国内外钢铁标准
iron and steel standards
德国钢铁标准(DIN)
DIN 17014 Bb.2-1961 钢铁的热处理；技术术语的外语翻译 Heat treating
of iron and steel; translations of technical
terms into foreign languages
DIN 17022-2-1986 钢铁材料热处理.热处理方法.第2部分:工具的淬火和回火
Heat treatment of ferrous materials; heat treatment
methods; hardening and tempering of tools
DIN 17014-3-1976 钢铁材料的热处理.第3部分:热处理工艺指示标记 Heat
treatment of ferrous materials; notation to
indicate heat treatment processes
DIN 4000-23-1988 第23部分:钢铁用物品特性表格设计 Tabular layouts
of article characteristics for iron and steel
DIN 17022-3-1989 钢铁材料热处理.热处理方法.第3部分:表面硬化处理 Heat
treatment of ferrous materials; heat treatment
methods; case hardening
DIN EN 10136-1990 黑色金属材料的化学分析.钢铁中镍含量的测定.火焰原子吸收分光光度测定法
Chemical analysis of ferrous materials; determination
of nickel in steel and iron; flame atomic absorption
spectrometric method; German version EN 10136:1989
DIN EN 10188-1990 黑色金属材料的化学分析.钢铁中铬的测定.火焰原子吸收光谱测定法
Chemical analysis of ferrous materials; determination
of chromium in steels and iron; flame atomic
absorption spectrometric method; German version
EN 10188:1989
DIN EN 10052-1994 钢铁产品热处理术语词汇 Vocabulary of
heat treatment terms for ferrous products; German
version EN 10052:1993
DIN EN 10211-1996 钢铁材料化学分析.钢和铁中钛含量测定.火焰原子吸收光谱测定法
Chemical analysis of ferrous materials - Determination
of titanium in steel and iron - Flame atomic
absorption spectrometric method; German version
EN 10211:1995
DIN EN ISO 1460-1995 金属镀层.钢铁材料的热浸镀锌涂层.用重量测定法测定单位面积重量
(ISO 1460:1992); 德文版本 EN ISO 1460:1 Metallic
coatings - Hot dip galvanized coatings on ferrous
materials - Gravimetric determination of the
mass per unit area (ISO 1460:1992); German version
EN ISO 1460:1994
DIN EN 10021-1993 钢铁制品的一般交货技术条件; 德文版本 EN 10021:1993
General technical delivery requirements for
steel and iron products; German version EN 10021:1993
DIN 17022-1-1994 钢铁材料热处理.热处理方法.第1部分:部件的硬化处理、奥氏回火、退火、淬火、回火
Heat treatment of ferrous materials - Methods
of heat treatment - Part 1: Hardening, austempering,
annealing, quenching, tempering of components
DIN EN 10212-1995 钢铁材料的化学分析.用分光光度法测定钢铁中砷的含量;
德文版本 EN 10212:1995 Chemical analysis of ferrous
materials - Determination of arsenic in steel
and iron - Spectrophotometric method; German
version EN 10212:1995
DIN EN 10276-1-2000 铁素体材料的化学分析.钢铁中氧含量的测定.第1部分:氧测定用钢样品的取样和制备
Chemical analysis of ferrous materials - Determination
of oxygen in steel and iron - Part 1: Sampling
and preparation of steel samples for oxygen
determination; German version EN 10276-1:2000
DIN 17022-4-1998 钢铁材料热处理.热处理方法.第4部分:渗氮和硝基渗碳
Heat treatment of ferrous materials - Methods
of heat treatment - Part 4: Nitriding and nitrocarburizing
DIN EN 12330-2000 金属腐蚀防护 .钢铁上的镉电镀层 Corrosion
protection of metals - Electrodeposited coatings
of cadmium iron or steel; German version EN
12330:2000
DIN 6663-1999 气动管系统.塑料(PVC),钢铁,和不锈钢气动管系统部件的制造工艺
Pneumatic tube systems - Workmanship of components
for pneumatic tube systems in plastics (PVC-U),
ferrous steel and stainless steel
DIN 17022-5-2000 钢铁材料热处理.热处理方法.第5部分:表面淬火 Heat
treatment of ferrous materials - Methods of
heat treatment - Part 5: Surface hardening
DIN 50965-2000 电镀层.钢铁和铜及铜合金锡镀层 Electroplated
coatings - Tin-coatings on iron steel and on
copper and copper alloys
DIN 50961-2000 电镀层.钢铁材料的镀锌层.术语、试验和耐腐蚀 Electroplated
coatings - Zinc coatings on iron and steel -
Terms, testing and corrosion resistance
DIN EN ISO 9556-2002 钢铁.含碳总量的测定.感应电炉燃烧后的红外线吸收法
(ISO 9556:1989); 德文版本 EN ISO 9556:2001 Steel
and iron - Determination of total carbon content
- Infrared absorption method after combustion
in an induction furnace (ISO 9556:1989); German
version EN ISO 9556:2001
DIN EN ISO 3690-2001 焊接及相关工艺.钢铁电弧焊接金属中氢含量的测定
Welding and allied processes - Determination
of hydrogen content in ferritic arc weld metal
(ISO 3690:2000); German version EN ISO 3690:2000
DIN 6773-2001 钢铁材料热处理.热处理件.图样画法及标注. Heat treatment
of ferrous metals - Heat treated parts, presentation
and indications on drawings
DIN EN 10304-2001 继电器磁性材料(钢铁) Magnetic materials
(iron and steel) for use in relays; German version
EN 10304:2001
DIN EN 10306-2002 钢铁.带平行法兰和IPE梁的工字梁的超声波试验; 德文版本
EN 10306:2001 Iron and steel - Ultrasonic testing
of H beams with parallel flanges and IPE beams;
German version EN 10306:2001
DIN EN ISO 14284-2003 钢铁.化合物样品取样和制备方法 Steel
and iron - Sampling and preparation of samples
for the determination of chemical composition
(ISO 14284:1996); German version EN ISO 14284:2002
DIN EN 10276-2-2003 钢铁材料的化学分析.钢铁中氧含量的测定.第2部分:在惰性气体中熔解后的红外法
Chemical analysis of ferrous materials - Determination
of oxygen content in steel and iron - Part 2:
Infrared method after fusion under inert gas;
German version EN 10276-2:2003
DIN EN 10328-2005 钢铁.表面加热后常规淬硬深度的测定 Iron and
steel - Determination of the conventional depth
of hardening after surface heating; German version
EN 10328:2005
DIN EN 10184-2006 黑色金属材料的化学分析.非合金钢铁中磷测定.钼兰分光光度测量法
Chemical analysis of ferrous materials - Determination
of phosphorus in non-alloyed steels and irons
- Molybdenum blue spectrophotometric method;
German version EN 10184:2006
DIN 1581-1977 棒钢材.链节带用型钢.尺寸.重量 Steel Bars; Hinge
Strip Profiles; Dimensions, Weights
DIN 17021-1-1976 黑色金属的热处理.第1部分:材料选择.根据淬硬性的钢材选择
Heat Treatment of Ferrous Metals; Material Selection;
Steel Selection according to Hardenability
DIN EN 10178-1990 黑色金属材料的化学分析.钢材中铌含量的测定.分光光度分析法
Chemical analysis of ferrous materials; determination
of niobium in steels; spectrophotometric method;
german version EN 10178:1989
DIN 50959-1982 电镀层.铁和钢材料的电镀层在不同气候条件下的耐腐蚀能力 Electrodeposited
coatings; corrosive resistance of electrodeposited
coatings on iron and steel under different climatic
conditions
DIN 17115-1987 焊接的圆形钢链用钢材.交付技术状态 Steels for
welded round link chains; technical delivery
conditions
DIN EN 27963-1992 钢材的焊接点.焊接点超声波检验用的2号校准试样块 Welds
in steel; calibration block No. 2 for ultrasonic
examination of welds (ISO 7963:1985); german
version EN 27963:1992
DIN EN ISO 11126-8-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第8部分:橄榄石沙
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 8: Olivine sand (ISO 11126-8:1993); German
version EN ISO 11126-8:1997
DIN EN ISO 11127-2-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第2部分:粒度分布测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 2: Determination of particle size distribution
(ISO 11127-2:1993); German version EN ISO 11127-2:1997
DIN EN ISO 11127-3-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第3部分:表观密度的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 3: Determination of apparent density (ISO
11127-3:1993); German version EN ISO 11127-3:1997
DIN EN ISO 11127-4-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第4部分:通过玻璃划痕试验评定硬度
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 4: Assessment of hardness by a glass slide
test (ISO 11127-4:1993); German version EN ISO
11127-4:1997
DIN EN ISO 11127-5-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第5部分:含水量测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 5: Determination of moisture (ISO 11127-5:1993);
German version EN ISO 11127-5:1997
DIN EN ISO 11127-6-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第6部分:通过测量电导率测定水溶性杂质
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 6: Determination of water-soluble contaminants
by conductivity measurement (ISO 11127-6:1993);
German version EN ISO 11127-6:1997
DIN EN ISO 11127-7-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第7部分:水溶性氯化物的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 7: Determination of water soluble chlorides
(ISO 11127-7:1993); German version EN ISO 11127-7:1997
DIN EN ISO 11125-1-1997 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第1部分:取样
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
1: Sampling (ISO 11125-1:1993); German version
EN ISO 11125-1:1997
DIN EN ISO 11125-2-1997 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第2部分:粒度分布测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
2: Determination of particle size distribution
(ISO 11125-2:1993); German version EN ISO 11125-2:1997
DIN EN ISO 11125-3-1997 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第3部分:硬度测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
3: Determination of hardness (ISO 11125-3:1993);
German version EN ISO 11125-3:1997
DIN EN ISO 11125-4-1997 使用涂料及相关产品前钢材的预处理.喷丸金属磨料试验方法.第4部分:表观密度测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
4: Determination of apparent density (ISO 11125-4:1993);
German version EN ISO 11125-4:1997
DIN EN ISO 11125-5-1997 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第5部分:有缺陷颗粒百分比和微结构的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
5: Determination of percentage defective particles
and of microstructure (ISO 11125-5:1993); German
version EN ISO 11125-5:1997
DIN EN ISO 11125-6-1997 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第6部分:外来杂质的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
6: Determination of foreign matter (ISO 11125-6:1993);
German version EN ISO 11125-6:1997
DIN EN ISO 11125-7-1997 使用涂料及相关产品前钢材的预处理.喷丸金属磨料试验方法.第7部分:含水量测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
7: Determination of moisture (ISO 11125-7:1993);
German version EN ISO 11125-7:1997
DIN EN ISO 11126-6-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第6部分:炼铁炉渣
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 6: Iron furnace slag (ISO 11126-6:1993);
German version EN ISO 11126-6:1997
DIN EN ISO 8501-1 Bb.1-2002 使用涂料和相关产品前钢基材预处理.表面清洁度目视评定.对第1部分的参考性补充:不同磨料喷射清洁造成钢材表
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Informative supplement
to Part 1: Representative photographic examples
of the change of appearance imparted to steel
when blast-cleaned with different abrasives
(ISO 8501-1:1988/Suppl:1994); German version
EN ISO 8501-1:2001/Supplement:2001 (Endorsement
of EN ISO 8501-1:2001/Supplement:2001)
DIN EN ISO 8501-1-2002 使用涂料和相关产品前钢基材预处理.表面清洁度目视评定.第1部分:未涂覆和彻底清除原有涂层后钢材的锈蚀等级
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Part 1: Rust grades
and preparation grades of uncoated steel substrates
and of steel substrates after overall removal
of previous coatings (ISO 8501-1:1988); German
version EN ISO 8501-1:2001 (Endorsement of EN
ISO 8501-1:2001 as German Standard)
DIN EN 10089-2003 淬火和回火弹簧用热轧钢材.交货技术条件 Hot rolled
steels for quenched and tempered springs - Technical
delivery conditions; German version EN 10089:2002
DIN EN ISO 11126-9-2005 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第9部分:十字石
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 9: Staurolite (ISO 11126-9:1999); German
version EN ISO 11126-9:2004
DIN EN ISO 8502-8-2005 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第8部分:水分的现场折射测定方法
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 8:
Field method for the refractometric determination
of moisture (ISO 8502-8:2001); German version
EN ISO 8502-8:2004
DIN EN ISO 8503-5-2005 涂装油漆和有关产品前钢材预处理.喷砂清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法
Preparation of steel substrates before application
of paints and related products - Surface roughness
characteristics of blast-cleaned steel substrates
- Part 5: Replica tape method for the determination
of the surface profile (ISO 8503-5:2003); German
version EN ISO 8503-5:2004
DIN EN ISO 8502-12-2005 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第12部分:水溶性铁离子的现场滴定测定方法
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 12:
Field method for the titrimetric determination
of water-soluble ferrous ions (ISO 8502-12:2003);
German version EN ISO 8502-12:2004
DIN EN ISO 8502-5-2005 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第5部分:涂装前钢材表面上氯化物测定(离子探测管法)
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 5:
Measurement of chloride on steel surfaces prepared
for painting (ion detection tube method) (ISO
8502-5:1998); German version EN ISO 8502-5:2004
DIN EN ISO 11126-10-2005 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第10部分:铁铝石榴石
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 10: Almandite garnet (ISO 11126-10:2000);
German version EN ISO 11126-10:2004
DIN EN ISO 8502-11-2006 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐的现场滴定测定方法(ISO
8502 Preparation of steel substrates before
application of paints and related products -
Tests for the assessment of surface cleanliness
- Part 11: Field method for the turbidimetric
determination of water-soluble sulfate (ISO
8502-11:2006); German version EN ISO 8502-11:2006
DIN 11862-1977 饮料及乳制品业用配件.不锈钢制直通旋塞 Drink- and
dairy fittings; straight-way cocks of stainless
steel
DIN 11863-1977 饮料及乳制品业用配件.不锈钢制三通旋塞 Drink- and
dairy fittings; three-way cocks of stainless
steel
DIN 28156-1981 填料箱用碳钢和不锈钢制搅拌器的轴头.尺寸 Shaft end
for agitators of carbon and stainless steel,
for stuffing boxes; dimensions
DIN 43614-2-1980 开关装置和控制装置.压缩空气管道用管.不锈钢管 Switchgear
and controlgear; conduits for pressure-gas pipelines,
stainless steel conduits
DIN 11483-1-1983 乳品设备.清洁和消毒.对不锈钢的影响的考虑事项 Dairy
installations; cleaning and disinfection; consideration
of the action on stainless steel
DIN 28154-1983 旋转机械密封的碳钢和不锈钢搅拌器的轴端.尺寸 Shaft
end for carbon and stainless steel agitators,
for rotating mechanical seals; dimensions
DIN 28160-1983 碳钢和不锈钢制搅拌器容器用支撑环.位置 Support rings
for carbon and stainless steel agitator vessels;
position
DIN 28163-1983 碳钢和不锈钢制搅拌器轴用填料箱 Stuffing box
for agitator shafts of carbon and stainless
steel
DIN EN 2064-1992 航空航天.带润滑衬套的不锈钢关节轴承.技术规范 Aerospace
series; bearings spherical plain in corrosion
resisting steel with self lubricating liner;
technical specification; german version EN 2064:1992
DIN 28130-1-1986 带搅拌装置的搅拌器.第1部分:非合金钢和不锈钢制容器.术语、部件组合、一览表
Agitator vessels with agitation unit; non-alloy
and stainless steel vessels; terms, component
combinations, summary
DIN 65306-1986 航空航天.复合材料用的不锈钢制带净孔的嵌件 Aerospace;
inserts for composite materials, with clearance
hole, corrosion resisting steel
DIN 65230-1988 航空航天.马氏体硬化不锈钢阳极抛光.代号2600 Aerospace;
anodic polishing of maraging stainless steels;
code number 2600
DIN EN 2354-1989 航空和航天系列.不锈钢制带螺纹眼索端的操纵钢索.尺寸和负荷
Aerospace series; eye-ends, threaded, control
cable in corrosion resisting steel; dimensions
and loads
DIN EN 2358-1989 航空和航天系列.操纵钢索的不锈钢制模锻带眼的索端 Aerospace
series; eye-ends in corrosion resisting steel
swaged on type, control cable; dimensions and
loads
DIN EN 2360-1989 航空航天系列.操纵钢索的不锈钢滚制滚动轴承的挤压连接型叉型端部.尺寸和载荷
Aerospace series; fork-ends for rolling bearings
in corrosion resisting steel swaged on type,
control cable; dimensions and loads
DIN EN 2362-1989 航空航天系列.操纵钢索的不锈钢挤压连接型球形端部.尺寸和载荷
Aerospace series; ball-ends in corrosion resisting
steel swaged on type, control cable; dimensions
and loads
DIN 11854-1991 食品工业用管配件.不锈钢制软管.带螺纹的软管接头和软管锥形接头
Food industry fittings; hose unions of stainless
steel; threaded hose couplings, conical hose
couplings
DIN 28155-1992 碳钢和不锈钢制搅动轴的法兰联结器.搅拌容器的联结器.尺寸
Flanged couplings for carbon and stainless steel
agitator shafts; coupling in the agitator vessel;
dimensions
DIN EN ISO 1127-1997 不锈钢管.尺寸、公差和单位长度的标准质量 Stainless
steel tubes - Dimensions, tolerances and conventional
masses per unit length (ISO 1127:1992); German
version EN ISO 1127:1996
DIN 28124-1-1992 非合金钢和不锈钢制非压力容器和工艺装置用人孔盖 Manhole
closures for unpressurized vessels and process
apparatus of nonalloy and stainless steel
DIN 28124-3-1992 不锈钢制压力容器用人孔盖 Manhole closures
for pressure vessels of stainless steel
DIN EN 3292-1994 航空航天系列.机体用轴承.不锈钢单列自定心滚柱轴承.直径系列
3 和 直径系列 4.尺寸和负载; 德文版本 EN 32 Aerospace series;
bearings, airframe rolling - Single row self-aligning
roller bearings in corrosion resisting steel
- Diameter series 3 and 4; dimensions and loads;
German version EN 3292:1994
DIN EN 3289-1994 航空航天系列.机体用轴承.不锈钢双列自定心滚珠轴承.直径系列
0.尺寸和负载; 德文版本 EN 3289:1994 Aerospace series;
bearings, airframe rolling - Double row self-aligning
ball bearings in corrosion resisting steel -
Diameter series 2; dimensions and loads; German
version EN 3289:1994
DIN EN 3286-1994 航空航天系列.机体用轴承.不锈钢刚性单列滚珠轴承.直径系列
0 和直径系列 2.公称公差范畴.尺寸和负载; 德文 Aerospace series;
bearings, airframe rolling - Rigid single row
ball bearings in corrosion resisting steel -
Diameter series 0 and 2; normal clearance category;
dimensions and loads; German version EN 3286:1994
DIN EN ISO 7046-2-1994 十字槽沉头螺钉(通用头).产品等级 A.第2部分:8.8
级特性钢,不锈钢和有色金属 (ISO 7046-2:1990); 德文版本 Cross
recessed countersunk flat head screws (common
head style) - Product grade A - Part 2: Steel
of property class 8.8; stainless steel and non-ferrous
metals (ISO 7046-2:1990); German version EN
ISO 7046-2:1994
DIN 2559-4-1994 焊缝预加工.第4部分:不锈钢无缝管圆焊缝内径配合 Preparation
of welds; part 4: matching of inside diameters
for circumferential welds on seamless pipes
of stainless steels
DIN EN 3283-1994 航空航天系列.飞机用滚动轴承.不锈钢单列滚珠轴承.直径系列
8 和 直径系列 9.尺寸和负载; 德文版本 EN 3283 Aerospace series;
bearings, airframe rolling - Rigid single row
ball bearings in corrosion resisting steel -
Diameter series 8 and 9; dimensions and loads;
German version EN 3283:1994
DIN 28084-3-1996 设备支承环和环支承件.第3部分:非合金钢和不锈钢搅拌器容器的尺寸和最大工作重量
Support rings and ring supports on apparatus
- Part 3: Dimensions, maximum service weight
for on non-alloy and stainless steel agitator
vessels
DIN EN ISO 8734-1998 淬硬钢和马氏体不锈钢制直销（定位销） Parallel
pins of hardened and martensitic stainless steel
(Dowel pins) (ISO 8734:1997); German version
EN ISO 8734:1997
DIN EN ISO 8735-1998 淬硬钢和马氏体不锈钢制带内螺纹的等直径销 Parallel
pins with internal thread, of hardened and martensitic
stainless steel (ISO 8735:1997); German version
EN ISO 8735:1997
DIN 6656-1997 风动管道系统.风动管道系统钢和不锈钢传送管、传送管弯头和套管
Pneumatic tube system - Conveyor tubes, conveyor
tube bends and sleeves for pneumatic tubes lines
in steel and stainless steel
DIN EN ISO 8442-2-1998 和食品接触的材料及器具.刀具和餐桌器具.第2部分:不锈钢和镀银餐具的要求
Materials and articles in contact with foodstuffs
- Cutlery and table holloware - Part 2: Requirements
for stainless steel and silver-plated cutlery
(ISO 8442-2:1997); German version EN ISO 8442-2:1997
DIN 30681-1998 煤气装置的补偿器.带风箱装置的不锈钢扩展连接件.安全技术要求、试验和标记
Compensators for gas-installations - Stainless
steel expansions joints with bellows units -
Safety requirements, testing, marking
DIN ISO 5832-9-2000 外科植入物.金属材料.第9部分:锻造高氮不锈钢
Implants for surgery - Metallic materials -
Part 9: Wrought high nitrogen stainless steel
(ISO 5832-9:1992)
DIN EN 1600-1997 焊料.不锈钢和耐热钢手工金属电弧焊药皮焊条.分类 Welding
consumables - Covered electrodes for manual
metal arc welding of stainless and heat resisting
steels - Classification; German version EN 1600:1997
DIN EN ISO 2338-1998 未淬火钢和奥氏体不锈钢制的等直径销 Parallel
pins of unhardened steel and austenitic stainless
steel (ISO 2338:1997); German version EN ISO
2338:1997
DIN EN ISO 8733-1998 未淬硬钢和奥氏体不锈钢制带内螺纹的等直径销 Parallel
pins with internal thread, of unhardened and
austenitic stainless steel (ISO 8733:1997);
German version EN ISO 8733:1997
DIN 3384-1998 煤气用不锈钢软管组件.安全性要求、试验和标记 Hose assemblies
of stainless steel for gas - Safety requirements,
testing, marking
DIN 86341-2000 船舶与海上技术.超轻型活动法兰和对焊发兰.DN32-DN50(最大到PN25)和DN65-DN125(最大到PN10)钢和不锈钢制对
Ships and marine technology - Loose flanges
and welding necks extra light duty - Welding
necks made from steel and stainless steel DN
32 to DN 50, up to PN 25, DN 65 to DN 125, up
to PN 10
DIN EN ISO 3651-1-1998 不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.用质量损失测量法在硝酸介质中的进
Determination of resistance to intergranular
corrosion of stainless steels - Part 1: Austenitic
and ferritic-austenitic (duplex) stainless steels
- Corrosion test in nitric acid medium by measurement
of loss in mass (Huey test) (ISO 3651-1:1998);
German version EN ISO 3651-1:1998
DIN EN ISO 3651-2-1998 不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.在含硫酸介质中进行腐蚀试验
Determination of resistance to intergranular
corrosion of stainless steels - Part 2: Ferritic,
austenitic and ferritic-austenitic (duplex)
stainless steels - Corrosion test in media containing
sulfuric acid (ISO 3651-2:1998); German version
EN ISO 3651-2:1998
DIN 11851-1998 食品,化学和医药工业用管接头.不锈钢制螺纹管连接件.滚压和焊接连接的设计
Fittings for food, chemical and pharmaceutical
industry - Stainless steel screwed pipe connections
- Design for rolling in and welding-on
DIN EN 1011-3-2001 焊接.焊接金属材料推荐标准.第3部分:不锈钢电弧焊
Welding - Recommendations for welding of metallic
materials - Part 3: Arc welding of stainless
steels; German version EN 1011-3:2000
DIN EN 1124-2-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第2部分:S系统.尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes, with spigot and socket
for waste water systems - Part 2: Systeme S;
dimensions; German version EN 1124-2:1999
DIN EN 1124-3-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第3部分:X系统.尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 3: System X;
dimensions; German version EN 1124-3:1999
DIN 6663-1999 气动管系统.塑料(PVC),钢铁,和不锈钢气动管系统部件的制造工艺
Pneumatic tube systems - Workmanship of components
for pneumatic tube systems in plastics (PVC-U),
ferrous steel and stainless steel
DIN 11850-1999 食品、化工和制药工业用管.不锈钢管.尺寸,材料 Tubes
for the food, chemical and pharmaceutical industry
- Stainless steel tubes - Dimensions, materials
DIN EN 10228-4-1999 钢锻件的无损检验.第4部分:奥氏体和奥氏铁素体不锈钢锻件的超声波检验
Non-destructive testing of steel forgings -
Part 4: Ultrasonic testing of austenitic and
austenitic-ferritic stainless steel forgings;
German version EN 10228-4:1999
DIN EN 502-2000 金属薄板屋顶制品.全支撑不锈钢薄板屋顶制品规范 Roofing
products from metal sheet - Specification for
fully supported roofing products from stainless
steel sheet; German version EN 502:1999
DIN EN 12072-2000 焊料.不锈钢和耐热钢电弧焊接用丝状电极、焊丝和焊条.分类:
