 2: Evaluation
of welded joints in aluminium and its alloys
by radiography - Acceptance levels
BS EN 12542-2002 安装在地面上的储存容量不超过13M<上标3>的成系列生产的液化石油气储存用固定焊接圆柱形气罐.设计与制造
Static welded cylindrical tanks, serially produced
for the storage of liquefied petroleum gas (LPG)
having a volume not greater than 13 m3 and for
installation above ground - Design and manufacture
BS EN 1256-2006 气焊设备.焊接、切割和相关工艺用软管组件规范 Gas welding
equipment - Specification for hose assemblies
for equipment for welding, cutting and allied
processes
BS EN 12573-1-2000 焊接非静压热塑罐.一般原理 Welded static
non-pressurized thermoplastic tanks - General
principles
BS EN 12573-2-2000 焊接非静压热塑罐.立式圆柱形罐的计算 Welded
static non-pressurized thermoplastic tanks -
Calculation of vertical cylindrical tanks
BS EN 12573-3-2000 焊接非静压热塑罐.单层矩形罐的设计和计算 Welded
static non-pressurized thermoplastic tanks -
Design and calculation for single skin rectangular
tanks
BS EN 12573-4-2000 焊接非静压热塑罐.法兰接头的设计和计算 Welded
static non-pressurized thermoplastic tanks -
Design and calculation of flanged joints
BS EN 12627-1999 工业阀门.钢阀门的对接焊接端 Industrial valves
- Butt welding ends for steel valves
BS EN 12732-2000 供气系统.焊接钢管.功能要求 Gas supply systems
- Welding steel pipework - Functional requirements
BS EN 12760-1999 阀门.钢阀门的套节焊接端 Valves - Socket
welding ends for steel valves
BS EN 12797-2000 铜焊.铜焊接头破坏试验 Brazing - Destructive
tests of brazed joints
BS EN 12799-2000 铜焊.铜焊接头无损检验 Brazing - Non-destructive
examination of brazed joints
BS EN 12814-1-2000 热塑性半成品焊接接头试验.弯曲试验 Testing
of welded joints of thermoplastics semi-finished
products - Bend test
BS EN 12814-2-2000 热塑半成品焊接接头试验.拉伸试验 Testing
of welded joints of thermoplastics semi-finished
products - Tensile test
BS EN 12814-3-2000 热塑半成品焊接接头试验.拉伸蠕变试验 Testing
of welded joints of thermoplastics semi-finished
products - Tensile creep test
BS EN 12814-4-2001 热塑半成品焊接接头试验.剥离试验 Testing
of welded joints of thermoplastics semi-finished
products - Peel test
BS EN 12814-5-2000 热塑半成品焊接接头试验.宏观检查 Testing
of welded joints of thermoplastics semi-finished
products - Macroscopic examination
BS EN 12814-6-2000 热塑半成品焊接接头试验.低温拉伸试验 Testing
of welded joints of thermoplastics semi-finished
products - Low temperature tensile test
BS EN 12814-7-2002 热塑性半成品的焊接接头的试验.腰形试验样品的拉伸试验
Testing of welded joints of thermoplastics semi-finished
products - Tensile test with waisted test specimens
BS EN 12814-8-2001 热塑半成品焊接接头试验.要求 Testing of
welded joints of thermoplastic semi-finished
products -. Requirements
BS EN 12862-2000 可运输气瓶.可反复灌装可运输焊接铝合金气瓶的设计和制造规范
Transportable gas cylinders - Specification
for the design and construction of refillable
transportable welded aluminium alloy gas cylinders
BS EN 13067-2003 塑料焊接人员.焊工的资格检验.热塑塑料焊接组件 Plastics
welding personnel - Qualification testing of
welders - Thermoplastics welded assemblies
BS EN 13100-1-2000 热塑性半成品焊接接头无损检验.目视检查 Non destructive
testing of welded joints of thermoplastics semi-finished
products - Visual examination
BS EN 13100-2-2004 热塑性半成品焊接接头的无损检验.X射线照相检验 Non
destrictive testing of welded joints of thermoplastics
semi-finished products - X-ray radiographic
testing
BS EN 13100-3-2004 热塑性半成品焊接接头的无损检验.超声检验 Non-destructive
testing of welded joints in thermoplastics semi-finished
products - Ultrasonic testing
BS EN 13110-2002 液化石油气用可运输、可再充气的焊接铝瓶.设计和制造 Transportable
refillable welded aluminium cylinders for liquefied
petroleum gas (LPG) - Design and construction
BS EN 1320-1997 金属材料焊接点的破坏试验.断裂试验 Destructive
tests on welds in metallic materials - Fracture
tests
BS EN 1321-1997 金属材料焊接点的破坏试验.焊接点的宏观和微观检验 Destructive
test on welds in metallic materials - Macroscopic
and microscopic examination of welds
BS EN 1326-1996 气焊设备.气体硬钎焊和焊接用小型设备箱 Gas welding
equipment - Small kits for gas brazing and welding
BS EN 1327-1996 气焊设备.焊接和类似工艺用热固性软管 Gas welding
equipment - Thermoplastic hoses for welding
and allied processes
BS EN 13322-1-2003+A1-2006 可运输的气瓶.可再充填的焊接钢瓶.设计和制造.碳钢
Transportable gas cylinders - Refillable welded
steel gas cylinders - Design and construction
- Carbon steel
BS EN 13322-2-2003 可运输的气瓶.可再充填的焊接钢瓶.设计和制造.不锈钢
Transportable gascylinders — Refillablewelded
steel gascylinders — Design andconstruction
—Part 2: Stainless steel
BS EN 13347-2002 铜和铜合金.焊接和钎焊用杆材和线材 Copper and
copper alloys - Rod and wire for welding and
braze welding
BS EN 13479-2004 焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准
Welding consumables - General product standard
for filler metals and fluxes for fusion welding
of metallic materials
BS EN 13622-2002 气体焊接设备.术语.气体焊接使用的术语 Gas welding
equipment - Terminology - Terms used for gas
welding equipment
BS EN 13705-2004 热塑焊接.热气焊机械和设备(包括挤焊) Welding
of thermoplastics - Machines and equipment for
hot gas welding (including extrusion welding)
BS EN 14015-2005 在室温和高于室温下液体储存用现场建造的立式、圆柱形、平底、地上用焊接钢罐的设计和制造规范
Specification for the design and manufacture
of site built, vertical, cylindrical, flat-bottomed,
above ground, welded, steel tanks for the storage
of liquids at ambient temperature and above
BS EN 14075-2002 地下设备用和石油液化气储气容量不大于13 mUP3的静止焊接系列园柱型钢罐.设计和制造
Static welded steel cylindrical tanks, serially
produced for the storage of liquefied petroleum
gas (LPG) having a volume not greater than 13
m3 and for installation underground - Design
and manufacture
BS EN 14140-2003 液化石油气(LPG)用可移动可重填焊接钢瓶.备选方案设计和建造
Transportable refillable welded steel cylinders
for liquefied petroleum gas (LPG) - Alternative
design and construction
BS EN 14163-2001 石油和天然气工业.管道运输系统.管道焊接 Petroleum
and natural gas industries - Pipeline transportation
systems - Welding of pipelines
BS EN 1418-1998 焊接操作人员.金属材料全机械化焊接和自动焊接用的熔焊和电阻焊定位器的焊接操作人员的批准试验
Welding personnel - Approval testing of welding
operators for fusion welding and resistance
weld setters for fully mechanized and automatic
welding of metallic materials
BS EN 14208-2004 可移动式储气瓶.气体运输用容量最高达1000升的焊接的压力桶规范.设计和建造
Transportable gas cylinders - Specification
for welded pressure drums up to 1000 litre capacity
for the transport of gases - Design and construction
BS EN 14286-2008 铝和铝合金.危险品的存储和运输槽罐用可焊接轧制产品 Aluminium
andaluminium alloys— Weldable rolledproducts
for tanksfor the storage andtransportation ofdangerous
goods
BS EN 14324-2004 铜焊.铜焊接合的应用指南 Brazing - Guidance
on the application of brazed joints
BS EN 1435-1997 焊缝的无损检验.焊接接头的放射性检验 Non-destructive
examination of welds - Radiographic examination
of welded joints
BS EN 1442-2006+A1-2008 液化石油气(LPG)设备和附件.LPG用可运输、再填充焊接钢瓶.设计和结构
LPG equipment andaccessories —Transportablerefillable
welded steelcylinders for LPG —Design andconstruction
BS EN 14532-1-2004 焊接消耗品.试验方法和质量要求.钢、镍和镍合金消耗品的基本方法和合格评定
Welding consumables - Test methods and quality
requirements - Primary methods and conformity
assessment of consumables for steel, nickel
and nickel alloys
BS EN 14532-2-2004 焊接消耗品.试验方法和质量要求.钢、镍和镍合金耗材的补充方法和合格评定
Welding consumables - Test methods and quality
requirements - Supplementary mekthods and conformity
assessment of consumables for steel, nickel
and nickel alloys
BS EN 14532-3-2005 焊接消耗品.试验方法和质量要求.铝合金焊接用焊丝电极、焊丝和焊棒的合格评定
Welding consumables - Test methods and quality
requirements - Conformity assessment of wire
electrodes, wires and rods for welding of aluminium
alloys
BS EN 14587-2-2009 铁路设施.轨道.铁轨的闪光对焊.第2部分:在除固定车间外的场所使用移动式电焊机焊接的新型R220,R260,R260Mn
Railway applications - Track - Flash butt welding
of rails - Part 2: New R220, R260, R260Mn andR350HT
grade rails by mobile weldingmachines at sites
other than a fixedplant
BS EN 14610-2004 焊接和相关工艺.金属焊接工艺的定义 Welding and
allied processes - Definitions of metal welding
processes
BS EN 14638-1-2006 可运输的气瓶.容量＜150升的可再充气焊接插座.用实验方法证明设计制成的焊接奥氏体不锈钢气瓶
Transportable gas cylinders - Refillable welded
receptacles of a capacity not exceeding 150
litres - Welded austenitic stainless steel cylinders
made to a design justified by experimental methods
BS EN 14700-2005 焊接消耗品.镀硬面法用焊接消耗品 Welding consumables
- Welding consumables for hard-facing
BS EN 14717-2005 焊接和相关工艺.环境检查表 Welding and allied
processes - Environmental check list
BS EN 14728-2005 热塑焊接中的缺陷.分类 Imperfections in
thermoplastic welds - Classification
BS EN 14730-1-2006 道路设施.轨道.铁轨的铝热剂焊接.焊接过程的验收
Railway applications - Track - Aluminothermic
welding of rails - Approval of welding processes
BS EN 14730-2-2006 道路设施.轨道.铁轨的铝热剂焊接.铝热焊接工资格、合同认可和焊缝的验收
Railway applications - Track - Aluminothermic
welding of rails - Qualifications of aluminothermic
welders, approval of contractors and acceptance
of welds
BS EN 14876-2007 可运输储气瓶.定期检验和焊接钢压力桶试验 Transportable
gas cylinders - Periodic inspection and testing
of welded steel pressure drums
BS EN 14893-2006 液化石油气设备和附件.容量为150升～1000升可运输液化石油气(LPG)的焊接钢压力桶
LPG equipment and accessories - Transportable
liquefied petroleum gas (LPG) welded steel pressure
drums with a capacity between 150 litres and
1000 litres
BS EN 14913-2005 液化石油气(LPG)设备和附件.液化石油气(LPG)用可移动可再装填焊接钢瓶.替代方案设计和制造.装填前、中、后
LPG equipment and accessories - Transportable
refillable welded steel cylinders for liquefied
petroleum gas (LPG) - Alternative design and
construction - Procedure for checking before,
during and after filling
BS EN 14914-2005 液化石油气(LPG)设备和附件.液化石油气(LPG)用可移动可再装填焊接钢瓶.替代方案设计和制造.周期性检验
LPG equipment and accessories - Transportable
refillable welded steel cylinders for liquefied
petroleum gas (LPG) - Alternative design and
construction - Periodic inspection
BS EN 15085-1-2007 铁路设施.铁路车辆和部件的焊接法.总则 Railway
applications - Welding of railway vehicles and
components - General
BS EN 15085-2-2007 铁路设施.铁路车辆和组件的焊接.焊接厂商的质量要求和合格证
Railway applications - Welding of railway vehicles
and components - Quality requirements and certification
of welding manufacturer
BS EN 15085-3-2007 铁路设施.铁路车辆和组件的焊接.设计要求 Railway
applications - Welding of railway vehicles and
components - Design requirements
BS EN 15085-4-2007 铁路设施.铁路车辆和组件的焊接.生产要求 Railway
applications - Welding of railway vehicles and
components - Production requirements
BS EN 15085-5-2007 铁路设施.铁路车辆和组件的焊接.检验、测试和文献
Railway applications - Welding of railway vehicles
and components - Inspection, testing and documentation
BS EN 15385-2007 包装.柔性叠层管.测定头部焊接强度的试验方法 Packaging
- Flexible laminate tubes - Test methods to
determine the strength of the head welding
BS EN 15594-2009 铁路设施.轨道,铁轨的电弧焊接修复 Railway applications
- Track - Restoration of rails by electric arc
welding
BS EN 15617-2009 焊接接头的无损检验.飞行时间衍射技术(TOFD).接受等级
Non-destructive testing of welds - Time-of-flight
diffraction technique (TOFD) - Acceptance levels
BS EN 1598-1998 焊接和类似工艺的卫生和安全.电弧焊工艺用透明焊接屏板,屏带和遮光罩
Health and safety in welding and allied processes
- Transparent welding curtains, strips and screens
for arc welding processes
BS EN 1600-1997 焊接用料.不锈钢和耐热钢手工金属弧焊用的涂覆电极.分类
Welding consumables - Covered electrodes for
manual metal arc welding of stainless and heat
resisting steels - Classification
BS EN 169-2002 眼睛保护.焊接和有关工艺用的滤波镜.透射率要求和推荐使用方法
Personal eye-protection - Filters for welding
and related techniques - Transmittance requirements
and recommended use
BS EN 1708-1-2010 焊接.钢件基本焊接连接部件.受压的组件 Welding
- Basic welded joint details in steel - Pressurized
components
BS EN 1708-2-2000 焊接.钢焊接时的基本连接件.无内压组件 Welding
- Basic weld joint details in steel - Non-internal
pressurized components
BS EN 1711-2000 焊接的无损检验.通过综合平面分析检验焊接的边缘电流 Non-destructive
examination of welds - Eddy current examination
of welds by complex plane analysis
BS EN 1712-1997 焊接无损检验.焊点超声检测.验收水平 Non-destructive
examination of welds - Ultrasonic examination
of welded joints - Acceptance levels
BS EN 1715-3-2008 铝和铝合金.拉制坯料.机械用途(不包括焊接)特殊要求
Aluminium and aluminium alloys - Drawing stock
- Part 3:Specific requirements for mechanical
uses (excluding welding)
BS EN 1715-4-2008 铝和铝合金.线坯.第4部分:焊接应用的特殊要求 Aluminium
and aluminium alloys - Drawing stock - Part
4:Specific requirements for welding applications
BS EN 175-1997 个人防护.焊接和相关工艺中眼睛和面部的防护设备 Personal
protection - Equipment for eye and face protection
during welding and allied processes
BS EN 1778-2000 焊接热塑结构特征值.热塑设备的设计模和允许应力测定 Characteristic
values for welded thermoplastics constructions
- Determination of allowable stresses and moduli
for design of thermoplastics equipment
BS EN 1792-2003 焊接.焊接和相关工艺术语的多语种对照表 Welding
- Multilingual list of terms for welding and
related processes
BS EN 1803-2002 可运输储气瓶.焊接炭素钢储气瓶的周期性检验和测试 Transportable
gas cylinders - Periodic inspection and testing
of welded carbon steel gas cylinders
BS EN 22553-1995 焊接、铜焊和软钎焊连接件.制图符号标注 Welded,
brazed and soldered joints - Symbolic representation
on drawings
BS EN 2574-1990 焊接规范.图纸上的数据 Specification for
welds - Information on drawings
BS EN 2591-514-2002 电气和光学连接元件.试验方法.自带焊料和助熔剂的焊接点的可焊接性
Elements of electrical and optical connection
- Test methods - Solderability of contacts with
self-contained solder and flux
BS EN 2656-2001 航空航天系列.管连接件.焊接的连接件端头.几何布局 Aerospace
series - Pipe coupling - Coupling end, welded
- Geometric configuration
BS EN 288-9-1999 金属材料焊接程序的规范和批准.传输管道的陆地和海岸现场对焊管道的焊接程序试验
Specification and approval of welding procedures
for metallic materials - Welding procedure test
for pipeline welding on land and offshore site
butt welding of transmission pipelines
BS EN 2997-007-2006 航空航天系列.连续工作温度为-65℃～175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的
Aerospace series - Connectors, electrical, circular,
coupled by threaded ring, fire-resistant or
non fire-resistant, operating temperatures -65
°C to 175 °C continuous, 200 °C continuous,
260 °C peak - Hermetic receptacle with round
flange attached by welding or brazing - Product
standard
BS EN 3081-2001 航空航天系列.钛合金管连接件8°30'.带动梁密封端头的修理用焊接箍
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Ferrules welded, with dynamic beam seal
end, for repair
BS EN 3082-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Unions, bulkhead welded, for repair
BS EN 3083-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Unions, bulkhead, long welded end, for
repair
BS EN 3084-2001 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Unions, welded end threaded for repair
BS EN 3155-012-2006 航空航天系列.用于连接部件的电连接器.R级、焊接、D型、尺寸8、三轴插头电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
triaxial, size 8, male, type D, solder, class
R. Product standard
BS EN 3155-013-2006 航空航天系列.用于连接元件的电触点.R级、焊接、D型、尺寸为8的插座三轴电触点.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
triaxial, size 8, female, type D, solder, class
R. Product standard
BS EN 3155-039-2007 航空航天系列.用于连接部件的电触点.R级、焊接、D型、阴性、尺寸16、同轴电触点产品标准
Aerospace series —Electrical contacts usedin
elements ofconnection —Part 039: Contacts, electrical,
coaxial,size 16, female, type D, solder, class
R —Product standard
BS EN 3155-040-2007 航空航天系列.用于连接部件的电触点.R级、焊接、D型、阳性、尺寸12、同轴电触点产品标准
Aerospace series —Electrical contacts usedin
elements ofconnection —Part 040: Contacts, electrical,
coaxial,size 12, male, type D, solder, class
R —Product standard
BS EN 3155-041-2007 航空航天系列.用于连接部件的电触点.R级、焊接、D型、阴性、尺寸12、同轴电触点产品标准
Aerospace series —Electrical contacts usedin
elements ofconnection —Part 041: Contacts, electrical,
coaxial,size 12, female, type D, solder, class
R —Product standard
BS EN 3155-042-2006 航空航天系列.连接部件用电触点.P级、焊接、D型、042插头、尺寸为08的三轴电触点.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
triaxial, size 08, male 042, type D, solder,
class P. Product standard
BS EN 3155-043-2006 航空航天系列.连接部件中用电连接器.第043部分:P级、焊接、D型、043插座、尺寸08mm三轴电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 043: Contacts,
electrical, triaxial, size 08, female 043, type
D, solder, class P - Product standard
BS EN 3155-058-2006 航空航天系列.用于连接部件的电接触器.R级、焊接、D型、尺寸为16、同轴电接触器插头的产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
coaxial, size 16, male, type D, solder, class
R. Product standard
BS EN 3155-061-2006 航空航天系列.连接元件用电连接器.R级、焊接、D型、插座、尺寸12、屏蔽、同轴、电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
coaxial, shielded, size 12, female, type D,
solder, class R. Product standard
BS EN 3155-067-2009 航空航天系列.连接元件用电连接器.R级焊接D型尺寸为8的同轴插头电连接器产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
coaxial, size 08, male, type D, solder, class
R. Product standard
BS EN 3155-068-2009 航空航天系列.连接元件中使用的电触点.R级、D型、尺寸为08的焊接插头同轴电气触点产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
coaxial, size 08, female, type D, solder, class
R. Product standard
BS EN 3155-069-2009 航空航天系列.连接元件用电连接器.P级焊接D型尺寸为16的同轴插座电连接器产品标准
Aerospace series - Electrical contacts used
in elements of connection - Contacts, electrical,
coaxial, size 16, female, type D, solder, class
P. Product standard
BS EN 3218-005-2006 航空航天系列.带金属壳和螺钉锁紧的矩形连接器.带非移动式尺寸为22的焊接触点的插头.产品标准
Aerospace series - Connectors, rectangular,
with metallic shells and screw-locking - Plug
with non-removable size 22 solder contacts -
Product standard
BS EN 3218-006-2006 航空航天系列.金属壳和螺钉锁紧的矩形连接器.带非抽取式尺寸为22焊接连接器的插座.产品标准
Aerospace series - Connectors, rectangular,
with metallic shells and screw-locking - Receptacle
with non-removable size 22 solder contacts -
Product standard
BS EN 3243-2001 航空航天系列.钛合金8°30'管连接件.带动力横梁密封端头的焊接环箍
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Ferrule, welded, with dynamic beam seal
end
BS EN 3247-2001 航空航天系列.钛合金8°30'管连接件.闷头焊接端活接头、
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Unions, bulkhead welded end
BS EN 3272-2001 航空航天系列.8°30'钛合金管连接件.动态横梁密封端头的焊接箍.几何配置
Aerospace series - Pipe coupling 8 °30' - Dynamic
beam seal end for ferrule, welded - Geometric
configuration
BS EN 3372-005-2007 航空航天系列.工作温度在-65℃～175℃或连续工作温度为200℃、带卡口连接的、防碰擦、中和高接触密度、圆形
Aerospace series - Connectors, electrical, circular,
medium and high contact density, scoop-proof
with bayonet coupling, operating temperatures
-65 °C to 175 °C or 200 °C continuous - Receptacle,
hermetic, round flange, solder mounting - Product
standard
BS EN 3475-509-2002 航空航天系列.飞行器用电缆.试验方法.可焊接性
Aerospace series - Cables, electrical, aircraft
use - Test methods - Solderability
BS EN 3561-2001 航空航天系列.钛合金管连接件8°30'.在管端焊接和变径的带动力横梁密封端头的环箍
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Ferrules with dynamic beam seal end,
welded and reduced at pipe end
BS EN 3635-2008 航空航天系列.焊接边缘.几何构造 Aerospace series
- Weld lip - Geometrical configuration
BS EN 3646-007-2006 航空航天系列.连续工作温度为175℃或200℃、圆形卡口耦合的电连接器.定位焊接或铜焊安装的圆形法兰密封插座
Aerospace series - Connectors, electrical, circular,
bayonet coupling, operating temperature 175
°C or 200 °C continuous - Receptacle, hermetic,
round flange, welding or brazing mounting -
Product standard
BS EN 3688-2001 航空航天系列.焊接管用钛合金制T环形填充物.14000kPa公称压力
Aerospace series - T-ring fillers in titanium
alloy for welded pipes - 14000 kPa nominal pressure
BS EN 3689-2001 航空航天系列.焊接管用钛合金制T环形填充物.28000kPa公称压力
Aerospace series - T-ring fillers in titanium
alloy for welding pipes - 28000 kPa nominal
pressure
BS EN 3691-2001 航空航天系列.钛合金8°30'管连接件.长焊接的闷头活接头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Unions, bulkhead, long welded
BS EN 3716-004-2006 航空航天系列.数字数据传输用三级接口的单路连接器.焊接插头.产品标准
Aerospace series - Connectors, single-way with
triaxial interface, for transmission of digital
data - Solder plug - Product standard
BS EN 379-2003+A1-2009 个人护眼装置.自动焊接滤光镜 Personal
eye-protection - Automatic welding filters
BS EN 3852-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直螺纹式焊接接头
Aerospace series - Pipe couplings, 60 °, spherical,
in titanium alloy TI-P64001 - Straight unions,
welded, threaded
BS EN 3854-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.焊接箍
Aerospace series - Pipe couplings, 60 °, spherical,
in titanium alloy TI-P64001 - Ferrules, welded
BS EN 3857-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.焊接90度弯头
Aerospace series - Pipe couplings, 60 °, spherical,
in titanium alloy TI-P64001 - Elbows 90 °, welded
BS EN 3868-2005 航空航天系列.管连接件、松套法兰和密封件.钛合金TI-P64001焊接法兰连接件
Aerospace series - Pipe couplings, loose flanges
and seals - Flange connectors, welded, in titanium
alloy TI-P64001
BS EN 3882-2001 航空航天系列.耐热合金NI-WH1801(NiCr20Co18Ti3Al2).焊接用填充金属丝
Aerospace series - Heat resisting alloy NI-WH1801
(NiCr20Co18Ti3Al2) - Filler wire for welding
BS EN 3883-2001 航空航天系列.耐热合金NI-WH2301(NiCr22Fe19Mo9Co2).焊接用填充金属
Aerospace series - Heat resisting alloy NI-WH2301
(NiCr22Fe19Mo9Co2) - Filler metal for welding
BS EN 3884-2001 航空航天系列.耐热合金NI-WH2601(NiCr19Nb5Mo3Ti).焊接用填充金属
Aerospace series - Heat resisting alloy NI-WH2601
(NiCr19Nb5Mo3Ti) - Filler metal for welding
BS EN 3885-2001 航空航天系列.耐热合金NI-WH3601(NiCr22Mo9Nb4).焊接用填充金属
Aerospace series - Heat resisting alloy NI-WH3601
(NiCr22Mo9Nb4) - Filler metal for welding
BS EN 3886-2001 航空航天系列.耐热合金NI-WH1303(NiCo20Cr20Mo5Ti2Al).焊接用填充金属
Aerospace series - Heat resisting alloy NI-WH1303
(NiCo20Cr20Mo5Ti2Al) - Filler metal for welding
BS EN 3887-2001 航空航天系列.耐热合金钢CO-WH4101(CoCr20W15Ni).焊接填充金属
Aerospace series - Heat resisting alloy CO-WH4101
(CoCr20W15Ni) - Filler metal for welding
BS EN 3888-2001 航空航天系列.耐热合金CO-WH1402(CoCr22Ni22W15).焊接用填充金属
Aerospace series - Heat resisting alloy CO-WH1402
(CoCr22Ni22W15) - Filler metal for welding
BS EN 3889-2002 航空航天系列.FE-WM3801(X5CrNiCu17-4)钢.焊接用填充金属
Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4)
- Filler metal for welding
BS EN 3890-2002 航空航天系列.钢FE-WM1502(X11CrNiMoVN12-3).焊接用填充金属
Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3)
- Filler metal for welding
BS EN 3892-2001 航空航天系列.钛合金TI-W64001.焊接填充金属 Aerospace
series - Titanium alloy TI-W64001 - Filler metal
for welding
BS EN 3893-2001 航空航天系列.钛合金TI-W19001.焊接用填充金属
Aerospace series - Titanium alloy TI-W19001
- Filler metal for welding
BS EN 3894-2001 航空航天系列.耐热合金NI-WD3201(NiMo25Fe6Cr5).焊接填充金属
Aerospace series - Heat resisting alloy NI-WD3201
(NiMo25Fe6Cr5) - Filler metal for welding
BS EN 3895-2001 航空航天系列,耐热合金NI-WH3901(NiCr16Mo15).焊接填充金属
Aerospace series - Heat resisting alloy NI-WH3901
(NiCr16Mo15) - Filler metal for welding
BS EN 3896-2002 航空航天系列.钢FE-WM1501(X13CrNiMoCo12-3-2-2).焊接用填充金属
Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2.
Filler metal for welding
BS EN 3897-2002 航空航天系列.钢FE-WA4801(X6CrNiMnNb18-10).焊接用填充金属
Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10)
- Filler metal for welding
BS EN 4019-2001 航空航天系列.钛合金管连接件8°30'.焊接的90°弯头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Elbows 90 °, welded
BS EN 4020-2009 航空航天系列.钛合金管连接 8°30'.带推进线螺母焊接端90°弯头
Aerospace series - Pipe coupling 8°30' in titanium
alloy - Elbows 90°, welded end with thrust wire
nut
BS EN 4022-2001 航空航天系列.钛合金管连接件8°30'.闷头、90°弯头焊接端头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Elbows 90 °, bulkhead, welded end
BS EN 4024-2009 航空航天系列.钛合金管连接8°30'.带推进线螺母的45°弯头焊接端
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Elbows 45 ° welded end with thrust wire
nut
BS EN 4031-2001 航空航天系列.钛合金管连接件8°30'.焊接活接头用螺母
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Nut for welded union
BS EN 4058-2001 航空航天系列.钛和钛合金制的焊接用填充杆材和填充金属丝.直径为0.5mm
5.0mm.尺寸 Aerospace series - Filler rods and
filler wires for welding in titanium and titanium
alloys - Diameter 0,5 mm D 5,0 mm - Dimensions
BS EN 4059-2001 航空航天系列.钢焊接填充线和填充棒.直径0.5mm和5.0mm.尺寸
Aerospace series - Filler rods and filler wire
for welding in steel - Diameter 0,5 mm D 5,0
mm - Dimensions
BS EN 4060-2001 航空航天系列.钛和钛合金制的焊接用填充杆材和填充金属丝.直径为0.5mm
5.0mm.尺寸 Aerospace series - Filler rods and
filler wires for welding in heat resisting alloys
- Diameter 0,5 mm D 5,0 mm - Dimensions
BS EN 4183-2001 航空航天系列.钛合金管连接件8°30'.90°弯头焊接端头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Elbows 90 ° welded ends
BS EN 4184-2001 航空航天系列.钛合金管连接件8°30'.45°弯头双焊接端头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Elbows 45 ° double, welded ends
BS EN 4188-2001 航空航天系列.钛合金管连接件8°30'.90°弯头长闷头焊接端头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Elbows 90 ° bulkhead, long, welded end
BS EN 4233-2001 航空航天系列.钛合金管连接件8°30'.带螺纹的焊接活接头
Aerospace series - Pipe coupling 8 °30' in titanium
alloy - Unions, welded, threaded
BS EN 4324-2002 航空航天系列.AL-W42201铝合金.焊接用填充金属.焊条
Aerospace series - Aluminium alloy AL-W42201
- Filler metal for welding - Rod
BS EN 4325-2001 航空航天系列.耐热合金NI-WH1302(NiCr20Co13Mo4Ti3Ai).焊接填充金属.金属丝和焊条
Aerospace series - Heat resisting alloy NI-WH1302
(NiCr20Co13Mo4Ti3AI) - Filler metal for welding
- Wire and rod
BS EN 4328-2002 航空航天系列.FE-WM1601钢 (X18CrWNi13-3-2).焊接用填充金属.焊丝和焊条
Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2)
- Filler metal for welding - Wire and rod
BS EN 4329-2001 航空航天系列.耐热合金NI-WH0001(NiCr20).焊接填充金属.金属丝和焊条
Aerospace series - Heat resisting alloy NI-WH0001
(NiCr20) - Filler metal for welding - Wire and
rod
BS EN 4330-2002 航空航天系列.FE-WA4802钢 (X8CrNiMn27-22-2).焊接用填充金属.焊丝和焊条
Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2)
- Filler metal for welding - Wire and rod
BS EN 4331-2002 航空航天系列.FE-WL1804钢 (25CrMnMo4-2-2).焊接用填充金属.焊丝和焊条
Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2)
- Filler metal for welding - Wire and rod
BS EN 4332-2002 航空航天系列.FE-WL1805钢 (8CrMnMo12-4-9).
焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WL1805
(8CrMnMo12-4-9) - Filler metal for welding -
Wire and rod
BS EN 4333-2002 航空航天系列.FE-WA4902钢 (X5CrNiCoMoWMn21-20-20-3-3-2).
焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WA4902
(X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal
for welding - Wire and rod
BS EN 4334-2002 航空航天系列.FE-WL1806钢 (15CrMnMoV5-4-9-3).
焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WL1806
(15CrMnMoV5-4-9-3) - Filler metal for welding
- Wire and rod
BS EN 4335-2002 航空航天系列.FE-WA2602钢 (X4NiCrTiMoV26-15).
焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WA2602
(X4NiCrTiMoV26-15) - Filler metal for welding
- Wire and rod
BS EN 4336-2002 航空航天系列.FE-WA3801钢 (X4CrNiMn20-10-2).
焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WA3801
(X4CrNiMn20-10-2) - Filler metal for welding
- Wire and rod
BS EN 4340-2002 航空航天系列.MG-W68001镁合金钢. 焊接用填充金属.焊丝和焊条
Aerospace series - Magnesium alloy MG-W68001
- Filler metal for welding - Wire and rod
BS EN 4341-2001 航空航天系列.铝合金AL-W46431.焊接填充金属.金属丝和焊条
Aerospace series - Aluminium alloy AL-W46431
- Filler metal for welding - Wire and rod
BS EN 4342-2001 航空航天系列.钛Ti-W99001.焊接填充金属.金属丝和焊条
Aerospace series - Titanium TI-W99001 - Filler
metal for welding - Wire and rod
BS EN 4343-2002 航空航天系列.FE-WM1001 ( X13Cr12 )钢.
焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WM1001
(X13Cr12) - Filler metal for welding - Wire
and rod
BS EN 4549-2003 航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计造型.英制
Aerospace series - Pipe coupling, in heat resisting
steel or in heat resisting nickel alloy - Coupling
end, welded - Design configuration - Inch series
BS EN 4552-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的直管接头.英制
Aerospace series - Pipe coupling 37 °, spherical,
in heat resisting steel - Straight nipples,
welded end - Inch series
BS EN 4553-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的90
弯头管接头.英制 Aerospace series - Pipe coupling 37
°, spherical, in heat resisting steel - Elbow
90 ° nipples, welded end - Inch series
BS EN 4555-2003 航空航天系列.耐热钢制37 管联接器.端部焊接的金属箍.英制
Aerospace series - Pipe coupling 37 °, in heat
resisting steel - Ferrules, welded end - Inch
series
BS EN 4557-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的T形管接头.英制
Aerospace series - Pipe coupling 37 °, spherical,
in heat resisting steel - Tees nipples, welded
end - Inch series
BS EN 4561-2003 航空航天系列.耐热钢制焊接管联接器.90 弯头.英制 Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Elbow 90 °. Inch series
BS EN 4562-2003 航空航天系列.耐热钢制焊接管联接器.变径管.英制 Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Reductors - Inch series
BS EN 4563-2003 航空航天系列.耐热钢制焊接管联接器.三通管.英制 Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Tees - Inch series
BS EN 4632-001-2008 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性的一般要求
Aerospace series - Welded and brazed assemblies
for aerospace constructions - Weldability and
brazeability of materials - General requirements
BS EN 4632-002-2008 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.均质铝及铝合金组件
Aerospace series - Welded and brazed assemblies
for aerospace constructions - Weldability and
brazeability of materials - Part 002: Homogeneous
assembliesaluminium and aluminium alloys
BS EN 4632-005-2009 航空航天系列.航空航天结构用材料的可焊接性和可铜焊性.耐热Ni
或Co基合金的类似组件 Aerospace series - Weldability and
brazeability of materials in aerospace constructions
- Homogeneous assemblies of heat resisting Ni
or Co base alloys
BS EN 50069-1991+A1-1993 充气式高压开关装置和控制器用铸造和锻造铝合金的焊接复合封闭物用规范
Specification for welded composite enclosures
of cast and wrought aluminium alloys for gas-filled
high- voltage switchgear and controlgear
BS EN 50445-2008 能够证明符合人体暴露于(0HZ-300GHZ)电磁场基本限制的电阻焊接、电弧焊及其相关工艺设备的产品系列标准
Product family standard to demonstrate compliance
of equipment for resistance welding, arc welding
and allied processes with the basic restrictions
related to human exposure to electromagnetic
fields (0 Hz - 300 GHz)
BS EN 560-2005 气焊设备.焊接、切割和相关工艺用设备的软管连接件 Gas
welding equipment - Hose connections for equipment
for welding, cutting and allied processes
BS EN 561-2002 气焊设备.焊接、切割和类似加工工艺用断路阀门快速连接器 Gas
welding equipment - Quick-action coupling with
shut-off valves for welding, cutting and allied
processes
BS EN 60068-2-58-2004 环境试验.试验.试验Td.表面安装设备(SMD)的可焊性、耐金属化溶融和耐焊接热试验方法
Environmental testing - Tests - Test Td - Test
methods for solderability, resistance to dissolution
of metallization and to soldering heat of surface
mounting devices (SMD)
BS EN 60317-19-1996 特种绕组线规范.涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜线.130级
Specifications for particular types of winding
wires - Solderable polyurethane enamelled round
copper wire overcoated with polyamide, class
130
BS EN 60317-2-1993 特种绕组线规范.130级带粘合层的可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Solderable polyurethane enamelled round
copper wire, class 130, with a bonding layer
BS EN 60317-20-1993 特种绕线规范.155级可焊接聚氨酯漆包圆铜线 Specifications
for particular types of winding wires - Solderable
polyurethane enamelled round copper wire, class
155
BS EN 60317-23-1993 特种绕线规范.180级可焊接聚酰胺酯漆包圆铜线
Specifications for particular types of winding
wires - Solderable polyesterimide enamelled
round copper wire, class 180
BS EN 60317-35-1993 特种绕线规范.155级带粘结层的可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Solderable polyurethane enamelled round
copper wire, class 155, with a bonding layer
BS EN 60317-36-1993 特种绕组线规范.180级带粘结层的可焊接聚酰胺酯漆包圆铜线
Specifications for particular types of winding
wires - Solderable polyesterimide enamelled
round copper wire, class 180, with a bonding
layer
BS EN 60317-4-1993 特种绕线规范.130级可焊接聚氨酯漆包圆铜线 Specifications
for particular types of winding wires - Solderable
polyurethane enamelled round copper wire, class
130
BS EN 60317-51-2001 特种绕组线规范.可焊接的聚氨酯漆包圆铜线.180级
Specifications for particular types of winding
wires - Solderable polyurethane enamelled round
copper wire, class 180
BS EN 60512-12-1-2006 电子设备连接器.试验和测量.焊接试验.试验12a.金属熔化浴法测量可焊性
Connectors for electronic equipment - Tests
and measurements - Soldering tests - Test 12a
- Solderability, wetting, solder bath method
BS EN 60512-12-4-2006 电子设备用连接器.试验和测量.焊接试验.试验12d:焊料湿浴法测量焊接加热阻力
Connectors for electronic equipment - Tests
and measurements - Soldering tests - Test 12d
- Resistance to soldering heat, solder bath
method
BS EN 60512-12-5-2006 电子设备用连接器.试验和测量.焊接试验.试验12e:铁锡焊法测量锡焊加热阻力
Connectors for electronic equipment - Tests
and measurements - Soldering tests - Test 12e
- Resistance to soldering heat, soldering iron
method
BS EN 60512-12-6-1997 电子设备用机电元件.基本试验规程和测量方法.钎焊性试验.
试验12f:机械钎焊焊接过程中溶剂和清洗剂密封性 Electromechanical components
for electronic equipment - Basic testing procedures
and measuring methods - Soldering tests - Test
12f - Sealing against flux and cleaning solvents
in machine soldering
BS EN 60512-16-20-1997 电子设备用机电元件.基本试验规程和测量方法.第16部分:触点和接线端机械试验.第20节:第16项试验:机械强度(
Electromechanical components for electronic
equipment - Basic testing procedures and measuring
methods - Mechanical tests on contacts and terminations
- Test 16t - Mechanical strength (wired termination
of solderless connections)
BS EN 60519-8-2005 电热装置安全性.第8部分:电渣焊接熔炉的特殊要求
Safety in electroheat installations - Part 8:
Particular requirements for electroslag remelting
furnaces
BS EN 60534-3-3-1998 工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀端对端尺寸
Industrial-process control valves - Dimensions
- End-to-end dimensions for buttweld, two-way,
globe-type, straight pattern control valves
BS EN 60749-20-1-2009 半导体器件.机械和气候试验方法.对潮湿和焊接热综合效应敏感元器件的操作包装,标志和运输
Semiconductor devices - Mechanical and climatic
test methods - Part 20-1:Handling, packing,
labelling and shipping of surface-mount devices
sensitive to the combined effect of moisture
and soldering heat
BS EN 60779-2005 工业电热设备.电渣焊接重熔炉用试验方法 Industrial
electroheat equipment - Test methods for electroslag
remelting furnaces
BS EN 60974-1-2005 电弧焊设备.焊接电源 Arc welding equipment
- Welding power sources
BS EN 60974-12-2005 电弧焊接设备.焊接电缆耦合器 Arc welding
equipment - Coupling devices for welding cables
BS EN 60974-7-2005 电弧焊接设备.焊炬 Arc welding equipment
- Torches
BS EN 60974-8-2009 弧焊设备.焊接和等离子切割设备用气体控制台 Arc
welding equipment —Part 8: Gas consoles for
welding and plasmacutting systems
BS EN 61076-4-107-2001 电子设备用连接器.印制板连接器.基本网格为2.0mm、固定部分有印制板用焊接终端和压入终端、活动部分有不可
Connectors for electronic equipment - Printed
board connectors with assessed quality - Detail
specification for shielded two-part connectors
having a basic grid of 2,0 mm, fixed part with
solder and press-in terminations for printed
boards, free part with non-accessible insulation
displacement and crimp terminations
BS EN 61188-5-2-2003 印制板及其组件.设计和使用.焊接(焊接区/接缝)的考虑.分立元件
Printed boards and assemblies - Design and use
- Attachment (land/joint) considerations - Discrete
components
BS EN 61188-5-3-2007 印制电路板和印制电路板组件.设计和使用.第5-3部分:焊接(焊接区/焊缝)考虑.两面带有翅形引线的部件
Printed boards and printed board assemblies
- Design and use - Attachment (land/joint) considerations
- Components with gull- wing leads on two sides
BS EN 61188-5-4-2007 印制电路板和印制电路板组件.设计和使用.第5-4部分:焊接(焊接区/焊缝)考虑.两面带有J形引线的部件
Printed boards and printed board assemblies
- Design and use - Attachments (land/joint)
considerations - Components with J leads on
two sides
BS EN 61188-5-5-2007 印制电路板和印制电路板组件.设计和使用.第5-5部分:焊接(焊接区/焊缝)考虑.四面带有翅形引线的部件
Printed boards and printed board assemblies
- Design and use - Attachment (land/joint) considerations
- Components with gull- wing leads on four sides
BS EN 61188-5-8-2008 印制电路板和印制电路板组件.设计和使用.焊接(焊接区/焊缝)要求.区域阵列组件(BGA、FBGA、CGA、LGA)
Printed boards andprinted boardassemblies —
Designand use —Part 5-8: Attachment (land/joint)considerations
— Area arraycomponents (BGA, FBGA, CGA, LGA)
BS EN 61191-1-1999 印制电路板组件.通用规范.使用表面安装和相关装配技术的焊接电气和电子组件要求
Printed board assemblies - Generic specification
- Requirements for soldered electrical and electronic
assemblies using surface mount and related assembly
technologies
BS EN 61191-2-1999 印制电路板组件.分规范.表面安装焊接组件要求 Printed
board assemblies - Sectional specification -
Requirements for surface mount soldered assemblies
BS EN 61191-3-1999 印制电路板组件.分规范.通孔安装焊接组件要求 Printed
board assemblies - Sectional specification -
Requirements for through-hole mount soldered
assemblies
BS EN 61191-4-1999 印制电路板组件.分规范.端点焊接组件要求 Printed
board assemblies - Sectional specification -
Requirements for terminal soldered assemblies
BS EN 62135-2-2008 电阻焊接设备.电磁兼容性(EMC)要求 Resistance
welding equipment - Electromagnetic compatibility
(EMC) requirements
BS EN 62137-1-1-2007 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-1部分:拉拔强度试验
Surface mounting technology - Environmental
and endurance test methods for surface mount
solder joint - Pull strength test
BS EN 62137-1-2-2007 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-2部分:剪切强度试验
Surface mounting technology - Environmental
and endurance test methods for surface mount
solder joint - Shear strength test
BS EN 62137-1-5-2009 表面安装技术.表面安装焊接点的环境承受试验方法.机械剪切疲劳试验
Surface mounting technology - Environmental
and endurance test methods for surface mount
solder joints - Part 1-5:Mechanical shear fatigue
test
BS EN 756-2004 焊接消耗品.非合金和细粒钢埋弧焊用实芯焊丝、实芯焊丝和药芯焊丝混合助熔剂.分类
Welding consumables - Solid wires, solid wire-flux
and tubular cored electrode-flux combinations
for submerged arc welding of non alloy and fine
grain steels - Classification
BS EN 757-1997 焊接用料.高强度钢手工金属弧焊用的涂药焊条的分类 Welding
consumables - Covered electrodes for manual
metal arc welding of high strength steels -
Classification
BS EN 760-1996 焊接用料 .埋弧焊用焊剂.分类 Welding consumables
- Fluxes for submerged arc welding - Classification
BS EN 875-1995 金属材料焊接的破坏试验.冲击试验.试样定位、槽口取向和检验
Destructive tests on welds in metallic materials
- Impact tests - Test specimen location, notch
orientation and examination
BS EN 876-1995 金属材料焊接的破坏试验.熔焊接点中焊接金属的纵向拉伸试验
Destructive tests on welds in metallic materials
- Longitudinal tensile test on weld metal in
fusion welded joints
BS EN 895-1995 金属材料焊接的破坏试验.横向抗拉试验 Destructive
tests on welds in metallic materials - Transverse
tensile test
BS EN IS0 22825-2006 焊接的无损试验.超声波试验.奥氏体钢和镍合金焊接试验
Non-destructive testing of welds - Ultrasonic
testing - Testing of welds in austenitic steels
and nickel-based alloys
BS EN ISO 10042-2006 焊接.铝和铝合金弧焊接头.缺陷质量分级 Welding
- Arc-welded joints in aluminium and its alloys
- Quality levels for imperfections
BS EN ISO 10447-2007 电阻焊接.电阻点焊和凸焊的剥离和凿剥离测试 Resistance
welding - Peel and chisel testing of resistance
spot and projection welds
BS EN ISO 1071-2003 焊接耗材.铸铁熔焊用药皮(涂料)电焊条、焊丝、焊棒和管状焊条.分类
Welding consumables - Covered electrodes, wires,
rods and tubular cored electrodes for fusion
welding of cast iron - Classification
BS EN ISO 10882-1-2001 焊接和有关过程的卫生和安全.操作者呼吸区域的空气悬浮颗粒和气体的取样.空气悬浮颗粒取样
Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operator's breathing zone - Sampling of
airborne particles
BS EN ISO 10882-2-2000 焊接及相关工艺的卫生与安全.操作人员呼吸区域内空气中悬浮颗粒及气体的抽样.气体的抽样
Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operator's breathing zone - Sampling of
gases
BS EN ISO 11611-2008 焊接和类似工艺用防护服装 Protective
clothing for use in welding and allied processes
BS EN ISO 11970-2007 钢铸件产品焊接用焊接程序的规范和验收 Specification
and approval of welding procedures for production
welding of steel castings
BS EN ISO 13916-1997 焊接.预热温度、层间温度和预加热的维持温度测量的导则
Welding - Guidance on the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature
BS EN ISO 13918-2008 焊接.弧螺栓焊用螺栓和陶瓷箍套 Welding
- Studs and ceramic ferrules for arc stud welding
BS EN ISO 13919-1-1997 焊接.电子和激光束焊接接头.缺陷的质量级别导则.钢
Welding - Electron and laser beam welded joints
- Guidance on quality levels for imperfections
- Steel
BS EN ISO 13919-2-2001 焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金
Welding - Electron and laser beam welded joints
- Guidance on quality levels for imperfections
- Aluminium and its weldable alloys
BS EN ISO 13920-1997 焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置
Welding - General tolerances for welded constructions
- Dimensions for lengths and angles - Shape
and position
BS EN ISO 14114-1999 气焊设备.焊接,切割和有关加工工艺用的乙炔导管系统.一般要求
Gas welding equipment - Acetylene manifold systems
for welding, cutting and allied processes -
General requirements
BS EN ISO 14172-2008 焊接消耗品.镍和镍合金的手工金属弧焊用涂敷焊条.分类
Welding consumables - Covered electrodes for
manual metal arc welding of nickel and nickel
alloys - Classification
BS EN ISO 14175-2008 焊接消耗品.氧炔焊及有关工艺用气体和混合气体
Welding consumables - Gases and gas mixtures
for fusion welding and allied processes
BS EN ISO 14270-2001 电阻点焊、滚焊和浮凸焊接机械剥离试验的程序和样品尺寸
Specimen dimensions and procedure for mechanized
peel testing resistance spot, seam and embossed
projection welds
BS EN ISO 14271-2001 电阻点焊、凸焊和滚焊的焊接点维氏硬度试验(低荷载和超微硬度)
Vickers hardness testing of resistance spot,
projection and seam welds (low load and microhardness)
BS EN ISO 14272-2001 电阻点焊和浮凸焊的焊接点十字形抗拉试验的试样尺寸和程序
Specimen dimensions and procedure for cross
tension testing resistance spot and embossed
projection welds
BS EN ISO 14273-2001 电阻点焊、缝焊和浮凸焊接的焊接点剪切试验的试样尺寸和程序
Specimen dimensions and procedure for shear
testing resistance spot, seam and embossed projection
welds
BS EN ISO 14323-2006 电阻点焊和凸焊.焊接破坏试验.影响剪切试验和剪切试验的样本尺寸和程序
Resistance spot welding and projection welds
- Destructive testing of welds - Specimen dimensions
and procedure for impact shear test and cross-tension
testing
BS EN ISO 14324-2003 电阻点焊.焊接有损试验.点焊接头的疲劳试验方法
Resistance spot welding - Destructive tests
of welds - Method for the fatigue testing of
spot welded joints
BS EN ISO 14327-2004 电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程
Resistance welding - Procedures for determining
the weldability lobe for resistance spot, projection
and seam welding
BS EN ISO 14329-2003 电阻点焊.焊接有损试验.电阻点焊、缝焊和凸焊的故障类型和几何测量
Resistance welding - Destructive tests of welds
- Failure types and geometric measurements for
resistance spot, seam and projection welds
BS EN ISO 14341-2008 焊接消耗品.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类
Welding consumables - Wire electrodes and deposits
for gas shielded metal arc welding of non alloy
and fine grain steels - Classification
BS EN ISO 14343-2009 焊接材料.不锈钢和耐热钢电弧焊用焊丝电极、焊丝和焊条.分类
Welding consumables - Wire electrodes, strip
electrodes, wires and rods for arc welding of
stainless and heat resisting steels - Classification
BS EN ISO 14372-2001 焊接耗材.通过测量扩散氢方法测定手工电弧焊焊条的抗湿性
Welding consumables - Determination of moisture
resistance of manual metal arc welding electrodes
by measurement of diffusible hydrogen
BS EN ISO 14373-2007 电阻焊接.无涂层和有涂层低碳钢的点焊程序 Resistance
welding - Procedure for spot welding of uncoated
and coated low carbon steels
BS EN ISO 14554-1-2001 焊接的质量要求.金属材料的电阻焊接.全面质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Comprehensive
quality requirements
BS EN ISO 14554-2-2001 焊接的质量要求.金属材料的电阻焊接.基本质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Elementary quality
requirements
BS EN ISO 14555-2006 焊接.金属材料的电弧螺栓焊 Welding -
Arc stud welding of metallic materials
BS EN ISO 14731-2006 焊接协调.任务和责任 Welding coordination
- Tasks and responsibilities
BS EN ISO 14744-1-2008 焊接.电子束焊接机器的验收检验.原则和验收条件
Welding - Acceptance inspection of electron
beam welding machines - Principles and acceptance
conditions
BS EN ISO 14744-2-2001 焊接.电子束焊接机的验收检验.加速电压特性测量
Welding - Acceptance inspection of electron
beam welding machines - Measurement of accelerating
voltage characteristics
BS EN ISO 14744-3-2001 焊接.电子束焊接机的验收检验.电子束电流特性的测量
Welding - Acceptance inspection of electron
beam welding machines - Measurement of beam
current characteristics
BS EN ISO 14744-4-2001 焊接.电子束焊接机的验收检验.焊接速度的测量
Welding - Acceptance inspection of electron
beam welding machines - Measurement of welding
speed
BS EN ISO 14744-5-2001 焊接.电子束焊接机的验收检验.偏转精度的测量
Welding - Acceptance inspection of electron
beam welding machines - Measurement of run-out
accuracy
BS EN ISO 14744-6-2001 焊接.电子束焊接机的验收检验.电焊位置稳定性的测量
Welding - Acceptance inspection of electron
beam welding machines - Measurement of stability
of spot position
BS EN ISO 15011-1-2009 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.电弧焊产生的烟尘排放率测定和烟尘采集分析
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Determination of fume emission rate during
arc welding and collection of fume for analysis
BS EN ISO 15011-2-2009 焊接和相关工艺中的健康和安全.对电弧焊产生的烟尘和气体取样的实验室方法.在电弧焊、切削加工和刨削槽时，
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Determination of the emission rates of carbon
monoxide (CO), carbon dioxide (CO2), nitrogen
monoxide (NO) and nitrogen dioxide (NO2) during
arc welding, cutting and gouging
BS EN ISO 15011-3-2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.电弧焊时臭氧排放率的测定
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Determination of ozone emission rate during
arc welding
BS EN ISO 15011-4-2006+A1-2008 焊接和相关工艺的卫生和安全.烟,气取样用实验室法.第4部分:烟数据单
Health and safety inwelding and alliedprocesses
— Laboratorymethod for samplingfume and gases
—Part 4: Fume data sheets
BS EN ISO 15012-1-2005 焊接和相关工艺中的健康和安全.空气过滤用设备的试验和标记要求.焊接烟尘分离效率的试验
Health and safety in welding and allied processes
- Requirements testing and marking of equipment
for air filtration - Testing of the separation
efficiency for welding fume
BS EN ISO 15012-2-2008 焊接和相关工艺中的卫生和安全.空气过滤设备的要求、测试和标记.采集罩和喷嘴的最小空气体积流率的测定
Health and safety in welding and allied processes
- Requirements, testing and marking of equipment
for air filtration - Determination of the minimum
air volume flow rate of captor hoods and nozzles
BS EN ISO 15607-2003 金属材料焊接程序规范和合格鉴定.总则 Specification
and qualification of welding procedures for
metallic materials - General rules
BS EN ISO 15609-1-2004 金属材料的焊接程序规范和合格鉴定.焊接程序规范.电弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Arc welding
BS EN ISO 15609-2-2001 金属焊接程序的规范和合格评定.焊接程序规范.气焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Gas welding
BS EN ISO 15609-3-2004 金属材料焊接程序的规范和合格评定.焊接程序规范.电子束焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Electron beam welding
BS EN ISO 15609-4-2009 金属材料焊接工艺的规则和限定.焊接工艺规范.激光束焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 4: Laser beam welding (ISO 15609-4:2009)
BS EN ISO 15609-5-2004 金属材料的焊接程序规范和合格鉴定.焊接程序规范.电阻焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Resistance welding
BS EN ISO 15610-2003 金属材料焊接程序的规范和认可.基于试验消耗品的认可
Specification and qualification of welding procedures
for metallic materials - Qualification based
on tested welding consumables
BS EN ISO 15611-2003 金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification based
on previous welding experience
BS EN ISO 15612-2004 金属材料焊接程序的规范和合格鉴定.标准焊接程序采用的合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification by adoption
of a standard welding procedure
BS EN ISO 15613-2004 金属材料的焊接程序的鉴定和规范.基于预生产焊接试验的合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification based
on pre-production welding test
BS EN ISO 15614-1-2004+A1-2008 金属材料焊接工艺规范和鉴定.焊接工艺试验.钢弧焊和气焊、镍及镍合金的弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Arc and gas welding of steels and arc welding
of nickel and nickel alloys
BS EN ISO 15614-10-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.高压干焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Hyperbaric dry welding
BS EN ISO 15614-11-2002 金属材料焊接程序的规范和合格鉴定.焊接程序试验.电子和激光束焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Electron and laser beam welding
BS EN ISO 15614-12-2004 金属材料焊接程序的规范和合格鉴定.焊接程序试验.点焊、缝焊和凸焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Spot, seam and projection welding
BS EN ISO 15614-13-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.电阻对接焊和电弧对接焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Resistance butt and flash welding
BS EN ISO 15614-2-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.铝及其合金的电弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Arc welding of aluminium and its alloys
BS EN ISO 15614-3-2008 金属材料用焊接程序的规范和鉴定.焊接程序试验.非合金和低合金铸铁的氧炔焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Fusion welding of non-alloyed and low-alloyed
cast irons
BS EN ISO 15614-4-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.铝铸件的精焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Finishing welding of aluminium castings
BS EN ISO 15614-5-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.钛、锆及其合金电弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Arc welding of titanium, zirconium and their
alloys
BS EN ISO 15614-6-2006 金属材料焊接程序的规范和合格鉴定.焊接程序试验.铜及其合金的弧焊和气焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Arc and gas welding of copper and its alloys
BS EN ISO 15614-7-2007 金属材料焊接程序规范和鉴定.焊接程序试验.覆盖焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Overlay welding
BS EN ISO 15614-8-2002 金属材料焊接程序的规范和合格鉴定.焊接程序试验.管对管焊接.
平板接合 Specification and qualification of welding
procedures for metallic materials - Welding
procedure test - Welding of tubes to tube-plate
joints
BS EN ISO 15615-2002 气焊设备.焊接，切割和有关加工工艺用的乙炔气支管系统.高压装置的安全性要求
Gas welding equipment - Acetylene manifold systems
for welding, cutting and allied processes -
Safety requirements in high-pressure devices
BS EN ISO 15616-1-2003 高质量焊接和切割用CO2激光束机的验收试验.通用原则和验收条件
Acceptance tests for CO2- laser beam machines
for high quality welding and cutting - General
principles, acceptance conditions
BS EN ISO 15616-2-2003 高质量焊接和切割用CO2激光束机的验收试验.静态和动态精确度的测定
Acceptance tests for CO2- laser beam machines
for high quality welding and cutting - Measurement
of static and dynamic accuracy
BS EN ISO 15616-3-2003 高质量焊接和切割用CO2激光束机的验收试验.气体流量和压力测量仪的校正
Acceptance tests for CO2- laser beam machines
for high quality welding and cutting - Calibration
of instruments for measurement of gas flow and
pressure
BS EN ISO 15618-1-2002 水下焊接焊工的资格鉴定测试.高压湿法焊接的潜水焊工
Qualification testing of welders for under-water
welding - Diver-welders for hyperbaric wet welding
BS EN ISO 15618-2-2002 水下焊接焊工的资格鉴定测试.潜水焊工和高压干法焊工
Qualification testing of welders for under-water
welding - Diver-welders and welding operators
for hyperbaric dry welding
BS EN ISO 15620-2000 焊接.金属材料摩擦焊接 Welding - Friction
welding of metallic materials
BS EN ISO 15630-2-2002 混凝土的钢筋和预应力用钢.试验方法.焊接纤维
Steel for the reinforcement and prestressing
of concrete - Test methods - Welded fabric
BS EN ISO 15792-1-2008 焊接消耗品.试验方法.钢、镍和镍合金全焊金属试样的试验方法
Welding consumables - Test methods - Test methods
for all-weld metal test specimens in steel,
nickel and nickel alloys
BS EN ISO 15792-2-2008 焊接消耗品.试验方法.钢的单道焊和双道焊技术试样的制备
Welding consumables - Test methods - Preparation
of single-run and two-run technique test specimens
in steel
BS EN ISO 15792-3-2008 焊接消耗品.试验方法.角焊中焊接消耗品的填位能力和根部焊透力的分类测试
Welding consumables - Test methods - Classification
testing of positional capacity and root penetration
of welding consumables in a fillet weld
BS EN ISO 16432-2006 电阻焊接.用压纹凸焊法对无覆层和有覆层低碳钢的凸焊规程
Resistance welding - Procedure for projection
welding of uncoated and coated low carbon steels
using embossed projection(s)
BS EN ISO 16433-2006 电阻焊接.无涂覆和涂覆的低碳钢密封焊接用程序
Resistance welding - Procedure for seam welding
of uncoated and coated low carbon steels
BS EN ISO 16834-2007 焊接消耗品.高强度钢气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类
Welding consumables - Wire electrodes, wires,
rods and deposits for gas-shielded arc welding
of high strength steels - Classification
BS EN ISO 17632-2008 焊接消耗品.非合金和细晶粒钢的气体保护和无气体保护金属弧焊用管状芯焊条.分类
Welding consumables - Tubular cored electrodes
for gas shielded and non-gas shielded metal
arc welding of non-alloy and fine grain steels
- Classification
BS EN ISO 17633-2006 焊接消耗品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Welding consumables - Tubular cored electrodes
and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting
steels - Classification
BS EN ISO 17634-2006 焊接消耗品.抗蠕变钢的气体保护金属极电弧焊用药芯焊条.分类
Welding consumables - Tubular cored electrodes
for gas shielded metal arc welding of creep-resisting
steels - Classification
BS EN ISO 17641-1-2004 金属材料焊接的有损试验.焊件的热裂试验.弧焊过程.概要
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - General
BS EN ISO 17641-2-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.自束试验
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - Self-restraint tests
BS EN ISO 17642-1-2004 金属材料中焊接的有损检验.焊接的冷裂试验.弧焊工艺.总则
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - General
BS EN ISO 17642-2-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.自束试验
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Self-restraint tests
BS EN ISO 17642-3-2005 金属材料焊接的有损检验.焊接的冷裂试验.弧焊工艺.外部载荷试验
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Externally loaded tests
BS EN ISO 17652-1-2003 焊接.有关焊接和相关工艺的工厂底漆的试验.一般要求
Welding - Test for shop primers in relation
to welding and allied processes - General requirements
BS EN ISO 17652-2-2003 焊接.有关焊接和相关工艺有关的工厂底漆的试验.工厂底漆的焊接特性
Welding - Test for shop primers in relation
to welding and allied processes - Welding properties
of shop primers
BS EN ISO 17652-3-2003 焊接.有关焊接和相关工艺有关的工厂底漆的试验.热切割
Welding - Test for shop primers in relation
to welding and allied processes - Thermal cutting
BS EN ISO 17652-4-2003 焊接.有关焊接和相关工艺有关的工厂底漆的试验.烟气排放
Welding - Test for shop primers in relation
to welding and allied processes - Emission of
fumes and gases
BS EN ISO 17654-2003 金属材料焊缝的有损试验.电阻焊接.电阻缝焊的压力试验
Destructive tests on welds in metallic materials
- Resistance welding - Pressure test on resistance
seam welds
BS EN ISO 17657-1-2006 电阻焊接.电阻焊接用焊接电流测量.测量指南
Resistance welding - Welding current measurement
for resistance welding - Guidelines for measurement
BS EN ISO 17657-2-2006 电阻焊接.电阻焊接用焊接电流测量.带电流感应线圈的焊接电流计
Resistance welding - Welding current measurement
for resistance welding - Welding current meter
with current sensing coil
BS EN ISO 17657-3-2006 电阻焊接.电阻焊接用焊接电流测量.电流感应线圈
Resistance welding - Welding current measurement
for resistance welding - Current sensing coil
BS EN ISO 17657-4-2006 电阻焊接.电阻焊接用焊接电流测量.校验系统
Resistance welding - Welding current measurement
for resistance welding - Calibration system
BS EN ISO 17657-5-2006 电阻焊接.电阻焊接用焊接电流测量.焊接电流测量系统的验证
Resistance welding - Welding current measurement
for resistance welding - Verification of welding
current measuring system
BS EN ISO 17659-2004 焊接.带图解的焊接接头的多语种术语 Welding
- Multilingual terms for welded joints with
illustrations
BS EN ISO 17660-1-2006 焊接.钢筋焊接.承载焊接接缝 Welding
- Welding of reinforcing steel - Part 1: Load-bearingwelded
joints
BS EN ISO 17660-2-2006 焊接.钢筋焊接.非承载焊接接缝 Welding
- Welding of reinforcing steel - Part 2: Non
load-bearingwelded joints
BS EN ISO 17662-2005 焊接.包含辅助工作的焊接用设备的校正、鉴定和效验
Welding - Calibration, verification and validation
of equipment used for welding, including ancillary
activities
BS EN ISO 17663-2009 焊接.与焊接和相关工艺过程有关的热处理质量要求
Welding - Quality requirements for heat treatment
in connection with welding and allied processes(ISO17663:2009)
BS EN ISO 17677-1-2009 电阻焊接.词汇表.点焊,凸焊和缝焊 Resistance
welding - Vocabulary - Part 1: Spot, projection
and seamwelding (ISO 17677-1:2009)
BS EN ISO 18273-2004 焊接消耗品.铝和铝合金焊接用丝状电极、焊丝和焊条.分类
Welding consumables - Wire electrodes, wires
and rods for welding of aluminium and aluminium
alloys - Classification
BS EN ISO 18274-2004 焊接消耗品.镍和镍合金熔焊用丝状和杆状电极、焊丝和焊条.分类
Welding consumables - Wire and strip electrodes,
wires and rods for fusion welding of nickel
and nickel alloys - Classification
BS EN ISO 18279-2004 钎焊.钎焊接缝的缺陷 Brazing - Imperfections
in brazed joints
BS EN ISO 18592-2009 电阻焊接.焊接破坏性试验.多点疲劳试验方法.焊接样本
Resistance welding - Destructive testing of
welds - Method for the fatigue testing of multispot-
welded specimens
BS EN ISO 18594-2007 电阻点焊、凸焊和缝隙焊接.测定铝和钢材料跃迁电阻的方法
Resistance spot-, projection- and seam-welding
- Method for determining the transition resistance
on aluminium and steel material
BS EN ISO 18595-2007 电阻焊接.铝和铝合金的点焊.可焊性、焊接和测试
Resistance welding - Spot welding of aluminium
and aluminium alloys - Weldability, welding
and testing
BS EN ISO 21670-2003 法兰六角焊接螺母 Hexagon weld nuts
with flange
BS EN ISO 21952-2007 焊接消耗品.抗蠕变钢的气体保护电弧焊用丝状电极、焊丝、焊条和沉渍物.
分类 Welding consumables - Wire electrodes, wires,
rods and deposits for gas-shielded arc welding
of creep-resisting steel - Classification
BS EN ISO 22827-1-2006 Nd:YAG激光束焊接机器的验收试验.带光纤送的机器.激光装配
Acceptance tests for Nd:YAG laser beam welding
machines - Machines with optical fibre delivery
- Laser assembly
BS EN ISO 22827-2-2006 Nd:YAG激光束焊接机器的验收试验.带光纤传送的机器.移动机理
Acceptance tests for Nd:YAG laser beam welding
machines - Machines with optical fibre delivery
- Moving mechanism
BS EN ISO 22829-2007 电阻焊接.带组合变压器焊接枪用变压器整流器.工作在1000
Hz频率的变压器整流器 Resistance welding - Transformer-rectifier
for welding guns with integrated transformers
- Transformer- rectifier units operating at
1000 Hz frequency
BS EN ISO 23278-2009 焊接点无损检测.焊接点磁粒试验.验收标准 Non-destructive
testing of welds - Magnetic particle testing
of welds - Acceptance levels
BS EN ISO 24034-2005+A1-2008 焊接消耗品.钛和钛合金的熔焊用焊丝和焊条.分类
Welding consumables - Solid wires and rods for
fusion welding of titanium and titanium alloys
- Classification
BS EN ISO 24373-2009 焊接消耗品.铜和铜合金熔焊用实心焊丝和焊条.分类
Welding consumables - Solid wires and rods for
fusion welding of copper and copper alloys -
Classification
BS EN ISO 24598-2007 焊接消耗品.耐蠕变钢潜弧焊用实心焊丝、管状芯焊条和焊条/焊剂组合件.分类
Welding consumables - Solid wire electrodes,
tubular coredelectrodes and electrode/flux combinations
for submerged arcwelding of creep-resisting
steels - Classification
BS EN ISO 2503-2009 气体焊接设备.在压力为300巴(30兆帕)以下条件下在焊接,切割和相关工艺中用于气体钢瓶中的压力调节器和带有
Gas welding equipment - Pressure regulators
and pressure regulators with flow-metering devices
for gas cylinders used in welding, cutting and
allied processes up to 300 bar (30 MPa)
BS EN ISO 2560-2009 焊接材料.非合金钢和细粒钢的手工金属电弧焊用涂敷焊条.分类
Welding consumables - Covered electrodes for
manual metal arc welding of non-alloy and fine
grain steels - Classification
BS EN ISO 26304-2009 焊接消耗品.高强度钢埋弧焊用线状和管状芯电极及焊条熔剂化合物.分类
Welding consumables - Solid wire electrodes,
tubular cored electrodes and electrode-flux
combinations for submerged arc welding of high
strength steels - Classification
BS EN ISO 3580-2008 焊接消耗品.抗蠕变钢的手工金属电弧焊用药皮电焊条.规范
Welding consumables - Covered electrodes for
manual metal arc welding of creep-resisting
steels - Classification
BS EN ISO 3690-2001 焊接和相关处理.铁素体钢弧焊金属氢含量的测定 Welding
and allied processes - Determination of hydrogen
content in ferritic steel arc weld metal
BS EN ISO 4063-2009 焊接及相关工艺过程.工艺过程的名称和参考编号 Welding
and allied processes - Nomenclature of processes
and reference numbers
BS EN ISO 5182-2009 焊接.电阻焊条和辅助设备材料 Resistance
welding - Materials for electrodes and ancillary
equipment(ISO 5182:2008)
BS EN ISO 5183-1-2001 电阻焊接设备.外锥度1:10的电极适配器.锥度1:10的圆锥形固定件
Resistance welding equipment - Electrode adaptors,
male taper 1: 10 - Conical fixing, taper 1:10
BS EN ISO 5183-2-2001 电阻焊接设备.外锥度1:10电极适配器.端推力电极用平行杆固定件
Resistance welding equipment - Electrode adaptors,
male taper 1: 10 - Parallel shank fixing for
end-thrust electrodes
BS EN ISO 544-2003 焊接消耗品.焊接填充金属的交货技术条件.产品的类型、尺寸、公差和标记
Welding consumables - Technical delivery conditions
for welding filler metals - Type of product,
dimensions, tolerances and markings
BS EN ISO 5817-2007 焊接.钢、镍、钛和其合金的熔焊接头(束焊除外).缺陷的质量等级
Welding - Fusion-welded joints in steel, nickel,
titanium and their alloys (beam welding excluded)
- Quality levels for imperfections
BS EN ISO 636-2008 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类
Welding consumables - Rods, wires and deposits
for tungsten inert gas welding of non-alloy
and fine-grain steels - Classification
BS EN ISO 6520-1-2007 焊接和相关工艺.金属材料中几何缺陷的分类.熔焊
Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Fusion welding
BS EN ISO 6520-2-2002 焊接及相关工艺.金属材料中几何缺陷的分类.压力焊
Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Welding with pressure
BS EN ISO 6847-2001 焊接消耗品.化学分析用的焊接金属块的沉积 Welding
consumables - Deposition of a weld metal pad
for chemical analysis
BS EN ISO 6947-1997 焊接.工作位置.倾角和转动的定义 Welds -
Working positions - Definitions of angles of
slope and rotation
BS EN ISO 7291-2001 气焊设备.300bar以下的焊接、切削及相关工艺用汇流系统用压力调节器
Gas welding equipment - Pressure regulators
for manifold systems used in welding, cutting
and allied processes up to 300 bar
BS EN ISO 8205-3-1997 电阻焊接水冷次级线圈连接电缆.试验要求 Water-cooled
secondary connection cables for resistance welding
- Test requirements
BS EN ISO 8249-2000 焊接.奥氏体和双重铁氧体奥氏体镍不锈钢焊接金属中铁素体数的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals
BS EN ISO 8501-3-2006 涂料和相关产品使用前钢衬底的处理.表面清洁度的目测评定.:焊接、切边和其它表面缺陷区域的处理等级
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Preparation grades
of welds, edges and other areas with surface
imperfections
BS EN ISO 9018-2003 金属材料焊接的破坏试验.十字形接缝和搭接缝的抗拉试验
Destructive tests on welds in metallic materials
- Tensile test on cruciform and lapped joints
BS EN ISO 9539-2010 气焊设备.用于气体焊接、切割和相关工艺过程设备的材料
Gas welding equipment - Materials for equipment
used in gas welding, cutting and allied processes
BS EN ISO 9692-1-2003 焊接和相关工艺.接缝制备的建议.钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊
Welding and allied processes - Recommendations
for joint preparation - Manual metal-arc welding,
gas-shielded metal-arc welding, gas welding,
TIG welding and beam welding of steels
BS EN ISO 9692-2-1998 焊接和相关工艺.接头的预处理.钢的埋弧焊 Welding
and allied processes - Joint preparation - Submerged
arc welding of steels
BS EN ISO 9692-3-2001 焊接和相关工艺.接头的准备.铝及其合金的金属极惰性气体保护焊和钨极惰性气体保护焊
Welding and allied processes - Joint preparation
- Metal inert gas welding and tungsten inert
gas welding of aluminium and its alloys
BS EN ISO 9692-4-2003 焊接和相关工艺.接头制备.包钢 Welding
and allied processes - Joint preparation - Clad
steels
BS ISO 13953-2001 聚乙烯管道和配件.根据对焊接头对试样的抗拉强度和断裂模式的测定
Polyethelene (PE) pipes and fittings - Determination
of the tensile strength and failure mode of
test pieces from a butt-fused joint
BS ISO 14347-2008 疲劳.焊接中空部件连接件用设计程序.建议 Fatigue
- Design procedure for welded hollow-section
joints - Recommendations
BS ISO 17657-1-2006 电阻焊.电阻焊的焊接电流测量.测量指南 Resistance
welding - Welding current measurement for resistance
welding - Guidelines for measurement
BS ISO 17657-2-2006 电阻焊.电阻焊的焊接电流测量.带电流感应线圈的焊接电流表
Resistance welding - Welding current measurement
for resistance welding - Welding current meter
with current sensing coil
BS ISO 17657-3-2006 电阻焊.电阻焊的焊接电流测量.电流感应线圈 Resistance
welding - Welding current measurement for resistance
welding - Current sensing coil
BS ISO 17657-4-2006 电阻焊.电阻焊的焊接电流测量.校对系统 Resistance
welding - Welding current measurement for resistance
welding - Calibration system
BS ISO 17657-5-2006 电阻焊.电阻焊的焊接电流测量.验证焊接电流测量系统
Resistance welding - Welding current measurement
for resistance welding - Verification of welding
current measuring system
BS ISO 18172-1-2007 储气瓶.可再充装的焊接不锈钢气瓶.试验压力≤6MPa
Gas cylinders - Refillable welded stainless
steel cylinders - Test pressure 6 MPa and below
BS ISO 18172-2-2007 储气瓶.可再充装的焊接不锈钢气瓶.试验压力≥6MPa
Gas cylinders - Refillable welded stainless
steel cylinders - Test pressure greater than
6 MPa
BS ISO 18207-2006 道路车辆.3.5吨以下拖车在疲劳试验后联轴节球体用焊接牵引支撑架的控制
Road vehicles - Trailers up to 3,5 t. Control
of welded towing brackets for coupling ball
after fatigue testing
BS ISO 20703-2007 储气瓶.可再填充的焊接铝合金气瓶.设计、结构和试验
Gas cylinders - Refillable welded aluminium-alloy
cylinders - Design, construction and testing
BS ISO 22829-2007 电阻焊接.带组合变压器焊接枪用变压器整流器.1000Hz频率工作的变压器整流器
Resistance welding - Transformer-rectifier for
welding guns with integrated transformers -
Transformer-rectifier units operating at 1000
Hz frequency
BS ISO 24394-2008 航空航天设备的焊接.焊接工和焊接操作工认证试验.金属部件的熔焊
Welding for aerospace applications - Qualification
test for welders and welding operators - Fusion
welding of metallic components
BS ISO 24497-3-2007 无损检验.金属磁存储器.焊接接头的检验 Non-destructive
testing - Metal magnetic memory - Inspection
of welded joints
BS ISO 4706-2008 气瓶.可再填充焊接钢瓶.试验压力≤60ba Gas cylinders
- Refillable welded steel cylinders - Test pressure
60 bar and below
BS ISO 6971-2002 焊接结构用弯板拉曳链、附件和链轮 Cranked-link
drag chains of welded construction, attachments
and sprockets
BS ISO 6972-2002 焊接结构工程用弯板链、附件和链轮 Cranked-link
mill chains of welded construction, attachments
and sprockets
BS ISO 857-2-2006 焊接和相关工艺.词汇.软钎焊和铜焊工艺及相关术语 Welding
and allied processes - Vocabulary - Soldering
and brazing processes and related terms
BS L 112-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金锻坯和锻件规范(溶液处理和沉淀处理)(适用于焊接)
Specification for forging stock and forgings
of aluminium-magnesium-silicon-manganese alloy
(solution treated and precipitation treated)
(suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 113-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金薄板材和带材规范(溶液处理和沉淀处理)(适用于焊接)
Specification for sheet and strip of aluminium-magnesium-silicon-manganese
alloy (solution treated and precipitation treated)
(suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 114-1971 铝-镁(0.8)硅(1)-锰(0.7)合金管规范(溶液处理和沉淀处理)(壁厚度小于10mm)(适用于焊接)
Specification for tube of aluminium-magnesium-silicon-manganese
alloy (solution treated and precipitation treated)
(not exceeding 10 mm wall thickness) (suitable
for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 115-1971 铝-镁(0.8)硅(1)-锰(0.7)合金板规范(溶液处理,拉伸控制及沉淀处理)(厚度小于25mm)(适用于焊接)
Specification for plate of aluminium-magnesium-silicon-manganese
alloy (solution treated, controlled stretched
and precipitation treated) (not exceeding 25
mm thickness) (suitable for welding) (Mg 0.8,
Si 1, Mn 0.7)
BS S 164-2002 航空航天系列.1%铬-钼钢坯,棒材,锻件和部件(1150对1300MPa:限制截面部分为16mm)(适用于焊接)
1 % Chromium-molybdenum steel billets, bars,
forgings and parts - (1150 to 1300 MPa: Limiting
ruling section 16 mm) (Suitable for welding)
BS S 534-1969 铬-钼钢薄板材和带材规范(880/1080MPa)(适用于焊接)
Specification for chromium-molybdenum steel
sheet and strip (880/1080 MPa (suitable for
welding)
BS S 535-1969 铬-钼钢薄板材和带材规范(1150/1300MPa)(适用于焊接)
Specification for chromium-molybdenum steel
sheet and strip (1150/1300 Mpa) (suitable for
welding)
BS T 64-1972 碳-锰钢管材规范(550 N/mm<上标2>)(管外径小于12.5mm)(可焊接)
Specification for carbon-manganese steel tube
(550 N/mm2) (tube less than 12.5 mm outside
diameter) (weldable)
BS T 67-1972 18/10铬-镍耐腐蚀钢管材规范(钛稳定的:550 N/mm<上标2>)(可焊接)
Specification for 18/10 chromium-nickel corrosion-resisting
steel tube (titanium stabilized: 550 N/mm2)
(weldable)
BS T 69-1972 冷拉18/10铬-镍耐腐蚀钢管材规范(钛稳定的:800 N/mm<上标2>)(可焊接)
Specification for cold drawn 18/10 chromium-nickel
corrosion-resisting steel tube (titanium stabilized:
800 N/mm2) (weldable)
BS T 76-1978 铬-钼钢管规范(770MPa)(可焊接) Specification
for chromium-molybdenum steel tube (770 MPa)
(weldable)
BS T 77-1980 铬-钼钢管材规范(900MPa)(可焊接) Specification
for chromium-molybdenum steel tube (900 MPa)
(weldable)
DD ENV 10080-1996 混凝土加固用钢材.可焊接的混凝土加强钢筋B500.棒,环盘,已焊过的钢筋网的交货技术状态
Steel for the reinforcement of concrete. Weldable
ribbed reinforcing steel B500. Technical delivery
conditions for bars, coils and welded fabric
DD ENV 10220-1994 无缝钢管和焊接钢管.尺寸及单位长度质量 Seamless
and welded steel tubes. Dimensions and masses
per unit length
PD ISO/TR 17663-2001 焊接.与焊接和相关工艺有关的热处理的质量要求导则
Welding. Guidelines for quality requirements
for heat treatment in connection with welding
and allied processes
德国焊接标准(DIN welding standards)
--------------------------------------------------------------------------------
编号 中文名称 英文名称
DIN 11851-1998 食品,化学和医药工业用管接头.不锈钢制螺纹管连接件.滚压和焊接连接的设计
Fittings for food, chemical and pharmaceutical
industry - Stainless steel screwed pipe connections
- Design for rolling in and welding-on
DIN 11852-2009 食品业、化工业用装置 不锈钢装置 焊接用三通管、弯头和异径接头
Fittings for the food and chemical industries
- Fittings of stainless steel - Tees, bends
and reducers for welding
DIN 11865-2003 无菌、化学工业和药业用不锈钢配件.焊接用三通管、弯头和异径接头
Stainless steels fittings for aseptic, chemical
and pharmaceutical industries - Tees, bends,
reducers for welding on
DIN 11867-2005 无菌、化学和制药工业的生铁系统用弯头、不锈钢焊接管件 Elbows
for pigging systems, welding fittings in stainless
steel, for aseptic, chemical and pharmaceutical
industries
DIN 13972-1-2001 牙科技术.激光焊接过程的质量保证.第1部分:牙科实验室的激光焊接
Dentistry - Quality assurance during laser welding
- Part 1: Laser welding in dental laboratories
DIN 13972-2-2002 牙科学.激光焊接质量保证.第2部分:激光焊接用相同和类似牙科金属材料适用性
Dentistry - Quality assurance during laser welding
- Part 2: Suitability of identical and similar
metallic dental materials for laser welding
DIN 1615-1984 无特殊要求的非合金钢焊接管.交货技术条件 Welded circular
unalloyed steel tubes not subject to special
requirements; technical delivery conditions
DIN 16831-1-2003 聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第1部分:承插焊接用注模肘管尺寸
Pipe fittings and joint assemblies for polybutene
pressure pipes - Type PB 125 - Part 1: Dimensions
of injection-moulded elbows for socket welding
DIN 16831-2-2003 聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第2部分:承插焊接用注模三通管尺寸
Pipe fittings and joint assemblies for polybutene
pressure pipes - Type PB 125 - Part 2: Dimensios
of injection-moulded tees for socket welding
DIN 16831-3-2003 聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第3部分:承插焊接用注模套管和帽.尺寸
Pipe fittings and joint assemblies for polybutene
pressure pipes - Type PB 125 - Part 3: Dimensions
of injection-moulded sockets and caps for socket
welding
DIN 16831-4-2003 聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第4部分:承插焊接用注模异径管尺寸
Pipe fittings and joint assemblies for polybutene
pressure pipes - Type PB 125 - Part 4: Dimensions
of injection-moulded reducers for socket welding
DIN 16831-6-2003 聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第6部分:耐焊接配件尺寸
Pipe fittings and joint assemblies for polybutene
pressure pipes - Type PB 125 - Part 6: Dimensions
of fittings for resistance welding
DIN 16831-7-2004 聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第7部分:承插焊接用套管、法兰和密封环组件的尺寸
Pipe fittings and joint assemblies for polybutene
pressure pipes - Type PB 125 - Part 7: Dimensions
of bushings, flanges and selaing elements for
socket welding
DIN 16960-1-1974 热塑性塑料焊接.第1部分:原则 Welding of
Thermoplastics; Principles
DIN 16962-12-1999 聚丙烯(PP)制压力管道用管连接件和零件.PP-H
100,PP-B 80和PP-R 80.第12部分:承口焊接用凸缘接头、法兰、密 Pipe
joints and components of polypropylene (PP)
for pipes under pressure, PP-H 100, PP-B 80
and PP-R 80 - Part 12: Flange adapters, flanges,
sealing rings for socket welding; dimensions
DIN 16962-6-1980 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑弯头.尺寸
Pipe Joints and Elements for Polypropylene (PP)
Pressure Pipelines, Types 1 and 2; Injection
Moulded Elbows for Socket-welding, Dimensions
DIN 16962-7-1980 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑三通.尺寸
Pipe Joints and Elements for Polypropylene (PP)
Pressure Pipelines, Types 1 and 2; Injection
Moulded Tee Pieces for Socket-welding, Dimensions
DIN 16962-8-1980 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑管套和管帽.尺寸
Pipe Joints and Elements for Polypropylene (PP)
Pressure Pipelines, Types 1 and 2; Injection
Moulded Sockets and Caps for Socket-welding,
Dimensions
DIN 16962-9-1983 1型和2型聚丙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸
Pipe joint assemblies and fittings for types
1 and 2 polypropylene (PP) pressure pipes; injection
moulded reducers and nipples for socket welding;
dimensions
DIN 16963-10-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑套筒与帽盖.尺寸
Pipe Joints and Elements for High Density Polyethylene
(HDPE) Pressure Pipelines, Types 1 and 2; Injection
Moulded Sockets and Caps for Socket-welding,
Dimensions
DIN 16963-11-1999 聚乙烯(PE)制压力管道用管连接件和零件.PE 80和PE
100.第11部分:承口焊接用凸缘接头、法兰、密封圈.尺寸 Pipe joints and
components of polyethylene (PE) for pipes under
pressure, PE 80 and PE 100 - Part 11: Flange
adapters, flanges, sealing rings for socket
welding; dimensions
DIN 16963-14-1983 1型和2型高密度聚乙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸
Pipe joint assemblies and fittings for types
1 and 2 high-density polyethylene (HDPE) pressure
pipes; injection moulded reducers and nipples
for socket welding; dimensions
DIN 16963-7-1989 高密度聚乙烯压力管道用管道连接组件和管道配件.第7部分:电阻焊接配件尺寸
Pipe joint assemblies and fittings for high-density
polyethylene (PE-HD) pressure pipes; fittings
for resistance welding; dimensions
DIN 16963-8-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑弯管.尺寸
Pipe Joints and Elements for High Density Polyethylene
(HDPE) Pressure Pipelines, Types 1 and 2; Injection
Moulded Elbows for Socket-welding, Dimensions
DIN 16963-9-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑三通管件.尺寸
Pipe Joints and Elements for High Density Polyethylene
(HDPE) Pressure Pipelines, Types 1 and 2; Injection
Moulded Tee Pieces for Socket-welding, Dimensions
DIN 17115-1987 焊接的圆形钢链用钢材.交付技术状态 Steels for
welded round link chains; technical delivery
conditions
DIN 17866-1990 钛和钛合金焊接圆形管.交付技术状态 Welded circular
titanium and titanium alloy tubes; technical
delivery conditions
DIN 1910-100-2008 焊接和相关工艺.词汇.第100部分:依据DIN EN
14610-2005的金属焊接工艺 Welding and allied processes
- Vocabulary - Part 100: Metal welding processes
with additions to DIN EN 14610:2005
DIN 1910-11-1979 焊接.金属焊接材料术语 Welding; terms
dependent on materials for metal welding
DIN 1910-3-1977 焊接；塑料的焊接、工艺 Welding; Welding
of Plastics, Processes
DIN 1912-4-1981 焊接、软钎焊和硬钎焊焊口的图形表示法.软钎焊和硬钎焊焊口和焊缝的概念和术语
Graphical Representation of Welded, Soldered
and Brazed Joints; Concepts and Terms for Soldered
and Brazed Joints and Seams
DIN 22261-3-2006 露天褐煤矿挖掘机、排土机和附属设备.第3部分:焊接、连接方式、分类和试验说明
Excavators, spreaders and auxiliary equipment
in opencast lignite mines - Part 3: Welded connections,
joint types, classification, test instruction
DIN 2302-2005 焊接消耗品.非合金和细粒钢的水下高压湿焊用焊接消耗品.水下高压湿焊用焊接消耗品的试验和鉴定的验收规范
Welding consumables - Welding consumables for
underwater hyperbaric wet welding of unalloyed
and fine grain steels - Acceptance specifications
for testing and qualification of welding consumables
for underwater hyperbaric wet welding
DIN 2303-2007 焊接和联合处理.军工产品生产和维修公司的质量要求 Welding
and allied processes - Quality requirements
for production and maintenance companies for
military products
DIN 23319-1990 采矿业中焊接和运输工作用防护隔板 Protective aprons
for welding- and transport-working for the mining
industry
DIN 2353-1998 带环套的非焊接压力连接接头.完全压连接和概述 Non-soldering
compression fittings with cutting ring - Complete
fittings and survey
DIN 2559-3-2007 焊缝预加工.第3部分:焊接管道圆周焊缝的内径配合 Preparation
of joints for welding- Part 3: Matching of inside
diameters for circumferential welds on welded
tubes
DIN 2695-2002 法兰连接用隔板焊接密封件和焊接环形密封件 Diaphragm-weld
packings and weld ring seals for flange connections
DIN 27201-6-2007 铁路车辆的状况.基本原理和生产技术.第6部分:焊接 State
of railway vehicles - Basic principles and production
technology - Part 6: Welding
DIN 28031-2003 非合金钢和不锈钢制非加压容器和加工装置用焊接法兰 Weld
flanges for unpressurized vessels and process
apparatus of non-alloy and stainless steel
DIN 28032-2005 非合金钢制压力容器和加工装置用焊接法兰 Non-alloy
steel weld flanges for pressure vessels and
process apparatus
DIN 28036-2005 不锈钢制压力容器和加工装置用焊接法兰 Weld flanges
for pressure vessels and process apparatus of
stainless steel
DIN 28038-2003 不锈钢制压力容器和加工装置用带圆柱形毂焊接法兰 Weld
flanges with cylindrical hub for pressure vessels
and process apparatus of stainless steel
DIN 28139-1-1985 搪瓷容器的焊接颈.夹紧螺纹接头的H形主法兰.尺寸 Welding
necks for glass lined vessels; form H main flanges
for clamp screw connections; dimensions
DIN 28139-2-1985 搪瓷容器的焊接凸肩.M型人孔、手孔和夹紧螺钉连接的安装孔.连接尺寸
Welding necks for glass lined vessels; form
M manhole, handhole and assembly opening for
clamp screw connections; connecting, dimensions
DIN 28139-3-1985 搪瓷容器的焊接凸肩.分离式搭接法兰连接用S形接管嘴.连接尺寸
Welding necks for glass lined vessels; form
S nozzles for lapped divided flange connections;
connecting dimensions
DIN 28145-1-1999 钢制搪瓷搅拌容器用焊接件.第1部分:标称直径2400-3600mm容器用S形挡板支座.连接尺寸.新设计的交互性
Parts welded to glass lined steel agitator vessels
- Part 1: Support for baffle Form S for vessels
nominal diameter 2400 to 3600 mm; connecting
dimensions; interaktive for new design
DIN 28145-3-1993 搪瓷搅拌容器用焊接件.挂吊耳的位置和尺寸 Parts
welded to glass lined agitator vessels; position
and size of lifting lugs
DIN 28145-4-1993 搪瓷搅拌容器的焊接零件.支撑环 Parts welded
to glass lined agitator vessels; support rings
DIN 28145-5-1995 搪玻璃钢搅拌容器用焊接件.第5部分:底部泄料孔处绝缘接头
Parts welded to glass lined steel agitator vessels
- Part 5: Insulation collar at the bottom discharge
opening
DIN 28145-6-1979 玻璃纤维衬里搅拌容器用焊接件.第6部分:支架 Parts
welded to glass lined agitator vessels; bracket
DIN 28145-8 Bb.1-1993 搪瓷搅拌容器的焊接件.管状和外形支座.支座的制造
Parts welded to glass lined agitator vessels;
tubular and profile supports; construction of
supports
DIN 28145-8-1993 搪瓷搅拌容器的焊接件.管子和外形支座 Parts welded
to glass lined agitator vessels; tubular and
profile support
DIN 28181-2007 管式热交换器的焊接钢管.尺寸和材料 Welded steel
tubes for tubular heat exchangers - Dimensions
and materials
DIN 28190-2009 带焊接浮动头的热交换器.设计实例 Floating head
heat exchanger with welded floating head - Examples
of design
DIN 28460-1987 油罐车用安装法兰.铝管材的焊接法兰 Flanges for
tank trucks; welding flanges for aluminium tubes
DIN 28461-1987 油罐车用安装法兰.钢管材的普通焊接法兰 Flanges for
tank trucks; plain welding flanges for steel
tubes
DIN 2916-1975 无缝和焊接钢管的弯曲半径.设计图表 Bending Radii
for Seamless and Welded Steel Tubes; Design
Sheet
DIN 29595-2007 航空航天焊接法.熔焊金属构件.要求 Welding in
aerospace - Fusion welded metallic components
- Requirements
DIN 29878-2008 航空航天系列.电阻焊接的金属零件.技术规范 Aerospace
series - Resistance welded metal parts - Technical
specification; Text in German and English
DIN 32503-1979 用于焊接、切割和相关工艺的外壳直径为63mm的压力测量仪(
压力表)的保护罩. Protective caps for pressure gauges
with case diameter 63 mm used in welding, cutting
and allied processes
DIN 32509-2009 焊接、切削和相关工艺用手动关闭阀 结构类型、安全要求、试验
Hand-operated shut-off valves for welding, cutting
and allied processes - Type of construction,
safety requirements, tests
DIN 32511-2007 焊接.材料处理用电子束加工方法.加工设备术语 Welding
- Electron beam process for material treatment
- Terms for processes and equipment
DIN 32520-1-1987 焊接图形符号.基本图形符号和原理 Graphical
symbols for welding; basic graphical symbols
and principles
DIN 32520-3-1989 焊接用图形符号.第3部分:电弧焊图形符号 Graphical
symbols for welding; graphical symbols for use
on arc welding equipment
DIN 32525-4-2010 焊接消耗品.用焊接金属试样方法试验焊接消耗品.第4部分:表面加工淬火测定用试件
Welding consumables - Testing of welding consumables
by means of weld metal specimens - Part 4: Test
piece for determining the hardness of surfacing
DIN 32527-2009 焊接,钎焊,硬钎焊,切割及相关工艺的加热.术语和工艺 Heating
for welding, soldering, brazing, cutting and
allied processes - Definitions, processes
DIN 32532-2009 焊接 材料处理用激光束加工方法 加工设备术语 Welding
- Laser beam process for material treatment
- Terms for processes and equipment
DIN 32676-2009 食品业、化工业和制药业用装置 不锈钢管用卡箍连接件 焊接型
Fittings for the food, chemical and pharmaceutical
industries - Clamp connections for stainless
steel tubes - Weld-on type
DIN 3336-1968 带焊接弯管端的加热装置的混合阀.公称压力6、最大使用温度110
℃的三通混合阀、四通混合阀.安装尺寸 Mixing valves for heating
installations with welding neck ends; three
way mixing valves, four way mixing valves, ND
6 max. 110 °C, installation dimensions
DIN 3444-1997 带焊接端和螺纹端的管道部件防护盖 Protective caps
for pipe fittings with welded and threaded ends
DIN 34817-2001 米制螺纹焊接螺钉 Weld screws with metric
thread
DIN 34828-2005 松紧螺套用焊接螺柱 Welding studs for turnbuckles
DIN 3859-2-1999 压力连接管联结器.第2部分:带符合DIN 2353DIN
和 EN ISO 8434-1 的带切断环的非焊接压力连接管联结器的组装 Compression
couplings - Part 2: Assembly instruction for
non-soldering compression couplings with cutting
rings according DIN 2353 and DIN EN ISO 8434-1
DIN 3867-2003 非焊接压紧联轴节.对接结构压紧环 Non-soldering
compression couplings - Pressure bush for butt
joints
DIN 3872-2003 非焊接压紧联轴节.对接结构活接头螺母 Non-soldering
compression couplings - Union nuts for butt
joints
DIN 3900-2001 带有切割环系列LL的非焊接压缩配件.带锥形螺纹的直形末端 Non
soldering compression fittings with cutting
ring series LL - Straight studs with taper thread
DIN 3903-2001 带有切割环的非焊接压缩配件.带锥形螺纹末端的肘形螺栓(不用于新设计)
Non soldering compression fittings with cutting
ring - Elbow stud with taper threaded stud end
(not for new design)
DIN 3906-2001 带有切割环的非焊接压缩配件.带锥形螺纹末端的分支T形螺栓(不用于新设计)
Non soldering compression fittings with cutting
ring - Branch T-stud with taper threaded stud
end (not for new design)
DIN 3913-2001 带有切割环的非焊接压缩配件.带锥形螺纹末端的活动T形螺栓(不用于新设计)
Non soldering compression fittings with cutting
ring - Run T-stud with taper threaded stud end
(not for new design)
DIN 3942-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1
的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 Non-soldered
compression fittings - Swivel elbows with 24°
cone connectors with O-ring - Adjustable, for
design and type of compression end according
to DIN EN ISO 8434-1
DIN 3943-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1
的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 Non-soldered
compression fittings - Swivel branch tees with
24° cone connectors with O-ring - Adjustable,
for design and type of compression end according
to DIN EN ISO 8434-1
DIN 3944-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1
的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 Non-soldered
compression fittings - L-adaptors with 24° cone
connectors and O-ring - Adjustable, for design
and type of compression end according to DIN
EN ISO 8434-1
DIN 3945-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1
的压接端头的设计和定型用带24度锥形联接器和 'O' 型密封圈的直 Non-soldered
compression fittings - Straight stud swivel
adaptor with 24° cone connectors with O-ring
- For design and type of compression end according
to DIN EN ISO 8434-1
DIN 3946-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1
的压接端头的设计和定型用带24度锥形联接器和 'O' 型密封圈的直 Non-soldered
compression fittings - Straight reducing swivel
adaptors with 24° cone connectors with O-ring
- For design and type of compression end according
to DIN EN ISO 8434-1
DIN 3949-1998 非焊接压缩耦合件.根据DIN EN ISO 8434-1压缩端型用喇叭形连接件
Non soldering compression couplings - Flared
connection parts for type of compression end
according to DIN EN ISO 8434-1
DIN 4000-41-1983 焊片、焊接销、接线柱的产品特性图表 Tabular layouts
of article characteristics for solder lugs,
solder pins, soldering terminals
DIN 4000-57-1990 第57部分:焊接、铜焊和钎焊填充金属、焊剂和粘合剂用物品特性表格设计
Tabular layouts of article characteristics for
filler metals for welding, brazing and soldering,
fluxes and adhesives
DIN 4113-2 Berichtigung 1-2008 承受主要静负荷的铝结构.焊接结构的静态分析.技术勘误DIN
4113-2-2002 Aluminium constructions under predominantly
static loading - static analysis of welded constructions,
Corrigenda to DIN 4113-2:2002-09
DIN 4113-2-2002 承受主要静负荷的铝结构.第2部分:焊接结构的静态分析和结构设计
Aluminium constructions under predominantly
static loading - Part 2: Static analysis and
structural design of welded constructions
DIN 41611-9-1987 非焊接的电气连接件.未剥皮线绕线连接件.术语和定义、额定值、要求、检验
Solderless electrical connections; wrapped connections,
without wire stripping; terms and definitions,
ratings, requirements, tests
DIN 41633-1981 直径17mm旋转夹层开关.轴向焊接10和12个位置.尺寸、额定值、要求、检验
Rotary wafer switches 17 mm diameter; 10 and
12 positions axial soldering; dimensions, ratings,
requirements and tests
DIN 41634-1-1976 径向焊接终端直径为 17 mm 的 12 部位旋转式晶片开关.第1部分:主要尺寸
Rotary wafer switches, diameter 17 mm, 12 positions,
radial soldering terminals; main dimensions
DIN 41652-3-1990 φ1mm的圆形触点、梯形机柜连接器.A型结构尺寸.室外布线用钎焊接头
Rack and panel connectors, trapezoidal, round
contacts 1 mm; dimensions of type A; solder
termination for free wiring
DIN 43767-1986 测量和控制.电温度传感器.焊接杆式温度计 Measurement
and control; electrical temperature sensors;
welded-stem thermometers
DIN 44767-1976 200A.550V电阻焊接变压器初级线圈连接装置耦合器 Appliance
Coupling for the Primary Connection of Resistance
Welding Transformers, 200 A 550 V
DIN 44770-1-1982 第1部分:气动焊接汽缸、无缓冲双作用、双活塞连接尺寸
Pneumatic welding cylinder, double acting without
cushion, double piston, connection dimensions
DIN 46230-1980 非焊接接线端.铜导线用无绝缘套管的插针式连接 Terminal
ends for solderless connections; pin type, without
insulating sleeve, for copper conductors
DIN 46231-1970 铜导线用绝缘的非焊接连接的插针式电缆端头 Pin type
cable-sockets for solderless connections, insulated,
for copper conductors
DIN 46234-1980 非焊接接线端.铜导线用无绝缘套管环形连接 Terminal
ends for solderless connections; ring type,
without insulating sleeve, for copper conductors
DIN 46237-1970 铜导线用绝缘非焊接连接的压接电缆端头 Crimp-type
cable sockets for solderless connections, insulated,
for copper conductors
DIN 46341-1-1977 第1部分:铜导线用无绝缘套管的非焊接连接器 Solderless
connectors, without insulating sleeve, for copper
conductors
DIN 47600-3-1974 最高可达 10 kV 电力电缆用金属铸造连接盒.第3部分:用纸质绝缘电缆对连接盒的连接.裸露的绞合铜线焊接的连
Cast Metal Joint Boxes for Power Cables up to
10 kV; Correlation of Joint Boxes with Paper-insulated
Cables; Correlation of Bare Stranded Copper
Bonding Wire
DIN 488-4-2009 钢筋.钢筋焊接网 Reinforcing steels -
Welded fabric
DIN 50915-1993 非合金钢和低合金钢在受到硝酸盐浸蚀作用时的耐晶间应力腐蚀裂纹的检验.焊接和非焊接材料
Testing the resistance of unalloyed and low
alloy steels to intergranular stress corrosion
cracking by attack of nitrate medium; welded
and unwelded materials
DIN 51350-2-2010 润滑剂检测.用四球检测仪检验.第2部分:液体润滑剂焊接承载力的测定
Testing of lubricants - Testing in the four-ball
tester - Part 2: Determination of welding load
of liquid lubricants
DIN 51350-4-1984 润滑剂检验.用壳牌公司的四球试验仪检验.润滑脂焊接载荷的测定
Testing of lubricants; testing by the Shell
four-ball tester; determination of welding load
of consistent lubricants
DIN 525-2009 焊接螺柱 Studs for welding
DIN 54123-1980 无损检验.检验用焊接、滚轧及爆炸形成包覆层的超声波方法 Non-destructive
Test; Ultrasonic Method of Testing Claddings,
Produced by Welding, Rolling and Explosion
DIN 57544-100-1983 电弧焊及类似工艺用焊接设备和组件.操作安全要求(VDE规范)
Welding equipment and assemblies for arc welding
and similar procedures; safety requirements
for operation [VDE Specification]
DIN 57544-101-1983 电弧焊及类似工艺用焊接设备和组件.安装的安全要求(VDE规范)
Welding equipment and assemblies for arc welding
and similar procedures; safety requirements
for installation [VDE Specification]
DIN 65118-1 Bb.1-1991 航空航天.焊接金属部件.第1 Bb 1部分:图纸指示示例
Aerospace; welded metallic components; indications
on drawings; examples
DIN 65118-1-1991 航空航天.焊接金属的组合零件.第1部分:图纸指示 Aerospace;
welded metallic component parts; indications
on drawings
DIN 65118-2-1987 航空和航天.焊接金属元部件.设计指令 Aerospace;
welded metallic components; directives for design
DIN 65470-1989 航空航天.金属材料焊接用焊接填充金属.技术规范 Aerospace;
filler metals for welding metallic materials;
technical specification
DIN 65471-1991 航空航天.钛和钛合金焊接用金属填料.焊条和焊丝.尺寸，质量
Aerospace; filler metals for welding titanium
and titanium alloys; filler rods and filler
wires; dimensions, masses
DIN 72332-1-1977 起动蓄电池用电池接线柱.焊接端子 Cable connectors
for starter batteries; soldering terminals
DIN 72332-2-1983 起动蓄电池用电池电缆接线端子.轻型焊接端子 Battery
cable terminals for starter batteries; light
soldering terminals
DIN 74281-1-2000 气压制动设备.压力容器.第1部分:钢和铝制焊接单室压力容器的度量方法
Air braking systems - Pressure vessels - Part
1: Measures of welded steel and aluminium single
chamber pressure vessels
DIN 74313-1-1994 非焊接压缩管接头.渐缩管.A型和B型 Non-soldering
compression fittings; reducers; type A and B
DIN 74313-2-1994 非焊接压缩管接头.渐缩管.C型和D型 Non-soldering
compression fittings; reducers; type C and D
DIN 7527-5-1972 钢锻件.自由锻造的轧制及焊接圆环的加工余量及允许偏差 Steel
Forgings; Machining Allowances and Permissible
Variations for Open-die Forged Rolled and Welded
Rings
DIN 7637-1985 带球形衬的压接管接头.焊接转接器 Compression fittings
with spherical liners; adaptars for welding
DIN 81421-2-2007 设备的弓形把手.第2部分:焊接类型 Strap-shaped
handles for equipment - Part 2: Type for welding
DIN 8526-1977 钎焊接头检验.接缝钎焊接头、剪切试验、蠕变剪切试验 Testing
of Soldering Joints; Gap Soldered Joints, Shear
Test, Creep Shear Test
DIN 8541-2-1987 焊接、切割和相关工艺用软管.燃料气体、氧气和其它不可燃气体用带外保护套的软管
Hoses for welding, cutting and allied processes;
hoses with protective cover for use with fuel
gas, oxygen and other non-combustible gases
DIN 8541-3-1995 焊接、切割和相关工艺用橡胶软管.第3部分:特殊要求用有涂层和无涂层的氧化橡胶软管.安全要求和检验
Rubber hoses for welding, cutting and allied
processes - Part 3: Oxygen rubber hoses with
and without coatings for special requirements;
safety requirements and testing
DIN 8562-1975 容器的焊接.金属材料容器，焊接原理 Welding of Vessels;
Vessels of Metallic Materials, Principles for
Welding
DIN 8593-6-2003 连接加工工艺.第6部分:焊接.分类、细分类、术语和定义
Manufacturing processes joining - Part 6: Joining
by welding; Classification, subdivision, terms
and definitions
DIN 86015-1991 船舶用带冷焊接点的未增塑的聚氯乙烯(PVC-U)管.应用，加工和敷设
Application and installation of unplasticized
polyvinyl chloride (PVC-U) pipework with cemented
joints on ships
DIN 86028-1997 CuNi10Fe1.6Mn焊接轴颈.交货技术要求 Welding
necks of CuNi10Fe1,6Mn - Technical specifications
DIN 86029-1987 焊接用高颈松套法兰.公称压力10 Hubbed slip-on
flanges for welding; nominal pressure 10
DIN 86030-1987 焊接用高颈松套法兰.公称压力16 Hubbed slip-on
flanges for welding; nominal pressure 16
DIN 86037-1-1995 铜镍合金管道的活套法兰和焊接凸肩.第1部分:组装 Loose
flanges and welding necks for pipes of copper-nickel-alloys
- Part 1: Assembly
DIN 86037-2-1995 铜镍合金管道的活套法兰和焊接凸肩.第2部分:焊接凸肩
Loose flanges and welding necks for pipes of
copper-nickel-alloys - Part 2: Welding necks
DIN 86037-3-1995 铜镍合金管道的活套法兰和焊接凸肩.第3部分:活套法兰
Loose flanges and welding necks for pipes of
copper-nickel-alloys - Part 3: Loose flanges
DIN 86038-3-2000 船舶与海上技术.活动法兰和和超轻型搭接管端.第3部分:只用于焊接DN32-DN125的搭接管端
Ships and marine technology - Loose flanges
and lapped pipe ends extra light duty - Part
3: Lapped pipe ends for but welding DN 32 to
DN 125
DIN 86040-2000 船舶与海上技术.超轻型焊接法兰 Ships and marine
technology - Welding flanges extra light duty
DIN 86041-1-1996 焊接法兰.第1部分:油箱和海水箱.公称压力10和16
Welding Flanges - Part 1: Tanks and sea boxes,
nominal pressure 10 and 16
DIN 86041-2-1996 焊接法兰.第2部分:舷外接头.公称压力10、16、40
Welding flanges - Part 2: Outboard connections,
nominal pressure 10, 16, 40
DIN 86057-1976 管闷头连接件用法兰（套环）的焊接 Welding on flanges
(collars) for bulkhead fittings for pipes
DIN 86066-2002 止回阀用铸钢焊接弯头.根据PN 10的连接尺寸 DN 50至150
Cast steel welding elbows for storm valves -
DN 50 to 150, connecting dimensions according
to PN 10
DIN 86111-1986 充料管与探测管用焊接盖板螺纹盖 Welded-in deck
screw caps for filling and sounding pipes
DIN 86129-1986 充料管和探测管用焊接盖板螺纹盖的螺塞和扁密封圈 Plug
screws and flat sealing rings for welded-in
screw caps for filling and sounding pipes
DIN 86150-1996 管道焊接套管 Welding sockets for pipes
DIN 87721-2-1995 排水旋塞.第2部分:旋塞、焊接板 Drain screws
- Part 2: Screws, welding plates
DIN 8906-1990 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头 PN 40
flared flange solderless compression couplings
for use in refrigerating systems
DIN 8912-1990 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的接头螺母和螺纹堵塞
Coupling nuts and screwed plugs for use with
PN 40 flared flange solderless compression couplings
in refrigerating systems
DIN 8914-1990 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的90°锥体密封环和密封盖
90° tapered seal rings and caps for use with
PN 40 flared flange solderless compression couplings
in refrigerating systems
DIN 928-2000 方形焊接螺母 Square weld nuts
DIN 929-2000 六角焊接螺母 Hexagon weld nuts
DIN CEN/TS 14751-2005 焊接.焊接检验用飞行时间衍射技术的使用 Welding
- Use of time-of-flight diffraction technique
(TOFD) for examination of welds; German version
CEN/TS 14751:2004
DIN EN 10028-3-2009 压力容器用的钢板制品.第3部分:适于焊接的一般退火细颗粒结构钢,EN
10028-3:2009德文版本 Flat products made of steels
for pressure purposes - Part 3: Weldable fine
grain steels, normalized; German version EN
10028-3:2009
DIN EN 10028-5-2009 承压钢扁平轧材.第5部分:热机轧制的可焊接细粒钢.EN
10028-5:2009的英文版本 Flat products made of steels
for pressure purposes - Part 5: Weldable fine
grain steels, thermomechanically rolled; English
version of DIN EN 10028-5:2009-09
DIN EN 10028-6-2009 压力用途的钢板制品.第6部分:可焊接淬火和回火细粒钢
Flat products made of steels for pressure purposes
- Part 6: Weldable fine grain steels, quenched
and tempered; English version of DIN EN 10028-6:2009-09
DIN EN 1011-1-2009 焊接,金属材料焊接推荐.第1部分:电弧焊接的一般指南,英文版本DIN
EN 1011-1:2009-07 Welding - Recommendations
for welding of metallic materials - Part 1:
General guidance for arc welding; English version
of DIN EN 1011-1:2009-07
DIN EN 1011-2-2001 焊接.焊接金属材料推荐标准.第2部分:铁素体钢电弧焊
Welding - Recommendation for welding of metallic
materials - Part 2: Arc welding of ferritic
steels; German version EN 1011-2:2001
DIN EN 1011-3-2001 焊接.焊接金属材料推荐标准.第3部分:不锈钢电弧焊
Welding - Recommendations for welding of metallic
materials - Part 3: Arc welding of stainless
steels; German version EN 1011-3:2000
DIN EN 1011-4-2001 焊接.焊接金属材料推荐标准.第4部分:铝和铝合金电弧焊
Welding - Recommendations for welding of metallic
materials - Part 4: Arc welding of aluminium
and aluminium alloys; German version EN 1011-4:2000
DIN EN 1011-5-2003 焊接.金属材料焊接的推荐规范.第5部分:包层钢的焊接
Welding - Recommendations for welding of metallic
materials - Part 5: Welding of clad steel; German
version EN 1011-5:2003
DIN EN 1011-6-2006 焊接.金属材料焊接的推荐标准.第6部分:激光射线焊接.德文版本EN
1011-6-2005 Welding - Recommendation for welding
of metallic materials - Part 6: Laser beam welding;
English version of DIN EN 1011-6:2006-03
DIN EN 1011-7-2004 焊接.焊接金属材料的建议.第7部分:电子束焊接 Welding
- Recommendations for welding of metallic materials
- Part 7: Electron beam welding; German version
EN 1011-7:2004
DIN EN 1011-8-2005 焊接.金属材料的焊接建议.第8部分:铸铁的焊接 Welding
- Recommendations for welding of metallic materials
- Part 8: Welding of cast irons; German version
EN 1011-8:2004
DIN EN 10120-2008 焊接气罐薄钢板材和带材 Steel sheet and
strip for welded gas cylinders; German version
EN 10120:2008
DIN EN 10217-1-2005 压力用途焊接钢管.交货技术条件.第1部分:具有室温下规定性能的非合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 1: Non-alloy steel
tubes with specified room temperature properties;
German version EN 10217-1:2002 + A1:2005
DIN EN 10217-2-2005 压力用途焊接钢管.交货技术条件.第2部分:具有较高温度下规定性能的电焊非合金和合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 2: Electric welded
non-alloy and alloy steel tubes with specified
elevated temperature properties; German version
EN 10217-2:2002 + A1:2005
DIN EN 10217-3-2005 压力用途焊接钢管.交货技术条件.第3部分:细粒合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 3: Alloy fine grain
steel tubes; German version EN 10217-3:2002
+ A1:2005
DIN EN 10217-4-2005 压力用途焊接钢管.交货技术条件.第4部分:具有低温下规定性能的电焊非合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 4: Electric welded
non-alloy steel tubes with specified low temperature
properties; German version EN 10217-4:2002 +
A1:2005
DIN EN 10217-5-2005 压力用途焊接钢管.交货技术条件.第5部分:具有较高温度下规定性能的埋弧焊接非合金和合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 5: Submerged arc
welded non-alloy and alloy steel tubes with
specified elevated temperature properties; German
version EN 10217-5:2002 + A1:2005
DIN EN 10217-6-2005 压力用途焊接钢管.交货技术条件.第6部分:具有低温下规定性能的埋弧焊接非合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 6: Submerged arc
welded non-alloy steel tubes with specified
low temperature properties; German version EN
10217-6:2002 + A1:2005
DIN EN 10217-7-2005 压力用途焊接钢管.交货技术条件.第7部分:不锈钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 7: Stainless steel
tubes; German version EN 10217-7:2005
DIN EN 10219-1-2006 非合金钢和细晶粒钢的冷成形焊接空心结构型材.第1部分:交货技术要求
Cold formed welded structural hollow sections
of non-alloy and fine grain steels - Part 1:
Technical delivery conditions; English version
of DIN EN 10219-1:2006-07
DIN EN 10220-2003 无缝和焊接钢管.单位长度尺寸重量通用表 Seamless
and welded steel tubes - Dimensions and masses
per unit length; German version EN 10220:2002
DIN EN 10222-4-2001 压力容器用钢锻件.第4部分:高弹限强度可焊接细晶粒钢
Steel forgings for pressure purposes - Part
4: Weldable fine grain steels with high proof
strength (includes Amendment A1:2001); German
version EN 10222-4:1998 + A1:2001
DIN EN 10223-4-1998 栅栏用钢丝和钢丝制品.第4部分:钢丝焊接的格网栅栏
Steel wire and wire products for fences - Part
4: Steel wire welded mesh fencing; German version
EN 10223-4:1998
DIN EN 10223-7-2003 电子篱笆用钢丝和钢丝制品.第7部分:电子篱笆用钢丝焊接面板;
德文版本 EN 10223-7:2002 Steel wire and wire products
for fences - Part 7: Steel wire welded panels
for fencing; German version EN 10223-7:2002
DIN EN 10225-2009 固定式近海结构的可焊接结构钢.技术交付条件,德文版本EN
10225:2009 Weldable structural steels for fixed
offshore structures - Technical delivery conditions;
English version of DIN EN 10225:2009-10
DIN EN 10246-1-1996 钢管无损检测.第1部分:无缝和焊接钢管(埋弧焊除外)密封性自动电磁检验
Non-destructive testing of steel tubes - Part
1: Automatic electromagnetic testing of seamless
and welded (except submerged arc-welded) ferromagnetic
steel tubes for verification of hydraulic leak-tightness;
German version EN 10246-1:1996
DIN EN 10246-10-2000 钢管的无损检验.第10部分:缺陷探测用自动熔融电弧焊接钢管焊缝的射线照相检验
Non-destructive testing of steel tubes - Part
10: Radiographic testing of the weld seam of
automatic fusion arc welded steel tubes for
the detection of imperfections; German version
EN 10246-10:2000
DIN EN 10246-11-2000 钢管的无损检验.第11部分:表面缺陷探测用的无缝和焊接钢管的液体渗透试验
Non-destructive testing of steel tubes - Part
11: Liquid penetrant testing of seamless and
welded steel tubes for the detection of surface
imperfections; German version EN 10246-11:2000
DIN EN 10246-12-2000 钢管的无损检验.第12部分:表面缺陷探测用无缝和焊接铁磁钢管的磁力探伤
Non-destructive testing of steel tubes - Part
12: Magnetic particle inspection of seamless
and welded ferromagnetic steel tubes for the
detection of surface imperfections; German version
EN 10246-12:2000
DIN EN 10246-13-2000 钢管的无损检验.第13部分:无缝和焊接(埋弧焊除外)钢管的自动全周超声波测厚检验
Non-destructive testing of steel tubes - Part
13: Automatic full peripheral ultrasonic thickness
testing of seamless and welded (except submerged
arc welded) steel tubes; German version EN 10246-13:2000
DIN EN 10246-14-2000 钢管的无损试验.第14部分:无缝和焊接钢管(埋弧焊接除外)叠层缺陷检测的自动超声波试验.德文版本EN
10246-14 Non-destructive testing of steel tubes
- Part 14: Automatic ultrasonic testing of seamless
and welded (except submerged arc-welded) steel
tubes for the detection of laminar imperfections;
German version EN 10246-14:1999
DIN EN 10246-15-2000 钢管的无损检验.第15部分:生产焊接钢管用带材/板材的层状缺陷的自动超声波检验
Non-destructive testing of steel tubes - Part
15: Automatic ultrasonic testing of strip/plate
used in the manufacture of welded steel tubes
for the detection of laminar imperfections;
German version EN 10246-15:2000
DIN EN 10246-16-2000 钢管的无损检验.第16部分:层状缺陷检测用焊接钢管焊缝临近区域的自动超声波检验
Non-destructive testing of steel tubes - Part
16: Automatic ultrasonic testing of the area
adjacent to the weld seam of welded steel tubes
for the detection of laminar imperfections;
German version EN 10246-16:2000
DIN EN 10246-17-2000 钢管的无损检验.第17部分:层状缺陷检测用无缝和焊接钢管管端的超声波检验
Non-destructive testing of steel tubes - Part
17: Ultrasonic testing of tube ends of seamless
and welded steel tubes for the detection of
laminar imperfections; German version EN 10246-17:2000
DIN EN 10246-18-2000 钢管的无损检验.第18部分:层状缺陷检测用无缝和焊接铁磁钢管管端的磁力探伤
Non-destructive testing of steel tubes - Part
18: Magnetic particle inspection of the tube
ends of seamless and welded ferromagnetic steel
tubes for the detection of laminar imperfections;
German version EN 10246-18:2000
DIN EN 10246-2-2000 钢管的无损检验.第2部分:证明液压渗漏密封性的无缝和焊接(埋弧焊接除外)的奥氏体和铁素体/奥氏体钢管的自动
Non-destructive testing of steel tubes - Part
2: Automatic eddy current testing of seamless
and welded (except submerged arc-welded) austenitic
and ferritic-austenitic steel tubes for verification
of hydraulic leak-tightness; German version
EN 10246-2:2000
DIN EN 10246-3-2000 钢管的无损检验.第3部分:无缝和焊接钢管(埋弧焊接除外)缺陷检测的自动涡流试验.德文版本EN10246-3:1999
Non-destructive testing of steel tubes - Part
3: Automatic eddy current testing of seamless
and welded (except submerged arc-welded) steel
tubes for the detection of imperfections; German
version EN 10246-3:1999
DIN EN 10246-5-2000 钢管的无损检验.第5部分：铁磁无缝和焊接(埋弧焊接除外)钢管的纵向缺陷检测用自动全外周磁换能器检验/磁漏
Non-destructive testing of steel tubes - Part
5: Automatic full peripheral magnetic transducer/flux
leakage testing of seamless and welded (except
submerged arc-welded) ferromagnetic steel tubes
for the detection of longitudinal imperfections;
German version EN 10246-5:1999
DIN EN 10246-7-2005 钢管的无损检验.第7部分:无缝和焊接钢管(埋弧焊除外)纵向缺陷检测用全圆周自动超声波检验
Non-destructive testing of steel tubes - Part
7: Automatic full peripheral ultrasonic testing
of seamless and welded (except submerged arc
welded) tubes for the detection of longitudinal
imperfections; GEnglish version of DIN EN 10246-7:2005
DIN EN 10255-2007 适合焊接和车螺纹的非合金钢管.交货技术条件 Non-Alloy
steel tubes suitable for welding and threading
- Technical delivery conditions(includes Amendment
A1:2007); English version of DIN EN 10255:2007-07
DIN EN 10296-1-2004 机械工程和一般工程用焊接圆钢管.交货技术条件.第1部分:非合金及合金钢管
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Part 1: Non-alloy and alloy steel
tubes; German version EN 10296-1:2002
DIN EN 10296-2 Berichtigung 1-2007 机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢.DIN
EN 10296-2-2006技术勘误 Welded circular steel tubes
for mechanical and general engineering purposes
- Technical delivery conditions - Part 2: Stainless
steel; German version EN 10296-2:2005, Corrigenda
to DIN EN 10296-2:2006-02; German version EN
10296-2:2005/AC:2007
DIN EN 10296-2-2006 机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢.德文版本
EN 10296-2-2005 Welded circular steel tubes
for mechanical and general engineering purposes
- Technical delivery conditions - Part 2: Stainless
steel; English version of DIN EN 10296-2:2006-02
DIN EN 10305-2-2010 精密装置用钢管.交货技术条件.第2部分:焊接冷拉管.德文版本
EN 10305-2-2010 Steel tubes for precision applications
- Technical delivery conditions - Part 2: Welded
cold drawn tubes; German version EN 10305-2:2010
DIN EN 10305-3-2010 精密装置用钢管.交货技术条件.第3部分:焊接冷分级管
Steel tubes for precision applications - Technical
delivery conditions - Part 3: Welded cold sized
tubes; German version EN 10305-3:2010
DIN EN 10305-5-2010 精密仪器用钢管.交货技术条件.第5部分:焊接冷精加工方形和矩形管材.德文版本EN
10305-5:2010 Steel tubes for precision applications
- Technical delivery conditions - Part 5: Welded
cold sized square and rectangular tubes; German
version EN 10305-5:2010
DIN EN 10305-6-2005 精密仪器用钢管.交货技术条件.第6部分:液压和气动动力系统用焊接冷拉管材
Steel tubes for precision applications - Technical
delivery conditions - Part 6: Welded cold drawn
tubes for hydraulic and pneumatic power systems;
German version EN 10305-6:2005
DIN EN 10312-2005 水和其他水成液输送用焊接不锈钢管.交货技术条件 Welded
stainless steel tubes for the conveyance of
water and other aqueous liquids - Technical
delivery conditions; English version of DIN
EN 10312:2002 + A1:2005
DIN EN 1043-1-1996 金属材料焊接破坏试验.硬度试验.第1部分:电弧焊接缝硬度试验
Destructive test on welds in metallic materials
- Hardness testing - Part 1: Hardness test on
arc welded joints; German version EN 1043-1:1995
DIN EN 1043-2-1996 金属材料焊缝破坏试验.硬度试验.第2部分:焊接接缝显微硬度试验
Destructive test on welds in metallic materials
- Hardness test - Part 2: Micro hardness testing
on welded joints; German version EN 1043-2:1996
DIN EN 1044-1999 硬焊接.填充材料 Brazing - Filler metals;
German version EN 1044:1999
DIN EN 1123-1-2004 污水系统用带套管和孔座的纵向焊接热浸镀锌钢管及配件.第1部分:要求、检验和质量控制
Pipes and fittings of longitudinally welded
hot-dip galvanized steel pipes with spigot and
socket for waste water systems - Part 1: Requirements,
testing, quality control; German version EN
1123-1:1999 + A1:2004
DIN EN 1123-2-2007 废水系统用带龙头和套管的纵向焊接热浸镀锌钢管的管道和配件.第2部分:尺寸
Pipes and fittings of longitudinally welded
hot-dip galvanized steel tube with spigot and
socket for waste water systems - Part 2: Dimensions;
German version EN 1123-2:2006+A1:2007
DIN EN 1123-3-2005 废水系统用带插接套的长焊缝焊接热浸镀锌钢管制管道和管件.第3部分:真空排水系统和船上排水系统的尺寸和特
Pipes and fittings of longitudinally welded
hot-dip galvanized steel pipes with spigot and
socket for waste water systems - Part 3: Dimensions
and special requirements for vacuum drainage
systems and for drainage systems in ship-building;
German version EN 1123-3:2004
DIN EN 1124-1 Berichtigung 1-2006 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、试验和质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 1: Requirements,
testing, quality control; German version EN
1124-1:1999 + A1:2004, Corrigenda to DIN EN
1124-1:2004-12
DIN EN 1124-1-2004 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、检验和质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 1: Requirements,
testing, quality control; German version EN
1124-1:1999 + A1:2004
DIN EN 1124-2-2008 废水系统用插接式纵向焊接不锈钢管和配件.第2部分:S系统.尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 2: System S -
Dimensions; English version of DIN EN 1124-2:2008-02
DIN EN 1124-3-2009 废水系统用带套管和座孔的纵向焊接不锈钢管和配件.第3部分:X系统.尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 3: System X -
Dimensions; German version EN 1124-3:2008
DIN EN 1124-4-2005 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统用元件