德文版本 EN 12072:1999 Welding consumables - Wire
electrodes, wires and rods for arc welding of
stainless and heat-resisting steels - Classification;
German version EN 12072:1999
DIN EN 10222-5-2000 压力容器用钢锻件.第5部分:马氏体、奥氏体和奥氏体铁素体不锈钢
Steel forgings for pressure purposes - Part
5: Martensitic, austenitic and austenitic-ferritic
stainless steels; German version EN 10222-5:1999
DIN EN 10250-4-2000 通用工程用开式模锻钢件.第4部分:不锈钢 Open
die steel forgings for general engineering purposes
- Part 4: Stainless steels; German version EN
10250-4:1999
DIN EN 1964-3-2000 移动式气瓶.容量从0.5升到150升(含150升)可重复装填移动式无缝钢制气瓶的设计和结构规范.第3部分:最大R<上
Transportable gas cylinders - Specification
for the design and construction of refillable
transportable seamless steel gas cylinders of
capacity from 0,5 litre up to and including
150 litres - Part 3: Cylinders made of stainless
steel with a maximum R<(Index)m> value
of less than 1100 MPa; German version EN 1964-3:2000
DIN EN 10028-7-2000 承压钢板.第7部分:不锈钢 Flat products
made of steels for pressure purposes - Part
7: Stainless steels; German version EN 10028-7:2000
DIN ISO 5832-1-2000 外科植入物.金属材料.第1部分:锻造不锈钢 Implants
for surgery - Metallic materials - Part 1: Wrought
stainless steel (ISO 5832-1:1997)
DIN 11852-2000 食品和化学工业用阀门.不锈钢配件.焊合三通、弯头和异径接头
Valves for food and chemical industries - Stainless
steel fittings - Tees, bends, reducers for welding-on
DIN EN ISO 7153-1-2001 外科仪器.金属材料.第1部分:不锈钢 Surgical
instruments - Metallic materials - Part 1: Stainless
steel (ISO 7153-1:1991, including Amendment
1:1999); German version EN ISO 7153-1:2000
DIN EN ISO 8249-2000 焊接.奥氏体和双重铁素体-奥氏体铬镍(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals (ISO 8249:2000);
German version EN ISO 8249:2000
DIN EN 508-3-2000 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第3部分:不锈钢
Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 3: Stainless
steel; German version EN 508-3:2000
DIN EN 508-1-2000 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第1部分:钢
Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 1: Steel; German
version EN 508-1:2000
DIN EN 508-2-2000 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第2部分:铝
Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 2: Aluminium;
German version EN 508-2:2000
DIN EN 14222-2003 不锈钢外壳的锅炉 Stainless steel shell
boilers; German version EN 14222:2003
DIN EN 10272-2001 承压设备用不锈钢棒材 Stainless steel
bars for pressure purposes; German version EN
10272:2000
DIN 32676-2001 饮食业、化工业和医药业用管件.不锈钢管卡箍连接.焊接式 Fittings
for the food, chemical and pharmaceutical industries
- Clamp connections for stainless steel tubes
- Weld-on type
DIN 4935-1-2002 井用不锈钢绕丝滤管.第1部分:带连续槽隙和螺纹连接的DN
40至 DN 100 Wire wrapped screens of stainless
steel for wells - Part 1: DN 40 to DN 100 with
continuous slots and threaded connection
DIN EN 10151-2003 不锈钢弹簧带材.交货技术条件 Stainless steel
strip for springs - Technical delivery conditions;
German version EN 10151:2002
DIN EN 10270-3-2001 机械弹簧钢丝.第3部分:不锈钢弹簧钢丝 Steel
wire for mechanical springs - Part 3: Stainless
spring steel wire; German version EN 10270-3:2001
DIN EN 10263-5-2002 冷镦和冷挤压钢杆材、棒材和线材.第5部分:不锈钢交货技术条件
Steel rod, bars and wire for cold heading and
cold extrusion - Part 5: Technical delivery
conditions for stainless steels; German version
EN 10263-5:2001
DIN EN 10307-2002 无损检验.厚度等于或大于6mm的奥氏体和奥氏体铁素不锈钢板制品的超声波检验(反射法);
德文版本 EN 10307:20 Non-destructive testing - Ultrasonic
testing of austenitic and austenitic-ferritic
stainless steels flat products of thickness
equal to or greater than 6 mm (reflection method);
German version EN 10307:2001
DIN EN ISO 9626-2002 医疗器械用不锈钢针状管材 Stainless
steel needle tubing for manufacture of medical
devices (ISO 9626:1991 + AMD 1:2001) (including
amendment A1:2001); German version EN ISO 9626:1995
+ A1:2001
DIN 28025-2003 不锈钢喷嘴.PN 10 至 PN 40 Nozzles of
stainless steel - PN 10 to PN 40
DIN 28038-2003 不锈钢制压力容器和加工装置用带圆柱形毂焊接法兰 Weld
flanges with cylindrical hub for pressure vessels
and process apparatus of stainless steel
DIN EN ISO 16048-2003 耐腐蚀不锈钢紧固件的钝化处理 Passivation
of corrosion-resistant stainless-steel fasteners
(ISO 16048:2003); German version EN ISO 16048:2003
DIN V ENV 1993-1-4-2002 欧洲法规3:钢结构设计.第1-4部分:一般规则.不锈钢的补充规则;
德文版本 ENV 1993-1-6:1999 Eurocode 3: Design of
steel structures - Part 1-4: General rules;
Supplementary rules for stainless steels; German
version ENV 1993-1-4:1996
DIN 4935-3-2002 井用不锈钢绕丝滤管.第3部分:带连续槽隙和螺纹连接的 DN
500至 DN 1000 Wire wrapped screens of stainless
steel for wells - Part 3: DN 500 to DN 1000
with continuous slots and flanged connection
DIN 4935-2-2002 井用不锈钢绕丝滤管.第2部分:带连续槽隙和螺纹连接的DN
100 至 DN 500 Wire wrapped screens of stainless
steel for wells - Part 2: DN 100 to DN 500 with
continuous slots and threaded connection
DIN EN 10264-4-2002 钢丝和钢丝产品.绳索用钢丝.第4部分:不锈钢钢丝
Steel wire and wire products - Steel wire for
ropes - Part 4: Stainless steel wire; German
version EN 10264-4:2002
DIN 11866-2003 无菌、化学工业和药业用不锈钢管.尺寸和材料 Stainless
steel tubes for aseptic, chemical and pharmaceutical
industries - Dimensions, materials
DIN 11865-2003 无菌、化学工业和药业用不锈钢配件.焊接用三通管、弯头和异径接头
Stainless steels fittings for aseptic, chemical
and pharmaceutical industries - Tees, bends,
reducers for welding on
DIN V ENV 1090-6-2003 钢支承结构施工.第6部分:不锈钢补充规则 Execution
of steel structures - Part 6: Supplementary
rules for stainless steel; German version ENV
1090-6:2000
DIN 28031-2003 非合金钢和不锈钢制非加压容器和加工装置用焊接法兰 Weld
flanges for unpressurized vessels and process
apparatus of non-alloy and stainless steel
DIN EN ISO 3506-4-2003 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉
Mechanical properties of corrosion-resistant
stainless steel fasteners - Part 4: Tapping
screws (ISO 3506-4:2003); German version EN
ISO 3506-4:2003
DIN 28141-2003 非合金钢和不锈钢制容器和加工器具用连接法兰 Connecting
flanges for vessels and process apparatus of
non-alloy and stainless steel
DIN EN 13828-2003 建筑物用阀.建筑物内饮用水供应用手动铜合金和不锈钢球阀.试验和要求
Building valves - Manually operated copper alloy
and stainless steel ball valves for potable
water supply in buildings - Tests and requirements;
German version EN 13828:2003
DIN EN 1124-1-2004 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、检验和质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 1: Requirements,
testing, quality control; German version EN
1124-1:1999 + A1:2004
DIN 28137-1-2005 搅拌器用安装凸缘.第1部分:非合金和不锈钢容器用 Mounting
flanges for agitation units - Part 1: For vessels
of non-alloyed and stainless steel
DIN 28140-1-2005 排泄阀用连接件.第1部分:非合金钢、不锈钢或有衬钢.尺寸配合PN10
Connections for bottom discharge valves - Part
1: Non alloyed, stainless or lined steel; dimensions
mating PN 10
DIN 82103-2005 提升、拖引、捆索用元件.弓形钩环.不锈钢 Components
for liftig, towing, lashing - Shackle, bow -
Stainless steels
DIN EN 10088-1-2005 不锈钢.第1部分:不锈钢目录 Stainless
steels - Part 1: List of stainless steels; German
version EN 10088-1:2005
DIN EN 10088-3-2005 不锈钢.第3部分:一般用途耐腐蚀钢半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件
Stainless steels - Part 3: Technical delivery
conditions for semi-finished products, bars,
rods, wire, sections and bright products of
corrosion resisting steels for general purposes;
German version EN 10088-3:2005
DIN EN 10088-2-2005 不锈钢.第2部分:一般用途耐腐蚀钢薄板/板材和带材的交货技术条件
Stainless steels - Part 2: Technical delivery
conditions for sheet/plate and strip of corrosion
resisting steels for general purposes; German
version EN 10088-2:2005
DIN 5512-3-2004 有轨车辆用建造用不锈钢扁平制品 Materials for
rail vehicles - Steels - Part 3: Stainless steel
flat products; Selected standard
DIN 28122-2004 公称尺寸DN125 至DN500、PN标示PN10至40的带不锈钢面的盲法兰
Blank flanges with stainless steel facing, of
nominal sizes DN 125 to DN 500 and PN designations
PN 10 to PN 40
DIN EN 10216-5-2004 压力用途无缝钢管.交货技术条件.第5部分:不锈钢管
Seamless steel tubes for pressure purposes -
Technical delivery conditions - Part 5: Stainless
steel tubes; German version EN 10216-5:2004
DIN EN 12502-4-2005 金属材料防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第4部分:不锈钢的影响因素
Protection of metallic materials against corrosion
- Guidance on the assessment of corrosion likelihood
in water distribution and storage systems -
Part 4: Influencing factors for stainless steels;
German version EN 12502-4:2004
DIN 82102-2005 提升、拖引、捆索用元件.D形钩环.不锈钢 Components
for lifting, towing, lashing - Shackle, dee
- Stainless steels
DIN EN 10217-7-2005 压力用途焊接钢管.交货技术条件.第7部分:不锈钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 7: Stainless steel
tubes; German version EN 10217-7:2005
DIN EN 1124-4-2005 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统用元件
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 4: Components
for vacuum drainage systems and for drainage
systems on ships; German version EN 1124-4:2005
DIN 28036-2005 不锈钢制压力容器和加工装置用焊接法兰 Weld flanges
for pressure vessels and process apparatus of
stainless steel
DIN VDE 0250-605-2006 焊接用品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Cables, wires and flexible cords for power install
- Part 605: Screened flexible cable with rubber
insulation and PVC sheath nominal voltage U<(Index)0>/U
3,6/6 kV and 6/10 kV
DIN EN 10312-2005 水和其他水成液输送用焊接不锈钢管.交货技术条件 Welded
stainless steel tubes for the conveyance of
water and other aqueous liquids - Technical
delivery conditions; German version EN 10312:2002
+ A1:2005
DIN 28136-2-2005 搅拌容器.第2部分:非合金和不锈钢容器顶盖喷嘴的位置和尺寸
Agitator vessels - Part 2: Positions and sizes
of cover nozzles in non-alloy and stainless
steel vessels
DIN 11867-2005 无菌、化学和制药工业的生铁系统用弯头、不锈钢焊接管件 Elbows
for pigging systems, welding fittings in stainless
steel, for aseptic, chemical and pharmaceutical
industries
DIN EN 1124-1 Berichtigung 1-2006 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、试验和质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 1: Requirements,
testing, quality control; German version EN
1124-1:1999 + A1:2004, Corrigenda to DIN EN
1124-1:2004-12
DIN EN 10296-2-2006 机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢.德文版本
EN 10296-2-2005 Welded circular steel tubes
for mechanical and general engineering purposes
- Technical delivery conditions - Part 2: Stainless
steel; German version EN 10296-2:2005
DIN EN 10297-2-2006 机械和一般工程用无缝钢管.交货技术条件.第2部分:不锈钢.德文版本EN
10297-2-2005 Seamless steel tubes for mechanical
and general engineering purposes - Technical
delivery conditions - Part 2: Stainless steel;
German version EN 10297-2:2005
DIN EN 10028-7 Berichtigung 1-2006 压力容器用扁平钢轧材.第7部分:不锈钢.DIN
EN 10028-7-2000勘误 Flat products made of steels
for pressure purposes - Part 7: Stainless steels;
German version EN 10028-7:2000, Corrigenda to
DIN EN 10028-7:2000-06; German version EN 10028-7:2000/AC:2004
DIN EN ISO 9445-2006 连续冷轧不锈钢窄带材、宽带材、板材和切割长度.尺寸和形状公差(ISO
9445:2002) Continuously cold-rolled stainless
steel narrow strip, wide strip, plate/sheet
and cut lengths - Tolerances on dimensions and
form (ISO 9445:2002); German version EN ISO
9445:2006
DIN 28138-1-2006 搅拌器轴的滚动机构密封.第1部分:碳钢或不锈钢.使用数据、组装尺寸
Rotating mechanical seals for agitator shafts
- Part 1: Carbon or stainless steel - Operating
data, assembly dimensions
DIN EN ISO 17633-2006 焊接用品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Welding consumables - Tubular cored electrodes
and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting
steels - Classification (ISO 17633:2004); German
version EN ISO 17633:2006
DIN EN 14638-1-2006 可运输的气瓶.容量不超过150升的可再充气焊接容器.第1部分:焊接奥氏体的试验方法证明设计的不锈钢气瓶
Transportable gas cylinders - Refillable welded
receptacles of a capacity not exceeding 150
litres - Part 1: Welded austenitic stainless
steel cylinders made to a design justified by
experimental methods; German version EN 14638-1:2006
DIN 43661-1972 户内开关设备用槽钢；设计与安装详细说明 Foundation
bars for indoor switchgear; design and mounting
particulars
DIN 1026-1-2000 热轧槽钢.第1部分：带斜度凸缘的槽钢.尺寸、质量和截面特性
Hot rolled steel channels - Part 1: Taper flange
steel channels; dimensions, masses and sectional
properties
DIN EN 10279-2000 热轧槽钢.形状,尺寸,质量公差.德文版本EN 10279:2000
Hot rolled steel channels - Tolerances on shape,
dimensions and mass; German version EN 10279:2000
DIN 28180-1985 管式热交换器用无缝钢管.尺寸、尺寸偏差和材料 Seamless
steel tubes for tubular heat exchangers; dimensions,
dimensional deviations and materials
DIN EN 10246-6-2000 钢管的无损检验.第6部分:无缝钢管横向缺陷探测的自动全周长超声波试验
Non-destructive testing of steel tubes - Part
6: Automatic full peripheral ultrasonic testing
of seamless steel tubes for the detection of
transverse imperfections; German version EN
10246-6:1999
DIN EN 10246-4-2000 钢管的无损检验.第4部分:铁磁无缝钢管横向缺陷检测用自动全外周磁换能器检验/磁漏检验
Non-destructive testing of steel tubes - Part
4: Automatic full peripheral magnetic transducer/flux
leakage testing of seamless ferromagnetic steel
tubes for the detection of transverse imperfections;
German version EN 10246-4:1999
DIN 2445 Bb.1-2000 承受动态载荷的无缝钢管.设计规则 Seamless
steel tubes for dynamic loads - Design rules
DIN 2445-1-2000 承受动态载荷的无缝钢管.第1部分:流体系统用压力为100至500巴的热轧管
Seamless steel tubes for dynamic loads - Part
1: Hot finished tubes in fluid systems, 100
to 500 bar
DIN 2445-2-2000 承受动态载荷的无缝钢管.第2部分:流体系统用压力为100至500巴的精密钢管
Seamless steel tubes for dynamic loads - Part
2: Steel tubes for precision application in
fluid systems, 100 bar to 500 bar
DIN EN 10216-1-2004 压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管
Seamless steel tubes for pressure purposes -
Technical delivery conditions - Part 1: Non-alloy
steel tubes with specified room temperature
properties; German version EN 10216-1:2002 +
A1:2004
DIN EN 10216-4-2004 压力载荷用无缝钢管.交货技术条件.第4部分:带特定低温性能的非合金和合金钢管
Seamless steel tubes for pressure purposes -
Technical delivery conditions - Part 4: Non-alloy
and alloy steel tubes with specified low temperature
properties; German version EN 10216-4:2002 +
A1:2004
DIN EN 10216-3-2004 压力载荷用无缝钢管.交货技术条件.第3部分:合金细粒钢管
Seamless steel tubes for pressure purposes -
Technical delivery conditions - Part 3: Alloy
fine grain steel tubes; German version EN 10216-3:2002
+ A1:2004
DIN EN 10216-2-2004 压力载荷用无缝钢管.交货技术条件.第2部分:带特定高温性能的非合金和合金钢管
Seamless steel tubes for pressure purposes -
Technical delivery conditions - Part 2: Non-alloy
and alloy steel tubes with specified elevated
temperature properties; German version EN 10216-2:2002
+ A1:2004
DIN EN 10209-1996 涂釉低碳钢冷轧板材.交货技术条件 Cold rolled
low carbon steel flat products for vitrious
enamelling - Technical delivery conditions;
German version EN 10209:1996
DIN EN 10016-3-1995 拉拔和/或冷轧用非合金钢棒.第3部分:沸腾和沸腾置换低碳钢棒材的特殊要求
Non-alloy steel rod for drawing and/or cold
rolling - Part 3: Specific requirements for
rimmed and rimmed substitute low carbon steel
rod; German version EN 10016-3:1994
DIN EN 10084-1998 渗碳钢.技术交货条件 Case hardening
steels - Technical delivery conditions; German
version EN 10084:1998
DIN EN 10139-1997 冷成形加工用无涂层低碳钢冷轧窄带材.技术交货条件 Cold
rolled uncoated mild steel narrow steel strip
for cold forming - Technical delivery conditions;
German version EN 10139:1997
DIN EN 10111-1998 冷弯曲成型的连续热轧低碳钢带和薄钢板.交货技术条件
Continuously hot-rolled low carbon steel sheet
and strip for cold bending - Technical delivery
conditions; German version EN 10111:1998
DIN EN 10257-1-1998 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第1部分:陆地铺设的电缆
Zinc or zinc alloy coated low carbon steel wire
for armouring power and telecommunication cables
- Part 1: Land cables; German version EN 10257-1:1998
DIN EN 10257-2-1998 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第2部分:海底铺设电缆
Zinc or zinc alloy coated low carbon steel wire
for armouring power and telecommunication cables
- Part 2: Submarine cables; German version EN
10257-2:1998
DIN EN ISO 898-5-1998 碳钢和合金钢制紧固件的机械性能.第5部分:非拉伸应力条件下止动螺钉和类似的紧固件
Mechanical properties of fasteners made of carbon
steel and alloy steel - Part 5: Set screws and
similar fasteners not under tensile stress (ISO
898-5:1998); German version EN ISO 898-5:1998
DIN EN 10130-1999 冷成形用的冷轧低碳钢平板.交货技术条件(包括修正件A1:1998)
Cold rolled low carbon steel flat products for
cold forming - Technical delivery conditions
(includes amendment A1:1998); German version
EN 10130:1991 + A1:1998
DIN EN 10253-1-1999 对焊管管件.第1部分:一般用途和无特殊检验要求的锻造碳钢
Butt-welding pipe fittings - Part 1: Wrought
carbon steel for general use and without specific
inspection requirements; German version EN 10253-1:1999
DIN EN ISO 898-1-1999 碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺钉和螺柱
Mechanical properties of fasteners made of carbon
steel and alloy steel - Part 1: Bolts, screws
and studs (ISO 898-1:1999); German version EN
ISO 898-1:1999
DIN 28115-2003 碳钢喷嘴.PN 10 至 PN 40 Carbon steel
nozzles - PN 10 to PN 40
DIN EN 10327-2004 连续热浸涂覆冷成形低碳钢带材和板材.交货技术条件 Continuously
hot-dip coated strip and sheet of low carbon
steels for cold forming - Technical delivery
conditions; German version EN 10327:2004
DIN EN 13322-1-2006 可运输的气瓶.可再填充的焊接钢气瓶.设计和制造.第1部分:碳钢
Transportable gas cylinders - Refillable welded
steel gas cylinders - Design and construction
- Part 1: Carbon steel; German version EN 13322-1:2003
+ A1:2006
DIN 51214-1977 钢的试验.圆钢丝打节试样的拉力试验 Testing of
Steel; Tensile Test for Round Wires Using Knotted
Specimens
DIN 7993-1970 轴和孔用圆钢丝挡圈及挡圈槽 Round Wire Snap
Rings and Snap Ring Grooves for Shafts and Bores
DIN 3570-1968 20至500NW管用圆钢带箍 Steel Strap for
Tubes of NW 20 to 500
DIN 5299-1980 半圆钢丝、圆钢丝及锻造的弹簧保险钩 Snap hook half-round
wire, round wire and forged
DIN 15236-4-1980 机械式连续运输机.第4部分:链斗升降机、附属于圆钢环节链的铲斗
Continuous mechanical handling equipment; bucket
elevators, bucket attachment to round steel
link chains
DIN 73130-1989 活塞销用圆钢丝锁环 Round wire snap rings
for piston pins
DIN 685-1-1981 经过检验的圆钢链.术语 Round steel link
chains; tested terms
DIN 5684-1-1984 提升用经校准和检验的圆钢链索.5级 Calibrated
and tested round steel link chains for lifting
purposes; grade 5
DIN 5684-2-1984 提升用经校准和检验的圆钢链索.6级 Calibrated
and tested round steel link chains for lifting
purposes; grade 6
DIN 20142-1992 带圆钢弓和双把手的弓锯 Hacksaws with steel
frames and two handles
DIN 762-1-1992 连续输送机用经过校正和检验的链环节距为5d的2级圆钢链索
Calibrated and tested round steel link chains
for continuous conveyors; grade 2, pitch 5d
DIN 21381-1988 绳索装置.圆钢丝索的套环连接板 Rope attachments;
thimble connection plates for round ropes
DIN 21386-1988 绳索装置.圆钢丝索的套环 Rope attachments;
thimbles for round ropes
DIN 763-1990 不按量规检验的长环节圆钢链 Tested, non-calibrated,
long-link round steel chains
DIN 762-2-1992 连续输送机用经过校正和检验的链环节距为5d的3级圆钢链索
Calibrated and tested round steel link chains
for continuous conveyors; grade 3, pitch 5d
DIN 764-1-1992 连续输送机用经过校正和检验的链环节距为3.5d的2级圆钢链索
Calibrated and tested round steel link chains
for continuous conveyors; grade 2, pitch 3,5d
DIN 764-2-1992 连续输送机用经过校正和检验的链环节距为3.5d的3级圆钢链索
Calibrated and tested round steel link chains
for continuous conveyors; grade 3, pitch 3,5d
DIN 32891-1996 圆钢链.质量等级2,不按量规检验 Round steel
link chains - Grade 2, non-calibrated, tested
DIN 5687-1-1996 圆钢链.第1部分:质量等级5,平均公差,经试验 Round
steel link chains - Part 1: Grade 5, medium
tolerance, tested
DIN EN 818-2-1996 起重用短环圆钢链条.安全性.第2部分:8级止档链中级公差圆钢链条
Short link chain for lifting purposes - Safety
- Part 2: Medium tolerance chain for chain slings,
grade 8; German version EN 818-2:1996
DIN EN 818-4-1996 起重用短环圆钢链条.安全性.第4部分:8级止档链 Short
link chain for lifting purposes - Safety - Part
4: Chain slings, grade 8; German version EN
818-4:1996
DIN 20637-1997 矿山用单轨架空道.经检验长链节架空圆钢链 Monorails
for mining - Tested round steel chains for suspensions
- Tested, long link
DIN 685-3-2001 经过检验的圆钢链.第3部分:试验 Round steel
link chains, tested - Part 3: Test
DIN EN 818-3-1999 起重用短环节链.安全性.第3部分:链式吊索用的中级公差的圆钢链.质量等级4
Short link chain for lifting purposes - Safety
- Part 3: Medium tolerance chain for chain slings;
grade 4; German version EN 818-3:1999
DIN EN 3145-2003 航空航天系列.热轧圆钢棒.标称公差.直径6mm ≤ D
≤ 250mm.尺寸 Aerospace series - Round bars, hot
rolled in steel - Normal tolerances; Diameter
6 mm D 250 mm; Dimensions; German and English
version EN 3145:2001
DIN 685-4-2001 经过检验的圆钢链.第4部分:标记,试验合格证书 Round
steel link chains, tested - Part 4: Marking,
test certificate
DIN 685-2-2001 经过检验的圆钢链.第2部分:安全要求 Round steel
link chains, tested - Part 2: Safety requirements
DIN 22252-2001 采矿输送机和回采设备圆钢链 Round steel link
chains for conveyors and winning equipment in
mining
DIN 5685-3-2003 未经载荷验证的圆钢扁节链.第3部分:短链 Round steel
link chains non proof loaded - Part 3: Short
link
DIN 5685-2-2003 未经载荷验证的圆钢扁节链.第2部分:半长链 Round
steel link chains non proof loaded - Part 2:
Semi long link
DIN 5685-1-2003 未经载荷验证的圆钢扁节链.第1部分:长链 Round steel
link chains non proof loaded - Part 1: Long
link
DIN EN 10060-2004 一般用途热轧圆钢棒.尺寸及形状和尺寸公差 Hot rolled
round steel bars - Dimensions and tolerances
on shape and dimensions; German version EN 10060:2003
DIN EN 14330-2004 内河航行船舶.无嵌钉的锚链.圆钢环节链 Inland
navigation vessels - Studless anchor chain -
Round steel link chain; German version EN 14330:2003
DIN EN 10296-1-2004 机械工程和一般工程用焊接圆钢管.交货技术条件.第1部分:非合金及合金钢管
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Part 1: Non-alloy and alloy steel
tubes; German version EN 10296-1:2002
DIN EN 10108-2005 冷镦和冷挤压圆钢棒.尺寸和公差 Round steel
rod for cold heading and cold extrusion - Dimensions
and tolerances; German version EN 10108:2004
DIN EN 13025-2-2006 包装.轻型金属容器.第2部分:20000ml、25000ml和30000ml标称容量的固定盖(紧盖)圆钢和马口铁容器
Packaging - Light gauge metal containers - Part
2: Non-removable head (tight head) round steel
and tinplate containers with a nominal capacity
of 20000 ml, 25000 ml and 30000 ml; German version
EN 13025-2:2005
DIN EN 13025-3-2006 包装.轻型金属容器.第3部分:20000ml、25000ml和30000ml标称容量可移动盖(活盖)圆钢和马口铁容器
Packaging - Light gauge metal containers - Part
3: Removable head (open head) round steel and
tinplate containers with a nominal capacity
of 20000 ml, 25000 ml and 30000 ml; German version
EN 13025-3:2005
DIN 82056-2006 圆钢环节链.张索链 Round steel link chains
- Span chains
DIN EN 10296-2-2006 机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢.德文版本
EN 10296-2-2005 Welded circular steel tubes
for mechanical and general engineering purposes
- Technical delivery conditions - Part 2: Stainless
steel; German version EN 10296-2:2005
DIN 1581-1977 棒钢材.链节带用型钢.尺寸.重量 Steel Bars; Hinge
Strip Profiles; Dimensions, Weights
DIN 2090-1971 扁钢制螺旋压缩弹簧.计算 Helical Compression
Springs made of Flat Bar Steel; Calculation
DIN 1547-8-1969 方钢及扁钢型材的成形拉模 Shaped drawing
dies for steel of square and flat section
DIN 50142-1982 金属材料的检验.扁钢弯曲疲劳试验 Testing of metallic
materials; Flat bending fatigue test
DIN 59350-1982 精制扁钢和方钢棒材.尺寸、重量、允许偏差 Precision
flat and square steel bars; Dimensions, weights,
permissible deviations
DIN 21151-1990 凿井.扁钢丝索的滑轮.安全性要求和试验 Shaft sinking;
pulleys for flat winding ropes; safety requirements
and testing
DIN EN 10067-1996 热轧球头扁钢.尺寸和形状、尺寸、质量公差 Hot rolled
bulb flats - Dimensions and tolerances on shape,
dimensions and mass; German version EN 10067:1996
DIN ISO 11677-3-1998 纺织机械和附件.敞口综耳扁钢综片及其相应的综丝合股支撑杆的的主要尺寸.第3部分:带C型和J型综耳的综丝合股
Textile machinery and accessories - Main dimensions
of open end loop flat steel healds and their
corresponding heald-carrying rods - Part 3:
Carrying rods for healds with C- and J-shaped
end loops (ISO 11677-3:1995)
DIN 59200-2001 扁钢产品.热轧宽扁材.尺寸、质量和尺寸、形状和质量公差 Flat
produts of steel - Hot rolled wide flats - Dimensions,
mass, tolerances on dimensions, shape and mass
DIN EN 10152-2003 电解镀锌冷轧扁钢制品.交货技术条件 Electrolytically
zinc coated cold rolled steel flat products
- Technical delivery conditions; German version
EN 10152:2003
DIN EN 10058-2004 一般用途热轧扁钢棒.尺寸及形状和尺寸公差 Hot rolled
flat steel bars for general purposes - Dimensions
and tolerances on shape and dimensions; German
version EN 10058:2003
DIN EN 10163-1-2005 热轧钢板、宽扁钢和型钢表面状态的交货要求.第1部分:一般要求
Delivery requirements for surface condition
of hot-rolled steel plates, wide flats and sections
- Part 1: General requirements; German version
EN 10163-1:2004
DIN EN 10092-1-2004 热轧弹簧扁钢棒材.第1部分:扁平棒材.尺寸及形状和尺寸公差
Hot rolled spring steel flat bars - Part 1:
Flat bars - Dimensions and tolerances on shape
and dimensions; German version EN 10092-1:2003
DIN EN 10169-1-2004 连续有机涂覆(盘绕涂覆)的扁钢制品.第1部分:一般信息(定义、材料、公差和试验方法)
Continuously organic coated (coil coated) steel
flat products - Part 1: General information
(definitions, materials, tolerances, test methods);
German version EN 10169-1:2003
DIN EN 10163-3-2005 热轧钢板、宽扁钢和型钢表面状态的交货要求.第3部分:型钢
Delivery requirements for surface condition
of hot-rolled steel plates, wide flats and sections
- Part 3: Sections; German version EN 10163-3:2004
DIN EN 10163-2-2005 热轧钢板、宽扁钢和型钢表面状态的交货要求.第2部分:钢板和宽扁钢
Delivery requirements for surface conditions
of hot-rolled steel plates, wide flats and sections
- Part 2: Plate and wide flats; German version
EN 10163-2:2004
DIN 79-2004 操作轴和部件用方钢 Squares for operating
spindles and operating elements
DIN 59370-1978 型钢.光亮直角等边角钢.尺寸.允许偏差.重量 Steel
Sections; Bright Square Edge Equal Angles; Dimensions,
Permissible Deviations, Weights
DIN 28081-2-1988 容器的型钢支座.尺寸、材料和结构 Vessel supports
made of steel sections; dimensions, material
and design
DIN 28081-4-1988 容器的型钢支座.第4部分:支承负荷通过支架作用于容器壁的最大弯曲力矩
Steel profile supports for vessels; maximum
permissible moments on the vessel wall due to
profile support loads
DIN 28179-1989 圆管式热交换器用U型钢管.技术规范 Steel U-tubes
for tubular heat exchangers; technical delivery
conditions
DIN ISO 96-1-1993 纺织机械和附件.环绽纺纱机和环绽捻线机的钢领和钢丝圈.T型钢领及其配用钢丝圈
Textile machinery and accessories; rings and
travellers for ring spinning and ring doubling
frames; T-rings and their appropriate travellers;
identical with ISO 96-1:1992
DIN ISO 96-2-1995 纺织机械和附件.环绽纺纱和环绽捻线的钢领圈和钢丝圈.第2部分:HzcH
型、HZ 型和 J 型钢领圈及其相应的钢丝 Textile machinery and
accessories - Rings and travellers for ring
spinning and ring doubling frames - Part 2:
HZCH-, HZ- and J-rings and their appropriate
travellers; identical with ISO 96-2:1992
DIN EN 10055-1995 带圆角的热轧等腰T型钢和过渡连接件.尺寸和形状公差
Hot rolled steel equal flange tees with radiused
root and toes - Dimensions and tolerances on
shape and dimensions; German version EN 10055:1995
DIN EN ISO 5778-2000 造船技术.防风雨的小型钢舱盖 Ships and
marine technology - Small weathertight steel
hatches (ISO 5778:1998); German version EN ISO
5778:2000
DIN 1026-2-2002 热轧U型钢.第2部分:平行凸缘U型钢;尺寸、质量和剖面性能
Hot rolled steel channels - Part 2: Parallel
flange steel channels; Dimensions, masses and
sectional properties
DIN ISO 9903-1-2003 纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第1部分:无互联锁或链接的底边
Textile machinery and accessories - Main dimensions
for section wires for metallic card clothing
- Part 1: Foot without interlocking or interchaining
(ISO 9903-1:2003)
DIN ISO 9903-2-2003 纺织机械和附件.梳理金属针布用异型钢丝主要尺寸.第2部分:有互链接的底边
Textile machinery and accessories - Main dimensions
for section wires for metallic card clothing
- Part 2: Foot with interchaining (ISO 9903-2:2003)
DIN V ENV 13381-5-2003 测定结构构件耐火作用的试验方法.第5部分:混凝土/压型钢板组合构件应用的保护方法
Test methods for determining the contribution
to the fire resistance of structural members
- Part 5: Applied protection to concrete/profiled
sheet steel composite members; German version
ENV 13381-5:2002
DIN 1027-2004 钢棒.热轧圆边Z型钢.尺寸、重量、公差和静态值 Steel
bars - Hot-rolled zees with round edges - Dimensions,
masses, tolerances, static values
DIN ISO 9903-1-2003 纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第1部分:无互联锁或链接的底边
Textile machinery and accessories - Main dimensions
for section wires for metallic card clothing
- Part 1: Foot without interlocking or interchaining
(ISO 9903-1:2003)
DIN ISO 9903-2-2003 纺织机械和附件.梳理金属针布用异型钢丝主要尺寸.第2部分:有互链接的底边
Textile machinery and accessories - Main dimensions
for section wires for metallic card clothing
- Part 2: Foot with interchaining (ISO 9903-2:2003)
日本钢铁标准(JIS steel standards)
--------------------------------------------------------------------------------
编号 中文名称
日本語標題 英文名称
JIS A5015-1992 筑路用钢铁炉渣
道路用鉄鋼スラグ Iron and steel slag for road construction
JIS B1047-2006 耐腐蚀不锈钢紧固件的钝化处理
耐食ステンレス鋼製締結用部品の不動態化 Passivation of corrosion-resistant
stainless-steel fasteners
JIS B1053-1999 用碳钢和合金钢制成的紧固件的机械特性.第5部分：不低于拉伸强度的紧固螺钉和类似螺纹紧固件
炭素鋼及び合金鋼製締結用部品の機械的性質 ― 第５部：引張力を受けない止めねじ及び類似のねじ部品
Mechanical properties of fasteners made of carbon
steel and alloy steel -- Part 5: Set screws
and similar threaded fasteners not under tensile
stresses
JIS B1054-1-2001 耐腐蚀不锈钢紧固件的机械性能.第1部分:螺栓、螺钉和螺柱
Mechanical properties of corrosion-resistant
stainless-steel fasteners -- Part 1: Bolts,
screws and studs
JIS B1054-2-2001 耐腐蚀不锈钢紧固件的机械特性.第2部分:螺母 Mechanical
properties of corrosion-resistant stainless-steel
fasteners -- Part 2: Nuts
JIS B1054-3-2001 耐腐蚀不锈钢紧固件的机械特性.第3部分:无拉伸应力的定位螺钉和类似紧固件
Mechanical properties of corrosion-resistant
stainless-steel fasteners -- Part 3: Set screws
and similar fasteners not under tensile stress
JIS B1054-4-2006 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 Mechanical
properties of corrosion-resistant stainless-steel
fasteners -- Part 4: Tapping screws
JIS B1056-2000 普通扭矩型钢六角头螺母.机械和使用性能 Prevailing
torque type steel hexagon nuts -- Mechanical
and performance properties
JIS B2308-2002 不锈钢制带螺纹的管接头 Stainless steel threaded
fittings
JIS B6911-1999 钢铁的正火与退火工艺
鉄鋼の焼ならし及び焼なまし加工 Process of normalizing and annealing
of iron and steel
JIS B6912-2002 钢铁的感应淬火和回火处理
鉄鋼の高周波焼入焼戻し加工 Process of induction hardening
and tempering of iron and steel
JIS B6913-1999 钢铁的淬火和回火工艺
鉄鋼の焼入焼戻し加工 Process of quenching and tempering
of iron and steel
JIS B6914-2002 钢铁的碳化、氰化、淬火和回火处理
鉄鋼の浸炭及び浸炭窒化焼入焼戻し加工 Process of carburizing and
carbonitriding, quenching and tempering of iron
and steel
JIS B6915-1999 钢铁的渗氮和碳氮共渗工艺
鉄鋼の窒化及び軟窒化加工 Process of nitriding and nitrocarburizing
of iron and steel
JIS E1110-1998 碳钢垫板
炭素鋼製タイプレート Carbon steel tie-plates
JIS E4047-2008 铁路车辆用钢材的电弧焊接头设计方法
鉄道車両―旅客車用構体―溶接継手設計方法 Rolling stock -- Body frame
-- Design methods for welded joints
JIS E4048-2008 铁路车辆.低碳钢点焊焊接接头.设计方法
鉄道車両―旅客車用構体―スポット溶接継手の設計方法 Rolling stock -- Body
structure for passenger cars -- Design method
for spot-welded joints
JIS E4049-1990 铁路车辆用不锈钢材焊接接头.设计方法
Welded joints of stainless steel for railway
rolling stock -- Design methods
JIS E5401-1-1998 铁路车辆用碳钢轮箍.质量要求
鉄道車両用炭素鋼タイヤ ― 品質要求 Carbon steel tyres for railway
rolling stock -- Quality requirements
JIS E5401-2-1998 铁路车辆用碳钢轮箍.轮心和罩胎轮.尺寸、平衡和组装要求
鉄道車両用炭素鋼タイヤ ― 輪心及びタイヤ付車輪 ― 寸法，釣合い及び組立の要求事項 Carbon
steel tyres for railway rolling stock -- Wheel
centres and tyred wheels -- Dimensional, balancing
and assembly requirements
JIS F3443-1995 船用小型钢制滑轮
船用小形鋼製滑車 Ships' small size steel blocks
JIS G0201-2000 钢铁用术语汇编(热处理)
鉄鋼用語（熱処理） Glossary of terms used in iron and
steel (Heat treatment)
JIS G0202-1987 钢铁术语汇编(试验)
鉄鋼用語（試験） Glossary of terms used in iron and
steel (testing)
JIS G0571-2003 不锈钢用草酸剂侵蚀试验方法
ステンレス鋼のしゅう酸エッチング試験方法 Method of oxalic acid etching
test for stainless steels
JIS G0572-2006 不锈钢用硫酸盐-硫酸的试验方法
ステンレス鋼の硫酸?硫酸第二鉄腐食試験方法 Method of ferric sulfate-sulfuric
acid test for stainless steel
JIS G0573-1999 不锈钢的65%硝酸腐蚀试验方法
ステンレス鋼の６５％硝酸腐食試験方法 Method of 65 per cent nitric
acid test for stainless steels
JIS G0575-1999 不锈钢的硫酸-硫酸铜腐蚀试验方法
ステンレス鋼の硫酸?硫酸銅腐食試験方法 Method of copper sulfate-sulfuric
acid test for stainless steels
JIS G0576-2001 不锈钢的应力腐蚀断裂试验
ステンレス鋼の応力腐食割れ試験方法 Stress corrosion cracking
test for stainless steels
JIS G0577-2005 不锈钢点蚀电位测量的方法
ステンレス鋼の孔食電位測定方法 Method of pitting potential
measurement for stainless steels
JIS G0578-2000 不锈钢的氯化铁试验方法
ステンレス鋼の塩化第二鉄腐食試験方法 Method of ferric chloride
tests for stainless steels
JIS G0579-1983 不锈钢阳极极化测量的方法
ステンレス鋼のアノード分極曲線測定方法 Method for making anodic
polarization measurement for stainless steels
JIS G0580-2003 不锈钢用电化学势动再活化比率测量方法
ステンレス鋼の電気化学的再活性化率の測定方法 Method of electrochemical
potentiokinetic reactivation ratio measurement
for stainless steels
JIS G0590-2005 不锈钢临界点蚀温度的测量方法
ステンレス鋼の臨界孔食温度測定方法 Method of critical pitting
temperature measurement for stainless steels
JIS G0591-2000 不锈钢的硫酸试验方法
ステンレス鋼の硫酸腐食試験方法 Method of sulfuric acid test
for stainless steels
JIS G0592-2002 不锈钢裂隙腐蚀再钝化电位的测定方法
ステンレス鋼の腐食すきま再不動態化電位測定方法 Method of determining
the repassivation potential for crevice corrosion
of stainless steels
JIS G0595-2004 不锈钢大气腐蚀的锈斑和和锈蚀的测量方法
ステンレス鋼の表面さび発生程度評価方法 Rating method of rust and
stain of atmospheric corrosion for stainless
steels
JIS G0702-1995 连续式钢材加热炉的热平衡方法
連続鋼材加熱炉の熱勘定方式 Method of heat balance for continuous
reheating furnace for steel
JIS G0802-1998 不锈钢板的超声检验
ステンレス鋼板の超音波探傷検査方法 Ultrasonic examination of
stainless steel plates
JIS G1201-2001 钢铁.分析方法通则
鉄及び鋼 ― 分析方法通則 Iron and steel -- General rules
for analytical methods
JIS G1211-1995 钢铁.碳含量的测量方法
鉄及び鋼 ― 炭素定量方法 Iron and steel -- Methods for
determination of carbon content
JIS G1212-1997 钢铁.硅含量的测定方法
鉄及び鋼 ― けい素定量方法 Iron and steel -- Methods for
determination of silicon content
JIS G1213-2001 钢铁.锰含量的测定方法
鉄及び鋼 ― マンガン定量方法 Iron and steel -- Methods for
determination of manganese content
JIS G1214-1998 钢铁.磷含量的测定方法
鉄及び鋼 ― りん定量方法 Iron and steel -- Methods for
determination of phosphorus content
JIS G1215-1994 钢铁中硫的定量分析方法
鉄及び鋼 ― 硫黄定量方法 Iron and steel -- Methods for
determination of sulfur content
JIS G1215-1994
AMENDMENT 1:1999 鉄及び鋼 ― 硫黄定量方法（追補１） Iron and
steel -- Methods for determination of sulfur
content (Amendment 1)
JIS G1216-1997 钢铁.镍含量的测定方法
鉄及び鋼 ― ニッケル定量方法 Iron and steel -- Methods for
determination of nickel content
JIS G1218-1994 钢铁.钼含量的测定方法
鉄及び鋼 ― モリブデン定量方法 Iron and steel -- Methods for
determination of molybdenum content
JIS G1219-1997 钢铁.铜含量的测定方法
鉄及び鋼 ― 銅定量方法 Iron and steel -- Methods for determination
of copper content
JIS G1220-1994 钢铁.钨含量的测定方法
鉄及び鋼 ― タングステン定量方法 Iron and steel -- Methods
for determination of tungsten content
JIS G1221-1998 钢铁.钒含量的测定方法
鉄及び鋼 ― バナジウム定量方法 Iron and steel -- Methods for
determination of vanadium content
JIS G1222 AMD 1-1999 钢铁中钴的测定方法(补充文件1)
Methods for determination of cobalt in iron
and steel (Amendment 1)
JIS G1223-1997 钢铁.钛含量的测定方法
Iron and steel -- Methods for determination
of titanium content
JIS G1224-2001 钢铁.铝含量的测定方法
Iron and steel -- Methods for determination
of aluminium content
JIS G1225-2006 钢铁.砷含量的测定方法
Iron and steel -- Methods for determination
of arsenic content
JIS G1226-1994 钢铁.锡含量的测定方法
Iron and steel -- Method for determination of
tin content
JIS G1228-1997 钢铁中氮含量的测定方法
Iron and steel -- Methods for determination
of nitrogen content
JIS G1228 AMD 1-2006 钢铁.氮含量的测定方法(修改件1)
Iron and steel -- Methods for determination
of nitrogen content (Amendment 1)
JIS G1235-1981 钢铁中锑含量的测定方法
鉄及び鋼中のアンチモン定量方法 Methods for determination of
antimony in iron and steel
JIS G1237-1997 钢铁.铌含量的测定方法
鉄及び鋼 ― ニオブ定量方法 Iron and steel -- Methods for
determination of niobium content
JIS G1253-2002 钢铁.火花放电原子发射光谱分析法
鉄及び鋼 ― スパーク放電発光分光分析方法 Iron and steel -- Method
for spark discharge atomic emission spectrometric
analysis
JIS G1256-1997 钢铁.X射线荧光光谱分析法
鉄及び鋼 ― 蛍光Ｘ線分析方法 Iron and steel -- Method for
X-ray fluorescence spectrometric analysis
JIS G1257-1994 钢铁.原子吸收光谱分析方法
鉄及び鋼 ― 原子吸光分析方法 Iron and steel -- Methods for
atomic absorption spectrometric analysis
JIS G1257 AMD 1-1999 钢铁.原子吸收光谱分析方法(补充件1)
鉄及び鋼 ― 原子吸光分析方法（追補１） Iron and steel -- Methods
for atomic absorption spectrometric analysis
(Amendment 1)
JIS G1257 AMD 2-2000 钢铁.原子吸收光谱分析法(修改件2)
鉄及び鋼 ― 原子吸光分析方法（追補２） Iron and steel -- Methods
for atomic absorption spectrometric analysis
(Amendment 2)
JIS G1258-1999 钢铁.电感耦合等离子体的原子发光光谱测量法
Iron and steel -- Methods for inductively coupled
plasma atomic emission spectrometry
JIS G1258 AMD 1-2000 钢铁.感应耦合等离子体原子发射光谱法(修改件1)
Iron and steel -- Methods for inductively coupled
plasma atomic emission spectrometry (Amendment
1)
JIS G2401-1979 废钢铁的分类标准
鉄くず分類基準 Classification standard for iron and
steel scraps
JIS G2402-2002 钢铁制造中铝杂质
鉄鋼用アルミニウムドロス Aluminium dross for iron and steel
making
JIS G2402 AMD 1-2005 钢铁制造用铝废渣(修改件1)
鉄鋼用アルミニウムドロス（追補１） Aluminium dross for iron and
steel making (Amendment 1)
JIS G3101-2004 普通结构用轧制钢材
一般構造用圧延鋼材 Rolled steels for general structure
JIS G3106-2004 焊接结构用轧制钢材
溶接構造用圧延鋼材 Rolled steels for welded structure
JIS G3108-2004 冷光拉钢棒用轧制钢材
みがき棒鋼用一般鋼材 Rolled carbon steel for cold-finished
steel bars
JIS G3111-2005 半成品碳钢
再生鋼材 Rerolled carbon steel
JIS G3114-2004 焊接结构用耐大气腐蚀热轧钢材
溶接構造用耐候性熱間圧延鋼材 Hot-rolled atmospheric corrosion
resisting steels for welded structure
JIS G3125-2004 高级耐大气腐蚀轧制钢材
高耐候性圧延鋼材 Superior atmospheric corrosion resisting
rolled steels
JIS G3131-2005 热轧低碳钢板、薄板和钢带
熱間圧延軟鋼板及び鋼帯 Hot-rolled mild steel plates, sheets
and strips
JIS G3133-2004 涂搪瓷用脱碳钢板和钢带
ほうろう用脱炭鋼板及び鋼帯 Decarburized steel sheets and
strip for porcelain enamelling
JIS G3192-2005 热轧型钢的尺寸、质量及其允许误差
熱間圧延形鋼の形状，寸法，質量及びその許容差 Dimensions, mass and
permissible variations of hot rolled steel sections
JIS G3214-1991 压力容器用不锈钢锻件
圧力容器用ステンレス鋼鍛鋼品 Stainless steel forgings for
pressure vessels
JIS G3315-2002 镀铬无锡钢材
ティンフリースチール Chromium plated tin free steel
JIS G3320-1999 覆层不锈钢薄板
塗装ステンレス鋼板 Coated stainless steel sheets
JIS G3353-1990 一般结构用工字型轻型焊接钢材
一般構造用溶接軽量Ｈ形鋼 Welded light gauge H steels for
general structures
JIS G3446-2004 机械和结构用不锈钢钢管
機械構造用ステンレス鋼鋼管 Stainless steel pipes for machine
and structural purposes
JIS G3447-2004 不锈钢卫生管
ステンレス鋼サニタリー管 Stainless steel sanitary pipes
JIS G3448-2004 普通管路用轻型不锈钢钢管
一般配管用ステンレス鋼管 Light gauge stainless steel tubes
for ordinary piping
JIS G3459-2004 不锈钢钢管
配管用ステンレス鋼管 Stainless steel pipes
JIS G3463-2006 锅炉与热交换器用不锈钢钢管
ボイラ?熱交換器用ステンレス鋼鋼管 Stainless steel boiler and
heat exchanger tubes
JIS G3468-2004 大口径焊接不锈钢管
配管用溶接大径ステンレス鋼管 Large diameter welded stainless
steel pipes
JIS G3505-2004 低碳钢线材
軟鋼線材 Low carbon steel wire rods
JIS G3506-2004 高碳钢线材
硬鋼線材 High carbon steel wire rods
JIS G3532-2000 低碳钢丝
鉄線 Low carbon steel wires
JIS G3546-2000 异型钢丝钢丝绳
異形線ロープ Wire ropes with profile wires
JIS G3547-1993 镀锌低碳钢丝
亜鉛めっき鉄線 Zinc-coated low carbon steel wires
JIS G3550-2003 结构用不锈钢丝绳
構造用ステンレス鋼ワイヤロープ Stainless steel wire ropes for
structure
JIS G3557-2004 通用不锈钢丝绳
一般用ステンレス鋼ワイヤロープ Stainless steel wire ropes for
general purposes
JIS G3601-2002 不锈钢包层钢
ステンレスクラッド鋼 Stainless-clad steels
JIS G4303-2005 不锈钢棒
ステンレス鋼棒 Stainless steel bars
JIS G4304-2005 热轧不锈钢板材、薄板和带材
熱間圧延ステンレス鋼板及び鋼帯 Hot-rolled stainless steel plates,
sheet and strip
JIS G4305-2005 冷轧不锈钢板材、薄板和带材
冷間圧延ステンレス鋼板及び鋼帯 Cold-rolled stainless steel
plate, sheet and strip
JIS G4308-1998 不锈钢盘条
ステンレス鋼線材 Stainless steel wire rods
JIS G4308-1998/AMENDMENT 不锈钢盘条(修改件1)
ステンレス鋼線材（追補１） Stainless steel wire rods (Amendment
1)
JIS G4309-1999 不锈钢丝
ステンレス鋼線 Stainless steel wires
JIS G4310-1999 不锈钢板、薄板及耐热钢板、薄板的质量计算方法
ステンレス鋼板及び耐熱鋼板質量算出方法 Method of mass calculation
for stainless steel plates and sheets, and heat-resisting
steel plates and sheets
JIS G4313-1996 弹簧用冷轧不锈钢带
ばね用ステンレス鋼帯 Cold rolled stainless steel strip
for springs
JIS G4314-1994 弹簧用不锈钢丝
ばね用ステンレス鋼線 Stainless steel wires for springs
JIS G4315-2000 冷镦和冷锻用不锈钢丝
冷間圧造用ステンレス鋼線 Stainless steel wires for cold
heading and cold forging
JIS G4316-1991 焊接用不锈钢丝
溶接用ステンレス鋼線材 Stainless steel wire rods for welding
JIS G4317-2005 热轧不锈钢型材
熱間成形ステンレス鋼形鋼 Hot-formed stainless steel sections
JIS G4318-1998 冷精轧不锈钢棒
冷間仕上ステンレス鋼棒 Cold finished stainless steel bars
JIS G4318-1998
AMENDMENT 2007 冷間仕上ステンレス鋼棒（追補１） Cold finished
stainless steel bars (Amendment 1)
JIS G4319-1991 不锈钢锻件用初轧坯和钢坯
ステンレス鋼鍛鋼品用鋼片 Stainless steel blooms and billets
for forgings
JIS G4320-2003 冷成形不锈钢型材
冷間成形ステンレス鋼形鋼 Cold-formed stainless steel sections
JIS G4321-2000 建筑结构用不锈钢
建築構造用ステンレス鋼材 Stainless steel for building structure
JIS G4804-2008 硫黄及び硫黄複合快削鋼鋼材 Free-cutting steels
JIS G7105 ERRATUM 1-2001 热处理钢、合金钢和易切削碳钢.第18部分:非合金钢和低合金钢制光亮产品(勘误
1) Heat-treatable steels, alloy steels and free-cutting
steels -- Part 18: Bright products of unalloyed
and low alloy steels (Erratum 1)
JIS G7222-2003 承压用无缝钢管.交货技术条件.第4部分:奥氏体不锈钢(ISO规范)
Seamless steel tubes for pressure purposes --
Technical delivery conditions -- Part 4: Austenitic
stainless steels (ISO specifications)
JIS G7226-2003 承压用焊接钢管.交货技术条件.第6部分:纵向焊接的奥氏体不锈钢管(ISO规范)
Welded steel tubes for pressure purposes --
Technical delivery conditions -- Part 6: Longitudinally
welded austenitic stainless steel tubes (ISO
specifications)
JIS G7401-2000 冷镦或冷挤压加工用钢材
冷間圧造及び冷間押出し用鋼（ＩＳＯ仕様） Steels for cold heading
and cold extruding
JIS G7602-2000 弹簧用不锈钢.第1部分:线材
ばね用ステンレス鋼 ― 第１部：線（ＩＳＯ仕様） Stainless steels for
springs -- Part 1: Wire
JIS H8610-1999 钢铁上的电镀锌层
電気亜鉛めっき Electroplated coatings of zinc on iron
or steel
JIS H8611-1999 钢铁上的电镀镉层
電気カドミウムめっき Electroplated coatings of cadmium
on iron or steel
JIS S2053-1994 不锈钢制暖水瓶
ステンレス鋼製まほうびん Stainless steel vacuum bottles
JIS T6103-2005 牙科用不锈钢丝
歯科用ステンレス鋼線 Stainless steel wires for dental
use
JIS T7403-1-2005 外科植入物用铁基合金.第1部分:锻制不锈钢
外科インプラント用鉄基合金－第１部：ステンレス鋼 Iron based alloys for
surgical implant applications -- Part 1: Wrought
stainless steel
JIS T7403-2-2005 外科植入物用不锈钢基合金.第2部分:锻制的高氮不锈钢
外科インプラント用鉄基合金－第２部：高窒素ステンレス鋼 Stainless steel
based alloys for surgical implant applications
-- Part 2: Wrought high nitrogen stainless steel
JIS W1106-1993 航空航天.奥氏体不锈钢部件的表面处理
航空宇宙 ― オーステナイト系ステンレス鋼製部品の表面処理 Aerospace -- Surface
treatment of austenitic stainless steel parts
JIS W1107-1993 航空航天.淬火不锈钢零部件的表面处理
航空宇宙 ― 硬化性ステンレス鋼製部品の表面処理 Aerospace -- Surface
treatment of hardenable stainless steel parts
JIS Z3106-2001 不锈钢焊接接点的放射线检验方法
ステンレス鋼溶接継手の放射線透過試験方法 Methods of radiographic
examination for welded joints in stainless steel
JIS Z3119-2006 奥氏体和奥氏体铁酸盐不锈钢电镀金属中铁素体含量的测定方法
オーステナイト系及びオーステナイト?フェライト系ステンレス鋼溶着金属のフェライト量の測定方法
Methods of measurement for ferrite content in
austenitic and austenitic-ferritic stainless
steel deposited metals
JIS Z3183-1993 碳钢及低合金钢埋弧焊堆焊金属的分级及试验方法
炭素鋼及び低合金鋼用サブマージアーク溶着金属の品質区分及び試験方法 Classification
and testing methods for deposited metal of submerged
arc welding for carbon steel and low alloy steel
JIS Z3201-2001 低碳钢用气焊条
軟鋼用ガス溶加棒 Gas welding rods for mild steel
JIS Z3201-2001
AMENDMENT 1:2008 低碳钢用气焊条(修改件1)
軟鋼用ガス溶加棒（追補１） Gas welding rods for mild steel
(Amendment 1)
JIS Z3211-2000 低碳钢用涂覆电焊条
軟鋼用被覆アーク溶接棒 Covered electrodes for mild steel
JIS Z3221-2003 不锈钢涂剂焊条
ステンレス鋼被覆アーク溶接棒 Stainless steel covered electrodes
JIS Z3312-1999 低碳钢及高强度钢用金属极活性气体保护电弧实心焊丝
軟鋼及び高張力鋼用マグ溶接ソリッドワイヤ MAG welding solid wires
for mild steel and high strength steel
JIS Z3312 AMD 1-2006 低碳钢及高强度钢用金属极活性气体保护电弧实芯焊丝(修改件1)
軟鋼及び高張力鋼用マグ溶接ソリッドワイヤ（追補１） MAG welding solid
wires for mild steel and high strength steel
(Amendment 1)
JIS Z3313-1999 低碳钢、高强度钢和低温钢用气保护和自保护金属电弧焊用管状焊丝
軟鋼，高張力鋼及び低温用鋼用アーク溶接フラックス入りワイヤ Flux cored wires
for gas shielded and self-shielded metal arc
welding of mild steel, high strength steel and
low temperature service steel
JIS Z3313 AMD 1-2006 低碳钢、高强度钢和低温钢用气保护和自保护金属电弧焊用管状焊丝(修改件1)
軟鋼，高張力鋼及び低温用鋼用アーク溶接フラックス入りワイヤ（追補１） Flux cored
wires for gas shielded and self-shielded metal
arc welding of mild steel, high strength steel
and low temperature service steel (Amendment
1)
JIS Z3316-2001 低碳钢及低合金钢用惰性气体保护钨极电弧焊条及焊丝
軟鋼及び低合金鋼用ティグ溶加棒及びソリッドワイヤ TIG welding rods and
solid wires for mild steel and low alloy steel
JIS Z3321-2003 不锈钢焊条和焊丝
溶接用ステンレス鋼溶加棒及びソリッドワイヤ Stainless steel, welding
rods and solid wires
JIS Z3321-2007
AMENDMENT 溶接用ステンレス鋼溶加棒及びソリッドワイヤ（追補１） Stainless
steel, welding rods and solid wires (Amendment
1)
JIS Z3322-2002 用带状电极进行不锈钢搭接焊的材料
ステンレス鋼帯状電極肉盛溶接材料 Materials for stainless steel
overlay welding with strip electrode
JIS Z3323-2003 不锈钢管状焊丝