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 4: Components
for vacuum drainage systems and for drainage
systems on ships; English version of DIN EN
1124-4
DIN EN 12074-2000 焊接耗材.焊接和相关工艺用耗材的生产、供应和分销的质量要求
Welding consumables - Quality requirements for
manufacture, supply and distribution of consumables
for welding and allied processes; German version
EN 12074:2000
DIN EN 12493-2008 液化石油气(LPG)设备和附件.液化石油气(LPG)用焊接钢罐.油槽车的设计和生产
LPG equipment and accessories - Welded steel
tanks for liquefied petroleum gas (LPG) - Road
tankers design and manufacture; English version
of DIN EN 12493:2008-06
DIN EN 12517-1-2006 焊接连接的无损试验.第1部分:通过X光透视评定钢、镍、钛及其合金焊接接头.允许极限
Non-destructive testing of welds - Part 1: Evaluation
of welded joints in steel, nickel, titanium
and their alloys by radiography - Acceptance
levels; English version of DIN EN 12517-1:2006-06
DIN EN 12517-2-2008 接头的无损检验.第2部分:通过射线照相术评估铝及铝合金的焊接接头.验收等级
Non-destructive testing of welds - Part 2: Evaluation
of welded joints in aluminium and its alloys
by radiography - Acceptance levels; English
version of DIN EN 12517-2:2008-12
DIN EN 12536-2000 焊接耗材.非合金钢和抗蠕变钢的气体焊接用焊条.分类
Welding consumables - Rods for gas welding of
non alloy and creep-resisting steels - Classification;
German version EN 12536:2000
DIN EN 1254-1-1998 铜和铜合金.管配件.第1部分:紧隙钎焊和紧隙铜焊用的焊接到铜管上的带端部管配件
Copper and copper alloys - Plumbing fittings
- Part 1: Fittings with ends for capillary soldering
or capillary brazing to copper tubes; German
version EN 1254-1:1998
DIN EN 1254-5-1998 铜和铜合金.管配件.第5部分:紧隙铜焊用的焊接到铜管上的带短端部管配件
Copper and copper alloys - Plumbing fittings
- Part 5: Fittings with short ends for capillary
brazing to copper tubes; German version EN 1254-5:1998
DIN EN 12542-2005 地上设备用储存容量不超过13M<(hoch)3>的系列生产的液化石油气储存用固定焊接的圆柱形钢罐.设计和制造
Static welded steel cylindrical tanks, serially
produced for the storage of Liquefied Petroleum
Gas (LPG) having a volume not greater than 13
m<(hoch)3> and for installation above
ground - Design and manufacture; German version
EN 12542:2002 + A1:2004
DIN EN 1256-2008 气焊设备.焊接、切割和相关工艺设备的软管组件用规范 Gas
welding equipment - Specification for hose assemblies
for equipment for welding, cutting and allied
processes; English version of DIN EN 1256:2008-03
DIN EN 12573-1-2000 焊接非承压热塑固定槽罐.第1部分:总则 Welded
static non-pressurised thermoplastic tanks -
Part 1: General principles; German version EN
12573-1:2000
DIN EN 12573-2-2000 焊接固定无压力热塑性塑料槽罐.第2部分:立式圆柱形槽罐的计算
Welded static non-pressurised thermoplastic
tanks - Part 2: Calculation of vertical cylindrical
tanks; German version EN 12573-2:2000
DIN EN 12573-3-2000 焊接非承压热塑固定槽罐.第3部分:单层壁长方形槽罐的设计和计算
Welded static non-pressurized thermoplastic
tanks - Part 3: Design and calculation for single
skin rectangular tanks; German version EN 12573-3:2000
DIN EN 12573-4-2000 焊接非承压热塑固定槽罐.第4部分:法兰连接的设计和计算
Welded static non-pressurised thermoplastic
tanks - Part 4: Design and calculation of flanged
joints; German version EN 12573-4:2000
DIN EN 12732-2000 燃气供应系统.焊接钢管.功能要求 Gas supply
systems - Welding steel pipework - Functional
requirements; German version EN 12732:2000
DIN EN 12760-1999 阀门.钢阀门的承口焊接端头 Valves - Socket
welding ends for steel valves; German version
EN 12760:1999
DIN EN 12797-2000 钎焊.钎焊接头的破坏试验 Brazing - Destructive
tests of brazed joints; German version EN 12797:2000
DIN EN 12799-2000 钎焊.钎焊接头的无损检验 Brazing - Non-destructive
examination of brazed joints; German version
EN 12799:2000
DIN EN 12814-1-1999 热塑性塑料半成品焊接接头的试验.第1部分:弯曲试验
Testing of welded joints of thermoplastics semi-finished
products - Part 1: Bend test; German version
EN 12814-1:1999
DIN EN 12814-2-2000 热塑性塑料半成品的焊接接头试验.第2部分:拉伸试验.德文版本EN
12814-2:2000 Testing of welded joints of thermoplastics
semi-finished products - Part 2: Tensile test;
German version EN 12814-2:2000
DIN EN 12814-3-2005 热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验
Testing of welded joints of thermoplastics semi-finished
products - Part 3: Tensile creep test (including
amendment A1:2005); English version of DIN EN
12814-3:2000 + A1:2005
DIN EN 12814-4-2001 热塑性半成品焊接接头试验.第4部分:剥离试验 Testing
of welded joints of thermoplastics semi-finished
products - Part 4: Peel test; German version
EN 12814-4:2001
DIN EN 12814-5-2000 热塑性塑料半成品的焊接接头试验.第5部分:宏观检查
Testing of welded joints of thermoplastics semi-finished
products - Part 5: Macroscopic examination;
German version EN 12814-5:2000
DIN EN 12814-6-2000 热塑性塑料半成品的焊接接头试验.第6部分:低温拉伸试验
Testing of welded joints of thermoplastics semi-finished
products - Part 6: Low temperature tensile test;
German version EN 12814-6:2000
DIN EN 12814-7-2003 热塑半成品焊接接头试验.第7部分:腰形试验样品抗拉试验
Testing of welded joints of thermoplastics semi-finished
products - Part 7: Tensile test with waisted
test specimens; German version EN 12814-7:2002
DIN EN 12814-8 Berichtigung 1-2004 热塑性半成品焊接接头的检验.第8部分:要求
Testing of welded joints of thermoplastic semi-finished
products - Part 8: Requirements; German version
EN 12814-8:2001
DIN EN 12814-8-2001 热塑性半成品焊接接头试验.第8部分:要求 Testing
of welded joints of thermoplastic semi-finished
products - Part 8: Requirements; German version
EN 12814-8:2001
DIN EN 12862-2000 可运输气瓶.可再充气可运输的焊接铝合金气瓶的设计和制造规范
Transportable gas cylinders - Specification
for the design and construction of refillable
transportable welded aluminium alloy gas cylinders;
German version EN 12862:2000
DIN EN 12982-2009 工业阀门.铰链焊接端阀门端对端和中心对末端尺寸,德文版本
EN 12982:2009 Industrial valves - End-to-end
and centre-to-end dimensions for butt welding
end valves; English version of DIN EN 12982:2009
DIN EN 13067-2003 塑料焊接人员.焊工的合格测试.热塑性塑料焊接组件 Plastics
welding personnel - Approval testing of welders
- Thermoplastics welded assemblies; German version
EN 13067:2003
DIN EN 13100-1-2000 热塑性塑料半成品焊接接头的无损检验.第1部分:外观检验
Non destructive testing of welded joints of
thermoplastics semi-finished products - Part
1: Visual examination; German version EN 13100-1:1999
DIN EN 13100-2-2005 热塑性半成品焊接接头的无损检验.第2部分:X射线照相检验
Non-destructive testing of welded joints of
thermoplastics semi-finished products - Part
2: X-ray radiographic testing; German version
EN 13100-2:2004
DIN EN 13100-3-2005 热塑性半成品焊接接头的无损检验.第3部分:超声检验
Non-destructive testing of welded joints in
thermoplastics semi-finished products - Part
3: Ultrasonic testing; German version EN 13100-3:2004
DIN EN 13110-2003 可运输可灌装液化石油气焊接铝瓶.设计和制造 Transportable
refillable welded aluminium cylinders for liquefied
petroleum gas (LPG) - Design and construction;
German version EN 13110:2002
DIN EN 1327-1996 气焊机.焊接及相关工艺用热塑软管 Gas welding
equipment - Thermoplastic hoses for welding
and allied processes; German version EN 1327:1996
DIN EN 13322-1 Berichtigung 1-2009 可运输气瓶.可再灌充焊接钢制气瓶.设计和结构.第1部分:碳钢.技术勘误DIN
EN 13322-1-2006-05 Transportable gas cylinders
- Refillable welded steel gas cylinders - Design
and construction - Part 1: Carbon steel; German
version EN 13322-1:2003 + A1:2006, Corrigendum
to DIN EN 13322-1:2006-05
DIN EN 13322-1-2006 可运输的气瓶.可再填充的焊接钢气瓶.设计和制造.第1部分:碳钢
Transportable gas cylinders - Refillable welded
steel gas cylinders - Design and construction
- Part 1: Carbon steel (includes Amendment A1:2006)
English version of DIN EN 13322-1:2006-05
DIN EN 13322-2-2006 可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第2部分:不锈钢
Transportable gas cylinders - Refillable welded
steel gas cylinders - Design and construction
- Part 2: Stainless steel(includes Amendment
A1:2006); English version of DIN EN 13322-2:2006-10
DIN EN 13347-2003 铜和铜合金.焊接和铜焊用铜棒和铜丝 Copper and
copper alloys - Rod and wire for welding and
braze welding; German version EN 13347:2002
DIN EN 13479-2005 焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准
Welding consumables - General product standard
for filler metals and fluxes for fusion welding
of metallic materials; German version EN 13479:2004
DIN EN 13705-2004 热塑性材料焊接.热气焊机械和设备(包括挤焊) Welding
of thermoplastics - Machines and equipment for
hot gas welding (including extrusion welding);
German version EN 13705:2004
DIN EN 14075-2005 地下设备用储量不大于13 m<(hoch)3>的连续生产的液化石油气储存用固定焊接圆柱形钢罐.设计和制造
Static welded steel cylindrical tanks, serially
produced for the storage of Liquefied Petroleum
Gas (LPG) having a volume not greater than 13
m<(hoch)3> and for installation underground
- Design and manufacture; German version EN
14075:2002 +A1:2004
DIN EN 14140-2007 液化石油气(LPG)设备和组件.液化石油气(LPG)用可移动再填充焊接钢瓶.替代设计和结构
LPG equipment and accessories - Transportable
refillable welded steel cylinders for LPG -
Alternative design and construction English
version of DIN EN 14140:2007-03
DIN EN 14163 Berichtigung 1-2006 石油和天然气工业.管道运输系统.管道焊接
Petroleum and natural gas industries - Pipeline
transportation systems - Welding of pipelines
(ISO 13847:2000, modified); German version EN
14163:2001, text german and english, Corrigenda
to DIN EN 14163:2002-09; German and English
version EN 14163:2001/AC:2006
DIN EN 14163-2002 石油工业和天然气工业.管道输送系统.管路焊接 (ISO
13847:2000, 修订版); 德文版本 EN 14163:2001、德文和 Petroleum
and natural gas industries - Pipeline transportation
systems - Welding of pipelines (ISO 13847:2000,
modified); German version EN 14163:2001, text
German and English
DIN EN 1418-1998 焊接操作人员.全机加工的和自动焊接金属材料的熔焊和电阻焊装置操作员的批准试验
Welding personnel - Approval testing of welding
operators for fusion welding and resistance
weld setters for fully mechanized and automatic
welding of metallic materials; German version
EN 1418:1997
DIN EN 14208-2004 可运输气瓶.气体运输用容量在1000升及以下的焊接压力鼓形物的规范
Transportable gas cylinders - Specification
for welded pressure drums up to 1000 litre capacity
for the transport of gases - Design and construction;
German version EN 14208:2004
DIN EN 14286-2008 铝和铝合金.危险货物的储存和运输用罐的可焊接轧制品
Aluminium and aluminium alloys - Weldable rolled
products for tanks for the storage and transportation
of dangerous goods; German version EN 14286:2008
DIN EN 1435-2002 焊缝的无损检验.焊接接头的X光照相检验; 德文版本 EN
1435:1997 + A1:2002 Non-destructive testing
of welds - Radiographic testing of welded joints;
German version EN 1435:1997 + A1:2002
DIN EN 1442-2008 液化石油气(LPG)设备和附件.液化石油气(LPG)用可运输可再灌装的焊接钢瓶.设计和结构
LPG equipment and accessories - Transportable
refillable welded steel cylinders for LPG -
Design and construction(includes Amendment A1:2008);
English version of DIN EN 1442:2008-04
DIN EN 14532-1-2005 焊接消耗品.试验方法和质量要求.第1部分:钢、镍和镍合金用消耗品的基本方法和合格评定
Welding consumables - Test methods and quality
requirements - Part 1: Primary methods and conformity
assessment of consumables for steel, nickel
and nickel alloys; German version EN 14532-1:2004
DIN EN 14532-2-2005 焊接消耗品.试验方法和质量要求.第2部分:钢、镍和镍合金用消耗品的补充方法和合格评定
Welding consumables - Test methods and quality
requirements - Part 2: Supplementary methods
and conformity assessment of consumables for
steel, nickel and nickel alloys; German version
EN 14532-2:2004
DIN EN 14532-3-2005 焊接消耗品.试验方法和质量要求.第3部分:铝合金焊接用焊丝电极、焊丝和焊棒的合格评定
Welding consumables - Test methods and quality
requirements - Part 3: Conformity assessment
of wire electrodes, wires and rods for welding
of aluminium alloys; German version EN 14532-3:2004
DIN EN 14587-2-2009 铁路应用轨道.钢轨的闪光对接焊.通过不同于固定厂房场地的移动焊接机械的新R220,R260,R260Mn和R350HT级钢轨
Railway applications - Track - Flash butt welding
of rails - Part 2: New R220, R260, R260Mn and
R350HT grade rails by mobile welding machines
at sites other than a fixed plant; English version
of DIN EN 14587-2:2009-08
DIN EN 14610-2005 焊接和相关工艺.金属焊接工艺的定义 Welding
and allied processes - Definitions of metal
welding processes; Trilingual version EN 14610:2004
DIN EN 14638-1-2006 可运输的气瓶.容量不超过150升的可再充气焊接容器.第1部分:焊接奥氏体的试验方法证明设计的不锈钢气瓶
Transportable gas cylinders - Refillable welded
receptacles of a capacity not exceeding 150
litres - Part 1: Welded austenitic stainless
steel cylinders made to a design justified by
experimental methods; English version of DIN
EN 14638-1:2006-07
DIN EN 14700-2005 焊接消耗品.表面硬化焊接消耗品 Welding consumables
- Welding consumables for hard-facing; German
version EN 14700:2005
DIN EN 14717-2005 焊接和相关工艺.环境检查表 Welding and
allied processes - Environmental check list;
German version EN 14717:2005
DIN EN 14728-2005 热塑焊接缺陷.分类 Imperfections in
thermoplastic welds - Classification; German
version EN 14728:2005
DIN EN 14730-1-2006 道路设施.铁轨.铁轨的热铝焊接.第1部分:验收焊接程序
Railway applications - Track - Aluminothermic
welding of rails - Part 1: Approval of welding
processes; English version of DIN EN 14730-1:2006-10
DIN EN 14730-2-2006 道路设施.铁轨.铁轨的热铝焊接.第2部分:热铝焊接工资格、合同验收和确认焊接
Railway applications - Track - Aluminothermic
welding of rails - Part 2: Qualification of
aluminothermic welders, approval of contractors
and acceptance of welds; English version of
DIN EN 14730-2:2006-10
DIN EN 14876-2007 可运输气瓶.焊接钢压力气罐的周期检测和试验 Transportable
gas cylinders - Periodic inspection and testing
of welded steel pressure drums; English version
of DIN EN 14876:2007-04
DIN EN 14893-2006 LPG设备和组件.容积在150升和1000升之间的可运输液化石油气(LPG)焊接钢压力鼓
LPG equipment and accessories - Transportable
Liquefied Petroleum Gas (LPG) welded steel pressure
drums with a capacity between 150 litres and
1000 litres; English version of DIN EN 14893:2006-10
DIN EN 15085-1-2008 铁路设施.铁路车辆和部件的焊接法.第1部分:总则
Railway applications - Welding of railway vehicles
and components - Part 1: General; English version
of DIN EN 15085-1:2008-01
DIN EN 15085-2-2008 铁路设施.铁路车辆和组件的焊接.第2部分:焊接厂商的质量要求和合格证
Railway applications - Welding of railway vehicles
and components - Part 2: Quality requirements
and certification of welding manufacturer; English
version of DIN EN 15085-2:2008-01
DIN EN 15085-3-2010 铁路设施.铁路车辆和组件的焊接.第3部分:设计要求.德文版本DIN
EN 15085-3-2007 Railway applications - Welding
of railway vehicles and components - Part 3:
Design requirements; German version EN 15085-3:2007
DIN EN 15085-4-2008 铁路设施.铁路车辆和组件的焊接.第4部分:生产要求
Railway applications - Welding of railway vehicles
and components - Part 4: Production requirements;
English version of DIN EN 15085-4:2008-01
DIN EN 15085-5-2008 铁路设施.铁路车辆和组件的焊接.第5部分:检验、测试和文献
Railway applications - Welding of railway vehicles
and components - Part 5: Inspection, testing
and documentation; English version of DIN EN
15085-5:2008-01
DIN EN 15385-2007 包装.柔性叠层管.测定头部焊接强度的试验方法 Packaging
- Flexible laminate tubes - Test methods to
determine the strength of the head welding;
English version of DIN EN 15385:2007-11
DIN EN 1598-2002 焊接和相关工艺的健康保护和安全性.电弧焊工艺用透明焊接隔板、板条和屏帘
(包括修改件A1:2001); 德文版本 Health and safety in welding
and allied processes - Transparent welding curtains,
strips and screens for arc welding processes
(includes Amendment A1:2001); German version
EN 1598:1997 + A1:2001
DIN EN 169-2003 人眼防护.焊接及相关技术用滤光镜.透射要求和推荐用途 Personal
eye protection - Filters for welding and related
techniques - Transmittance requirements and
recommended use; German version EN 169:2002
DIN EN 1708-1-2010 焊接.钢焊接连接点的基本细节.第1部分:受压力部件.德文版本EN
1708-1-2010 Welding - Basic welded joint details
in steel - Part 1: Pressurized components; German
version EN 1708-1:2010
DIN EN 1708-2-2000 焊接.碱性焊接钢接合详图.第2部分:无内增压的元件
Welding - Basic weld joint details in steel
- Part 2: Non internal pressurized components;
German version EN 1708-2:2000
DIN EN 1711-2000 焊接的无损检测.通过多平面分析进行焊接涡流检验 Non-destructive
examination of welds - Eddy current examination
of welds by complex plane analysis; German version
EN 1711:2000
DIN EN 1712-2002 焊缝的无损检验.焊接接头的超声波检验.验收标准; 德文版本
EN 1712:1997 + A1:2002 Non-destructive testing
of welds - Ultrasonic testing of welded joints
- Acceptance levels; German version EN 1712:1997
+ A1:2002
DIN EN 1714-2002 焊缝的无损检验.焊接接头的超声波检验; 德文版本 EN
1714:1997 + A1:2002 Non-destructive testing
of welds - Ultrasonic testing of welded joints;
German version EN 1714:1997 + A1:2002
DIN EN 1715-3-2008 铝和铝合金.拉制坯料.第3部分:机械用特殊要求(不包括焊接)
Aluminium and aluminium alloys - Drawing stock
- Part 3: Specific requirements for mechanical
uses (excluding welding); German version EN
1715-3:2008
DIN EN 1715-4-2008 铝和铝合金.拉拔坯料.第4部分:焊接用特殊要求 Aluminium
and aluminium alloys - Drawing stock - Part
4: Specific requirements for welding applications;
German version EN 1715-4:2008
DIN EN 1737-1998 蒸气淬火气孔混凝土或孔隙轻型混凝土预制件钢筋混凝土垫或加固篮焊接结点断裂剪切力测定
Determination of shear strength of welded joints
of reinforcement mats or cages for prefabricated
components made of autoclaved aerated concrete
or lightweight aggregate concrete with open
structure; German version EN 1737:1998
DIN EN 175-1997 人员防护.焊接和相关工艺操作时眼及脸防护装置 Personal
protection - Equipment for eye and face protection
during welding and allied processes; German
version EN 175:1997
DIN EN 1778-1999 焊接热塑性结构的特性值.热塑性设备设计用允许应力和模数的测定
Characteristic values for welded thermoplastic
constructions - Determination of allowable stresses
and moduli for design of thermoplastic equipment;
German version EN 1778:1999
DIN EN 1792-2003 焊接.焊接和相关工艺多语种术语列表.3语种本 Welding
- Multilingual list of terms for welding and
related processes; Trilingual version EN 1792:2003
DIN EN 1803-2002 可运输式储气瓶.焊接炭素钢储气瓶的周期性检验和测试;
德文版本 EN 1968:2002 Transportable gas cylinders
- Periodic inspection and testing of welded
carbon steel gas cylinders; German version EN
1803:2002
DIN EN 22553-1997 焊接接缝和软钎焊接缝.图纸符号标注方法 Welded,
brazed and soldered joints - Symbolic representation
on drawings (ISO 2553:1992); German version
EN 22553:1994
DIN EN 2656-2002 航空航天系列.管道连接件.焊接连接端头.几何图形; 德文版本
EN 2656:2001 Aerospace series - Pipe coupling
- Coupling end, welded; Geometric configuration;
German version EN 2656:2001
DIN EN 27286-1991 电阻焊接设备的图形符号(ISO 7286-86) Graphical
symbols for resistance welding equipment (ISO
7286:1986); german version EN 27286:1991
DIN EN 27963-1992 钢材的焊接点.焊接点超声波检验用的2号校准试样块 Welds
in steel; calibration block No. 2 for ultrasonic
examination of welds (ISO 7963:1985); german
version EN 27963:1992
DIN EN 287-6-2010 焊接工人的资格试验.氧炔焊.第6部分:铸铁 Qualification
test of welders - Fusion welding - Part 6: Cast
iron; German version EN 287-6:2010
DIN EN 2997-007-2008 航空航天系列.持续工作时间为-65℃～175℃、200℃、最高260℃的耐火或非耐火螺纹环连接的圆形电连接器.第00
Aerospace series - Connectors, electrical, circular,
coupled by threaded ring, fire-resistant or
non fire-resistant, operating temperatures -65
°C to 175 °C continuous, 200 °C continuous,
260 °C peak - Part 007: Hermetic receptacle
with round flange attached by welding or brazing
- Product standard; German and English version
EN 2997-007:2006
DIN EN 3081-2002 航空航天系列.钛合金管连接件 8°30'.带动态光束密封端头的修理用焊接箍;
德文版本 EN 3081:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Ferrules, welded with
dynamic beam seal end, for repair; German version
EN 3081:2001
DIN EN 3082-2004 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头
Aerospace series - Pipe coupling 8°30 in titanium
alloy - Unions, bulkhead welded end, for repair;
German and English version EN 3082:2001 + AC:2003
DIN EN 3083-2004 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头
Aerospace series - Pipe coupling 8°30 in titanium
alloy - Unions, bulkhead, long welded end, for
repair; German and English version EN 3083:2001
+ AC:2003
DIN EN 3084-2004 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头
Aerospace series - Pipe coupling 8°30 in titanium
alloy - Unions, welded end threaded for repair;
German and English version EN 3084:2001 + AC:2003
DIN EN 3155-012-2007 航空航天系列.用于连接部件的电触点.第012部分:R级、焊接、D型、凸形、尺寸8、三轴电触点.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 012: Contacts,
electrical, triaxial, size 8, male, type D,
solder, class R - Product standard; German and
English version EN 3155-012:2006
DIN EN 3155-013-2007 航空航天系列.用于连接部件的电触点.第013部分:R级、焊接、D型、凹形、尺寸8、三轴电触点.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 013: Contacts,
electrical, triaxial, size 8, female, type D,
solder, class R - Product standard; German and
English version EN 3155-013:2006
DIN EN 3155-039-2008 航空航天系列.连接元件用电连接器.第039部分:尺寸为16、R级焊接D类同轴插座电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 039: Contacts,
electrical, coaxial, size 16, female, type D,
solder, class R - Product standard; German and
English version EN 3155-039:2007
DIN EN 3155-040-2008 航空航天系列.连接元件用电连接器.第040部分:尺寸为12、R级焊接D类同轴插头电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 040: Contacts,
electrical, coaxial, size 12, male, type D,
solder, class R - Product standard; German and
English version EN 3155-040:2007
DIN EN 3155-041-2008 航空航天系列.连接元件用电连接器.第041部分:尺寸为12、R级焊接D类同轴插座电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 041: Contacts,
electrical, coaxial, size 12, female, type D,
solder, class R - Product standard; German and
English version EN 3155-041:2007
DIN EN 3155-042-2006 航空航天系列.连接部件中用电连接器.第042部分:P级、焊接、D型、042插头、尺寸08mm三轴电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 042: Contacts,
electrical, triaxial, size 08, male 042, type
D, solder, class P - Product standard; German
and English version EN 3155-042:2006
DIN EN 3155-043-2006 航空航天系列.连接部件中用电连接器.第043部分:P级、焊接、D型、043插座、尺寸08mm三轴电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 043: Contacts,
electrical, triaxial, size 08, female 043, type
D, solder, class P - Product standard; German
and English version EN 3155-043:2006
DIN EN 3155-058-2007 航空航天系列.连接元件用电连接器.第058部分:尺寸为16、R级焊接D类同轴插头电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 058: Contacts,
electrical, coaxial, size 16, male, type D,
solder, class R - Product standard; German and
English version EN 3155-058:2006
DIN EN 3155-059-2007 航空航天系列.连接元件用电连接器.第059部分:尺寸为16、R级焊接D类同轴插孔电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 059: Contacts,
electrical, coaxial, size 16, female, type D,
solder, class R - Product standard; German and
English version EN 3155-059:2006
DIN EN 3155-060-2007 航空航天系列.连接元件用电连接器.第060部分:尺寸为12、R级焊接D类同轴插头电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 060: Contacts,
electrical, coaxial, size 12, male, type D,
solder, class R - Product standard; German and
English version EN 3155-060:2006
DIN EN 3155-061-2007 航空航天系列.连接元件用电连接器.第061部分:尺寸为12、R级焊接D类同轴电连接器.产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 061: Contacts,
electrical, coaxial, size 12, female, type D,
solder, class R - Product standard; German and
English version EN 3155-061:2006
DIN EN 3155-067-2009 航空航天系列.用于连接部件的电触头.第067部分:插头式电触头尺寸08,D型,焊接R级,产品标准EN
3155-067:2009 Aerospace series - Electrical
contacts used in elements of connection - Part
067: Contacts, electrical, coaxial, size 08,
male, type D, solder, class R - Product standard;
German and English version EN 3155-067:2009
DIN EN 3243-2002 航空航天系列.钛合金8°30'管连接件.带动态束密封端的金属圈焊接;
德文版本 EN 3243:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Ferrule welded, with
dynamic beam seal end; German version EN 3243:2001
DIN EN 3247-2002 航空航天系列.钛合金8°30'管连接件.焊接端的闷头管接头;
德文版本 EN 3247:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Unions, bulkhead, welded
end; German version EN 3247:2001
DIN EN 3272-2006 航空航天系列.8°30'管接头.焊接箍用动态梁密封端.几何构型.德文和英文版本EN
3272-2001 Aerospace series - Pipe coupling 8°30'
- Dynamic beam seal end for ferrule, welded
- Geometric configuration; German and English
version EN 3272:2001
DIN EN 3372-005-2008 航空航天系列.连续工作温度为-65℃～175℃或200℃带卡口连接的防碰擦中和高接触密度的圆形电连接器.第005部
Aerospace series - Connectors, electrical, circular,
medium and high contact density, scoop-proof
with bayonet coupling, operating temperatures
-65 °C to 175 °C or 200 °C continuous - Part
005: Receptacle, hermetic, round flange, solder
mounting - Product standard; German and English
version EN 3372-005:2007
DIN EN 3561-2004 航空航天系列.钛合金管连接件8°30'.在管端焊接和轧制的带动梁密封端头的箍
Aerospace series - Pipe coupling 8°30 in titanium
alloy - Ferrules with dynamic beam seal end,
welded and reduced at pipe end; German and English
version EN 3561:2001 + AC:2003
DIN EN 3635-2008 航空航天系列.焊接边缘.几何构造 Aerospace
series - Weld lip - Geometrical configuration;
German and English version EN 3635:2008
DIN EN 3646-007-2007 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第007部分:圆形法兰焊接或铜焊接安装密
Aerospace series - Connectors, electrical, circular,
bayonet coupling, operating temperature 175
°C or 200 °C continuous - Part 007: Receptacle,
hermetic, round flange, welding or brazing mounting
- Product standard; German and English version
EN 3646-007:2006
DIN EN 3688-2004 航空航天系列.焊接管用钛合金制成的T环形填充物.14000kPa标称压力
Aerospace series - T-ring fillers in titanium
alloy for welding pipes - 14000 kPa nominal
pressure; German and English version EN 3688:2001
+ AC:2003
DIN EN 3689-2004 航空航天系列.焊接管用钛合金制成的T环形填充物.28000kPa标称压力
Aerospace series - T-ring fillers in titanium
alloy for welding pipes - 28000 kPa nominal
pressure; German and English version EN 3689:2001
+ AC:2003
DIN EN 3691-2004 航空航天系列.钛合金管连接件8°30'.焊接端长闷头活接头
Aerospace series - Pipe coupling 8°30 in titanium
alloy - Unions, bulkhead, long, welded end;
German and English version EN 3691:2001 + AC:2003
DIN EN 3716-003-2007 航空航天系列.数字数据传输用带三维接口的单路连接器.第003部分:焊接插座.产品标准
Aerospace series - Connectors, single-way with
traxial interface, for transmission of digital
data - Part 003: Solder receptacle - Product
standard; German and English version EN 3716-003:2006
DIN EN 3716-004-2007 航空航天系列.数字数据传输用带三维接口的单路连接器.第004部分:焊接插头.产品标准
Aerospace series - Connectors, single-way with
triaxial interface, for transmission of digital
data - Part 004: Solder plug - Product standard;
German and English version EN 3716-004:2006
DIN EN 379-2009 个人眼护设备.自动焊接滤光镜(包括修改件A1:2009),DIN
EN 379:2009-07的英文版本 Personal eye-protection
- Automatic welding filters (includes Amendment
A1:2009); English version of DIN EN 379:2009-07
DIN EN 3852-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.有螺纹的焊接直活管节
Aerospace series - Pipe couplings, 60°, spherical,
in titanium alloy TI-P64001 - Straight unions,
welded, threaded; German and English version
EN 3852:2002
DIN EN 3854-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.焊接套圈
Aerospace series - Pipe couplings, 60°, spherical,
in titanium alloy TI-P64001 - Ferrules, welded;
German and English version EN 3854:2002
DIN EN 3857-2004 航空航天系列.钛合金TI-P64001的60球面管子接头.90焊接弯头
Aerospace series - Pipe couplings, 60°, spherical,
in titanium alloy TI-P64001 - Elbows 90°, welded;
German and English version EN 3857:2002
DIN EN 3868-2007 航空航天系列.管连接件、活动法兰和密封件.TI-P64001型钛合金焊接法兰联接件
Aerospace series - Pipe couplings, loose flanges
and seals - Flange connectors, welded, in titanium
alloy TI-P64001; German and English version
EN 3868:2004
DIN EN 3882-2002 航空航天系列.耐高温合金NI-WH1801 (NiCr20Co18Ti3Al2).焊接填充金属;
德文版本 EN 3882:2001 Aerospace series - Heat resisting
alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler
metal for welding; German version EN 3882:2001
DIN EN 3883-2002 航空航天系列.耐高温合金NI-WH2301 (NiCr22Fe19Mo9Co2).焊接填充金属;
德文版本 EN 3883:2001 Aerospace series - Heat resisting
alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler
metal for welding; German version EN 3883:2001
DIN EN 3884-2002 航空航天系列.耐高温合金NI-WH2601 (NiCr19Nb5Mo3Ti).焊接填充金属;
德文版本 EN 3884:2001 Aerospace series - Heat resisting
alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal
for welding; German version EN 3884:2001
DIN EN 3885-2002 航空航天系列.耐高温合金NI-WH3601 (NiCr22Mo9Nb4).焊接填充金属;
德文版本 EN 3885:2001 Aerospace series - Heat resisting
alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal
for welding; German version EN 3885:2001
DIN EN 3886-2002 航空航天系列.耐高温合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接填充金属;
德文版本 EN 3886:2001 Aerospace series - Heat resisting
alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler
metal for welding; German version EN 3886:2001
DIN EN 3887-2002 航空航天系列.耐高温合金CO-WH4101 (CoCr20W15Ni).焊接填充金属;
德文版本 EN 3887:2001 Aerospace series - Heat resisting
alloy CO-WH4101 (CoCr20W15Ni) - Filler metal
for welding; German version EN 3887:2001
DIN EN 3888-2002 航空航天系列.耐高温合金CO-WH1402 (CoCr22Ni22W15).焊接填充金属;
德文版本 EN 3888:2001 Aerospace series - Heat resisting
alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal
for welding; German version EN 3888:2001
DIN EN 3889-2003 航空航天系列.FE-WM3801钢(X5CrNiCu17-4).焊接填充金属
Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4)
- Filler metal for welding; German and English
version EN 3889:2001
DIN EN 3890-2003 航空航天系列.FE-WM1502钢(X11CrNiMoVN12-3).焊接填充金属
Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3)
- Filler metal for welding; German and English
version EN 3890:2001
DIN EN 3892-2002 航空航天系列.钛合金TI-W64001.焊接填充金属;
德文版本 EN 3892:2001 Aerospace series - Titanium
alloy TI-W64001 - Filler metal for welding;
German version EN 3892:2001
DIN EN 3893-2003 航空航天系列.TI-W19001型钛合金.焊接用金属填充料
Aerospace series - Titanium alloy TI-W19001
- Filler metal for welding; German and English
version EN 3893:2001
DIN EN 3894-2002 航空航天系列.耐高温合金NI-WD3201 (NiMo25Fe6Cr5).焊接填充金属;
德文版本 EN 3894:2001 Aerospace series - Heat resisting
alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal
for welding; German version EN 3894:2001
DIN EN 3895-2002 航空航天系列.耐高温合金NI-WH3901 (NiCr16Mo15).焊接填充金属;
德文版本 EN 3895:2001 Aerospace series - Heat resisting
alloy NI-WH3901 (NiCr16Mo15) - Filler metal
for welding; German version EN 3895:2001
DIN EN 3896-2003 航空航天系列.FE-WM1501钢(X13CrNiMoCo12-3-2-2).焊接填充金属
Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2)
- Filler metal for welding; German and English
version EN 3896:2001
DIN EN 3897-2003 航空航天系列.FE-WA4801钢(X6CrNiMnNb18-10).焊接填充金属
Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10)
- Filler metal for welding; German and English
version EN 3897:2001
DIN EN 4019-2002 航空航天系列.钛合金管连接件 8°30'.焊接端的 90°弯头;
德文版本 EN 4019:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Elbows 90°, welded
end; German version EN 4019:2001
DIN EN 4022-2002 航空航天系列.钛合金管连接件 8°30'.闷头、焊接端的
90°弯头; 德文版本 EN 4022:2001 Aerospace series -
Pipe coupling 8°30 in titanium alloy - Elbows
90°, bulkhead, welded end; German version EN
4022:2001
DIN EN 4024-2010 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的焊接端45°弯头.德文和英文版本
EN 4024-2001 Aerospace series - Pipe coupling
8°30' in titanium alloy - Elbows 45° welded
end with thrust wire nut; German and English
version EN 4024:2009
DIN EN 4031-2002 航空航天系列.钛合金管连接件 8°30'.焊接金属箍用螺母;
德文版本 EN 4031:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Nuts for welded ferrule;
German version EN 4031:2001
DIN EN 4058-2003 航空航天系列.钛和钛合金焊接用焊条和充填金属丝.直径.0.5
mm～ 5.0 mm.尺寸 Aerospace series - Filler rods
and filler wires for welding in titanium and
titanium alloys - Diameter 0,5 mm D 5,0 mm;
Dimensions; German and English version EN 4058:2001
DIN EN 4059-2002 航空航天系列.钢焊接用焊条和焊丝.直径0.5-5.0mm.尺寸
Aerospace series - Filler rods and filler wires
for welding in steel - Diameter 0,5 mm D 5,0
mm; Dimensions; German and English version EN
4059:2001
DIN EN 4060-2003 航空航天系列.耐热合金焊接用焊条和充填金属丝.直径0.5
mm～ 5.0 mm.尺寸 Aerospace series - Filler rods
and filler wires for welding in heat resisting
alloys - Diameter 0,5 mm D 5,0 mm; Dimensions;
German and English version EN 4060:2001
DIN EN 4104-2003 航空航天系列.NI-B40002型镍合金.铜焊接用填充金属粉或膏
Aerospace series - Nickel base alloy NI-B40002
- Filler metal for brazing; Powder or paste;
German and English version EN 4102:2001
DIN EN 4183-2002 航空航天系列.钛合金管连接件 8°30'.焊接端 90°弯头;
德文版本 EN 4183:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Elbows 90°, welded
ends; German version EN 4183:2001
DIN EN 4184-2002 航空航天系列.钛合金管连接件 8°30'.焊接端 45°弯头;
德文版本 EN 4184:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Elbows 45°, welded
ends; German version EN 4184:2001
DIN EN 4188-2006 航空航天系列.钛合金管连接件8°30'.90°弯头长闷头焊接端头
Aerospace series - Pipe coupling 8°30′ in titanium
alloy - Elbows 90° bulkhead, long, welded end;
German and English version EN 4188:2001
DIN EN 4233-2002 航空航天系列.钛合金管连接件 8°30'.带螺纹的焊接管接头;
德文版本 EN 4233:2001 Aerospace series - Pipe coupling
8°30 in titanium alloy - Unions, welded, threaded;
German version EN 4233:2001
DIN EN 4324-2003 航空航天系列.铝合金AL-W42201.焊接填充金属.焊条
Aerospace series - Aluminium alloy AL-W42201
- Filler metal for welding; Rod; German and
English version EN 4324:2001
DIN EN 4325-2002 航空航天系列.耐高温合金 NI-WH1302 (NiCr20Co13Mo4Ti3Al).焊接填充金属:线材和棒材;
德文版本 EN 4325:200 Aerospace series - Heat resisting
alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler
metal for welding; Wire and rod; German version
EN 4325:2001
DIN EN 4326-2002 航空航天系列.耐高温合金铜-WH4102 (CoCr28W20Ni5V1).焊接填充金属:线材和棒材;
德文版本 EN 4326:2001 Aerospace series - Heat resisting
alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal
for welding; Wire and rod; German version EN
4326:2001
DIN EN 4327-2002 航空航天系列.耐高温合金铜CO-WH1401 (CoCr26Ni11W8).焊接填充金属:线材和棒材;
德文版本 EN 4327:2001 Aerospace series - Heat resisting
alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal
for welding; Wire and rod; German version EN
4327:2001
DIN EN 4328-2002 航空航天系列.钢FE-WM1601 (X18CrWNi13-3-2).焊接填充金属:线材和棒材;
德文版本 EN 4328:2002 Aerospace series - Steel FE-WM1601
(X18CrWNi13-3-2) - Filler metal for welding;
Wire and rod; German version EN 4328:2002
DIN EN 4329-2002 航空航天系列.耐高温合金NI-WH0001 (NiCr20).焊接填充金属:线材和棒材;
德文版本 EN 4329:2001 Aerospace series - Heat resisting
alloy NI-WH0001 (NiCr20) - Filler metal for
welding; Wire and rod; German version EN 4329:2001
DIN EN 4330-2002 航空航天系列.钢FE-WA4802 (X8CrNiMn27-22-2).焊接填充金属:线材和棒材;
德文版本 EN 4330:2002 Aerospace series - Steel FE-WA4802
(X8CrNiMn27-22-2) - Filler metal for welding;
Wire and rod; German version EN 4330:2002
DIN EN 4331-2002 航空航天系列.钢FE-WL1804 (25CrMnMo4-2-2).焊接填充金属:线材和棒材;
德文版本 EN 4331:2002 Aerospace series - Steel FE-WL1804
(25CrMnMo4-2-2) - Filler metal for welding;
Wire and rod; German version EN 4331:2002
DIN EN 4332-2002 航空航天系列.钢FE-WL1805 (8CrMnMo12-4-9).焊接填充金属:线材和棒材;
德文版本 EN 4332:2002 Aerospace series - Steel FE-WL1805
(8CrMnMo12-4-9) - Filler metal for welding;
Wire and rod; German version EN 4332:2002
DIN EN 4333-2002 航空航天系列.钢 FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2).焊接填充金属:线材和棒材;
德文版本 EN 4333:20 Aerospace series - Steel FE-WA4902
(X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal
for welding; Wire and rod; German version EN
4333:2002
DIN EN 4334-2002 航空航天系列.钢 FE-WL1806 (15CrMnMoV5-4-9-3).焊接填充金属:线材和棒材;
德文版本 EN 4334:2002 Aerospace series - Steel FE-WL1806
(15CrMnMoV5-4-9-3) - Filler metal for welding;
Wire and rod; German version EN 4334:2002
DIN EN 4336-2002 航空航天系列.钢 FE-WA3801 (X4CrNiMn20-10-2).焊接填充金属:线材和棒材;
德文版本 EN 4336:2002 Aerospace series - Steel FE-WA3801
(X4CrNiMn20-10-2) - Filler metal for welding;
Wire and rod; German version EN 4336:2002
DIN EN 4337-2002 航空航天系列.耐高温合金 NI-WH8901 (NiCr16Ti3Mn2).焊接填充金属:线材和棒材;
德文版本 EN 4337:2001 Aerospace series - Heat resisting
alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal
for welding; Wire and rod; German version EN
4337:2001
DIN EN 4338-2002 航空航天系列.耐高温合金 NI-WH3902 (NiCr25Mo10C).焊接填充金属:线材和棒材;
德文版本 EN 4338:2001 Aerospace series - Heat resisting
alloy NI-WH3902 (NiCr25Mo10C) - Filler metal
for welding; Wire and rod; German version EN
4338:2001
DIN EN 4339-2002 航空航天系列.耐高温合金 CO-WH4002 (CoCr29W9).焊接填充金属:线材和棒材;
德文版本 EN 4339:2001 Aerospace series - Heat resisting
alloy CO-WH4002 (CoCr29W9) - Filler metal for
welding; Wire and rod; German version EN 4339:2001
DIN EN 4340-2002 航空航天系列.镁合金 MG-W68001.焊接填充金属:线材和棒材;
德文版本 EN 4340:2002 Aerospace series - Magnesium
alloy MG-W68001 - Filler metal for welding;
Wire and rod; German version EN 4340:2002
DIN EN 4341-2002 航空航天系列.铝合金 AL-W46431.焊接填充金属:线材和棒材;
德文版本 EN 4341:2001 Aerospace series - Aluminium
alloy AL-W46431 - Filler metal for welding;
Wire and rod; German version EN 4341:2001
DIN EN 4342-2002 航空航天系列.钛合金 TI-W99001.焊接填充金属:线材和棒材;
德文版本 EN 4342:2001 Aerospace series - Titanium
TI-W99001 - Filler metal for welding; Wire and
rod; German version EN 4342:2001
DIN EN 4343-2002 航空航天系列.钢 FE-WM1001 (X13Cr12).焊接填充金属:线材和棒材;
德文版本 EN 4343:2002 Aerospace series - Steel FE-WM1001
(X13Cr12) - Filler metal for welding; Wire and
rod; German version EN 4343:2002
DIN EN 4344-2002 航空航天系列.钢 FE-WM10022 (X13Cr13).焊接填充金属:线材和棒材;
德文版本 EN 4344:2001 Aerospace series - Steel FE-WM1002
(X13Cr13) - Filler metal for welding; Wire and
rod; German version EN 4344:2001
DIN EN 4549-2004 航空航天系列.耐热钢或耐热镍合金管连接件.焊接的连接件端.设计构造.英制系列
Aerospace series - Pipe coupling, in heat resisting
steel or in heat resisting nickel alloy - Coupling
end, welded - Design configuration - Inch series;
German and English version EN 4549:2003
DIN EN 4550-1-2004 航空航天系列.管道连接件37设计构造.英尺系列.第1部分:球形阳螺纹焊接端
Aerospace series - Pipe coupling 37° - Design
configuration - Inch series - Part 1: Male sealing
ends, spherical; German and English version
EN 4550-1:2003
DIN EN 4552-2004 航空航天系列.耐热钢制37球面管子接头.焊接端直螺纹接头.英制系列
Aerospace series - Pipe coupling, 37°, spherical,
in heat resisting steel - Straight nipples,
welded end - Inch series; German and English
version EN 4552:2003
DIN EN 4553-2004 航空航天系列.耐热钢制37球面管子接头.焊接端90弯管螺纹接头.英制系列
Aerospace series - Pipe coupling 37°, spherical,
in heat resisting steel - Elbow 90° nipples,
welded end - Inch series; German and English
version EN 4553:2003
DIN EN 4555-2004 航空航天系列.耐热钢制37球面管子接头.焊接端套圈.英制系列
Aerospace series - Pipe coupling 37°, in heat
resisting steel - Ferrules, welded end - Inch
series; German and English version EN 4555:2003
DIN EN 4557-2004 航空航天系列.耐热钢制37球面管子接头.焊接端T形螺纹接头.英制系列
Aerospace series - Pipe couplings, 37°, spherical,
in heat resisting steel - Tees nipples, welded
end - Inch series; German and English version
EN 4557:2003
DIN EN 4561-2004 航空航天系列.耐热钢制焊接管子接头.90弯管.英制系列
Aerospace series - Pipe coupling, welded, in
heat resisting steel - Elbow 90° - Inch series;
German and English version EN 4561:2003
DIN EN 4562-2004 航空航天系列.耐热钢制焊接管子接头.异径管.英制系列
Aerospace series - Pipe coupling, welded, in
heat resisting steel - Reductors - Inch series;
German and English version EN 4562:2003
DIN EN 4563-2004 航空航天系列.耐热钢制焊接管子接头.三通.英制系列 Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Tees - Inch series; German and English
version EN 4563:2003
DIN EN 4632-001-2009 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第001部分:一般要求,德文版本和英
Aerospace series - Welded and brazed assemblies
for aerospace constructions - Weldability and
brazeability of materials - Part 001: General
requirements; German and English version EN
4632-001:2008
DIN EN 4632-002-2009 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第002部分:均质铝及铝合金组件
Aerospace series - Welded and brazed assemblies
for aerospace constructions - Weldability and
brazeability of materials - Part 002: Homogeneous
assemblies aluminium and aluminium alloys; German
and English version EN 4632-002:2008
DIN EN 50069 Berichtigung 1-2008 电压＞1kV用交流开关装置和控制装置.充气高压开关装置和控制装置用铸铝和锻铝合金的焊接复合物外壳.技术勘
A.c. switchgear and controlgear for voltages
above 1 kV - Welded composite enclosures of
cast and wrought aluminium alloys for gas-filled
high-voltage switchgear and controlgear; German
version EN 50069:1991, Corrigendum to DIN EN
50069 (VDE 0670-805):1993-08; German version
CENELEC-Cor.: 2007 to EN 50069:1991
DIN EN 50069-1993 大于1 kV 的交流开关设备和控制装置.充气高压开关设备和控制装置用铸铝和精锻铝合金焊接复合物外壳;
德文版 A.c. switchgear and controlgear for voltages
above 1 kV; welded composite enclosures of cast
and wrought aluminium alloys for gas-filled
high-voltage switchgear and controlgear; German
version EN 50069:1991
DIN EN 50069/A1-1995 充气高压开关设备和控制装置用铸铝合金和精锻铝合金焊接复合物外壳;
修改件 A1; 德文版本 EN 50069:1991/A1 Welded composite
enclosures of cast and wrought aluminium alloys
for gas-filled high-voltage switchgear and controlgear;
Amendment A1; German version EN 50069:1991/A1:1993
DIN EN 50445-2009 带与人体暴露于电磁场相关的基础限制的电阻焊接、电弧焊接和类似工艺用设备的证明一致性用产品系列标准(0Hz
Product family standard to demonstrate compliance
of equipment for resistance welding, arc welding
and allied processes with the basic restrictions
related to human exposure to electromagnetic
fields (0 Hz to 300 GHz); German version EN
50445:2008
DIN EN 50505-2009 人体暴露于电阻焊接和相关工艺用设备产生的电磁场评估的基本标准
Basic standard for the evaluation of human exposure
to electromagnetic fields from equipment for
resistance welding and allied processes; German
version EN 50505:2008
DIN EN 514-2000 门窗构架未增塑聚氯乙烯(PVC-U)型材.焊接角和T型连接强度测定.
Unplasticized polyvinylchloride (PVC-U) profiles
for the fabrication of windows and doors - Determination
of the strength of welded corner and T-joint;
German version EN 514:2000
DIN EN 560-2008 气焊设备.焊接、切割和相关工艺用设备的软管连接件 Gas
welding equipment - Hose connections for equipment
for welding, cutting and allied processes(includes
Corrigendum AC:2007）; English version of DIN
EN 560:2008-03
DIN EN 561-2002 气焊设备.焊接、切割和相关工艺用与关闭阀的速动连接; 德文版本
EN 561:2002 Gas welding equipment - Quick-action
coupling with shut-off valves for welding, cutting
and allied processes; German version EN 561:2002
DIN EN 60068-2-20 Berichtigung 1-2009 环境测试.第2-20部分:试验.试验T:带导线装置的可焊接性和焊接热抵抗性的试验方法.技术勘误DIN
EN 60068-2-2 Environmental testing - Part 2-20:
Tests - Test T: Test methods for solderability
and resistance to soldering heat of devices
with leads (IEC 60068-2-20:2008); German version
EN 60068-2-20:2008, Corrigendum to DIN EN 60068-2-20:2009-02
DIN EN 60068-2-20-2009 环境试验.第2-20部分:试验.试验T:带导线装置的可焊接性和焊接热抵抗性的试验方法
Environmental testing - Part 2-20: Tests - Test
T: Test methods for solderability and resistance
to soldering heat of devices with leads (IEC
60068-2-20:2008); German version EN 60068-2-20:2008
DIN EN 60068-2-58-2005 环境试验.第2-58部分:试验.试验Td:表面安装设备(SMD)的可焊性、耐金属化溶融和耐焊接热的试验方法
Environmental testing - Part 2-58: Tests - Test
Td: Test methods for solderability, resistance
to dissolution of metallization and to soldering
heat of surface mounting devices (SMD) (IEC
60068-2-58:2004); German version EN 60068-2-58:2004
+ Corrigendum 2004
DIN EN 60317-19-2000 特种绕组线规范.第19部分:130级聚酰胺包敷可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Part 19: Solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 130 (IEC 60317-19:1990 + A1:1997 + A2:1999);
German version EN 60317-19:1995 + A1:1998 +
A2:2000
DIN EN 60317-2-2000 特种绕组线规范.第2部分:130级有粘结层的可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Part 2: Solderable polyurethane enamelled
round copper wire, class 130, with a bonding
layer (IEC 60317-2:1990 + A1:1997 + A2:1999);
German version EN 60317-2:1994 + A1:1998 + A2:2000
DIN EN 60317-20-2000 特种绕组线规范.第20部分:155级可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Part 20: Solderable polyurethane enamelled
round copper wire, class 155 (IEC 60317-20:1990
+ A1:1997 + A2:1999); German version EN 60317-20:1995
+ A1:1998 + A2:2000
DIN EN 60317-21-2000 特种绕组线规范.第21部分:155级聚酰胺包敷可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Part 21: Solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 155 (IEC 60317-21:1990 + A1:1997 + A2:1999);
German version EN 60317-21:1995 + A1:1998 +
A2:2000
DIN EN 60317-23-2000 特种绕组线规范.第23部分:180级可焊接聚酰亚胺漆包圆铜线
Specifications for particular types of winding
wires - Part 23: Solderable polyesterimide enamelled
round copper wire, class 180 (IEC 60317-23:1990
+ A1:1997 + A2:1999); German version EN 60317-23:1995
+ A1:1998 + A2:2000
DIN EN 60317-35-2000 特种绕组线规范.第35部分:155级带粘结层的可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Part 35: Solderable polyurethane enamelled
round copper wire, class 155, with a bonding
layer (IEC 60317-35:1992 + A1:1997 + A2:1999);
German version EN 60317-35:1994 + A1:1998 +
A2:2000
DIN EN 60317-36-2000 特种绕组线规范.第36部分:180级带粘结层的可焊接聚酰胺酯漆包圆铜线
Specifications for particular types of winding
wires - Part 36: Solderable polyesterimide enamelled
round copper wire, class 180, with a bonding
layer (IEC 60317-36:1992 + A1:1997 + A2:1999);
German version EN 60317-36:1994 + A1:1998 +
A2:2000
DIN EN 60317-4-2000 特种绕组线规范.第4部分:130级可焊接聚氨酯漆包圆铜线
Specifications for particular types of winding
wires - Part 4: Solderable polyurethane enamelled
round copper wire, class 130 (IEC 60317-4:1990
+ A1:1997 + A2:1999); German version EN 60317-4:1994
+ A1:1998 + A2:2000
DIN EN 60317-55-2008 特种绕组线规范.第55部分:涂覆聚酰胺的可焊接聚亚安酯漆包圆铜线、180级
Specifications for particular types of winding
wires - Part 55: Solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 180 (IEC 60317-55:2007); German version
EN 60317-55:2008
DIN EN 60352-2 Berichtigung 1-2007 无焊接连接.第2部分:压接连接.一般要求,试验方法和实施指南.DIN
EN 60352-2-2006技术勘误 Solderless connections -
Part 2: Crimped connections - General requirements,
test methods and practical guidance (IEC 60352-2:2006);
German version EN 60352-2:2006, Corrigenda to
DIN EN 60352-2:2006-11
DIN EN 60512-12-1-2006 电子设备用连接器.试验和测量.第12-1部分:焊接试验.试验12a:焊料湿浴法测量可焊性(IEC
60512-12-1:2006) Connectors for electronic equipment
- Tests and measurements - Part 12-1: Soldering
tests - Test 12a: Solderability, wetting, solder
bath method (IEC 60512-12-1:2006); German version
EN 60512-12-1:2006
DIN EN 60512-12-4 Berichtigung 1-2008 电子设备用连接器.试验和测量.第12-4部分:软钎焊试验.试验12d:耐软钎焊接的焊料槽方法.技术勘误DIN
EN 6051 Connectors for electronic equipment
- Tests and measurements - Part 12-4: Soldering
tests - Test 12d: Resistance to soldering heat,
solder bath method (IEC 60512-12-4:2006); German
version EN 60512-12-4:2006, Corrigendum to DIN
EN 60512-12-4:2006-11; German version CENELEC-Cor.:2006
to EN 60512-12-4:2006
DIN EN 60512-12-7-2001 电子设备连接器.试验和测量.第12-7部分:焊接试验.试验12g.可焊性.湿润平衡法
Connectors for electronic equipment - Tests
and measurements - Part 12-7: Soldering tests;
Test 12g: Solderability, wetting balance method
(IEC 60512-12-7:2001); German version EN 60512-12-7:2001
DIN EN 60749-20-1-2009 半导体器件.机械和气候试验方法.第20-1部分:对水分和焊接热综合效应敏感的表面安装设备的处理,包装,标签和
Semiconductor devices - Mechanical and climatic
test methods - Part 20-1: Handling, packing,
labelling and shipping of surface-mount devices
sensitive to the combined effect of moisture
and soldering heat (IEC 60749-20-1:2009); German
version EN 60749-20-1:2009
DIN EN 60749-20-2010 半导体器件.机械和气候试验方法.第20部分:塑料封装的表面安装器件抗湿气和焊接热的综合影响(IEC
60749-20-2 Semiconductor devices - Mechanical
and climatic test methods - Part 20: Resistance
of plastic encapsulated SMDs to the combined
effect of moisture and soldering heat (IEC 60749-20:2008);
German version EN 60749-20:2009
DIN EN 60974-1-2006 电弧焊设备.第1部分:焊接电源(IEC 60974-1:2005)
Arc welding equipment - Part 1: Welding power
sources (IEC 60974-1:2005); German version EN
60974-1:2005
DIN EN 60974-12-2006 弧焊设备.第12部分:焊接电缆连接设备 Arc
welding equipment - Part 12: Coupling devices
for welding cables (IEC 60974-12:2005); German
version EN 60974-12:2005
DIN EN 60974-8-2004 电弧焊设备.第8部分:焊接和等离子切割设备用气体控制台
Arc welding equipment - Part 8: Gas consoles
for welding and plasma cutting systems (IEC
60974-8:2004); German version EN 60974-8:2004
DIN EN 61188-5-1-2003 印制电路板和印制电路板组件.设计和使用.第5-1部分:焊接(焊接区/接缝)考虑.总要求
Printed boards and printed board assemblies
- Design and use - Part 5-1: Attachment (land/joint)
considerations - Generic requirements (IEC 61188-5-1:2002);
German version EN 61188-5-1:2002
DIN EN 61188-5-2-2004 印制电路板和印制电路板组件.设计和使用.第5-2部分:焊接(焊接区/接缝)条件.分立元件
Printed boards and printed board assemblies
- Design and use - Part 5-2: Attachment (land/joint)
considerations - Discrete components (IEC 61188-5-2:2003);
German version EN 61188-5-2:2003
DIN EN 61188-5-3-2008 印制电路板和印制电路板组件.设计和使用.第5-3部分:焊接(焊接区/焊缝)考虑.两面带有翅形引线的部件
Printed boards and printed board assemblies
- Design and use - Part 5-3: Attachment (land/joint)
considerations - Components with gull-wing leads
on two sides (IEC 61188-5-3:2007); German version
EN 61188-5-3:2007
DIN EN 61188-5-4-2008 印制电路板和印制电路板组件.设计和使用.第5-4部分:焊接(焊接区和焊缝)考虑.两面带有J形引线的部件
Printed boards and printed board assemblies
- Design and use - Part 5-4: Attachment (land/joint)
considerations - Components with J leads on
two sides (IEC 61188-5-4:2007); German version
EN 61188-5-4:2007
DIN EN 61188-5-5-2008 印制电路板和印制电路板组件.设计和使用.第5-5部分:焊接(焊接区/焊缝)考虑.四面带有翅形引线的部件
Printed boards and printed board assemblies
- Design and use - Part 5-5: Attachment (land/joint)
considerations - Components with gull-wing leads
on four sides (IEC 61188-5-5:2007); German version
EN 61188-5-5:2007
DIN EN 61188-5-8-2008 印制电路板和印制电路板组件.设计和使用.第5-8部分:焊接(焊接区/焊缝)考虑.区域阵列组件(BGA、FBGA、CGA、L
Printed boards and printed board assemblies
- Design and use - Part 5-8: Attachment (land/joint)
considerations - Area array components (BGA,
FBGA, CGA, LGA) (IEC 61188-5-8:2007); German
version EN 61188-5-8:2008
DIN EN 61191-1-1999 印刷电路板组件.第1部分:总规范.使用表面安装的焊接电气和电子组件和相关装组件的要求
Printed board assemblies - Part 1: Generic specification.
Requirements for soldered electrical and electronic
assemblies using surface mount and related assembly
technologies (IEC 61191-1:1998); German version
EN 61191-1:1998
DIN EN 61191-2-1999 印刷电路板组件.第2部分:分规范.表面安装焊接组件的要求
Printed board assemblies - Part 2: Sectional
specification: Requirements for surface mount
soldered assemblies (IEC 61191-2:1998); German
version EN 61191-2:1998
DIN EN 61191-3-1999 印刷电路板组件.第3部分:分规范.通孔安装焊接组件的要求
Printed board assemblies - Part 3: Sectional
specification: Requirements for through-hole
mount soldered assemblies (IEC 61191-3:1998);
German version EN 61191-3:1998
DIN EN 61191-4-1999 印刷电路板组件.第4部分:分规范.接线端焊接组件的要求
Printed board assemblies - Part 4: Sectional
specification: Requirements for terminal soldered
assemblies (IEC 61191-4:1998); German version
EN 61191-4:1998
DIN EN 62135-2-2008 电阻焊接设备.第2部分:电磁兼容性(EMC)要求
Resistance welding equipment - Part 2: Electromagnetic
compatibility (EMC) requirements (IEC 62135-2:2007);
German version EN 62135-2:2008
DIN EN 62137-1-1-2008 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-1部分:拉拔强度试验
Surface mounting technology - Environmental
and endurance test methods for surface mount
solder joint - Part 1-1: Pull strength test
(IEC 62137-1-1:2007); German version EN 62137-1-1:2007
DIN EN 62137-1-2-2008 表面安装技术.表面装配的焊接接缝的环境和耐久性试验方法.第1-2部分:切变强度试验
Surface mounting technology - Environmental
and endurance test methods for surface mount
solder joint - Part 1-2: Shear strength test
(IEC 62137-1-2:2007); German version EN 62137-1-2:2007
DIN EN 62137-1-3-2009 表面安装技术.表面安装焊接点用环境和持久测试方法.第1-3部分:循环跌落试验(IEC
62137-1-3:2008).德文版本 Surface mounting technology
- Environmental and endurance test methods for
surface mount solder joint - Part 1-3: Cyclic
drop test (IEC 62137-1-3:2008); German version
EN 62137-1-3:2009
DIN EN 62137-1-5-2010 表面贴装技术.表面贴装焊接接点用环境及疲劳试验方法.第1-5部分:机械剪切疲劳试验(IEC
62137-1-5-2009).德 Surface mounting technology
- Environmental and endurance test methods for
surface mount solder joint - Part 1-5: Mechanical
shear fatigue test (IEC 62137-1-5:2009); German
version EN 62137-1-5:2009
DIN EN 756-2004 焊接消耗品.非合金钢和细粒钢埋弧焊用实芯焊丝、实芯焊丝和药芯焊丝混合助熔剂.分类
Welding consumables - Solid wires, solid wire-flux
and tubular cored electrode-flux combinations
for submerged arc welding of non alloy and fine
grain steels - Classification; German version
EN 756:2004
DIN EN 757-1997 焊接添加剂.高强度钢手动电弧焊用带涂药包皮的焊条.分类
Welding consumables - Covered electrodes for
manual metal arc welding of high strength steels
- Classification; German version EN 757:1997
DIN EN 846-3-2000 砖石工程辅助元部件试验方法.第3部分:预制底层接缝加筋焊接抗剪载荷能力测定
Methods of tests for ancillary components for
masonry - Part 3: Determination of shear load
capacity of welds in prefabricated bed joint
reinforcement; German version EN 846-3:2000
DIN EN 875-1995 金属材料焊接破坏试验.冲击试验.试样定位、切口定向和检查
Destructive tests on welds in metallic materials
- Impact tests - Test specimen location, notch
orientation and examination; German version
EN 875:1995
DIN EN 876-1995 金属材料焊接的破坏试验.有熔焊接头的焊接金属的纵向拉伸试验
Destructive tests on welds in metallic materials
- Longitudinal tensile test on weld metal in
fusion welded joints; German version EN 876:1995
DIN EN 895-1999 金属材料焊接破坏试验.横向拉伸试验 Destructive
tests on welds in metallic materials - Transverse
tensile test; German version EN 895:1995
DIN EN ISO 10042-2006 焊接.铝和铝合金的弧焊接头.缺陷质量分级 (ISO
10042-2005).德文版本 EN ISO 10042-2005 Welding -
Arc-welded joints in aluminium and its alloys
- Quality levels for imperfections (ISO 10042:2005);
English version of DIN EN ISO 10042:2006-02
DIN EN ISO 10447-2007 电阻焊接.点焊、凸焊和有缝焊的剥离和凿剥离试验
Resistance welding - Peel and chisel testing
of resistance spot and projection welds (ISO
10447:2006); English version of DIN EN ISO 10447:2007-09
DIN EN ISO 1071-2003 焊接耗材.铸铁熔焊用药皮(涂料)电焊条、焊丝、焊棒和管状焊条.分类
Welding consumables - Covered electrodes, wires,
rods and tubular cored electrodes for fusion
welding of cast iron - Classification (ISO 1071:2003);
German version EN ISO 1071:2003
DIN EN ISO 10882-1-2001 焊接及相关工艺中的健康和安全.工作人员工作区气载粒子和气体的取样.第1部分:气载粒子取样
Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operator's breathing zone - Part 1: Sampling
of airborne particles (ISO 10882-1:2001); German
version EN ISO 10882-1:2001
DIN EN ISO 10882-2-2001 焊接及相关工艺中的健康和安全.工作人员工作区气载粒子和气体的取样.第2部分:气体取样
Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operator's breathing zone - Part 2: Sampling
of gases (ISO 10882-2:2000); German version
EN ISO 10882-2:2000
DIN EN ISO 11611-2008 焊接及相关工艺用防护服 Protective
clothing for use in welding and allied processes
(ISO 11611:2007); English version of DIN EN
ISO 11611:2008-01
DIN EN ISO 11970-2007 钢铸件制造焊接焊接工艺的规范和验收 Specification
and approval of welding procedures for production
welding of steel castings (ISO 11970:2001);
English version of DIN EN ISO 11970:2007-09
DIN EN ISO 13916-1996 焊接.预热温度、层间温度和预加热维持温度测量导则
Welding - Guidance on the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature (ISO 13916:1996); German
version EN ISO 13916:1996
DIN EN ISO 13918-2008 焊接.电弧螺柱焊接用螺柱和陶瓷套圈 Welding
- Studs and ceramic ferrules for arc stud welding
(ISO 13918:2008); English version of DIN EN
ISO 13918:2008-10
DIN EN ISO 13919-1-1996 焊接.电子和激光束焊接接头.质量缺陷等级指南.第1部分:钢
Welding - Electrons and laser beam welded joints;
guidance on quality levels for imperfections
- Part 1: Steel (ISO 13919-1:1996); German version
EN ISO 13919-1:1996
DIN EN ISO 13919-2-2001 焊接.电子和激光束焊接接头.质量缺陷等级导则.第1部分:铝及可焊铝合金
Welding - Electron and laser beam welded joints;
Guidance on quality levels for imperfections
- Part 2: Aluminium and its weldable alloys
(ISO 13919-2:2001); German version EN ISO 13919-2:2001
DIN EN ISO 13920-1996 焊接.焊接结构通用公差.长度和角度的尺寸、形状和位置
Welding - General tolerances for welded constructions
- Dimensions for lengths and angles; shape and
position (ISO 13920:1996); German version EN
ISO 13920:1996
DIN EN ISO 14114-1999 气焊设备.焊接、切割和相关工艺用乙炔汇流系统一般要求
Gas welding equipment - Acetylene manifold systems
for welding, cutting and allied processes -
General requirements (ISO 14114:1999); German
version EN ISO 14114:1999
DIN EN ISO 14172-2009 焊接消耗品.镍和镍合金的手工金属弧焊用涂敷焊条.分类
Welding consumables - Covered electrodes for
manual metal arc welding of nickel and nickel
alloys - Classification (ISO 14172:2008); English
version of DIN EN ISO 14172:2009-03
DIN EN ISO 14175-2008 焊接消耗品.氧炔焊及有关工艺用气体和气体混合物
Welding consumables - Gases and gas mixtures
for fusion welding and allied processes (ISO
14175:2008); German version EN ISO 14175:2008
DIN EN ISO 14323-2006 电阻点焊和凸焊.焊接破坏试验.影响剪切试验和剪切试验的样本尺寸和程序(ISO
14323:2006) Resistance spot welding and projection
welds - Destructive testing of welds - Specimen
dimensions and procedure for impact shear test
and cross-tension testing (ISO 14323:2006);
English version of DIN EN ISO 14323:2006-07
DIN EN ISO 14324-2003 电阻点焊.焊接的有损检验.点焊接头的疲劳试验方法
Resistance spot welding - Destructive tests
of welds - Method for the fatigue testing of
spot welded joints (ISO 14324:2003); German
version EN ISO 14324:2003
DIN EN ISO 14327-2004 电阻焊接.电阻点焊、凸焊和缝焊的可焊性凸角的测定过程
Resistance welding - Procedures for determining
the weldability lobe for resistance spot, projection
and seam welding (ISO 14327:2004); German version
EN ISO 14327:2004
DIN EN ISO 14329-2003 电阻点焊.焊接的有损检验.电阻点焊、缝焊和凸焊的故障类型和几何测量
Resistance welding - Destructive tests of welds
- Failure types and geometric measurements for
resistance spot, seam and projection welds (ISO
14329:2003); German version EN ISO 14329:2003
DIN EN ISO 14341-2008 焊接消耗品.非合金钢和细粒钢的金属气体保护弧焊用焊极和沉积物.分类
Welding consumables - Wire electrodes and deposits
for gas shielded metal arc welding of non alloy
and fine grain steels - Classification (ISO
14341:2002); German version EN ISO 14341:2008
DIN EN ISO 14343-2010 焊接消耗品.不锈钢和耐热钢氧炔焊用焊丝电极、条式电极、焊丝和焊条.分类(ISO
14343-2009).德文版本EN ISO Welding consumables -
Wire electrodes, strip electrodes, wires and
rods for arc welding of stainless and heat resisting
steels - Classification (ISO 14343:2009); German
version EN ISO 14343:2009
DIN EN ISO 14554-1-2000 焊接质量要求.金属材料的电阻焊接.第1部分:综合质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Part 1: Comprehensive
quality requirements (ISO 14554-1:2000); German
version EN ISO 14554-1:2000
DIN EN ISO 14554-2-2000 焊接质量要求.金属材料的电阻焊接.第2部分:基本质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Part 2: Elementary
quality requirements (ISO 14554-2:2000); German
version EN ISO 14554-2:2000
DIN EN ISO 14555-2006 焊接.金属材料的电弧螺柱焊接 Welding
- Arc stud welding of metallic materials (ISO
14555:2006); English version of DIN EN ISO 14555:2006-12
DIN EN ISO 14731-2006 焊接管理.任务和职责 Welding coordination
- Tasks and responsibilities (ISO 14731:2006);
English version of DIN EN ISO 14731:2006-12
DIN EN ISO 14744-1-2008 焊接.电子束焊接机的验收检验.第1部分:原则和验收条件
Welding - Acceptance inspection of electron
beam welding machines - Part 1: Principles and
acceptance conditions (ISO 14744-1:2008); German
version EN ISO 14744-1:2008
DIN EN ISO 14744-2-2000 焊接.电子束焊接机的验收检验.第2部分:加速电压特性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 2: Measurement
of acceleration voltage characteristics (ISO
14744-2:2000); German version EN ISO 14744-2:2000
DIN EN ISO 14744-3-2000 焊接.电子束焊接机的验收检验.第3部分:电子束电流特性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 3: Measurement
of beam current characteristics (ISO 14744-3:2000);
German version EN ISO 14744-3:2000
DIN EN ISO 14744-4-2000 焊接.电子束焊接机的验收检验.第4部分:焊接速度的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 4: Measurement
of welding speed (ISO 14744-4:2000); German
version EN ISO 14744-4:2000
DIN EN ISO 14744-5-2000 焊接.电子束焊接机验收检验.第5部分:偏转精度的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 5: Measurement
of run-out accuracy (ISO 14744-5:2000); German
version EN ISO 14744-5:2000
DIN EN ISO 14744-6-2000 焊接.电子束焊接机验收检验.第6部分:焊点位置稳定性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 6: Measurement
of stability of spot position (ISO 14744-6:2000);
German version EN ISO 14744-6:2000
DIN EN ISO 15011-1-2010 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.第1部分:电弧焊产生的烟尘排放率测定和烟尘采集
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 1: Determination of fume emission rate
during arc welding and collection of fume for
analysis (ISO 15011-1:2009); German version
EN ISO 15011-1:2009
DIN EN ISO 15011-2-2010 焊接和相关工艺中的健康和安全.烟尘和气体取样的实验室方法.第2部分:在电弧焊、切削加工和刨削槽时，一氧化
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 2: Determination of the emission rates
of carbon monoxide (CO), carbon dioxide (CO<(Index)2>),
nitrogen monoxide (NO) and nitrogen dioxide
(NO<(Index)2>) during arc welding, cutting
and gouging (ISO 15011-2:2009); German version
EN ISO 15011-2:2009
DIN EN ISO 15011-3-2010 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定
(ISO 15011-3-2009 Health and safety in welding
and allied processes - Laboratory method for
sampling fume and gases - Part 3: Determination
of ozone emission rate during arc welding (ISO
15011-3:2009); German version EN ISO 15011-3:2009
DIN EN ISO 15011-4-2009 焊接和有关工艺中的健康和安全.烟尘和气体取样的试验室方法.第4部分:烟尘数据表(ISO
15011-4:2006+修改件1: Health and safety in welding
and allied processes - Laboratory method for
sampling fume and gases - Part 4: Fume data
sheets (ISO 15011-4:2006 + Amd 1:2008)(includes
Amendment A1:2008); English version of DIN EN
ISO 15011-4:2009-07
DIN EN ISO 15012-1-2005 焊接和相关工艺中的卫生和安全.空气过滤设备的要求、试验和标记.第1部分:焊接烟的分离效率试验
Health and safety in welding and allied processes
- Requirements, testing and marking of equipment
for air filtration - Part 1: Testing of the
separation efficiency for welding fume (ISO
15012-1:2004); German version EN ISO 15012-1:2004
DIN EN ISO 15012-2-2008 焊接和相关工艺的卫生和安全.空气过滤用设备的要求、试验和标记.第2部分:采集罩和喷嘴的最小空气体积流率的
Health and safety in welding and allied processes
- Requirements, testing and marking of equipment
for air filtration - Part 2: Determination of
the minimum air volume flow rate of captor hoods
and nozzles (ISO 15012-2:2008); English version
of DIN EN ISO 15012-2:2008-06
DIN EN ISO 15607-2004 金属材料焊接程序规范和合格鉴定.总则 Specification
and qualification of welding procedures for
metallic materials - General rules (ISO 15607:2003);
German version EN ISO 15607:2003
DIN EN ISO 15609-1-2005 金属材料焊接程序的规范和合格鉴定.焊接程序规范.第1部分:弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 1: Arc welding (ISO 15609-1:2004); German
version EN ISO 15609-1:2004
DIN EN ISO 15609-2-2001 金属材料焊接程序规范和合格鉴定.焊接程序规范.第2部分:气焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 2: Gas welding (ISO 15609-2:2001); German
version EN ISO 15609-2:2001
DIN EN ISO 15609-3-2004 金属材料焊接程序的规范和合格评定.焊接程序规范.第3部分:电子束焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 3: Electron beam welding (ISO 15609-3:2004);
German version EN ISO 15609-3:2004
DIN EN ISO 15609-4-2009 金属材料焊接程序的规范和鉴定.焊接程序试验.第4部分:激光束焊接(ISO
15609-4:2009), DIN EN ISO 15609-4:2 Specification
and qualification of welding procedures for
metallic materials - Welding procedure specification
- Part 4: Laser beam welding (ISO 15609-4:2009);
English version of DIN EN ISO 15609-4:2009-10
DIN EN ISO 15609-5-2004 金属材料焊接程序的规范和合格评定.焊接程序规范.第5部分:电阻焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 5: Resistance welding (ISO 15609-5:2004);
German version EN ISO 15609-5:2004
DIN EN ISO 15610-2004 金属材料焊接过程的规范和合格鉴定.基于已试验过的焊接耗材的合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification based
on tested welding consumables (ISO 15610:2003);
German version EN ISO 15610:2003
DIN EN ISO 15611-2004 金属材料焊接程序规范和合格鉴定.根据已有的焊接经验进行合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification based
on previous welding experience (ISO 15611:2003);
German version EN ISO 15611:2003
DIN EN ISO 15612-2004 金属材料焊接程序的规范和合格评定.通过采用标准焊接程序的合格评定
Specification and qualification of welding procedures
for metallic materials - Qualification by adoption
of a standard welding procedure (ISO 15612:2004);
German version EN ISO 15612:2004
DIN EN ISO 15613-2004 金属材料焊接程序的规范和合格鉴定.基于生产前焊接试验的合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification based
on pre-production welding test (ISO 15613:2004);
German version EN ISO 15613:2004
DIN EN ISO 15614-1-2008 金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的弧焊和气焊以及镍和镍合金的弧焊(ISO
15614-1-200 Specification and qualification
of welding procedures for metallic materials
- Welding procedure test - Part 1: Arc and gas
welding of steels and arc welding of nickel
and nickel alloys (ISO 15614-1:2004+Amd 1:2008)(includes
Amendment A1:2008); English version of DIN EN
ISO 15614-1:2008-09
DIN EN ISO 15614-10-2005 金属材料焊接过程的规范和鉴定.焊接程序试验.第10部分:高压干焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 10: Hyperbaric dry welding (ISO 15614-10:2005);
German version EN ISO 15614-10:2005
DIN EN ISO 15614-11-2002 金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接
(ISO 15614-11:2002); 德文版本 EN Specification and
qualification of welding procedures for metallic
materials - Welding procedure test - Part 11:
Electron and laser beam welding (ISO 15614-11:2002);
German version EN ISO 15614-11:2002
DIN EN ISO 15614-12-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第12部分:点焊、缝焊和凸焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 12: Spot, seam and projection welding
(ISO 15614-12:2004); German version EN ISO 15614-12:2004
DIN EN ISO 15614-13-2005 金属材料焊接过程的规范和鉴定.焊接程序试验.第13部分:电阻对焊和闪光焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 13: Resistance butt and flash welding
(ISO 15614-13:2005); German version EN ISO 15614-13:2005
DIN EN ISO 15614-2-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.第2部分:铝及其合金的弧焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 2: Arc welding of aluminium and its alloys
(ISO 15614-2:2005); German version EN ISO 15614-2:2005
DIN EN ISO 15614-3-2008 金属材料焊接程序的规范和合格鉴定.焊接程序试验.第3部分:非合金和合金铸铁的氧炔焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 3: Fusion welding of non-alloyed and
low-alloyed cast irons (ISO 15614-3:2008); English
version of DIN EN ISO 15614-3:2008-06
DIN EN ISO 15614-4 Berichtigung 1-2008 金属材料焊接程序的规范和鉴定.焊接程序试验.第4部分:铝铸件的精工焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 4: Finishing welding of aluminium castings
(ISO 15614-4:2005); German version EN ISO 15614-4:2005,
Corrigenda to DIN EN ISO 15614-4:2005-09; German
version EN ISO 15614-4:2005/AC:2007
DIN EN ISO 15614-4-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.第4部分:铝铸件的精焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 4: Finishing welding of aluminium castings
(ISO 15614-4:2005); German version EN ISO 15614-4:2005
DIN EN ISO 15614-5-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 5: Arc welding of titanium, zirconium
and their alloys (ISO 15614-5:2004); German
version EN ISO 15614-5:2004
DIN EN ISO 15614-6-2007 金属材料焊接程序的规范和鉴定.焊接程序试验.第6部分:铜及其合金的电弧焊接和气焊(ISO
15614-6-2006) Specification and qualification
of welding procedures for metallic materials
- Welding procedure test - Part 6: Arc and gas
welding of copper and its alloys (ISO 15614-6:2006);
English version of DIN EN ISO 15614-6:2007-01
DIN EN ISO 15614-7-2007 金属材料焊接程序的规范和鉴定.焊接程序试验.第7部分:覆盖焊接(ISO
15614-7:2007) Specification and qualification
of welding procedures for metallic materials
- Welding procedure test - Part 7: Overlay welding
(ISO 15614-7:2007); English version of DIN EN
ISO 15614-7:2007-09
DIN EN ISO 15614-8-2002 金属材料焊接程序规范和资格.焊接程序试验.第8部分:管对管板连接件的焊接
(ISO 15614-8:2002); 德文版本 EN Specification and
qualification of welding procedures for metallic
materials - Welding procedure test - Part 8:
Welding of tubes to tube-plate joints (ISO 15614-8:2002);
German version EN ISO 15614-8:2002
DIN EN ISO 15615-2002 气体焊接设备.焊接、切割和相关工艺用乙炔总管.高压装置的安全要求
(ISO 15615:2002); 德文版本 EN ISO 156 Gas welding
equipment - Acetylene manifold systems for welding,
cutting and allied processes - Safety requirements
in high-pressure devices (ISO 15615:2002); German
version EN ISO 15615:2002
DIN EN ISO 15616-1-2003 高质量焊接和切割用CO2激光机验收试验.第1部分:通则和验收条件
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 1: General principles, acceptance conditions
(ISO 15616-1:2003); German version EN ISO 15616-1:2003
DIN EN ISO 15616-2-2003 高质量焊接和切割用CO2激光机验收试验.第2部分:静态和动态精度测定
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 2: Measurement of static and dynamic
accuracy (ISO 15616-2:2003); German version
EN ISO 15616-2:2003
DIN EN ISO 15616-3-2003 高质量焊接和切割用CO2激光机验收试验.第3部分:气体流量和压力测量仪校正
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 3: Calibration of instruments for measurement
of gas flow and pressure (ISO 15616-3:2003);
German version EN ISO 15616-3:2003
DIN EN ISO 15618-2-2002 水下焊工的资格测式.第2部分:高压干式焊接的水下焊工和焊接操作员
(ISO 15618-2:2001); 德文版本 EN ISO 15 Approval
testing of welders for under-water welding -
Part 2: Diver-welders and welding operators
for hyperbaric dry welding (ISO 15618-2:2001);
German version EN ISO 15618-2:2001
DIN EN ISO 15620-2000 焊接.金属材料的摩擦焊接 Welding -
Friction welding of metallic materials (ISO
15620:2000); German version EN ISO 15620:2000
DIN EN ISO 15630-2-2002 混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接构件
(ISO 15630-2:2002); 德文版本 EN ISO 15630-2:2002
Steel for the reinforcement and prestressing
of concrete - Test methods - Part 2: Welded
fabric (ISO 15630-2:2002); German version EN
ISO 15630-2:2002
DIN EN ISO 15792-1-2008 焊接消耗品.试验方法.第1部分:钢、镍和镍合金中全部焊接金属试样用试验方法
Welding consumables - Test methods - Part 1:
Test methods for all-weld metal test specimens
in steel, nickel and nickel alloys (ISO 15792-1:2000);
German version EN ISO 15792-1:2008
DIN EN ISO 15792-2-2008 焊接消耗品.试验方法.第2部分:钢的单道和双道焊接技术试样的制备
Welding consumables - Test methods - Part 2:
Preparation of single-run and two-run technique
test specimens in steel (ISO 15792-2:2000);
German version EN ISO 15792-2:2008
DIN EN ISO 15792-3-2008 焊接消耗品.试验方法.第3部分:角焊中焊接消耗品的填位能力和根部焊透层的分类测试(ISO
15792-3-2000包括技 Welding consumables - Test methods
- Part 3: Classification testing of positional
capacity and root penetration of welding consumables
in a fillet weld (ISO 15792-3:2000 including
Cor 1:2006); German version EN ISO 15792-3:2008
DIN EN ISO 16432-2007 电阻焊接.用凸焊工艺的涂覆和非涂覆低碳钢的凸焊程序
Resistance welding - Procedure for projection
welding of uncoated and coated low carbon steels
using embossed projection(s) (ISO 16432:2006);
English version of DIN EN ISO 16432:2007-09
DIN EN ISO 16433-2007 电阻焊接.涂覆和非涂覆低碳钢的缝焊用程序 Resistance
welding - Procedure for seam welding of uncoated
and coated low carbon steels (ISO 16433:2006);
German version EN ISO 16433:2007
DIN EN ISO 16834-2007 焊接消耗品.高强度钢气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类
Welding consumables - Wire electrodes, wires,
rods and deposits for gas-shielded arc welding
of high strength steels - Classification (ISO
16834:2006)English version of DIN EN ISO 16834:2007-05
DIN EN ISO 17632-2008 焊接消耗品.非合金和细晶粒钢的气体保护和无气体保护金属弧焊用管状芯焊条.分类
Welding consumables - Tubular cored electrodes
for gas shielded and non-gas shielded metal
arc welding of non-alloy and fine grain steels
- Classification (ISO 17632:2004); German version
EN ISO 17632:2008
DIN EN ISO 17633-2006 焊接用品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Welding consumables - Tubular cored electrodes
and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting
steels - Classification (ISO 17633:2004); English
version EN ISO 17633:2006-06
DIN EN ISO 17634-2006 焊接用品.气体保护金属弧焊耐儒变钢用管芯焊条.分类
Welding consumables - Tubular cored electrodes
for gas shielded metal arc welding of creep-resisting
steels - Classification (ISO 17634:2004); English
version of DIN EN ISO 17634:2006-06
DIN EN ISO 17641-1-2004 金属材料焊接的有损检验.焊件的热裂试验.弧焊过程.第1部分:通则
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - Part 1: General (ISO 17641-1:2004);
German version EN ISO 17641-1:2004
DIN EN ISO 17641-2-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第2部分:自束试验
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - Part 2: Self-restraint tests (ISO
17641-2:2005); German version EN ISO 17641-2:2005
DIN EN ISO 17642-1-2004 金属材料的焊接的有损试验.焊件的冷裂试验.弧焊过程.第1部分:通则
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Part 1: General (ISO 17642-1:2004);
German version EN ISO 17642-1:2004
DIN EN ISO 17642-2-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第2部分:自束试验
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Part 2: Self-restraint tests (ISO
17642-2:2005); German version EN ISO 17642-2:2005
DIN EN ISO 17642-3-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第3部分:外部荷载试验
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Part 3: Externally loaded tests
(ISO 17642-3:2005); German version EN ISO 17642-3:2005
DIN EN ISO 17652-1-2003 焊接.与焊接及相关工艺有关的底漆的试验.第1部分:一般要求
Welding - Test for shop primers in relation
to welding and allied processes - Part 1: General
requirements (ISO 17652-1:2003); German version
EN ISO 17652-1:2003
DIN EN ISO 17652-2-2003 焊接.与焊接及相关工艺有关的底漆的试验.第2部分:底漆的焊接性能
Welding - Test for shop primers in relation
to welding and allied processes - Part 2: Welding
properties of shop primers (ISO 17652-2:2003);
German version EN ISO 17652-2:2003
DIN EN ISO 17652-3-2003 焊接.与焊接及相关工艺有关的底漆的试验.第3部分:热切割
Welding - Test for shop primers in relation
to welding and allied processes - Part 3: Thermal
cutting (ISO 17652-3:2003); German version EN
ISO 17652-3:2003
DIN EN ISO 17652-4-2003 焊接.与焊接及相关工艺有关的底漆的试验.第4部分:焊接烟气的排放
Welding - Test for shop primers in relation
to welding and allied processes - Part 4: Emission
of fumes and gases (ISO 17652-4:2003); German
version EN ISO 17652-4:2003
DIN EN ISO 17657-1-2007 电阻焊.电阻焊用焊接电流测量.第1部分:测量指南(ISO
17657-1:2005) Resistance welding - Welding current
measurement for resistance welding - Part 1:
Guidelines for measurement (ISO 17657-1:2005);
English version of DIN EN ISO 17657-1:2007-09
DIN EN ISO 17657-2-2007 电阻焊.电阻焊用焊接电流测量.第2部分:电流感应线圈式焊接电流计(ISO
17657-2:2005) Resistance welding - Welding current
measurement for resistance welding - Part 2:
Welding current meter with current sensing coil
(ISO 17657-2:2005); English version of DIN EN
ISO 17657-2:2007-09
DIN EN ISO 17657-3-2007 电阻焊.电阻焊用焊接电流测量.第3部分:电流感应线圈(ISO
17657-3:2005) Resistance welding - Welding current
measurement for resistance welding - Part 3:
Current sensing coil (ISO 17657-3:2005); English
version of DIN EN ISO 17657-3:2007-09
DIN EN ISO 17657-4-2007 电阻焊.电阻焊用焊接电流测量.第4部分:校验系统(ISO
17657-4:2005) Resistance welding - Welding current
measurement for resistance welding - Part 4:
Calibration system (ISO 17657-4:2005); English
version of DIN EN ISO 17657-4:2007-09
DIN EN ISO 17657-5-2007 电阻焊.电阻焊用焊接电流测量.第5部分:焊接电流测量系统的验证(ISO
17657-5:2005) Resistance welding - Welding current
measurement for resistance welding - Part 5:
Verification of welding current measuring system
(ISO 17657-5:2005); English version of DIN EN
ISO 17657-5:2007-09
DIN EN ISO 17659-2005 焊接.图示焊接接头的多语种术语 Welding
- Multilingual terms for welded joints with
illustrations (ISO 17659:2002); Trilingual version
EN ISO 17659:2004
DIN EN ISO 17660-1 Berichtigung 1-2007 焊接.钢筋焊接.第1部分:承载焊接接头(ISO
17660-1-2006) Welding - Welding of reinforcing
steel - Part 1: Load-bearing welded joints (ISO
17660-1:2006); German version EN ISO 17660-1:2006,
Corrigenda to DIN EN ISO 17660-1:2006-12
DIN EN ISO 17660-1-2006 焊接.钢筋焊接.第1部分:承载焊接节点
Welding - Welding of reinforcing steel - Part
1: Load-bearing welded joints (ISO 17660-1:2006);
English version of DIN EN ISO 17660-1:2006-12
DIN EN ISO 17660-2 Berichtigung 1-2007 焊接.钢筋焊接.第2部分:非承载焊接接头(ISO
17660-2-2006) Welding - Welding of reinforcing
steel - Part 2: Non load-bearing welded joints
(ISO 17660-2:2006); German version EN ISO 17660-2:2006,
Corrigenda to DIN EN ISO 17660-2:2006-12
DIN EN ISO 17660-2-2006 焊接.钢筋焊接.第2部分:非承载焊接节点
Welding - Welding of reinforcing steel - Part
2: Non load-bearing welded joints (ISO 17660-2:2006);
English version of DIN EN ISO 17660-2:2006-12
DIN EN ISO 17662-2005 焊接.包含辅助活动的焊接用设备的校准、验证和证实
Welding - Calibration, verification and validation
of equipment used for welding, including ancillary
activities (ISO 17662:2005); German version
EN ISO 17662:2005
DIN EN ISO 17663-2009 焊接.与焊接和相关工艺有关的热处理的质量要求导则(ISO
17663:2009),DIN EN ISO 17663:2009-10的英文版本 Welding
- Quality requirements for heat treatment in
connection with welding and allied processes
(ISO 17663:2009); English version of DIN EN
ISO 17663:2009-10
DIN EN ISO 17677-1-2010 电阻焊接.词汇.第1部分:点焊、凸焊及缝焊(ISO
17677-1-2009).三种语言版本EN ISO 17677-1-2009 Resistance
welding - Vocabulary - Part 1: Spot, projection
and seam welding (ISO 17677-1:2009); Trilingual
Version EN ISO 17677-1:2009
DIN EN ISO 18273-2004 焊接消耗品.铝和铝合金焊接用焊丝电极、焊丝和焊棒.分类
Welding consumables - Wire electrodes, wires
and rods for welding of aluminium and aluminium
alloys - Classification (ISO 18273:2004); German
version EN ISO 18273:2004
DIN EN ISO 18274-2006 焊接消耗品.镍和镍合金熔焊用焊丝和条式电极、焊线和焊条.分类
Welding consumables - Wire and strip electrodes,
wires and rods for fusion welding of nickel
and nickel alloys - Classification (ISO 18274:2004
+ Cor. 1:2005); English version of DIN EN ISO
18274:2004 + AC:2006-05
DIN EN ISO 18276-2006 焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类
Welding consumables - Tubular cored electrodes
for gas-shielded and non-gas-shielded metal
arc welding of high strength steels - Classification
(ISO 18276:2005); English version of DIN EN
ISO 18276:2006-09
DIN EN ISO 18279-2004 铜焊.铜焊接头的缺陷 Brazing - Imperfections
in brazed joints (ISO 18279:2003); German version
EN ISO 18279:2003
DIN EN ISO 18592-2010 电阻焊接.焊接头的破坏性试验.多点焊接样品的疲劳试验用方法
Resistance welding - Destructive testing of
welds - Method for the fatigue testing of multi-spot-welded
specimens (ISO 18592:2009); German version EN
ISO 18592:2009
DIN EN ISO 18595-2007 电阻焊接.铝和铝合金的点焊.可焊性、焊接和测试
Resistance welding - Spot welding of aluminium
and aluminium alloys - Weldability, welding
and testing (ISO 18595:2007); English version
of DIN EN ISO 18595:2007-12
DIN EN ISO 21952-2008 焊接消耗品.抗蠕变钢的气体保护电弧焊接用丝状电极、焊丝、焊条和沉渍物.分类
Welding consumables - Wires electrodes, wires,
rods and deposits for gas-shielded arc welding
of creep-resisting steels - Classification (ISO
21952:2007); English version of DIN EN ISO 21952:2008-02
DIN EN ISO 22827-1-2006 Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第1部分:激光装配(ISO
22827-1-2005).德文版本 EN ISO Acceptance tests for
Nd:YAG laser beam welding machines - Machines
with optical fibre delivery - Part 1: Laser
assembly (ISO 22827-1:2005); English version
of DIN EN ISO 22827-1:2006-02
DIN EN ISO 22827-2-2006 Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第2部分:移动装置(ISO
22827-2-2005).德文版本 EN ISO Acceptance tests for
Nd:YAG laser beam welding machines - Machines
with optical fibre delivery - Part 2: Moving
mechanism (ISO 22827-2:2005); English version
of DIN EN ISO 22827-2:2006-02
DIN EN ISO 22829-2008 电阻焊接.带组合变压器的焊枪用变压器整流器.1000Hz频率工作的变压器整流器
Resistance welding - Transformer-rectifier for
welding guns with integrated transformers -
Transformer-rectifier units operating at 1000
Hz frequency (ISO 22829:2007); English version
of DIN EN ISO 22829:2008-06
DIN EN ISO 23279-2010 焊接点无损检测试验.超声波测试.焊接点的显示特征(ISO
23279-2010).德文版本EN ISO 23279-2010 Non-destructive
testing of welds - Ultrasonic testing - Characterization
of indications in welds (ISO 23279:2010); German
version EN ISO 23279:2010
DIN EN ISO 24034-2008 焊接消耗品.钛和钛合金熔焊用实芯焊丝和焊条.分类(ISO
24034:2005+Amd 1:2008) Welding consumables -
Solid wires and rods for fusion welding of titanium
and titanium alloys - Classification (ISO 24034:2005+Amd
1:2008)(includes Amendment A1:2008); English
version of DIN EN ISO 24034:2008-10
DIN EN ISO 24373-2009 焊接耗材.铜和铜合金熔焊用实芯焊丝和焊条.分类(ISO
24373:2008),DIN EN ISO 24373:2009-08的英文版本 Welding
consumables - Solid wires and rods for fusion
welding of copper and copper alloys - Classification
(ISO 24373:2008); English version of DIN EN
ISO 24373:2009-08
DIN EN ISO 24598-2008 焊接耗材.抗蠕变钢的潜弧焊用实心焊条、管状药芯焊条和电极/焊剂混合物
Welding consumables - Solid wire electrodes,
tubular cored electrodes and electrode/flux
combinations for submerged arc welding of creep-resisting
steels - Classification (ISO 24598:2007); English
version of DIN EN ISO 24598:2008-03
DIN EN ISO 2503-2009 气焊设备,300巴(30MPa)以下的焊接,切割和相关工艺中使用的气体瓶的压力调节器(ISO
2503:2009),EN ISO 2503: Gas welding equipment
- Pressure regulators and pressure regulators
with flow-metering devices for gas cylinders
used in welding, cutting and allied processes
up to 300 bar (30 MPa) (ISO 2503:2009); German
version EN ISO 2503:2009
DIN EN ISO 2560-2010 焊接材料.非合金钢和细粒钢的手工金属电弧焊接的涂敷焊条.分类(ISO
2560-2002); 德文版本EN ISO 2560-2005 Welding consumables
- Covered electrodes for manual metal arc welding
of non-alloy and fine grain steels - Classification
(ISO 2560:2009); German version EN ISO 2560:2009
DIN EN ISO 26304-2009 焊接耗材高强度钢的潜弧焊用实心焊丝,管状芯焊条和焊条.焊剂组合制品分类(ISO
26304:2008,包括勘误1:2009), Welding consumables
- Solid wire electrodes, tubular cored electrodes
and electrode-flux combinations for submerged
arc welding of high strength steels - Classification
(ISO 26304:2008, including Cor 1:2009); English
version of DIN EN ISO 26304:2009-11
DIN EN ISO 3580-2008 焊接消耗品.抗蠕变钢的手工金属电弧焊接用涂敷焊条.分类
Welding consumables - Covered electrodes for
manual metal arc welding of creep-resisting
steels - Classification (ISO 3580:2004); German
version EN ISO 3580:2008
DIN EN ISO 3690-2001 焊接及相关工艺.钢铁电弧焊接金属中氢含量的测定
Welding and allied processes - Determination
of hydrogen content in ferritic arc weld metal
(ISO 3690:2000); German version EN ISO 3690:2000
DIN EN ISO 4063-2000 焊接和相工艺.工艺名称和参照代码 Welding
and allied processes - Nomenclature of processes
and reference numbers (ISO 4063:1998); German
version EN ISO 4063:2000
DIN EN ISO 5172-2006 焊接,切割和加热气焊用焊枪.规范和试验 Gas
welding equipment - Blowpipes for gas welding,
heating and cutting - Specifications and tests
(ISO 5172:2006) English version of DIN EN ISO
5172:2006-08
DIN EN ISO 5173-2010 金属材料焊接点无损检测试验.弯曲试验(ISO
5173-2009).德文版本EN ISO 5173-2010 Destructive
tests on welds in metallic materials - Bend
tests (ISO 5173:2009); German version EN ISO
5173:2010
DIN EN ISO 5183-1-2000 电阻焊接设备.外锥度1:10电极接头.第1部分:锥度1:10圆锥形接头
Resistance welding equipment - Electrode adaptors,
male taper 1:10 - Part 1: Conical fixing, taper
1:10 (ISO 5183-1:1998); German version EN ISO
5183-1:2000
DIN EN ISO 544-2004 焊接消耗品.焊接填充金属的技术交货条件.产品类型、尺寸、公差和标记
Welding consumables - Technical delivery conditions
for welding filler metals - Type of product,
dimensions, tolerances and marking (ISO 544:2003);
German version EN ISO 544:2003
DIN EN ISO 5817 Berichtigung 1-2007 焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级.技术勘误DIN
EN ISO 5817-2006 Welding - Fusion-welded joints
in steel, nickel, titanium and their alloys
(beam welding excluded) - Quality levels for
imperfections (ISO 5817:2003 + Cor. 1:2006);
German version EN ISO 5817:2003 + AC:2006, Corrigenda
to DIN EN ISO 5817:2006-10
DIN EN ISO 5817-2006 焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级(ISO
5817-2003 + Cor.1-2006) Welding - Fusion-welded
joints in steel, nickel, titanium and their
alloys (beam welding excluded) - Quality levels
for imperfections (ISO 5817:2003 + Cor. 1:2006);
German version EN ISO 5817:2007
DIN EN ISO 5821-2010 电阻焊接.点焊电极帽接头 Resistance
welding - Spot welding electrode caps (ISO 5821:2009);
German version EN ISO 5821:2009
DIN EN ISO 636-2008 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和沉积物.分类
Welding consumables - Rods, wires and deposits
for tungsten inert gas welding of non-alloy
and fine-grain steels - Classification (ISO
636:2004); German version EN ISO 636:2008
DIN EN ISO 6520-1-2007 焊接及相关工艺.金属材料几何缺陷分类.第1部分:氧炔焊
Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Part 1: Fusion welding (ISO 6520-1:2007);
Trilingual version EN ISO 6520-1:2007
DIN EN ISO 6520-2-2002 焊接及相关工艺.金属材料中几何缺陷的分类.第2部分:压力焊(ISO
6520-2:2001); 德文版本 EN ISO 6520-2:2001 Welding
and allied processes - Classification of geometric
imperfections in metallic materials - Part 2:
Welding with pressure (ISO 6520-2:2001); German
version EN ISO 6520-2:2001
DIN EN ISO 6847-2002 焊料.化学分析用焊接金属块的沉积(ISO 6847:2000);
德文版本 EN ISO 6847:2001 Welding consumables -
Deposition of a weld metal pad for chemical
analysis (ISO 6847:2000); German version EN
ISO 6847:2001
DIN EN ISO 6848-2005 电弧焊接和切割.非自耗钨电极.分类 Arc welding
and cutting - Nonconsumable tungsten electrodes
- Classification (ISO 6848:2004); German version
EN ISO 6848:2004
DIN EN ISO 7291-2001 气焊设备.焊接、切割和同类过程中多种系统的调压器(调压范围不超过300
bar) Gas welding equipment - Pressure regulators
for manifold systems used in welding, cutting
and allied processes up to 300 bar (ISO 7291:1999);
German version EN ISO 7291:2001
DIN EN ISO 7539-8-2008 金属和合金的腐蚀.应力腐蚀试验.第8部分:焊接件评定用试样的制备和使用
Corrosion of metals and alloys - Stress corrosion
testing - Part 8: Preparation and use of specimens
to evaluate weldments (ISO 7539-8:2000); German
version EN ISO 7539-8:2008
DIN EN ISO 8205-1-2003 电阻焊接水冷次级线圈连接电缆.第1部分:双导体连接电缆的尺寸和要求
Water-cooled secondary connection cables for
resistance welding - Part 1: Dimensions and
requirements for double-conductor connection
cables (ISO 8205-1:2002); German version EN
ISO 8205-1:2002
DIN EN ISO 8249-2000 焊接.奥氏体和双重铁素体-奥氏体铬镍(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals (ISO 8249:2000);
German version EN ISO 8249:2000
DIN EN ISO 9539-2010 气焊设备.气体焊接、切割和相关工艺过程用设备的材料
Gas welding equipment - Materials for equipment
used in gas welding, cutting and allied processes
(ISO 9539:2010); German version EN ISO 9539:2010
DIN EN ISO 9692-1-2004 焊接和相关工艺.接口准备的建议.第1部分:钢的手工金属弧焊接、气体保护金属弧焊接、气焊、TIG焊接和缝焊
Welding and allied processes - Recommendations
for joint preparation - Part 1: Manual metal-arc
welding, gas-shielded metal-arc welding, gas
welding, TIG welding and beam welding of steels
(ISO 9692-1:2003); German version EN ISO 9692-1:2003
DIN EN ISO 9692-2-1999 焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊（ISO
9692-2-1998,包括技术勘误AC-1999) Welding and allied
processes - Joint preparation - Part 2: Submerged
arc welding of steels (ISO 9692-2:1998, includes
Corrigendum AC:1999); German version EN ISO
9692-2:1998 + AC:1999
DIN EN ISO 9692-3-2001 焊接和相关工艺.焊缝准备推荐标准.第3部分:铝和铝合金的金属极惰性气体保护焊和钨极惰性气体保护焊
Welding and allied processes - Recommendations
for joint preparation - Part 3: Metal inert
gas welding und tungsten inert gas welding of
aluminium and its alloys (ISO 9692-3:2001);
German version EN ISO 9692-3:2001
DIN EN ISO 9692-4-2003 焊接和相关工艺.接头准备的推荐标准.第4部分:复合钢
Welding and allied processes - Recommendations
for joint preparation - Part 4: Clad steels
(ISO 9692-4:2003); German version EN ISO 9692-4:2003
DIN ISO 10656-2006 电阻焊接.焊枪用集成变压器(ISO 10656-1996,
包括技术勘误表 1-2000) Electric resistance welding
- Integrated transformers for welding guns (ISO
10656:1996, including Technical Corrigendum
1:2000);English version of DIN ISO 10656:2006-02
DIN ISO 10763-2004 液压传动.端面平齐的无缝和焊接型精密钢管.尺寸和标称工作压力
Hydraulic fluid power - Plain-end, seamless
and welded precision steel tubes - Dimensions
and nominal working pressures (ISO 10763:1994)
DIN ISO 12145-1999 电阻焊接设备.点焊电极的安装角度 Resistance
welding equipment - Angles for mounting spot
welding electrodes (ISO 12145:1998)
DIN ISO 22826-2008 金属材料焊缝的破坏性试验.使用激光和电子束焊接的窄接头硬度试验(维氏和努氏硬度试验)
Destructive tests on welds in metallic materials
- Hardness testing of narrow joints welded by
laser and electron beam (Vickers and Knoop hardness
tests) (ISO 22826:2005)
DIN ISO 24394-2009 航空航天设施用焊接 焊接工和焊接操作工用认证试验
金属部件的熔焊 Welding for aerospace applications -
Qualification test for welders and welding operators
- Fusion welding of metallic components (ISO
24394:2008); English version of DIN ISO 24394:2009-04
DIN ISO 857-2-2007 焊接和相关工艺.词汇.第2部分:软钎焊和铜焊工艺及相关术语
Welding and allied processes - Vocabulary -
Part 2: Soldering and brazing processes and
related terms (ISO 857-2:2005) English version
of DIN ISO 857-2:2007-03
DIN ISO/TS 15011-5-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的试验室方法.第5部分:通过完全或部分有机材料组成的产品焊接或
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 5: Identification of thermal-degradation
products generated when welding or cutting through
products composed wholly and partly of organic
materials (ISO/TS 15011-5:2006); German version
CEN ISO/TS 15011-5:2006
DIN ISO/TS 17845-2005 焊接及相关工艺.缺陷的名称与符号系统 Welding
and allied processes - Designation system for
imperfections (ISO/TS 17845:2004); Trilingual
version CEN ISO/TS 17845:2004
DIN SPEC 1097-2009 材料分组系统.焊接.欧洲材料 Welding -
Grouping systems for materials - European materials
(ISO/TR 20172:2009); German version CEN ISO/TR
20172:2009
DIN SPEC 1116-2010 焊接.材料分组系统.美国材料(ISO/TR 20173-2009);
德文版本 CEN ISO/TR 20173-2009 Welding - Grouping
systems for materials - American materials (ISO/TR
20173:2009); German version CEN ISO/TR 20173:2009
DIN V 2308-2004 焊接.工作位置.现行国际、欧洲和美国的标识比较 Welding
- Working positions - Comparison of current
international, European and US designations;
German version CEN/TR 14633:2003
DIN V 32528-1999 高技术陶瓷.气体焊接设备.火焰加热和相关工艺用的手动和机器作动的工业氧气燃气吹风管
Gas welding equipment - Industrial manual and
machine oxygen-fuel gases blowpipes for flame
heating and allied processes (CR 13259:1998)
DIN VDE 0250-605-2006 焊接用品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Cables, wires and flexible cords for power install
- Part 605: Screened flexible cable with rubber
insulation and PVC sheath nominal voltage U<(Index)0>/U
3,6/6 kV and 6/10 kV
DIN VDE 0544-100-1983 电弧焊及类似程序用焊接设备和组件.操作安全技术要求.[VDE
规范] Welding equipment and assemblies for arc
welding and similar procedures; safety requirements
for operation [VDE Specification]
DIN VDE 0544-101-1983 电弧焊及类似工艺用焊接设备和组件.设备安全性要求.规范
Welding equipment and assemblies for arc welding
and similar procedures; safety requirements
for installation [VDE Specification]
DIN-Fachbericht 17641-3-2004 金属材料焊接的有损检验.焊件的热裂纹试验.弧焊过程.第3部分:外部负载试验
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - Part 3: Externally loaded test (ISO/TR
17641-3:2004); German translation of CEN ISO/TR
17641-3:2004
DIN-Fachbericht CEN ISO/TR 15608-2006 焊接.金属材料分类体系指南
Welding - Guidelines for a metallic materials
grouping system;German version CEN ISO/TR 15608:2005
DIN-Fachbericht CEN ISO/TR 17844-2004 焊接.防止冷裂的标准化方法的比较
Welding - Comparison of standardised methods
for the avoidance of cold cracks (ISO/TR 17844:2004);
German translation of CEN ISO/TR 17844:2004
DIN-Fachbericht CEN ISO/TR 20174-2006 焊接.材料分组系统.日本材料(ISO/TR
20174:2005) Welding - Grouping systems for materials
- Japanses materials (ISO/TR 20174:2005); German
version CEN ISO/TR 20174:2005
DIN-Fachbericht CEN/TR 14599-2005 与EN 1792有关的焊接术语和定义
Terms and definitions for welding purposes in
relation with EN 1792; Trilingual version CEN/TR
14599:2005
DIN-Fachbericht CEN/TR 15235-2006 焊接.金属建筑中的不完整性的评价法
Welding - Methods for assessing imperfections
in metallic structures; German version CEN/TR
15235:2005
DIN-Fachbericht ISO/TR 25901-2008 焊接和相关工艺.词汇
Welding and related processes - Vocabulary
欧洲焊接标准(EN welding standards)
--------------------------------------------------------------------------------
编号 中文名称 英文名称
CR 12361-1996 金属材料焊接的破坏性试验 宏观和微观检验用腐蚀剂 Destructive
tests on welds in metallic materials - Etchants
for macroscopic and microscopic examination
CR 14599-2002 与EN 1792相关的焊接的术语及定义 Terms and
definitions for welding purposes in relation
with EN 1792
CR ISO 15608-2000 焊接 金属材料分类体系指南（ISO/TR 15608:2000）
Welding - Guidelines for a metallic material
grouping system (ISO/TR 15608:2000)
CR ISO 17663-2001 焊接 焊接和类似加工热处理质量要求指南（ISO/TR
17663:2001） Welding - Guidelines for quality
requirements for heat treatment in connection
with welding and allied processes (ISO/TR 17663:2001)
EN 1011-1-1998+A1-2002 焊接 金属材料焊接的推荐规范 第1部分：电弧焊接的通用指南
Welding - Recommendations for welding of metallic
materials - Part 1: General guidance for arc
welding
EN 1011-2-2001 焊接 金属材料焊接的推荐规范 第2部分：铁素体钢的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 2: Arc welding of ferritic
steels
EN 1011-3-2000 焊接 金属材料焊接的推荐规范 第3部分：不锈钢的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 3: Arc welding of stainless
steels
EN 1011-4-2000 焊接 金属材料焊接的推荐规范 第4部分：铝和铝合金的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 4: Arc welding of aluminium
and aluminium alloys
EN 1011-5-2003 焊接 金属材料焊接的推荐规范 第5部分：复层钢焊接 Welding
- Recommendations for welding of metallic materials
- Part 5: Welding of clad steel
EN 10120-1996 焊接气瓶用钢薄板及带材 Steel sheet and strip
for welded gas cylinders
EN 10217-1-2002 压力用途的焊接钢管 交货技术条件 第1部分：有规定室温特性的非合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 1: Non-alloy steel
tubes with specified room temperature properties
EN 10217-2-2002 压力用途的焊接钢管 交货技术条件 第2部分：有规定高温特性的电焊非合金及合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 2: Electric welded
non-alloy and alloy steel tubes with specified
elevated temperature properties
EN 10217-3-2002 压力用途的焊接钢管 交货技术条件 第3部分：合金细晶粒钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 3: Alloy fine grain
steel tubes
EN 10217-4-2002 压力用途的焊接钢管 交货技术条件 第4部分：有规定低温特性的电焊非合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 4: Electric welded
non-alloy steel tubes with specified low temperature
properties
EN 10217-5-2002 压力用途的焊接钢管 交货技术条件 第5部分：有规定高温特性的埋弧焊非合金及合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 5: Submerged arc
welded non-alloy and alloy steel tubes with
specified elevated temperature properties
EN 10217-6-2002 压力用途的焊接钢管 交货技术条件 第6部分：有规定低温特性的埋弧焊非合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 6: Submerged arc
welded non-alloy steel tubes with specified
low temperature properties
EN 10219-1-1997 冷成型细晶粒钢和非合金钢的焊接结构空心型材 第1部分：交货技术要求
Cold formed welded structural hollow sections
of non-alloy and fine grain steels - Part 1:
Technical delivery requirements
EN 10219-2-1997 冷成型细晶粒钢和非合金钢的焊接结构空心型材 第2部分：公差、尺寸和截面特性
Cold formed welded structural hollow sections
of non-alloy and fine grain steels - Part 2:
Tolerances, dimensions and sectional properties
EN 10220-2002 无缝和焊接钢管 单位长度的尺寸和质量 Seamless and
welded steel tubes - Dimensions and masses per
unit length
EN 10223-4-1998 栅栏用钢丝和钢丝制品 钢丝焊接网式栅栏 Steel wire
and wire products for fences - Part 4: Steel
wire welded mesh fencing
EN 10223-7-2002 栅栏用钢丝和钢丝制品 第7部分：栅栏用钢丝焊接板 Steel
wire and wire products for fences - Part 7:
Steel wire welded panels for fencing
EN 10225-2001 固定海上结构用的可焊接结构钢 交货技术条件 Weldable
structural steels for fixed offshore structures
- Technical delivery conditions
EN 10246-1-1996 钢管的无损检测 第1部分：证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验
Non destructive testing of steel tubes - Part
1: Automatic electromagnetic testing of seamless
and welded (except submerged arc welded) ferromagnetic
steel tubes for verification of hydraulic leak-tightness
EN 10246-11-2000 钢管的无损检测 第11部分：表面缺陷探测用的无缝和焊接钢管的液体渗透检验
Non-destructive testing of steel tubes - Part
11: Liquid penetrant testing of seamless and
welded steel tubes for the detection of surface
imperfections
EN 10246-12-2000 钢管的无损检测 第12部分：表面缺陷探测用的无缝和焊接铁磁钢管的磁粉检验
Non-destructive testing of steel tubes - Part
12: Magnetic particle inspection of seamless
and welded ferromagnetic steel tubes for the
detection of surface imperfections
EN 10246-13-2000 钢管的无损检测 第13部分：无缝和焊接钢管（埋弧焊除外）自动全周界厚度的超声检验
Non-destructive testing of steel tubes - Part
13: Automatic full peripheral ultrasonic thickness
testing for seamless and welded (except submerged
arc welded) steel tubes
EN 10246-14-1999 钢管的无损检测 第14部分：层状缺陷探测用的无缝和焊接钢管(埋弧焊接除外)的自动超声检验
Non-destructive testing of steel tubes - Part
14: Automatic ultrasonic testing of seamless
and welded (except submerged arc-welded) steel
tubes for the detection of laminar imperfections
EN 10246-15-2000 钢管的无损检测 第15部分：层状缺陷探测用的制造焊接钢管用钢带/钢板的自动超声检验
Non-destructive testing of steel tubes - Part
15: Automatic ultrasonic testing of strip/plate
used in the manufacture of welded steel tubes
for the detection of laminar imperfections
EN 10246-16-2000 钢管的无损检测 第16部分：层状缺陷探测用的焊接钢管焊缝附近区域的自动超声检验
Non-destructive testing of steel tubes - Part
16: Automatic ultrasonic testing of the area
adjacent to the weld seam of welded steel tubes
for the detection of laminar imperfections
EN 10246-17-2000 钢管的无损检测 第17部分：层状缺陷探测用的无缝和焊接钢管端部的自动超声检验
Non-destructive testing of steel tubes - Part
17: Ultrasonic testing of tube ends of seamless
and welded steel tubes for the detection of
laminar imperfections
EN 10246-18-2000 钢管的无损检测 第18部分：层状缺陷探测用的无缝和焊接铁磁钢管端部的磁粉检验
Non-destructive testing of steel tubes - Part
18: Magnetic particle inspection of the tube
ends of seamless and welded ferromagnetic steel
tubes for the detection of laminar imperfections
EN 10246-2-2000 钢管的无损检测 第2部分：证明液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管（埋弧焊除外）
的自动涡流 Non-destructive testing of steel tubes
- Part 2: Automatic eddy current testing of
seamless and welded (except submerged arc-welded)
austenitic and austenitic-ferritic steel tubes
for verification of hydraulic leak-tightness
EN 10246-3-1999 钢管的无损检测 第3部分：缺陷探测用无缝和焊接钢管(埋弧焊除外)的自动涡流检验
Non-destructive testing of steel tubes - Part
3: Automatic eddy current testing of seamless
and welded (except submerged arc-welded) steel
tubes for the detection of imperfections
EN 10246-4-1999 钢管的无损检测 第4部分：横向缺陷探测用无缝或焊接铁磁钢管的（埋弧焊除外）自动全周界磁传感器检验漏磁
Non-destructive testing of steel tubes - Part
4: Automatic full peripheral magnetic transducer/flux
leakage testing of seamless ferromagnetic steel
tubes for the detection of transverse imperfections
EN 10246-5-1999 钢管的无损检测 第5部分：径向缺陷探测用无缝或焊接铁磁钢管的（埋弧焊除外）自动全周界磁传感器检验漏磁
Non-destructive testing of steel tubes - Part
5: Automatic full peripheral magnetic transducer/flux
leakage testing of seamless and welded (except
submerged arc welded) ferromagnetic steel tubes
for the detection of longitudinal imperfections
EN 10246-7-1996 钢管的无损检测 第7部分：纵向缺陷探测用的无缝和焊接铁磁钢管(埋弧焊除外)的自动周界超声检验
Non destructive testing of steel tubes - Part
7: Automatic full peripheral ultrasonic testing
of seamless and welded (except submerged arc
welded) steel tubes for the detection of longitudinal
imperfections
EN 10273-2000 压力用途的规定高温度性能的热轧可焊接钢棒 Hot rolled
weldable steel bars for pressure purposes with
specified elevated temperature properties
EN 10296-1-2003 机械和一般工程用途的焊接圆形钢管 交货技术条件 第1部分：非合金钢管和合金钢管
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Part 1: Non-alloy and alloy steel
tubes
EN 10305-2-2002 高精密度用途的钢管 交货技术条件 第2部分：冷拔焊接钢管
Steel tubes for precision applications - Technical
delivery conditions - Part 2: Welded cold drawn
tubes
EN 10305-3-2002 高精密度用途的钢管 交货技术条件 第3部分：冷定径焊接钢管
Steel tubes for precision applications - Technical
delivery conditions - Part 3: Welded cold sized
tubes
EN 10305-5-2003 高精密度用途的钢管 交货技术条件 第5部分：冷定径方形和矩形焊接钢管
Steel tubes for precision applications - Technical
delivery conditions - Part 5: Welded and cold
sized square and rectangular tubes
EN 10312-2002 传送人类消耗的含水液体（包括水）的焊焊接不锈钢管 交货技术条件
Welded stainless steel tubes for the conveyance
of aqueous liquids including water for human
consumption - Technical delivery conditions
EN 1043-1-1995 金属材料焊接的破坏试验 硬度测试 第1部分：电弧焊接连接件的硬度试验
Destructive tests on welds in metallic materials
- Hardness testing - Part 1: Hardness test on
arc welded joints
EN 1043-2-1996 金属材料焊接的破坏试验 硬度试验 第2部分：焊接连接件的显微硬度测试
Destructive tests on welds in metallic materials
- Hardness test - Part 2: Micro hardness testing
on welded joints
EN 1123-1-1999 废水系统用带套管的纵向焊接热浸镀锌钢管管道及配件 第1部分：要求、测试和质量控制
Pipes and fittings of longitudinally welded
hot-dip galvanized steel pipes with spigot and
socket for waste water systems - Part 1: Requirements,
testing, quality control
EN 1123-1/prA1-2002 废水系统用带套管的纵向焊接热浸镀锌钢管管道及配件
第1部分：要求、测试和质量控制 修改A1 Pipes and fittings of longitudinally
welded hot-dip galvanized steel pipes with spigot
and socket for waste water systems - Part 1:
Requirements, testing, quality control; Amendment
A1
EN 1123-2-1999 废水系统用带套管和插口的纵向焊接热浸镀锌钢管管道及配件 第2部分：尺寸
Pipes and fittings of longitudinally welded
hot-dip galvanized steel pipes with spigot and
socket for waste water systems - Part 2: Dimensions
EN 1124-1-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分：要求、测试、质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 1: Requirements,
testing, quality control
EN 1124-1/prA1-2002 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件
第1部分：要求、测试、质量控制 修改A1 Pipes and fittings of longitudinally
welded stainless steel pipes with spigot and
socket for waste water systems - Part 1: Requirements,
testing, quality control; Amendment A1
EN 1124-2-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道和配件 第2部分：系统S
尺寸 Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 2: System S -
Dimensions
EN 1124-3-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第3部分：系统X
尺寸 Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 3: System X -
Dimensions
EN 12062-1997 焊接无损检测 金属材料的一般规则 Non-destructive
examination of welds - General rules for metallic
materials
EN 12070-1999 焊接易耗品 耐蠕变钢的电弧焊用丝状焊条、金属丝和棒 分级 Welding
consumables - Wire electrodes, wires and rods
for arc welding of creep-resisting steels -
Classification
EN 12071-1999 焊接易耗品 耐蠕变钢的气体遮蔽金属电弧焊用管状焊条 分级 Welding
consumables - Tubular cored electrodes for gas
shielded metal arc welding of creep-resisting
steels - Classification
EN 12072-1999 焊接易耗品 不锈钢和耐热钢电弧焊用丝状焊条、金属丝和棒 分级
Welding consumables - Wire electrodes, wires
and rods for arc welding of stainless and heat-resisting
steels - Classification
EN 12073-1999 焊接易耗品 不锈钢和耐热钢有或无气体遮蔽金属电弧焊接用管状有芯焊条 分级
Welding consumables - Tubular cored electrodes
for metal arc welding with or without a gas
shield of stainless and heat-resisting steels
- Classification
EN 12074-2000 焊接易耗品 对焊接及有关工艺用易耗品的制造、供应和分配的质量要求
Welding consumables - Quality requirements for
manufacture, supply and distribution of consumables
for welding and allied processes
EN 12345-1998 焊接 带图示的有关焊接接头的多语种术语 Welding -
Multilingual terms for welded joints with illustrations
EN 12493-2001 液化石油气（ＬＰＧ）用焊接钢罐 油槽车设计和制造 Welded
steel tanks for liquefied petroleum gas (LPG)
- Road tankers - Design and manufacture
EN 12517-1998 焊缝的无损检验 焊接接头放射线检验 验收等级 Non-destructive
examination of welds - Radiographic examination
of welded joints - Acceptance levels
EN 12534-1999 焊接消耗品 高强度钢气体保护金属电弧焊用丝状电极、焊丝和焊条和沉渍物
分类 Welding consumables - Wire electrodes, wires,
rods and deposits for gas shielded metal arc
welding of high strength steels - Classification
EN 12535-2000 焊接消耗品 高强度钢气体保护金属电弧焊用管型药芯焊条 分类
Welding consumables - Tubular cored electrodes
for gas shielded metal arc welding of high strength
steels - Classification
EN 12536-2000 焊接消耗品 非合金钢和抗蠕变钢气焊用焊条 分类 Welding
consumables - Rods for gas welding of non alloy
and creep-resisting steels - Classification
EN 1254-1-1998 铜和铜合金 管件 第1部分：低温焊接或纤焊接到铜管上的毛细管用端头管件
Copper and copper alloys - Plumbing fittings
- Part 1: Fittings with ends for capillary soldering
or capillary brazing to copper tubes
EN 12542-2002 地上的容积不大于13m3 立方米贮存液化石油气（ＬＰＧ）用静止的焊接圆形钢罐 设计和制造
Static welded steel cylindrical tanks, serially
produced for the storage of Liquified Petroleum
Gas (LPG) having a volume not greater than 13
m<(hoch)3> and for installation above
ground - Design and manufacture
EN 1256-1996 气焊设备 焊接切割及类似加工设备的软管附件规范 Gas welding
equipment - Specification for hose assemblies
for equipment for welding, cutting and allied
processes
EN 12573-1-2000 静态无压焊接热塑料罐 第1部分：概述 Welded static
non-pressurized thermoplastic tanks - Part 1:
General principles
EN 12573-2-2000 静态无压焊接热塑料罐 第2部分：立式圆筒罐的计算 Welded
static non-pressurized thermoplastic tanks -
Part 2: Calculation of vertical cylindrical
tanks
EN 12573-3-2000 静态无压焊接热塑料罐 第3部分：单层矩形罐的设计和计算
Welded static non-pressurized thermoplastic
tanks - Part 3: Design and calculation for single
skin rectangular tanks
EN 12573-4-2000 静态无压焊接热塑料罐 第4部分：法兰接头的设计和计算 Welded
static non-pressurized thermoplastic tanks -
Part 4: Design and calculation of flanged joints
EN 12732-2000 燃气供应系统 焊接钢管 功能要求 Gas supply systems
- Welding steel pipework - Functional requirements
EN 12760-1999 阀门 钢阀门套接焊接端 Valves - Socket welding
ends for steel valves
EN 12797-2000 铜焊 铜焊接头的破坏性试验 Brazing - Destructive
tests of brazed joints
EN 12799-2000 铜焊 铜焊接头的破坏性试验 Brazing - Non-destructive
examination of brazed joints
EN 12814-1-1999+AC-2003 热塑性塑料半成品的焊接接头试验 第1部分：弯曲试验
Testing of welded joints of thermoplastics semi-finished
products - Part 1: Bend test
EN 12814-2-2000 热塑性塑料半成品的焊接接头试验 第2部分：拉伸试验 Testing
of welded joints of thermoplastics semi-finished
products - Part 2: Tensile test
EN 12814-3-2000 热塑性塑料半成品的焊接接头试验 第3部分：拉伸蠕变试验
Testing of welded joints of thermoplastics semi-finished
products - Part 3: Tensile creep test
EN 12814-4-2001 热塑性塑料半成品的焊接接头试验 第4部分：剥落试验 Testing
of welded joints of thermoplastics semi-finished
products - Part 4: Peel test
EN 12814-5-2000 热塑性塑料半成品的焊接接头试验 第5部分：目测 Testing
of welded joints of thermoplastics semi-finished
- Part 5: Macroscopic examination
EN 12814-6-2000 热塑性塑料半成品的焊接接头试验 第6部分：低温拉伸试验
Testing of welded joints of thermoplastics semi-finished
products - Part 6: Low temperature tensile test
EN 12814-7-2002 热塑性塑料半成品的焊接接头试验 第7部分：采用腰形试样的拉伸试验
Testing of welded joints of thermoplastics semi-finished
products - Part 7: Tensile test with waisted
test specimens
EN 12814-8-2001+AC-2003 热塑性塑料半成品的焊接接头试验 第8部分：要求
Testing of welded joints of thermoplastics semi-finished
products - Part 8: Requirements
EN 12862-2000 可运输气瓶 可移动再充式焊接铝合金气瓶的设计和结构规范 Transportable
gas cylinders - Specification for the design
and construction of refillable transportable
welded aluminium alloy gas cylinders
EN 1289-1998+A1-2002 焊接的无损检验 焊接的熔深试验 验收等级 Non-destructive
examination of welds - Penetrant testing of
welds - Acceptance levels
EN 1290-1998+A1-2002 焊接的无损检验 焊接的磁性粒子检验 Non-destructive
examination of welds - Magnetic particle examination
of welds
EN 1291-1998+A1-2002 焊接的无损检验 焊接的磁性粒子试验 验收等级
Non-destructive examination of welds - Magnetic
particle testing of welds - Acceptance levels
EN 13067-2003 塑料焊接人员 焊工资质测试 热塑性塑料焊接组件 Plastics
welding personnel - Qualification testing of
welders - Thermoplastics welded assemblies
EN 13100-1-1999 热塑性塑料半成品焊接接头的无损检验 第1部分：外观检查
Non destructive testing of welded joints of
thermoplastics semi-finished products - Part
1: Visual examination
EN 13110-2002 可移动再充式焊接液化石油气铝瓶 设计和构造 Transportable
refillable welded aluminium cylinders for liquefied
petroleum gas - Design and construction
EN 1320-1996 金属材料焊接的破坏试验 断裂试验 Destructive tests
on welds in metallic materials - Fracture test
EN 1321-1996 金属材料焊接的破坏试验 焊接的宏观和微观检验 Destructive
tests on welds in metallic materials - Macroscopic
and microscopic examination of welds
EN 1326-1996 气焊设备 气体钎焊和定位焊接用小型设备 Gas welding
equipment - Small kits for gas brazing and welding
EN 1327-1996 气焊设备 焊接和相关工艺用热塑软管 Gas welding equipment
- Thermoplastic hoses for welding and allied
processes
EN 13322-1-2003 可移动气瓶 再充式焊接钢气瓶 设计与结构 第1部分：碳钢
Transportable gas cylinders - Refillable welded
steel gas cylinders; Design and construction
- Part 1: Carbon steel
EN 13322-2-2003 可移动气瓶 再充式焊接不锈钢气瓶 设计与结构 第2部分：不锈钢
Transportable gas cylinders - Refillable welded
steel gas cylinders; Design and construction
- Part 2: Stainless steel
EN 13347-2002 铜和铜合金 焊接和黄铜焊用棒和线 Copper and copper
alloys - Rod and wire for welding and braze
welding
EN 13918-2003 气焊设备 焊接、切割及关工艺中所用的气瓶上的集成流量计调压器
分类、规范和试验方法 Gas welding equipment - Integrated
flowmeter regulators used on cylinders for welding,
cutting and allied processes - Classification,
specification and tests
EN 14075-2002 系列生产的液化石油气（LPG）储存量不大于13立方米的安装在地下的固定式焊接钢圆罐 设计和制造
Static welded steel cylindrical tanks, serially
produced for the storage of Liquefied Petroleum
Gas (LPG) having a volume not greater than 13
m<(hoch)3> and for installation underground
- Design and manufacture
EN 14140-2003 可运输的可重复充装的焊接液化石油气钢瓶 （LPG） 设计和结构的选择
Transportable refillable welded steel cylinders
for Liquefied Petroleum Gas (LPG) - Alternative
design and construction
EN 14163-2001 石油和天然气工业 管道运输系统 管道的焊接 Petroleum
and natural gas industries - Pipeline transportation
systems - Welding of pipelines (ISO 13847:2000,
modified)
EN 1418-1997 焊接人员 设定完全机械化和自动化金属材料焊接的熔焊和阻焊的焊接操作者的批准测试
Welding personnel - Approval testing of welding
operators for fusion welding and resistance
weld setters for fully mechanized and automatic
welding of metallic materials
EN 1435-1997+A1-2002 焊接的无损检验 焊接接缝的X射线照相检验 Non-destructive
examination of welds - Radiographic examination
of welded joints
EN 1439-1996 液化石油气(LPG)用可运输可再充填的焊接钢瓶 充气前 充气时和充气后的检验程序
Transportable refillable welded steel cylinders
for liquefied petroleum gas (LPG) - Procedure
for checking before, during and after filling
EN 1440-1996+AC-1999 液化石油气(LPG)用可运输可再充填的焊接钢
周期重复鉴定 Transportable refillable welded steel
cylinders for liquefied petroleum gas (LPG)
- Periodic requalification / Note: To be replaced
by prEN 1440 (2003-09).
EN 1442-1998+A1-2002+AC-1999 液化石油气(LPG)用可运输可再充填焊接钢气瓶
设计和生产 Transportable refillable welded steel
cylinders for liquefied petroleum gas (LPG)
- Design and construction
EN 14612-2003 航天产品保证 自动机床波动焊接的核准和批准 Space product
assurance - Verification and approval of automatic
machine wave soldering
EN 1592-1-1997 铝和铝合金 HF接缝焊接管 第1部分：检验和交货技术条件
Aluminium and aluminium alloys - HF seam welded
tubes - Part 1: Technical conditions for inspection
and delivery
EN 1592-2-1997 铝和铝合金 HF接缝焊接管 第2部分：机械性能 Aluminium
and aluminium alloys - HF seam welded tubes
- Part 2: Mechanical properties
EN 1592-3-1997 铝和铝合金 HF接缝焊接管 第3部分：圆形管的尺寸和形状公差
Aluminium and aluminium alloys - HF seam welded
tubes - Part 3: Tolerances on dimensions and
form for circular tubes
EN 1592-4-1997 铝和铝合金 HF接缝焊接管 第4部分：方形、矩形和异形管的尺寸和形状公差
Aluminium and aluminium alloys - HF seam welded
tubes - Part 4: Tolerances on dimensions and
form for square, rectangular and shaped tubes
EN 1597-1-1997 焊料 试验方法 第1部分：镍和镍合金钢中完全焊接金属试验样品用试件
Welding consumables - Test methods - Part 1:
Test piece for all-weld metal test specimens
in steel, nickel and nickel alloys
EN 1597-2-1997 焊接耗材 试验方法 钢单焊和双焊技术试验样品试件的制备 Welding
consumables - Test methods - Part 2: Preparation
of test piece for single-run and two-run technique
test specimens in steel
EN 1597-3-1997 焊接耗材 试验方法 第3部分：角焊接中焊料定位能力的试验
Welding consumables - Test methods - Part 3:
Testing of positional capability of welding
consumables in a fillet weld
EN 1598-1997+A1-2001 焊接和类似加工的健康和安全 电弧焊工艺用透明焊接隔板、板条和屏蔽
Health and safety in welding and allied processes
- Transparent welding curtains, strips and screens
for arc welding processes
EN 1599-1997 焊接耗材 抗蠕变钢手工金属电弧焊接涂覆电极 分类 Welding
consumables - Covered electrodes for manual
metal arc welding of creep-resisting steels
- Classification
EN 1600-1997 焊接消耗品 不锈和耐热钢手工金属电弧焊接涂覆电极 分类 Welding
consumables - Covered electrodes for manual
metal arc welding of stainless and heat resisting
steels - Classification
EN 1668-1997 焊接耗材 非合金和细晶粒钢的惰性气体保护钨极焊用焊条 焊丝和熔敷
分类 Welding consumables - Rods, wires and deposits
for tungsten inert gas welding of non alloy
and fine grain steels - Classification
EN 169-2002 个人眼睛保护装置 在焊接及相关工艺中用的滤光器 透光度要求和推荐利用滤光器
Personal eye-protection - Filters for welding
and related techniques - Transmittance requirements
and recommended use
EN 1708-1-1999 焊接 钢件的焊接接头基础详细资料 第1部分：压力用途部件
Welding - Basic weld joint details in steel
- Part 1: Pressurized components
EN 1708-2-2000 焊接 钢件的焊接接头基础详细资料 第2部分：无内部压力用途部件
Welding - Basic weld joint details in steel
- Part 2: Non internal pressurized components
EN 1711-2000 焊接无损检验 通过综合平面分析对焊接的涡流检验 Non-destructive
examination of welds - Eddy current examination
of welds by complex plane analysis
EN 1712-1997 焊接无损检验 焊接接头超声波检测 验收水平 Non destructive
examination of welds - Ultrasonic examination
of welded joints - Acceptance levels
EN 1713-1998 焊接无损检验 超声波检验 焊接标记的特性表示 Non-destructive
examination of welds - Ultrasonic examination
- Characterization of indications in welds
EN 1714-1997 焊接无损检验 焊接接头超声检验 Non destructive
examination of welds - Ultrasonic examination
of welded joints
EN 1715-3-1997+AC-1998 铝和铝合金 拉制坯料 第3部分：机械应用的特殊要求(包括焊接)
Aluminium and aluminium alloys - Drawing stock
- Part 3: Specific requirements for mechanical
uses (excluding welding)
EN 1715-4-1997 铝和铝合金 拉制坯料 第4部分：焊接应用的特殊要求 Aluminium
and aluminium alloys - Drawing stock - Part
4: Specific requirements for welding applications
EN 1737-1998 高压多孔混凝土或开放结构轻集料混凝土预制件用钢筋板或框架焊接接头剪切强度的测定
Determination of shear strength of welded joints
of reinforcement mats or cages for prefabricated
components made of autoclaved aerated concrete
or lightweight aggregate concrete with open
structure
EN 175-1997 个人防护 焊接和类似加工中眼睛和面部的防护设备 Personal
protection - Equipment for eye and face protection
during welding and allied processes
EN 1778-1999 焊接热塑结构特性值 热塑设备设计的允许应力和模量的测定 Characteristic
values for welded thermoplastic constructions
- Determination of allowable stresses and moduli
for design of thermoplastic equipment
EN 1792-2003 焊接 焊接和相关工多语种术语表 Welding - Multilingual
list of terms for welding and related processes
EN 1803-2002 可运输气瓶 焊接碳钢周期检验和试验 Transportable
gas cylinders - Periodic inspection and testing
of welded carbon steel gas cylinders
EN 22553-1994 焊接、硬钎焊和软钎焊连头 图样上的符号表示法 Welded,
brazed and soldered joints - Symbolic representation
on drawings (ISO 2553:1992)
EN 2560-1998 航空航天系列 个人眼睛保护设备 有可变遮避物或双层遮避物的焊接滤光镜
Aerospace series - Carbon fibre preimpregnates
- Determination of the resin flow
EN 2574-1990 航空航天系列 焊接规范 制图资料 Aerospace series;
welds; information on drawings
EN 25817-1992 钢弧焊接头 缺点质量分级指南 Arc-welded joints
in steel; guidance on quality levels for imperfections
(ISO 5817:1992)
EN 2591-424-2001 航空航天系列 光电连接元件 试验方法 第424部分：无焊接缠绕连接
拆卸力 Aerospace series - Elements of electrical
and optical connection; Test methods - Part
424: Stripping force, solderless wrapped connections
EN 2591-425-2001 航空航天系列 光电连接元件 试验方法 第425部分：无焊接缠绕连接
展开能力 Aerospace series - Elements of electrical
and optical connection; Test methods - Part
425: Unwrapping capability, solderless wrapped
connections
EN 2656-2001 航空航天系列 连接管 焊接的连接端几何结构 Aerospace
series - Pipe coupling - Coupling end, welded,
Geometric configuration
EN 26848-1991 惰性气体保护电弧焊接以及等离子气体切割和焊接用的钨极 编码
Tungsten electrodes for inert gas shielded arc
welding and for plasma cutting and welding-
Codification (ISO 6848:1984)
EN 27286-1991 电阻焊接设备的图形符号 Graphical symbols
for resistance welding equipment (ISO 7286:1986)
EN 27963-1992 钢件的焊缝 2号超声波焊接探伤校准块 Welds in steel;
calibration block no. 2 for ultrasonic examination
of welds (ISO 7963:1985)
EN 288-1-1992+A1-1997 金属材料焊接程序规范和鉴定 第1部分：熔焊的通用规则
Specification and qualification of welding procedures
for metallic materials; part 1: general rules
for fusion welding
EN 288-2-1992+A1-1997 金属材料焊接程序规范和鉴定 第2部分：电弧焊焊接程序规范
Specification and approval of welding procedures
for metallic materials; part 2: welding procedure
specification for arc welding / Note: To be
replaced by prEN ISO 15609-1 (2003-10) (in preparation).