ステンレス鋼アーク溶接フラックス入りワイヤ及び溶加棒 Stainless steel flux
cored wires
JIS Z3324-1999 埋弧焊用不锈钢实心焊丝及焊剂
ステンレス鋼サブマージアーク溶接ソリッドワイヤ及びフラックス Stainless steel
solid wires and fluxes for submerged arc welding
JIS Z3324-1999
AMENDMENT 2007 ステンレス鋼サブマージアーク溶接ソリッドワイヤ及びフラックス（追補１）
Stainless steel solid wires and fluxes for submerged
arc welding (Amendment 1)
JIS Z3324 ERRATUM 1-2001 埋弧焊接用不锈钢实心焊丝和焊剂(勘误1)
Stainless steel solid wires and fluxes for submerged
arc welding (Erratum 1)
JIS Z3351-1999 碳钢及低合金钢用埋弧焊实心焊丝
炭素鋼及び低合金鋼用サブマージアーク溶接ソリッドワイヤ Submerged arc welding
solid wires for carbon steel and low alloy steel
JIS Z3352-1988 碳钢及低合金钢用埋弧焊焊剂
炭素鋼及び低合金鋼用サブマージアーク溶接フラックス Submerged arc welding
fluxes for carbon steel and low alloy steel
JIS Z3353-1999 低碳钢而高强度钢用电渣焊实心焊丝和焊剂 Electroslag
welding solid wires and fluxes for mild steel
and high strength steel
JIS Z3607-1994 碳钢摩擦焊接的推荐实用规程 Recommended practice
for friction welding of carbon steel
JIS Z3821 ERRATUM 1-2001 不锈钢焊接技术合格鉴定标准程序(勘误1)
Standard qualification procedure for welding
technique of stainless steel (Erratum 1)
JIS Z3821-2001 不锈钢焊接技术合格鉴定标准程序 Standard qualification
procedure for welding technique of stainless
steel
美国钢铁标准(Steel standards)
ANSI B11.5-1988 机床.钢铁制品.制造、维护和使用的安全要求 Machine
Tools - Ironworkers - Safety Requirements for
Construction, Care and Use
ANSI LC-1-2005 使用波纹不锈钢管(CSST)的燃气管道系统 Fuel Gas
Piping System Using Corrugated Stainless Steel
Tubing (CSST) (same as CSA 6.26)
ANSI/AGA LC-1-1991 使用波纹不锈钢管的室内燃气管线系统 Interior
Fuel Gas Piping Systems Using Corrugated Stainless
Steel Tubing
ANSI/AGA LC-1a-1993 使用波纹不锈钢管的室内燃气管线系统 Interior
Fuel Gas Piping Systems Using Corrugated Stainless
Steel Tubing
ANSI/AGA LC-1b-1994 使用波纹不锈钢管的室内燃气管线系统 Interior
Fuel Gas Piping Systems Using Corrugated Stainless
Steel Tubing
ANSI/ASME A112.19.3M-1987 不锈钢卫生设备(家庭专用型) Stainless
Steel Plumbing Fixtures (Designed for Residential
Use)
ANSI/ASME B36.19M-2004 不锈钢管 Stainless Steel
Pipe
ANSI/ASTM A193/A 193M-2001 高温设备用合金钢和不锈钢螺栓材料规范
Specification for Alloy-Steel and Stainless
Steel Bolting Materials for High-Temperature
Service
ANSI/ASTM A312/A 312M-2001 无缝和焊接奥氏体不锈钢管规范 Specification
for Seamless and Welded Austenitic Stainless
Steel Pipes
ANSI/ASTM A480/A 480M-2001 平轧不锈钢及耐热钢板、薄板及带材一般要求规范
Specification for General Requirements for Flat-Rolled
Stainless and Heat-Resisting Steel Plate, Sheet,
and Strip
ANSI/ASTM A688/A 688M-2001 奥氏体不锈钢焊接给水加热器管规范
Specification for Welded Austenitic Stainless
Steel Feedwater Heater Tubes
ANSI/ASTM A789/A 789M-2001 普通设备用无缝与焊接铁素体/奥氏体不锈钢管规范
Specification for Seamless and Welded Ferritic/Austenitic
Stainless Steel Tubing for General Service
ANSI/ASTM A814/A 814M-2001 冷加工焊接奥氏体不锈钢管规范 Specification
for Cold-Worked Welded Austenitic Stainless
Steel Pipe
ANSI/ASTM A815/A 815M-2001 锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件规范
Specification for Wrought Ferritic, Ferritic/Austenitic,
and Martensitic Stainless Steel Piping Fittings
ANSI/ASTM A908-1996 不锈钢针管规范 Specification for
Stainless Steel Needle Tubing
ANSI/ASTM F2098-2004 保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的试验方法
Test Method for Stainless Steel Clamps for Securing
SDR9 Cross-Linked Polyethylene (PEX) Tubing
to Metal Insert Fittings
ANSI/AWS A4.2M/A 4.2-1997 奥氏体和双奥氏体-铁素体不锈钢焊接金属中δ铁酸盐含量测试磁仪器的校准程序
Calibrating Magnetic Instruments to Measure
the Delta Ferrite Content of Austenitic and
Duplex Austenitic-Ferrite Stainless Steel Weld
Metal, Procedures for
ANSI/AWS A5.22-2005 助溶剂芯弧焊用不锈钢焊条和钨电极惰性气体保护焊用不锈钢助溶剂芯焊条规范
Specification for Stainless Steel Electrodes
for Flux Cored Arc Welding and Stainless Steel
Flux Cored Rods for Gas Tungsten Arc Welding
ANSI/AWS B2.1-1/8-006-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的气体保护金属极电弧焊
Gas Metal Arc Welding of Carbon Steel to Austentic
Stainless Steel (M-1 to M-18, or P-8), 10 through
18 Gage, in the as-Welded Condition, with or
without Backing
ANSI/AWS B2.1-1/8-010-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的钨电极惰性气体保护焊
Gas Tungsten Arc Welding of Carbon Steel to
Austentic Stainless Steel (M-1 to M-8 or P-8),
10 through 18 Gage, in the as-Welded Condition,
with or without Backing
ANSI/AWS B2.1-1/8-014-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的保护金
Standard Welding Procedure Specification - Shielded
Metal Arc Welding of Carbon Steel to Austenitic
Stainless Steel (M-1 to M-8 or P-8), 10 through
18 Gage, in the as-Welded Condition, with or
without Backing
ANSI/AWS B2.1-1/8-228-2002 碳钢与奥氏体不锈钢屏蔽金属电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-8/P-8/S-8,
组1)1/8到1-1/2英寸厚,ER309 Welding Procedure Specification
(WPS) for Shielded Metal Arc Welding of Carbon
Steel to Austenitic Stainless Steel (M-1/P-1/S-1
Groups 1 and 2 Welded to M-8/P-8/S-8, Group
1) 1/8 through 1-1/2 inch thick, ER309-15, 16
or, 17, As-Welded Condition, Primarily Pipe
Applications
ANSI/AWS B2.1-1/8-229-2002 碳钢与奥氏体不锈钢气体钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-
8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER30 Welding Procedure
Specification (WPS) for Gas Tungsten Arc Welding
Followed by Carbon Steel to Austenitic Stainless
Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to
M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch
thick, ER309 and E309-15, 16, or 17, As-Welded
Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1/8-230-2002 气体保护钨极弧焊的标准焊接程序规范(WPS),可熔嵌入根部的,碳钢与奥氏体不锈钢(M-1/P-1/S-1,
组 1 和 2 焊 Standard Welding Procedure Specification
(WPS) for Gas Tungsten Arc Welding, with Consumable
Insert Root, of Carbon Steel to Austenitic Stainless
Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to
M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch
thick, IN309 and ER309, As-Welded Condition,
Primarily Pipe Applications
ANSI/AWS B2.1-1/8-231-2002 带可熔嵌入焊条的碳钢与奥氏体不锈钢气体保护钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-
8/P-8/S-8, 组1) Welding Procedure Specification
(WPS) for Gas Tungsten Arc Welding, with Consumable
Insert Root, Followed by Shielded Metal Arc
Welding of Carbon Steel to Austenitic Stainless
Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to
M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch
thick, IN309, ER309, and E309-15, 16, or, 17,
As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-8-005-2002 在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8或P-8)的气体保护金属极电弧焊
Gas Metal Arc Welding of Austentic Stainless
Steel (M-8 or P-8) 10 through 18 Gage, in the
as-Welded Condition, with or without Backing
ANSI/AWS B2.1-8-009-2002 在焊接条件下、有或没有垫板、10到18规格的不锈钢(M-8或P-8)的钨电极惰性气体保护焊
Gas Tungsten Arc Welding of Stainless Steel
(M-8 or P-8), 10 through 18 Gage, in the as-Welded
Condition, with or without Backing
ANSI/AWS B2.1-8-013-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8/P-8)的保护金属电弧焊
Standard Welding Procedure Specification - Shielded
Metal Arc Welding of Austenitic - Stainless
Steel (M-8/P-8), 10 through 18 Gage, in the
as-Welded Condition, with or without Backing
ANSI/AWS B2.1-8-023-2005 在焊接条件下1/8到1-1/2英尺厚奥氏体不锈钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-8/P-8/S-8,1组)
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Austenitic
Stainless Steel (M-8/P-8/S-8, Group 1), 1/8
through 1-1/2 inch Thick, As-Welded Condition
ANSI/AWS B2.1-8-024-2001 在焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的焊接程序规范
(WP Welding Procedure Specification (WPS) for
Gas Tungsten Arc Welding of Austenitic Stainless
Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2
inch thick, As-Welded Condition
ANSI/AWS B2.1-8-025-2001 在焊接条件下、保护金属电弧焊之后的1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保
Welding Procedure Specification (WPS) for Gas
Tungsten Arc Welding followed by Shielded Metal
Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8,
Group 1) 1/8 through 1-1/2 inch thick, As-Welded
Condition
ANSI/AWS B2.1-8-212-2001 主要用于管道的、在ERXX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding of Austenitic Stainless
Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2
inch Thick ERXX, As-Welded Condition, Primarily
Pipe Applications
ANSI/AWS B2.1-8-213-1997 主要用于管道的、在焊接条件下(M-8/P-8/S-8,组)1/8到1-1/2英寸E3XX-XX奥氏体不锈钢的药皮焊条电弧焊的标准
Standard Welding Procedure Specification (WPS)
for Shielded Metal Arc Welding of Austenitic
Stainless Steel (M-8/P-8/S-8, Group), 1/8 through
1-1/2 inch Thick E3XX-XX, As-Welded Condition,
Primarily Pipe Applications
ANSI/AWS B2.1-8-214-2001 标准焊接程序规范(WPS).主要用于管道的,在焊接条件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奥氏体不锈钢
(M-8/P Standard Welding Procedure Specification
(WPS) for Gas Tungsten Arc Welding Followed
by Shielded Metal Arc Welding of Austenitic
Stainless Steel (M-8/P-8/S-8, Group), 1/8 through
1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition,
Primarily Pipe Applications
ANSI/AWS B2.1-8-215-2001 在 IN3XX和ER3XX焊接条件下、1/8到1-1/2英寸厚的自耗嵌入式奥氏体不锈钢(M-8/P-8/S-8,组1)钨电极惰性气体保
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding, with Consumable
Insert of Austenitic Stainless Steel (M-8/P-8/S-8,
Group 1) 1/8 through 1-1/2 Inch Thick IN3XX
and ER3XX, As-Welded Condition
ANSI/AWS B2.1-8-216-2001 标准焊接程序规范(WPS).焊接用,
1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奥氏体不锈钢(M-8/P-8/S-8,组1)的
Standard Welding Procedure Specification (WPS)
for Gas Tungsten Arc Welding, with Consumable
Insert Followed by Shielded Metal Arc Welding
of Austenitic Stainless Steel (M-8/P-8/S-8,
Group 1) 1/8 through 1-1/2 inch Thick IN3XX,
ER3XX, and E3XX-XX, As-Welded Condition
ANSI/AWS B2.1.009-1990 10至18号有或无背衬焊态条件下不锈钢(M-8或P-8)钨极气弧焊接
Gas Tungsten Arc Welding of Stainless Steel
(M-8 or P-8), 10 through 18 Gage, in the as-Welded
Condition, with or without Backing
ANSI/AWS B2.1.013-1991 在焊接条件下、有或没有垫板、10到18规格(M-8/P-8)奥氏体不锈钢的药皮焊条电弧焊的标准焊接程序规范(WPS)
Standard Welding Procedure Specification - Shielded
Metal Arc Welding of Austenitic - Stainless
Steel (M-8/P-8), 10 through 18 Gage, in the
as-Welded Condition, with or without Backing
ANSI/AWS B2.1.014-1991 在焊接条件下、有或没有垫板、10到18规格(M-1到M-8/P-8)奥氏体不锈钢的药皮焊条电弧焊的标准焊接程序规范
(W Standard Welding Procedure Specification
- Shielded Metal Arc Welding of Carbon Steel
to Austenitic Stainless Steel (M-1 to M-8 or
P-8), 10 through 18 Gage, in the as-Welded Condition,
with or without Backing
ANSI/AWS D1.6-1999 结构焊接代码.不锈钢 Structural Welding
Code - Stainless Steel
ANSI/AWS D10.4-1986 焊接奥氏体铬镍不锈钢管推荐惯例 Welding
Austenitic Chromium-Nickel Stainless Steel Piping
and Tubing, Recommended Practices for
ANSI/AWS D18.1-1999 卫生洁具用奥氏体不锈钢管和管道的焊接规范 Specification
for Welding of Austenitic Stainless Steel Tube
and Pipe Systems in Sanitary (Hygenic) Applications
ANSI/AWS D18.2-1999 奥氏体不锈钢管内部焊接褪色度指南 Guide to
Weld Discoloration Levels on Inside of Austenitic
Stainless Steel Tube
ANSI/AWWA C220-1998 4in(100mm)及以上尺寸的不锈钢管 Stainless
Steel Pipe 4 in (100 mm) and Larger
ANSI/AWWA C220a-1999 不锈钢管.4英寸.(100 mm) 及更大.
ANSI/AWWA C220a-98的附录 Stainless Steel Pipe,
4 In. (100 mm) and Larger, Addendum to ANSI/AWWA
C220a-98
ANSI/AWWA C223-2002 结构钢和不锈钢开口套管 Fabricated Steel
and Stainless Steel Tapping Sleeves
ANSI/AWWA C561-2004 装配式不锈钢推拉门的AWWA标准 AWWA Standard
for Fabricated Stainless Steel Slide Gates
ANSI/NAAMM HMMA866-2001 不锈钢空心金属门和框架指导性规范 Guide
Specifications for Stainless Steel Hollow Metal
Doors and Frames
ANSI/SAE J230-1994 SAE 30302不锈钢弹簧丝和弹簧 Stainless
Steel, SAE 30302, Spring Wire and Springs
ANSI/SAE J405-1998 SAE锻制不锈钢的化学成分 Chemical Compositions
of SAE Wrought Stainless Steels
ANSI/UL 6A-2003 电器用刚性金属导管.铝、青铜及不锈钢 Electrical
Rigid Metal Conduit - Aluminum, Bronze and Stainless
Steel
ASME A112.19.3 Supplement 1-20 不锈钢卫生设备(为住宅使用设计).补充件1
(Stainless steel plumbing fixtures (designed
for residential use); Supplement 1)
ASME A112.3.1-1993 在地上/地下,卫生、暴雨和化工用不锈钢排水系统的安装程序和性能标准
(Performance standard and installation procedures
for stainless steel drainage systems for sanitary,
storm, and chemical applications, above and
below ground)
ASME B36.19M-1985 不锈钢管 (Stainless steel pipe)
ASME BPVC Section 2 Part A-200 ASME锅炉和压力容器规程.第2节:材料.第A部分:钢铁材料规范
(ASME Boiler & Pressure Vessel Code - Section
2: Materials; Part A: Ferrous Material Specifications)
ASTM A 1010-2000 高强度马氏体不锈钢板、薄板和带材标准规范 Standard
Specification for Higher-Strength Martensitic
Stainless Steel Plate, Sheet , and Strip
ASTM A 1010/A 1010M-2001 高强度马氏体不锈钢板材、薄板和带材的标准规范
Standard Specification for Higher-Strength Martensitic
Stainless Steel Plate, Sheet , and Strip
ASTM A 1016/A 1016Ma-2004 铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范
Standard Specification for General Requirements
for Ferritic Alloy Steel, Austenitic Alloy Steel,
and Stainless Steel Tubes
ASTM A 1021/A 1021M-2005 高温设备用马氏体不锈钢锻件和锻坯的标准规范
Standard Specification for Martensitic Stainless
Steel Forgings and Forging Stock for High-Temperature
Service
ASTM A 153/A 153M-2005 钢铁制金属构件上镀锌层(热浸)的标准规范
Standard Specification for Zinc Coating (Hot-Dip)
on Iron and Steel Hardware
ASTM A 167-1999 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范 Standard
Specification for Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and Strip
ASTM A 217/A 217M-2004 高温设备承压部件用合金钢和马氏体不锈钢铸件标准规范
Standard Specification for Steel Castings, Martensitic
Stainless and Alloy, for Pressure-Containing
Parts, Suitable for High-Temperature Service
ASTM A 240/A 240Mb-2006 压力容器和通用铬及铬镍不锈钢板、薄板材及带材标准规范
Standard Specification for Chromium and Chromium-Nickel
Stainless Steel Plate, Sheet, and Strip for
Pressure Vessels and for General Applications
ASTM A 262a-2002 探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范 Standard
Practices for Detecting Susceptibility to Intergranular
Attack in Austenitic Stainless Steels
ASTM A 263-2003 包铬的不锈钢板标准规范 Standard Specification
for Stainless Chromium Steel-Clad Plate
ASTM A 268/A 268Ma-2005 通用无缝和焊接铁素体与马氏体不锈钢管的标准规范
Standard Specification for Seamless and Welded
Ferritic and Martensitic Stainless Steel Tubing
for General Service
ASTM A 269-2004 通用无缝和焊接奥氏体不锈钢管标准规范 Standard
Specification for Seamless and Welded Austenitic
Stainless Steel Tubing for General Service
ASTM A 270a-2003 卫生设施用无缝和焊接奥氏体不锈钢管的标准规范 Standard
Specification for Seamless and Welded Austenitic
Stainless Steel Sanitary Tubing
ASTM A 276-2006 不锈钢钢棒和型材的标准规范 Standard Specification
for Stainless Steel Bars and Shapes
ASTM A 313/A 313M-2003 不锈钢弹簧丝的标准规范 Standard
Specification for Stainless Steel Spring Wire
ASTM A 320/A 320Ma-2005 低温设备用合金钢和不锈钢螺栓材料标准规范
Standard Specification for Alloy-Steel and Stainless
Steel Bolting Materials for Low-Temperature
Service
ASTM A 356/A 356M-2005 汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件的标准规范
Standard Specification for Steel Castings, Carbon,
Low Alloy, and Stainless Steel, Heavy-Walled
for Steam Turbines
ASTM A 358/A 358M-2005 高温设备和通用电熔焊奥氏体铬镍不锈钢管标准规范
Standard Specification for Electric-Fusion-Welded
Austenitic Chromium-Nickel Stainless Steel Pipe
for High-Temperature Service and General Applications
ASTM A 368a-1995 不锈钢丝绳的标准规范 Standard Specification
for Stainless Steel Wire Strand
ASTM A 403/A 403M-2006 锻制奥氏体不锈钢管配件的标准规范 Standard
Specification for Wrought Austenitic Stainless
Steel Piping Fittings
ASTM A 453/A 453M-2004 具有同奥氏体不锈钢相似的膨胀系数的耐高温螺栓材料用标准规范
Standard Specification for High-Temperature
Bolting Materials, with Expansion Coefficients
Comparable to Austenitic Stainless Steels
ASTM A 473-2001 不锈钢锻件标准规范 Standard Specification
for Stainless Steel Forgings
ASTM A 478-1997 铬镍不锈钢和耐热钢制的编织钢丝的标准规范 Standard
Specification for Chromium-Nickel Stainless
Steel Weaving and Knitting Wire
ASTM A 479/A 479Ma-2006 锅炉及其它压力容器用不锈钢棒材与型材的标准规范
Standard Specification for Stainless Steel Bars
and Shapes for Use in Boilers and Other Pressure
Vessels
ASTM A 492-1995 不锈钢丝绳的标准规范 Standard Specification
for Stainless Steel Rope Wire
ASTM A 493-1995 冷镦和冷锻不锈钢钢丝的标准规范 Standard Specification
for Stainless Steel Wire and Wire Rods for Cold
Heading and Cold Forging
ASTM A 511-2004 无缝不锈钢机械管道的标准规范 Standard Specification
for Seamless Stainless Steel Mechanical Tubing
ASTM A 554-2003 焊接的不锈钢机械管用标准规范 Standard Specification
for Welded Stainless Steel Mechanical Tubing
ASTM A 555/A 555M-2005 不锈钢丝和线材一般要求的标准规范 Standard
Specification for General Requirements for Stainless
Steel Wire and Wire Rods
ASTM A 564/A 564M-2004 热轧和冷精轧时效硬化不锈钢棒和型材的标准规范
Standard Specification for Hot-Rolled and Cold-Finished
Age-Hardening Stainless Steel Bars and Shapes
ASTM A 565/A 565Ma-2005 高温设备用马氏体不锈钢棒材的标准规范 Standard
Specification for Martensitic Stainless Steel
Bars for High-Temperature Service
ASTM A 580/A 580M-2006 不锈钢线的标准规范 Standard Specification
for Stainless Steel Wire
ASTM A 581/A 581M-1995 高速切削用耐热不锈钢丝的标准规范 Standard
Specification for Free-Machining Stainless Steel
Wire and Wire Rods
ASTM A 581/A 581Mb-1995 快削不锈钢丝和钢条标准规范 Standard
Specification for Free-Machining Stainless Steel
Wire and Wire Rods
ASTM A 582/A 582M-2005 高速切削不锈钢棒材的标准规范 Standard
Specification for Free-Machining Stainless Steel
Bars
ASTM A 609/A 609M-1991 碳素钢,低合金钢和马氏体不锈钢铸件及其超声波检验
Castings, Carbon, Low-Alloy and Martensitic
Stainless Steel, Ultrasonic Examination Thereof
ASTM A 632-2004 通用无缝和焊接奥氏体不锈钢管(小直径)标准规范 Standard
Specification for Seamless and Welded Austenitic
Stainless Steel Tubing (Small-Diameter) for
General Service
ASTM A 666-2003 退火或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁棒用标准规范
Standard Specification for Annealed or Cold-Worked
Austenitic Stainless Steel Sheet, Strip, Plate,
and Flat Bar
ASTM A 688/A 688M-2004 焊接的奥氏体不锈钢给水加热器管用标准规范
Standard Specification for Welded Austenitic
Stainless Steel Feedwater Heater Tubes
ASTM A 693-2006 沉淀硬化不锈钢和耐热钢板材、薄板和带材标准规范 Standard
Specification for Precipitation-Hardening Stainless
and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A 747/A 747M-2004 沉淀硬化不锈钢铸件的标准规范 Standard
Specification for Steel Castings, Stainless,
Precipitation Hardening
ASTM A 763-1993 铁素体不锈钢晶间腐蚀敏感性检测的标准操作规程 Standard
Practices for Detecting Susceptibility to Intergranular
Attack in Ferritic Stainless Steels
ASTM A 774/A 774M-2006 低温和中温一般腐蚀情况下用的焊接锻制奥氏体不锈钢配件标准规范
Standard Specification for As-Welded Wrought
Austenitic Stainless Steel Fittings for General
Corrosive Service at Low and Moderate Temperatures
ASTM A 778-2001 焊接未退火的奥氏体不锈钢管形制品标准规范 Standard
Specification for Welded, Unannealed Austenitic
Stainless Steel Tubular Products
ASTM A 789/A 789Mb-2005 通用无缝和焊接铁素体/奥氏体不锈钢管的标准规范
Standard Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Tubing for
General Service
ASTM A 790/A 790Mb-2005 无缝和焊接铁素体/奥氏体不锈钢管的标准规范
Standard Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Pipe
ASTM A 793-1996 不锈钢轧制楼板的标准规范 Standard Specification
for Rolled Floor Plate, Stainless Steel
ASTM A 799/A 799M-2004 估计铁素体含量的不锈钢铸件仪器校准的标准实施规程
Standard Practice for Steel Castings, Stainless,
Instrument Calibration, for Estimating Ferrite
Content
ASTM A 803/A 803M-2003 焊接铁素体不锈钢给水加热器管用标准规范 Standard
Specification for Welded Ferritic Stainless
Steel Feedwater Heater Tubes
ASTM A 813/A 813M-2001 单或双焊接奥氏体不锈钢管标准规范 Standard
Specification for Single- or Double-Welded Austenitic
Stainless Steel Pipe
ASTM A 814/A 814M-2005 冷加工焊接奥氏体不锈钢管的标准规范 Standard
Specification for Cold-Worked Welded Austenitic
Stainless Steel Pipe
ASTM A 815/A 815M-2004 锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件标准规范
Standard Specification for Wrought Ferritic,
Ferritic/Austenitic, and Martensitic Stainless
Steel Piping Fittings
ASTM A 872/A 872M-2005 腐蚀环境用离心铸造铁素体/奥氏体不锈钢管的标准规范
Standard Specification for Centrifugally Cast
Ferritic/Austenitic Stainless Steel Pipe for
Corrosive Environments
ASTM A 887-1989 核能设备用经硼酸处理的不锈钢板、薄板及带材 Standard
Specification for Borated Stainless Steel Plate,
Sheet, and Strip for Nuclear Application
ASTM A 895-1989 易切削不锈钢板、薄板和带材 Standard Specification
for Free-Machining Stainless Steel Plate, Sheet,
and Strip
ASTM A 90/A 90M-2001 镀锌和镀锌合金钢铁制品镀层重量的标准试验方法
Standard Test Method for Weight [Mass] of Coating
on Iron and Steel Articles with Zinc or Zinc-Alloy
Coatings
ASTM A 928/A 928M-2005 填充金属电熔焊铁素体/奥氏体(二联)不锈钢管标准规范
Standard Specification for Ferritic/Austenitic
(Duplex) Stainless Steel Pipe Electric Fusion
Welded with Addition of Filler Metal
ASTM A 943/A 943M-2001 喷模制无缝奥氏体不锈钢管的标准规范 Standard
Specification for Spray-Formed Seamless Austenitic
Stainless Steel Pipes
ASTM A 947M-1995 构造成的不锈钢薄板的标准规范 Standard Specification
for Textured Stainless Steel Sheet [Metric]
ASTM A 949/A 949M-2001 喷模制无缝铁素体/奥氏体不锈钢管的标准规范
Standard Specification for Spray-Formed Seamless
Ferritic/Austenitic Stainless Steel Pipe
ASTM A 959-2004 规定可锻不锈钢统一标准等级成分的标准指南 Standard
Guide for Specifying Harmonized Standard Grade
Compositions for Wrought Stainless Steels
ASTM A 959c-2004 规定可锻不锈钢统一标准等级成分的标准指南 Standard
Guide for Specifying Harmonized Standard Grade
Compositions for Wrought Stainless Steels
ASTM A 967-2005 不锈钢零件化学钝化处理的标准规范 Standard Specification
for Chemical Passivation Treatments for Stainless
Steel Parts
ASTM A 982/A 982M-2005 压缩机和涡轮机翼片用不锈钢锻件的标准规范
Standard Specification for Steel Forgings, Stainless,
for Compressor and Turbine Airfoils
ASTM A 988/A 988M-2005 高温设备用热等静压压制的不锈钢法兰、配件、阀门和部件的标准规范
Standard Specification for Hot Isostatically-Pressed
Stainless Steel Flanges, Fittings, Valves, and
Parts for High Temperature Service
ASTM A 994-2005 钢、不锈钢及相关合金产品规范的编辑程序和格式的标准指南
Standard Guide for Editorial Procedures and
Form of Product Specifications for Steel, Stainless
Steel, and Related Alloys
ASTM A 999/A 999Ma-2004 合金钢及不锈钢管一般要求的标准规范 Standard
Specification for General Requirements for Alloy
and Stainless Steel Pipe
ASTM B 254-1992 不锈钢的制备及电镀的标准规程 Standard Practice
for Preparation of and Electroplating on Stainless