EN 288-3-1992+A1-1997 金属材料焊接程序规范和鉴定 第3部分：钢的电弧焊焊接程序试验
Specification and approval of welding procedures
for metallic materials; part 3: welding procedure
tests for the arc welding of steels
EN 288-4-1992+A1-1997 金属材料焊接程序规范和鉴定 第4部分：铝及其合金的电弧焊焊接程序试验
Specification and approval of welding procedures
for metallic materials; part 4: welding procedure
tests for the arc welding of aluminium and its
alloys
EN 288-5-1994 金属材料焊接程序规范和鉴定 第5部分：使用已被认可的焊接耗材对电弧焊的鉴定
Specification and approval of welding procedures
for metallic materials - Part 5: Approval by
using approved welding consumables for arc welding
EN 288-6-1994 金属材料焊接程序规范和鉴定 第6部分：有关以前经验的鉴定 Specification
and approval of welding procedures for metallic
materials - Part 6: Approval related to previous
experience
EN 288-7-1995 金属材料焊接程序规范和鉴定 第7部分：使用标准焊接程序的电弧焊的鉴定
Specification and approval of welding procedures
for metallic materials - Part 7: Approval by
a standard welding procedure for arc welding
EN 288-8-1995 金属材料焊接程序规范和鉴定 第8部分：用预焊接试验进行鉴定
Specification and approval of welding procedures
for metallic materials - Part 8: Approval by
a pre-production welding test
EN 288-9-1999 金属材料焊接程序规范和鉴定 第9部分：传输管道陆地和海上场所对接焊中管道焊接用焊接程序试验
Specification and approval of welding procedures
for metallic materials - Part 9: Welding procedure
test for pipeline welding on land and offshore
site butt welding of transmission pipelines
EN 30042-1994 铝和铝焊合金弧焊接头 缺陷质量分级指南 Arc-welded
joints in aluminium and its weldable alloys
- Guidance on quality levels for imperfections
(ISO 10042:1992)
EN 3081-2001 航空航天系列 钛合金管连接件8°30′修理用带动态梁密封端头的焊接箍圈
Aerospace series - Pipe coupling 8°30′in titanium
alloy - Ferrules, welded with dynamic beam seal
end, for repair
EN 3082-2001+AC-2003 航空航天系列 钛合金管连接件8°30′修理用焊接端的舱壁管接头
Aerospace series - Pipe coupling 8°30′in titanium
alloy - Unions, bulkhead welded end, for repair
EN 3083-2001+AC-2003 航空航天系列 钛合金管连接件8°30′修理用长焊接端舱壁管接头
Aerospace series - Pipe coupling 8?0 in titanium
alloy - Unions, bulkhead, long welded end, for
repair
EN 3084-2001+AC-2003 航空航天系列 钛合金管连接件8°30′修理用焊接端螺纹管接头
Aerospace series - Pipe coupling 8°30′in titanium
alloy - Unions, welded end threaded for repair
EN 3243-2001 航空航天系列 钛合金管连接件8°30′ 带动态梁密封端头的焊接箍
Aerospace series - Pipe coupling 8?30 in titanium
alloy - Ferrule, welded, with dynamic beam seal
end
EN 3247-2001 航空航天系列 钛合金管连接件8°30′舱壁焊接端管接头 Aerospace
series - Pipe coupling 8?30 in titanium alloy
- Unions, bulkhead welded end
EN 3272-2001 航空航天系列 钛合金管连接件8°30′带动态梁密封端头的焊接金属箍
几何结构 Aerospace series - Pipe coupling 8?30 -
Dynamic beam seal end for ferrule, welded; Geometric
configuration
EN 3561-2001+AC-2003 航空航天系列 钛合金管连接件8°30′具有动态梁密封端箍圈 焊接和轧制管端口
Aerospace series - Pipe coupling 8?0 in titanium
alloy - Ferrules with dynamic beam seal end,
welded and reduced at pipe end
EN 3688-2001+AC-2003 航空航天系列 钛合金焊接管用的T形环填缝金属 14000
kPa标准压强 Aerospace series - T-ring fillers in
titanium alloy for welding pipes - 14000 kPa
nominal pressure
EN 3689-2001+AC-2003 航空航天系列 钛合金焊接管用的T形环填缝金属 28000
kPa标准压强 Aerospace series - T-ring fillers in
titanium alloy for welding pipes - 28000 kPa
nominal pressure
EN 379-2003 人眼防护 自动焊接滤光片 Personal eye-protection
- Automatic welding filters
EN 3852-2002 航空航天系列 钛合金TI-P64001 球形60°管连接 焊接螺纹式直联管节
Aerospace series - Pipe couplings, 60? spherical,
in titanium alloy TI-P64001 - Straight unions,
welded, threaded
EN 3854-2002 航空航天系列 钛合金TI-P64001 球形60°管连接 焊接金属箍
Aerospace series - Pipe couplings, 60? spherical,
in titanium alloy TI-P64001 - Ferrules, welded
EN 3857-2002 航空航天系列 钛合金TI-P64001 球形60°管连接 焊接90°弯头
Aerospace series - Pipe couplings, 60? spherical,
in titanium alloy TI-P64001 - Elbows 90? welded
EN 3868-2003 航空航天系列 管连接 松套法兰和密封垫 TI-P64001钛合金焊接法兰连接器
Aerospace series - Pipe couplings, loose flanges
and seals - Flange connectors, welded, in titanium
alloy TI-P64001 / Note: To be replaced by prEN
3868 (2003-05).
EN 3882-2001 航空航天系列 耐热合金NI-WH1801(NiCr20Co18Ti3Al2) 焊接用填缝金属
Aerospace series - Heat resisting alloy NI-WH1801
(NiCr20Co18Ti3Al2) - Filler metal for welding
EN 3883-2001 航空航天系列 耐热合金 NI-WH2301(NiCr22Fe19Mo9Co2) 焊接用填缝金属
Aerospace series - Heat resisting alloy NI-WH2301
(NiCr22Fe19Mo9Co2) - Filler metal for welding
EN 3884-2001 航空航天系列 耐热合金 NI-WH2601(NiCr19Nb5Mo3Ti) 焊接用填缝金属
Aerospace series - Heat resisting alloy NI-WH2601
(NiCr19Nb5Mo3Ti) - Filler metal for welding
EN 3885-2001 航空航天系列 耐热合金 NI-WH3601(NiCr22Mo9Nb4) 焊接用填缝金属
Aerospace series - Heat resisting alloy NI-WH3601
(NiCr22Mo9Nb4) - Filler metal for welding
EN 3886-2001 航空航天系列 耐热合金 NI-WH1303(NiCo20Cr20Mo5Ti2AI) 焊接用填缝金属
Aerospace series - Heat resisting alloy NI-WH1303
(NiCo20Cr20Mo5Ti2AI) - Filler metal for welding
EN 3887-2001 航空航天系列 耐热合金 CO-WH4101(CoCr20W15Ni）
焊接用填缝金属 Aerospace series - Heat resisting
alloy CO-WH4101 (CoCr20W15Ni) - Filler metal
for welding
EN 3888-2001 航空航天系列 耐热合金 CO-WH1402(CoCr22Ni22W15)
焊接用填缝金属 Aerospace series - Heat resisting alloy
CO-WH1402 (CoCr22Ni22W15) - Filler metal for
welding
EN 3889-2001 航空航天系列 FE-WM3801 (X5CrNiCu17-4)钢
焊接用填缝金属 Aerospace series - Steel FE-WM3801
(X5CrNiCu17-4) - Filler metal for welding
EN 3890-2001 航空航天系列 FE-WM1502 (X11CrNiMoVN12-3)钢
焊接用填缝金属 Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3)
- Filler metal for welding
EN 3892-2001 航空航天系列 钛合金 TI-W64001 焊接用填缝金属 Aerospace
series - Titanium alloy TI-W64001 - Filler metal
for welding
EN 3893-2001 航空航天系列 钛合金 TI-W19001 焊接用填缝金属 Aerospace
series - Titanium alloy TI-W19001 - Filler metal
for welding
EN 3894-2001 航空航天系列 耐热合金 NI-WD3201(NiMo25Fe6Cr5）
焊接用填缝金属 Aerospace series - Heat resisting
alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal
for welding
EN 3895-2001 航空航天系列 耐热合金 NI-WH3901(NiCr16Mo15)
焊接用填缝金属 Aerospace series - Heat resisting alloy
NI-WH3901 (NiCr16Mo15) - Filler metal for welding
EN 3896-2001 航空航天系列 FE-WM1501 (X13CrNiMoCo12-3-2-2)钢
焊接用填缝金属 Aerospace series - Steel FE-WM1501
(X13CrNiMoCo12-3-2-2) - Filler metal for welding
EN 3897-2001 航空航天系列 FE-WA4801 (X6CrNiMnNb18-10)钢
焊接用填缝金属 Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10)
- Filler metal for welding
EN 4019-2001 航空航天系列 钛合金管连接 8°30′90°焊接端弯头 Aerospace
series - Pipe coupling 8?0 in titanium alloy
- Elbows 90°welded end
EN 4020-2001 航空航天系列 钛合金管连接 8°30′90°弯头 有推力丝螺母焊接端
Aerospace series - Pipe coupling 8?0 in titanium
alloy - Elbows 90° welded end with thrust wire
nut
EN 4022-2001 航空航天系列 钛合金管连接 8°30′ 舱壁焊接端90°弯头
Aerospace series - Pipe coupling 8?0 in titanium
alloy - Elbows 90°bulkhead, welded end
EN 4024-2001 航空航天系列 钛合金管连接 8°30′有丝推力螺母焊接端45°弯头
Aerospace series - Pipe coupling 8?0 in titanium
alloy - Elbows 45°welded end with thrust wire
nut
EN 4058-2001 航空航天系列 钛和钛合金用焊接填缝条和填缝丝 直径 0.5 mm≤D≤
5.0 mm 尺寸 Aerospace series - Filler rods and
filler wires for welding in titanium and titanium
alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions
EN 4059-2001 航空航天系列 钢焊接用填缝条和填缝丝 直径0,5 mm≤D≤5,0
mm 尺寸 Aerospace series - Filler rods and filler
wires for welding in steel - Diameter 0.5 mm
≤ D ≤ 5.0 mm - Dimensions
EN 4060-2001 航空航天系列 耐热合金焊接用填缝条和填缝丝 直径 0.5 mm
≤D≤5.0 mm 尺寸 Aerospace series - Filler rods
and filler wires for welding in heat resisting
alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm; Dimensions
EN 4183-2001 航空航天系列 钛合金管连接8°30′ 焊接端 ９０°弯头 Aerospace
series - Pipe coupling 8 Degree 30′in titanium
alloy - Elbows 90?welded ends
EN 4184-2001 航空航天系列 钛合金管连接8°30′ 焊接端 ４５°弯头 Aerospace
series - Pipe coupling 8?Degree 30′in titanium
alloy - Elbows 45? welded ends
EN 4188-2001 空航天系列 钛合金管连接8°30′ 焊接端舱壁９０度弯头 Aerospace
series - Pipe coupling 8 Degree 30′in titanium
alloy - Elbows 90?bulkhead, long, welded end
EN 4233-2001 航空航天系列 钛合金管连接 8°30′ 焊接螺纹管接头 Aerospace
series - Pipe coupling 8 Degree 30′in titanium
alloy - Unions, welded, threaded
EN 4324-2001 航空航天系列 铝合金AL-W42201 焊接用填缝金属杆 Aerospace
series - Aluminium alloy AL-W42201 - Filler
metal for welding; Rod
EN 4325-2001 航空航天系列 耐热合金 NI-WH1302(NiCr20Co13Mo4Ti3Al) 焊接用填缝金属丝和杆
Aerospace series - Heat resisting alloy NI-WH1302
(NiCr20Co13Mo4Ti3Al) - Filler metal for welding;
Wire and rod
EN 4326-2001 航空航天系列 耐热合金 CO-WH4102(CoCr28W20Ni5V1) 焊接用填缝金属丝和杆
Aerospace series - Heat resisting alloy CO-WH4102
(CoCr28W20Ni5V1) - Filler metal for welding;
Wire and rod
EN 4327-2001 航空航天系列 耐热合金CO-WH1401(CoCr26Ni11W8) 焊接用填缝金属丝和杆
Aerospace series - Heat resisting alloy CO-WH1401
(CoCr26Ni11W8) - Filler metal for welding; Wire
and rod
EN 4328-2002 航空航天系列 钢 FE-WM1601 (X18CrWNi13-3-2) 焊接用填缝金属丝和杆
Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2)
- Filler metal for welding; Wire and rod
EN 4329-2001 航空航天系列 耐热合金NI-WH0001(NiCr20) 焊接用填缝金属丝和杆
Aerospace series - Heat resisting alloy NI-WH0001
(NiCr20) - Filler metal for welding; Wire and
rod
EN 4330-2002 航空航天系列 钢 FE-WA4802 (X8CrNiMn27-22-2) 焊接用填缝金属丝和杆
Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2)
- Filler metal for welding; Wire and rod
EN 4331-2002 航空航天系列 钢 FE-WL1804 (25CrMnMo4-2-2) 焊接用填缝金属丝和杆
Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2)
- Filler metal for welding; Wire and rod
EN 4332-2002 航空航天系列 钢 FE-WL1805 (8CrMnMo12-4-9) 焊接用填缝金属丝和杆
Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9)
- Filler metal for welding; Wire and rod
EN 4333-2002 航空航天系列 钢 FE-WL1805 (X5CrNiCoMoWMn21-20-20-3-3-2) 焊接用填缝金属丝和杆
Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2)
- Filler metal for welding; Wire and rod
EN 4334-2002 航空航天系列 钢 FE-WL1806 (15CrMnMoV5-4-9-3) 焊接用填缝金属丝和杆
Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3)
- Filler metal for welding; Wire and rod
EN 4335-2002 航空航天系列 钢 FE-WA2602 (X4NiCrTiMoV26-15) 焊接用填缝金属丝和杆
Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15)
- Filler metal for welding; Wire and rod
EN 4336-2002 航空航天系列 钢 FE-WA3801 (X4CrNiMn20-10-2) 焊接用填缝金、丝和杆
Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2)
- Filler metal for welding; Wire and rod
EN 4337-2001 航空航天系列 耐热合金 NI-WH8901(NiCr16Ti3Mn2) 焊接用填缝金属丝和杆
Aerospace series - Heat resisting alloy NI-WH8901
(NiCr16Ti3Mn2) - Filler metal for welding; Wire
and rod
EN 4338-2001 航空航天系列 耐热合金NI-WH3902(NiCr25Mo10C) 焊接用填缝金属丝和杆
Aerospace series - Heat resisting alloy NI-WH3902
(NiCr25Mo10C) - Filler metal for welding; Wire
and rod
EN 4339-2001 航空航天系列 耐热合金 CO-WH4001(CoCr29W9) 焊接用填缝金属丝和杆
Aerospace series - Heat resisting alloy CO-WH4001
(CoCr29W9) - Filler metal for welding; Wire
and rod
EN 4340-2002 航空航天系列 镁合金 MG-W68001 焊接用填缝金属丝和杆
Aerospace series - Magnesium alloy MG-W68001
- Filler metal for welding; Wire and rod
EN 4341-2001 航空航天系列 铝合金 AL-W46431 焊接用填缝金属丝和杆
Aerospace series - Aluminium alloy AL-W46431
- Filler metal for welding; Wire and rod
EN 4342-2001 航空航天系列 钛TI-W99001 焊接用填缝金属丝和杆 Aerospace
series - Titanium TI-W99001 - Filler metal for
welding - Wire and rod
EN 4343-2002 航空航天系列 钢 FE-WM1001(X13Cr12) 焊接填缝金属丝和杆
Aerospace series - Steel FE-WM1001 (X13Cr12)
- Filler metal for welding; Wire and rod
EN 4344-2001 航空航天系列 钢 FE-WM1002 (X13Cr13)焊接用填缝金属丝和杆
Aerospace series - Steel FE-WM1002 (X13Cr13)
- Filler metal for welding; Wire and rod
EN 439-1994 焊接消耗品 电弧焊和切割用保护气体 Welding consumables
- Shielding gases for arc welding and cutting
EN 440-1994 焊接消耗品 非合金与细粒钢的气体保护金属电弧焊用丝状电极和沉积物
分类 Welding consumables - Wire electrodes and
deposits for gas shielded metal arc welding
of non alloy and fine grain steels - Classification
EN 4549-2003 航空航天系列 耐热钢或耐热镍基合金联管节 焊接端头 设计结构 英制系列
Aerospace series - Pipe coupling, in heat resisting
steel or in heat resisting nickel alloy - Coupling
end, welded; Design configuration; Inch series
EN 4552-2003 航空航天系列 耐热钢37度球形联管节 焊接直接头 英制系列 Aerospace
series - Pipe coupling 37? spherical, in heat
resisting steel - Straight nipples, welded end;
Inch series
EN 4553-2003 航空航天系列 耐热钢37度球形联管节 焊接90度弯接头 英制系列
Aerospace series - Pipe coupling 37? spherical,
in heat resisting steel - Elbow 90?nipples,
welded end; Inch series
EN 4555-2003 航空航天系列 耐热钢37度联管节 焊接箍 英制系列 Aerospace
series - Pipe coupling 37? in heat resisting
steel - Ferrules, welded end; Inch series
EN 4561-2003 航空航天系列 耐热钢焊接联管节 90度弯管 英制系列 Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Elbow 90? Inch series
EN 4562-2003 航空航天系列 耐热钢焊接联管节 变径管 英制系列 Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Reductors; Inch series
EN 4563-2003 航空航天系列 耐热钢焊接联管节 T形接头 英制系列 Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Tees; Inch series
EN 470-1-1995+A1-1998 焊接和类似操作用防护服 第1部分：一般要求
Protective clothing for use in welding and allied
processes - Part 1: General requirements
EN 499-1994 焊接消耗品 非合金与细粒钢的手工金属电弧焊用包剂焊条 分类 Welding
consumables - Covered electrodes for manual
metal arc welding of non alloy and fine grain
steels - Classification
EN 50069-1991+A1-1993 充气高压开关设备和控制设备用铸铝合金和锻铝合金焊接的混合材料
外壳规范 Welded composite enclosures of cast and
wrought aluminium alloys for gas-filled high-voltage
switchgear and controlgear
EN 514-2000 门窗建造用未增塑聚氯乙烯型材 焊接弯头和T型接头强度的测定 Unplasticized
polyvinylchloride (PVC-U) profiles for the fabrication
of windows and doors - Determination of the
strength of welded corners and T joints
EN 531-1995+A1-1998 热环境中工人的防护服(不包括消防服和焊接服) Protective
clothing for industrial workers exposed to heat
(excluding firefighters and welders clothing)
EN 559-2003 气焊设备 焊接、切割和同类处理用橡胶软管 Gas welding
equipment - Rubber hoses for welding, cutting
and allied processes
EN 560-1994 气焊设备 焊接、切割和同类处理用设备的软管连接 Gas welding
equipment - Hose connections for equipment for
welding, cutting and allied processes
EN 561-2002 气焊设备 焊接、切割和同类处理用断路阀门快速连接器 Gas welding
equipment - Quick-action coupling with shut-off
valves for welding, cutting and allied processes
EN 562-2003 气焊设备 焊接、切割和同类处理用压力计 Gas welding
equipment - Pressure gauges used in welding,
cutting and allied processes
EN 60068-2-58-1999 环境试验 第2-58部分：试验 试验Td：表面安装元器件用可焊性、耐金属化溶融和耐焊接热试验方法
Environmental testing - Part 2-58: Tests - Test
Td: Test methods for solderability, resistance
to dissolution of metallization and to soldering
heat of surface mounting devices (SMD) (IEC
60068-2-58:1999)
EN 60512-12-6-1996 电子设备用机电元件 基本试验规程和测量方法 第12部分：可钎焊性试验方法第6节：试验12f：机械钎焊焊接过
Electromechanical components for electronic
equipment - Basic testing procedures and measuring
methods - Part 12: Soldering tests - Section
6: Test 12f: Sealing against flux and cleaning
solvents in machine soldering (IEC 60512-12-6:1996)
EN 60512-12-7-2001 电子设备用连接器 试验和测量 第12-7:可焊接试验 试验12g
可焊性别 湿平衡法 Connectors for electronic equipment
- Tests and measurements - Part 12-7: Soldering
tests; Test 12g: Solderability, wetting balance
method (IEC 60512-12-7:2001)
EN 60512-16-20-1996 电子设备用机电元件 基本试验规程和测量方法 第16部分：触点和终端机械试验 第20节：试验１６t 机械强
Electromechanical components for electronic
equipment - Basic testing procedures and measuring
methods - Part 16: Mechanical tests on contacts
and terminations - Section 20: Test 16t: Mechanical
strength (wired termination of solderless connections)
(IEC
EN 60534-3-3-1998 工业过程控制阀 第三部分：尺寸 对接焊接 两向 球型 垂直模式控制阀的末端对末端尺寸
Industrial-process control valves - Part 3-3:
Dimensions - End-to-end dimensions for buttweld,
two-way, globe-type, straight pattern control
valves (IEC 60534-3-3:1998)
EN 60749-15-2003 半导体器件 机械和气候试验方法 第15部分：透孔安装设备对焊接温度的阻抗
Semiconductor devices - Mechanical and climatic
test methods - Part 15: Resistance to soldering
temperature for through-hole mounted devices
(IEC 60749-15:2003) / Note: Endorsement notice
EN 60974-1-1998+A1-2000+A2-2003 电弧焊设备 第１部分：焊接电源
Arc welding equipment - Part 1: Welding power
sources (IEC 60974-1:1998)
EN 60974-12-1995 弧焊设备 第12部分：焊接电缆的连接器 Arcwelding
equipment - Part 12: Coupling devices for welding
cables (IEC 60974-12:1992, modified)
EN 61076-4-107-2001 电子设备用连接器 第4-107部分：有质量评定的印制板连接器 印制电路板用基本网格为2.0
mm、固定部分带有 Connectors for electronic equipment-part
4-107:Printed board connectors with assessed
quality; Detail specification for shielded two-part
connectors having a basic grid of 2, 0 mm, fixed
part with solder and press-in terminations for
printed boards
EN 61188-5-1-2002 印制电路板和印制电路板组件 设计和使用 第5-1部分：附着(焊接/接合)的考虑 通用要求
Printed boards and printed board assemblies
- Design and use - Part 5-1: Attachment (land/joint)
considerations; Generic requirements (IEC 61188-5-1:2002)
/ Note: Endorsement notice
EN 61188-5-2-2003 印制电路板和印制电路板组件 设计和使用 第5-2部分：附着(焊接/接合)的考虑 分立元件
Printed boards and printed board assemblies
- Design and use - Part 5-2: Attachment (land/joint)
considerations; Discrete components (IEC 61188-5-2:2003)
/ Note: Endorsement notice
EN 61188-5-6-2003 印制电路板和印制电路板组件 设计和使用 第5-6部分：附着(焊接/接合)的考虑 四边带有J导线的晶片载体
Printed boards and printed board assemblies
- Design and use - Part 5-6: Attachment (land/joint)
considerations; Chip carriers with J-leads on
four sides (IEC 61188-5-6:2003) / Note: Endorsement
notice
EN 61191-1-1998 印刷电路板组件 第1部分：总规范 使用表面安装和相关装配技术的焊接电气和电子组件的要求
Printed board assemblies - Part 1: Generic specification:
Requirements for soldered electrical and electronic
assemblies using surface mount and related assembly
technologies (IEC 61191-1:1998)
EN 61191-2-1998 印刷电路板组件 第2部分：分规范 表面安装焊接组件的要求
Printed board assemblies - Part 2: Sectional
specification: Requirements for surface mount
soldered assemblies (IEC 61191-2:1998)
EN 61191-3-1998 印刷电路板组件 第3部分：分规范 通孔安装焊接组件的要求
Printed board assemblies - Part 3: Sectional
specification: Requirements for through-hole
mount soldered assemblies (IEC 61191-3:1998)
EN 61191-4-1998 印刷电路板组件 第4部分：分规范 端点焊接组件的要求 Printed
board assemblies - Part 4: Sectional specification:
Requirements for terminal soldered assemblies
(IEC 61191-4:1998)
EN 719-1994 焊接配合 任务和责任 Welding coordination
- Tasks and responsibilities
EN 729-1-1994 焊接质量要求 金属材料熔焊 第1部分：选择和使用指南 Quality
requirements for welding - Fusion welding of
metallic materials - Part 1: Guidelines for
selection and use
EN 729-2-1994 焊接质量要求 金属材料熔焊 第2部分：综合质量要求 Quality
requirements for welding - Fusion welding of
metallic materials - Part 2: Comprehensive quality
requirements
EN 729-3-1994 焊接质量要求 金属材料熔焊 第3部分：标准质量要求 Quality
requirements for welding - Fusion welding of
metallic materials - Part 3: Standard quality
requirements
EN 729-4-1994 焊接质量要求 金属材料熔焊 第4部分：基本质量要求 Quality
requirements for welding - Fusion welding of
metallic materials - Part 4: Elementary quality
requirements
EN 756-1995 焊接消耗品 非合金和细精粒钢埋弧焊用电焊条和电焊剂混合物 分类
Welding consumables - Wire electrodes and wire-flux
combinations for submerged arc welding of non
alloy and fine grain steels - Classification
EN 757-1997 焊接消耗品 高强度钢手工金属弧焊用涂层焊条 分类 Welding
consumables - Covered electrodes for manual
metal arc welding of high strength steels -
Classification
EN 758-1997 焊接消耗品 带和不带气体保护壳的非合金钢及细粒钢金属电弧焊接用管状芯焊条
分类 Welding consumables - Tubular cored electrodes
for metal arc welding with and without a gas
shield of non alloy and fine grain steels -
Classification
EN 759-1997 焊接消耗品 焊接填充金属的交货技术条件 产品型号、尺寸、公差和标志
Welding consumables - Technical delivery conditions
for welding filler metals - Type of product,
dimensions, tolerances and marking
EN 760-1996 焊接消耗品 埋弧焊用焊剂 分类 Welding consumables
- Fluxes for submerged arc welding - Classification
EN 804-1994 塑料管道系统 压力管道溶焊接头的喷射铸造插接部件 瞬时内部液压阻力的试验方法
Plastics piping systems - Injection-moulded
socket fittings for solvent-cemented joints
for pressure piping - Test method for resistance
to a short-term internal hydrostatic pressure
EN 846-3-2000 砖石结构辅助部件试验方法 第3部分：预制底层接缝加固焊接剪切负荷量的测定
Methods of test for ancillary components for
masonry - Part 3: Determination of shear load
capacity of welds in prefabricated bed joint
reinforcement
EN 874-1995 气焊设备 圆柱筒焊接用氧/燃料气体焊炬（切割机型） 结构型式、一般规范和试验方法
Gas welding equipment - Oxygen/fuel gas blowpipes
(cutting machine type) of cylindrical barrel
- Type of construction, general specifications,
test methods
EN 875-1995 金属材料焊接的破坏试验 冲击试验 试样定位、槽口取向和检验 Destructive
tests on welds in metallic materials - Impact
tests - Test specimen location, notch orientation
and examination
EN 876-1995 金属材料焊接的破坏试验 熔焊接头中焊接金属的纵向拉伸试验 Destructive
tests on welds in metallic materials - Longitudinal
tensile test on weld metal in fusion welded
joints
EN 895-1995 金属材料焊接的破坏试验 横向抗拉试验 Destructive tests
on welds in metallic materials - Transverse
tensile test
EN 910-1996 金属材料焊接的破坏试验 弯曲试验 Destructive tests
on welds in metallic materials - Bend tests
EN ISO 1071-2003 焊接消耗品 铸铁熔焊用药剂焊极、焊丝、焊条和管关芯焊极 分类
Welding consumables - Covered electrodes, wires,
rods and tubular cored electrodes for fusion
welding of cast iron - Classification (ISO 1071:2003)
EN ISO 10882-1-2001 焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第1部分：空气中粒子取样
Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operators breathing zone - Part 1: Sampling
of airborne particles (ISO 10882-1:2001)
EN ISO 10882-2-2000 焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第2部分：气体取样
Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operatiors breathing zone - Part 2: Sampling
of gases (ISO 10882-2:2000)
EN ISO 13916-1996 焊接 预热温度、道间温度和预热维持温度测量的指南 Welding
- Guidance for the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature (ISO 13916:1996)
EN ISO 13918-1998 焊接 电弧螺栓焊用螺栓和陶瓷箍套 Welding -
Studs and ceramic ferrules for arc stud welding
(ISO 13918:1998)
EN ISO 13919-1-1996 焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分：钢
Welding - Electrons and laser-beam welded joints
- Guidance on quality levels for imperfections
- Part 1: Steel (ISO 13919-1:1996)
EN ISO 13919-2-2001 焊接 电子束和激光焊接头 缺陷的质量分级指南 第2部分：铝及其可焊合金
Welding - Electron and laser beam welded joints
- Guidance on quality levels for imperfections
- Part 2: Aluminium and its weldable alloys
(ISO 13919-2:2001)
EN ISO 13920-1996 焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置
Welding - General tolerances for welded constructions
- Dimensions for lengths and angles - Shape
and position (ISO 13920:1996)
EN ISO 14114-1999 气焊设备 焊接、切割及相关工艺用的乙炔汇流系统 一般要求
Gas welding equipment - Acetylene manifold systems
for welding, cutting and allied processes -
General requirements (ISO 14114:1999)
EN ISO 14329-2003 电阻焊接 焊缝的破环性检验 电阻点焊、缝焊和凸焊焊缝的疲劳类型和几何量测量
Resistance welding - Destructive test of welds
- Failure types and geometric measurements for
resistance spot, seam and projection welds (ISO
14329:2003)
EN ISO 14372-2001 焊接耗材 通过测量扩散氢方法测定手工电弧焊 焊条的抗湿性
Welding consumables - Determination of moisture
resistance of manual metal arc welding electrodes
by measurement of diffusible hydrogen (ISO 14372:2000)
EN ISO 14554-1-2000 焊接质量要求 金属材料的电阻焊接 第1部分：完整质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Part 1: Comprehensive
quality requirements (ISO 14554-1:2000)
EN ISO 14554-2-2000 焊接质量要求 金属材料的电阻焊接 第2部分：基本质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Part 2: Elementary
quality requirements (ISO 14554-2:2000)
EN ISO 14555-1998 焊接 金属材料的电弧螺栓焊 Welding - Arc
stud welding of metallic materials (ISO 14555:1998)
EN ISO 14744-1-2000 焊接 电子束焊接机的验收检验 第1部分：原理和验收条件
Welding - Acceptance inspection of electron
beam welding machines - Part 1: Principles and
acceptance conditions (ISO 14744-1:2000)
EN ISO 14744-2-2000 焊接 电子束焊接机的验收检验 第2部分：加速电压特性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 2: Measurement
of accelerating voltage characteristics (ISO
14744-2:2000)
EN ISO 14744-3-2000 焊接 电子束焊接机的验收检验 第3部分：电子束电流特性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 3: Measurement
of beam current characteristics (ISO 14744-3:2000)
EN ISO 14744-4-2000 焊接 电子束焊接机的验收检验 第4部分：焊接速度的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 4: Measurement
of welding speed (ISO 14744-4:2000)
EN ISO 14744-5-2000 焊接 电子束焊接机的验收检验 第5部分：偏转精度的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 5: Measurement
of run-out accuracy (ISO 14744-5:2000)
EN ISO 14744-6-2000 焊接 电子束焊接机的验收检验 第6部分：焊点位置稳定性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 6: Measurement
of stability of spot position (ISO 14744-6:2000)
EN ISO 15011-1-2002 焊接和有关工艺中的卫生和安全 电弧焊产生的烟尘和气体取样的实验室方法 第1部分：颗粒烟尘分析取样和产
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
generated by arc welding - Part 1: Determination
of emission rate and sampling for analysis of
particulate fume (ISO 15011-1:2002)
EN ISO 15011-2-2003 焊接和有关工艺中的健康和安全 电弧焊产生的烟尘和气体取样的实验室方法 第2部分：除臭氧外、各种气体产
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
generated by arc welding - Part 2: Determination
of emission rates of gases, except ozone (ISO
15011-2:2003)
EN ISO 15011-3-2002 焊接和有关工艺中的健康和安全 电弧焊产生的烟尘和气体取样的实验室方法 第3部分：在固定点测定臭氧浓度
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
generated by arc welding - Part 3: Determination
of ozone concentration using fixed point measurements
(ISO 15011-3:2002)
EN ISO 15609-2-2001 金属焊接工艺的规范和验收 焊接工艺规范 第2部分：气焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 2: Gas welding (ISO 15609-2:2001)
EN ISO 15614-11-2002 金属焊接工艺的规范和验收 焊接工艺试验 第11部分：电子和激光束焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 11: Electron and laser beam welding (ISO
15614-11:2002)
EN ISO 15614-8-2002 金属焊接工艺的规范和验收 焊接工艺试验 第8部分：管对管板接头焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 8: Welding of tubes to tube-plate joints
(ISO 15614-8:2002)
EN ISO 15615-2002 气焊设备 焊接、切割及相关工艺用多种乙炔发生器 高压装置中的安全要求
Gas welding equipment - Acetylene manifold systems
for welding, cutting and allied processes -
Safety requirements in high-pressure devices
(ISO 15615:2002)
EN ISO 15616-1-2003 高质量焊接及切割用二氧化碳激光束机的验收试验 第1部分：一般原则、验收条件
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 1: General principles, acceptance conditions
(ISO 15616-1:2003)
EN ISO 15616-2-2003 高质量焊接及切割用二氧化碳激光束机的验收试验 第2部分：静止及动态精度的测量
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 2: Measurement of static and dynamic
accuracy (ISO 15616-2:2003)
EN ISO 15616-3-2003 高质量焊接及切割用二氧化碳激光束机的验收试验 第3部分：气流量及气压测量仪的校正
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 3: Calibration of instruments for measurement
of gas flow and pressure (ISO 15616-3:2003)
EN ISO 15618-1-2001 水下焊接的焊工资格认可试验 第1部分：超高压湿焊的潜水焊工
Qualification testing of welders for under-water
welding - Part 1: Diver-welders for hyperbaric
wet welding (ISO 15618-1:2001)
EN ISO 15618-2-2001 水下焊接的焊工资格认可试验 第2部分：超高压干焊的潜水员焊工和焊接操作员
Approval testing of welders for under-water
welding - Part 2: Diver-welders and welding
operators for hyperbaric dry welding (ISO 15618-2:2001)
EN ISO 15620-2000 焊接 金属材料的摩擦焊接 Welding - Friction
welding of metallic materials (ISO 15620:2000)
EN ISO 15630-2-2002 钢筋混凝土和预应力混凝土用钢筋 试验方法 第2部分：焊接钢筋网
Steel for the reinforcement and prestressing
of concrete - Test methods - Part 2: Welded
fabric (ISO 15630-2:2002)
EN ISO 17652-1-2003 焊接 焊接和相关工艺车间底火的试验 第1部分：一般要求
Welding - Test for shop primers in relation
to welding and allied processes - Part 1: General
requirements (ISO 17652-1:2003)
EN ISO 17652-2-2003 焊接 焊接和相关工艺车间底火的试验 第2部分：车间底火的焊接特性
Welding - Test for shop primers in relation
to welding and allied processes - Part 2: Welding
properties of shop primers (ISO 17652-2:2003)
EN ISO 17652-3-2003 焊接 焊接和相关工艺车间底火的试验 第3部分：热切割
Welding - Test for shop primers in relation
to welding and allied processes - Part 3: Thermal
cutting (ISO 17652-3:2003)
EN ISO 17652-4-2003 焊接 焊接和相关工艺车间底火的试验 第4部分：焰气排放
Welding - Test for shop primers in relation
to welding and allied processes - Part 4: Emission
of fumes and gases (ISO 17652-4:2003)
EN ISO 21670-2003 带凸缘的六角焊接螺母 Hexagon weld nuts
with flange (ISO 21670:2003)
EN ISO 2503-1998+AC-1998 气焊设备 焊接、切割及相关工艺用300bar以下的气瓶调压器
Gas welding equipment - Pressure regulators
for gas cylinders used in welding, cutting and
allied processes up to 300 bar (ISO 2503:1998)
EN ISO 3677-1995 软钎焊 硬钎焊和钎接焊接用填充金属 符号规定 Filler
metal for soft soldering, brazing and braze
welding - Designation (ISO 3677:1992)
EN ISO 3690-2000 焊接与相关工艺 在铁素体电弧焊金属中氢含量的测定 Welding
and allied processes - Determination of hydrogen
content in ferritic arc weld metal (ISO 3690:2000)
EN ISO 4063-2000 焊接和相关工艺 工艺名称和参照代码 Welding and
allied processes - Nomenclature of processes
and reference numbers (ISO 4063:1998)
EN ISO 5172-1996 焊接、切割及加热用手工焊炬规范和试验 Manual blowpipes
for welding, cutting and heating - Specifications
and tests (ISO 5172:1995, including Amendment
1:1995)
EN ISO 6520-1-1998 焊接和相关工艺 金属材料中几何缺陷的分类 第1部分：熔焊
Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Part 1: Fusion welding (ISO 6520-1:1998)
EN ISO 6520-2-2001 焊接和相关工艺 金属材料中几何缺陷的分类 第2部分：压力焊接
Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Part 2: Welding with pressure (ISO 6520-2:2001)
EN ISO 6847-2001 焊接耗材 化学分析用焊接金属的熔敷 Welding consumables
- Deposition of a weld metal pad for chemical
analysis (ISO 6847:2000)
EN ISO 6947-1997 焊接 工作位置 倾角与转角的定义 Welds - Working
positions - Definitions of angles of slope and
rotation (ISO 6947:1993)
EN ISO 7291-2001 气焊设备 用于300bar以下的焊接、切割及相关工艺用汇流系统上的压力调节器
Gas welding equipment - Pressure regulators
for manifold systems used in welding, cutting
and allied processes up to 300 bar (ISO 7291:1999)
EN ISO 8166-2003 电阻焊接 用固定机械设备评定点焊焊条寿命的程序 Resistance
welding - Procedure for the evaluation of the
life of spot welding electrodes using constant
machines settings (ISO 8166:2003)
EN ISO 8205-1-2002 电阻焊接水冷次级线圈连接电缆 第1部分：双导体连接电缆的尺寸和要求
Water-cooled secondary connection cables for
resistance welding - Part 1: Dimensions and
requirements for double-conductor connection
cables (ISO 8205-1:2002)
EN ISO 8205-2-2002 电阻焊接水冷次级线圈连接电缆 第2部分：单根导线连接电缆的尺寸和要求
Water-cooled secondary connection cables for
resistance welding - Part 2: Dimensions and
requirements for single-conductor connection
cables (ISO 8205-2:2002)
EN ISO 8205-3-1996 电阻焊接水冷次级线圈连接电缆 第3部分：试验要求
Water-cooled secondary connection cables for
resistance welding - Part 3: Test requirements
(ISO 8205-3:1993)
EN ISO 8249-2000 焊接 奥氏体和成双铁素体奥氏体镍－铬不锈钢焊接金属中铁素体数(FN)的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals (ISO 8249:2000)
EN ISO 8434-4-2000 用于流体传动和一般用途的金属管接头 第4部分：带O形圈焊接接头体的24度锥形管接头
Metallic tube connections for fluid power and
general use - Part 4: 24?degrees cone connectors
with O-ring weld-on nipples (ISO 8434-4:1995)
EN ISO 9692-2-1998 焊接和相关工艺 接头的制备 第2部分：钢的埋弧焊
Welding and allied processes - Joint preparation
- Part 2: Submerged arc welding of steels (ISO
9692-2:1998)
EN ISO 9692-3-2001 焊接和相关工艺 接头制备的建议 第3部分：铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊
Welding and allied processes - Recommendations
for joint preparation - Part 3: Metal inert
gas welding and tungsten inert gas welding of
aluminium and its alloys (ISO 9692-3:2000)
EN ISO 9692-4-2003 焊接和相关工艺 接头制备的建议 第4部分：复合钢
Welding and allied processes - Recommendations
for joint preparation - Part 4: Clad steels
(ISO 9692-4:2003)
EN ISO 9956-10-1996 金属材料焊接工艺规程及认可 第10部分：电子束焊接工艺规程
Specification and approval of welding procedures
for metallic materials - Part 10: Welding procedure
specification for electron beam welding (ISO
9956-10:1996)
EN ISO 9956-11-1996 金属材料焊接工艺规程及认可 第11部分：激光束焊接工艺规程
Specification and approval of welding procedures
for metallic materials - Part 11: Welding procedure
specification for laser beam welding (ISO 9956-11:1996)
ENV 10080-1995 混凝土加固用钢材 为适于焊接而加筋的混凝土钢B500 棒、
环盘 已焊过的钢筋网的交货技术条件 Steel for the reinforcement
of concrete - Weldable ribbed reinforcing steel
B 500 - Technical delivery conditions for bars,
coils and welded fabric / Note: Withdrawn by
mistake
ENV 50184-1996 电弧焊接设备的确认 Validation of arc welding
equipment (BS 7570:1992)
prEN 10025-3-2000 热轧结构钢制品 第3部分：正火/正火轧制可焊接细晶结构钢的交货技术条件
Hot rolled products of structural steels - Part
3: Technical delivery conditions for normalized/normalized
rolled weldable fine grain structural steels
prEN 10080-5-1999 钢筋混凝土用钢材 可焊钢筋 第5部分：焊接钢筋网交货技术条件
Steel for the reinforcement of concrete - Weldable
reinforcing steel - Part 5: Technical delivery
conditions for welded fabric
prEN 1011-7-2002 焊接 金属材料焊接的推荐规范 第7部分：电子束焊接 Welding
- Recommendations for welding of metallic materials
- Part 7: Electron beam welding
prEN 1011-8-2002 焊接 金属材料焊接的推荐规范 第8部分：铸铁焊接 Welding
- Recommendations for welding of metallic materials
- Part 8: Welding of cast irons
prEN 10217-7-1998 压力用途的焊接钢管 交货技术条件 第7部分：不锈钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 7: Stainless steel
tubes
prEN 10255-2002 适用于焊接和加工螺纹的非合金钢管 交货技术条件 Non-alloy
steel tubes suitable for welding or threading
- Technical delivery conditions
prEN 10296-2-2001 机械和一般工程用途的焊接钢管 交货技术条件 第2部分：不锈钢管
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Part 2: Stainless steel tubes
prEN 10305-6-1999 高精密度用途的钢管 交货技术条件 第6部分：液压和气动系统用冷拔焊接钢管
Steel tubes for precision applications - Technical
delivery conditions - Part 6: Welded cold drawn
tubes for hydraulic and pneumatic power systems
prEN 1157-1993 焊接 工作位置 倾斜角和旋转角定义 Welds; working
positions; definitions of angles of slope and
rotation
prEN 13100-2-2002 热塑性塑料半成品焊接接头的无损检验 第2部分：X射线检查法
Non destructive testing of welded joints of
thermoplastics semi-finished products - Part
2: X-ray radiographic testing
prEN 13100-3-2002 热塑性塑料半成品焊接接头的无损检验 第3部分：超声检测
Non destructive testing of welded joints of
thermoplastics semi-finished products - Part
3: Ultrasonic testing
prEN 13479-2002 焊接耗材 耗材合格评定试验方法和质量要求 第1部分：主要方法和评价
Welding consumables - General product standard
for filler metals and fluxes for fusion welding
of metallic materials
prEN 13705-1999 热塑性塑料的焊接 热气流焊的机器和设备（包括挤压焊） Welding
of thermoplastics - Machines and equipment for
hot gas welding (including extrusion welding)
prEN 14015-1-2000 在环境温度和高于环境温度 用于储存液体 现场建造的 垂直圆柱形平底 地面焊接金属罐的设计和制造规范
Specification for the design and manufacture
of site built, vertical, cylindrical, flat-bottomed,
above ground, welded, metallic tanks for the
storage of liquids at ambient temperature and
above - Part 1: Steel tanks
prEN 14208-2003 可运输气瓶 气体运输用容积达3000升的焊接气罐规范 设计和结构
Transportable gas cylinders - Specification
for welded pressure drums up to 1000 litre capacity
for the transport of gases - Design and construction
prEN 14295-2003 焊接消耗品 高强度钢埋弧焊丝和管状药芯焊条与焊条、焊剂组件
分类 Welding consumables - Wire and tubular cored
electrodes and electrode-flux combinations for
submerged arc welding of high strength steels
- Classification
prEN 14448-2002 大规模生产中热塑性模塑料的热工具焊接 Heated tool
welding of thermoplastics mouldings in mass
production
prEN 2169-1981 航空航天系列 溶溶处理的耐热钢FE-PA91-HT 焊接环用棒材和型材
Heat resisting steel FE-PA91-HT, solution treated;
bars and sections for welded rings; aerospace
series
prEN 2237-1981 航空航天系列 经溶液处理和淀积处理的耐热钢 FE-PA91-HT
焊接环用棒材和型材 Heat resisting steel FE-PA91-HT, solution
treated and precipitation treated; bars and
sections for welded rings; aerospace series
prEN 288-10-1994 金属材料焊接程序规范和鉴定 第10部分：电子束焊的焊接程序规范
Specification and approval of welding procedures
for metallic materials - Part 10: Welding procedure
specification for electron beam welding
prEN 288-11-1994 金属材料焊接程序规范和鉴定 第11部分：激光束焊的焊接程序规范
Specification and approval of welding procedures
for metallic materials - Part 11: Welding procedure
specification for laser beam welding
prEN 288-12-1995 金属材料焊接程序规范和鉴定 第12部分：铸钢弧焊的焊接程序试验（ISO
9956-2:1995） Specification and approval of welding
procedures for metallic materials - Part 12:
Welding procedure tests for the arc welding
of cast steels (ISO 9956-2:1995)
prEN 288-13-1995 金属材料焊接程序规范和鉴定 第13部分：铝和铸锻材料化合物弧焊的焊接程序试验
Specification and approval of welding procedures
for metallic materials - Part 13: Welding procedure
tests for the arc welding of aluminium and combinations
of cast to wrought material (ISO 9956-3:1995)
prEN 3155-012-2000 航空航天系列 用在连接部件的电接点 第012部分：三轴的8号、D型焊接R级插塞电接点 产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 012: Contacts,
electrical, triaxial, size 8, male, type D,
solder, class R; product standard
prEN 3155-013-2000 航空航天系列 用在连接部件的电接点 第013部分：三轴的8号、D型焊接R级塞孔电接点
产品标准 Aerospace series - Electrical contacts
used in elements of connection - Part 013: Contacts,
electrical, triaxial, size 8, female, type D,
solder, class R; product standard
prEN 3155-039-2001 航空航天系列 用在连接部件的电接点 第039部分：同轴塞孔16号D型焊接R级电接点
产品标准 Aerospace series - Electrical contacts
used in elements of connection - Part 039: Contacts,
electrical, coaxial, size 16, female, type D,
solder, class R; Product standard
prEN 3155-040-2001 航空航天系列 用在连接部件的电接点 第040部分：同轴12号插塞D型焊接R级电接点
产品标准 Aerospace series - Electrical contacts
used in elements of connection - Part 040: Contacts,
electrical, coaxial, size 12, male, type D,
solder, class R; Product standard
prEN 3155-041-2001 航空航天系列 用在连接部件的电接点 第041部分：同轴12号塞孔D型焊接R级电接点 产品标准
Aerospace series - Electrical contacts used
in elements of connection - Part 041: Contacts,
electrical, coaxial, size 12, female, type D,
solder, class R; Product standard
prEN 3155-058-2001 航空航天系列 用在连接部件的电接点 第058部分：同轴的16号插塞D型焊接R级电接点 产品标准/注：与EN
315 Aerospace series - Electrical contacts used
in elements of connection - Part 058: Contacts,
electrical, coaxial, size 16, male, type D,
solder, class R; Product standard / Note: Applies
in conjunction with EN 3155-001
prEN 3155-059-2001 航空航天系列 用在连接部件的电接点 第059部分：同轴16号塞孔D型焊接R级电接点 产品标准/注：与EN
3155- Aerospace series - Electrical contacts
used in elements of connection - Part 059: Contacts,
electrical, coaxial, size 16, female, type D,
solder, class R; Product standard / Note: Applies
in conjunction with EN 3155-001
prEN 3155-060-2001 航空航天系列 用在连接部件的电接点 第060部分：同轴12号插塞D型焊接R级电接点 产品标准/注：与EN
3155- Aerospace series - Electrical contacts
used in elements of connection - Part 060: Contacts,
electrical, coaxial, size 12, male, type D,
solder, class R; Product standard / Note: Applies
in conjunction with EN 3155-001
prEN 3155-061-2001 航空航天系列 用在连接部件的电接点 第061部分：同轴12号塞孔D型焊接R级电接点 产品标准/注：与EN
3155- Aerospace series - Electrical contacts
used in elements of connection - Part 061: Contacts,
electrical, coaxial, size 12, female, type D,
solder, class R; Product standard / Note: Applies
in conjunction with EN 3155-001
prEN 3646-007-2001 航空航天系列 连续操作温度175 ℃或 200℃、圆形卡口式联结电连接器 第007部分：、密封的焊接或铜焊圆法
Aerospace series - Connectors, electrical, circular,
bayonet coupling, operating temperature 175℃
or 200℃ continuous - Part 007: Receptacle, hermetic,
round flange, welding or brazing mounting; Product
standard
prEN 3716-003-1998 航空航天系列 数字数据传输用具有三线接口的单路连接器 第００３部分：焊接插座 产品标准
Aerospace series - Connectors, single-way with
triaxial interface, for transmission of digital
data - Part 003: Solder receptacle - Product
standard
prEN 3716-004-1998 航空航天系列 数字数据传输用具有三线接口的单路连接器 第００４部分：焊接插头 产品标准
Aerospace series - Connectors, single-way with
triaxial interface, for transmission of digital
data - Part 004: Solder plug - Product standard
prEN 61193-5-1999 软焊接 第5部分：印制电路板组件缺陷的登记和分析 IEC
61193-5: Soft soldering - Part 5: Registration
and analysis of defects on printed board assemblies
prEN 630-1992 铝及其焊接合金中的电弧焊接头 缺陷质量级别指南 Arc-welded
joints in aluminium and its weldable alloys;
guidance on quality levels for imperfections
(ISO/DIS 10042 modified)
prEN 756-2003 焊接消耗品 非合金和细精粒钢埋弧焊用实心、空心焊条和电焊剂混合物
分类 Welding consumables - Solid wire, tubular
cored electrodes and electrode-flux combinations
for submerged arc welding of non alloy and fine
grain steels - Classification / Note: Intended
as replacement for EN 756 (1995-10).
prEN ISO 11611-2003 焊接及相关工艺用防护服 Protective clothing
for use in welding and allied processes (ISO/DIS
11611:2003)
prEN ISO 14172-2003 焊接消耗材料 镍及镍合金手工金属电弧焊用涂剂焊条 分类
Welding consumables - Covered electrodes for
manual metal arc welding of nickel and nickel
alloys - Classification (ISO/FDIS 14172:2003)
prEN ISO 15012-1-2000 焊接和有关工艺中的健康和安全 空气过滤设备的要求、试验和标记 第1部分：焊接烟尘分离效率的试验
Health and safety in welding and allied processes
- Requirements, testing and marking of equipment
for air filtration - Part 1: Testing of the
separation efficiency for welding fume (ISO/DIS
15012-1:2000)
prEN ISO 15012-2-2000 焊接和有关工艺中的健康和安全 空气过滤设备的要求、试验和标记 第2部分：焊接烟尘排放装置的安装部位的
Health and safety in welding and allied processes
- Requirements, testing and marking of equipment
for air filtration - Part 2: Testing of the
capture zone of welding fume extraction devices
(ISO/DIS 15012-2:2000)
prEN ISO 15607-2003 金属焊接工艺的规范及验收 一般规则 Specification
and qualification of welding procedures for
metallic materials - General rules (ISO/FDIS
15607:2003)
prEN ISO 15609-1-2000 金属焊接工艺的规范和验收 焊接工艺规范 第1部分：电弧焊
Specification and approval of welding procedures
for metallic materials - Welding procedure specification
- Part 1: Arc welding (ISO/DIS 15609-1:2000)
prEN ISO 15609-3-2000 金属焊接工艺的规范和验收 焊接工艺规范 第3部分：电子束焊
Specification and approval of welding procedures
for metallic materials - Welding procedure specification
- Part 3: Electron beam welding (ISO/DIS 15609-3:2000)
prEN ISO 15609-4-2000 金属焊接工艺的规范和验收 焊接工艺规范 第4部分：激光束焊
Specification and approval of welding procedures
for metallic materials - Welding procedure specification
- Part 4: Laser beam welding (ISO/DIS 15609-4:2000)
prEN ISO 15609-5-2000 金属焊接工艺的规范和验收 焊接工艺规范 第5部分：电阻焊
Specification and approval of welding procedures
for metallic materials - Welding procedure specification
- Part 5: Resistance welding (ISO/DIS 15609-5:2000)
prEN ISO 15610-2003 金属焊接工艺的规范和验收 用经批准的焊接消耗材料验收
Specification and qualification of welding procedures
for metallic materials - Qualification based
on tested welding consumables (ISO/FDIS 15610:2003)
prEN ISO 15611-2003 金属焊接工艺的规范和验收 用焊接经验进行验收 Specification
and qualification of welding procedures for
metallic materials - AQualification based on
previous welding experience (ISO/FDIS 15611:2003)
prEN ISO 15612-2000 金属焊接工艺的规范和验收 用标准焊接工艺进行验收
Specification and approval of welding procedures
for metallic materials - Approval by a standard
welding procedure (ISO/DIS 15612:2000)
prEN ISO 15613-2003 金属焊接工艺的规范和验收 用试生产试验进行验收
Specification and qualification of welding procedure
for metallic materials - Qualification based
on pre-production welding test (ISO/FDIS 15613:2003)
prEN ISO 15614-1-2003 金属焊接工艺的规范和验收 焊接工艺试验 第1部分：钢的电弧焊和气焊及镍和镍合金的焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 1: Arc and gas welding of steels and
arc welding of nickel and nickel alloys (ISO/FDIS
15614-1:2003)
prEN ISO 15614-10-2000 金属焊接工艺的规范和验收 焊接工艺试验 第10部分：超基干焊
Specification and approval of welding procedures
for metallic materials - Welding procedure test
- Part 10: Hyperbasic dry welding (ISO/DIS 15614-10:2000)
prEN ISO 15614-12-2000 金属焊接工艺的规范和验收 焊接工艺试验 第12部分：点焊、缝焊及凸焊
Specification and approval of welding procedures
for metallic materials - Welding procedure test
- Part 12: Spot, sean and projection welding
(ISO/DIS 15614-12:2000)
prEN ISO 15614-2-2000 金属焊接工艺的规范和验收 焊接工艺试验 第2部分：铝及其合金的电弧焊
Specification and approval of welding procedures
for metallic materials - Welding procedure test
- Part 2: Arc welding of aluminium and its alloys
(ISO/DIS 15614-2:2000)
prEN ISO 15614-5-2003 金属焊接工艺的规范和验收 焊接工艺试验 第5部分：钛、锆及其合金的电弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 5: Arc welding of titanium, zirconium
and their alloys (ISO/FDIS 15614-5:2003)
prEN ISO 15614-9-2000 金属焊接工艺的规范和验收 焊接工艺试验 第9部分：水下超基湿焊
Specification and approval of welding procedures
for metallic materials - Welding procedure test
- Part 9: Underwater hyperbasic wet welding
(ISO/DIS 15614-9:2000)
prEN ISO 17660-2002 钢筋的焊接 Welding of reinforcing
steel (ISO/DIS 17660:2002)
prEN ISO 17662-2001 焊接 包括辅助加工在内的焊接设备的校正、鉴定及确认
Welding - Calibration, verification and validation
of equipment used for welding, including ancillary
activities (ISO/DIS 17662:2001)
prEN ISO 18273-2003 焊接消耗材料 铝及铝合金电弧焊用丝状电极、焊丝和焊条 分类
Welding consumables - Wire electrodes, wires
and rods for welding of aluminium and aluminium
alloys - Classification (ISO/FDIS 18273:2003)
prEN ISO 18274-2003 焊接消耗材料 镍及镍合金电弧焊用丝状及带状电极、焊丝和焊条 分类
Welding consumables - Wire and strip electrodes,
wires and rods for arc welding of nickel and
nickel alloys - Classification (ISO/FDIS 18274:2003)
prEN ISO 544-2003 焊接消耗品 焊接填缝金属的交货技术条件 产品型号、 尺寸、 公差和标记
Welding consumables - Technical delivery conditions
for welding filler metals - Type of product,
dimensions, tolerances and markings (ISO/FDIS
544:2003)
prEN ISO 5817-2003 焊接 钢、镍、钛与其合金熔化焊接接合 不理想性质量级别
Welding - Fusion-welded joints in steel, nickel,
titanium and their alloys (beam welding excluded)
- Quality levels for imperfections (ISO/FDIS
5817:2003)
prEN ISO 9692-1-2003 焊接和相关工艺 接头制备的推荐工艺 第1部分：钢的人工电弧焊、气体保护金属电弧焊、气焊和束焊
Welding and allied processes - Recommendations
for joint preparation - Part 1: Manual metal-arc
welding, gas-shielded metal-arc welding, gas
welding, TIG welding and beam welding of steels
(ISO/FDIS 9692-1:2003)
中国焊接标准(GB welding standards)
--------------------------------------------------------------------------------
编号 中文名称 英文名称
DL 5007-1992 电力建设施工及验收技术规范（火力发电厂焊接篇） ()
DL/T 1097-2008 火电厂凝汽器管板焊接技术规程 ()
DL/T 1117-2009 核电厂常规岛焊接工艺评定规程 ()
DL/T 1118-2009 核电厂常规岛焊接技术规程 ()
DL/T 370-2010 承压设备焊接接头金属磁记忆检测 ()
DL/T 5070-1997(2005) 水轮机金属蜗壳安装焊接工艺导则 ()
DL/T 5071-1997(2005) 混流式水轮机分瓣转轮组装焊接工艺导则 ()
DL/T 5210.7-2010 电力建设施工质量验收及评定规程 第7部分：焊接 ()
DL/T 678-1999 电站钢结构焊接通用技术条件 ()
DL/T 734-2000 火力发电厂锅炉汽包焊接修复技术导则 ()
DL/T 752-2010 火力发电厂异种钢焊接技术规程 ()
DL/T 754-2001 铝母线焊接技术规程 ()
DL/T 768.6-2002 电力金具制造质量 焊接件 ()
DL/T 816-2003 电力工业焊接操作技能教师资格考核规则 ()
DL/T 819-2002 火力发电厂焊接热处理技术规程 ()
DL/T 820-2002 管道焊接接头超声波检验技术规程 ()
DL/T 821-2002 钢制承压管道对接焊接接头射线检验技术规范 ()
DL/T 868-2004 焊接工艺评定规程 ()
DL/T 869-2004 火力发电厂焊接技术规程 ()
DL/T 905-2004 汽轮机叶片焊接修复技术导则 ()
FZ 92065-2006 不锈钢焊接式烘筒 Stainless steel welding
cylinder
GB 13075-1999 钢质焊接气瓶定期检验与评定 Periodic inspection
and evaluation of welded steel gas cylinders
GB 15579.1-2004 弧焊设备第1部分:焊接电源 Arc welding equipment--Part
1:Welding power sources
GB 15579.12-1998 弧焊设备安全要求第12部分:焊接电缆耦合装置 Safety
requirements for arc welding equipment--Part
12:Coupling devices for welding cables
GB 17268-2009 工业用非重复充装焊接钢瓶 Non-refillable steel
welded cylinders for industrial use
GB 17673-1999 液化丙烯、丙烷钢质焊接气瓶 Welded steel cylinders
for liquefied propylene and propane gases
GB 17878-2009 工业用非重复充装焊接钢瓶用瓶阀 Cylinder valve
for non-refillable steel welded industry cylinder
GB 20262-2006 焊接、切割及类似工艺用气瓶减压器安全规范 Safety specifications
of regulators for welding, cutting and the similar
processes
GB 24159-2009 焊接绝热气瓶 Welded insulated cylinders
GB 50128-2005 立式圆筒形钢制焊接储罐施工及验收规范 Code for construction
and acceptance of vertical cylindrical steel
welded storage tanks
GB 50236-1998 现场设备、工业管道焊接工程施工及验收规范 Code for
construction and acceptance of field equipment,
industrial pipe welding engineering
GB 50341-2003 立式圆筒形钢制焊接油罐设计规范 Code for design
of vertical cylindrical welded steel oil tanks
GB 5100-1994 钢质焊接气瓶 Welded steel gas cylinders
GB 6653-2008 焊接气瓶用钢板和钢带 Steel plates and strips
for welded gas cylinders
GB 8965.2-2009 防护服装 阻燃防护 第2部分：焊接服 Protective
clothing - Flame-retardant protection - Part
2: Protective clothing for welders
GB 9448-1999 焊接与切割安全 Safety in welding and cutting
GB/T 10752-2005 船用钢管对焊接头 Marine steel butt-welding
fittings
GB/T 11038-2009 船用辅锅炉及压力容器受压元件焊接技术条件 Welding
specification for pressure parts of marine auxiliary
boiler and pressure vessel
GB/T 11270.1-2002 超硬磨料制品金刚石圆锯片第1部分:焊接锯片 Abrasive
products--Diamond circular saw blade--Part 1:Welded
saw blades
GB/T 11363-2008 钎焊接头强度试验方法 Test method of the
strength for brazed and soldered joint
GB/T 11693-2008 船用法兰焊接座板 Welded bed plate for
flanges of ship pipe
GB/T 12770-2002 机械结构用不锈钢焊接钢管 Welded stainless
steel tubes for machine structures
GB/T 12771-2008 流体输送用不锈钢焊接钢管 Welded stainless
steel pipes for liquid delivery
GB/T 13147-2009 铜及铜合金复合钢板焊接技术要求 Specification
for welding of copper and copper alloy clad
steel plates
GB/T 13148-2008 不锈钢复合钢板焊接技术要求 Specification
for welding of stainless steel clad plate
GB/T 13149-2009 钛及钛合金复合钢板焊接技术要求 Specification
for welding of titanium and titanium alloy clad
steel plates
GB/T 13680-1992 焊接方螺母 Square weld nuts
GB/T 13681-1992 焊接六角螺母 Hexagon weld nuts
GB/T 1499.3-2002 钢筋混凝土用钢筋焊接网 Welded steel fabric
for the reinforcement of concrete
GB/T 15390-2005 工程用焊接结构弯板链、附件和链轮 Cranked-link
mill chains of welded construction,attachments
and sprockets
GB/T 15970.8-2005 金属和合金的腐蚀应力腐蚀试验第8部分:焊接试样的制备和应用
Corrosion of metals and alloys-Stress corrosion
test Part8:Preparation and use of specimens
to evaluate weldments
GB/T 16957-1997 复合钢板焊接接头力学性能试验方法 Mechanical
tests on welded joints in clad plates
GB/T 18256-2000 焊接钢管(埋弧焊除外)用于确认水压密实性的超声波检测方法
Welded steel tubes(except submerged arc-welded)--Ultrasonic
testing for verification of hydraulic leak-tightness
GB/T 18591-2001 焊接预热温度、道间温度及预热维持温度的测量指南 Welding--Guidance
on the measurement of preheating temperature，interpass
temperature and preheat maintenance temperature
GB/T 19247.1-2003 印制板组装第1部分:通用规范采用表面安装和相关组装技术的电子和电气焊接组装的要求
Printed board assemblies--Part 1: Generic specification--Requirements
for soldered electrical and electronic assemblies
using surface mount and related assembly technologies
GB/T 19247.2-2003 印制板组装第2部分: 分规范表面安装焊接组装的要求
Printed board assemblies--Part 2: Sectional
specification--Requirements for surface mount
solderedassemblies
GB/T 19247.3-2003 印制板组装第3部分:分规范通孔安装焊接组装的要求 Printed
board assemblies--Part 3:Sectional specification--Requirements
for through-hole mount soldered assemblies
GB/T 19247.4-2003 印制板组装第4部分:分规范引出端焊接组装的要求 Printed
board assemblies--Part 4:Sectional specification--Requirements
for terminal soldered assemblies
GB/T 19418-2003 钢的弧焊接头缺陷质量分级指南 Arc-welded joints
in steel--Guidance on quality levels for imperfections
GB/T 19419-2003 焊接管理任务与职责 Welding coordination--Tasks
and responsibilities
GB/T 19804-2005 焊接结构的一般尺寸公差和形位公差 Welding-General
tolerances for welded constructions-Dimensions
for lengths and angles-Shape and position
GB/T 19805-2005 焊接操作工技能评定 Qualification test
of welding operators
GB/T 19866-2005 焊接工艺规程及评定的一般原则 Specification
and qualification of welding procedures for
metallic materials-General rules
GB/T 19867.1-2005 电弧焊焊接工艺规程 Welding procedure
specification for arc welding
GB/T 19867.2-2008 气焊焊接工艺规程 Welding procedure
specification for gas welding
GB/T 19867.3-2008 电子束焊接工艺规程 Welding procedure
specification for electron beam welding
GB/T 19867.4-2008 激光焊接工艺规程 Welding procedure
specification for laser beam welding
GB/T 19867.5-2008 电阻焊焊接工艺规程 Welding procedure
specification for resistance welding
GB/T 19868.1-2005 基于试验焊接材料的工艺评定 Welding procedure
qualification based on tested welding consumables
GB/T 19868.2-2005 基于焊接经验的工艺评定 Welding procedure
qualification based on previous welding experience
GB/T 19868.3-2005 基于标准焊接规程的工艺评定 Welding procedure
qualification by adoption of a standard welding
procedure
GB/T 19868.4-2005 基于预生产焊接试验的工艺评定 Welding procedure
qualification based on pre-production welding
test
GB/T 19869.1-2005 钢、镍及镍合金的焊接工艺评定试验 Welding procedure
qualification test for steels,nickel and nickel
alloys
GB/T 19927-2005 曳引用焊接结构弯板链、附件和链轮 Cranked-link
drag chains of welded construction,attachments
and sprockets
GB/T 20490-2006 承压无缝和焊接（埋弧焊除外）钢管分层的超声检测 Seamless
and welded (except submerged arc-welded) steel
tubes for pressure purposes - Ultrasonic testing
for the detection of laminar imperfections
GB/T 21832-2008 奥氏体 铁素体型双相不锈钢焊接钢管 Austenitic
- Ferritic (duplex) grade stainless steel welded
tubes and pipes
GB/T 21835-2008 焊接钢管尺寸及单位长度重量 Dimensions and
masses per unit length of welded steel pipes
GB/T 22085.1-2008 电子束及激光焊接接头 缺欠质量分级指南 第1部分：钢
Electron and laser beam welded joints - Guidance
on quality levels for imperfactions - Part 1:Steel
GB/T 22085.2-2008 电子束及激光焊接接头 缺欠质量分级指南 第2部分：铝及铝合金
Electron and laser beam welded joints - Guidance
on quality levels for imperfections - Part 2:Aluminium
and its weldable alloys
GB/T 22087-2008 铝及铝合金的弧焊接头 缺欠质量分级指南 Arc-welded
joints in aluminium and its alloys - Guidance
on quality levels for imperfection
GB/T 23570-2009 金属切削机床焊接件 通用技术条件 Welding parts
for metal cutting machines - General specifications
GB/T 24181-2009 金刚石焊接锯片基体用钢 Steels for diamond
welded saw blades
GB/T 24187-2009 冷拔精密单层焊接钢管 Cold-drawn precision
single welded steel tubes
GB/T 24593-2009 锅炉和热交换器用奥氏体不锈钢焊接钢管 Welded austenitic
stainless steel tubes for boiler and heat-exchanger
GB/T 25112-2010 焊接、切割及类似工艺用压力表 ()
GB/T 25197-2010 静置常压焊接热塑性塑料储罐（槽） ()
GB/T 2550-2007 气体焊接设备 焊接、切割和类似作业用橡胶软管 Gas welding
equipment - Rubber hose for welding, cutting
and allied processes
GB/T 2649-1989 焊接接头机械性能试验取样方法 Methods of sampling
for mechanical properties tests of welded joint
GB/T 2650-2008 焊接接头冲击试验方法 Impact test methods
on welded joints
GB/T 2651-2008 焊接接头拉伸试验方法 Tensile test method
on welded joints
GB/T 2653-2008 焊接接头弯曲试验方法 Bend test methods
on welded joints
GB/T 2654-2008 焊接接头硬度试验方法 Hardness test methods
on welded joints
GB/T 3091-2008 低压流体输送用焊接钢管 Welded steel pipes
for low pressure liquid delivery
GB/T 3323-2005 金属熔化焊焊接接头射线照相 Radiographic examination
of fusion welded joints in metallic materials
GB/T 3375-1994 焊接术语 Welding terminology
GB/T 3429-2002 焊接用钢盘条 Wire rod for electrode
GB/T 3609.1-2008 职业眼面部防护 焊接防护 第1部分：焊接防护具 Qccupational
eye and face protection - Welding protection
- Part 1: Welding protector
GB/T 3609.2-2009 职业眼面部防护 焊接防护 第2部分：自动变光焊接滤光镜
Occupational eye and face protection - Welding
protection - Part 2: Automatic welding filter
GB/T 3747-2008 卡套式焊接管接头 24° cone connectors
- Weld male
GB/T 3757-2008 卡套式过板焊接管接头 24° cone connectors
- Weld-in bulkhead straight connector
GB/T 3758-2008 卡套式管接头用锥密封焊接接管 24° cone connectors
- Weld-on nipple
GB/T 4241-2006 焊接用不锈钢盘条 Stainless steel wire
rods for welding
GB/T 5095.12-1997 电子设备用机电元件基本试验规程及测量方法第12部分:锡焊试验第六篇:试验12f在机器焊接中封焊处耐焊剂和清
Electromechanical components for electronic
equipment--Basic testing procedures and measuring
methods--Part 12:Soldering tests--Section 6:Test
12f--Sealing against flux and cleaning solvents
inmachine soldering
GB/T 5107-2008 气焊设备 焊接、切割和相关工艺设备用软管接头 Gas welding
equipment - Hose connections for equipment for
welding, cutting and allied processes
GB/T 5185-2005 焊接及相关工艺方法代号 Welding and allied
processes-Nomenclature of processes and reference
numbers
GB/T 5642-2008 扩口式焊接管接头 Flared couplings - Weld
male
GB/T 6417.1-2005 金属熔化焊接头缺欠分类及说明 Classification
and explanation of imperfections in fusion welded
joints
GB/T 6417.2-2005 金属压力焊接头缺欠分类及说明 Classification
and explanation of imperfections in pressure
welded joints
GB/T 7659-1987 焊接结构用碳素钢铸件 Carbon steel castings
suitable for welded structure
GB/T 7899-2006 焊接、切割及类似工艺用气瓶减压器 Regulators for
welding, cutting and the similar processes
GB/T 802.3-2009 六角法兰面盖形螺母 焊接型 Acorn hexagon
nuts with flange - Welding type
GB/T 802.4-2009 六角低球面盖形螺母 焊接型 Hexagon cap nuts
- Welding type
GB/T 802.5-2009 非金属嵌件六角锁紧盖形螺母 焊接型 Prevailing
torque type hexagon acorn nuts with non-metallic
insert - Welding type
GB/T 902.1-2008 手工焊用焊接螺柱 Weld studs for manual
welding
GB/T 902.2-1989 机动弧焊用焊接螺柱 Weld studs for arc
welding
GB/T 902.3-2008 储能焊用焊接螺柱 Weld studs for capacitor
discharge welding
GB/T 9065.3-1988 液压软管接头连接尺寸焊接式或快换式 Hydraulic
fluid power--Hose connector--Connecting dimension
(Part 3--Welding or quick-action type)
GB/T 9506.11-1988 吸气剂支架焊接强度测试方法 Test method
for weld strenght of getter support
HG 20537.2-1992(2009) 管壳式换热器用奥氏体不锈钢焊接钢管技术要求
()
HG/T 20537.1-1992(2009) 奥氏体不锈钢焊接钢管选用规定 ()
HG/T 20537.3-1992(2009) 化工装置用奥氏体不锈钢焊接钢管技术要求
()
HG/T 20537.4-1992(2009) 化工装置用奥氏体不锈钢大口径焊接钢管技术要求
()
HG/T 20553-1993 化工配管用无缝及焊接钢管尺寸选用系列 ()
HG/T 21541-1992(2009) 焊接H型钢标准节点通用图 ()
HG/T 21610-1996(2009) 热轧普通型钢标准节点通用图(焊接连接) ()
HG/T 21632-1990 锻钢承插焊螺纹和对焊接管台 ()
HG/T 2537-1993(2009) 焊接用二氧化碳 ()
HG/T 3124-2009 焊接金属波纹管釜用机械密封技术条件 Specifications
of welded metal-bellows mechanical seal for
agitators
HG/T 3178-2002 尿素高压设备耐腐蚀不锈钢管子—管板的焊接工艺评定和焊工技能评定
()
HG/T 3180-2002 尿素高压设备衬里板及内件的焊接工艺评定和焊工技能评定 ()
HG/T 3661.1-1999(2009) 焊接切割用燃气 丙烯 ()
HG/T 3661.2-1999(2009) 焊接切割用燃气 丙烷 ()
HG/T 3728-2004(2009) 焊接用混合气体 氩-二氧化碳 ()
HGJ 212-1983 金属焊接结构湿气式气柜施工及验收规范 ()
HGJ 222-1992 铝及铝合金焊接技术规程 ()
HGJ 223-1992 铜及铜合金焊接及钎焊接技术规程 ()
JB 4708-2000 钢制压力容器焊接工艺评定 ()
JB 4744-2000 钢制压力容器产品焊接试板的力学性能检验 ()
JB/T 10264-2001 混流式水轮机焊接转轮上冠、下环铸件 ()
JB/T 10375-2002 焊接构件振动时效工艺参数选择及技术要求 ()
JB/T 10394.2-2002 涂装设备通用技术条件 第2部分：焊接件 ()
JB/T 10719-2007 焊接聚晶金刚石或立方氮化硼槽刀 ()
JB/T 10720-2007 焊接聚晶金刚石或立方氮化硼车刀 ()
JB/T 10721-2007 焊接聚晶金刚石或立方氮化硼铰刀 ()
JB/T 10722-2007 焊接聚晶金刚石或立方氮化硼立铣刀 ()
JB/T 10723-2007 焊接聚晶金刚石或立方氮化硼镗刀 ()
JB/T 10760-2007 工程机械 焊接式液压金属管总成 Construction
machinery-Welding hydraulic rigid tube assemblies
JB/T 10845-2008 无铅再流焊接通用工艺规范 ()
JB/T 11024-2010 大型核电机组汽轮机用焊接转子锻件 技术条件 Specification
for welded rotor forging of steam turbine for
large nuclear power units
JB/T 11062-2010 电子束焊接工艺指南 Recommendations for
electron beam welding
JB/T 11063-2010 激光焊接工艺指南 Rocommendations for
laser beam welding
JB/T 1613-1993(2006年确认) 锅炉受压元件焊接技术条件 ()
JB/T 1625-2002 工业锅炉焊接管孔 ()
JB/T 2634-1993(2006年确认) 管道成型焊接件技术条件 ()
JB/T 2636-1994(2006年确认) 锅炉受压元件焊接接头金相和断口检验方法
()
JB/T 3223-1996 焊接材料质量管理规程 ()
JB/T 3278-1992 焊接条缝筛板 ()
JB/T 4709-2000 钢制压力容器焊接规程 ()
JB/T 4734-2002 铝制焊接容器 ()
JB/T 4745-2002 钛制焊接容器 ()
JB/T 5000.3-2007 重型机械通用技术条件 第3部分：焊接件 Heavy mechanical
general techniques and standards-Part 3:And
standards welding
JB/T 53050-1992 钢制焊接单层压力容器 产品质量分等 ()
JB/T 5323-1991 立体仓库焊接式钢结构货架 技术条件 ()
JB/T 5716-1991 焊接件退火炉 能耗分等 ()
JB/T 5744.1-2010 木工锯条焊接机 第1部分：参数 Routing machines
for woodworking-Part 1:Parameters
JB/T 5744.2-2010 木工锯条焊接机 第2部分：精度 Routing machines
for woodworking-Part 2:Accuracy
JB/T 5911-2007 电除尘器焊接件 技术要求 Technical requirements
of welding parts of ESP
JB/T 5943-1991 工程机械 焊接件通用技术条件 ()
JB/T 5992.4-1992 机械制造工艺方法分类与代码 焊接 ()
JB/T 6046-1992 碳钢、低合金钢焊接构件 焊后热处理方法 ()
JB/T 6144.5-2007 锥密封胶管总成 焊接锥接头 ()
JB/T 6315-1992 汽轮机焊接工艺评定 ()
JB/T 6381.1-2007 锥密封焊接式 直通管接头 ()
JB/T 6381.2-2007 锥密封焊接式 直通55°非密封管螺纹管接头 ()
JB/T 6381.3-2007 锥密封焊接式 直通55°密封管螺纹管接头 ()
JB/T 6381.4-2007 锥密封焊接式 直通60°密封管螺纹管接头 ()
JB/T 6382.1-2007 锥密封焊接式90o弯管接头 ()
JB/T 6382.2-2007 锥密封焊接式55o非密封管螺纹90o弯管接头 ()
JB/T 6382.3-2007 锥密封焊接式55o密封管螺纹90o弯管接头 ()
JB/T 6382.4-2007 锥密封焊接式60o密封管螺纹90o弯管接头 ()
JB/T 6383.1-2007 锥密封两端焊接式直通管接头 ()
JB/T 6383.2-2007 锥密封焊接式直角管接头 ()
JB/T 6383.3-2007 锥密封焊接式三通管接头 ()
JB/T 6384.1-2007 锥密封焊接式隔壁直角管接头 ()
JB/T 6384.2-2007 锥密封焊接式隔壁直通管接头 ()
JB/T 6385-2007 锥密封焊接式压力表管接头 ()
JB/T 6386-2007 锥密封焊接式管接头 技术条件 ()
JB/T 6553-1993 木工锯条焊接机 技术条件 ()
JB/T 6567-2006 刀具摩擦焊接质量要求和评定方法 Quality requirement
and evaluation method for cutting tool frietion
welding
JB/T 6753.4-1993 电工设备设备构件公差 焊接结构一般公差 ()
JB/T 6895-2006 铝制空气分离设备安装焊接 技术规范 Installation
welding specification for aluminum-made air
separation plants
JB/T 6965-1993 焊接操作机 ()
JB/T 7167-2004 凿岩机械与气动工具 焊接件 通用技术条件 ()
JB/T 7349-2002 混流式水轮机焊接转轮不锈钢叶片铸件 ()
JB/T 7488-2008 无铅波峰焊接通用工艺规范 General technological
specification for lead-free wavesoldering
JB/T 7600.2-2008 电线电缆PNS型机用线盘 第2部分：钢板焊接机用线盘
()
JB/T 7601.4-2008 电线电缆专用设备 基本技术要求 第4部分：焊接件 ()
JB/T 8024.4-1999 机床夹具零件及部件 焊接手柄 ()
JB/T 8385-1996(2009) 焊接、切割及类似工艺用管路减压器 ()
JB/T 8423-1996(2009) 电焊条焊接工艺性能评定方法 ()
JB/T 8609-1997 锻压机械焊接件技术条件 ()
JB/T 8723-2008 焊接金属波纹管机械密封 ()
JB/T 8833-2001 焊接变位机 ()
JB/T 8991-1999 发电机锡焊接头检测方法 ()
JB/T 8997.2-1999 电线电缆大孔径用线盘 第2部分:钢板焊接机用线盘 ()
JB/T 9187-1999 焊接滚轮架 ()
JB/T 9271-1999(2009) 焊接、切割及类似工艺用压力表 ()
JB/T 9486-2010 连接密封焊接波纹管尺寸系列 Dimensional series
of the welded bellows for connecting and sealing
JB/T 978-1977 焊接式铰接管接头 ()
JB/T 979-1977 直角焊接接管 ()
JB/T 998-1977 焊接式铰接管接头体 ()
JC/T 532-2007 建材机械钢焊接件通用技术条件 The universal technique
specification of steel weldment for building
materials machine
MT/T 904-2002 焊接结构软岩钻杆与钻头 ()
NB/T 47002.1-2009 压力容器用爆炸焊接复合板 第1部分：不锈钢—钢复合板
()
NB/T 47002.2-2009 压力容器用爆炸焊接复合板 第2部分：镍—钢复合板 ()
NB/T 47002.3-2009 压力容器用爆炸焊接复合板 第3部分：钛—钢复合板 ()
NB/T 47002.4-2009 压力容器用爆炸焊接复合板 第4部分：铜—钢复合板 ()
NB/T 47003.1-2009 钢制焊接常压容器 ()
QB/T 1588.1-1992(2009) 轻工机械焊接件通用技术条件 ()
QB/T 2003-1994 食品工业用不锈钢对缝焊接管件 ()
QB/T 2072.3-1994(2009) 制糖机械压力容器通用零部件换热器用奥氏体不锈钢焊接钢管
()
QB/T 4025-2010 激光焊接夹套 Laser welding jacket
QC/T 259-1998(2005) 车轮轮辋/轮幅焊接强度要求及试验方法 ()
QC/T 29087-1992(2009) 汽车焊接加工零件未注公差尺寸的极限偏差 ()
QC/T 337-1999(2009) 焊接叉 ()
QC/T 372-1999(2009) 焊接式单头夹片 ()
QC/T 609-1999(2009) 板式焊接螺母 ()
QC/T 712-2004 汽车安全带装置固定连接用焊接螺母 Weld nuts for
fixing the safety belt devices of vehicle
SB/T 226-2007 食品机械通用技术条件 焊接、铆接件技术要求 ()
SD 340-1989 火力发电厂锅炉、压力容器焊接工艺评定规程 ()
SH 3046-1992(2009) 石油化工立式圆筒形钢制焊接储罐设计规范 ()
SH/T 3127-2001 石油化工管式炉铬钼钢焊接回弯头技术规范 ()
SH/T 3417-2007 石油化工管式炉高合金炉管焊接工程技术条件 ()
SH/T 3520-2004 石油化工工程铬钼耐热钢管道焊接技术规程 ()
SH/T 3523-1999(2009) 石油化工铬镍奥氏体钢、铁镍合金和镍合金管道焊接规程
()
SH/T 3523-2009 石油化工铬镍不锈钢、铁镍合金和镍合金焊接规程 Specificaton
for welding of Cr-Ni stainless steel,Fe-Ni and
Ni alloy in petrochemical industry
SH/T 3525-2004 石油化工低温钢焊接规程 ()
SH/T 3526-2004 石油化工异种钢焊接规程 ()
SH/T 3527-1999(2009) 石油化工不锈钢复合钢焊接规程 ()
SH/T 3527-2009 石油化工不锈钢复合钢焊接规程 Specificaton for
welding of stainless clad steel in petrochemical
industry
SY 6516-2001 石油工业电焊焊接作业安全规程 ()
SY/T 0307-1996 滩海石油工程立式圆筒形钢制焊接固定顶储罐技术规范 ()
SY/T 0452-2002 石油天然气金属管道焊接工艺评定 ()
SY/T 0604-2005 工厂焊接液体储罐规范 ()
SY/T 0606-2006 现场焊接液体储罐规范 Specification for
field welded tanks for storage of production
liquids
SY/T 0608-2006 大型焊接低压储罐的设计与建造 Design and construction
of Large,Welded,Low-Pressure Storage Tanks
SY/T 307-1996 滩海石油工程立式圆筒形钢制焊接固定顶储罐技术规范 ()
SY/T 4071-1993 管道下向焊接工艺规程 ()
SY/T 4083-1995 电热法消除焊接应力工艺规程 ()
SY/T 4103-2006 钢质管道焊接及验收 Welding and acceptance
standard for steel Pipings and pipelines
SY/T 5561-2008 摩擦焊接钻杆 ()
SY/T 5768-2006 一般结构用焊接钢管 Welded steel pipe for
normal structure purposes
SY/T 5921-2000 立式圆筒形钢制焊接原油罐修理规程 ()
SY/T 6423.4-1999(2007) 石油天然气工业 承压钢管无损检测方法 焊接钢管焊缝附近分层缺欠的超声波检测
()
SY/T 6423.5-1999(2007) 石油天然气工业 承压钢管无损检测方法 焊接钢管制造用钢带/钢板分层缺欠的超声波检测
()
SY/T 6423.6-1999(2007) 石油天然气工业 承压钢管无损检测方法 无缝和焊接（埋弧焊除外）钢管分层缺欠的超声波检测
()
SY/T 6423.7-1999(2007) 石油天然气工业 承压钢管无损检测方法 无缝和焊接钢管管端分层缺欠的超声波检测
()
SY/T 6554-2003 在用设备的焊接或热分接程序 ()
SY/T 6715-2008 钢管管接头焊接 ()
SY/T 6765-2009 摩擦焊接加重钻杆 ()
YB 3301-2005 焊接H型钢 ()
YB 4103-2000 换热器用焊接钢管 ()
YB/T 036.11-1992(2005) 冶金设备制造通用技术条件 焊接件 ()
YB/T 036.11-1992(2009) 冶金设备制造通用技术条件 焊接件 ()
YB/T 3220.8-1987(2005) 宝钢二高炉设备制造通用技术条件 焊接件 ()
YB/T 4112-2002 结构用高强度耐候焊接钢管 ()
YB/T 4137-2005 低焊接裂纹敏感性高强度钢板 ()
YB/T 4202-2009 建筑脚手架用焊接钢管 Welded steel pipes
for scaffolding
YB/T 4204-2009 供水用不锈钢焊接钢管 Welded stainless steel
tubes for water supply
YB/T 5091-1993(2005) 惰性气体保护焊接用不锈钢棒及钢丝 ()
YB/T 5092-2005 焊接用不锈钢丝 ()
YB/T 5247-1993(2005) 焊接用高温合金冷拉丝 ()
YB/T 5363-2006 装饰用焊接不锈钢管 ()
YS/T 253-1994(2005) 硬质合金焊接车刀片 ()
YS/T 79-2006 硬质合金焊接刀片 ()
ISO焊接标准(ISO welding standards)
--------------------------------------------------------------------------------
编号 中文名称 英文名称
IEC 60068-2-20-2008 环境试验.第2部分:试验.试验T:带导线装置的可焊接性和焊接热抵抗性的试验方法
Environmental testing - Part 2: Tests - Test
T: Test methods for soldeability and resistance
to soldering heat of devices with leads
IEC 60068-2-58-2005 环境试验.第2-58部分:试验.试验Td:表面安装元器件(SMD)用可焊性、耐金属化溶融和耐焊接热的试验方法
Environmental testing - Part 2-58: Tests - Test
Td: Test methods for solderability, resistance
to dissolution of metallization and to soldering
heat of surface mounting devices (SMD)
IEC 60317-35 Edition 1.2-2000 绕阻线特殊类型规范.第35部分:155级带粘合层的可焊接的聚氨酯瓷漆园形铜线
Specifications for particular types of winding
wires - Part 35: Solderable polyurethane enamelled
round copper wire, class 155, with a bonding
layer
IEC 60317-35-1992 特种绕组线规范.第35部分:155级有粘结层的可焊接聚氨酯漆包圆铜线
Specification for particular types of winding
wires; part 35: solderable polyurethane enamelled
round copper wire, class 155, with a bonding
layer
IEC 60317-36 Edition 1.2-2000 绕阻线特殊类型规范.第36部分:180级带粘合层的可焊接的聚酯瓷漆园形铜线
Specifications for particular types of winding
wires - Part 36: Solderable polyesterimide enamelled
round copper wire, class 180, with a bonding
layer
IEC 60317-36-1992 特种绕组线规范.第36部分:180级带粘结层的可软焊接聚酰胺酯漆包圆铜线
Specifications for particular types of winding
wires; part 36: solderable polyesterimide enamelled
round copper wire, class 180, with a bonding
layer
IEC 60317-55-2007 特种绕组线规范.第55部分:涂覆聚酰胺的可焊接聚亚安酯漆包圆铜线.180级
Specifications for particular types of winding
wires - Part 55: Solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 180
IEC 60512-12-1-2006 电子设备用连接器.试验和测量.第12-1部分:焊接试验.试验12a:
焊料湿浴法测量可焊性 Connectors for electronic equipment
- Tests and measurements - Part 12-1: Soldering
tests - Test 12a: Solderability, wetting, solder
bath method
IEC 60749-20-2008 半导体器件.机械和气候试验方法.第20部分:SMDs塑料囊状物抗湿气和焊接热的综合影响
Semiconductor devices - Mechanical and climatic
test methods - Part 20: Resistance of plastic-encapsulated
SMDs to the combined effect of moisture and
soldering heat
IEC 60947-4-2006 电弧焊接设备.第4部分:运行中检查和试验 Arc welding
equipment - Part 4: In-service inspection and
testing
IEC 60974-1-2005 弧焊设备.第1部分:焊接电源 Arc welding
equipment - Part 1: Welding power sources
IEC 60974-12-2005 弧焊设备.第12部分:焊接电缆的耦合器 Arc-welding
equipment - Part 12: Coupling devices for welding
cables
IEC 60974-2-2007 电弧焊接设备.第2部分:液体冷却系统 Arc welding
equipment - Part 2: Liquid cooling systems
IEC 60974-8-2009 弧焊设备.第8部分:焊接和等离子切割系统用气体控制台
Arc welding equipment - Part 8: Gas consoles
for welding and plasma cutting systems
IEC 61076-4-107-2001 电子设备用连接器 第4 -107部分：有质量评定的印制板连接器
基本网格为2.0mm，固定件有印制版的焊接终端 Connectors for electronic
equipment - Part 4-107: Printed board connectors
with assessed quality; Detail specification
for shielded two-part connectors having a basic
grid of 2,0 mm, fixed part with solder and press-in
terminations for printed boards, free part with
non-accessible insulation displacement and crimp
terminations
IEC 61188-5-2-2003 印制电路板和印制电路板组件.设计和使用.第5-2部分:焊接(焊接区/焊缝)考虑.分立器件
Printed boards and printed board assemblies
- Design and use - Part 5-2: Attachment (land/joint)
considerations; Discrete components
IEC 61188-5-3-2007 印制板和印制板组件.设计和使用.第5-3部分:焊接(焊接区/接缝)考虑.两面带有翅形引线的部件
Printed boards and printed board assemblies
- Design and use - Part 5-3: Attachment (land/joint)
considerations - Components with gull-wing leads
on two sides
IEC 61188-5-4-2007 印制板和印制板组件.设计和使用.第5-4部分:焊接(焊接区/接缝)考虑.两面带有J形引线的部件
Printed boards and printed board assemblies
- Design and use - Part 5-4: Attachment (land/joint)
considerations - Components with J leads on
two sides
IEC 61188-5-5-2007 印制板和印制板组件.设计和使用.第5-5部分:焊接(焊接区/接缝)考虑.四面带有翅形引线的部件
Printed boards and printed board assemblies
- Design and use - Part 5-5: Attachment (land/joint)
considerations - Components with gull-wing leads
on four sides
IEC 61190-1-3 AMD 1-2010 电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料用要求
Attachment materials for electronic assembly
- Part 1-3: Requirements for electronic grade
solder alloys and fluxed and non-fluxed solid
solder for electronic soldering applications
IEC 61190-1-3-2007 电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料用要求
Attachment materials for electronic assembly
- Part 1-3: Requirements for electronic grade
solder alloys and fluxed and non-fluxed solid
solders for electronic soldering applications
IEC 61191-1-1998 印刷电路板组件 第1部分:总规范 使用表面安装和相关装配技术的焊接电气和电子组件的要求
Printed board assemblies - Part 1: Generic specification
- Requirements for soldered electrical and electronic
assemblies using surface mount and related assembly
technologies
IEC 61191-2-1998 印刷电路板组件 第2部分:分规范 表面安装焊接组件的要求
Printed board assemblies - Part 2: Sectional
specification - Requirements for surface mount
soldered assemblies
IEC 61191-3-1998 印刷电路板组件 第3部分:分规范 通孔安装焊接组件的要求
Printed board assemblies - Part 3: Sectional
specification - Requirements for through-hole
mount soldered assemblies
IEC 61191-4-1998 印刷电路板组件 第4部分:分规范 端点焊接组件的要求
Printed board assemblies - Part 4: Sectional
specification - Requirements for terminal soldered
assemblies
IEC 61191-6-2010 印刷电路板组件.第6部分:球栅阵列和网格阵列的焊接接头内空隙及测量方法用评定标准
Printed board assemblies - Part 6: Evaluation
criteria for voids in soldered joints of BGA
and LGA and measurement method
IEC 61192-5-2007 焊接电子组件的工艺要求.第5部分:焊接电子组件的再加工、改进和检修
Workmanship requirements for soldered electronic
assemblies - Part 5: Rework, modification and
repair of soldered electronic assemblies
IEC 61760-3-2010 表面贴装技术.第3部分:通孔回流(THR)焊接用组件规范的标准方法
Surface mounting technology - Part 3: Standard
method for the specification of components for
through hole reflow (THR) soldering
IEC 62081-1999 弧焊接设备.安装和使用 Arc welding equipment
- Installation and use
IEC 62135-1-2008 电阻焊接设备.第1部分:设计、制造和安装用安全要求 Resistance
welding equipment - Part 1: Safety requirements
for design, manufacture and installation
IEC 62135-2-2007 电阻焊接设备.第2部分:电磁兼容性(EMC)要求 Resistance
welding equipment - Part 2: Electromagnetic
compatibility (EMC) requirements
IEC 62137-1-1-2007 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-1部分:拉拔强度试验
Surface mounting technology - Environmental
and endurance test methods for surface mount
solder joint - Part 1-1: Pull strength test
IEC 62137-1-2-2007 表面安装技术.表面装配焊接接缝的环境和耐久性试验方法.第1-2部分:剪切强度试验
Surface mounting technology - Environmental
and endurance test methods for surface mount
solder joint - Part 1-2: Shear strength test
IEC/PAS 62174 Edition 1.0-2000 通孔固定装置的焊接温度抗性
Resistance to soldering temperature for through-hole
mounted devices
ISO 10042 Technical Corrigendum 1-2006 焊接.铝和铝合金的弧焊接头.缺陷质量分级.技术勘误1
Welding - Arc-welded joints in aluminium and
its alloys - Quality levels for imperfections;
Technical Corrigendum 1
ISO 10042-2005 焊接 铝和铝合金的弧焊接头 缺陷质量分级指南 Welding
- Arc-welded joints in aluminium and its alloys
- Quality levels for imperfections
ISO 10124-1994 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 层状缺陷检测用超声检验
Seamless and welded (except submerged arc-welded)
steel tubes for pressure purposes - Ultrasonic
testing for the detection of laminar imperfections
ISO 10332-1994 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 验证液压防泄漏用超声波检验
Seamless and welded (except submerged arc-welded)
steel tubes for pressure purposes; ultrasonic
testing for verification of hydraulic leak-tightness
ISO 10447-2006 焊接.点焊、凸焊和有缝焊的剥离和凿剥离试验 Resistance
welding - Peel and chisel testing of resistance
spot and projection welds
ISO 10460-2005 储气瓶.焊接的碳素钢储气瓶.定期检验和试验 Gas cylinders
- Welded carbon-steel gas cylinders - Periodic
inspection and testing
ISO 10464-2004 气瓶.液化石油气(LPG)用可再填充的焊接钢制气瓶.周期检验和试验
Gas cylinders - Refillable welded steel cylinders
for liquefied petroleum gas (LPG) - Periodic
inspection and testing
ISO 10543-1993 压力用无缝及热拉伸焊接钢管 全周边超声波厚度检测 Seamless
and hot-stretch-reduced welded steel tubes for
pressure purposes; full peripheral ultrasonic
thickness testing
ISO 10544-1992 钢筋混凝土和制造焊接网用冷轧钢丝 Cold-reduced
steel wire for the reinforcement of concrete
and the manufacture of welded fabric
ISO 10656 Technical Corrigendum 1-2000 电阻焊接
焊接枪用电源积分变压器 技术勘误1 Electric resistance welding
- Integrated transformers for welding guns;
Technical Corrigendum 1
ISO 10656-1996 电阻焊接 焊接枪用电源积分变压器 Electric resistance
welding - Integrated transformers for welding
guns
ISO 10691-2004 气瓶.液化石油气(LPG)用可再填充的焊接钢制气瓶.装填前后及装填期间的检验规程
Gas cylinders - Refillable welded steel cylinders
for liquified petroleum gas (LPG) - Procedures
for checking before, during and after filling
ISO 1071-2003 焊接耗材.铸铁熔焊用涂敷电焊条、焊丝、焊棒和药芯焊条.分类
Welding consumables - Covered electrodes, wires,
rods and tubular cored electrodes for fusion
welding of cast iron - Classification
ISO 10763-1994 液压传动 端面平齐的无缝和焊接型精密钢管 尺寸及标称工作压力
Hydraulic fluid power - Plain-end, seamless
and welded precision steel tubes - Dimensions
and nominal working pressures
ISO 10799-2001 结构钢 冷成型、焊接、中空结构截面 技术交货要求 Structural
steels - Cold-formed, welded, structural hollow
sections - Technical delivery requirements
ISO 10882-1-2001 焊接和相关工艺的卫生和安全 操作人员呼吸区域的空气中悬浮颗粒物及气体的取样
第1部分：空气中悬浮颗粒 Health and safety in welding and
allied processes - Sampling of airborne particles
and gases in the operator's breathing zone -
Part 1: Sampling of airborne particles
ISO 10882-2-2000 焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样
第2部分:气体取样 Health and safety in welding and allied
processes - Sampling of airborne particles and
gases in the operator's breathing zone - Part
2: Sampling of gases
ISO 11082-1992 钢筋混凝土结构用焊接网认证方案 Certification
scheme for welded fabric for the reinforcement
of concrete structures
ISO 11496-1993 压力用途的承压无缝和焊接钢管 层间不完整性检查的管端超声波检测
Seamless and welded steel tubes for pressure
purposes; ultrasonic testing of tube ends for
the detection of laminar imperfections
ISO 11611-2007 焊接和类似工艺用防护服装 Protective clothing
for use in welding and allied processes
ISO 11970-2001 钢铸件制造焊接焊接工艺的规范和验收 Specification
and approval of welding procedures for production
welding of steel castings
ISO 12094-1994 压力用途的承压焊接钢管 焊接钢管用钢带/钢板分层缺陷检测用超声波试验
Welded steel tubes for pressure purposes - Ultrasonic
testing for the detection of laminar imperfections
in strips/plates used in the manufacture of
welded tubes
ISO 12095-1994 压力用途的承压无缝和焊接钢管 液体渗透试验 Seamless
and welded steel tubes for pressure purposes
- Liquid penetrant testing
ISO 12096-1996 压力用途的承压埋弧焊接钢管 焊缝缺陷检测用X射线检查 Submerged
arc-welded steel tubes for pressure purposes
- Radiographic testing of the weld seam for
the detection of imperfections
ISO 12170-1996 气焊设备 焊接及相关工艺用热塑性软管 Gas welding
equipment - Thermoplastic hoses for welding
and allied processes
ISO 12176-2-2008 塑料管材和管件.熔解焊接聚乙烯系统用设备.第2部分:电熔焊
Plastics pipes and fittings - Equipment for
fusion jointing polyethylene systems - Part
2: Electrofusion
ISO 12176-3-2006 塑料管材和管件.聚乙烯系统的熔焊接设备.第3部分:操作者标记
Plastics pipes and fittings - Equipment for
fusion jointing polyethylene systems - Part
3: Operator's badge
ISO 13663-1995 压力用途的承压焊接钢管 焊缝周围分层缺陷检测用超声波试验
Welded steel tubes for pressure purposes - Ultrasonic
testing of the area adjacent to the weld seam
for the detection of laminar imperfections
ISO 13664-1997 压力用途的承压无缝和焊接钢管 管端分层组织缺陷探测用磁粉检验
Seamless and welded steel tubes for pressure
purposes - Magnetic particle inspection of the
tube ends for the detection of laminar imperfections
ISO 13665-1997 压力用途的承压无缝和焊接钢管 管身表面缺陷探测用磁粉检验
Seamless and welded steel tubes for pressure
purposes - Magnetic particle inspection of the
tube body for the detection of surface imperfections
ISO 13847 Technical Corrigendum 1-2001 石油和天然气工业.管道输送系统.管道焊接.技术勘误1
Petroleum and natural gas industries - Pipeline
transportation systems - Welding of pipelines;
Technical Corrigendum 1
ISO 13847-2000 石油和天然气工业 管道输送系统 管道的焊接 Petroleum
and natural gas industrie - Pipeline transportation
systems - Welding of pipelines
ISO 13916-1996 焊接 预热温度、道间温度和预热维持温度测量的指南 Welding
- Guidance on the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature
ISO 13918-2008 焊接.螺柱电弧焊用螺柱和陶瓷套圈 Welding - Studs
and ceramic ferrules for arc stud welding
ISO 13919-1-1996 焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分:钢
Welding - Electron and laser-beam welded joints
- Guidance on quality levels for imperfections
- Part 1: Steel
ISO 13919-2-2001 焊接 电子束和激光束焊接接头 缺陷质量等级指南 第2部分：铝及其可焊合金
Welding - Electron and laser beam welded joints;
Guidance on quality levels for imperfections
- Part 2: Aluminium and its weldable alloys
ISO 13920-1996 焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置 Welding
- General tolerances for welded constructions
- Dimensions for lengths and angles - Shape
and position
ISO 13950 Technical Corrigendum 1-2008 塑料管和配件.电熔焊接头的自动识别系统.技术勘误1
Plastics pipes and fittings - Automatic recognition
systems for electrofusion joints; Technical
Corrigendum 1
ISO 13950-2007 塑料管和配件.电熔焊接头的自动识别系统 Plastics
pipes and fittings - Automatic recognition systems
for electrofusion joints
ISO 14114-1999 气焊设备 焊接、切割及相关工艺用的乙炔汇流系统 一般要求
Gas welding equipment - Acetylene manifold systems
for welding, cutting and allied processes -
General requirements
ISO 14172-2008 焊接消耗品.镍和镍合金的手工金属弧焊用涂敷焊条.分类 Welding
consumables - Covered electrodes for manual
metal arc welding of nickel and nickel alloys
- Classification
ISO 14174-2004 焊接消耗品.埋弧焊用助熔剂.分类 Welding consumables
- Fluxes for submerged arc welding - Classification
ISO 14175-2008 焊接消耗品.熔焊及相关工艺用气体和气体混合物 Welding
consumables - Gases and gas mixtures for fusion
welding and allied processes
ISO 14323-2006 电阻点焊和凸焊.焊接破坏试验.影响剪切试验和剪切试验的样本尺寸和程序
Resistance spot welding and projection welds
- Destructive testing of welds - Specimen dimensions
and procedure for impact shear test and cross-tension
testing
ISO 14327-2004 电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程 Resistance
welding - Procedures for determining the weldability
lobe for resistance spot, projection and seam
welding
ISO 14329-2003 电阻焊接.焊缝的有损检验.电阻点焊、滚焊和凸焊焊缝的疲劳类型和几何学上的测量
Resistance welding - Destructive tests of welds
- Failure types and geometric measurements for
resistance spot, seam, and projection welds
ISO 14341-2010 焊接消耗品.非合金钢和细粒钢的金属气体保护焊用焊丝和焊接沉积物.分类
Welding consumables - Wire electrodes and weld
deposits for gas shielded metal arc welding
of non alloy and fine grain steels - Classification
ISO 14344-2010 焊接消耗品.填充物材料和助熔剂的采购 Welding consumables
- Procurement of filler materials and fluxes
ISO 14347-2008 疲劳.焊接中空部件连接件用设计程序.推荐 Fatigue
- Design procedure for welded hollow-section
joints - Recommendations
ISO 14372-2000 焊接耗材 通过测量扩散氢方法测定手工电弧焊焊条的抗湿性 Welding
consumables - Determination of moisture resistance
of manual metal arc welding electrodes by measurement
of diffusible hydrogen
ISO 14373-2006 电阻焊接.无涂层和有涂层低碳钢的点焊程序 Resistance
welding - Procedure for spot welding of uncoated
and coated low carbon steels
ISO 14554-1-2000 焊接质量要求 金属材料的电阻焊接 第1部分:完整质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Part 1: Comprehensive
quality requirements
ISO 14554-2-2000 焊接质量要求 金属材料的电阻焊接 第2部分:基本质量要求
Quality requirements for welding - Resistance
welding of metallic materials - Part 2: Elementary
quality requirements
ISO 14555-2006 焊接.金属材料的电弧螺栓焊 Welding - Arc stud
welding of metallic materials
ISO 14731-2006 焊接管理.任务和职责 Welding coordination
- Tasks and responsibilities
ISO 14732-1998 焊接人员 金属材料的完全机械化焊接和自动焊接的熔化焊及电阻焊操作人员的资格审查
Welding personnel - Approval testing of welding
operators for fusion welding and of resistance
weld setters for fully mechanized and automatic
welding of metallic materials
ISO 14744-1-2008 焊接.电子束焊接机器的验收检验.第1部分:原则和验收条件
Welding - Acceptance inspection of electron
beam welding machines - Part 1: Principles and
acceptance conditions
ISO 14744-2-2000 焊接 电子束焊接机的验收检验 第2部分:加速电压特性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 2: Measurement
of accelerating voltage characteristics
ISO 14744-3-2000 焊接 电子束焊接机的验收检验 第3部分:电子束电流特性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 3: Measurement
of beam current characteristics
ISO 14744-4-2000 焊接 电子束焊接机的验收检验 第4部分:焊接速度的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 4: Measurement
of welding speed
ISO 14744-5-2000 焊接 电子束焊接机的验收检验 第5部分:偏转精度的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 5: Measurement
of run-out accuracy
ISO 14744-6-2000 焊接 电子束焊接机的验收检验 第6部分:焊点位置稳定性的测量
Welding - Acceptance inspection of electron
beam welding machines - Part 6: Measurement
of stability of spot position
ISO 15011-1-2009 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.第1部分:电弧焊产生的烟尘排放率测定和烟尘采集
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 1: Determination of fume emission rate
during arc welding and collection of fume for
analysis
ISO 15011-2-2009 焊接和相关工艺中的健康和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:在电弧焊,切削加工和刨
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 2: Determination of the emission rates
of carbon monoxide (CO), carbon dioxide (CO<(Index)2>),
nitrogen monoxide (NO) and nitrogen dioxide
(NO<(Index)2>) during arc welding, cutting
and gouging
ISO 15011-3-2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 3: Determination of ozone emission rate
during arc welding
ISO 15011-4 AMD 1-2008 焊接和相关工艺中的健康和安全.烟尘和气体取样用实验室方法.第4部分:烟尘数据单.修改件1
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 4: Fume data sheets; Amendment 1
ISO 15011-4-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室方法.第4部分:烟尘数据单
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 4: Fume data sheets
ISO 15012-1-2004 焊接和相关工艺中的健康和安全.空气过滤用设备的试验和标记要求.第1部分:焊接烟尘分离效率的试验
Health and safety in welding and allied processes
- Requirements testing and marking of equipment
for air filtration - Part 1: Testing of the
separation efficiency for welding fume
ISO 15012-2-2008 焊接和相关工艺中的卫生和安全.空气过滤设备的要求、测试和标记.第2部分:采集罩和喷嘴的最小空气体积流率的
Health and safety in welding and allied processes
- Requirements, testing and marking of equipment
for air filtration - Part 2: Determination of
the minimum air volume flow rate of captor hoods
and nozzles
ISO 15607 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.一般规则.技术勘误1
Specification and qualification of welding procedures
for metallic materials - General rules; Technical
Corrigendum 1
ISO 15607-2003 金属材料焊接程序规范和合格鉴定.总则 Specification
and qualification of welding procedures for
metallic materials - General rules
ISO 15609-1 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.焊接过程规范.第1部分:电弧焊接.技术勘误1
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 1: Arc welding; Technical Corrigendum
1
ISO 15609-1-2004 金属材料的焊接程序规范和鉴定.焊接程序规范.第1部分:弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 1: Arc welding
ISO 15609-2-2001 金属材料的焊接程序规范和鉴定 焊接程序规范 第2部分：气焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 2: Gas welding
ISO 15609-3-2004 金属材料的焊接程序规范和鉴定.焊接程序规范.第3部分:电子束焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 3: Electron beam welding
ISO 15609-4-2009 金属材料焊接工艺规范和条件限制.焊接工艺规范.第4部分:激光束焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 4: Laser beam welding
ISO 15609-5-2004 金属材料焊接程序的规范和鉴定.焊接程序规范.第5部分:电阻焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure specification
- Part 5: Resistance welding
ISO 15610-2003 金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification based
on tested welding consumables
ISO 15611-2003 金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification based
on previous welding experience
ISO 15612-2004 金属材料的焊接程序规范和鉴定.通过标准焊接程序的采用进行合格鉴定
Specification and qualification of welding procedures
for metallic materials - Qualification by adoption
of a standard welding procedure
ISO 15613-2004 金属材料的焊接程序规范和鉴定.基于预生产焊接试验的鉴定 Specification
and qualification of welding procedures for
metallic materials - Qualification based on
pre-production welding test
ISO 15614-1 AMD 1-2008 金属材料焊接工艺的规范和鉴定.焊接工艺试验.第1部分:钢的弧焊和气焊以及镍和镍合金的弧焊.修改件1
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 1: Arc and gas welding of steels and
arc welding of nickel and nickel alloys; Amendment
1
ISO 15614-1 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第1部分:钢的电弧焊接和气焊以及镍和镍合金的电弧焊接.技术勘
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 1: Arc and gas welding of steels and
arc welding of nickel and nickel alloys; Technical
Corrigendum 1
ISO 15614-1-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的电弧焊和气焊及镍和镍合金的电弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 1: Arc and gas welding of steels and
arc welding of nickel and nickel alloys
ISO 15614-10-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第10部分:高压干焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 10: Hyperbaric dry welding
ISO 15614-11-2002 金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 11: Electron and laser beam welding
ISO 15614-12-2004 金属材料焊接程序的规范和鉴定.焊接过程试验.第12部分:点焊、缝焊和凸焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 12: Spot, seam and projection welding
ISO 15614-13-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第13部分:电阻对接焊和电弧对接焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 13: Resistance butt and flash welding
ISO 15614-2 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第2部分:铝及其合金的电弧焊接.技术勘误1
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 2: Arc welding of aluminium and its alloys;
Technical Corrigendum 1
ISO 15614-2 Technical Corrigendum 2-2009 金属材料焊接程序的规范和鉴定.焊接程序试验.第2部分:铝及其合金的电弧焊接.修改件2
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 2: Arc welding of aluminium and its alloys;
Amendment 2
ISO 15614-2-2005 金属材料焊接程序的规范和鉴定.焊接过程试验.第2部分:铝和铝合金电弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 2: Arc welding of aluminium and its alloys
ISO 15614-3-2008 金属材料的焊接程序规范和合格鉴定.焊接程序试验.第3部分:非合金和低合金铸铁的熔焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 3: Fusion welding of non-alloyed and
low-alloyed cast irons
ISO 15614-4 Technical Corrigendum 1-2007 金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接.技术勘误1
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 4: Finishing welding of aluminium castings;
Technical Corrigendum 1
ISO 15614-4-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 4: Finishing welding of aluminium castings
ISO 15614-5-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 5: Arc welding of titanium, zirconium
and their alloys
ISO 15614-6-2006 金属材料焊接程序的规范和鉴定.焊接程序试验.第6部分:铜及其合金的电弧焊接和气焊
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 6: Arc and gas welding of copper and
its alloys
ISO 15614-7-2007 金属材料焊接程序规范和鉴定.焊接程序试验.第7部分:覆盖焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 7: Overlay welding
ISO 15614-8-2002 金属材料焊接程序的规范和鉴定.焊接程序试验.第8部分:管对管板接头焊接
Specification and qualification of welding procedures
for metallic materials - Welding procedure test
- Part 8: Welding of tubes to tube-plate joints
ISO 15615-2002 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求
Gas welding equipment - Acetylene manifold systems
for welding, cutting and allied processes -
Safety requirements in high-pressure devices
ISO 15616-1-2003 高质量焊接和切割用CO2激光射线机的验收试验.第1部分:通用原理和验收条件
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 1: General principles, acceptance conditions
ISO 15616-2-2003 高质量焊接和切割用CO2激光射线机的验收试验.第2部分:静态和动态准确度的测定
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 2: Measurement of static and dynamic
accuracy
ISO 15616-3-2003 高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正
Acceptance tests for CO<(Index)2>-laser
beam machines for high quality welding and cutting
- Part 3: Calibration of instruments for measurement
of gas flow and pressure
ISO 15616-4-2008 高质量焊接和切割用CO2激光光束机的验收试验.第4部分:带二维移动光学的机械
Acceptance tests for CO-laser beammachines for
high quality welding andcutting —Part 4:Machines
with 2-D moving optics
ISO 15618-1-2001 从事水下焊接的焊接员资格检验 第1部分：高压湿焊的潜水焊接员
Qualification testing of welders for underwater
welding - Part 1: Diver-welders for hyperbaric
wet welding
ISO 15618-2-2001 从事水下焊接的焊接员资格检验 第2部分：高压干焊的潜水焊接员和焊接操作员
Qualification testing of welders for underwater
welding - Part 2: Diver-welders and welding
operators for hyperbaric dry welding
ISO 15620-2000 焊接 金属材料的摩擦焊接 Welding - Friction
welding of metallic materials
ISO 15630-2-2002 混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维
Steel for the reinforcement and prestressing
of concrete - Test methods - Part 2: Welded
fabric
ISO 15792-1-2000 焊接耗材 试验方法 第1部分:钢、镍和镍合金全焊金属试样的试验方法
Welding consumables - Test methods - Part 1:
Test methods for all-weld metal test specimens
in steel, nickel and nickel alloys
ISO 15792-2-2000 焊接耗材 试验方法 第2部分:钢单道焊和双道焊技术试样的制备
Welding consumables - Test methods - Part 2:
Preparation of single-run and two-run technique
test specimens in steel
ISO 15792-3 Technical Corrigendum 1-2006 焊接耗材.试验方法.第3部分:角焊中焊接耗材的根角熔深和填位能力的分类试验
Welding consumables - Test methods - Part 3:
Classification testing of positional capacity
and root penetration of welding consumables
in a fillet weld; Technical Corrigendum 1
ISO 15792-3-2000 焊接耗材 试验方法 第3部分:角焊中焊接消耗品的根角熔深和填位能力的分类试验
Welding consumables - Test methods - Part 3:
Classification testing of positional capacity
and root penetration of welding consumables
in a fillet weld
ISO 16834-2006 焊接消耗品.高强度钢的气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类
Welding consumables - Wire electrodes, wires,
rods and deposits for gas-shielded arc welding
of high strength steels - Classification
ISO 17632-2004 焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类
Welding consumables - Tubular cored electrodes
for gas shielded and non-gas shielded metal
arc welding of non-alloy and fine grain steels
- Classification
ISO 17633-2004 焊接消耗品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Welding consumables - Tubular cored electrodes
and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting
steels - Classification
ISO 17634-2004 焊接消耗品.耐蠕变钢的气体保护金属电弧焊用管状有芯焊条.分类
Welding consumables - Tubular cored electrodes
for gas shielded metal arc welding of creep-resisting
steels - Classification
ISO 17636-2003 焊缝的无损检验.熔焊接头的放射检验 Non-destructive
testing of welds - Radiographic testing of fusion-welded
joints
ISO 17637-2003 焊缝的无损检验.熔焊接头的外观检验 Non-destructive
testing of welds - Visual testing of fusion-welded
joints
ISO 17640-2005 焊接的无损检验.焊接接头的超声波检验 Non-destructive
testing of welds - Ultrasonic testing of welded
joints
ISO 17641-1-2004 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第1部分:总则
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - Part 1: General
ISO 17641-2-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第2部分:自束试验
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - Part 2: Self-restraint tests
ISO 17642-1-2004 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第1部分:总则
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Part 1: General
ISO 17642-2-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第2部分:自束试验
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Part 2: Self-restraint tests
ISO 17642-3-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第3部分:外部载荷试验
Destructive tests on welds in metallic materials
- Cold cracking tests for weldments - Arc welding
processes - Part 3: Externally loaded tests
ISO 17643-2005 焊接的无损检验.用矢量分析的焊接涡流检验 Non-destructive
testing of welds - Eddy current testing of welds
by complex-plane analysis
ISO 17652-1-2003 焊接.与焊接和相关工艺有关的工厂底漆的试验.第1部分:一般要求
Welding - Test for shop primers in relation
to welding and allied processes - Part 1: General
requirements
ISO 17652-2-2003 焊接.与焊接和相关工艺有关的工厂底漆的试验.第2部分:工厂底漆的焊接特性
Welding - Test for shop primers in relation
to welding and allied processes - Part 2: Welding
properties of shop primers
ISO 17652-3-2003 焊接.与焊接和相关工艺有关的工厂底漆的试验.第3部分:热切割
Welding - Test for shop primers in relation
to welding and allied processes - Part 3: Thermal
cutting
ISO 17652-4-2003 焊接.与焊接和相关工艺有关的工厂底漆的试验.第4部分:烟气排放
Welding - Test for shop primers in relation
to welding and allied processes - Part 4: Emission
of fumes and gases
ISO 17654-2003 金属材料焊接的破坏检验.电阻焊接.电阻缝焊的压力试验 Destructive
tests on welds in metallic materials - Resistance
welding - Pressure test on resistance seam welds
ISO 17655-2003 金属材料焊接的有损试验.测量δ铁素体用的取样方法 Destructive
tests on welds in metallic materials - Method
for taking samples for delta ferrite measurement
ISO 17657-1-2005 电阻焊.电阻焊用焊接电流测量.第1部分:测量指南 Resistance
welding - Welding current measurement for resistance
welding - Part 1: Guidelines for measurement
ISO 17657-2-2005 电阻焊.电阻焊用焊接电流测量.第2部分:电流感应线圈式焊接电流计
Resistance welding - Welding current measurement
for resistance welding - Part 2: Welding current
meter with current sensing coil
ISO 17657-3-2005 电阻焊.电阻焊用焊接电流测量.第3部分:电流感应线圈
Resistance welding - Welding current measurement
for resistance welding - Part 3: Current sensing
coil
ISO 17657-4-2005 电阻焊.电阻焊用焊接电流测量.第4部分:校验系统 Resistance
welding - Welding current measurement for resistance
welding - Part 4: Calibration system
ISO 17657-5-2005 电阻焊.电阻焊用焊接电流测量.第5部分:焊接电流测量系统的验证
Resistance welding - Welding current measurement
for resistance welding - Part 5: Verification
of welding current measuring system
ISO 17658-2002 焊接.氧气火焰切割、激光束切割和等离子体切割的缺陷 Welding
- Imperfections in oxyfuel flame cuts, laser
beam cuts and plasma cuts - Terminology
ISO 17659-2002 焊接.图示焊接接头的多语种术语 Welding - Multilingual
terms for welded joints with illustrations
ISO 17660-1-2006 焊接.钢筋焊接.第1部分:承载焊接接缝 Welding
- Welding of reinforcing steel - Part 1: Load-bearing
welded joints
ISO 17660-2-2006 焊接.钢筋焊接.第2部分:非承载焊接接缝 Welding
- Welding of reinforcing steel - Part 2: Non
load-bearing welded joints
ISO 17662-2005 焊接.焊接用设备的校正、验证和确认(包括辅助活动) Welding
- Calibration, verification and validation of
equipment used for welding, including ancillary
activities
ISO 17663-2009 焊接.焊接及相关工艺的热处理质量要求 Welding -
Quality requirements for heat treatment in connection
with welding and allied processes
ISO 17846-2004 焊接及相关工艺.健康和安全.电弧焊接和切割用设备和消耗品的无字预警标签
Welding and allied processes - Health and safety
- Wordless precautionary labels for equipment
and consumables used in arc welding and cutting
ISO 18172-1-2007 储气瓶.可再灌装的焊接不锈钢气瓶.第1部分:试验压力≤6MPa
Gas cylinders - Refillable welded stainless
steel cylinders - Part 1: Test pressure 6 MPa
and below
ISO 18172-2-2007 储气瓶.可再灌装的焊接不锈钢气瓶.第2部分:试验压力大于6MPa
Gas cylinders - Refillable welded stainless
steel cylinders - Part 2: Test pressure greater
than 6 MPa
ISO 18207-2006 道路车辆.3.5吨拖车.控制疲劳试验后联轴球焊接牵引支架
Road vehicles - Trailers up to 3,5 t - Control
of welded towing brackets for coupling ball
after fatigue testing
ISO 18273-2004 焊接消耗品.铝和铝合金焊接用焊丝电极、金属丝和棒材.分类
Welding consumables - Wire electrodes, wires
and rods for welding of aluminium and aluminium
alloys - Classification
ISO 18274 Technical Corrigendum 1-2005 焊接消耗品.镍和镍合金熔焊用焊丝和条式电极、焊线和焊条.分类.技术勘误1
Welding consumables - Wire and strip electrodes,
wires and rods for fusion welding of nickel
and nickel alloys - Classification; Technical
Corrigendum 1
ISO 18274 Technical Corrigendum 2-2006 焊接耗材.镍及镍合金熔焊用丝状和带状电极、焊丝和焊条.分类.技术勘误2
Welding consumables - Wire and strip electrodes,
wires and rods for fusion welding of nickel
and nickel alloys - Classification; Technical
Corrigendum 2
ISO 18274-2004 焊接消耗品.镍和镍合金电弧焊用焊丝和条式电极、金属线和棒材.分类
Welding consumables - Wire and strip electrodes,
wires and rods for arc welding of nickel and
nickel alloys - Classification
ISO 18275 Technical Corrigendum 1-2007 焊接耗材.高强度钢的手工金属电弧焊用涂覆电焊条.分类.技术勘误1
Welding consumables - Covered electrodes for
manual metal arc welding of high-strength steels
- Classification; Technical Corrigendum 1
ISO 18275-2005 焊接消耗品.高强度钢的手工金属极电弧焊用涂覆电焊条.分类
Welding consumables - Covered electrodes for
manual metal arc welding of high-strength steels
- Classification
ISO 18276-2005 焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类
Welding consumables - Tubular cored electrodes
for gas-shielded and non-gas-shielded metal
arc welding of high-strength steels - Classification
ISO 18279-2003 钎焊.钎焊接头的缺陷 Brazing - Imperfections
in brazed joints
ISO 18592-2009 电阻焊接.焊点破坏性试验.多点焊接样品的疲劳试验方法 Resistance
welding - Destructive testing of welds - Method
for the fatigue testing of multi-spot-welded
specimens
ISO 18594-2007 电阻点焊接、电阻凸焊和电阻缝隙焊接.测定铝和钢材料的跃迁电阻
Resistance spot-, projection- and seam-welding
- Method for determining the transition resistance
on aluminium and steel material
ISO 18595-2007 电阻焊接.铝和铝合金的点焊.可焊接性、焊接和测试 Resistance
welding - Spot welding of aluminium and aluminium
alloys - Weldability, welding and testing
ISO 2016-1981 铜管用毛细管焊接接头 组装尺寸和试验方法 Capillary
solder fittings for copper tubes; Assembly dimensions
and tests
ISO 20703-2006 气瓶.可再充装的焊接铝合金气瓶.设计、结构和试验 Gas
cylinders - Refillable welded aluminium-alloy
cylinders - Design, construction and testing
ISO 21670-2003 带法兰的六角焊接螺母 Hexagon weld nuts
with flange
ISO 21952-2007 焊接消耗品.抗蠕变钢的气体保护电弧焊用丝状电极、焊丝、焊条和沉渍物.