Steel
ASTM B 37-2003 钢铁制造用铝的标准规范 Standard Specification
for Aluminum for Use in Iron and Steel Manufacture
ASTM B 633-1998 钢铁表面的电沉积锌覆层标准规范 Standard Specification
for Electrodeposited Coatings of Zinc on Iron
and Steel
ASTM B 694-2003 电缆护套用铜、铜合金、包铜青铜和包铜不锈钢薄板和带材标准规范
Standard Specification for Copper, Copper-Alloy,
Copper-Clad Bronze (CCB), Copper-Clad Stainless
Steel (CCS), and Copper-Clad Alloy Steel (CAS)
Sheet and Strip for Electrical Cable Shielding
ASTM B 695-2004 钢铁表面的锌机械沉积镀层标准规范 Standard Specification
for Coatings of Zinc Mechanically Deposited
on Iron and Steel
ASTM B 699-1986 钢铁表面镉真空沉积镀层标准规范 Standard Specification
for Coatings of Cadmium Vacuum-Deposited on
Iron and Steel
ASTM B 849-2002 钢铁预处理减小氢脆变危险的标准规范 Standard Specification
for Pre-Treatments of Iron or Steel for Reducing
Risk of Hydrogen Embrittlement
ASTM B 853-2002 粉末冶金(P/M)硼不锈钢构件的标准规范 Standard
Specification for Powder Metallurgy (P/M) Boron
Stainless Steel Structural Components
ASTM B 883-2005 金属注模(MIM)钢铁材料的标准规范 Standard
Specification for Metal Injection Molding (MIM)
Ferrous Materials
ASTM B 895-2005 通过浸入氯化钠溶液评价粉末冶金(P/M)不锈钢零件/样品的耐腐蚀性的标准试验方法
Test Methods for Evaluating the Corrosion Resistance
of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens
by Immersion in a Sodium Chloride Solution
ASTM B 912-2002 用电抛光法测定不锈钢钝化的标准规范 Standard Specification
for Passivation of Stainless Steels Using Electropolishing
ASTM C 795-2003 与奥氏体不锈钢接触用绝热材料标准规范 Standard
Specification for Thermal Insulation for Use
in Contact with Austenitic Stainless Steel
ASTM C 929-1994 奥氏体不锈钢上用绝热材料的加工、运输、海运、贮藏、验收和应用的标准实施规程
Standard Practice for Handling, Transporting,
Shipping, Storage, Receiving, and Application
of Thermal Insulation Materials For Use in Contact
with Austenitic Stainless Steel
ASTM E 1010-1984 再溶化法作光谱化学分析用钢铁圆盘试样的制备的标准实施规程
Standard Practice for Preparation of Disk Specimens
of Steel and Iron for Spectrochemical Analysis
by Remelting
ASTM E 1086-1994 用点对面激发技术作不锈钢的光辐射真空光谱测定分析 Standard
Test Method for Optical Emission Vacuum Spectrometric
Analysis of Stainless Steel by the Point-to-Plane
Excitation Technique
ASTM E 1806-1996 化合物测定钢铁标准样品的标准操作 Standard Practice
for Sampling Steel and Iron for Determination
of Chemical Composition
ASTM E 353-1993 不锈钢、耐热钢、马氏体钢和其它类似的铬镍铁合金化学分析的标准试验方法
Standard Test Methods for Chemical Analysis
of Stainless, Heat-Resisting, Maraging, and
Other Similar Chromium-Nickel-Iron Alloys
ASTM E 426-1998 无缝焊接管形产品、奥氏体不锈钢的类似合金的电磁(涡电流)检验
Standard Practice for Electromagnetic (Eddy-Current)
Examination of Seamless and Welded Tubular Products,
Austenitic Stainless Steel and Similar Alloys
ASTM E 572a-2002 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法
Standard Test Method for Analysis of Stainless
and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM F 1314-2001 外科植入用锻制氮增强的22铬13镍5锰2.5钼不锈钢合金棒和钢丝(UNS
S20910)标准规范 Standard Specification for Wrought
Nitrogen Strengthened 22 Chromium - 13 Nickel
- 5 Manganese - 2.5 Molybdenum Stainless Steel
Alloy Bar and Wire for Surgical Implants (UNS
S20910)
ASTM F 1325-1991 不锈钢缝合用针托.一般技术要求和通信试验方法 Stainless
Steel Suture Needle Holders-General Workmanship
Requirements and Corresponding Test Methods
ASTM F 1350-2001 锻造18铬-14镍-2.5钼不锈钢外科固定用线标准规范
Standard Specification for Wrought 18 Chromium-14
Nickel-2.5 Molybdenum Stainless Steel Surgical
Fixation Wire (UNS S31673)
ASTM F 138-2003 外科植入物用锻造18铬-14镍-2.5钼不锈钢棒及钢丝的标准规范(UNS
S31673) Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless
Steel Bar and Wire for Surgical Implants (UNS
S31673)
ASTM F 139-2003 外科植入物用锻造18铬-14镍-2.5钼不锈钢薄板及带材的标准规范(UNS
S31673) Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless
Steel Sheet and Strip for Surgical Implants
(UNS S31673)
ASTM F 1586-2002 外科植入物用锻制氮加强的21铬10镍3锰2.5钼不锈钢棒(UNS
S31675)标准规范 Standard Specification for Wrought
Nitrogen Strengthened 21 Chromium - 10 Nickel
- 3 Manganese - 2.5 Molybdenum Stainless Steel
Bar for Surgical Implants (UNS S31675)
ASTM F 1744-1996 不锈钢外科器械保养与维护标准导则 Standard Guide
for Care and Handling of Stainless Steel Surgical
Instruments
ASTM F 2098-2004 保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的标准规范
Standard Specification for Stainless Steel Clamps
for Securing SDR9 Cross-linked Polyethylene
(PEX) Tubing to Metal Insert Fittings
ASTM F 2181a-2002 外科植入物用锻造的无缝不锈钢管的标准规范 Standard
Specification for Wrought Seamless Stainless
Steel Tubing for Surgical Implants
ASTM F 2229-2002 外科植入物用氮加强的23锰21铬1钼低镍不锈钢锻造合金棒材和线材的标准规范
Standard Specification for Wrought, Nitrogen
Strengthened 23Manganese-21Chromium-1Molybdenum
Low-Nickel Stainless Steel Alloy Bar and Wire
for Surgical Implants (UNS S29108)
ASTM F 2257-2003 外科植入物用锻造无缝或焊接和拉拔18铬-14镍-2.5钼不锈钢小直径管的标准规范(UNS
S31673) Standard Specification for Wrought Seamless
or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum
Stainless Steel Small Diameter Tubing for Surgical
Implants (UNS S31673)
ASTM F 2281-2004 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范
Standard Specification for Stainless Steel and
Nickel Alloy Bolts, Hex Cap Screws, and Studs,
for Heat Resistance and High Temperature Applications
ASTM F 593-2002 不锈钢螺栓,六角头螺钉及螺柱标准规范 Standard
Specification for Stainless Steel Bolts, Hex
Cap Screws, and Studs
ASTM F 594-2002 不锈钢螺母标准规范 Standard Specification
for Stainless Steel Nuts
ASTM F 621-1997 外科植入用不锈钢锻件的标准规范 Standard Specification
for Stainless Steel Forgings for Surgical Implants
ASTM F 738M-2002 不锈钢米制螺栓、螺钉及螺柱(米制)的标准规范 Standard
Specification for Stainless Steel Metric Bolts,
Screws, and Studs
ASTM F 745-2000 铸造和固溶退火外科植入物用18铬12.5镍2.5钼不锈钢的标准规范
Standard Specification for 18 Chromium-12.5
Nickel-2.5 Molybdenum Stainless Steel for Cast
and Solution-Annealed Surgical Implant Applications
ASTM F 836M-2002 1型不锈钢米制螺母标准规范 Standard Specification
for Style 1 Stainless Steel Metric Nuts
ASTM F 837Ma-2002 不锈钢凹头螺钉螺丝的标准规范(米制) Standard
Specification for Stainless Steel Socket Head
Cap Screws [Metric]
ASTM F 837a-2002 不锈钢凹头螺钉螺丝的标准规范 Standard Specification
for Stainless Steel Socket Head Cap Screws
ASTM F 879Ma-2002 不锈钢圆头及扁平沉头六角螺钉的标准规范(米制) Standard
Specification for Stainless Steel Socket Button
and Flat Countersunk Head Cap Screws [Metric]
ASTM F 879a-2002 不锈钢圆头及扁平沉头六角螺钉的标准规范 Standard
Specification for Stainless Steel Socket Button
and Flat Countersunk Head Cap Screws
ASTM F 880-2002 不锈钢凹头定位螺钉标准规范 Standard Specification
for Stainless Steel Socket-Set Screws
ASTM F 880M-2002 不锈钢凹头定位螺钉(米制)标准规范 Standard
Specification for Stainless Steel Socket Set
Screws [Metric]
ASTM F 899-1995 外科器械用的不锈钢锭,棒材和丝材 Standard Specification
for Stainless Steel Billet, Bar, and Wire for
Surgical Instruments
ASTM G 108-1994 检测AISI304和304L型不锈钢增感作用的电化学再活化性(EPR)的测试方法
Standard Test Method for Electrochemical Reactivation
(EPR) for Detecting Sensitization of AISI Type
304 and 304L Stainless Steels
ASTM G 123-2000 沸腾酸化氯化钠溶液中不同镍合量不锈钢合金应力腐蚀裂纹评定的标准试验方法
Standard Test Method for Evaluating Stress-Corrosion
Cracking of Stainless Alloys with Different
Nickel Content in Boiling Acidified Sodium Chloride
Solution
ASTM G 35-1998 不锈钢及有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性测定的标准实施规程
Standard Practice for Determining the Susceptibility
of Stainless Steels and Related Nickel-Chromium-Iron
Alloys to Stress-Corrosion Cracking in Polythionic
Acids
ASTM G 48-2003 用氯化铁溶液测定不锈钢及有关合金耐点腐蚀和缝隙腐蚀的标准试验方法
Standard Test Methods for Pitting and Crevice
Corrosion Resistance of Stainless Steels and
Related Alloys by Use of Ferric Chloride Solution
UL 6A-2000 硬金属导管.铝、青铜和不锈钢 (Rigid metal conduit
- Aluminium, bronze and stainless steel )
英国钢铁标准(BS steel standards)
--------------------------------------------------------------------------------
BIP 3045-2006 不锈钢和交付条件.BS EN 10088不锈钢标准CD-ROM
Stainless steels and delivery conditions - BS
EN 10088 Stainless steel standards CD-ROM
BS 1429-1980 通用工程弹簧用退火圆钢丝规范 Specification for
annealed round steel wire for general engineering
springs
BS 1823-1973 医院手术示范室与病房用不锈钢空心器皿的规范 Specification
for stainless steel hollow-ware for use in hospital
operating-theatres and wards
BS 3056-8-1987 耐火砖尺寸.第8部分:钢铁水包用砖规范 Sizes of
refractory bricks - Specification for bricks
for ladles
BS 4147-1980 钢铁防护用沥青基热覆层材料(包括相应的底漆)规范 Specification
for bitumen-based hot-applied coating materials
for protecting iron and steel, including suitable
primers where required
BS 4164-2002 钢铁防护用煤柏油基热覆材料(包括相应的底漆)规范 Specification
for coal-tar-based hot-applied coating materials
for protecting iron and steel, including a suitable
primer
BS 4515-2-1999 陆地和近海铺设的钢管焊接规范.双联法不锈钢管道 Specification
for welding of steel pipelines on land and offshore
- Duplex stainless steel pipelines
BS 4677-1984 输送液体用奥氏体不锈钢管件的电弧焊规范 Specification
for arc welding of austenitic stainless steel
pipework for carrying fluids
BS 4825-1-1992 食品工业及其他卫生设施用不锈钢管及接头.第1部分:管规范
Stainless steel tubes and fittings for the food
industry and other hygienic applications - Specification
for tubes
BS 4825-2-1992 食品工业及其他卫生设施用不锈钢管及接头.第2部分:弯头和三通规范
Stainless steel tubes and fittings for the food
industry and other hygienic applications - Specification
for bends and tees
BS 4825-3-1992 食品工业及其他卫生设施用不锈钢管及配件.夹紧型连接件规范
Stainless steel tubes and fittings for the food
industry and other hygienic applications - Specification
for clamp type couplings
BS 4825-4-1992 食品工业及其他卫生设施用不锈钢管及接头.第4部分:螺纹(IDF型)管接头规范
Stainless steel tubes and fittings for the food
industry and other hygienic applications - Specification
for threaded (IDF type) coupling
BS 4825-5-1992 食品工业及其他卫生设施用不锈钢管及接头.第5部分:凹环形连接管接头规范
Stainless steel tubes and fittings for the food
industry and other hygienic applications - Specification
for recessed ring joint type couplings
BS 4880-1-1973 小便池规范.第1部分:不锈钢小便池 Specification
for urinals - Stainless steel slab urinals
BS 5194-1-1991 外科器械.第1部分:不锈钢规范 Surgical instruments.
Specification for stainless steel
BS 5245-1975 不锈钢软钎焊连接用磷酸基焊剂 Specification for
phosphoric acid based flux for soft soldered
joints in stainless steel
BS 5482-1-2005 家用丁烷-丙烷燃气装置的操作规范.永久性住宅、居住区公园和商业化处所中的钢管尺寸不超过DN25和波纹不锈钢
Code of practice for domestic butane- and propane-gas-burning
installations - Installations at permanent dwellings,
residential park homes and commercial presmises,
with installation pipework sizes not exceeding
DN 25 for steel and DN 28 for corrugated stainless
steel or copper
BS 5950-5-1998 建筑物钢铁架结构应用.冷成型薄式量规剖面设计实用规程. Structural
use of steelwork in building - Code of practice
for design of cold formed thin gauge sections
BS 6200-6.1-1990 钢、铁和其他黑色金属抽样与分析.第6部分:火焰吸收光谱测定法导则.第1节:
钢铁火焰原子吸收光谱法化学分析 Sampling and analysis of iron,
steel and other ferrous metals - Guidelines
on atomic absorption spectrometric techniques
- Recommendations for the drafting of standard
methods for the chemical analysis of iron and
steel by flame atomic absorption spectrometry
BS 6200-6.2-1990 钢、铁和其他黑色金属的抽样与分析法.第6部分:原子吸收光谱测定法导则.第2节:用火焰原子吸收光谱法对钢铁进
Sampling and analysis of iron, steel and other
ferrous metals - Guidelines on atomic absorption
spectrometric techniques - Recommendations for
the application of flame atomic absorption spectrometry
in standard methods for the chemical analysis
of iron and steel
BS 6318-2-1982 斗式升降机.第2部分:标定圆钢连接链垂直斗式升降机尺寸规范
Bucket elevators - Specification for dimensions
of vertical bucket elevators with calibrated
round steel link chains
BS 6362-1990 按BS21 "带压密接合螺纹接头的管及配件管螺纹"
攻丝的不锈钢管规范 Specification for stainless steel
tubes suitable for screwing in accordance with
BS 21 'Pipe threads for tubes and fittings where
pressure-tight joints are made on the threads'
BS 6521-1984 校准圆钢链节起重链正常使用和维修指南 Guide for proper
use and maintenance of calibrated round steel
link lifting chains
BS 6593-1985 绞合纺织物和钢铁加强传送带的现场非机械连接实用规程 Code
of practice for on-site non-mechanical jointing
of plied textile and steel reinforced conveyor
belting
BS 6744-2001 用于混凝土的加筋用不锈钢棒.要求和试验方法 Stainless
steel bars for the reinforcement of and use
in concrete - Requirements and test methods
BS 7252-1-1997 外科植入物用金属材料.可锻不锈钢规范 Metallic materials
for surgical implants - Specification for wrought
stainless steel
BS 7252-9-1993 外科植物入用金属材料.第9部分:高氮不锈钢规范 Metallic
materials for surgical implants - Specification
for high-nitrogen stainless steel
BS 7838-1996 直径达到28 mm的低压气体管道系统用的波纹状不锈钢半硬式管材和有关配件规范
Specification for corrugated stainless steel
semi-rigid pipe and associated fittings for
low-pressure gas pipework of up to 28 mm
BS DD ENV 1090-6-2001 钢结构的施工.不锈钢的补充规则 Execution
of steel structures - Supplementary rules for
stainless steel
BS EN 10021-1993 钢铁制品的一般交货技术条件 General technical
delivery requirements for steel and iron products
BS EN 10028-7-2000 承受压力用的平钢板制品规范.不锈钢 Flat products
made of steels for pressure purposes - Stainless
steels
BS EN 10036-1991 黑色金属材料的化学分析.钢铁中碳总含量的测定.在氧气流中燃烧后的重力测定法
Chemical analysis of ferrous materials - Determination
of total carbon in steels and irons - Gravimetric
method after combustion in a stream of oxygen
BS EN 10060-2003 一般用途热轧圆钢棒.尺寸及形状和尺寸公差 Hot rolled
round steel bars for general purposes - Dimensions
and tolerances on shape and dimensions
BS EN 10071-1991 黑色金属材料的化学分析.钢铁中锰含量的测定.电势滴定法
Chemical analysis of ferrous materials - Determination
of manganese in steels and irons - Electrometric
titration method
BS EN 10088-1-2005 不锈钢.不锈钢的清单 Stainless steels
- List of stainless steels
BS EN 10088-2-2005 不锈钢.一般用途耐腐蚀钢薄板/板材和带材的交货技术条件
Stainless steels - Technical delivery conditions
for sheet/plate and strip of corrosion resisting
steels for general purposes
BS EN 10088-3-2005 不锈钢.通用耐腐蚀钢制半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件
Stainless steels - Technical delivery conditions
for semi-finished products, bars, rods, wire,
sections and bright products of corrosion resisting
steels for general purposes
BS EN 10108-2004 冷锻和冷挤压圆钢棒.尺寸和公差 Round steel
rod for cold heading and cold extrusion - Dimensions
and tolerances
BS EN 1011-3-2000 焊接.金属材料焊接的推荐规范.不锈钢的电弧焊接 Welding
- Recommendations for welding of metallic materials
- Arc welding of stainless steels
BS EN 10136-1991 黑色金属材料的化学分析.钢铁中镍含量的测定.火焰原子吸收光谱测定法
Chemical analysis of ferrous materials - Determination
of nickel in steels and irons - Flame atomic
absorption spectrometric method
BS EN 10151-2002 弹簧用不锈钢带材.交货技术条件 Stainless steel
strip for springs - Technical delivery conditions
BS EN 10211-1996 钢铁材料的化学分析.钢和铁中钛含量的测定.火焰原子吸收光谱法
Chemical analysis of ferrous materials - Determination
of titanium in steel and iron - Flame atomic
absorption spectrometric method
BS EN 10217-7-2005 压力用途焊接钢管.交货技术条件.不锈钢管 Welded
steel tubes for pressure purposes - Technical
delivery conditions - Stainless steel tubes
BS EN 10222-5-2000 压力容器用钢锻件.马口铁钢,奥氏体钢,奥氏体-铁素体不锈钢
Steel forgings for pressure purposes - Martensitic,
austenitic and austenitic-ferritic stainless
steels
BS EN 10228-4-1999 钢锻件无损检验.奥氏体和奥氏体-铁素体不锈钢锻件超声检验
Non-destructive testing of steel forgings -
Ultrasonic testing of austenitic and austenitic-ferritic
stainless steel forgings
BS EN 10250-4-2000 一般工程用敞口钢模锻件.不锈钢 Open steel
die forgings for general engineering purposes
- Stainless steels
BS EN 10263-5-2001 冷加工和冷挤压钢棒、棍和线.不锈钢交付技术条件 Steel
rod, bars and wire for cold heading and cold
extrusion - Technical delivery conditions for
stainless steels
BS EN 10264-4-2002 钢丝和钢丝产品.绳索用钢丝.不锈钢丝 Steel
wire and wire products - Steel wire for ropes
- Stainless steel wire
BS EN 10270-3-2001 机械弹簧钢丝.不锈钢弹簧钢丝 Steel wire
for mechanical springs - Stainless spring steel
wire
BS EN 10272-2000 压力装置用不锈钢棒材 Stainless steel
bars for pressure purposes
BS EN 10276-1-2000 铁素体材料的化学分析.钢铁中氧含量测定.氧测定用钢样品的抽样和制备
Chemical analysis of ferrous materials - Determination
of oxygen in steel and iron - Sampling and preparation
of steel samples for oxygen determination
BS EN 10276-2-2003 钢铁材料的化学分析.钢和铁中氧的含量测定.在惰性气体中熔解后红外法
Chemical analysis of ferrous materials - Determination
of oxygen in steel and iron - Infrared method
after fusion under inert gas
BS EN 10296-1-2003 机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Non-alloy and alloy steel tubes
BS EN 10307-2002 无损检验.厚度大于或等于6mm的奥氏体铁素体不锈钢体钢扁平轧材的超声波检测(反射检测法)
Non-destructive testing - Ultrasonic testing
of austenitic and austentitic-ferritic stainless
steels flat products of thickness equal to or
greater than 6 mm (reflection method)
BS EN 10312-2003 包括人生活用水在内的水成液输送用焊接不锈钢管.交货技术条件
Welded stainless steel tubes for the conveyance
of aqueous liquids inclu ding water for human
consumption - Technical delivery conditions
BS EN 1124-1-1999 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.要求、测试和质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 1: Requirements,
testing, quality control
BS EN 1124-2-1999 废水系统用插接式纵向焊接不锈钢管道和配件.系统5.尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - System S. Dimensions
BS EN 1124-3-1999 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.系统X、尺寸
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - System X; dimensions
BS EN 12072-2000 焊接消耗品.不锈钢和耐热钢电弧焊用金属线电极,金属线和杆.分级
Welding consumables - Wire electrodes, wires
and rods for arc welding of stainless and heat-resisting
steels - Classification
BS EN 12330-2000 金属腐蚀防护.钢铁的镉电解镀层 Corrosion protection
of metals - Electrodeposited coatings of cadmium
on iron or steel
BS EN 12502-4-2005 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.不锈钢的影响因素
Protection of metallic materials against corrosion
- Guidance on the assessment of corrosion likelihood
in water distribution and storage systems -
Influencing factors for stainless steels
BS EN 13025-2-2005 包装.轻型金属容器.20000ml、25000ml和30000ml标称容量不可移动盖(活盖)圆钢和马口铁容器
Packaging — Light gauge metal containers — Part
2: Non-removable head (tight head) round steel
and tinplate containers with a nominal capacity
of 20000 ml, 25000 ml and 30000 ml
BS EN 13025-3-2005 包装.轻型金属容器.20000ml、25000ml和30000ml标称容量可移动盖(活盖)圆钢和马口铁容器
Packaging — Light gauge metal containers — Part
3: Removable head (open head) round steel and
tinplate containers with a nominal capacity
of 20000 ml, 25000 ml and 30000 ml
BS EN 13322-2-2003 可运输的气瓶.可再充填的焊接钢瓶.设计和制造.不锈钢
Transportable gas cylinders - Refillable welded
steel gas cylinders - Design and construction
- Stainless steel
BS EN 13828-2003 建筑物用阀.建筑物内饮用水供给用手动铜合金及不锈钢球阀.试验及要求
Building valves - Manually operated copper alloy
and stainless steel ball valves for potable
water supply in buildings - Tests and requirements
BS EN 14222-2003 不锈钢火管锅炉 Stainless steel shell
boilers
BS EN 14330-2004 内河航行船舶.无档锚链.圆钢链 Inland navigation
vessels - Studless anchor chain - Round steel
link chain
BS EN 14638-1-2006 可运输的气瓶.容量不超过150升的可再充气焊接容器.焊接奥氏体的试验方法证明设计的不锈钢气瓶
Transportable gas cylinders - Refillable welded
receptacles of a capacity not exceeding 150
litres - Welded austenitic stainless steel cylinders
made to a design justified by experimental methods
BS EN 1600-1997 焊接用料.不锈钢和耐热钢手工金属弧焊用的涂覆电极.分类
Welding consumables - Covered electrodes for
manual metal arc welding of stainless and heat
resisting steels - Classification
BS EN 1964-3-2000 移动式储气瓶.水容量由0.5升到150升(包括150升)的可再充气的移动式无缝钢制储气瓶的设计和建造规范.Rm值低
Transportable gas cylinders - Specification
for the design and construction of refillable
transportable seamless steel gas cylinders of
water capacities from 0,5 litre up to and including
150 litres - Cylinders made of seamless stainless
steel with an Rm value of less than 1 100 MPa
BS EN 24937-1991 钢铁.铬含量测定.电势或目视滴定法 Steel and
iron - Determination of chromium content - Potentiometric
or visual titration method
BS EN 3145-2002 热轧圆钢棒.标准公差.直径6mm D 250mm.尺寸
Round bars, hot rolled in steel - Normal tolerances
- Diameter 6 mm D 250 mm - Dimensions
BS EN 502-2000 金属屋面板.不锈钢制全支撑产品规范 Roofing products
from metal sheet - Specification for fully supported
products of stainless steel sheet
BS EN 508-1-2000 金属制屋面产品.钢,铝和不锈钢薄板材自撑式产品规范.钢
Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Steel
BS EN 508-2-2000 金属制屋面产品.钢,铝和不锈钢薄板材自撑式产品规范.铝
Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Aluminium
BS EN 508-3-2000 金属制屋面产品.钢,铝和不锈钢薄板材自撑式产品规范.不锈钢
Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Stainless steel
BS EN 60404-4-1997 磁性材料.钢铁直流磁性能的测量方法 Magnetic
materials - Methods of measurement of d.c. magnetic
properties of iron and steel
BS EN 61249-7-1-1996 互连接装置用材料.第7部分:芯约束用材料分规范.第1节:铜/殷钢/铜
Materials for interconnection structures - Sectional
specification set for restraining core materials
- Copper/invar/copper
BS EN ISO 1127-1997 不锈钢管.尺寸、公差和单位长度的常规质量 Stainless
steel tubes - Dimensions, tolerances and conventional
masses per unit length
BS EN ISO 14284-2002 钢铁.测定化学成分用的样品的取样和制备 Steel
and iron - Sampling and preparation of samples
for the determination of chemical composition
BS EN ISO 1461-1999 加工钢铁制品的热浸镀锌层.规格和试验方法 Hot
dip galvanized coatings on fabricated iron and
steel articles - Specifications and test methods
BS EN ISO 16048-2003 耐腐蚀不锈钢紧固件的钝化 Passivation
of corrosion-resistant stainless-steel fasteners
BS EN ISO 2338-1998 未淬硬钢和奥氏体不锈钢制的平行销 Parallel
pins of unhardened steel and austenitic stainless
steel
BS EN ISO 3506-1-1998 耐腐蚀不锈钢紧固件的机械特性.螺栓、螺钉和螺柱
Mechanical properties of corrosion-resistant
stainless-steel fasteners - Bolts, screws and
studs
BS EN ISO 3506-2-1998 耐腐蚀不锈钢紧固件的机械特性.螺母 Mechanical
properties of corrosion-resistant stainless-steel
fasteners - Nuts
BS EN ISO 3506-3-1998 耐腐蚀不锈钢紧固件的机械特性.不受拉伸应力作用的定位螺丝和同类紧固件
Mechanical properties of corrosion-resistant
stainless-steel fasteners - Set screws and similar
fasteners not under tensile stress
BS EN ISO 3506-4-2003 耐腐蚀不锈钢紧固件的机械特性.攻丝螺钉 Mechanical
properties of corrosion-resistant stainless-steel
fasteners - Tapping screws