分类 Welding consumables - Wire electrodes, wires,
rods and deposits for gas-shielded arc welding
of creep-resisting steels - Classification
ISO 22826-2005 金属材料焊缝的破坏性试验.激光和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验)
Destructive tests on welds in metallic materials
- Hardness testing of narrow joints welded by
laser and electron beam (Vickers and Knoop hardness
tests)
ISO 22827-1-2005 Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第1部分:激光装配
Acceptance tests for Nd:YAG laser beam welding
machines - Machines with optical fibre delivery
- Part 1: Laser assembly
ISO 22827-2-2005 Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第2部分:移动装置
Acceptance tests for Nd:YAG laser beam welding
machines - Machines with optical fibre delivery
- Part 2: Moving mechanism
ISO 22829-2007 电阻焊接.带组合变压器焊接枪用变压器整流器.1000 Hz频率工作变压器整流器
Resistance welding - Transformer-rectifier for
welding guns with integrated transformers -
Transformer-rectifier units operating at 1000
Hz frequency
ISO 22991-2004 储气瓶.液化石油气用可运输的可再填充焊接钢瓶.设计和建造
Gas cylinders - Transportable refillable welded
steel cylinders for liquefied petroleum gas
(LPG) - Design and construction
ISO 23278-2006 焊接无损测试.焊接的磁性颗粒测试.验收水平 Non-destructive
testing of welds - Magnetic particle testing
of welds - Acceptance levels
ISO 24034 AMD 1-2008 焊接消耗品.钛和钛合金的熔焊用实心焊丝和焊条.分类.修改件1
Welding consumables - Solid wires and rods for
fusion welding of titanium and titanium alloys
- Classification; Amendment 1
ISO 24034-2005 焊接耗材.钛和钛合金的熔焊用焊丝和焊条.分类 Welding
consumables - Solid wires and rods for fusion
welding of titanium and titanium alloys - Classification
ISO 242-1975 硬质合金焊接车刀片 Carbide tips for brazing
on turning tools
ISO 24373-2008 焊接消耗品.铜和铜合金的熔焊用固体焊丝和焊杆.分类 Welding
consumables - Solid wires and rods for fusion
welding of copper and copper alloys - Classification
ISO 24394-2008 航空航天设施焊接.焊接工和焊接操作工用鉴定试验.金属部件的熔焊
Welding for aerospace applications - Qualification
test for welders and welding operators - Fusion
welding of metallic components
ISO 24497-3-2007 无损检验.金属存储器.第3部分:焊接接口检验 Non-destructive
testing - Metal magnetic memory - Part 3: Inspection
of welded joints
ISO 24598-2007 焊接耗材.抗蠕变钢的潜弧焊用实心焊丝、管状芯焊条和焊条/焊剂组合制品.分类
Welding consumables - Solid wire electrodes,
tubular cored electrodes and electrode/flux
combinations for submerged arc welding of creep-resisting
steels - Classification
ISO 2503-2009 气焊设备.用于压力在300 bar(30兆帕)以下的焊接,切割及相关工艺的调压器和配备气瓶用流量计量装置的调压器
Gas welding equipment - Pressure regulators
and pressure regulators with flow-metering devices
for gas cylinders used in welding, cutting and
allied processes up to 300 bar (30 MPa)
ISO 2553-1992 焊接、硬钎焊和软钎焊接头 图样上的符号表示法 Welded,
brazed and soldered joints; symbolic representation
on drawings
ISO 2560-2009 焊接材料.非合金钢和细晶粒钢的手工金属电弧焊用涂敷焊条.分类
Welding consumables - Covered electrodes for
manual metal arc welding of non-alloy and fine
grain steels - Classification
ISO 26304 Technical Corrigendum 1-2009 焊接消耗品.高强度钢潜弧焊接用实心焊条、管芯焊条和焊条熔接组合件.分类.技术勘误1
Welding consumables - Solid wire electrodes,
tubular cored electrodes and electrode-flux
combinations for submerged arc welding of high
strength steels - Classification; Technical
Corrigendum 1
ISO 26304-2008 焊接消耗品.高强度钢的潜弧焊用实心焊条、管状芯焊条和焊条-焊剂熔接物.分类
Welding consumables - Solid wire electrodes,
tubular cored electrodes and electrode-flux
combinations for submerged arc welding of high
strength steels - Classification
ISO 28319-2010 牙科.激光焊接 Dentistry - Laser welding
ISO 3253-1998 气焊设备 焊接、切割和有关工艺设备的软管接头 Gas welding
equipment - Hose connections for equipment for
welding, cutting and allied processes
ISO 3305-1985 光端焊接精密钢管 交货技术条件 Plain end welded
precision steel tubes; Technical conditions
for delivery
ISO 3580-2010 焊接消耗品.抗蠕变钢手工电弧焊接用涂敷焊条.分类 Welding
consumables - Covered electrodes for manual
metal arc welding of creep-resisting steels
- Classification
ISO 3581 Technical Corrigendum 1-2008 焊接消耗品.不锈钢和耐热钢的手工金属电弧焊接用涂剂焊条.分类.技术勘误1
Welding consumables - Covered electrodes for
manual metal arc welding of stainless and heat-resisting
steels - Classification; Technical Corrigendum
1
ISO 3581-2003 焊料.不锈钢和耐热钢的手工金属电弧焊接用涂剂焊条.分类 Welding
consumables - Covered electrodes for manual
metal arc welding of stainless and heat-resisting
steels - Classification
ISO 3677-1992 软钎焊、硬钎焊和钎接焊接用填充金属 符号规定 Filler
metal for soft soldering, brazing and braze
welding; designation
ISO 3690-2000 焊接 碳钢和低合金钢手工焊熔敷金属扩散氢的测定 Welding
and allied processes - Determination of hydrogen
content in ferritic steel arc weld metal
ISO 3821-2008 气焊设备.焊接,切割和相关工艺用橡胶软管 Gas welding
equipment - Rubber hoses for welding, cutting
and allied processes
ISO 3913 ADD 1-1980 造船 钢质焊接带缆桩 补充1:内河航行用双缆桩
Shipbuilding; welded steel bollards; addendum
1
ISO 3913-1977 造船 钢质焊接带缆桩 Shipbuilding; Welded
steel bollards
ISO 4019-2001 结构钢 冷成型、焊接、结构中空截面 尺寸和截面特性 Structural
steels - Cold-formed, welded, structural hollow
sections - Dimensions and sectional properties
ISO 4063-2009 焊接及相关工艺过程.工艺过程名称和参考号 Welding and
allied processes - Nomenclature of processes
and reference numbers
ISO 4136-2001 金属材料焊接的破坏性试验 横向拉申试验 Destructive
tests of welds in metallic materials - Traverse
tensile test
ISO 4200-1991 光端焊接和无缝钢管 管的尺寸和单位长度重量的一览表 Plain
end steel tubes, welded and seamless; general
tables of dimensions and masses per unit length
ISO 4706-1-2008 气瓶.可重复充装的钢制焊接气瓶.第1部分:试验压力≤60bar
Gas cylinders - Refillable welded steel cylinders
- Part 1: Test pressure 60 bar and below
ISO 4706-2008 气瓶.可再填充焊接钢瓶.第1部分:试验压力小于等于60ba
Gas cylinders - Refillable welded steel cylinders
- Part 1: Test pressure 60 bar and below
ISO 4778-1981 焊接吊链 M(4)、S(6)和T(8)级 Chain slings
of welded construction; Grades M (4), S (6)
and T (8)
ISO 4850-1979 焊接和相关工艺的专用护目镜、滤光镜 应用和透射率的要求 Personal
eye-protectors for welding and related techniques;
Filters; Utilisation and transmittance requirements
ISO 4978-1983 焊接气瓶用轧制扁钢制品 Flat rolled steel
products for welded gas cylinders
ISO 5171-2009 气体焊接设备.焊接,切割和相关工艺过程中使用的压力仪表 Gas
welding equipment - Pressure gauges used in
welding, cutting and allied processes
ISO 5178-2001 金属材料焊接的破坏性试验 熔焊接头的焊接金属的纵向拉申试验
Destructive tests on welds in metallic materials
- Longitudinal tensile test on weld metal in
fusion welded joints
ISO 5182-2008 电阻焊接.电极和辅助设备用材料 Resistance welding
- Materials for electrodes and ancillary equipment
ISO 5187-1985 焊接和相关工艺 用软钎焊和硬钎焊接头 力学试验方法 Welding
and allied processes; Assemblies made with soft
solders and brazing filler metals; Mechanical
test methods
ISO 544-2003 焊接消耗品.焊接填充料的技术交货条件.产品类型、尺寸、公差和标记
Welding consumables - Technical delivery conditions
for welding filler materials - Type of product,
dimensions, tolerances and markings
ISO 5625-1978 造船 钢管管路法兰焊接通舱管 PN6、PN10和PN16 Shipbuilding;
Welded bulkhead pieces with flanges for steel
pipework; PN 6, PN 10 and PN 16
ISO 5817 Technical Corrigendum 1-2006 焊接.钢、镍、钛及其合金的熔焊接缝(束焊除外).缺陷的质量等级.技术勘误1
Welding - Fusion-welded joints in steel, nickel,
titanium and their alloys (beam welding excluded)
- Quality levels for imperfections; Technical
Corrigendum 1
ISO 5817-2003 焊接.钢、镍、钛及其合金熔焊接头(束焊除外).缺陷的质量分级
Welding - Fusion-welded joints in steel, nickel,
titanium and their alloys (beam welding excluded)
- Quality levels for imperfections
ISO 5821-2009 电阻焊接.点焊电极帽接头 Resistance welding
- Spot welding electrode caps
ISO 636-2004 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类
Welding consumables - Rods, wires and deposits
for tungsten inert gas welding of non-alloy
and fine-grain steels - Classification
ISO 6520-1-2007 焊接和相关工艺.金属材料中几何缺陷的分类.第1部分:熔焊
Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Part 1: Fusion welding
ISO 6520-2-2001 焊接及相关工艺 金属材料的几何缺陷的分类 第2部分：压焊
Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Part 2: Welding with pressure
ISO 669-2000 电阻焊接 电阻焊设备 机械和电要求 Resistance welding
- Resistance welding equipment - Mechanical
and electrical requirements
ISO 6758-1980 热交换器用焊接钢管 Welded steel tubes for
heat exchangers
ISO 6761-1981 钢管 焊接用管端和配件的预处理 Steel tubes; Preparation
of ends of tubes and fittings for welding
ISO 6847-2000 焊接耗材 化学分析用焊接金属的熔敷 Welding consumables
- Deposition of a weld metal pad for chemical
analysis
ISO 6935-3 Technical Corrigendum 1-2000 钢筋混凝土用钢
第3部分:焊接钢筋网 技术勘误1 Steel for the reinforcement
of concrete - Part 3: Welded fabric; Technical
Corrigendum 1
ISO 6935-3-1992 钢筋混凝土用钢 第3部分:焊接钢筋网 Steel for
the reinforcement of concrete; part 3: welded
fabric
ISO 6947-1990 焊接 工作位置 倾角和转角的定义(ISO 6947-1980的修订本)
Welds; working positions; definitions of angles
of slope and rotation (revision of ISO 6947:1980)
ISO 6971-2002 焊接结构拉曳用弯板链、附件和链轮 Cranked-link
drag chains of welded construction, attachments
and sprockets
ISO 6972-2002 焊接结构工程用弯板链、附件和链轮 Cranked-link
mill chains of welded construction, attachments
and sprockets
ISO 7286-1986 电阻焊接设备的图形符号 两种语言版 Graphical symbols
for resistance welding equipment Bilingual edition
ISO 7289-2010 气焊设备.焊接、切割及相关工艺用带关闭阀的快速接头 Gas
welding equipment - Quick-action couplings with
shut-off valves for welding, cutting and allied
processes
ISO 7291-1999 气焊设备 用于300 bar以下的焊接、切割及相关工艺用汇流系统上的压力调节器
Gas welding equipment - Pressure regulators
for manifold systems used in welding, cutting
and allied processes up to 300 bar
ISO 7593-1986 非焊接吊链 T(8)级 Chain slings assembled
by methods other than welding; Grade T(8)
ISO 8205-1-2002 电阻焊接水冷次级线圈连接电缆.第1部分:双导体连接电缆的尺寸和要求
Water-cooled secondary connection cables for
resistance welding - Part 1: Dimensions and
requirements for double-conductor connection
cables
ISO 8205-2-2002 电阻焊接水冷次级线圈连接电缆.第2部分:单根导线连接电缆的尺寸和要求
Water-cooled secondary connection cables for
resistance welding - Part 2: Dimensions and
requirements for single-conductor connection
cables
ISO 8205-3-1993 电阻焊接水冷次级线圈连接电缆 第3部分:试验要求 Water-cooled
secondary connection cables for resistance welding;
part 3: test requirements
ISO 8207-1996 气焊设备 焊接、切割和相关工艺设备用软管组件规范 Gas welding
equipment - Specification for hose assemblies
for equipment for welding, cutting and allied
processes
ISO 8249-2000 焊接 奥氏体和成双铁素体奥氏体镍-铬(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals
ISO 8501-3-2006 涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Part 3: Preparation
grades of welds, edges and other areas with
surface imperfections
ISO 857-1-1998 焊接和相关工艺 术语 第1部分:金属焊接工艺 两种语言版
Welding and allied processes - Vocabulary -
Part 1: Metal welding processes
ISO 857-2-2005 焊接和相关工艺.词汇.第2部分:软钎焊和铜焊工艺及相关术语
Welding and allied processes - Vocabulary -
Part 2: Soldering and brazing processes and
related terms
ISO 9015-1-2001 金属材料焊接的破坏性试验 硬度试验 第1部分：弧焊接头的硬度试验
Destructive tests on welds in metallic materials
- Hardness testing - Part 1: Hardness test on
arc welded joints
ISO 9015-2-2003 金属材料焊接的破坏性试验.硬度试验.第2部分:焊接件的显微硬度试验
Destructive tests on welds in metallic materials
- Hardness testing - Part 2: Microhardness testing
of welded joints
ISO 9016-2001 金属材料焊接的破坏性试验 碰撞试验 试验样品的位置、切口的朝向和检查
Destructive tests on welds in metallic materials
- Impact tests - Test specimen location, notch
orientation and examination
ISO 9017-2001 金属材料焊接的破坏性试验 断裂试验 Destructive
tests on welds in metallic materials - Fracture
test
ISO 9018-2003 金属材料焊接的破坏性试验.十字形接缝和搭接缝的抗拉试验 Destructive
tests on welds in metallic materials - Tensile
test on cruciform and lapped joints
ISO 9302-1994 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 液压密封验证电磁试验法
Seamless and welded (except submerged arc-welded)
steel tubes for pressure purposes; electromagnetic
testing for verification of hydraulic leak-tightness
ISO 9303-1989 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用全周边超声波试验
Seamless and welded (except submerged arc-welded)
steel tubes for pressure purposes; full peripheral
ultrasonic testing for the detection of longitudinal
imperfections
ISO 9304-1989 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测缺陷用涡流电流试验
Seamless and welded (except submerged arc-welded)
steel tubes for pressure purposes; eddy current
testing for the detection of imperfections
ISO 9327-4-1999 压力用途的钢锻件和轧制或锻造的棒材 交货技术条件 第4部分:高强度可焊接细粒钢
Steel forgings and rolled or forged bars for
pressure purposes - Technical delivery conditions
- Part 4: Weldable fine grain steels with high
proof strength
ISO 9328-6-2004 压力用途扁钢产品.交货技术条件.第6部分:淬火和回火的可焊接细粒钢
Steel flat products for pressure purposes -
Technical delivery conditions - Part 6: Weldable
fine grain steels, quenched and tempered
ISO 9330-1-1990 压力用途的焊接钢管 交货技术条件 第1部分:规定室温性能的非合金钢管
Welded steel tubes for pressure purposes; technical
delivery conditions; part 1: unalloyed steel
tubes with specified room temperatures properties
ISO 9330-2-1997 压力用途的焊接钢管 交货技术条件 第2部分:规定高温性能的电阻焊接和感应焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 2: Electric resistance
and induction welded unalloyed and alloyed steel
tubes with specified elevated temperature properties
ISO 9330-3-1997 压力用途的焊接钢管 交货技术条件 第3部分:规定低温性能的电阻焊接和感应焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 3: Electric resistance
and induction welded unalloyed and alloyed steel
tubes with specified low temperature properties
ISO 9330-4-2000 压力用途的焊接钢管 交货技术条件 第4部分:规定高温性能的埋弧焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 4: Submerged arc-welded
unalloyed and alloyed steel tubes with specified
elevated temperature properties
ISO 9330-5-2000 压力用途的焊接钢管 交货技术条件 第5部分:规定低温性能的埋弧焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 5: Submerged arc-welded
unalloyed and alloyed steel tubes with specified
low temperature properties
ISO 9330-6-1997 压力用途的焊接钢管 交货技术条件 第6部分:奥氏体不锈钢管的焊接长度
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 6: Longitudinally
welded austenitic stainless steel tubes
ISO 9402-1989 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用铁磁钢管全周边磁转换/磁链试验
Seamless and welded (except submerged arc-welded)
steel tubes for pressure purposes; full peripheral
magnetic transducer/flux leakage testing of
ferromagnetic steel tubes for the detection
of longitudinal imperfections
ISO 9539-2010 气焊设备.用于气体焊接、切割和相关工艺过程设备的材料 Gas
welding equipment - Materials for equipment
used in gas welding, cutting and allied processes
ISO 9692-1-2003 焊接和相关工艺.关于接缝准备的建议.第1部分:钢的手动金属电弧焊接、气体保护金属电弧焊、气焊、TIG焊接和
Welding and allied processes - Recommendations
for joint preparation - Part 1: Manual metal-arc
welding, gas-shielded metal-arc welding, gas
welding, TIG welding and beam welding of steels
ISO 9692-2-1998 焊接和相关工艺 接头的制备 第2部分:钢的埋弧焊 Welding
and allied processes - Joint preparation - Part
2: Submerged arc welding of steels
ISO 9692-3-2000 焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊
Welding and allied processes - Recommendations
for joint preparation - Part 3: Metal inert
gas welding and tungsten inert gas welding of
aluminium and its alloys
ISO 9692-4-2003 焊接和相关工艺.接头制备的建议.第4部分:包钢 Welding
and allied processes - Recommendations for joint
preparation - Part 4: Clad steels
ISO/TR 13393-2009 焊接消耗品.硬表面堆焊.微观结构 Welding consumables
- Hardfacing classification - Microstructures
ISO/TR 15608-2005 焊接.金属材料分类体系指南 Welding - Guidelines
for a metallic materials grouping system
ISO/TR 17641-3-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第3部分:外部负载试验
Destructive tests on welds in metallic materials
- Hot cracking tests for weldments - Arc welding
processes - Part 3: Externally loaded tests
ISO/TR 17671-1-2002 焊接.金属材料焊接的推荐.第1部分:电弧焊接通用指南
Welding - Recommendations for welding of metallic
materials - Part 1: General guidance for arc
welding
ISO/TR 17671-2-2002 焊接.金属材料焊接的推荐.第2部分:铁素体钢的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 2: Arc welding of ferritic
steels
ISO/TR 17671-3-2002 焊接.金属材料焊接的推荐.第3部分:不锈钢的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 3: Arc welding of stainless
steels
ISO/TR 17671-4-2002 焊接.金属材料焊接的推荐.第4部分:铝和铝合金的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 4: Arc welding of aluminium
and aluminium alloys
ISO/TR 17671-5-2004 焊接.金属材料焊接的推荐.第5部分:覆层钢的焊接
Welding - Recommendations for welding of metallic
materials - Part 5: Welding of clad steels
ISO/TR 17671-6-2005 焊接.金属材料焊接建议.第6部分:激光束焊接 Welding
- Recommendations for welding of metallic materials
- Part 6: Laser beam welding
ISO/TR 17671-7-2004 焊接.金属材料焊接的推荐.第7部分:电子束焊接
Welding - Recommendations for welding of metallic
materials - Part 7: Electron beam welding
ISO/TR 17844-2004 焊接.避免冷裂的标准化方法的比较 Welding -
Comparison of standardised methods for the avoidance
of cold cracks
ISO/TR 20172-2009 焊接材料分组系统.欧洲材料 Welding - Grouping
systems for materials - European materials
ISO/TR 20173-2009 焊接.材料分组系统.美国材料 Welding - Grouping
systems for materials - American materials
ISO/TR 20174-2005 焊接.材料分组系统.日本材料 Welding - Grouping
systems for materials - Japanese materials
ISO/TR 22824-2003 焊接消耗品.规范中预测的和实测的FN.IIW委员会IX专家的见解
Welding consumbales - Predicted and measured
FN in specifications - A position statement
of the experts of IIW Commission IX
ISO/TR 25901-2007 焊接和相关工艺.词汇 Welding and related
processes - Vocabulary
ISO/TR 8610-1984 薄壁金属容器 用于乳类及乳制品的两端经焊接的抽气圆罐
容量和相应直径 Light gauge metal containers; Round
vent-hole cans with soldered ends for milk and
milk products; Capacities and related diameters
ISO/TS 15011-5-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室法.第5部分:完全或部分有机材料组成的产品在焊接或切割
Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
- Part 5: Identification of thermal-degradation
products generated when welding or cutting through
products composed wholly or partly of organic
materials
ISO/TS 17845-2004 焊接及相关工艺.缺陷的名称与符号系统 Welding
and allied processes - Designation system for
imperfections
日本焊接标准(JIS welding standards)
--------------------------------------------------------------------------------
编号 中文名称
日本語標題 英文名称
JIS A1323-1995 建筑工程中焊接及气割火花对纤维板阻燃性的试验方法
建築工事用シートの溶接及び溶断火花に対する難燃性試験方法 Flame retardant
testing method for spark droplets of welding
and gas cutting on fabric sheets in construction
works
JIS A1323 AMD 1-2008 建筑工程中焊接及气割火花对纤维板阻燃性的测试方法
建築工事用シートの溶接及び溶断火花に対する難燃性試験方法（追補１） Flame retardant
testing method for spark droplets of welding
and gas cutting on fabric sheets in construction
works (Amendment 1)
JIS A5523-2006 可焊接热轧钢板桩
溶接用熱間圧延鋼矢板 Weldable hot rolled steel sheet piles
JIS B1195-2009 焊接螺栓
溶接ボルト Weld bolts
JIS B1196-2001 焊接螺母
溶接ナット Weld nuts
JIS B1200-2007 带法兰的六角焊接螺母
フランジ付き六角溶接ナット Hexagon weld nuts with flange
JIS B2316-2007 钢制套筒式焊接管配件
配管用鋼製差込み溶接式管継手 Steel socket-welding pipe fittings
JIS B2321-1995 铝及铝合金对焊接管接头
配管用アルミニウム及びアルミニウム合金製突合せ溶接式管継手 Aluminium and
aluminium alloy butt-welding pipe fittings
JIS B2321 AMD 1-2009 铝及铝合金对焊接管接头(修改件1)
配管用アルミニウム及びアルミニウム合金製突合せ溶接式管継手（追補１） Aluminium
and aluminium alloy butt-welding pipe fittings
(Amendment 1)
JIS B6801-2003 焊接、切割和加热用手动喷焊器
手動ガス溶接器，切断器及び加熱器 Manual blowpipes for welding,
cutting and heating
JIS B6803-2003 焊接、切割及相关工艺用压力调节器
溶断器用圧力調整器 Pressure regulator for welding, cutting
and allied processes
JIS B6805-2003 焊接、切割及相关工艺用设备的橡胶软管连接
溶断器用ゴムホース継手 Rubber hose connection for equipment
for welding, cutting and allied processes
JIS B7284-1997 眼镜架的焊接接头
眼鏡枠用溶接丁番 Welded joints for spectacle frames
JIS B8285-2003 压力容器的焊接程序合格鉴定试验
圧力容器の溶接施工方法の確認試験 Welding procedure qualification
test for pressure vessels
JIS B8366-6-2001 流体动力系统及元件.液压缸.元件和识别代码.第6部分:液压流体动力.单杆液压缸、16MPa和25MPa圆形缸盖、焊接
油圧?空気圧システム及び機器―シリンダ―構成要素及び識別記号―第６部：片ロッドシリンダ，１６ＭＰａ用及び２５ＭＰａ用丸カバー，フランジ溶接又はねじ込み形取付寸法―許容差
Fluid power systems and components -- Cylinder
-- Elements and identification code -- Part
6: Hydraulic fluid power -- Single rod cylinders,
16 MPa and 25 MPa round cover, welded or threaded
flange type mounting dimensions -- Tolerances
JIS B8367-1-2009 液压机传动.汽缸安装尺寸.第1部分:单杆,16MPa系列.焊接或螺纹法兰的圆盖型液压气缸(内径25
mm 至 500 mm)
油圧シリンダ取付寸法―第１部：片ロッド―１６ＭＰａシリーズ―丸カバー形―溶接フランジ式及びねじ込みフランジ式（内径２５ｍｍ～５００ｍｍ）
Hydraulic fluid power -- Mounting dimensions
for cylinders -- Part 1: Single rod, 16 MPa
series -- Round cover types with welded or threaded
flange (Bores from 25 mm to 500 mm)
JIS B8367-4-2008 液压汽缸的安装尺寸.第4部分:单杆.25MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径50mm～320mm)
油圧シリンダ取付寸法―第４部：片ロッド―２５ＭＰａシリーズ―丸カバー形―溶接又はねじ込みフランジ式（内径５０ｍｍから３２０ｍｍまで）
Mounting dimensions for hydraulic cylinders
-- Part 4 : Single rod -- 25 MPa series, round
cover types with welded or threaded flange (Bores
from 50 mm to 320 mm)
JIS B8501-1995 焊接的钢制石油贮罐
鋼製石油貯槽の構造（全溶接製） Welded steel tanks for oil storage
JIS B8511-1987 焊接铝及铝合金圆形筒仓的结构
アルミニウム製円筒形サイロの構造 Construction of welded aluminium
and aluminium alloy cylindrical silos
JIS C3404-2000 焊接电缆
溶接用ケーブル Welding cables
JIS C3663-6-2007 橡胶绝缘电缆.额定电压≤450/750V.第6部分:电弧焊接电极电缆
定格電圧４５０／７５０Ｖ以下のゴム絶縁ケーブル―第６部：アーク溶接電極ケーブル Rubber
insulated cables -- Rated voltages up to and
including 450/750V -- Part 6: Arc welding electrode
cables
JIS C60068-2-20-2010 环境试验.第2-20部分:试验.试验T:带导线装置的可焊接性和焊接热抵抗性的试验方法
環境試験方法―電気?電子―第２－２０部：試験―試験Ｔ―端子付部品のはんだ付け性及びはんだ耐熱性試験方法
Environmental testing -- Part 2-20: Tests --
Test T: Test methods for solderability and resistance
to soldering heat of devices with leads
JIS C60068-2-58-2006 环境试验.第2部分:试验.试验Td:表面安装元器件(SMD)用可焊性、耐金属化溶融和耐焊接热试验方法
環境試験方法―電気?電子―表面実装部品（ＳＭＤ）のはんだ付け性，電極の耐はんだ食われ性及びはんだ耐熱性試験方法
Environmental testing -- Part 2: Tests -- Test
Td: Test methods for solderability, resistance
to dissolution of metallization and to soldering
heat of surface mounting devices (SMD)
JIS C61191-1-2006 印刷电路板组件.第1部分:一般规范.使用表面安装和相关装配技术的焊接电气组件和电子组件的要求
プリント配線板実装―第１部：通則―表面実装及び関連する実装技術を用いた電気機器及び電子機器用はんだ付け実装要求事項
Printed board assemblies -- Part 1: Generic
specification -- Requirements for soldered electrical
and electronic assemblies using surface mount
and related assembly technologies
JIS C61191-2-2006 印刷电路板组件.第2部分:分规范.表面安装焊接组件的要求
プリント配線板実装―第２部：部門規格―表面実装はんだ付け要求事項 Printed board
assemblies -- Part 2: Sectional specification
-- Requirements for surface mount soldered assemblies
JIS C61191-3-2006 印刷电路板组件.第3部分:分规范.通孔安装焊接组件的要求
プリント配線板実装―第３部：部門規格―挿入実装はんだ付け要求事項 Printed board
assemblies -- Part 3: Sectional specification
-- Requirements for though-hole mount soldered
assemblies
JIS C61191-4-2006 印刷电路板组件.第4部分:分规范.端点焊接组件的要求
プリント配線板実装―第４部：部門規格―端子実装はんだ付け要求事項 Printed board
assemblies -- Part 4: Sectional specification
-- Requirements for terminal soldered assemblies
JIS C62137-1-1-2010 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-1部分:拉拔强度试验
表面実装技術―はんだ接合部耐久性試験方法―第１－１部：引きはがし強度試験方法 Surface
mounting technology -- Environmental and endurance
test methods for surface mount solder joint
-- Part 1-1: Pull strength test
JIS C62137-1-2-2010 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-2部分:剪切强度试验
表面実装技術―はんだ接合部耐久性試験方法―第１－２部：横押しせん断強度試験方法 Surface
mounting technology -- Environmental and endurance
test methods for surface mount solder joint
-- Part 1-2: Shear strength test
JIS C9300-6-2006 电弧焊接设备.第6部分:有限工作时间手动金属弧焊电源
アーク溶接装置―第６部：限定使用率被覆アーク溶接電源 Arc welding equipment
-- Part 6: Limited duty manual metal arc welding
power sources
JIS C9300-12-2008 电弧焊接设备.第12部分:电缆焊接用连接装置
アーク溶接装置―第１２部：溶接ケーブルジョイント Arc welding equipment
-- Part 12: Coupling devices for welding cables
JIS C9313-2005 搭接用电阻焊接机的控制设备
重ね抵抗溶接機用制御装置 Control equipments of resistance
welding machines for lap joint
JIS C9317-1995 便携式点焊机用焊接变压器
ポータブル?スポット溶接機用溶接変圧器 Welding transformers for
portable spot welding machines
JIS C9319-1991 电阻焊接机用晶闸管堆
抵抗溶接機用サイリスタスタック Thyristorstacks for resistance
welding machine
JIS C9321 AMD 1-2009 电容器放电式点焊接机(修改件1)
コンデンサ式スポット溶接機 Capacitor discharge type spot
welding machines (Amendment 1)
JIS C9325-2009 电阻焊接设备用电极力测量装置
抵抗溶接機用電極加圧力計 Electrode force measuring device
for resistance welding equipment
JIS E3601-1992 钢轨焊接
Rail bonds
JIS E3601 AMD 1-2006 钢轨焊接（修改件1）
レールボンド（追補１） Rail bonds (Amendment 1)
JIS E4047-2008 铁路车辆.车辆底架.焊接接头的设计方法
鉄道車両―旅客車用構体―溶接継手設計方法 Rolling stock -- Body frame
-- Design methods for welded joints
JIS E4048-2008 车辆.客车的车体结构.点焊接头的设计方法
鉄道車両―旅客車用構体―スポット溶接継手の設計方法 Rolling stock -- Body
structure for passenger cars -- Design method
for spot-welded joints
JIS F7806-1996 造船.船用280K和350K承口焊接管法兰
船の２８０Ｋ及び３５０Ｋ油圧配管用差込み溶接式フランジ Shipbuilding --
Ships' 280K and 350K socket welding pipe flanges
JIS F7810-1995 造船焊接.钢管用套筒型接头
船用鋼製溶接スリーブ式管継手 Shipbuilding -- Welding sleeve
type joints for steel pipe
JIS G3106-2008 焊接结构用轧制钢材
溶接構造用圧延鋼材 Rolled steels for welded structure
JIS G3114-2008 焊接结构用耐大气腐蚀热轧钢材
溶接構造用耐候性熱間圧延鋼材 Hot-rolled atmospheric corrosion
resisting steels for welded structure
JIS G3128-2009 焊接结构用高屈服点钢板材
溶接構造用高降伏点鋼板 High yield strength steel plates
for welded structure
JIS G3353-1990 一般结构用工字型轻型焊接钢材
一般構造用溶接軽量Ｈ形鋼 Welded light gauge H steels for
general structures
JIS G3468-2004 大口径焊接不锈钢管
配管用溶接大径ステンレス鋼管 Large diameter welded stainless
steel pipes
JIS G3551-2005 焊接钢丝和钢筋网
溶接金網及び鉄筋格子 Welded steel wire and bar fabrics
JIS G4316-1991 焊接用不锈钢丝
溶接用ステンレス鋼線材 Stainless steel wire rods for welding
JIS G5102-1991 焊接结构用钢铸件
溶接構造用鋳鋼品 Steel castings for welded structure
JIS G5201-1991 焊接结构用离心铸造钢管
溶接構造用遠心力鋳鋼管 Centrifugally cast steel pipes for
welded structure
JIS G7217-2003 光端焊接精密钢管.交货技术条件(ISO规范)
プレーンエンドの溶接精密鋼管 ― 技術的受渡条件（ＩＳＯ仕様） Plain end welded
precision steel tubes -- Technical conditions
for delivery (ISO specifications)
JIS G7223-2003 承压用焊接钢管.交货技术条件.第1部分:规定室温特性的非合金钢管(ISO规范)
圧力用溶接鋼管 ― 技術的受渡条件 ― 第１部：室温用炭素鋼管（ＩＳＯ仕様） Welded
steel tubes for pressure purposes -- Technical
delivery conditions -- Part 1: Unalloyed steel
tubes with specified room temperature properties
(ISO specifications)
JIS G7224-2003 承压用焊接钢管.交货技术条件.第2部分:规定高温特性的电阻焊接和感应焊接非合金钢管和合金钢管(ISO规范)
圧力用溶接鋼管 ― 技術的受渡条件 ― 第２部：高温用電気抵抗溶接炭素鋼管及び合金鋼管（ＩＳＯ仕様）
Welded steel tubes for pressure purposes --
Technical delivery conditions -- Part 2: Electric
resistance and induction welded unalloyed and
alloyed steel tubes with specified elevated
temperature properties (ISO specifications)
JIS G7225-2003 承压用焊接钢管.交货技术条件.第3部分:规定低温特性的电阻焊接和感应焊接非合金钢管和合金钢管(ISO规范)
圧力用溶接鋼管 ― 技術的受渡条件 ― 第３部：低温用電気抵抗溶接炭素鋼管及び合金鋼管（ＩＳＯ仕様）
Welded steel tubes for pressure purposes --
Technical delivery conditions -- Part 3: Electric
resistance and induction welded unalloyed and
alloyed steel tubes with specified low temperature
properties (ISO specifications)
JIS G7226-2003 承压用焊接钢管.交货技术条件.第6部分:纵向焊接的奥氏体不锈钢管(ISO规范)
圧力用溶接鋼管 ― 技術的受渡条件 ― 第６部：長手溶接オーステナイトステンレス鋼管（ＩＳＯ仕様）
Welded steel tubes for pressure purposes --
Technical delivery conditions -- Part 6: Longitudinally
welded austenitic stainless steel tubes (ISO
specifications)
JIS H0517-2004 钛焊接管的分压试验方法
チタン溶接管の差圧試験方法 Differential pressure testing
method of titanium welded tubes
JIS H3320-2006 铜和铜合金焊接管
銅及び銅合金の溶接管 Copper and copper alloy welded pipes
and tubes
JIS H4090-1990 铝和铝合金焊接管和管件
アルミニウム及びアルミニウム合金溶接管 Aluminium and aluminium
alloy welded pipes and tubes
JIS H4090 AMD 1-2006 铝及铝合金焊接管（修改件1）
アルミニウム及びアルミニウム合金溶接管（追補１） Aluminium and aluminium
alloy welded pipes and tubes (Amendment 1)
JIS H4635-2006 钛及钛合金管焊接管材
チタン及びチタン合金の溶接管 Titanium and titanium alloy welded
pipes
JIS K6333-1999 气焊设备.焊接、切割及相关工艺用橡胶软管
溶断用ゴムホース Gas welding equipment -- Rubber hoses
for welding, cutting and allied processes
JIS K6333 AMD 1-2001 气焊设备.焊接、切割和有关加工工艺用橡胶软管(修改件1)
溶断用ゴムホース（追補１） Gas welding equipment -- Rubber
hoses for welding, cutting and allied processes
(Amendment 1)
JIS T8113-1976 焊接者用的防护皮革手套
溶接用かわ製保護手袋 Protective leather gloves for welders
JIS T8142-2003 焊接用个人面部防护设备
溶接用保護面 Personal face protectors for welding
JIS W2018-1992 航空航天用接触点焊及滚焊的焊接工艺
航空宇宙用スポット溶接及びシーム溶接作業 Resistance spot and seam
welding process for aerospace use
JIS Z3001-1-2008 焊接和相关工艺.词汇.第1部分:总则
溶接用語―第１部：一般 Welding and allied processes --
Vocabulary -- Part 1: General
JIS Z3001-2-2008 焊接和相关工艺.词汇.第2部分:焊接工艺
溶接用語―第２部：溶接方法 Welding and allied processes --
Vocabulary -- Part 2: Welding processes
JIS Z3001-3-2008 焊接和相关工艺.词汇.第3部分:软钎焊
溶接用語―第２部：溶接方法 Welding and allied processes --
Vocabulary -- Part 3: Soldering and brazing
JIS Z3001-4-2008 焊接和相关工艺.词汇.第4部分:熔焊缺陷
溶接用語―第４部：融接不完全部 Welding and allied processes
-- Vocabulary -- Part 4: Imperfections in fusion
welding
JIS Z3011-2004 用斜角和旋转角定义的焊接位置
溶接姿勢－傾斜角及び回転角による定義 Welding position defined
by means of angles of slope and rotation
JIS Z3021-2010 焊接及类似工艺.符号表示
溶接記号 Welding and allied processes -- Symbolic
representation
JIS Z3040-1995 焊接程序的鉴定试验方法
溶接施工方法の確認試験方法 Method of qualification test for
welding procedure
JIS Z3043-1990 不锈复合钢焊接程序质量合格鉴定试验的方法
ステンレスクラッド鋼溶接施工方法の確認試験方法 Method of welding procedure
qualification test for stainless-clad steel
JIS Z3044-1991 镍及镍合金包覆钢焊接程序鉴定试验方法
ニッケル及びニッケル合金クラッド鋼溶接施工方法の確認試験方法 Method of welding
procedure qualification test for nickel and
nickel alloy clad steels
JIS Z3050-1995 管道焊接的无损检测方法
パイプライン溶接部の非破壊試験方法 Method of nondestructive examination
for weld of pipeline
JIS Z3062-2009 混凝土加固用异型钢筋气压焊接区超声波探伤方法和验收准则
鉄筋コンクリート用異形棒鋼ガス圧接部の超音波探傷試験方法及び判定基準 Method and
acceptance criteria of ultrasonic examination
for gas pressure welds of deformed steel bars
for concrete reinforcement
JIS Z3070-1998 铁素体钢焊接用自动超声波测试方法
鋼溶接部の超音波自動探傷方法 Methods for automatic ultrasonic
testing for welds of ferritic steel
JIS Z3082-1995 铝板T型焊接的超声波检测方法
アルミニウムのＴ形溶接部の超音波探傷試験方法 Methods of ultrasonic
examination for T type welds of aluminium plates
JIS Z3090-2005 熔焊接头的目测试验方法
溶融溶接継手の外観試験方法 Visual testing method of fusion-welded
joints
JIS Z3101-1990 焊接热影响区最大硬度的试验方法
溶接熱影響部の最高硬さ試験方法 Testing method of maximum hardness
in weld heat-affected zone
JIS Z3103-1987 熔焊接头重复拉伸疲劳试验方法
アーク溶接継手の片振り引張疲れ試験方法 Method of repeated tension
fatigue testing for fusion welded joints
JIS Z3104-1995 钢焊接接点的X射线照相检测方法
鋼溶接継手の放射線透過試験方法 Methods of radiographic examination
for welded joints in steel
JIS Z3105-2003 铝焊接缝射线照相的检验方法
アルミニウム溶接継手の放射線透過試験方法 Methods of radiographic
examination for welded joints in aluminium
JIS Z3106-2001 不锈钢焊接接点的放射线检验方法
ステンレス鋼溶接継手の放射線透過試験方法 Methods of radiographic
examination for welded joints in stainless steel
JIS Z3115-1973 焊接热影响区锥形硬度试验方法
溶接熱影響部のテーパかたさ試験方法 Method of taper hardness test
in weld heat-affected zone
JIS Z3120-2009 混凝土加固用钢筋气压焊接缝测试的方法及合格准则
鉄筋コンクリート用棒鋼ガス圧接継手の試験方法及び判定基準 Method and acceptance
of criteria of test for gas pressure welded
joint of steel bars for concrete reinforcement
JIS Z3122-1990 对接焊接头的弯曲试验方法
突合せ溶接継手の曲げ試験方法 Methods of bend test for butt
welded joint
JIS Z3128-1996 焊接接点冲击试验方法
溶接継手の衝撃試験方法 Method of impact test for welded
joint
JIS Z3129-2005 钢的单道和双道焊接技术用试样的试验方法和制备
鋼の１ラン及び２ラン溶接継手の作製方法及び試験方法 Test method and preparation
of test specimens for single-run and two-run
welding technique in steel
JIS Z3136-1999 剪切试验电阻点焊和压印凸焊焊接点的样品尺寸和程序
抵抗スポット及びプロジェクション溶接継手のせん断試験に対する試験片寸法及び試験方法 Specimen
dimensions and procedure for shear testing resistance
spot and embossed projection welded joints
JIS Z3137-1999 交叉拉伸试验电阻点焊和压印凸焊焊接点的样品尺寸和抽样程序
抵抗スポット及びプロジェクション溶接継手の十字引張試験に対する試験片寸法及び試験方法 Specimen
dimensions and procedure for cross tension testing
resistance spot and embossed projection welded
joints
JIS Z3138-1989 点焊接头疲劳试验法
スポット溶接継手の疲れ試験方法 Method of fatigue testing for
spot welded joint
JIS Z3141-1996 细缝焊接接点的试验方法
シーム溶接継手の試験方法 Method of test for seam welded
joints
JIS Z3143-1996 对接加压焊接接点试验方法
突合せ圧接継手の試験方法 Method of test for butt pressure
welded joints
JIS Z3145-1981 柱杆焊接区弯曲试验方法
頭付きスタッド溶接部の曲げ試験方法 Method of bend test for stud
welds
JIS Z3154-1993 受控的热严酷焊接裂纹试验方法
重ね継手溶接割れ試験方法 Method of controlled thermal severity
weld cracking test
JIS Z3157-1993 U形坡口焊接裂纹试验方法
Ｕ形溶接割れ試験方法 Method of U-groove weld cracking
test
JIS Z3158-1993 Y型坡口焊接裂纹试验方法
ｙ形溶接割れ試験方法 Method of y-groove weld cracking
test
JIS Z3159-1993 H形限制焊接裂纹试验方法
Ｈ形拘束溶接割れ試験方法 Method of H-type restrained weld
cracking test
JIS Z3181-2005 焊接消耗品用角焊试验的方法
溶接材料のすみ肉溶接試験方法 Method of fillet weld test for
welding consumables
JIS Z3185-2006 商店上等钢焊接消耗材料的可焊接试验方法
溶接材料の耐ペイント性試験方法 Weldability test method of welding
consumables with shop primed steels
JIS Z3192-1999 硬钎焊接头抗拉伸及抗剪切试验方法
ろう付継手の引張及びせん断試験方法 Methods of tensile and shear
tests for brazed joint
JIS Z3200-2005 焊接消耗品.焊接填充材料的交货技术条件.产品类型、尺寸、公差和标记
溶接材料－寸法，許容差，製品の状態，表示及び包装 Welding consumables
-- Technical delivery conditions for welding
filler materials -- Type of product, dimensions,
tolerances and markings
JIS Z3233-2001 等离子切割和焊接用惰性气体保护弧焊用钨焊条
イナートガスアーク溶接並びにプラズマ切断及び溶接用タングステン電極 Tungsten electrodes
for inert gas shielded arc welding, and for
plasma cutting and welding
JIS Z3312-2006 低碳钢、高强度钢用MAG焊接实心焊丝(修改件1)
MAG welding solid wires for mild steel and high
strength steel (Amendment 1)
JIS Z3312-2009 低碳钢、高强度钢和低温工作钢用MAG和MIG焊接用焊条
軟鋼，高張力鋼及び低温用鋼用のマグ溶接及びミグ溶接ソリッドワイヤ Solid wires
for MAG and MIG welding of mild steel, high
strength steel and low temperature service steel
JIS Z3317 AMD 1-2007 钼钢和铬钼铸钢用MAG焊接实心焊丝(修改件1)
モリブデン鋼及びクロムモリブデン鋼用マグ溶接ソリッドワイヤ（追補１） MAG welding
solid wires for molybdenum steel and chromium
molybdenum steel (Amendment 1)
JIS Z3318-2010 钼钢及铬钼铸钢的MAG焊接用药芯焊丝
モリブデン鋼及びクロムモリブデン鋼用マグ溶接フラックス入りワイヤ Flux cored
wires for MAG welding of molybdenum steel and
chromium molybdenum steel
JIS Z3321-2010 焊接用不锈钢棒、线和带状电极
溶接用ステンレス鋼溶加棒，ソリッドワイヤ及び鋼帯 Stainless steel rods,
wires and strip electrodes for welding
JIS Z3322-2010 用带状电极进行不锈钢搭接焊的焊接金属用分类和试验方法
ステンレス鋼帯状電極肉盛溶接金属の品質区分及び試験方法 Classification and
testing methods for weld metal of stainless
steel overlay welding with strip electrode
JIS Z3332-1999 9%镍钢TIG焊接用填充焊条和实心焊丝
９％ニッケル鋼用ティグ溶加棒及びソリッドワイヤ Filler rods and solid
wires for TIG welding of 9 % nickel steel
JIS Z3332 AMD 1-2007 9%镍钢的TIG焊接用焊条和实心焊丝(修改件1)
９％ニッケル鋼用ティグ溶加棒及びソリッドワイヤ（追補１） Filler rods and
solid wires for TIG welding of 9 % nickel steel
(Amendment 1)
JIS Z3334-1999 电弧焊接用镍及镍合金焊条及实心焊丝
ニッケル及びニッケル合金溶加棒及びソリッドワイヤ Nickel and nickel alloy
filler rods and solid wires for arc welding
JIS Z3400-1999 焊接的质量要求.金属材料的熔焊
溶接の品質要求事項 ― 金属材料の融接 Quality requirements for
welding -- Fusion welding of metallic materials
JIS Z3410-1999 焊接协调工作.任务及责任
溶接管理 ― 任務及び責任 Welding coordination -- Tasks
and responsibilities
JIS Z3420-2003 金属材料焊接程序规范及认可.总则
金属材料の溶接施工要領及びその承認 ― 一般原則 Specification and approval
of welding procedures for metallic materials
-- General rules
JIS Z3421-1-2003 金属材料焊接程序规范及认可.电弧焊接程序规范
金属材料の溶接施工要領及びその承認 ― アーク溶接の溶接施工要領書 Specification
and approval of welding procedures for metallic
materials -- Welding procedure specification
for arc welding
JIS Z3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分:钢的电弧焊及气焊和镍及镍合金的电弧焊
金属材料の溶接施工要領及びその承認 ― 溶接施工法試験 ― 第1部：鋼のアーク溶接及びガス溶接並びにニッケル及びニッケル合金のアーク溶接
Specification and approval of welding procedures
for metallic materials -- Welding procedure
tests -- Part 1: Arc and gas welding of steels
and arc welding of nickel and nickel alloys
JIS Z3422-2-2003 金属材料焊接程序的规范及合格鉴定.焊接程序试验.第2部分:铝及铝合金的电弧焊
金属材料の溶接施工要領及びその承認 ― 溶接施工法試験 ― 第２部：アルミニウム及びアルミニウム合金のアーク溶接
Specification and qualification of welding procedures
for metallic materials -- Welding procedure
test -- Part 2: Arc welding of aluminium and
its alloys
JIS Z3423-2006 焊接消耗品的采购指南
溶接材料の調達指針 Procurement guidelines for welding
consumables
JIS Z3604 ERRATUM 1-2002 铝及铝合金的惰性气体保护电弧焊接的推荐实施规程(勘误1)
アルミニウムのイナートガスアーク溶接作業標準 Recommended practice
for inert gas shielded arc welding of aluminium
and aluminium alloys (Erratum 1)
JIS Z3607-1994 碳钢摩擦焊接的推荐实用规程
炭素鋼の摩擦圧接作業標準 Recommended practice for friction
welding of carbon steel
JIS Z3700-2009 焊接后的热处理方法
溶接後熱処理方法 Methods of post weld heat treatment
JIS Z3703-2004 焊接.预热温度、程间温度和预热维修温度的测量指南
溶接－予熱温度，パス間温度及び予熱保持温度の測定方法の指針 Welding -- Guidance
on the measurement of preheating temperature,
interpass temperature and preheat maintenance
temperature
JIS Z3801-1997 手工焊接技术的标准合格鉴定程序
手溶接技術検定における試験方法及び判定基準 Standard qualification
procedure for manual welding technique
JIS Z3805-1997 钛焊接技术的标准合格鉴定程序
チタン溶接技術検定における試験方法及び判定基準 Standard qualification
procedure for welding technique of titanium
JIS Z3811-2000 铝和铝合金焊接技术的合格鉴定标准程序
アルミニウム溶接技術検定における試験方法及び判定基準 Standard qualification
procedure for welding technique of aluminium
and aluminium alloy
JIS Z3821-2001 不锈钢焊接技术合格鉴定标准程序
ステンレス鋼溶接技術検定における試験方法及び判定基準 Standard qualification
procedure for welding technique of stainless
steel
JIS Z3821 ERRATUM 1-2001 不锈钢焊接技术合格鉴定标准程序(勘误1)
Standard qualification procedure for welding
technique of stainless steel (Erratum 1)
JIS Z3831-2002 塑料焊接技术合格鉴定标准规程
プラスチック溶接技術検定における試験方法及び判定基準 Standard qualification
procedure for welding technique of plastics
JIS Z3841-1997 半自动焊接技术的标准合格鉴定程序
半自動溶接技術検定における試験方法及び判定基準 Standard qualification
procedure for semi-automatic welding technique
JIS Z3871-1987 铝和铝合金焊接用超声波检验技术的标准合格鉴定程序
アルミニウム溶接部の超音波探傷試験の技術検定における試験方法及び判定基準 Standard
qualification procedure for ultrasonic testing
technique of aluminium and aluminium alloy welds
JIS Z3881-2009 混凝土加固用钢筋气压焊接技术合格鉴定标准程序
鉄筋のガス圧接技術検定における試験方法及び判定基準 Standard qualification
procedure for gas pressure welding technique
of steel bars for concrete reinforcement
JIS Z3920-1991 焊接烟尘化学分析方法
溶接ヒューム分析方法 Methods for chemical analysis of
elements in welding fumes
JIS Z3930-2001 电弧焊接中微粒烟尘排放率的测定
アーク溶接のヒューム発生量測定方法 Determination of emission
rate of particulate fume in arc welding
JIS Z3950-2005 焊接环境中气载灰尘浓度的测量方法
溶接作業環境における浮遊粉じん濃度測定方法 Methods of measurement
for airborne dust concentration in welding environment
JIS Z3952-2005 焊接环境中气体浓度的测量方法
溶接作業環境におけるガス濃度測定方法 Methods of measurement for
gas concentration in welding environment
法国焊接标准(NF welding standards)
--------------------------------------------------------------------------------
编号 中文名称 英文名称
NF A03-720-2-2002 混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维
(Steel for the reinforcement and prestressing
of concrete - Test methods - Part 2 : welded
fabric.)
NF A35-018-1984 钢筋混凝土用钢筋.焊接的适合性 (Concrete reinforcing
bars. Suitability for welding.)
NF A35-019-2-1996 钢筋混凝土用钢筋.可焊刻痕丝制钢筋.第2部分:焊接钢筋网
(Concrete reinforcing steels. Reinforcing steels
made of weldable indented wires. Part 2 : welded
fabric.)
NF A35-021-1998 混凝土用钢材.用于增强钢制备的可焊接金属线 (STEELS
FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION
OF REINFORCING STEELS.)
NF A35-052-1987 钢铁产品.带改进粘附性的焊接钢丝网和钢丝用非合金钢线材
(Iron and steel. Unalloyed steel wire rod for
welded fabric and wire with improved adherence.)
NF A36-000-1979 结构钢和锅炉与压力容器用钢的焊接特性的推荐规范 (RECOMMENDATIONS
CONCERNING THE WELDABILITY OF STRUCTURAL STEEL
AND OF BOILER AND PRESSURE VESSELS STEEL.)
NF A36-205-5-2003 压力容器用钢制扁平产品.第5部分:热机轧制的可焊接细粒钢
(Flat products made of steels for pressure purposes
- Part 5 : weldable fine grain steels, thermomechanically
rolled.)
NF A36-205-6-2003 压力容器用钢制扁平产品.第6部分:可焊接淬火和回火细粒钢
(Flat products made of steels for pressure purposes
- Part 6 : weldable fine grain steels, quenched
and tempered.)
NF A36-211-1997 焊接气体气缸用薄钢板和条带 (Steel sheet and
strip for welded gas cylinders.)
NF A36-212-2002 固定近海结构的可焊接结构钢.技术交货条件 (Weldable
structural steels for fixed offshore structures
- Technical delivery conditions.)
NF A36-226-2001 具有规定的高温特性的压力容器用热轧可焊接钢棒 (Hot
rolled weldable steel bars for pressure purposes
with specified elevated temperature properties.)
NF A36-605-1982 锅炉和压力容器用焊接钢冲压锻件.碳钢和碳锰钢.牌号与型号
(Weldable steel drip forged articles for boilers
and pressure vessels. Carbon and carbon-manganese
steels. Grades and types .)
NF A36-606-1982 锅炉和压力容器用焊接钢冲压锻件.钼、锰钼和铬钼合金钢.牌号和型号
(Weldable steel drop forged articles for boilers
and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy
steels. Grades and types.)
NF A36-620-4-1999 承压用钢锻件.第4部分:高弹性强度的可焊接细粒钢 (STEEL
FORGINGS FOR PRESSURE PURPOSES. PART 4 : WELDABLE
FINE GRAIN STEELS WITH HIGH PROOF STRENGTH.
(EUROPEAN STANDARD EN 10222-4).)
NF A36-620-4/A1-2002 承压用钢锻件.第4部分:高弹性强度的可焊接细晶粒钢
(Steel forgings for pressure purposes - Part
4 : weldable fine grain steels with high proof
strength.)
NF A49-004-1984 钢管.无缝管和圆截面焊接管及焊接配件.尺寸总图及优选 (Steel
tubes. Seamless and welded tubes with circular
section and supplies to be welded. General outlay
of dimensions. Preferential selection.)
NF A49-005-2003 焊接和无缝钢管.管的尺寸和单位长度重量的一览表 (Seamless
and welded steel tubes - General tables of dimensions
and masses per unit length.)
NF A49-141-1978 钢管.一般商业用中压平端焊接钢管.（尺寸.交货技术条件.）
(STEEL TUBES. WELDED PLAIN END TUBES OF COMMERCIAL
QUALITY FOR GENERAL PURPOSES AT MEAN PRESSURE.
DIMENSIONS TECHNICAL DELIVERY CONDITIONS.)
NF A49-145-1978 钢管.热加工细螺纹焊接钢管.（尺寸.交货技术条件.） (STEEL
TUBES. HOT-FINISHED WELDED TUBES SUITABLE FOR
THREADING.DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A49-147-1980 钢管.一般用和管道用光端纵向焊接钢管.奥氏体不锈钢.（尺寸.交货技术条件.）
(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED
TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC
STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY
CONDITIONS.)
NF A49-148-1980 钢管.一般用和管道用光端纵向焊接钢管.铁素体不锈钢.（尺寸.交货技术条件.）
(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED
TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC
STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY
CONDITIONS.)
NF A49-150-1985 钢管.水管系统用涂覆或保护焊接管.尺寸.交货技术条件 (Steel
tubes. Welded tubes intended to be coated or
protected for use in water piping systems. Dimensions.
Technical delivery conditions.)
NF A49-151-2003 包括饮用水在内的含水液体输送用焊接不锈钢管.交货技术件
(Welded stainless steel tubes for the conveyance
of aqueous liquids including water for human
consumption - Technical delivery conditions.)
NF A49-160-1979 钢管.混凝土包的加热板用的焊接钢管.（尺寸.交货技术条件.）
(STEEL TUBES. WELDED TUBES FOR HEATING PANELS
ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY
CONDITIONS.)
NF A49-170-1-1999 对缝焊接管道配件.第1部分:一般使用和无特殊检验要求的锻碳钢
(Butt-welding pipe fittings - Part 1 : Wrought
carbon steel for general use and without specific
inspection requirements.)
NF A49-189-1980 钢管.90度镀锌3d样式的焊接曲线.（尺寸.交货技术条件.）
(STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED
DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A49-191-1975 钢管.毛细管焊接或焊接钎接用钢或铸铁接头.（尺寸.交货技术条件.）
(STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE
OF STEEL OR CAST IRON FOR CAPILLARY BRAZING
OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY
CONDITIONS.)
NF A49-192-1981 钢管.压力容器用内螺纹非合金钢焊接套管 (STEEL TUBES.
WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE
EQUIPMENT.)
NF A49-201-1-2002 焊接压力钢管.交货技术条件.第1部分:规定室温特性的非合金钢管
(Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 1 : non-alloy
steel tubes with specified room temperature
properties.)
NF A49-201-2-2002 焊接压力钢管.交货技术条件.第2部分:规定高温特性的电焊合金和非合金钢管
(Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 2 : electric
welded non-alloy and alloy steel tubes with
specified elevated temperature properties.)
NF A49-201-3-2002 焊接压力钢管.交货技术条件.第3部分:合金细晶粒结构钢管
(Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 3 : alloy
fine grain steel tubes.)
NF A49-201-4-2002 焊接压力钢管.交货技术条件.第4部分:规定低温特性的电焊非合钢管
(Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 4 : electric
welded non-alloy steel tubes with specified
low temperature properties.)
NF A49-201-5-2002 焊接压力钢管.交货技术条件.第5部分:规定高温特性的埋弧焊接非合金和合金钢管
(Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 5 : submerged
arc welded non-alloy and alloy steel tubes with
specified elevated temperature properties.)
NF A49-201-6-2002 焊接压力钢管.交货技术条件.第6部分:规定低温特性的埋弧焊接非合金钢管
(Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 6 : submerged
arc welded non-alloy steel tubes with specified
low temperature properties.)
NF A49-244-1993 钢管.压力设备用焊接奥氏体不锈钢和奥氏铁素体轧制钢管的尺寸和技术交货条件
(STEEL TUBES. WELDED AUSTENITIC STAINLESS AND
AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE
SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR
DELIVERY.)
NF A49-247-1981 钢管.热交换器用纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件
(Steel tubes. Tubes welded longitudinally for
heat exchangers. Austenitic stainless steels.
Dimensions. Technical delivery conditions.)
NF A49-249-1980 钢管.食品工业用光端纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件
(Steel tubes. Longitudinally welded plain end
tubes for the food industry. Austenitic stainless
steels. Dimensions. Technical delivery conditions.)
NF A49-285-1982 钢管.有质量要求的非合金或合金钢制对缝焊接椭圆底座.尺寸.交货技术条件
(Steel tubes. Unalloyed or alloy steel butt
welding elliptic caps with quality requirements.
Dimensions. Technical delivery conditions.)
NF A49-289-1990 钢管.用于高低温条件下的对缝焊接管状配件.非合金、合金和不锈钢.尺寸.技术交货条件
(Steel tubes. Butt welding tubular fittings
used at low and high temperature. Non alloy,
alloy and stainless steels. Dimensions. Technical
delivery conditions.)
NF A49-296-1983 钢管.带质量要求的熔焊非合金或合金钢制等径或缩径焊接三通管.尺寸.交货技术条件
(Steel tubes. Unalloyed or alloy steel butt
welding tees made by saw process with equal
or reduced branches, with quality requirements.
Dimensions. Technical delivery conditions.)
NF A49-300-2-2003 精密装置用钢管.交货技术条件.第2部分:焊接冷拉管
(Steel tubes for precision applications - Technical
delivery conditions - Part 2 : welded cold drawn
tubes.)
NF A49-300-3-2003 精密装置用钢管.技术交货条件.第3部分:焊接冷分级管
(Steel tubes for precision applications - Technical
delivery conditions - Part 3 : welded cold sized
tubes.)
NF A49-300-5-2003 精密用途钢管.技术交货条件.第5部分:焊接冷精加工方形和矩形钢管
(Steel tubes for precision applications - Technical
delivery conditions - Part 5 : welded and cold
sized square and rectangular tubes.)
NF A49-341-1975 钢管.机械用精密焊接钢管.（尺寸.交货技术条件.） (STEEL
TUBES-PRECISION WELDED TUBES FOR MECHANICAL
APPLICATION-DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A49-343-1980 钢管.机械用D小于或等于168.3mm的纵向焊接钢管.（尺寸.交货技术条件.）
(STEEL TUBES. LONGITUDINALLY WELDED D INFERIOR
OR EQUAL TO 168,3 MM FOR ENGINEERING USE. DIMENSIONS.
TECHNICAL DELIVERY CONDITIONS.)
NF A49-540-1-1997 非合金细晶粒结构钢的冷成形焊接结构空心型材.第1部分:交货技术要求
(Cold form welded structural hollow sections
of non-alloy and fine grain steels. Part 1 :
technical delivery requirements.)
NF A49-647-1979 钢管.不锈钢、铁素体和奥氏体钢制圆形、正方形、矩形或椭圆形建筑用焊接钢管.（尺寸.交货技术条件.）
(STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR
OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS
STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF
DELIVERY.)
NF A49-716-1998 钢管.焊接接头镀膜配件和管的外结构. (STEEL TUBE.
EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING
FOR WELDED JOINT.)
NF A49-875-1-1996 钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验
(Non destructive testing of steels tubes. Part
1 : automatic electromagnetic testing of seamless
and welded (except submerged arc welded) ferromagnetic
steel tubes for verification of hydraulic leak-tightness.)
NF A49-875-11-2000 钢管的无损检验.第11部分:检测表面缺陷用无缝和焊接钢管的液体渗透试验
(Non-destructive testing of steel tubes - Part
11 : liquid penetrant testing of seamless and
welded steel tubes for the detection of surface
imperfections.)
NF A49-875-12-2000 钢管的无损检验.第12部分:检测表面缺陷用无缝和焊接锰钢管的磁粉检测
(Non-destructive testing of steel tubes - Part
12 : magnetic particle inspection of seamless
and welded ferromagnetic steel tubes for the
detection of surface imperfections.)
NF A49-875-13-2000 钢管的无损检验.第13部分:无缝和焊接(埋弧焊)钢管的自动全周边超声厚度检测
(Non-destructive testing of steel tubes - Part
13 : automatic full peripheral ultrasonic thickness
testing for seamless and welded (except submerged
ar welded) steel tubes.)
NF A49-875-14-2000 钢管的无损检验.第14部分:层面缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动超声试验
(Non-destructrive testing of steel tubes - Part
14 : automatic ultrasonic testing of seamless
and welded (except submerged arc-welded) steel
tubes detection of laminar imperfections.)
NF A49-875-15-2000 钢管的无损检验.第15部分:层面缺陷探测用焊接钢管的生产用焊接带材/板材自动超声试验
(Non-destructive testing of steel tubes - Part
15 : automatic ultrasonic testing of strip/plate
used in the manufacure of welded steel tubes
for the detection of laminar imperfections.)
NF A49-875-16-2000 钢管的无损检验.第16部分:层面缺陷探测用焊接钢管的焊缝邻近区域的自动超声试验
(Non-destructive testing of steel tubes - Part
16 : automatic ultrasonic testing of the area
adjacent to the weld seam of welded steel tubes
for the detection of laminar imperfections.)
NF A49-875-17-2000 钢管的无损检验.第17部分:层面缺陷探测用无缝和焊接钢管末端超声试验
(Non-destructive testing of steel tubes - Part
17 : ultrasonic testing of tubes ends of seamless
and welded steel tubes for the detection of
laminar imperfections.)
NF A49-875-18-2000 钢管的无损检验.第18部分:层面缺陷探测用无缝和焊接锰钢管末端磁粉检验
(Non-destructive testing of steel tubes - Part
18 : magnetic particle inspection of tube ends
of seamless and welded ferromagnetic steel tubes
for the detection of laminar imperfections.)
NF A49-875-2-2000 钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验
(Non-destructive testing of steel tubes - Part
2 : automatic eddy current testing of seamless
and welded (except submerged arc-welded) austenitic
and austenitic-ferritic steel tubes for verification
of)
NF A49-875-3-2000 钢管的无损检验.第3部分:检测缺陷用无缝和焊接钢管(埋弧焊除外)的自动涡流试验
(Non-destructive testing of steel tubes - Part
3 : automatic eddy current testing of seamless
and welded (except submerged arc-welded) steel
tubes for the detection of imperfections.)
NF A49-875-5-2000 钢管的无损检验.第5部分:检测纵向缺陷用无缝和焊接(除埋弧焊)锰钢管的自动全周边电磁变换器/磁漏试验
(Non-destructive testing of steel tubes - Part
5 : automatic full peripheral magnetic transducer/flux
leakage testing of seamless and welded (except
submerged arc welded) ferromagnetic steel tubes
for)
NF A49-875-7-1996 钢管的无损试验.第7部分:纵向缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动全周边超声波试验
(Non destructive testing of steel tubes. Part
7 : automatic full peripheral ultrasonic testing
of seamless and welded (except submerged arc
welded) steel tubes for the detection of longitudinal
imperfections.)
NF A50-425-1998 轻金属及其合金.危险产品传输箱构造可焊接产品 (ALUMINIUM
AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR
THE CONSTRUCTION OF TANKS FOR THE TRANSPORTATION
OF DANGEROUS GOODS.)
NF A50-650-4-1997 铝和铝合金.挤压棒材.焊接设备的特殊要求 (Aluminium
and aluminium alloys. Drawing stock. Part 4
: specific requirements for welding applications.)
NF A50-802-1988 铝和铝合金.大直径焊接管.尺寸和公差 (ALUMINIUM
AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED
TUBES. DIMENSIONS AND TOLERANCES.)
NF A51-307-2003 铜和铜合金.焊接和钎焊用棒材和线材 (Copper and
copper alloys - Rod and wire for welding and
braze welding.)
NF A80-002-2003 焊接.焊接和相关工艺的多语种术语列表 (Welding
- Multilingual list of terms for welding and
related processes.)
NF A80-010-1997 焊接.工作位置.坡度角和旋转角的定义 (Welds. Working
positions. Definitions of angles of slope and
rotation.)
NF A80-021-2000 焊接及有关工艺.工艺和参考值的命名 (Welding and
allied processes - Nomenclature of processes
and reference numbers.)
NF A80-022-1999 焊接.带说明的多语种接头术语 (WELDING. MULTILINGUAL
TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS.
(EUROPEAN STANDARD EN 12345).)
NF A80-230-1-1998 焊接和合金过程.金属材料几何缺陷的分类.第1部分:熔焊(欧洲标准6520-1)
(Welding and allied processes. Classification
of geometric imperfections in metallic materials.
Part 1 : fusion welding.)
NF A80-230-2-2003 焊接和相关工艺.金属材料中几何缺陷的分类.第2部分:带压焊接
(Welding and allied processes - Classification
of geometric imperfections in metallic materials
- Part 2 : welding with pressure.)
NF A81-053-1989 焊接.钎焊.硬钎焊.焊条.验收试验规程 (WELDING.
BRASING. SOLDERING. BRAZE-WELDING. FILLER MATERIALS.
ACCEPTANCE TESTING PROCEDURES.)
NF A81-056-2000 焊条.焊接及有关工艺用焊条的生产、供应和分配的质量要求
(Welding consumables - Quality requirements
for manufacture, supply and distribution of
consumables for welding and allied processes.)
NF A81-303-2003 手工电弧焊用涂敷焊条.焊接金属沉积方法.硬度试验 (Covered
electrodes for manual metal arc welding - Procedure
for the deposition of weld metal - Hardness
tests.)
NF A81-304-2002 焊接消耗品.化学分析用的焊接金属垫片的沉积 (Welding
consumables - Deposition of a weld metal pad
for chemical analysis.)
NF A81-305-2001 焊接和有关工艺.铁素体钢电弧焊金属中氢含量的测定 (Welding
and allied processes - Determination of hydrogen
content in ferritic steel arc weld metal.)
NF A81-309-1995 焊接可熔化性.非合金和低合金钢的手工金属弧焊接用药皮焊条
(Welding consumables. Covered electrodes for
manual metal arc welding of non alloy and fine
grain steels. Classification.)
NF A81-320-2001 焊接消耗品.通过测量可扩散氢测定手工电弧焊电极的抗湿性
(Welding consumables - Determination of moisture
resistance of manual metal arc welding electrodes
by measurement of diffusible hydrogen.)
NF A81-325-1997 焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层
(WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS
FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY
AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN
STANDARD EN 1668).)
NF A81-331-1984 焊接、硬钎焊和硬焊铝及铝合金用填充金属材料.符号.规范
(Filler materials for welding, brazing and braze
welding aluminium and aluminium alloys. Symbolization.
Specifications.)
NF A81-340-1997 焊条.高强度钢的手工电弧焊接用金属药皮焊条.分类(欧洲标准EN
757) (Welding consumables. Covered electrodes
for manual metal arc welding of high strength
steels. Classification.)
NF A81-350-1997 焊条.非合金钢及细粒钢的有和无气体保护的金属电弧焊接用管状焊丝.分类(欧洲标准EN
758) (Welding consumables. Tubular cored electrodes
for metal arc welding with and without a gas
shield of non aloy and fine grain steels. Classification.)
NF A81-361-1999 焊接.填充材料(欧洲标准EN 1044) (Brazing.
Filler metals.)
NF A81-362-2002 焊接.软钎焊.钎焊.硬钎焊.软钎焊、钎焊及硬钎焊用焊料.分类、编码和验收试验
(Welding, soldering, brasing, braze-welding
- Filler metals for soldering, brazing and braze-welding
- Classification, coding, acceptance testing.)
NF A81-369-1995 软钎焊、硬钎焊接和铜焊用填充金属.命名(欧洲标准EN ISO
3677) (FILLER METAL FOR SOFT SOLDERING, BRAZING
AND BRAZE WELDING. DESIGNATION. (EUROPEAN STANDARD
EN ISO 3677).)
NF A81-410-1984 铝和铝合金.焊接、硬钎焊和钎焊.基础产品和焊条的选择 (ALUMINIUM
AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE
WELDING. BASE MATERIALS AND SELECTION OF FILLER
MATERIALS.)
NF A81-900-1973 铝和铝合金.焊接.焊剂的使用和检查 (ALUMINIUM
AND ALUMINIUM ALLOYS. WELDING. USE AND TESTING
OF WELDING FLUXES.)
NF A82-001-1990 电阻焊接设备.电阻焊和类似技术用电焊机电气设备的安全规程
(Safety requirements for the construction and
the installation of equipment for resistance
welding and allied processes.)
NF A82-020-1985 电阻焊接.电阻焊机.规范和试验 (Electric resistance
welding. Machines for electric resistance welding.
Specifications and tests.)
NF A82-025-1986 电阻焊接.整流电流的电阻焊机.规范和试验 (ELECTRIC
RESISTANCE WELDING. MACHINES FOR ELECTRIC RESISTANCE
WELDING WITH RECTIFIED CURRENT. SPECIFICATIONS
AND TESTS.)
NF A82-030-1992 电阻焊接设备的图形符号 (Graphical symbols
for resistance welding equipment.)
NF A82-040-1985 电阻焊接.电阻焊机用变压器.适用于所有变压器的通用规范
(Electric resistance welding. Transformers for
resistance welding machines. General specifications
applicable to all transformers.)
NF A82-041-1987 电阻焊接.汽车工业中多点焊接用的带分离式二次线组的变压器.特殊规范
(Resistance welding. Transformers with two separate
secondary windings for multispot welding as
used in automobile industry. Particular specifications.)
NF A82-043-1996 电阻焊接.焊接枪用集成变压器 (Electric resistance
welding. Integrated transformers for welding
guns.)
NF A82-045-1986 电阻焊接.电阻焊机用多组整流器.规范和试验 (ELECTRIC
RESISTANCE WELDING. RECTIFIER EQUIPMENT FOR
RESISTANCE WELDING MACHINES. SPECIFICATIONS
AND TESTS.)
NF A82-100-1987 电阻焊接.电阻焊接用电极材料及辅助设备 (Electric
resistance welding. Materials for resistance
welding electrodes and ancillary equipments.)
NF A82-104-1-2000 电阻焊接设备.电极接头,外锥度1:10.第1部分:圆锥形接头,锥度1:10
(Resistance welding equipment - Electrode adaptors,
male taper 1:10 - Part 1 : conical fixing, taper
1:10.)
NF A82-105-1985 电阻焊接.带电极帽、内锥度配合和凸头电极帽的直电阻点焊电极.尺寸和公差(锥度1/10)
(Electric resistance welding. Straight resistance
spot welding electrodes with caps, male taper
fits and male caps. Sizes and tolerances (taper
1/10).)
NF A82-108-1992 焊接滚轮坯料的尺寸 (Dimensions of seam
welding wheel blanks.)
NF A82-110-2001 电阻焊接设备.与水冷部分连接的二级连接电缆.尺寸和特性
(Resistance welding equipment - Secondary connecting
cables with terminals connected to water-cooled
lugs - Dimensions and characteristics.)
NF A82-112-2-2002 电阻焊接水冷次级线圈连接电缆.第2部分:单根导线连接电缆的尺寸及要求
(Water-cooled secondary connection cables for
resistance welding - Part 2 : dimensions and
requirements for single-conductor connection
cables.)
NF A82-112-3-1996 电阻焊接水冷次级线圈连接电缆.第3部分:试验要求 (WATER-COOLED
SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING.
PART 3 : TEST REQUIREMENTS. (EUROPEAN STANDARD
EN ISO 8205-3).)
NF A82-150-1987 电阻焊接多点焊接机用无外壳千斤顶.一般规范 (Electric
resistance welding. Pneumatic cylinders without
liners for multiple spot welding machines. General
specifications.)
NF A82-160-1987 电阻焊接.多点焊接机用无外壳千斤顶.尺寸 (Electric
resistance welding. Pneumatic cylinders without
liners for multiple spot welding machines. Sizes.)
NF A82-199-1992 电阻焊接设备绝缘帽和套管 (Insulation caps
and bushes for resistance welding equipment.)
NF A82-740-1992 加厚焊接机台的槽 (Slots in platens for
projection welding machines.)
NF A83-011-1995 气焊设备.氧/燃料(切割机型)圆柱筒焊接.结构型式,一般规范,试验方法
(Gas welding equipment. Oxygen/fuel blowpipes
(cutting machine type) of cylindrical barrel.
Type of construction, general specifications,
test methods.)
NF A84-410-2003 气焊设备.焊接、切割和相关工艺中使用的压力计 (Gas
welding equipment - Pressure gauges used in
welding, cutting and allied processes.)
NF A84-431-1999 气焊设备.焊接、切割和类似工艺用300巴以下的气瓶调压器
(Gas welding equipment. Pressure regulators
for gas cylinders used in welding, cutting and
allied processes up to 300 bar.)
NF A84-432-2003 气焊设备.焊接、切割和相关工艺的气瓶上用整体流量计式调节器.分类、规范和试验
(Gas welding equipment - Integrated flowmeter
regulators used on cylinders for welding, cutting
and allied processes - Classification, specification
and tests.)
NF A84-433-2001 气焊设备.小于等于300bar的焊接、切削及相关工艺用多头管系用压力调节器
(Gas welding equipment - Pressure regulators
for manifold systems used in welding, cutting
and allied processes up to 300 bar.)
NF A84-443-1999 气焊设备.焊接、切割和相关工艺的乙炔多功能系统.一般要求
(GAS WELDING EQUIPMENT. ACETYLENE MANIFOLD SYSTEMS
FOR WELDING, CUTTING AND ALLIED PROCESSES. GENERAL
REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14114).)
NF A84-444-2003 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求
(Gas welding equipment - Acetylene manifold
systems for welding, cutting and allied processes
- Safety requirements in high-pressure devices.)
NF A84-530-1996 焊接、切割和加热用手动吹管.规范和试验 (Manual
blowpipes for welding, cutting and heating.
Specifications and tests.)
NF A84-621-2002 气焊设备.焊接、切割和相关工艺用带截止阀的速动连接 (Gas
welding equipment - Quick-action coupling with
shut-off valves for welding, cutting and allied
processes.)
NF A84-622-1994 气焊设备.焊接设备,切割和连接技术用软管连接 (Gas
welding equipment. Hose connections for equipment
for welding, cutting and allied processes.)
NF A84-623-1996 气熔焊设备.焊接,切割和有关工艺管组件规范 (Gas welding
equipment. Specification for hose assemblies
for equipment for welding, cutting and allied
processes.)
NF A85-004-1988 电阻焊接及有关技术用的设备上用的图形符号与指示灯 (EQUIPMENTS
FOR ARC WELDING AND ALLIED PROCESSES. GRAPHICAL
SYMBOLS TO BE USED ON EQUIPMENTS.)
NF A85-009-1-2000 电弧焊设备.第1部分:焊接电源 (Arc welding
equipment - Part 1 : welding power sources.)
NF A85-009-1/A1-2001 电弧焊设备.第1部分:焊接电源 (Arc welding
equipment - Part 1 : welding power sources.)
NF A85-600-1978 使用药皮焊条手工焊接用焊钳.安全规则.规范.类型试验 (ELECTRODE
HOLDER FOR MANUAL ARC WELDING WITH COATED ELECTRODES
SAF-ETY RULES,SPECIFICATIONS AND TESTS.)
NF A85-610-1984 电弧焊接电缆的连接装置.安全规则.规范.类型试验 (CONNECTORS
FOR ARC WELDING CABLES. SAFETY RULES. REQUIREMENTS.
TYPE TESTS. MARKING.)
NF A85-620-1986 电弧焊接.干燥箱和药皮焊条的储藏.规范和试验 (ELECTRIC
ARC WELDING. OVENS FOR THE DRYING AND STORAGE
COVERED ELECTRODES. SPECIFICATIONS AND TESTS.)
NF A87-010-1973 铝和铝合金.焊接.边的准备 (ALUMINIUM AND
ALUMINIUM ALLOYS. WELDING. WELD PREPARATIONS.)
NF A87-012-2-2000 焊接.钢的基本焊接接合详图.第2部分:非内部压力器件
(Welding - Basic weld joint details in steel
- Part 2 : non internal pressurized components.)
NF A87-013-2-1999 焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊
(WELDING AND ALLIED PROCESSES. JOINT PREPARATION.
PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN
STANDARD EN ISO 9692-2).)
NF A87-013-3-2001 焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊
(Welding and allied processes - Recommendations
for joint preparation - Part 3 : metal inert
gas welding and tungsten inert gas welding of
aluminium and its alloys.)
NF A87-021-1998 焊接.弧双端螺栓焊接的双端螺栓和陶瓷箍.(欧洲标准EN
ISO 13918) (Welding. Studs and ceramic ferrules
for arc stud welding.)
NF A88-112-1998 焊接操作人员.焊接操作人员用金属材料全机械化和自动焊接用熔焊和阻焊装置验收试验
(Welding personnel. Approval testing of welding
operators for fusion welding and resistance
weld setters for fully mechanized and automatic
welding of metallic materials.)
NF A88-121-1994 焊接条件.任务和责任 (WELDING COORDINATION.
TASKS AND RESPONSIBILITIES. (EUROPEAN STANDARD
EN 719).)
NF A88-200-1-2002 焊接和相关过程中的健康和安全.电弧焊接产生的烟尘和气体取样的实验室方法.第1部分:排放率测定和颗粒烟尘的
(Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
generated by arc welding - Part 1 : determination
of emission rate and sampling for analysis of
partic)
NF A88-200-2-2003 焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率测
(Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
generated by arc welding - Part 2 : determination
of emission rates of gases, except ozone.)
NF A88-200-3-2003 焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第3部分:用固定点测量法测定臭氧
(Health and safety in welding and allied processes
- Laboratory method for sampling fume and gases
generated by arc welding - Part 3 : determination
of ozone concentration using fixed point measurement)
NF A88-202-1-2001 焊接和有关工艺中的健康和安全.工作人员呼吸区空气粒子和气体的取样.第1部分:气体粒子的取样
(Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operator's breathing zone - Part 1 : sampling
of airborne particles.)
NF A88-202-2-2000 焊接和有关工艺中的健康和安全.工作人员工作区空气粒子和气体的取样.第2部分:气体取样
(Health and safety in welding and allied processes
- Sampling of airborne particles and gases in
the operator's breathing zone - Part 2 : sampling
of gases.)
NF A88-230-1997 焊接和联接工艺过程中的健康和安全.弧焊工艺用透明焊接隔层,板条和屏蔽
(Health and safety in welding and allied processes.
Transparent welding curtains, strips and screens
for arc welding processes.)
NF A88-230/A1-2002 焊接及相关工艺的卫生和安全.弧焊用透明焊接防护罩、安全带和屏蔽物
(Health and safety in welding and allied processes
- Transparent welding curtains, strips and screens
for arc welding processes.)
NF A88-800-2003 塑料焊接人员.焊工资格检验.热塑焊接组件 (Plastics
welding personnel - Qualification testing of
welders - Thermoplastics welded assemblies.)
NF A88-950-1-2002 水下焊接焊工资格检验。第１部分：高压湿焊的潜水焊工
(Qualification testing of welders for under-water
welding - Part 1 : diver-welders for hyperbaric
wet welding.)
NF A88-950-2-2002 水下焊接焊工资格检验。第2部分：高压干焊的潜水焊工和焊接操作者
(Qualification testing of welders for under-waster
welding - Part 2 : diver-welders and welding
operators for hyperbaric dry welding.)
NF A89-010-1-1992 金属材料焊接工艺与验收规范.第1部分:熔焊一般规则(欧洲标准EN
288-1) (Specification and approval of welding
procedures for metallic materials. Part 1 :
general rules for fusion welding.)
NF A89-010-10-1996 金属材料焊接工艺的验收和规范.第10部分:电子束焊接工艺规范
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES
FOR METALLIC MATERIALS. PART 10 : WELDING PROCEDURE
SPECIFICATION FOR ELECTRON BEAM WELDING. (EUROPEAN
STANDARD EN ISO 9956-10).)
NF A89-010-11-1996 金属材料焊接工艺的验收和规范.第11部分:激光束焊接工艺规范
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES
FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE
SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN
STANDARD EN ISO 9956-11).)
NF A89-010-2-1992 金属材料焊接工艺与验收规范.第2部分:电弧焊焊接程序规范(欧洲标准EN
288-2) (Specification and approval of welding
procedures for metallic materials. Part 2 :
welding procedure specification for arc welding.)
NF A89-010-3-1992 金属材料焊接工艺的验收和规范.第3部分:钢件电弧焊焊接工艺试验(欧洲标准EN
288-3) (Specification and approval of welding
procedures for metallic materials. Part 3 :
welding procedure tests for the arc welding
of steels.)
NF A89-010-5-1994 金属材料焊接程序的规范和认可.第5部分:使用批准的电弧焊焊条进行认可
(Specification and approval of welding procedures
for metallic materials. Part 5 : approval by
using approved welding consumables for arc welding.)
NF A89-010-6-1994 金属材料焊接程序的规范和认可.第6部分:有关以前试验的认可
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES
FOR METALLIC MATERIALS. PART 6 : APPROVAL RELATED
TO PREVIOUS EXPERIENCE. (EUROPEAN STANDARD EN
288-6).)
NF A89-010-7-1995 金属材料焊接程序的规范和认可.第七部分:使用电弧焊标准接程序进行认可
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES
FOR METALLIC MATERIALS. PART 7 : APPROVAL BY
A STANDARD WELDING PROCEDURE FOR ARC WELDING.
(EUROPEAN STANDARD EN 288-7).)
NF A89-010-8-1995 金属材料焊接程序的规范和认可.第八部分:利用预生产焊接试验进行认可
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES
FOR METALLIC MATEIRALS. PART 8 : APPROVAL BY
A PRE-PRODUCTION WELDING TEST. (EUROPEAN STANDARD
EN 288-8).)
NF A89-011-1986 煤气或蒸气用钢压力器.焊接操作方式的鉴定.固定在横木顶杆或拉杆.竖杆壁上的连接情况
(STEEL VESSELS SUBJECT TO GAS OR STEAM PRESSURE.
QUALIFICATION OF A WELDING PROCEDURE. APPLICATION
TO THE WELDING OF TIE BARS,BRACES AND BOLTS
ON TO A WALL.)
NF A89-052-2-2001 金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊
(Specification and qualification of welding
procedures for metallic materials - Welding
procedure specification - Part 2 : gas welding.)
NF A89-057-11-2002 金属材料焊接程序规范和鉴定.焊接程序试验.第11部分:电子和激光射线焊接
(Specification and qualification of welding
procedures for metallic materials - Welding
procedure test - Part 11 : electron and laser
beam welding.)
NF A89-057-8-2002 金属材料焊接程序规范和鉴定.焊接程序试验.第8部分:管对管-板接头的焊接
(Specification and qualification of welding
procedures for metallic materials - Welding
procedure test - Part 8 : welding of tubes to
tube-plate joints.)
NF A89-101-1-1998 焊接.金属材料焊接推荐.第1部分:电弧焊接的一般指南
(WELDING. RECOMMENDATIONS FOR WELDING OF METALLIC
MATERIALS. PART 1 : GENERAL GUIDANCE FOR ARC
WELDING. (EUROPEAN STANDARD EN 1011-1).)
NF A89-101-1/A1-2002 焊接.金属材料焊接的推荐规范.第1部分:电弧焊接通用指南
(Welding - Recommendations for welding of metallic
materials - Part 1 : general guidance for arc
welding.)
NF A89-101-2-2002 焊接.金属材料焊接的推荐规范.第2部分:铁素体钢的电弧焊
(Welding - Recommendations for welding of metallic
materials - Part 2 : arc welding of ferritic
steel.)
NF A89-101-3-2000 焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊
(Welding - Recommendations for welding of metallic
materials - Part 3 : arc welding of stainless
steels.)
NF A89-101-4-2000 焊接.金属材料焊接的推荐方法.第4部分:铝和铝合金的电弧焊
(Welding - Recommendations for welding of metallic
materials - Part 4 : arc welding of aluminium
and aluminium alloys.)
NF A89-101-5-2003 焊接.金属材料焊接的推荐方法.第5部分:包层钢焊接
(Welding - Recommendations for welding of metallic
materials - Part 5 : welding of clad steel.)
NF A89-204-2-1996 金属材料焊接的破坏试验.硬度试验.第2部分:焊接接缝的微硬度试验(欧洲标准EN
1043-2) (DESTRUCTIVE TESTS ON WELDS IN METALLIC
MATERIALS. HARDNESS TEST. PART 2 : MICRO HARDNESS
TESTING ON WELDED JOINTS. (EUROPEAN STANDARD
EN 1043-2).)
NF A89-206-1987 电阻焊.点焊与凸焊.焊接点用扭转剪切试件 (Welding
and allied techniques. Resistance spot, projection
and seam welded lap joints. Tension shear tests.)
NF A89-207-2000 焊接.在奥氏体和双重铁素体奥氏体铬镍不锈钢焊接金属中铁素体数目的测定
(Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals.)
NF A89-208-1987 焊接和有关技术.点焊,凸焊或缝焊搭接接头 (WELDING
AND ALLIED TECHNIQUES. SPOT,PROJECTION OR SEAM
WELDED LAP JOINTS.)
NF A89-210-1996 金属材料焊接的破坏试验.断裂试验.(欧洲标准EN 1320)
(DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS.
FRACTURE TEST. (EUROPEAN STANDARD EN 1320).)
NF A89-211-1996 金属材料焊接的破坏试验.焊接的低倍及显微检验(欧洲标准EN
1321) (DESTRUCTIVE TESTS ON WELDS IN METALLIC
MATERIALS. MACROSCOPIC AND MICROSCOPIC EXAMINATION
OF WELDS. (EUROPEAN STANDARD EN 1321).)
NF A89-220-1973 铝和铝合金.焊接.分类和焊接点的检验 (ALUMINIUM
AND ALLOY THEREOF. WELDING. CLASSIFICATION AND
TESTING OF WELDED JOINTS.)
NF A89-231-1992 钢的弧焊接头.质量缺陷等级导则 (ARC-WELDED
JOINTS IN STEEL. GUIDANCE ON QUALITY LEVELS
FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 25817).)
NF A89-232-1994 铝和可焊合金的弧焊接头.质量缺陷等级导则 (ARC-WELDED
JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS.
GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS.
(EUROPEAN STANDARD EN 30042).)
NF A89-233-1996 焊接.电子束和激光束焊接接头.缺陷的质量级别导则.第1部分:钢
(WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS.
GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS.
PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).)
NF A89-234-2001 焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金
(Welding - Electron and laser beam welded joints
- Guidance on quality levels for imperfections
- Part 2 : aluminium and its weldable alloys.)
NF A89-240-1987 焊接和有关技术.电阻点焊、凸焊或缝焊搭接接头.带解释的缺陷分类
(WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION
AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF
DEFECTS WITH EXPLANATORY COMMENTS.)
NF A89-250-1-1994 焊接的质量要求.金属材料的熔焊.第1部分:选择和使用导则
(Quality requirements for welding. Fusion welding
of metallic materials. Part 1 : guidelines for
selection and use.)
NF A89-250-2-1994 焊接的质量要求.金属材料的熔焊.第2部分:全面质量系统
(Quality requirements for welding. Fusion welding
of metallic materials. Part 2 : comprehensive
quality requirements.)
NF A89-250-3-1994 焊接的质量要求.金属材料的熔焊.第3部分:标准质量要求
(Quality requirements for welding. Fusion welding
of metallic materials. Part 3 : standard quality
requirements.)
NF A89-250-4-1994 焊接的质量要求.金属材料的熔焊.第4部分:基本质量要求
(Quality requirements for welding. Fusion welding
of metallic materials. Part 4 : elementary quality
requirements.)
NF A89-253-1996 焊接.预热温度、层间温度和预加热的维持温度测量导则 (Welding.
Guidance on the measurement of preheating temperature,
interpass temperature and preheat maintenance
temperature.)
NF A89-300-1996 焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 (WELDING.
GENERAL TOLERANCES FOR WELDED CONSTRUCTIONS.
DIMENSIONS FOR LENGTHS AND ANGLES. SHAPE AND
POSITION. (EUROPEAN STANDARD EN ISO 13920).)
NF A89-310-1973 铝和铝合金.焊接.基本元件的连接.选择原则 (ALUMINIUM
AND ALUMINIUM ALLOYS. WELDING. ELEMENTARY TYPES
OF ASSEHBLY. SELECTION CRITERIA.)
NF A89-420-2000 钎焊.钎焊接点的无损试验 (Brazing - Destructive
tests of brazed joints.)
NF A89-430-2000 钎焊.钎焊接头的无损检验 (Brazing - Non-destructive
examination of brazed joints.)
NF A89-500/A1-2003 焊接无损检验.金属材料的一般规则 (Non-destructive
examination of welds - General rules for metallic
materials.)
NF A89-510-1997 焊缝的无损检验.焊接接头的X射线照相检验 (Non-destructive
examination of welds. Radiographic examination
of welded joints.)
NF A89-510/A1-2003 焊接无损检验.焊接接头射线照相检验 (Non-destructive
examination of welds - Radiographic examination
of welded joints.)
NF A89-511-1998 焊缝的无损检验.焊接接头的X射线照相检验.验收等级 (Non-destructive
examination of welds. Radiographic examination
of welded joints. Acceptance levels.)
NF A89-511/A1-2003 焊缝的无损检验.焊接接头的X射线照相检验.验收水平
(Non-destructive examination of welds - Radiographic
examination of welded joints - Acceptance levels.)
NF A89-520-1997 焊缝的无损检验.焊接接头的超声波检验 (Non destructive
examination of welds. Ultrasonic examination
of welded joints.)
NF A89-520/A1-2002 焊缝的无损检验.焊接接头的超声波检验 (Non-destructive
testing of welds - Ultrasonic testing of welded
joints.)
NF A89-521-1997 焊缝的无损检验.焊接接头的超声波检验.验收等级 (Non
destructive examination of welds. Ultrasonic
examination of welded joints. Acceptance levels.)
NF A89-521/A1-2002 焊缝的无损检验.焊接接头的超声波检验.验收等级 (Non-destructive
testing of welds - Ultrasonic testing of welded
joints - Acceptance levels.)
NF A89-565-1987 焊接和相关工艺.电阻点焊和缝焊接缝的放射线检查.推荐实施规范
(Welding and allied processes. Radiographic
testing of resistance spot and seam welded joints.
Recommended practice.)
NF A89-567-2001 电阻点焊、滚焊和浮凸焊接机械剥离试验的程序和样品尺寸 (Specimen
dimensions and procedure for mechanized peel
testing resistance spot, seam and embossed projection
welds.)
NF A89-569-2001 电阻点焊和浮凸焊接十字形拉力试验的程序和样品尺寸 (Specimen
dimensions and procedure for cross tension testing
resistance spot and embossed projection welds.)
NF A89-574-2003 金属材料焊接的无损检验.电阻焊接.电阻缝焊的压力试验 (Destructive
test on welds in metallic materials - Resistance
welding - Pressure test on resistance seam welds.)
NF A89-575-2003 金属材料焊接的无损检验.测量δ铁素体用的取样方法 (Destructive
tests on welds in metallic materials - Method
for taking samples for delta ferrite measurement.)
NF A89-600-1998 焊接.金属材料的弧双端螺栓焊接(欧洲标准EN ISO 14555)
(WELDING. ARC STUD WELDING OF METALLIC MATERIALS.
(EUROPEAN STANDARD EN ISO 14555).)
NF A89-601-2001 焊接.金属材料的摩擦焊接 (Welding - Friction
welding of metallic materials.)
NF A89-700-1-2000 焊接.电子束焊接机的认可检验.第1部分:原则和认可条件
(Welding - Acceptance inspection of electron
beam welding machines - Part 1 : principles
and acceptance conditions.)
NF A89-700-2-2000 焊接.电子束焊接机的认可检验.第2部分:加速电压特性的测量
(Welding - Acceptance inspection of electron
beam welding machines - Part 2 : measurement
of accelerating voltage characteristics.)
NF A89-700-3-2000 焊接.电子束焊接机的认可检验.第3部分:电子束电流特性的测量
(Welding - Acceptance inspection of electron
beam welding machines - Part 3 : measurement
of beam current characteristics.)
NF A89-700-4-2000 焊接.电子束焊接机的认可检验.第4部分:焊接速度的测量
(Welding - Acceptance inspection of electron
beam welding machines - Part 4 : measurement
of welding speed.)
NF A89-700-5-2000 焊接.电子束焊接机的认可检验.第5部分:电子束放出精确度的测量
(Welding - Acceptance inspection of electron
beam welding machines - Part 5 : measurement
of run-out accuracy.)
NF A89-700-6-2000 焊接.电子束焊接机的认可检验.第6部分:焊点位稳定性的测量
(Welding - Acceptance inspection of electron
beam welding machines - Part 6 : measurement
of stabilitry of spot position.)
NF A89-701-1-2003 CO2激光切割、焊接机的验收试验.第1部分:通用原理和验收条件
(Acceptance tests for CO2-laser beam machines
for welding and cutting - Part 1 : general principles,
acceptance conditions.)
NF A89-701-2-2003 CO2激光切割、焊接机的验收试验.第2部分:静态和动态准确度的测定
(Acceptance tests for CO2-laser beam machines
for welding and cutting - Part 2 : measurement
of static and dynamic accuracy.)
NF A89-701-3-2003 CO2激光切割、焊接机的验收试验.第3部分:气体流量和压力测量仪的校准
(Acceptance tests for CO2-laser beam machines
for welding and cutting - Part 3 : calibration
of instruments for measurement of gas flow and
pressure.)
NF A89-750-1-2003 焊接.与焊接和相关工艺有关的底漆的试验.第1部分:一般要求
(Welding - Test for shop primers in relation
to welding and allied processes - Part 1 : general
requirements.)
NF A89-750-2-2003 焊接.与焊接和相关工艺有关的底漆的试验.第2部分:底漆的焊接特性
(Welding - Test for shop primers in relation
to welding and allied processes - Part 2 : welding
properties of shop primers.)
NF A89-750-3-2003 焊接.与焊接和相关工艺有关的底漆的试验.第3部分:热切割
(Welding - Test for shop primers in relation
to welding and allied processes - Part 3 : thermal
cutting.)
NF A89-750-4-2003 焊接.与焊接和相关工艺有关的底漆的试验.第4部分:烟气排放
(Welding - Test for shop primers in relation
to welding and allied processes - Part 4 : emission
of fumes and gases.)
NF A89-810-1-1999 热塑性半成品的焊接接头试验.第1部分:弯曲试验. (Testing
of welded joints of thermoplastics semi-finished
products - Part 1 : bend test.)
NF A89-810-3-2000 热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验.
(Testing of welded joints of thermoplastics
semi-finished products - Part 3 : tensile creep
test.)
NF A89-810-4-2002 热塑性半成品的焊接接头试验.第4部分:剥离试验 (Testing
of welded joints of thermoplastics semi-finished
products - Part 4 : peel test.)
NF A89-810-5-2000 热塑半成品焊接接头的试验.第5部分:宏观检验 (Testing
of welded joints of thermoplastics semi-finished
products - Part 5 : macroscopic examination.)
NF A89-810-7-2003 热塑性半成品焊接接头的试验.第7部分:腰形试验样品的抗拉试验
(Testing of welded joints of thermoplastics
semi-finished products - Part 7 : tensile test
with waisted test specimens.)
NF A89-810-8-2002 热塑性半成品的焊接接头试验.第8部分:要求 (Testing
of welded joints of thermoplastics semi-finished
products - Part 8 : requirements.)
NF A92-118-1993 搪瓷.搪瓷器皿耐碰撞测定.焊接工具试验 (VITREOUS
AND PORCELAIN ENAMELS. DETERMINATION OF THE
RESISTANCE OF ENAMELLED ARTICLES TO IMPACT.
PISTOL TEST.)
NF C20-758-1990 环境试验.试验方法.TD试验可钎焊性敷镀金属抗溶性和表面元件抗焊接热强度测定
(Environmental testing. Test methods. Test Td
: solderability, resistance to dissolution of
metallization and to soldering heat of surface
mounting devices (smd).)
NF C31-652-2001 特种绕组线规范.第2部分:带粘合层的可焊接的聚氨基甲酸乙酯漆包圆铜绕组线,130级
(Specifications for particular types of winding
wires - Part 2 : solderable polyurethane enamelled
round copper wire, class 130, with a bonding
layer.)
NF C31-654-2001 特种绕组线规范.第4部分:可焊接的聚氨基甲酸乙酯漆包圆铜绕组线130级
(Specifications for particular types of winding
wires - Part 4 : solderable polyurethane enamelled
round copper wire, class 130.)
NF C31-669-2001 特种绕组线规范.第19部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,130级
(Specifications for particular types of winding
wires - Part 19 : solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 130.)
NF C31-671-2001 特种绕组线规范.第21部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,155级
(Specifications for particular types of winding
wires - Part 21 : solderable polyurethane enamelled
round copper wire overcoated with polyamide,
class 155.)
NF C31-673-1995 特种绕组线规范.第23部分:可焊接的聚酰胺酯漆包圆铜绕组线,180级
(Specifications for particular types of winding
wires. Part 23 : solderable polyesterimide enamelled
round copper wire, class 180.)
NF C31-673/A1-2002 特种绕组线规范.第23部分:180类可焊接聚氨亚胺漆包圆铜线
(Specifications for particular types of winding
wires - Part 23 : solderable polyesterimide
enamelled round copper wire, class 180.)
NF C31-685-2001 特种绕组线规范.第35部分:155级带粘结层的可焊接聚氨酯漆包圆铜线
(Specifications for particular types of winding
wires - Part 35 : solderable polyurethane enamelled
round copper wire, class 155, with a bonding
layer.)
NF C31-686-2001 特种绕组线规范.第36部分:有粘结层的可焊接聚酰胺酯漆包圆铜绕组线.180级
(Specifications for particular types of winding
wires - Part 36 : solderable polyesterimide
enamelled round copper wire, class 180, with
a bonding layer.)
NF C31-701-2002 特种绕组线规范.第51部分:可焊接聚亚胺酯漆包圆铜线 (Specifications
for particular types of winding wires - Part
51 : solderable polyurethane enamelled round
copper wire, class 180.)
NF C46-512-1999 工业处理控制阀.第3-3部分:尺寸.对焊接的头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN
60534-3-3) (Industrial-process control valves.
Part 3-3 : dimensions. End-to-end dimensions
for buttweld, two-way, globe-type, straight
pattern control valves.)
NF C64-452-1992 充气高压开关和控制设备用锻铝和铸铝合金焊接复合外壳 (Welded
composite enclosures of cast and wrought aluminium
alloys for gas-filled high-voltage switchgear
and controlgear.)
NF C64-4521-1993 充气高压开关和控制设备用锻铝和铸铝合金焊接复合外壳.补充件1
()
NF C90-700-1-3-2002 电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料的要求
(Attachment materials for electronic assembly
- Part 1-3 : requirements for electronic grade
solder alloys and fluxed and non-fluxed solid
solders for electronic soldering applications.)
NF C90-703-1999 印刷电路板组件.第1部分:总规范.使用表面安装和相关装配技术的焊接电气和电子组件的要求
(Printed board assemblies - Part 1 : generic
specification - Requirements for soldered electrical
and electronic assemblies using surface mount
and related assembly technologies.)
NF C90-704-2000 印刷电路板组件.第2部分:分规范.表面安装焊接组件的要求
(Printed board assemblies - Part 2 : sectional
specification - Requirements for surface mount
soldered assemblies.)
NF C90-705-2000 印刷电路板组件.第3部分:分规范.通孔安装焊接组件的要求
(Printed board assemblies - Part 3 : sectional
specification - Requirements for through-hole
mount soldered assemblies.)
NF C90-706-1999 印刷电路板组件.第4部分:分规范.端点焊接组件的要求 (Printed
board assemblies - Part 4 : sectional specification
- Requirements for terminal soldered assemblies.)
NF C91-199-1997 电磁兼容性(EMC).第199部分:电弧焊接设备用产品标准
(Electromagnetic compatibility (EMC). Product
standard of arc welding equipment.)
NF C93-023-1998 无缝焊接.第2部分:无缝焊接卷边连接.一般要求.试验方法和特殊指南
(SOLDERLESS CONNECTIONS. PART 2 : SOLDERLESS
CRIMPED CONNECTIONS. GENERAL REQUIREMENTS, TEST
METHODS AND PRATICAL GUIDANCE. (EUROPEAN STANDARD
EN 60 352-2).)
NF C93-400-12-6-1997 电子设备用机电元件.基本试验过程和测量方法.第12部分:焊接试验.第6节:试验12f:防熔密封和机械焊接中的清洗
(Electromechanical components for electronic
equipment. Basic testing procedures and measuring
methods. Part 12 : soldering tests. Section
6 : test 12f : sealing against flux and cleaning
solvents in machine soldering.)
NF C93-406-4-107-2002 电子设备用连接器.第4-107部分:经质量评定的印制板连接器.固定部分有印制板用焊接和压入端子、活动部分有不
()
NF C93-472-6-1997 电子设备的电机元件.基本试验过程和测量方法.第12部分:焊接试验.第6节:试验12F:机械焊接过程中对液体和清洁
(ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC
EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING
METHODS. PART 12 : SOLDERING TESTS. SECTION
6 : TEST 12F : SEALING AGAINST FLUX AND CLEANING
SOLVENTS IN MACHINE SOLDERING. (EUROPEAN STANDARD
EN 60 512-12-6).)
NF C93-474-20-1997 电子设备用机电元件.基本试验规程和测量方法.第16部分:触点和终端机械试验.第20节:第15次试验:机械强度(无
()
NF E25-140-1994 紧固件.电弧焊接双端螺栓.符号SA.尺寸和物理化学特性.拉制电弧焊接螺栓系统
(FASTENERS. ARC WELDING STUDS LOADING. SYMBOL
SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL.
DRAWN ARC STUD WELDING SYSTEM.)
NF E25-418-1991 电阻焊接用六角形螺母.符号HSR紧固件 (FASTENERS.
RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.)
NF E26-010-1981 提升设备用焊接短环链和特短环链校准负载链条 (Welded
short-link and very short-link calibrated loading
chains used for lifting appliances.)
NF E26-011-1981 焊接短链校准或未校准负载链条 (Welded short-link
calibrated or non-calibrated loading chains.)
NF E26-012-1981 链焊接长环校准和未校准负载链 (WELDED LONG-LINK
CALIBRATED OR NON-CALIBRATED LOADING CHAINS.)
NF E26-020-1975 未校准未试验过的焊接圆钢环链 (Welded link
chain round steel non calibrated non tested.)
NF E27-801-1970 焊接杆 (WELD ROD WITH SCREWED END.)
NF E29-032-1985 工业管道.钢制构件.对焊接头.准备 (Industrial
pipework. Steel components. Butt welding ends.
Preparation.)
NF E29-251-1972 工业管道.不锈钢制焊接冲压凸缘（薄型系列）.公称压力１０
(STAMPED STAINLESS-STEEL FILLETS FOR WELDING
(THIN SERIES) PN 10)
NF E29-305-1999 工业阀门.钢阀门对缝焊接末端.(欧洲标准EN 12627)
(INDUSTRIAL VALVES. BUTT WELDING ENDS FOR STEEL
VALVES. (EUROPEAN STANDARD EN 12627).)
NF E29-591-1-1998 铜和铜合金.管道配件.第1部分:铜管毛细管终端焊接配件
(Copper and copper alloys. Plumbing fittings.
Part 1 : fittings with ends for capillary soldering
or capillary brazing to copper tubes.)
NF E29-600-1987 工业管道.钢制连接管和螺塞.插接式焊接连接管.螺纹连接管和螺塞
(Industrial pipework. Steel fittings and plugs.
Socket welding fittings.)
NF E29-736-1-2003 可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第1部分:碳钢
(Transportable gas cylinders - Refillable welded
steel gas cylinders - Design and construction
- Part 1 : carbon steel.)
NF E29-736-2-2003 可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第2部分:不锈钢
(Transportable gas cylinders - Reffilable welded
steel gas cylinders - Design and construction
- Part 2 : stainless steel.)
NF E29-745-2000 便携式气瓶.可再充气的便携式焊接铝合金气瓶的设计和结构规范
(Transportable gas cylinders - Specification
for the design and construction of refillable
transportable welded aluminium alloy gas cylinders.)
NF E48-064-4-2000 液压动力和一般应用的金属管连接.第4部分:由O型环焊接的24芯连接
(Metallic tube connections for fluid power and
general use - Part 4 : 24 o cone connectors
with O-ring weld-on nipples.)
NF E84-007-1998 栅栏用钢线和线制品.第4部分:钢线焊接网眼栅栏 (Steel
wire and wire products for fences. Part 4 :
steel wire welded mesh fencing.)
NF E84-010-2003 围栏用钢丝和钢丝制品.第7部分:围栏用钢丝焊接成的栅栏
(Steel wire and wire products for fences - Part
7 : steel wire welded panels for fencing.)
NF E86-050-1983 工业设备部件.机械焊接组件.通用公差 (INDUSTRIAL
INSTALLATIONS. MECHANICALLY WELDED UNITS. GENERAL
TOLERANCES.)
NF E86-253-1975 直径２０m以下立式圆筒形焊接贮槽.制造技术条件 (CYLINDRICAL
WELDED STORAGE TANKS WITH VERTICAL AXIS UP TO
20 M IN DIAMETER TECHNICAL CONDITIONS OF CONSTRUCTION.)
NF E86-256-1979 工业设备.焊接贮槽.一般特性 (INDUSTRIAL PLANTS.
WELDED TANKS. GENERAL REQUIREMENTS.)
NF E86-330-1978 卧式锅炉设备.焊接支架 (HORIZONTAL CYLINDRICAL
TANKS. WELDING SUPPORTS.)
NF F01-810-1990 铁路车辆.非合金钢或低合金钢电弧焊和电阻焊接头.设计与施工规则
(RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED
JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES
FOR CONCEPTION AND REALIZATION.)
NF F01-812-1-1990 铁路车辆.钢的电弧和电阻焊接接头.第1部分:对接焊和角接接头中缺陷验收准则
(RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED
JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA
FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.)
NF F01-812-2-1992 铁路滚动器材.钢的弧焊和电阻焊接.第2部分:电阻焊接缺陷的验收标准
(RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED
JOINTS OF STEELS. PART 2 : ACCEPTANCE CRITERIA
FOR DEFECTS IN ELECTRIC RESISTANCE WELDED JOINTS.)
NF F01-820-1992 铁路车辆.车身用铝合金焊接接头(焊缝) (RAILWAY
ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN
ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.)
NF F18-001-1988 铁路车辆.锰钢磨损板.特性.焊接规定 (ROLLING
STOCK. WEARING PLATES MADE OF MANGANESES STEEL.
CHARACTERISTICS. WELDING PRESCRIPTIONS.)
NF F19-351-1996 铁路车辆.连续涂覆焊接钢 (RAILWAY ROLLING
STOCK. CONTINUOUSLY WELDABLE PRIMER COATED SHEET
STEEL.)
NF F50-105-1992 铁路固定设备.钢轨铝热剂焊接.工作特性和验收 (RAILWAY
FIXED EQUIPMENT. THERMIT WELDING OF RAILS. WELDS
PERFORMED BY COMPAGNIES. PERFORMANCE AND ACCEPTANCE
CONDITONS OF WORKS.)
NF F50-106-1991 铁路固定设备.钢轨的热焊接.过程验收 (RAILWAY
FIXED EQUIPMENT. THERMIT WELDING OF RAILS. APPROVAL
OF A PROCESS.)
NF F82-001-1990 铁路车辆.车体框架用的可焊接铝合金线材 (RAILWAY
ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN
ALUMINIUM ALLOY FOR BODYWORK.)
NF J22-860-1993 造船工业.带钢管法兰的焊接舱壁件.PN6.PN10.PN16.PN20
(Shipbuilding. Welded bulkhead pieces with flanges
for steel pipework. Pn 6, PN10, PN 16, PN 20.)
NF J31-434-1948 造船工业.平甲板舱盖用螺旋松紧扣.带压紧垫片的焊接销 (SHIPBUILDING.
LOCKING HANDLES FOR ROUND FLAT HATCH COVERS.
WELDED BOLT WITH PACKING.)
NF L06-380-10-2003 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第10部分:一般要求
(Aerospace series - Welded and brazed assemblies
for aerospace constructions - Weldability and
brazeability of materials - Part 10 : general
requirements.)
NF L06-380-20-2003 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第20部分:均质铝及铝合金组件
(Aerospace series - Aerospace series - Welded
and brazed assemblies for aerospace constructions
- Weldability and brazeability of materials
- Part 20 : homogeneous assemblies aluminium
and aluminium al)
NF L06-380-21-2003 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第21部分:均质非合金及低合金钢组
(Aerospace series - Welded and brazed assemblies
for aerospace construction - Weldability and
beazability of materials - Part 21 : homgeneous
assemblies of unalloyed and low alloy steels.)
NF L06-383-1987 航空和航天制造用焊作和钎焊件.点焊和滚轮焊的电阻焊接件.焊件质量
(Welded and brazed assemblies for aerospace
constructions. Resistance spot or seam welded
assemblies. Quality of welded assemblies.)
NF L06-384-1988 航天工业构件用焊接和钎焊组件.摩擦焊接组件.焊接组件的质量
(WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE
CONSTRUCTIONS. FRICTION WELDED ASSEMBLIES. QUALITY
OF WELDED ASSEMBLIES.)
NF L06-385-1987 航空和航天制造用焊件和钎焊件.点焊和滚轮焊接机器.规范和分类的
(Welded and brazed assemblies for aerospace
constructions. Resistance spot or seam welding
machines. Qualification specifications.)
NF L06-386-1988 航天工业用焊接和钎焊组件.摩擦焊接机.合格规范 (WELDED
AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS.
FRICTION WELDING MACHINES. QUALIFICATION SPECIFICATIONS.)
NF L06-387-1991 航天结构用焊接和钎焊组装件.用电子束焊接金属材料组装件
(Weldments and brazements for aerospace structures.
Joints of metallic materials by electron beam
welding. Quality of weldments.)
NF L06-388-1991 航天结构用焊接和钎焊组装件.电子束焊接机.鉴定规程 (Welded
and brazed assemblies for aerospace constructions.
Electron beam welding machine. Qualification
specifications.)
NF L06-391-1994 航天结构用焊接和钎焊组装件.用扩散焊接法安装金属材料组装件.焊接组装件的质量
(WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE
CONSTRUCTION. ASSEMBLY OF METALLIC MATERIALS
CARRIED OUT BY DIFFUSION WELDING. QUALITY OF
WELDED ASSEMBLIES.)
NF L06-393-1995 航空和航天工业.航天结构用焊接和钎焊组装件.根据T.I.G进行加工处理的焊接机械.合格规范
(AIRCRAFT INDUSTRIE. WELDED AND SOLDERED ASSEMBLIES
FOR AEROSPACE CONSTRUCTIONS. WELDING MACHINE
ACCORDING TO T.I.G. PROCESS. SPECIFICATION FOR
QUALIFICATION.)
NF L06-394-1999 飞行器工业.航空与航天结构的焊接和钎焊. 用TIG方法的金属材料焊接组件.焊接质量
(AIRCRAFT INDUSTRIE. WELDMENTS AND BRAZEMENTS
FOR AEROSPACE STRUCTURES. ASSEMBLY OF METALLIC
MATERIALS WELDED BY TIG METHOD. QUALITY OF WELDMENTS.)
NF L07-158-1990 航天系列.焊接.图纸上的数据 (AEROSPACE SERIES.
WELDS. INFORMATION ON DRAWINGS. (EUROPEAN STANDARD
EN 2574).)
NF L12-811-2001 航空航天系列.钢焊接用焊棒和焊丝.直径0.5mm≥D≥5.0mm.尺寸
(Aerospace series - Filler rods and filler wires
for welding in steel - Diameter 0,5 mm inferior
or equal D inferior or equal 5,0 mm - Dimensions.)
NF L12-812-2002 航空航天系列.耐热合金焊接用填充杆材和填充金属丝.直径≥0.5mm
或者≤5.0mm .尺寸 (Aerospace series - Filler rods
and filler wires for welding in heat resisting
alloys - Diameter D more than or equal to 0,5
mm and less than or equal to 5,0 mm - Dimensions.)
NF L13-200-2001 航空航天系列.耐热合金NI-WH1801(NICR20Co18Ti3Al2).焊接用填充金属
(Aerospace series - Heat resisting alloy NI-WH1801
(NiCr20Co18Ti3Al2) - Filler metal for welding.)
NF L13-201-2001 航空航天系列.耐热合金NI-WH2301(NICR22Fe19Mo9Co2).焊接用填充金属
(Aerospace series - Heat resisting alloy NI-WH2301
(NiCr22Fe19Mo9Co2) - Filler metal for welding.)
NF L13-203-2001 航空航天系列.耐热合金NI-WH3601(NICR22Mo9Nb4).焊接用填充金属
(Aerospace series - Heat resisting alloy NI-WH3601
(NiCr22Mo9Nb4) - Filler metal for welding.)
NF L13-204-2001 航空航天系列.热阻合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接用金属焊料
(Aerospace series - Heat resisting alloy NI-WH1303
(NiCo20Cr20Mo5Ti2Al) - Filler metal for welding.)
NF L13-205-2001 航空航天系列.耐热合金CO-WH4101(CoCr20W15Ni).焊接用填充金属
(Aerospace series - Heat resisting alloy CO-WH4101
(CoCr20W15Ni) - Filler metal for welding.)
NF L13-206-2001 航空航天系列.耐热合金CO-WH1402(CoCr22Ni22W15).焊接用填充金属
(Aerospace series - Heat resisting alloy CO-WH1402
(CoCr22Ni22W15) - Filler metal for welding.)
NF L13-207-2002 航空航天系列.钢FE-WM3801(X5CrNiCu17-4).焊接用填充金属
(Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4)
- Filler metal for welding.)
NF L13-208-2002 航空航天系列.钢FE-WM1502(X11CrNiMoVN12-3).焊接用填充金属
(Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3)
- Filler metal for welding.)
NF L13-209-2001 航空航天系列.钛合金TI-W640001.焊接用填充金属
(Aerospace series - Titanium alloy TI-W64001
- Filler metal for welding.)
NF L13-210-2002 航空航天系列.钛合金TI-W19001.焊接用填充金属
(Aerospace series - Titanium alloy TI-W19001-
Filler metal for welding.)
NF L13-211-2001 航空航天系列.耐热合金NI-WD3201(NiMo25Fe6Cr5).焊接用填充金属
(Aerospace series - Heat resisting alloy NI-WD3201
(NiMo25Fe6Cr5) - Filler metal for welding.)
NF L13-212-2001 航空航天系列.耐热合金NI-WH3901(NiCr16Mo15).焊接用填充金属
(Aerospace series - Heat resisting alloy NI-WH3901
(NiCr16Mo15) - Filler metal for welding.)
NF L13-213-2002 航空航天系列.钢FE-WM1501 (X13CrNiMoCo12-3-2-2).
焊接用填充金属 (Aerospace series - Steel FE-WM1501
(X13CrNiMoCo12-3-2-2) - Filler metal for welding.)
NF L13-214-2002 航空航天系列.钢FE-WA4801(X6CrNiMnNb18-10).焊接用填充金属
(Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10)
- Filler metal for welding.)
NF L13-215-2002 航空航天系列.铝合金AL-W42201.焊接用填充金属.焊条
(Aerospace series - Aluminium alloy AL-W42201
- Filler metal for welding - Rod.)
NF L13-216-2001 航空航天系列.耐热合金NI-WH1302(NICR20Co13Mo4Ti3Al).焊接用填充金属.金属丝和金属杆
(Aerospace series - Heat resisting alloy NI-WH1302
(NiCr20Co13Mo4Ti3Al) - Filler metal for welding
- Wire and rod.)
NF L13-217-2001 航空航天系列.耐热合金CO-WH4102(CoCr28W20Ni5V1).焊接用填充金属.金属丝和金属杆
(Aerospace series - Heat resisting alloy CO-WH4102
(CoCr28W20Ni5V1) - Filler metal for welding
- Wire and rod.)
NF L13-218-2001 航空航天系列.耐热合金CO-WH1401(CoCr26Ni11W8).焊接用填充金属.金属丝和金属杆
(Aerospace series - Heat resisting alloy CO-WH1401
(CoCr26Ni11W8) - Filler metal for welding -
Wire and rod.)
NF L13-219-2002 航空航天系列.钢FE-WM1601 (X18CrWNi13-3-2).焊接填充金属.线材和棒材
(Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2)
- Filler metal for welding - Wire and rod.)
NF L13-220-2001 航空航天系列.耐热合金NI-WH0001 (NiCr20).焊接用填充金属.焊丝和焊棒
(Aerospace series - Heat resisting alloy NI-WH0001
(NiCr20) - Filler metal for welding - Wire and
rod.)
NF L13-221-2002 航空航天系列.钢FE-WA4802 (X8CrNiMn27-22-2).焊接填充金属.线材和棒材
(Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2)
- Filler metal for welding - Wire and rod.)
NF L13-222-2002 航空航天系列.钢FE-WL1804 (25CrMnMo4-2-2).焊接填充金属.线材和棒材
(Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2)
- Filler metal for welding - Wire and rod.)
NF L13-223-2002 航空航天系列.钢FE-WL1805 (8CrMnMo12-4-9).焊接填充金属.线材和棒材
(Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9)
- Filler metal for welding - Wire and rod.)
NF L13-224-2002 航空航天系列.钢 FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2).焊接填充金属.线材和棒材
(Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2)
- Filler metal for welding - Wire and rod.)
NF L13-225-2002 航空航天系列.钢FE-WL1806 (15CrMnMoV5-4-9-3).
焊接用填充金属.焊丝和焊条 (Aerospace series - Acier FE-WL1806
(15CrMnMoV5-4-9-3) - Filler metal for welding
- Wire and rod.)
NF L13-226-2002 航空航天系列.钢FE-WA2602 (X4NiCrTiMoV26-15).
焊接用填充金属.焊丝和焊条 (Aerospace series - Steel FE-WA2602
(X4NiCrTiMoV26-15) - Filler metal for welding
- Wire and rod.)
NF L13-227-2002 航空航天系列.钢FE-WA3801 (X4CrNiMn20-10-2).
焊接用填充金属.焊丝和焊条 (Aerospace series - Steel FE-WA3801
(X4CrNiMn20-10-2) - Filler metal for welding
- Wire and rod.)
NF L13-228-2001 航空航天系列.耐热合金NI-WH8901(NICR16Ti3Mn2).焊接用填充金属.金属丝和金属杆
(Aerospace series - Heat resisting alloy NI-WH8901
(NiCr16Ti3Mn2) - Filler metal for welding -
Wire and rod.)
NF L13-229-2001 航空航天系列.耐热合金NI-WH3902 (NICR25Mo10C).焊接用填充金属.焊丝和焊棒
(Aerospace series - Heat resisting alloy NI-WH3902
(NiCr25Mo10C) - Filler metal for welding - Wire
and rod.)
NF L13-230-2001 航空航天系列.耐热合金CO-WH4001(CoCr29W9).焊接用填充金属.金属丝和金属杆
(Aerospace series - Heat resisting alloy CO-WH4001
(CoCr29W9) - Filler metal for welding - Wire
and rod.)
NF L13-231-2002 航空航天系列.镁合金钢MG-W68001. 焊接用填充金属.焊丝和焊条
(Aerospace series - Magnesium alloy MG-W68001
- Filler metal for welding - Wire and rod.)
NF L13-232-2001 航空航天系列.铝合金AL-W46431.焊接用填充金属.金属丝和金属杆
(Aerospace series - Aluminium alloy AL-W46431
- Filler metal for welding - Wire and rod.)
NF L13-233-2001 航空航天系列.钛TI-W99001.焊接用填充金属.金属丝和金属杆
(Aerospace series - Titanium TI-W99001 - Filler
metal for welding - Wire and rod.)
NF L13-234-2002 航空航天系列.钢FE-WM1001 (X13Cr12).
焊接用填充金属.焊丝和焊条 (Aerospace series - Steel FE-WM1001
(X13Cr12) - Filler metal for welding - Wire
and rod.)
NF L13-235-2001 航空航天系列.钢FE-WM1002(X13Cr13).焊接用填充金属.金属丝和金属杆
(Aerospace series - Steel FE-WM1002 (X13Cr13)
- Filler metal for welding - Wire and rod.)
NF L15-811-2002 航空航天系列.焊接钛和钛合金用填充杆和填充焊丝.直径 D≥0.5mm
和D≤5.0mm .尺寸 (Aerospace series - Filler rods
and filler wires for welding in titanium and
titanium alloys - Diameters D more than or equal
to 0,5 mm and less than or equal to 5,0 mm -
Dimensions.)
NF L43-353-2002 航空航天系列.管联接器8°30'.金属包头焊接用动态梁密封端.几何构型
(Aerospace series - Pipe coupling 8 o30' - Dynamic
beam seal end for ferrule, welded - Geometric
configuration.)
NF L43-354-2002 航空航天系列.管联接器8°30'.焊接的联接器端部.几何构型
(Aerospace series - Pipe coupling - Coupling
ends, welded - Geometric configuration.)
NF L43-361-2002 航空航天系列. 8°30'钛合金管连接件.带动态梁密封端的焊接卡套
(Aerospace series - Pipe couplings 8 o30' in
titanium alloy - Ferrules, welded, with dynamic
beam seal end.)
NF L43-372-2002 航空航天系列.8°30'钛合金管联接件.90°弯头焊接端
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Elbows 90 o welded end.)
NF L43-373-2002 航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头焊接端
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Elbows 90 o, welded end with
thrust wire nut.)
NF L43-375-2002 航空航天系列.8°30'钛合金管联接件.隔离直通90°弯头焊接端
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Elbows 90 o, bulkhead, welded
end.)
NF L43-377-2002 航空航天系列. 8°30'钛合金管联接件.带推进线螺母的45°焊接端
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Elbows 45 o welded end with
thrust wire nut.)
NF L43-385-2002 航空航天系列.8°30'钛合金管联接件.焊接卡套用螺母
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Nut for welded ferrule.)
NF L43-388-2002 航空航天系列.8°30'钛合金管联接件.带动态粱密封端的端部焊接减径的卡套
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Ferrules with dynamic beam
seal end, welded and reduced at pipe end.)
NF L43-391-2002 航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头焊接端
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Unions, bulkhead, long, welded
end.)
NF L43-393-2002 航空航天系列.钛合金管联接器8°30'.弯管90度焊接端
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Elbows 90 o welded ends.)
NF L43-394-2002 航空航天系列.钛合金管联接器8°30'.弯管45度焊接端
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Elbows 45 o welded ends.)
NF L43-398-2002 航空航天系列.8°30'钛合金管联接件.长焊接端的90°弯头隔壁直通
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Elbows 90 o bulkhead, welded
end long.)
NF L43-406-2002 航空航天系列.钛合金管联接器8°30'.检修用带动态梁密封端的焊接金属包头
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Ferrules, welded with dynamic
beam seal end, for repair.)
NF L43-407-2002 航空航天系列.钛合金管联接器8°30'.检修用焊接端部的闷头管接头
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Unions, bulkhead welded end,
for repair.)
NF L43-408-2002 航空航天系列.钛合金管联接器8°30'.检修用长的焊接端部的闷头管接头
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Unions, bulkhead long welded
end, for repair.)
NF L43-409-2002 航空航天系列.钛合金管联接器8°30'.检修用焊接端加螺纹的管接头
(Aerospace series - Pipe coupling 8 o30' in
titanium alloy - Unions, welded end threaded
for repair.)
NF L43-613-2003 航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计构型.英制
(Aerospace series - Pipe coupling, in heat resisting
steel or in heat resisting nickel alloy - Coupling
end, welded - Design configuration - Inch series.)
NF L43-619-2003 航空航天系列.耐热钢制37度管接头.焊接端直通接管头.英制
(Aerospace series - Pipe couplings, 37 o, spherical,
in heat resisting steel - Straight nipples,
welded end - Inch series.)
NF L43-622-2003 航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接的螺纹直活管节
(Aerospace series - Pipe couplings, 60 o, spherical,
in titanium alloy TI-P64001 - Straight unions,
welded, threaded.)
NF L43-624-2003 航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接箍
(Aerospace series - Pipe couplings, 60 o, spherical,
in titanium alloy TI-P64001 - Ferrules, welded.)
NF L43-627-2003 航空航天系列.60度钛合金TI-P64001球形管接头.焊接的90度弯头
(Aerospace series - Pipe couplings, 60 o, spherical,
in titanium alloy TI-P64001 - Elbows 90 o, welded.)
NF L43-629-2003 航空航天系列.耐热钢制37度球形管接头.端部焊接的90度弯管接头.英制
(Aerospace series - Pipe coupling, 37 o, spherical,
in heat resisting steel - Elbow 90 o nipples,
welded end - Inch series.)
NF L43-631-2003 航空航天系列.耐热钢制37度球形管接头.端部焊接的箍.英制
(Aerospace series - Pipe coupling, 37 o, spherical,
in heat resisting steel - ferrules, welded end
- Inch series.)
NF L43-633-2003 航空航天系列.耐热钢制37度球形管接头.端部焊接的三通接头.英制
(Aerospace series - Pipe coupling, 37 o, spherical,
in heat resisting steel - Tees nipples, welded
end - Inch series.)
NF L43-635-2003 航空航天系列.耐热钢制焊接管接头.90度弯头.英制 (Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Elbows 90 o - Inch series.)
NF L43-636-2003 航空航天系列.耐热钢制焊接管接头.减速器.英制 (Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Reductors - Inch series.)
NF L43-637-2003 航空航天系列.耐热钢制焊接管接头.三通管.英制 (Aerospace
series - Pipe coupling, welded, in heat resisting
steel - Tees - Inch series.)
NF L46-342-2002 航空航天系列.焊接管用钛合金三通垫环 (Aerospace
series - T-ring fillers in titanium alloy for
welding pipes - 14 000 kPa nominal pressure.)
NF L46-343-2002 航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压
(Aerospace series - T-ring fillers in titanium
alloy for welding pipes - 28 000 kPa nominal
pressure.)
NF L54-002-082-2002 航空航天系列.电气和光学连接的元件.试验方法.第514部分:自带焊料和助熔剂(材料)接触片的可焊接性
(Aerospace series - Elements of electrical and
optical connection - Test methods - Part 514
: solderability of contacts with self-contained
solder and flux.)
NF M50-022-2000 燃气供应系统.焊接钢管线.功能要求 (Gas supply
systems - Welding steel pipework - Functional
requirements.)
NF M62-301-2-1997 密封罩用组件.第2部分:机械手和遥控操作抓手用手套,焊接袋,鞋罩
(Components for containment enclosures. Part
2 : gloves, welded bags, gaiters for remote-handling
tongs and for manipulators.)
NF M87-400-1984 石油工业.带外部杆和螺栓盖的钢制阀门.法兰或焊接端点ＩＳＯＰＮ２０．ＩＳＯＰＮ４２０
(Petroleum industry. Steel gate valves with-on
flanges and joints. ISO PN 20 to ISO PN 420.)
NF M88-703-1988 液态烃分配装置.商品丁烷和丙烷焊接钢瓶.构造.试验.设备
(Equipment for the distribution of liquefied
hydrocarbons. Welded steel cylinders for commercial
butane and propane. Construction. Tests. Fittings.)
NF M88-712-1998 液化天然气(GPL)用可移动多次装填的焊接钢瓶.设计和结构
(Transportable refillable welded steel cylinders
for liquefied petroleum gas (GPL). Design and
construction.)
NF M88-712/A1-2002 液化天然气(GPL)用可移动多次装填的焊接钢瓶.设计和结构
(Transportable refillable welded steel cylinders
for Liquefied Petroleum Gas (LPG) - Design and
construction.)
NF M88-713-1996 液化石油气(LPG)用适于再装的可运输焊接钢瓶.装填前、装填中及装填后的检查程序
(Transportable refillable welded steel cylinders
for liquefied petroleum gas (lpg). Procedure
for checking before, during and after filling.)
NF M88-714-1996 液化石油气(LPG)用适于再装的可运输焊接钢瓶.周期性再鉴定(欧洲标准EN
1440) (TRANSPORTABLE REFILLABLE WELDED STEEL
CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG).
PERIODIC REQUALIFICATION. (EUROPEAN STANDARD
EN 1440).)
NF M88-716-2002 液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产 (Welded
steel tanks for liquefied petroleum gas (LPG)
- Road tankers - Design and manufacture.)
NF M88-717-2002 地面装置用体积小于13 m3的液化石油气(LPG)储存用系列焊接钢罐产品.设计和生产
(Static welded steel cylindrical tanks, serially
produced for the storage of Liquefied petroleum
gas (LPG) having a volume not greater than 13
m3 and for installation above ground - Design
and manufact)
NF M88-728-2003 液化石油气用(LPG)可运输可再填充焊接铝瓶.设计和结构
(Transportable refillable welded aluminium cylinders
for liquefied petroleum gas (LPG) - Design and
construction.)
NF P12-603-2000 圬工辅助成份的试验方法.第3部分:预制床连接处增强的焊接剪切负载容量的测定
(Methods of test for ancillary components for
masonry - Part 3 : determination of shear load
capacity of welds in prefabricated bed joint
reinforcement.)
NF P16-325-1-1999 废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第1部分:要求,试验和质量控制(EN1123-1)
(Pipes and fittings of longitudinally welded
hot-dip galvanized steel pipes with spigot and
socket for waste water systems. Part 1 : requirements,
testing, quality control.)
NF P16-325-2-1999 废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第2部分:尺寸(EN1123-2)
(Pipes and fittings of longitudinally welded,
hot-dip galvanized steel pipes with spigot and
socket for waste water systems. Part 2 : dimensions.)
NF P16-326-1-1999 废水系统用带套管的纵向焊接不锈钢管的管和配件.第1部分:要求、试验和质量控制
(Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems. Part 1 : requirements,
testing, quality control.)
NF P16-326-2-1999 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统S.尺寸
(Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems. Part 2 : systems S.
Dimensions.)
NF P16-326-3-1999 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统X.尺寸
(Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems. Part 3 : system X.
Dimensions.)
NF P19-108-1998 开式结构高压蒸氧加气混凝土或轻集料混凝土预制件用钢筋网或组架焊接接缝剪切强度的测定
(Determination of shear strength of welded joints
of reinforcement mats or cages for prefabricated
components made of autoclaved aerated concrete
or lightweight aggregate concrete with open
structure.)
NF P22-250-1978 金属结构件.圆形空心型材交叉切割焊接件.焊接件设计和鉴定
(METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR
HOLLOW SECTIONS. DESIGN AND INSPECTION.)
NF P22-251-1978 金属结构件.圆形空心型材交叉切割焊接件.构造规定 (METAL
STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW
SECTIONS.CONSTRUCTION.)
NF P22-252-1978 金属结构件.圆形空心型材焊接件 (METAL STRUCTURES.
WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.)
NF P22-255-1979 金属结构件.圆形或矩形空心型材I或H型焊接件.设计和检验
(METAL CONSTRUCTION. HOLLOW SECTION WELDED ASSEMBLIES
ON TYPE I AND H SECTIONS. DESIGN AND VERIFICATION.)
NF P22-258-1982 金属结构件.静态负荷下空心型材和矩形空心型材焊接件.设计和检验
(WELDED ASSEMBLIES OF HOLLOW SECTIONS AND RECTANGULAR
HOLLOW SECTIONS SUBJECTED TO STATIC LOADING.
DESIGN AND VERIFICATION.)
NF P22-470-1989 金属结构.静负荷焊接连接.结构规定和焊接检验 (STEEL
CONSTRUCITON. WELDED CONNECTIONS. DETAILS AND
DESIGN OF WELDS.)
NF P22-471-1984 金属结构.焊接连接.制造 (Metallic construction.
Welded joints. Fabrication.)
NF P22-473-1986 金属结构.焊接连接.无损检验范围 (METAL CONSTRUCTION.
WELDED ASSEMBLIES. RANGES OF NON DESTRUCTIVES
CONTROL.)
NF P24-505-2000 门窗制造用未增塑聚氯乙烯型材.焊接弯头和T接头强度的测定
(Unplasticized polyvinylchloride (PVC-U) profiles
for the fabrication of windows and doors - Determination
of the strength of welded corners and T-joints.)
NF P36-403-1989 排雨水用轧制焊接锌管 (RAINWATER GOODS.
METALLIC PIPES,ALBOWS AND HEADS. SPECIFICATIONS.)
NF P37-408-1947 屋顶附件.巴黎框“式焊接或铆接板制屋顶排水框架.术语.尺寸
(ROOF SKYLIGHT RACK-MOUNTED WITH DRIP MOULDING
KNOWN IN FRANCE AS “PARISIAN-TYPE“ OF WELDED
OR RIVETED STEEL. TERMINOLY. DIMENSIONS.)
NF P94-115-1990 地质工程学.土地.勘测和试验.B型动力钻入的焊接 (SOILS
INVESTIGATION AND TESTING. IN SITU TESTS. DYNAMIC
PENETRATION B TIP.)
NF S75-509-2002 焊接人员用防护手套 (Protective gloves
for welders.)
NF S77-104-2003 人眼防护.焊接及有关技术用滤光镜.透射要求和推荐使用方法
(Personal eye-protection - Filters for welding
and related techniques - Transmittance requirements
and recommended use.)
NF S77-113-2004 人员的眼睛保护.自动焊接滤光镜 (Personal eye-protection
- Automatic welding filters.)
NF T47-220-2003 气焊机.焊接、切割和相关工艺用橡胶软管 (Gas welding
equipment - Rubber hoses for welding, cutting
and allied processes.)
NF T47-221-1996 气焊设备.焊接和相关工艺用热塑管 (Gas welding
equipment. Thermoplastic hoses for welding and
allied processes.)
NF T54-119-1976 塑料.增塑聚氯乙烯塑料薄膜.高频焊接试验常规方法 (PLASTICS.PLASTICIZED
PVC SHEETS. CONVENTIONAL TEST METHOD FOR HIGH
FREQUENCY WELDING.)
NF T54-120-1976 塑料.薄膜.热焊接试验常规方法（热棒法） (PLASTICS.
SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL
WELDING. (HOT BAR METHOD.))
NF T54-412-2000 焊接热塑结构的特性值.热塑性设备设计用允许应力和模数的测定
(Characteristic values for welded thermoplastics
constructions - Determination of allowable stresses
and moduli for design of thermoplastic equipment.)
NF T58-202-1-2000 焊接固定常压热塑性槽罐.第1部分:总则 (Welded
static non-pressurised thermoplastic tanks -
Part 1 : general principles.)
NF T58-202-2-2000 焊接固定常压热塑性槽罐.第2部分:立式圆柱形槽罐的计算
(Welded static non-pressurised thermoplastic
tanks - Part 2 : calculation of vertical cylindrical
tanks.)
NF T58-202-3-2000 焊接固定常压热塑性槽罐.第3部分:单层壁的长方形槽罐的设计和计算
(Welded static non-pressurised thermoplastic
tanks - Part 3 : design and calculation for
single skin rectangular tanks.)
NF T58-202-4-2000 焊接固定常压热塑性槽罐.第4部分:法兰连接的设计和计算
(Welded static non-pressurised thermoplastic
tanks - Part 4 : design and calculation of flanged
joints.)
|
管件知识