BS EN ISO 3651-1-1998 不锈钢耐晶间腐蚀的测定.奥氏体和铁素体－奥氏体(二相)不锈钢.测定不锈钢在硝酸介质中质量损失的腐蚀试验
( Determination of resistance to intergranular
corrosion of stainless steels - Austenitic and
ferritic-austenitic (duplex) stainless steels
- Corrosion test in nitric acid medium by measurement
of loss in mass (Huey test)
BS EN ISO 3651-2-1998 不锈钢耐晶间腐蚀的测定.第2部分:铁素体、奥氏体、铁素体－奥氏体(二相)不锈钢.含有硫酸的介质中的腐蚀试验
Determination of resistance to intergranular
corrosion of stainless steels - Ferritic, austenitic
and ferritic-austenitic (duplex) stainless steels
- Corrosion test in media containing sulfuric
acid
BS EN ISO 7046-2-1995 H型或Z型十字槽沉头螺钉.A级产品.8.8级,不锈钢和非铁类金属钢特性
Countersunk flat head screws (common head style)
with type H or type Z cross recess - Product
grade A. Steel of property class 8.8, stainless
steel and non-ferrous metals
BS EN ISO 7153-1-1991 外科器械.金属材料.不锈钢 Surgical
instruments - Metallic materials - Stainless
steel
BS EN ISO 8249-2000 焊接.奥氏体和双重铁氧体奥氏体镍不锈钢焊接金属中铁素体数的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals
BS EN ISO 8442-2-1998 与食品密切接触的材料和物品.餐具和桌餐盘.不锈钢和镀银餐具的要求
Materials and articles in contact with foodstuffs
- Cutlery and table holloware - Requirements
for stainless steel and silver-plated cutlery
BS EN ISO 8733-1998 未淬硬钢或奥氏体不锈钢的带内螺纹的平行销 Parallel
pins with internal thread, of unhardened steel
or austenitic stainless steel
BS EN ISO 8734-1998 淬硬钢或马氏体不锈钢制平行销(定位销) Parallel
pins, of hardened steel or martensitic stainless
steel (Dowel pins)
BS EN ISO 8735-1998 淬硬钢和马氏体不锈钢制带内螺纹的平行销 Parallel
pins with internal thread, of hardened steel
or martensitic stainless steel
BS EN ISO 9626-1991 医疗器具制造用的不锈钢针管 Stainless
steel needle tubing for the manufacture of medical
devices
BS ISO 15350-2001 钢铁.碳和硫总含量的测定.感应炉燃烧后的红外线吸收法(常规法)
Steel and iron - Determination of total carbon
and sulfur content - Infrared absorption method
after combustion in an induction furnace (routine
method)
BS ISO 15730-2001 金属和其他无机涂层.采用电解抛光精加工和钝化不锈钢
Metallic and other inorganic coatings - Electropolishing
as a means of smoothing and passivating stainless
steel
BS ISO 17058-2004 钢铁.砷含量的测定.分光光度法 Steel and
iron - Determination of arsenic content - Spectrophotometric
method
DD ENV 1090-6-2001 钢结构施工.不锈钢的补充规则 Execution
of steel structures. Supplementary rules for
stainless steel
欧洲钢铁标准(EN steel standards)
--------------------------------------------------------------------------------
EN 10021-1993 钢铁制品 一般交货技术条件 General technical
delivery requirements for steel and iron products
EN 10028-7-2000 压力用途的钢板制品 第7部分：不锈钢管 Flat products
made of steels for pressure purposes - Part
7: Stainless steels
EN 10036-1989 黑色金属材料的化学分析 钢铁中的总碳含量的测定 在氧气中燃烧后的重量分析法
Chemical analysis of ferrous materials; determination
of total carbon in steels and irons; gravimetric
method after combustion in a stream of oxygen
EN 10071-1989 黑色金属材料的化学分析 钢铁中的锰含量的测定 电势滴定法 Chemical
analysis of ferrous materials; determination
of manganese in steels and irons; electrometric
titration method
EN 10088-1-1995 不锈钢 第1部分：不锈钢目录 Stainless steels
- Part 1: List of stainless steels
EN 10088-2-1995 不锈钢 第2部分：一般用及结构用薄板/板材和带材的交货技术条件
Stainless steels - Part 2: Technical delivery
conditions for sheet/plate and strip for general
purposes
EN 10088-3-1995 不锈钢 第3部分：一般用途的半成品、钢棒、线材和型钢的交货技术条件
Stainless steels - Part 3: Technical delivery
conditions for semi-finished products, bars,
rods and sections for general purposes
EN 1011-3-2000 焊接 金属材料焊接的推荐规范 第3部分：不锈钢的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 3: Arc welding of stainless
steels
EN 10136-1989 黑色金属材料的化学分析 钢铁中的镍含量的测定 火焰原子吸收光谱测定法
Chemical analysis of ferrous materials; determination
of nickel in steels and irons; flame atomic
absorption spectrometric method
EN 10151-2002 弹簧用不锈钢钢带 交货技术条件 Stainless steel
strip for springs - Technical delivery conditions
EN 10177-1989 黑色金属材料的化学分析 钢铁中钙的测定 火焰原子吸收光谱法
Chemical analysis of ferrous materials; determination
of calcium in steels; flame atomic absorption
spectrometric method
EN 10184-1989 黑色金属材料化学分析 钢铁中磷的测定 分光光度法 Chemical
analysis of ferrous materials; determination
of phosphorus in steels and irons; spectrophotometric
method
EN 10188-1989 黑色金属材料的化学分析 钢铁中铬的测定 火焰原子吸收光谱法
Chemical analysis of ferrous materials; determination
of chromium in steels and irons; flame atomic
absorption spectrometric method
EN 10211-1995 黑色金属材料的化学分析 钢铁中钛含量测定 火焰原子吸收光谱测定法
Chemical analysis of ferrous materials - Determination
of titanium in steel and iron - Flame atomic
absorption spectrometric method
EN 10212-1995 黑色金属材料的化学分析 钢铁中砷含量的测定 分光光度法 Chemical
analysis of ferrous materials - Determination
of arsenic in steel and iron - Spectrophotometric
method
EN 10222-5-1999+AC-2000 压力用途的钢锻件 第5部分：马氏体、奥氏体、奥氏体-铁素体不锈钢
Steel forgings for pressure purposes - Part
5: Martensitic, austenitic and austenitic-ferritic
stainless steels
EN 10228-4-1999 钢锻件的无损检测 第4部分：奥氏体和奥氏体-铁素体不锈钢锻件的超声检验
Non-destructive testing of steel forgings -
Part 4: Ultrasonic testing of austenitic and
austenitic-ferritic stainless steel forgings
EN 10250-4-1999 一般工程用途的敞口钢模锻件 第4部分：不锈钢 Open
die steel forgings for general engineering purposes
- Part 4: Stainless steels
EN 10258-1997 冷轧不锈钢窄带材和切割长度 尺寸和形状公差 Cold-rolled
stainless steel narrow strip and cut lengths
- Tolerances on dimensions and shape
EN 10259-1997 冷轧不锈钢宽带材和金属板/薄板 尺寸和形状公差 Cold-rolled
stainless steel wide strip and plate/sheet -
Tolerances on dimensions and shape
EN 10263-5-2001 冷加工和冷挤压的钢棒、棒材和线材 第5部分：不锈钢交货的一般技术条件
Steel rod, bars and wire for cold heading and
cold extrusion - Part 5: Technical delivery
conditions for stainless steels
EN 10264-4-2002 钢丝和钢丝制品 绳用钢丝 第4部分：不锈钢钢丝 Steel
wire and wire products - Steel wire for ropes
- Part 4: Stainless steel wire
EN 10268-1998 冷成形用高屈服强度微合金钢的冷轧扁钢材 交货一般条件 Cold-rolled
flat products made of high yield strength micro-alloyed
steels for cold forming - General delivery conditions
EN 10271-1998 电镀锌镍的扁钢材 交货技术条件 Electrolytically
zinc-nickel (ZN) coated steel flat products
- Technical delivery conditions
EN 10272-2000 压力用途的不锈钢棒材 Stainless steel bars
for pressure purposes
EN 10276-1-2000 钢铁材料的化学分析 钢和铁中氧的测定 第1部分：氧含量测定中钢试样的取样和制备
Chemical analysis of ferrous materials - Determination
of oxygen in steel and iron - Part 1: Sampling
and preparation of steel samples for oxygen
determination
EN 10276-2-2003 钢铁材料的化学分析 钢和铁中氧的测定 第2部分：在惰性气体条件下熔融后用红外光谱法测定
Chemical analysis of ferrous materials - Determination
of oxygen content in steel and iron - Part 2:
Infrared method after fusion under inert gas
EN 10277-1-1999 光亮型钢材 交货技术条件 第1部分：总则 Bright
steel products - Technical delivery conditions
- Part 1: General
EN 10277-2-1999 光亮型钢材 交货技术条件 第2部分：一般工程用途钢 Bright
steel products - Technical delivery conditions
- Part 2: Steels for general engineering purposes
EN 10277-3-1999 光亮型钢材 交货技术条件 第3部分：无切削钢 Bright
steel products - Technical delivery conditions
- Part 3: Free-cutting steels
EN 10277-4-1999 光亮型钢材 交货技术条件 第4部分：表面硬化钢 Bright
steel products - Technical delivery conditions
- Part 4: Case-hardening steels
EN 10277-5-1999 光亮型钢材 交货技术条件 第5部分：淬火和回火钢 Bright
steel products - Technical delivery conditions
- Part 5: Steels for quenching and tempering
EN 10278-1999 光亮型钢材的尺寸和公差 Dimensions and tolerances
of bright steel products
EN 10306-2001 钢铁 带平行法兰的H钢梁和IPE钢梁的超声波检验 Iron
and steel - Ultrasonic testing of H beams with
parallel flanges and IPE beams
EN 10307-2001 无损检测 厚度等于或大于6mm的奥氏体和奥氏体铁素不锈钢板材的超声波检验（反射式探伤法）
Non-destructive testing - Ultrasonic testing
of austenitic and austenitic-ferritic stainless
steels flat products of thickness equal to or
greater than 6 mm (reflection method)
EN 10312-2002 传送人类消耗的含水液体（包括水）的焊焊接不锈钢管 交货技术条件
Welded stainless steel tubes for the conveyance
of aqueous liquids including water for human
consumption - Technical delivery conditions
EN 1124-1-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分：要求、测试、质量控制
Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 1: Requirements,
testing, quality control
EN 1124-1/prA1-2002 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件
第1部分：要求、测试、质量控制 修改A1 Pipes and fittings of longitudinally
welded stainless steel pipes with spigot and
socket for waste water systems - Part 1: Requirements,
testing, quality control; Amendment A1
EN 1124-2-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道和配件 第2部分：系统S
尺寸 Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 2: System S -
Dimensions
EN 1124-3-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第3部分：系统X
尺寸 Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems - Part 3: System X -
Dimensions
EN 12072-1999 焊接易耗品 不锈钢和耐热钢电弧焊用丝状焊条、金属丝和棒 分级
Welding consumables - Wire electrodes, wires
and rods for arc welding of stainless and heat-resisting
steels - Classification
EN 12073-1999 焊接易耗品 不锈钢和耐热钢有或无气体遮蔽金属电弧焊接用管状有芯焊条 分级
Welding consumables - Tubular cored electrodes
for metal arc welding with or without a gas
shield of stainless and heat-resisting steels
- Classification
EN 12501-2-2003 金属材料的防腐 泥土中可能出现的腐蚀 第２部分：低合金和非合金的钢铁材料
Protection of metallic materials against corrosion
- Corrosion likelihood in soil - Part 2: Low
alloyed and non alloyed ferrous materials
EN 13322-2-2003 可移动气瓶 再充式焊接不锈钢气瓶 设计与结构 第2部分：不锈钢
Transportable gas cylinders - Refillable welded
steel gas cylinders; Design and construction
- Part 2: Stainless steel
EN 13828-2003 建筑物阀门 建筑物中饮用水供水用手动铜合金及不锈钢球阀 试验和要求
Building valves - Manually operated copper alloy
and stainless steel ball valves for potable
water supply in buildings - Test and requirements
EN 14222-2003 不锈钢火管锅炉 Stainless steel shell
boilers
EN 1503-1-2000 阀门 阀体、阀帽和阀套用材料 第1部分：欧洲标准中规定的钢材
Valves - Materials for bodies, bonnets and covers
- Part 1: Steels specified in European Standards
EN 1503-2-2000 阀门 阀体、阀帽和阀套用材料 第2部分：非欧洲标准规定的钢材
Valves - Materials for bodies, bonnets and covers
- Part 2: Steels other than those specified
in European Standards
EN 253-2003 分区供暖管 直接掩埋热水网用预隔热连接的管道系统 成套钢铁管道设备的管组件、聚氨酯热绝缘和聚乙烯外覆
District heating pipes - Preinsulated bonded
pipe systems for directly buried hot water networks
- Pipe assembly of steel service pipe, polyurethane
thermal insulation and outer casing of polyethylene
EN 2596-1988 航空航天系列 镀镉不锈钢制径向锯齿锁紧垫圈 尺寸 Aerospace
series - Washers, lock, with radial serrations,
in corrosion resisting steel, cadmium plated
- Dimensions
EN 2596-1988+AC1-1988 航空航天系列 镀镉不锈钢径向锯齿形花键锁紧垫圈 尺寸
Aerospace series; Washers, lock, with radial
serrations, in corrosion resisting steel, cadmium
plated; Dimensions
EN 448-2003 热水分配管道 地下热水网用预隔热包覆层的管道系统 聚氨酯热绝缘和聚乙烯外覆层的钢铁管的配件
District heating pipes - Preinsulated bonded
pipe systems for directly buried hot water networks
- Fitting assemblies of steel service pipes,
polyurethane thermal insulation and outer casing
of polyethylene
EN 488-2003 热水分配管道 地下热水网用预先绝热包覆的管道系统 成套钢铁管道设备的管阀门组件、聚氨酯热绝缘和聚乙
District heating pipes - Preinsulated bonded
pipe systems for directly buried hot water networks
- Steel valve assembly for steel service pipes,
polyurethane thermal insulation and outer casing
of polyethylene
EN 489-2003 热水分配管道 地下热水网用预隔热包覆的管道系统 成套钢铁管道设备的接头组件、聚氨酯热绝缘和聚乙烯外
District heating pipes - Preinsulated bonded
pipe systems for directly buried hot water networks
- Joint assembly for steel service pipes, polyurethane
thermal insulation and outer casing of polyethylene
EN 502-1999 金属薄板材制成的屋顶产品 不锈钢薄板材全支撑屋顶产品规范 Roofing
products from metal sheet - Specification for
fully supported roofing products of stainless
steel sheet
EN 508-1-2000 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范
第1部分：钢 Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 1: Steel
EN 508-2-2000 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范
第2部分：铝 Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 2: Aluminium
EN 508-3-2000 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范
第3部分：不锈钢 Roofing products from metal sheet -
Specification for self-supporting products of
steel, aluminium or stainless steel sheet -
Part 3: Stainless steel
EN ISO 11124-1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分：一般介绍及分类
Preparation of steel substrates before application
of paints and related products - Specifications
for metallic blast-cleaning abrasives - Part
1: General introduction and classification (ISO
11124-1:1993)
EN ISO 11124-2-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁丸
Preparation of steel substrates before application
of paints and related products - Specifications
for metallic blast-cleaning abrasives - Part
2: Chilled-iron grit (ISO 11124-2:1993)
EN ISO 11124-3-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第3部分：高碳铸钢丸和砂
Preparation of steel substrates before application
of paints and related products - Specifications
for metallic blast-cleaning abrasives - Part
3: High-carbon cast-steel shot and grit (ISO
11124-3:1993)
EN ISO 11124-4-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分：低碳铸钢丸
Preparation of steel substrates before application
of paints and related products - Specifications
for metallic blast-cleaning abrasives - Part
4: Low-carbon cast-steel shot (ISO 11124-4:1993)
EN ISO 11125-1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第1部分：抽样
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
1: Sampling (ISO 11125-1:1993)
EN ISO 11125-2-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第2部分：颗粒尺寸分布的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
2: Determination of particle size distribution
(ISO 11125-2:1993)
EN ISO 11125-3-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第3部分：硬度测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
3: Determination of hardness (ISO 11125-3:1993)
EN ISO 11125-4-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第4部分：表观密度测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
4: Determination of apparent density (ISO 11125-4:1993)
EN ISO 11125-5-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第5部分：缺陷颗粒的百分比和微结构的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
5: Determination of percentage defective particles
and of microstructure (ISO 11125-5:1993)
EN ISO 11125-6-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第6部分：外来杂质测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
6: Determination of foreign matter (ISO 11125-6:1993)
EN ISO 11125-7-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第7部分：含水量测定
Preparation of steel substrates before application
of paints and related products - Test methods
for metallic blast-cleaning abrasives - Part
7: Determination of moisture (ISO 11125-7:1993)
EN ISO 11126-1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第1部分：总体介绍和分类(包括技术勘误1
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 1: General introduction and classification
(ISO 11126-1:1993, including Technical Corrigenda
1:1997 and 2:
EN ISO 11126-3-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第3部分：铜精炼渣
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 3: Copper refinery slag (ISO 11126-3:1993)
EN ISO 11126-4-1998 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第4部分：煤炉渣
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 4: Coal furnace slag (ISO 11126-4:1993)
EN ISO 11126-5-1998 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第5部分：镍精炼渣
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 5: Nickel refinery slag (ISO 11126-5:1993)
EN ISO 11126-6-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第6部分：炼铁炉渣
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 6: Iron furnace slag (ISO 11126-6:1993)
EN ISO 11126-7-1999 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第7部分：熔融氧化铝
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 7: Fused aluminium oxide (ISO 11126-7:1995)
EN ISO 11126-8-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第8部分：橄榄石砂
Preparation of steel substrates before application
of paints and related products - Specifications
for non-metallic blast-cleaning abrasives -
Part 8: Olivine sand (ISO 11126-8:1993)
EN ISO 11127-1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第1部分：抽样
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 1: Sampling (ISO 11127-1:1993)
EN ISO 11127-2-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第2部分：颗粒尺寸分布的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 2: Determination of particle size distribution
(ISO 11127-2:1993)
EN ISO 11127-3-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第3部分：表观密度测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 3: Determination of apparent density (ISO
11127-3:1993)
EN ISO 11127-4-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第4部分：通过玻璃载片试验评定硬度
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 4: Assessment of hardness by a glass slide
test (ISO 11127-4:1993)
EN ISO 11127-5-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第5部分：含水量测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 5: Determination of moisture (ISO 11127-5:1993)
EN ISO 11127-6-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第6部分：通过测量电导率测定水溶性杂质
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 6: Determination of water-soluble contaminants
by conductivity measurement (ISO 11127-6:1993)
EN ISO 11127-7-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第7部分：水溶性氯化物的测定
Preparation of steel substrates before application
of paints and related products - Test methods
for non-metallic blast-cleaning abrasives -
Part 7: Determination of water soluble chlorides
(ISO 11127-7:1993)
EN ISO 1127-1996 不锈钢管 尺寸、公差和单位长度的公称质量 Stainless
steel tubes - Dimensions, tolerances and conventional
masses per unit length
EN ISO 1461-1999 钢铁制件的热浸锌层 规范和试验方法 Hot dip galvanized
coatings on fabricated iron and steel articles
- Specifications and test methods (ISO 1461:1999)
EN ISO 16048-2003 耐蚀不锈钢紧固件的钝化 Passivation of
corrosion-resistant stainless steel fasteners
(ISO 16048:2003)
EN ISO 2338-1997 不淬硬钢和奥氏体不锈钢圆锥销 Parallel pins,
of unhardened steel and austenitic stainless
steel (ISO 2338:1997)
EN ISO 3506-1-1997 耐腐蚀不锈钢紧固件的机械性能 第1部分：螺栓、螺钉和螺柱
Mechanical properties of corrosion-resistant
stainless-steel fasteners - Part 1: Bolts, screws
and studs (ISO 3506-1:1997)
EN ISO 3506-2-1997 耐腐蚀不锈钢紧固件的机械性能 第2部分：螺母 Mechanical
properties of corrosion-resistant stainless-steel
fasteners - Part 2: Nuts (ISO 3506-2:1997)
EN ISO 3506-3-1997 耐腐蚀不锈钢紧固件的机械性能 第3部分：紧定螺钉及类似的不受应力的螺纹紧固件
Mechanical properties of corrosion-resistant
stainless-steel fasteners - Part 3: Set screws
and similar fasteners not under tensile stress
(ISO 3506-3:1997)
EN ISO 3506-4-2003 耐腐蚀不锈钢紧固件的机械性能 第4部分：自攻螺钉
Mechanical properties of corrosion-resistant
stainless-steel fasteners - Part 4: Tapping
screws (ISO 3506-4:2003)
EN ISO 3651-1-1998 不锈钢耐晶间腐蚀的测定 第1部分：奥氏体和铁素奥氏体(二重)不锈钢 用失重测定法在硝酸介质中的腐蚀试验(
Determination of resistance to intergranular
corrosion of stainless steels - Part 1: Austenitic
and ferritic-austenitic (duplex) stainless steels
- Corrosion test in nitric acid medium by measurement
of loss in mass (Huey test) (ISO 3651-1:1998)
EN ISO 3651-2-1998 不锈钢耐晶间腐蚀的测定 第2部分：奥氏体、奥氏体和铁素奥氏体(二重)不锈钢 在硫酸介质中的腐蚀试验
Determination of resistance to intergranular
corrosion of stainless steels - Part 2: Ferritic,
austenitic and ferritic-austenitic (duplex)
stainless steels - Corrosion test in media containing
sulfuric acid (ISO 3651-2:1998)
EN ISO 3823-1-1998 牙科旋转器械 牙钻 第1部分：不锈钢牙钻和硬质合金牙钻
Dental rotary instruments - Burs - Part 1: Steel
and carbide burs (ISO 3823:1997)
EN ISO 7046-2-1994 十字槽沉头(通用头型)螺钉 产品等级A级 第2部分：性能等级 钢8.8级、不锈钢和有色金属
Cross recessed countersunk flat head screws
(common head style) - Grade A - Part 2: Steel
of property class 8.8, stainless steel and non-ferrous
metals (ISO 7046-2:1990)
EN ISO 7153-1-2000 外科器械 金属材料 第1部分：不锈钢 Surgical
instruments - Metallic materials - Part 1: Stainless
steel (ISO 7153-1:1991, including Amendment
1:1999)
EN ISO 8249-2000 焊接 奥氏体和成双铁素体奥氏体镍－铬不锈钢焊接金属中铁素体数(FN)的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals (ISO 8249:2000)
EN ISO 8442-2-1997 与食品接触的材料和制品 刀具与凹形餐具 第2部分：不锈钢及镀银刀具的要求
Materials and articles in contact with foodstuffs
- Cutlery and table holloware - Part 2: Requirements
for stainless steel and silver-plated cutlery
(ISO 8442-2:1997)
EN ISO 8501-1 Supplement-2001 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分的补充信息：用不同磨料喷砂处理时钢表面
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Informative supplement
to Part 1: Representative photographic examples
of the change of appearance imparted to steel
when blast
EN ISO 8501-1-2001 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分：未涂装的钢材和全面清除原有涂层后钢材
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Part 1: Rust grades
and preparation grades of uncoated steel substrates
and of steel substrates after overall removal
of previo
EN ISO 8501-2-2001 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分：局部清除原有涂层后钢材的锈蚀等级
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Part 2: Preparation
grades of previously coated steel substrates
after localized removal of previous coatings
(ISO 8501-2:1994)
EN ISO 8502-2-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第2部分：清理过的表面上的氯化物的实验室测定
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 2:
Laboratory determination of chloride on cleaned
surfaces (ISO 8502-2:1992)
EN ISO 8502-3-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分：油漆前预处理后的钢材表面上的灰尘评定
Preparation of steel substrates before application
of paint and related products - Tests for the
assessment of surface cleanliness - Part 3:
Assessment of dust on steel surfaces prepared
for painting (pressure-sensitive tape method)
(ISO 8502-3:1992)
EN ISO 8502-4-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分：油覆前凝露可能性的评定导则
Preparation of steel substrates before application
of paint and related products - Tests for the
assessment of surface cleanliness - Part 4:
Guidance on the estimation of the probability
of condensation prior to paint application (ISO
8502-4:1993)
EN ISO 8502-6-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第6部分：分析用可溶性杂质的提取
Bresle法 Preparation of steel substrates before
application of paints and related products -
Tests for the assessment of surface cleanliness
- Part 6: Extraction of soluble contaminants
for analysis - The Bresle method (ISO 8502-6:1995)
EN ISO 8502-9-2000 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导测定法
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 9:
Field method for the conductometric determination
of water-soluble salts (ISO 8502-9:1998)
EN ISO 8503-1-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分：磨料喷射清理表面粗糙度的ISO评
Preparation of steel substrates before application
of paints and related products - Surface roughness
characteristics of blast-cleaned steel substrates
- Part 1: Specifications and definitions for
ISO surface profile comparators for the assessment
of abr
EN ISO 8503-2-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分：磨料喷射清理表面粗糙度的定级
Preparation of steel substrates before application
of paints and related products - Surface roughness
characteristics of blast-cleaned steel substrates
- Part 2: Method for the grading of surface
profile of abrasive blast-cleaned steel - Comparator
proce
EN ISO 8503-3-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分：ISO表面轮廓比较仪的校准方法和
Preparation of steel substrates before application
of paints and related products - Surface roughness
characteristics of blast-cleaned steel substrates
- Part 3: Method for the calibration of ISO
surface profile comparators and for the determination
of s
EN ISO 8503-4-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分：ISO表面轮廓比较仪的校准方法和
Preparation of steel substrates before application
of paints and related products - Surface roughness
characteristics of blast-cleaned steel substrates
- Part 4: Method for the calibration of ISO
surface profile comparators and for the determination
of s
EN ISO 8504-1-2001 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分：总则
Preparation of steel substrates before application
of paints and related products - Surface preparation
methods - Part 1: General principles (ISO 8504-1:2000)
EN ISO 8504-2-2001 涂装油漆和有关产品前钢材预处理 表面预处理方法 第2部分：磨料喷射清理
Preparation of steel substrates before application
of paints and related products - Surface preparation
methods - Part 2: Abrasive blast-cleaning (ISO
8504-2:2000)
EN ISO 8504-3-2001 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分：手工和动力工具清洗
Preparation of steel substrates before application
of paints and related products - Surface preparation
methods - Part 3: Hand- and power-tool cleaning
(ISO 8504-3:1993)
EN ISO 8733-1997 不淬硬钢或奥氏体不锈钢内螺纹圆柱销 Parallel
pins with internal thread, of unhardened steel
or austenitic stainless steel (ISO 8733:1997)
EN ISO 8734-1997 淬硬钢和马氏体不锈钢(定位销)圆柱销 Parallel
pins, of hardened steel or martensitic stainless
steel (Dowel pins) (ISO 8734:1997)
EN ISO 8735-1997 淬硬钢或马氏体不锈钢内螺纹圆柱销 Parallel pins
with internal thread, of hardened steel or martensitic
stainless steel (ISO 8735:1997)
ENV 10080-1995 混凝土加固用钢材 为适于焊接而加筋的混凝土钢B500 棒、
环盘 已焊过的钢筋网的交货技术条件 Steel for the reinforcement
of concrete - Weldable ribbed reinforcing steel
B 500 - Technical delivery conditions for bars,
coils and welded fabric / Note: Withdrawn by
mistake
ENV 1090-6-2000 钢结构制作 第6部分：不锈钢的补充规则 Execution
of steel structures - Part 6: Supplementary
rules for stainless steel
ENV 1993-1-4-1996 欧洲法典3：钢结构设计 第1-4部分：一般规则 关于不锈钢的补充规则
Eurocode 3: Design of steel structures - Part
1-4: General rules - Supplementary rules for
stainless steels
ENV ISO 8502-1-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第1部分：可溶性铁锈现场试验
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 1:
Field test for soluble iron corrosion products
(ISO/TR 8502-1:1991)
FZ 92065-2006 不锈钢焊接式烘筒 Stainless steel welding
cylinder
prEN 10060-2003 热轧圆钢棒 形状和尺寸的公差和尺寸 Hot rolled
round steel bars for general purposes - Dimensions
and tolerances on shape and dimensions
prEN 10080-1-1999 钢筋混凝土用钢材 可焊钢筋 第1部分：一般要求 Steel
for the reinforcement of concrete - Weldable
reinforcing steel - Part 1: General requirements
prEN 10080-2-1999 钢筋混凝土用钢材 可焊钢筋 第2部分：A类交货技术条件
Steel for the reinforcement of concrete - Weldable
reinforcing steel - Part 2: Technical delivery
conditions for class A
prEN 10080-3-1999 钢筋混凝土用钢材 可焊钢筋 第3部分：B类交货技术条件
Steel for the reinforcement of concrete - Weldable
reinforcing steel - Part 3: Technical delivery
conditions for class B
prEN 10080-4-1999 钢筋混凝土用钢材 可焊钢筋 第4部分：C类交货技术条件
Steel for the reinforcement of concrete - Weldable
reinforcing steel - Part 4: Technical delivery
conditions for class C
prEN 10080-5-1999 钢筋混凝土用钢材 可焊钢筋 第5部分：焊接钢筋网交货技术条件
Steel for the reinforcement of concrete - Weldable
reinforcing steel - Part 5: Technical delivery
conditions for welded fabric
prEN 10080-6-1999 钢筋混凝土用钢材 可焊钢筋 第6部分：结构梁交货技术条件
Steel for the reinforcement of concrete - Weldable
reinforcing steel - Part 6: Technical delivery
conditions for lattice girders
prEN 10088-1-2001 不锈钢 第1部分：不锈钢目录 Stainless steels
- Part 1: List of stainless steels
prEN 10088-2-2001 不锈钢 第2部分：一般用及结构用薄板/板材和带材的交货技术条件
Stainless steels - Part 2: Technical delivery
conditions for sheet/plate and strip of corrosion
resisting steels for general and construction
purposes
prEN 10088-3-2001 不锈钢 第3部分：一般用及结构用耐腐蚀钢的半成品、钢棒、线材型钢和光亮产品的交货技术条件
Stainless steels - Part 3: Technical delivery
conditions for semi-finished products, bars,
rods, wire, sections and bright products of
corrosion resisting steels for general and construction
purposes
prEN 10108-2000 冷成型螺母和螺栓用圆钢棒 尺寸和公差 Round steel
rod for cold formed nuts and bolts - Dimensions
and tolerances
prEN 10138-1-2000 预应力钢材 第1部分：一般要求 Prestressing
steels - Part 1: General requirements
prEN 10138-2-2000 预应力钢材 第2部分：线材 Prestressing
steels - Part 2: Wire
prEN 10138-3-2000 预应力钢材 第3部分：钢绞线 Prestressing
steels - Part 3: Strand
prEN 10138-4-2000 预应力钢材 第4部分：棒材 Prestressing
steels - Part 4: Bars
prEN 10138-5-1991 预应力钢材 第5部分：淬火和回火线材 Prestressing
steels; part 5: quenched and tempered wire
prEN 10201-1988 黑色金属材料的化学分析 钢铁中硅的测定 火焰原子吸收光谱法
Chemical analysis of ferrous materials; determination
of silicon in steel and iron; flame atomic absoption
spectrometric method
prEN 10216-5-1998 压力用途的无缝钢管 交货技术条件 第5部分：不锈钢管
Seamless steel tubes for pressure purposes -
Technical delivery conditions - Part 5: Stainless
steel tubes
prEN 10217-7-1998 压力用途的焊接钢管 交货技术条件 第7部分：不锈钢管
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 7: Stainless steel
tubes
prEN 10222-6-1994 压力用途的钢锻件 第6部分：奥氏体、马氏体和奥氏体-铁素体不锈钢
Steel forgings for pressure purposes - Part
6: Austenitic, martensitic and austenitic-ferritic
stainless steels
prEN 10296-2-2001 机械和一般工程用途的焊接钢管 交货技术条件 第2部分：不锈钢管
Welded circular steel tubes for mechanical and
general engineering purposes - Technical delivery
conditions - Part 2: Stainless steel tubes
prEN 10297-2-2001 机械和一般工程用途的无缝环行钢管 交货技术条件 第2部分：不锈钢管
Seamless circular steel tubes for mechanical
and general engineering purposes - Technical
delivery conditions - Part 2: Stainless steel
tubes
prEN 12502-3-2001 金属材料的防腐 输水系统中的可能出现的腐蚀 第３部分：热浸镀锌钢铁材料影响因素的评价
Protection of metallic materials against corrosion
- Corrosion likelihood in water - Part 3: Review
of the influencing factors for hot dip galvanised
ferrous materials
prEN 12502-4-2001 金属材料的防腐 输水系统中的可能出现的腐蚀 第４部分：不锈钢影响因素的评价
Protection of metallic materials against corrosion
- Corrosion likelihood in water conveying systems
- Part 4: Review of the influencing factors
for stainless steels
prEN 14330-2003 内河船 无横档锚链 圆钢环链 Inland navigation
vessels - Studless anchor chain - Round steel
link chain
prEN 2596-2002 航空航天系列 镀镉不锈钢径向锯齿形花键飞行器操纵杆锁紧垫圈 尺寸
Aerospace series - Washers, lock with radial
serrations in corrosion resisting steel, cadmium
plated - Dimensions
prEN 6110-2000 航空航天系列 不锈钢100 平头盲螺栓 Aerospace
series - Bolts, blind, 100?flush head, stainless
steel
prEN ISO 10806-2003 管道工程 皱纹软金属管用非合金及不锈钢配件 Pipework
- Fittings for corrugated metallic hoses (ISO/FDIS
10806:2003)
法国钢铁标准(NF steel standards)
--------------------------------------------------------------------------------
NF A03-117-1983 钢铁产品的质量检验 (Quality control
surveillance of steel products.)
NF A03-157-1978 钢铁产品.钢材的弯曲试验 (IRON AND STEEL.
BEND TEST ON STEEL.)
NF A03-157-1978 钢铁产品.钢材的弯曲试验 (IRON AND STEEL.
BEND TEST ON STEEL.)
NF A03-158-1978 钢铁产品.厚度等于或大于0.5mm和小于0.3mm的钢板与钢带的单向弯曲试验
(IRON AND STEEL. SIMPLE BEND TEST ON STEEL SHEET
AND STRIP UNDER 3 MM THICK (FROM AND INCLUDING
0,5 MM UP TO BUT EXCLUDING 3 MM).)
NF A03-172-1980 钢铁产品.钢的硬度换算值 (Iron and steel.
Conversion values of steel hardness.)
NF A03-355-1985 钢铁产品.蠕变试验 (Steel products. Creep
test.)
NF A03-400-1983 钢铁产品.疲劳试验.一般原则.` (Iron and steel.
General principles of the fatigue test.)
NF A03-401-1983 钢铁产品.轴向载荷疲劳试验 (Iron and steel.
Fatigue test by axial loading.)
NF A03-402-1983 钢铁产品.回转弯曲疲劳试验 (Iron and steel.
Fatigue test by rotary flexion.)
NF A03-509-1983 钢铁产品.疲劳试验机的校准 (Iron and steel.
Calibration of fatigue test machines.)
NF A03-657-1987 钢铁产品.挤压试验时,钢冷变形性能的检验 (Iron and
steel products. Steel cold ductility determination.
Compression test.)
NF A03-658-2001 钢铁.钢薄板和板材塑性应变比值γ的测定方法 (Iron
and steel - Methode of determination of the
plastic strain ration r of steel sheet and plate.)
NF A03-659-2001 钢铁.钢薄板和板材拉伸应力硬化指数n的测定方法 (Iron
and steel - Method of determination of the tensile
strain hardening exponent n of steel sheet and
plate.)
NF A03-702-1962 钢铁产品.线材试验.铁丝和钢丝的锡涂层试验 (IRON
AND STEEL PRODUCTS. TESTING OF TIN COATINGS
ON IRON AND STEEL THREAD.)
NF A03-707-1973 钢铁产品.线材试验.线材的简单扭转试验 (SIMPLE
TORSION TESTING OF STEEL WIRES.)
NF A04-105-1986 钢铁产品.锻钢中非金属杂质含量的测定方法. 第1部分:宏观法
(Iron and steel. Methods of determination of
the non metallic inclusion content of wrought
steels. Part 1 : macroscopic methods.)
NF A04-106-1984 钢铁产品.锻钢中非金属杂质含量的测定方法.第2部分:标准图象显微照像法
(Iron and steel. Methods of determination of
content of non metallic inclusions in wrought
steel. Part II : micrographic method using standards
diagrams.)
NF A04-107-1980 钢铁产品.测定非合金钢线材中非金属杂质含量的显微照相方法
(IRON AND STEEL. MICROGRAPHIC METHOD OF DETERMINATION
OF THE NON METALLIC INCLUSION CONTENT OF UNALLOYED
WIRE ROD.)
NF A04-110-1984 钢铁产品.一般用于三次挤压或拉伸的非合金钢线材.表面检查
(Iron and steel. Wire rods of non-alloy general
purpose steel for wire drawing. Surface examination.)
NF A04-111-1980 钢铁产品.高碳钢线材脱碳深度的显微照相法测定 (IRON
AND STEEL. MICROGRAPHIC DETERMINATION OF THE
EXTENT OF DECARBURISATION OF NON ALLOY HIGH
CARBON STEEL WIRE ROD.)
NF A04-112-1980 钢铁产品.沸腾钢线材化学杂质成分的描述及使其显示的显微照相法
(IRON AND STEEL. MACROGRAPHIC METHOD OF SHOWING
AND DESCRIBING THE CHEMICAL HETEROGENEITY OF
EFFERVESCENT STEEL WIRE ROD.)
NF A04-113-1984 钢铁产品.由钢锭加工的高碳钢线材.化学杂质成分的描述及使其显示的的宏观检查法
(Iron and steel. High carbon steel wire rod
derived from ingots. Macrographic method of
showing and describing the chemical heterogeneity.)
NF A04-114-1984 钢铁产品.由连续浇注产品加工的高碳连续铸锭钢线材的描述及使其显示的客观检查法化学杂质成分法
(IRON AND STEEL. HIGH CARBON CONTINUOUS CAST
STEEL WIRE ROD. MACROGRAPHIC METHOD OF SHOWING
AND DESCRIBING THE CHEMICAL HETEROGENEITY.)
NF A04-201-1984 钢铁产品.用非合金结构钢和特殊结构钢热处理.脱碳深度的测定
(Steel products. Special purpose unalloy and
alloy structural steels for heat traitement.
Determination of depth of decarburization.)
NF A04-203-1984 钢铁产品.表面加热淬火常规深度的测定 (Steel products.
Determination of the effective depth of hardening
after flame or induction hardening.)
NF A04-204-1985 钢铁产品.表面淬火薄层的整个厚度或常规厚度的测定 (Steel
products. Determination of the total or conventional
thickness of surface hardened thin layers.)
NF A04-302-1984 钢铁产品.用断裂法对奥氏体晶粒放大倾向和对工具钢淬火深度的测定(谢佛特氏试验)
(Iron and steel. Determination using fracture
test pieces of the austenitic grain growth tendency
and of the hardness depth in tool steels (shepherd
test).)
NF A04-303-1979 钢铁产品.物理试验.Jominy(叁密氏)淬火试验 (IRON
AND STEEL. PHYSICAL TESTS. JOMINY HARDENABILITY
TEST.)
NF A04-305-1983 钢铁产品.厚度大于或等于６mm的钢板的超声反射检验.质量的定义.试验方法
(IRON AND STEEL. ULTRASONIC REFLECTION TESTING
OF SHEET WITH THICKNESS NOT LESS THAN 6 MM.
DEFINITION OF QUALITY. TEST METHODS.)
NF A04-306-2002 钢铁.带平行法兰和IPE梁的H梁的超声检验 (Iron
and steel - Ultrasonic testing of H beams with
parallel flanges and IPE beams.)
NF A04-312-2002 无损检验.对厚度等于或大于6mm的奥氏体和奥氏体铁素体不锈钢扁钢产品的超声波检验(反射法)
(Non-destructive testing - Ultrasonic testing
of austenitic and austenitic-ferritic stainless
steels flat products of thickness equal to or
greater than 6 mm (reflection method).)
NF A04-315-3-1998 钢材锻造的非损试验.第3部分:铁素体钢和马氏体钢锻造的超声波试验
(Non-destructive testing of steel forgings.
Part 3 : ultrasonic testing of ferritic or martensitic
steel forgings.)
NF A04-315-4-1999 钢锻件的无损检验.第4部分:奥氏体和奥氏体铁素体不锈钢锻件的超声波检验
(Non-destructive testing of steel forgings.
Part 4 : ultrasonic testing of austenitic and
austenitic-ferritic stainless steel forgings.)
NF A05-151-1984 钢铁产品.用硫印法进行宏观照相检查(鲍法) (Steel
products. Macrographic examination by sulfur
print (Baumann method).)
NF A05-152-1984 钢铁产品.用强无机酸进行宏观检查 (Steel products.
Macroscopic examination by etching with strong
mineral acids.)
NF A05-153-1984 钢铁产品.用铜盐侵蚀法进行宏观检查 (Iron and
steel. Macroscopic examination by means of copper
salt etching.)
NF A05-154-1985 钢铁产品.金属覆膜技术.(光学检验) (Steel products.
Metallographic replica techniques. (optical
examination).)
NF A05-159-1998 不锈钢耐晶间腐蚀的测定.第2部分:铁素体、奥氏体和铁素体奥氏体(二重)不锈钢.含有硫酸的介质中的腐蚀试验
(Determination of resistance to intergranular
corrosion of stainless steels. Part 2 : ferritic,
austenitic and ferritic-austenitic (duplex)
stainless steels. Corrosion test in media containing
sulfuric acid.)
NF A05-160-1998 不锈钢耐晶间腐蚀的测定.第1部分:奥氏体和铁素体奥氏体(二重)不锈钢.测定不锈钢在硝酸介质中质量损失的腐蚀
(Determination of resistance to intergranular
corrosion of stainless steels. Part 1 : austenitic
and ferritic-austenitic (duplex) stainless steels.
Corrosion test in nitric acid medium by measurement
of loss in mass (Huey test).)
NF A05-305-1981 奥氏体不锈钢和镍铬铁奥氏体合金.在四连多硫酸钠中约束晶间腐蚀试验
(AUSTENITIC STAINLESS STEELS AND NI - CR - FE
AUSTENITIC STAINLESS ALLOYS. INTERGRAIN CORROSION
UNDER STRESS TEST IN SODIUM TETRATHIONATE.)
NF A06-373-1989 冶金材料的化学分析.钢材中含氮量的测定.分光光度法 (Chemical
analysis of ferrous materials. Determination
of nitrogen (trace amounts) in steels. Spectrophotometric
method.)
NF A06-390-2002 钢铁.磷含量的测定.磷钒钼酸盐分光光度法 (Steel
and iron - Determination of phosphorus content
- Phosphovanadomolybdate spectrophotometric
method.)
NF A06-391-2001 钢铁.含碳总量的测定.感应炉燃烧红外线吸收法 (Steel
and iron - Determination of total carbon content
- Infrared absorption method after combustion
in an induction furnace.)
NF A06-392-2-2003 黑色金属的化学分析.钢铁中的氧含量测定.第2部分:在惰性气体中融化后的红外法
(Chemical analysis of ferrous materials - Determination
of oxygen content in steel and iron - Part 2
: infrared method after fusion under inert gas.)
NF A08-328-1989 黑色金属材料的化学分析.钢铁中铬的测定.火焰原子吸收光谱测定法
(Chemical analysis of ferrous materials. Determination
of chromium in steels and irons. Flame atomic
absorption spectrometric method.)
NF A35-021-1998 混凝土用钢材.用于增强钢制备的可焊接金属线 (STEELS
FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION
OF REINFORCING STEELS.)
NF A35-024-1998 混凝土钢材.由直径小于5mm的金属线构成的织物 (Steels
for concrete. Fabric composed of wires with
a diameter lower than 5 mm.)
NF A35-052-1987 钢铁产品.带改进粘附性的焊接钢丝网和钢丝用非合金钢线材
(Iron and steel. Unalloyed steel wire rod for
welded fabric and wire with improved adherence.)
NF A35-053-1984 钢铁产品.热成型或低温成型制造产品用非合金钢线材.型号
(Iron and steel. Non-alloy steel wire rod for
products made by hot or cold forming. Types.)
NF A35-055-1984 钢铁产品.涂药焊条用非合金钢线材.等级和型号 (Iron
and steel. Wire rod in non-alloy steel for coated
electrodes. Grades and types.)
NF A35-056-1984 钢铁产品.气体保护电弧焊和潜弧焊的焊条用合金钢和非合金钢线材.等级和型号
(Iron and steel. Wire rod in non-alloy and alloy
steel for colled electrodes for gas shielded
are welding and submerged arc welding. Grades
and types.)
NF A35-057-1979 钢铁产品.冷成形高强度机械弹簧钢丝制造用非合金钢线材.型号
(IRON AND STEEL. WIRE RODS MADE OF UNALLOYED
STEEL FOR THE MANUFACTURE OF HIGH RESISTING
COLD-FORMED SPRING WIRES. TYPES.)
NF A35-564-5-2002 冷镦和冷挤压的钢杆材、棒材和线材.第5部分:不锈钢的交货技术条件
(Steel rod, bars and wire for cold heading and
cold extrusion - Part 5 : technical delivery
conditions for stainless steels.)
NF A35-565-1994 钢铁.轴承钢.类型 (IRON AND STEEL. BEARING
STEELS. TYPES.)
NF A35-566-1983 钢铁产品.链条钢.等级和型号 (Iron and steel
products. Chain steels. Grades and types.)
NF A35-572-1995 不锈钢.第1部分:不锈钢目录 (STAINLESS STEELS.
PART 1 : LIST OF STAINLESS STEELS. (EUROPEAN
STANDARD EN 10088-1).)
NF A35-574-1995 不锈钢.第3部分:一般用途的半成品,钢棒,轧制线材和型钢的交货技术条件
(Stainless steels. Part 3 : technical delivery
conditions for semi-finished products, bars,
rods, and sections for general purposes.)
NF A35-579-1998 内燃机合金和钢材 (Valve steels and alloys
for internal combustion engines.)
NF A35-587-2003 弹簧用不锈钢带材.交货技术条件 (Stainless steel
strip for springs - Technical delivery conditions.)
NF A35-590-1992 钢铁产品.工具钢 (IRON AND STEEL. TOOL
STEELS.)
NF A36-225-2000 压力容器用不锈钢棒 (Stainless steel bars
for pressure purposes.)
NF A36-331-1989 钢铁产品.不锈钢.连续镀铅的带材和板材 (IRON AND
STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED
SHEET AND STRIP.)
NF A36-331-1989 钢铁产品.不锈钢.连续镀铅的带材和板材 (IRON AND
STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED
SHEET AND STRIP.)
NF A36-607-1984 锅炉和压力容器用自由锻造或模锻法制奥氏体不锈钢零件.质量等级和类型
(AUSTENITIC STAINLESS STEEL PARTS OBTAINED BY
FLAT DIE FORGING OR DROP FORGING FOR BOILERS
AND PRESSURE VESSELS. GRADE AND TYPES.)
NF A36-613-1986 一般用锻件.不锈钢 (GENERAL PURPOSE FORGINGS.
STAINLESS STEELS.)
NF A36-711-2002 无包装钢.用于接触人和动物消耗的食品、产品和饮料的不锈钢
(Non packaging steel - Stainless steel intended
for use in contact with foodstuffs, products
and beverages for human and animal consumption.)
NF A37-604-4-2002 钢丝和钢丝产品.绳索用钢丝.第4部分:不锈钢钢丝 (Steel
wire and wire products - Steel wire for ropes
- Part 4 : stainless steel wire.)
NF A37-611-3-2001 机械弹簧用钢丝.第3部分:不锈钢弹簧钢丝 (Steel
wire for mechanical springs - Part 3 : stainless
spring steel wire.)
NF A45-006-1982 钢铁.热轧六角型钢材.尺寸 (Iron and steel.
Hot rolled hexagon steel. Dimensions.)
NF A45-006-1982 钢铁.热轧六角型钢材.尺寸 (Iron and steel.
Hot rolled hexagon steel. Dimensions.)
NF A45-110-1983 冶金产品.不锈钢和耐热钢线材和棒材.轧制公差 (Iron
and steel. Stainless and heat resisting steel
for bars and wires. Rolling tolerances.)
NF A46-110-1-1997 冷轧不锈钢窄带材和切削长度.尺寸与形状公差 (Cold-rolled
stainless steel narrow strip and cut lengths.
Tolerances on dimensions and shape.)
NF A46-110-2-1997 冷轧不锈钢宽带材和板材/薄板.尺寸和形状公差(欧洲标准EN
10259) (Cold-rolled stainless steel wide strip
and plate/sheet. Tolerances on dimensions and
shape.)
NF A47-301-1976 钢铁产品.弹簧用非铅浴淬火合金硬质钢制三股圆钢丝 (IRON
AND STEEL. ROUND SPRING STEEL WIRES. PATENTED
DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.)
NF A47-301-1976 钢铁产品.弹簧用非铅浴淬火合金硬质钢制三股圆钢丝 (IRON
AND STEEL. ROUND SPRING STEEL WIRES. PATENTED
DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.)
NF A47-402-1993 钢铁制品.低温成型不锈钢长制品的尺度,公差和表面质量 (IRON
AND STEEL PRODUCTS. COLD-FORMED STAINLESS STEEL
LONG PRODUCTS. DIMENSIONS, TOLERANCES AND SURFACE
QUALITY.)
NF A47-402-1993 钢铁制品.低温成型不锈钢长制品的尺度,公差和表面质量 (IRON
AND STEEL PRODUCTS. COLD-FORMED STAINLESS STEEL
LONG PRODUCTS. DIMENSIONS, TOLERANCES AND SURFACE
QUALITY.)
NF A49-117-1985 钢管.管道和其他用途光端无缝钢管.铁素体和奥氏体不锈钢.尺寸.交货技术条件
(Steel tubes. Seamless plain end tubes for pipes-lines
and other uses. Ferritic and austenitic stainless
steels. Dimensions. Technical delivery conditions.)
NF A49-147-1980 钢管.一般用和管道用光端纵向焊接钢管.奥氏体不锈钢.（尺寸.交货技术条件.）
(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED
TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC
STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY
CONDITIONS.)
NF A49-148-1980 钢管.一般用和管道用光端纵向焊接钢管.铁素体不锈钢.（尺寸.交货技术条件.）
(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED
TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC
STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY
CONDITIONS.)
NF A49-151-2003 包括饮用水在内的含水液体输送用焊接不锈钢管.交货技术件
(Welded stainless steel tubes for the conveyance
of aqueous liquids including water for human
consumption - Technical delivery conditions.)
NF A49-217-1987 钢管.热交换器用无缝管.奥氏体不锈钢和铁素体钢.（尺寸.交货技术条件.）
(Steel tubes. Seamless tubes for heat exchangers.
Stainless ferritic, austenic or ferritoaustenitic
steel grades. Dimensions. Technical delivery
conditions.)
NF A49-218-1979 钢管.奥氏体不锈钢熔炉用无缝钢管.（带标准公差或缩减公差的尺寸.交货技术条件.）
(STEEL PIPES. SEAMLESS PIPES FOR FURNACES. AUSTENITIC
STAINLESS STEELS. DIMENSIONS (WITH NORMAL OR
REDUCED TOLERANCES). TECHNICAL DELIVERY CONDITIONS.)
NF A49-244-1993 钢管.压力设备用焊接奥氏体不锈钢和奥氏铁素体轧制钢管的尺寸和技术交货条件
(STEEL TUBES. WELDED AUSTENITIC STAINLESS AND
AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE
SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR
DELIVERY.)
NF A49-247-1981 钢管.热交换器用纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件
(Steel tubes. Tubes welded longitudinally for
heat exchangers. Austenitic stainless steels.
Dimensions. Technical delivery conditions.)
NF A49-249-1980 钢管.食品工业用光端纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件
(Steel tubes. Longitudinally welded plain end
tubes for the food industry. Austenitic stainless
steels. Dimensions. Technical delivery conditions.)
NF A49-289-1990 钢管.用于高低温条件下的对缝焊接管状配件.非合金、合金和不锈钢.尺寸.技术交货条件
(Steel tubes. Butt welding tubular fittings
used at low and high temperature. Non alloy,
alloy and stainless steels. Dimensions. Technical
delivery conditions.)
NF A49-317-1980 钢管.机械用光端无缝钢管.奥式体不锈钢.（尺寸.交货技术条件.）
(STEEL TUBES. SEAMLESS PLAIN END TUBES FOR ENGINEERING
USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS.
TECHNICAL DELIVERY CONDITIONS.)
NF A49-647-1979 钢管.不锈钢、铁素体和奥氏体钢制圆形、正方形、矩形或椭圆形建筑用焊接钢管.（尺寸.交货技术条件.）
(STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR
OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS
STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF
DELIVERY.)
NF A49-950-1996 不锈钢管.尺寸、公差和单位长度的规范质量 (Stainless
steel tubes. Dimensions, tolerances and conventional
masses per unit length.)
NF A50-421-1994 锻铝和铝合金钢材,带材和板材.第2部分:机械性能 (Aluminium
and aluminium alloys. Sheet, strip and plate.
Part 2 : mechanical properties.)
NF A72-120-1973 钢铁厂.气体管道和大直径阀.带法兰的接头（PN6） (LARGE
DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS.
FLANGE CONNECTIONS PN 6.)
NF A81-318-1980 有不锈钢和/或耐热钢的出的粉末焊剂，电弧焊用实心金属裸焊丝.符号.规范
(SOLID BARE ELECTRODE WIRES FOR SUBMERGED ARC
WELDING,DEPOSITING A STAINLESS AND/OR HEAT-RESISTING
STEEL. SYMBOLIZATION. SPECIFICATIONS.)
NF A81-324-1981 实心金属裸双焊条.有不锈钢和/或耐热钢析出的电弧焊用粉末焊剂.符号.规范.试验
(COMBINATIONS OF BARE SOLID-METAL ELECTRODE
WIRES AND POWER FLUXES FOR ELECTRIC ARC WELDING,DEPOSITING
A STAINLESS AND/OR REFRACTORY STEEL. SYMBOLIZATION.
REQUIREMENTS. TEST.)
NF A89-101-3-2000 焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊
(Welding - Recommendations for welding of metallic
materials - Part 3 : arc welding of stainless
steels.)
NF A89-207-2000 焊接.在奥氏体和双重铁素体奥氏体铬镍不锈钢焊接金属中铁素体数目的测定
(Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals.)
NF C28-495-2002 继电器用磁性材料(钢铁) (Magnetic materials
(iron and steel) for use in relays.)
NF D29-011-2-1998 与食品料有关的材料和物质.餐具和凹型餐具.第2部分:不锈钢和镀银餐具的要求
(MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFF.
CUTLERY AND TABLE HOLLOWAR. PART 2 : REQUIREMENTS
FOR STAINLESS STEEL AND SILVER-PLATED CUTLERY.
(EUROPEAN STANDARD EN ISO 8442-2).)
NF D36-406-2004 建筑物用阀.建筑物内饮用水给水用手动铜合金和不锈钢球阀.试验和要求
(Building valves - Manually operated copper
alloy and stainless steel ball valves for potable
water supply in buildings - Tests and requirements.)
NF E25-035-1995 紧固件.不锈钢螺纹连接件.试验方法.使用合格证 (FASTENERS.
STAINLESS STEEL THREADED CONNECTIONS. TEST METHODS.
FITNESS FOR USE.)
NF E25-042-2003 耐腐蚀不锈钢紧固件的钝化 (Passivation of
corrosion-resistant stainless-steel fasteners.)
NF E25-100-5-1998 碳钢和不锈钢制紧固件的机械性能.第5部分:不处在拉伸应力下的固定螺钉和类似螺纹紧固件
(Mechanical properties of fasteners made of
carbon steel and alloy steel. Part 5 : set screws
and similar threaded fasteners not under tensile
stresses.)
NF E25-100-6-1998 不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓
(Mechanical properties of corrosion-resistant
stainless-steel fasteners. Part 1 : bolts, screws
and studs.)
NF E25-100-8-1998 不锈钢紧固件耐腐蚀的机械特性.不低于拉伸应力下配套螺钉和类似紧固件
(Mechanical properties of corrosion-resistant
stainless-steel fasteners. Part 3 : set screws
and similar fasteners not under tensile stress.)
NF E25-119-2-1994 十字槽沉头螺钉(一般头形).等级A.第2部分:8.8类特性钢,不锈钢和有色金属
(Cross recessed countersunk flat head scews
(common head style). Grade A. Part 2 : steel
of property class 8.8, stainless steel and non-ferrous
metals.)
NF E25-400-6-1998 不锈钢耐腐蚀机械特性.螺母 (Mechanical
properties of corrosion-resistant stainless-steel
fasteners. Part 2 : nuts.)
NF E25-651-2003 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 (Mechanical
properties of corrosion-resistant stainless
steel fasteners - Part 4 : tapping screws.)
NF E25-755-1997 非硬度钢和奥斯特不锈钢的内螺纹平行螺钉 (Parallel
pins with internal thread, of unhardened steel
and austenitic stainless steel.)
NF E25-756-1997 金属不锈钢和硬化钢的平行螺钉 (Parallel pins,
of hardened steel and martensitic stainless
steel (Dowel pins).)
NF E25-757-1997 非硬度钢和奥斯特不锈钢的内螺纹平行螺钉 (Parallel
pins with internal thread, of hardened steel
and martensitic stainless steel.)
NF E26-020-1975 未校准未试验过的焊接圆钢环链 (Welded link
chain round steel non calibrated non tested.)
NF E29-251-1972 工业管道.不锈钢制焊接冲压凸缘（薄型系列）.公称压力１０
(STAMPED STAINLESS-STEEL FILLETS FOR WELDING
(THIN SERIES) PN 10)
NF E29-736-2-2003 可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第2部分:不锈钢
(Transportable gas cylinders - Reffilable welded
steel gas cylinders - Design and construction
- Part 2 : stainless steel.)
NF E29-833-1979 管道.双咬边金属软管.(石棉垫片，密封，圆截面，奥氏体不锈钢制)
(PIPEWORKS. FLEXIBLE METAL HOSES DOUBLE INTERLOCK,ASBESTOS
PACKING,PRESSURE-TIGHT,CIRCULAR SECTION,IN AUSTENITIC
STAINLESS STEEL.)
NF E32-116-2003 不锈钢外壳的锅炉 (Stainless steel shell
boilers.)
NF F80-101-1988 铁路车辆.F ８０钢铁产品和半成品制造铁路车辆推荐使用的钢材.I?一般规定
(ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING
STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.)
NF F80-101-1988 铁路车辆.F ８０钢铁产品和半成品制造铁路车辆推荐使用的钢材.I?一般规定
(ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING
STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.)
NF F80-102-1988 铁路车辆.制造铁路车辆推荐使用的钢材.II.一般用结构钢
(ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING
STOCK CONSTRUCTION. II. STRUCTURAL STEELS FOR
GENERAL PURPOSES.)
NF F80-103-1989 铁路车辆.铁路车辆制造推荐使用的钢材.Ⅲ.抗大气腐蚀的结构钢材
(ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING
STOCK CONSTRUCTION. III. STRUCTURAL STEELS WITH
IMPROVED ATMOSPHERIC CORROSION RESISTANCE. COPPER
STEELS.)
NF F80-104-1981 铁路运输设备.制造铁路车辆推荐使用的钢材.IV. 制造高张力机具和压缩气贮器的碳钢和锰碳钢
(RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS
FOR RAILWAY ROLLING-STOCK CONSTRUCTION. IV :
STEELS FOR PLATES FOR PRESSURE VESSELS AND HIGHLY
STRESSED PARTS.)
NF F80-105-1982 铁路运输设备.制造铁路车辆推荐使用的钢材.V.适于热处理的锻制非合金钢
(Railway transport equipment. Recommended steels
for railway rolling-stock construction. V :
unalloyed forging steels suitable for heat treatment.)
NF F80-106-1986 铁路车辆.制造铁路车辆推荐使用的钢材.VI. 冷加工钢材
(Rolling stock. Recommended steels for rolling
stock construction. VI cold forming steels.)
NF F80-107-1984 铁路车辆.制造铁路车辆推荐使用的钢材.VII.热处理非合金钢和特种合金钢
(Rolling stock. Recommended steels for stock
construction. VII unalloyed and alloy heat treated
steels.)
NF F80-108-1980 铁路运输设备.制造铁路车辆推荐使用的钢材.VIII. 弹簧钢
(RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS
FOR RAILWAY ROLLING-STOCK CONSTRUCTION. VIII
: SPRING STEELS.)
NF F80-109-1984 铁路车辆.制造铁路车辆推荐使用的钢材.IY. 一般不锈钢
(Rolling stock. Recommanded steels for rolling
stock construction. IX stainless steels for
general purposes.)
NF F80-109-1984 铁路车辆.制造铁路车辆推荐使用的钢材.IY. 一般不锈钢
(Rolling stock. Recommanded steels for rolling
stock construction. IX stainless steels for
general purposes.)
NF J33-372-1987 游艇.不锈钢缆用拉紧装置和活动缆的固定接头.尺寸 (Small
craft. Rigging screws for stainless steel wire
rope. Principal dimensions for forks, connection
pins and eye-holes.)
NF J37-310-1946 造船工业.锚链.普通锚链环圆钢口径 (SHIPBUILDING.
ANCHOR CABLES. ROUND BARS FOR COMMON LINKS.)
NF J37-311-1946 造船工业.锚链.大链环和末端环圆钢口径 (SHIPBUILDING.
ANCHOR CABLES. ROUND BARS FOR ENLARGED AND END
LINKS.)
NF L12-005-2002 航空航天系列.热轧圆钢棒.标称公差.直径D≤6mm 至
D≤250mm.尺寸 (Aerospace series - Round bars, hot
rolled in steel - Normal tolerances - Diameter
6 mm inferior or equal to D inferior or equal
to 250 mm - Dimensions.)
NF L12-610-1968 耐热钢和钢合金半成品冷拉无缝圆钢管.航空和航天工业选用
(SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES
OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE
INDUSTRY.)
NF L16-004-1991 航空航天系列.涂料和清漆.不锈钢试件表面的性质和准备方法
(AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE
AND METHOD FOR PREPARATION OF SURFACE OF TEST
SPECIMENS IN CORROSION RESISTING STEEL.)
NF L21-106-1975 铆钉用铝合金、钢、耐热不锈钢合金线材.尺寸 (Wires
for rivets in aluminium alloys, steel, stainless
and heat resisting alloys. Dimensions.)
NF L21-203-1974 钢铆钉.不锈钢和耐热合金铆钉.技术规范 (STEEL RIVETS.
STAINLESS AND HEAT-RESISTING ALLOY RIVETS. TECHNICAL
SPECIFICATION.)
NF L22-517-1980 E-26 NCT 25 不锈钢制内紧锁十二角头螺母.ISO螺纹
(12 point self-locking flange nuts, in E-Z 6
nct 25 corrosion resisting steel. ISO thread.)
NF L22-526-1980 E-２６NCT２５不锈钢内锁紧十二角头螺毋.MJ 螺纹
(12 POINT SELF-LOCKING FLANGE NUTS IN E-Z 6
NCT 25 CORROSION RESISTING STEEL. MJ THREAD.)
NF L22-531-1977 E-２６NCT２５不锈钢制内锁紧嵌入螺母.ISO螺纹 (SELF-LOCKING
CLINCH NUTS,IN E-Z 6 NCT 25 CORROSION RESISTING
STEEL. ISO THREAD.)
NF L22-588-2000 航空用螺栓和螺母.镀银不锈钢制深槽单耳内锁紧系留螺母.ISO
M或ISO MJ螺纹.分类:1100 MPa/425度(室温下) (Aircraft bolts
and nuts - Nuts, anchor, self-locking, single
lug, with counterbore, ISO M or ISO MJ threads,
in corrosion resisting steel, silver plated
- Classification : 1 100 MPa (at ambient temper)
NF L31-209-1973 机身用轴承.不锈钢制弯管用单排滚珠刚性轴承.尺寸和负荷
(AIRFRAME BEARINGS,SINGLE ROW. RIGID TORQUE
TUBE BALL BEARINGS. CORROSION-RESISTING STEEL.
DIMENSIONS AND LOADS.)
NF L31-215-1973 机身用轴承.不锈钢制单排滚珠刚性轴承.尺寸和负荷 (AIRFRAME
BEARINGS,SINGLE ROW. RIGID BALL BEARINGS. CORROSION-RESISTING
STEEL. DIMENSIONS AND LOADS.)
NF L31-223-1973 机身用轴承.不锈钢制双排球面轴承.尺寸和负荷 (AIRFRAME
BEARINGS,DOUBLE ROW. SELF ALIGNING BALL BEARINGS.
CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.)
NF L31-227-1973 机身用轴承.不锈钢制单排球面滚珠轴承.尺寸和负荷 (AIRFRAME
BEARINGS,SINGLE ROW. SELF ALIGNING ROLLER BEARINGS.
CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.)
NF L43-611-1977 不锈钢制钎接带法兰的直接头 (FLANGED STRAIGHT
UNIONS,SOLDER TYPE,STAINLESS STEEL.)
NF M81-636-1986 煤矿器材.经链板输送机用高抗拉强度圆钢丝链环的校准链.规范.验收条件
(Mining equipment. High tensile steel chains
round link for chain conveyors and coal plough.
Specifications. Acceptance testing.)
NF M81-637-1986 煤矿器材.经通用连接链环用圆钢丝校准链 (MINING
EQUIPMENT. ROUND LINK TYPE CHAIN UNIVERSEL CONNECTORS
FOR CALIBRATED CHAINS. SPECIFICATIONS. ACCEPTANCE
TESTING.)
NF M81-801-1980 提升用圆钢丝缆.术语和定义 (CIRCULAR METAL
WIRE ROPES FOR HOISTING. VOCABULARY.)
NF M81-808-1966 采矿设备.提升用圆钢丝缆.三角式6股线芯型 (MINING
EQUIPMENT. CIRCULAR WIRE ROPES FOR HOISTING.
6 TRIANGULAR STRAND TYPES ON CENTRAL TEXTILE
CORE.)
NF P16-326-1-1999 废水系统用带套管的纵向焊接不锈钢管的管和配件.第1部分:要求、试验和质量控制
(Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems. Part 1 : requirements,
testing, quality control.)
NF P16-326-2-1999 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统S.尺寸
(Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems. Part 2 : systems S.
Dimensions.)
NF P16-326-3-1999 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统X.尺寸
(Pipes and fittings of longitudinally welded
stainless steel pipes with spigot and socket
for waste water systems. Part 3 : system X.
Dimensions.)
NF P34-303-2000 金属薄板制屋面制品.不锈钢薄板制成的全支撑屋面制品的规范
(Roofing products from metal sheet - Specification
for fully supported roofing products of stainless
steel sheet.)
NF P34-309-1-2000 金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第1部分:钢
(Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 1 : steel.)
NF P34-309-2-2000 金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第2部分:铝
(Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 2 : aluminium.)
NF P34-309-3-2000 金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第3部分:不锈钢
(Roofing products from metal sheet - Specification
for self-supporting products of steel, aluminium
or stainless steel sheet - Part 3 : stainless
steel.)
NF S90-361-1990 外科医疗器械.钉子.股骨最高端用的不锈钢片 (MEDICO-SURGICAL
EQUIPMENT. ROUGH-SURFACED STAINLESS STEEL NAIL
PLATES FOR THE UPPER END OF THE THIGHBONE. MATERIALS
AND DIMENSIONS.)
NF S90-414-1988 外科医疗器械.外科植入物.不对称螺纹和球形底座接骨用不锈钢螺丝.机械性能和试验
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY.
STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL
THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS
AND TESTING.)
NF S90-426-1988 外科医疗器械.外科植入物.不锈钢粗糙面骨干板.尺寸和表面特性
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY.
ROUGH SURFACE DIAPHYSIS PLATES MADE OF STAINLESS
STEEL. DIMENSIONAL AND SURFACE CHARACTERISTICS.)
NF S90-427-1990 外科医疗器械.脊椎用接骨器材.不锈钢制或钴基合金制脊椎板.A系统.尺寸与几何形状
(MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT
FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT
ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND
GEOMETRY.)
NF S90-450-1981 外科器械.止血钳.不锈钢.化学成分和硬度 (Surgical
instruments. Haemostatic forceps. Stainless
steel. Chemical composition and hardness.)
NF S93-004-1995 医疗器件制造用不锈钢针头管材 (STAINLESS STEEL
NEEDLE TUBING FOR THE MANUFACTURE O FMEDICAL
DEVICES. (EUROPEAN STANDARD EN ISO 9626).)
NF S93-004/A1-2001 医疗装置生产用不锈钢针管 (Stainless steel
needle tubing for the manufacture of medical
devices.)
NF S94-051-2000 外科植入物.金属材料.锻造不锈钢 (Implants for
surgery - Metallic materials - Wrought stainless
steel.)
NF S94-059-1997 外科植入物.金属材料.可锻高氮不锈钢 (Implants
for surgery. Metallic materials. Wrought high
nitrogen stainless steel.)
NF S94-090-2001 医疗外科设备.骨外科辅助定位装置用材料.马氏体不锈钢、弥散硬化不锈钢、奥氏体不锈钢和奥氏铁素体不锈钢
(Medico-surgical equipment - Materials for ancillary
positioning instruments for bone surgery - Martensitic,
precipitation hardening, austenitic and austeno-ferritic
stainless steels.)
NF S94-471-2000 外科设备.金属材料.第1部分:不锈钢 (Surgical
instruments - Metallic materials - Part 1 :
stainless steel.)
NF T35-505-4-1997 涂料和相关产品应用前钢铁衬底的准备.金属喷砂清理磨损的规范.第4部分:低碳铸钢的喷射(EN
ISO 11124-4) (Preparation of steel substrates
before application of paints and related products.
Specifications for metallic blast-cleaning abrasives.
Part 4 : low-carbon cast-steel shot.)
NF X08-104-1987 颜色.钢铁工厂.管道系统的标记 (Colours. Iron
and stellfactories. Marking of fluids in pipes.)
NF X11-510-1988 筛和筛分.工业用退火圆钢丝制方孔金属筛.钢丝直径 (SIEVES
AND SIEVING. WIRE GAUZE WITH SQUARE APERTURES
MADE FROM ANNEALED ROUND WIRE FOR INDUSTRIAL
USE. WIRE DIAMETERS.)
中国钢铁标准(Steel standards)
--------------------------------------------------------------------------------
GB/T 229-1994 金属夏比缺口冲击试验方法 Metallic materials-Charpy
notch impact test
DL/T 768.7-2002 电力金具制造质量 钢铁件热镀锌层 ()
GB 13456-1992 钢铁工业水污染物排放标准 Discharge standard
of water pollutants for iron and steel industry
GB 16487.6-2005 进口可用作原料的固体废物环境保护控制标准废钢铁 Environmental
protection control standard for imported solid
wastes as raw materials -- Waste and scrap of
iron and steel
GB 17567-1998 核设施的钢铁和铝再循环再利用的清洁解控水平 Clearance
levels for recycle and reuse of steel and aluminium
from nuclear facilities
GB 4223-2004 废钢铁 Iron and steel scraps
GB/T 11261-2006 钢铁氧含量的测定脉冲加热惰气熔融-红外线吸收法 Steel
and ironDetermination of oxygen content The
pulse heating inert gas fusion-infra-red absorption
method
GB/T 11354-2005 钢铁零件渗氮层深度测定和金相组织检验 Determination
of nitrided case depth and metallographic microstructure
examination for steeliron parts
GB/T 13346-1992 金属覆盖层钢铁上的镉电镀层 Metallic coatings--Electroplated
coatingsof cadmium on iron and steel
GB/T 13452.4-1992 色漆和清漆钢铁表面上的丝状腐蚀试验 Paints and
varnishes--Filiform corrosion test on steel
GB/T 13912-2002 金属覆盖层钢铁制件热浸镀锌层技术要求及试验方法 Metallic
coatings--Hot dip galvanized coatings on fabricated
iron and steel articles--Specifications and
test methods
GB/T 14203-1993 钢铁及合金光电发射光谱分析法通则 General rule
for photoelectric emission spectroscopic analysis
of iron，steel and alloy
GB/T 15519-2002 化学转化膜钢铁黑色氧化膜规范和试验方法 Chemical
conversion coatings--Black oxide coating on
iron and steel--Specification and test methods
GB/T 17616-1998 钢铁及合金牌号统一数字代号体系 Unified numbering
system for designations of iron，steel and alloy
GB/T 18592-2001 金属覆盖层钢铁制品热浸镀铝技术条件 Metallic coating--Hot
dipped aluminium coatings on ferrous articles--Specification
GB/T 18683-2002 钢铁件激光表面淬火 Laser surface hardening
of iron and steel parts
GB/T 18916.2-2002 取水定额第2部分:钢铁联合企业 Norm of water
intake--Part 2:Iron and steel complex
GB/T 19349-2003 金属和其他无机覆盖层为减少氢脆危险的钢铁预处理 Metallic
and other inorganic coatings--Pretreatment of
iron or steel to reduce the risk of hydrogen
embrittlement
GB/T 19350-2003 金属和其他无机覆盖层为减少氢脆危险的涂覆后钢铁的处理 Metallic
and other inorganic coatings--Post-coating treatments
of iron or steel to reduce the risk of hydrogen
embrittlement
GB/T 19355-2003 钢铁结构耐腐蚀防护锌和铝覆盖层指南 Protection
against corrosion ofiron and steel in structures--Zinc
and aluminum coatings--Guidelines
GB/T 20123-2006 钢铁总碳硫含量的测定高频感应炉燃烧后红外吸收法（常规方法）
Steel and iron -- Determination of total carbon
and sulfur content -- Infrared absorption method
after combustion in an induction furnace (routine
method)
GB/T 20124-2006 钢铁氮含量的测定惰性气体熔融热导法（常规方法） Steel
and iron -- Determination of nitrogen content
-- Thermal conductimetric method after fusion
in a current of inert gas (Routine method)
GB/T 20127.1-2006 钢铁及合金痕量元素的测定第1部分：石墨炉原子吸收光谱法测定银含量
Steel and alloy - Determination of trace element
contents Part 1: Determination of silver content
by graphite furnace atomic absorption spectrometric
method
GB/T 20127.10-2006 钢铁及合金痕量元素的测定第10部分：氢化物发生-原子荧光光谱法测定硒含量
Steel and alloy - Determination of trace element
contents Part 10: Determination of selenium
content by hydride generation-atomic fluorescence
spectrometric method
GB/T 20127.11-2006 钢铁及合金痕量元素的测定第11部分：电感耦合等离子体质谱法测定铟和铊含量
Steel and alloy - Determination of trace element
contents Part 11: Determination of indium and
thallium content by inductively coupled plasma-mass
spectrometric method
GB/T 20127.12-2006 钢铁及合金痕量元素的测定第12部分：火焰原子吸收光谱法测定锌含量
Steel and alloy - Determination of trace element
contents Part 12: Determination of zinc content
by flame atomic absorption spectrometric method
GB/T 20127.13-2006 钢铁及合金痕量元素的测定第13部分：碘化物萃取-苯基荧光酮光度法测定锡含量
Steel and alloy - Determination of trace element
contents Part 13: Determination of tin content
by iodide extraction-phenylfluorone photometric
method
GB/T 20127.2-2006 钢铁及合金痕量元素的测定第2部分：氢化物发生-原子荧光光谱法测定砷含量
Steel and alloy - Determination of trace element
contents Part2: Determination of arsenic content
by hydride generation-atomic fluorescence spectrometric
method
GB/T 20127.3-2006 钢铁及合金痕量元素的测定第3部分：电感耦合等离子体发射光谱法测定钙、镁和钡含量
Steel and alloy - Determination of trace element
contents Part3:Determination of calcium,magnesium,barium
content by inductively coupled plasma atomic
emission spectrometric method
GB/T 20127.4-2006 钢铁及合金痕量元素的测定第4部分：石墨炉原子吸收光谱法测定铜含量
Steel and alloy - Determination of trace element
contents Part 4: Determination of copper content
by graphite furnace atomic absorption spectrometric
method
GB/T 20127.5-2006 钢铁及合金痕量元素的测定第5部分：萃取分离-罗丹明B光度法测定镓含量
Steel and alloy - Determination of trace element
contents Part 5: Determination of gallium content
by extraction separation-rhodamine B photometric
method
GB/T 20127.6-2006 钢铁及合金痕量元素的测定第6部分：没食子酸-示波极谱法测定锗含量
Steel and alloy - Determination of trace element
contents Part 6: Determination of germanium
content by gallic acid oscillopolarographic
method
GB/T 20127.7-2006 钢铁及合金痕量元素的测定第7部分：示波极谱法测定铅含量
Steel and alloy - Determination of trace element
contents Part 7: Determination of lead content
by oscillopolarographic method
GB/T 20127.8-2006 钢铁及合金痕量元素的测定第8部分：氢化物发生-原子荧光光谱法测定锑含量
Steel and alloy - Determination of trace element
contents Part 8: Determination of antimony content
by hydride generation-atomic fluorescence spectrometric
method
GB/T 20127.9-2006 钢铁及合金痕量元素的测定第9部分：电感耦合等离子体发射光谱法测定钪含量
Steel and alloy - Determination of trace element
contents Part 9: Determination of scandium content
by inductively coupled plasma atomic emission
spectrometric method
GB/T 221-2000 钢铁产品牌号表示方法 Notations for designations
of iron and steel
GB/T 223.10-2000 钢铁及合金化学分析方法铜铁试剂分离-铬天青S光度法测定铝含量
Methods for chemical analysis of iron，steel
and alloy--The cupferron separation-chrome azurol
S photometric method for the determination of
aluminium content
GB/T 223.11-1991 钢铁及合金化学分析方法过硫酸铵氧化容量法测定铬量 Methods
for chemical analysis of iron，steel and alloy--The
ammonium persulfate oxidation volumetric method
for the determination of chromium content
GB/T 223.12-1991 钢铁及合金化学分析方法碳酸钠分离-二苯碳酰二肼光度法测定铬量
Methodsfor chemical analysis of iron，steel and
alloy--The sodium carbonate separation-diphenyl
carbazide photometric method for the determination
of chromium content
GB/T 223.13-2000 钢铁及合金化学分析方法硫酸亚铁铵滴定法测定钒含量 Methods
for chemical analysis of iron，steel and alloy--The
ammonium ferrous sulfate titrationmethod for
the determination of vanadium content
GB/T 223.14-2000 钢铁及合金化学分析方法钽试剂萃取光度法测定钒含量 Methods
for chemical analysis of iron，steel and alloy--The
N-benzoy-N-phenylhydroxylamine extraction photometric
method for the determination of vanadium content
GB/T 223.16-1991 钢铁及合金化学分析方法变色酸光度法测定钛量 Methods
for chemical analysis of iron，steel and alloy--The
chromotropic acid photometric method for the
determination of titanium content
GB/T 223.17-1989 钢铁及合金化学分析方法二安替比林甲烷光度法测定钛量 Methods
for chemical analysis of iron，steel and alloy--The
diantipyryl methane photometric method for the
determination of titanium content
GB/T 223.18-1994 钢铁及合金化学分析方法硫代硫酸钠分离-碘量法测定铜量
Methods for chemical analysis of iron，steel
and alloy--The sodium thiosulfate separation
iodimetric method for the determination of copper
content
GB/T 223.19-1989 钢铁及合金化学分析方法新亚铜灵-三氯甲烷萃取光度法测定铜量
Methods for chemical analysis of iron，steel
and alloy--The neocuproine-chloroform extraction
photometric method for the determination of
copper content
GB/T 223.20-1994 钢铁及合金化学分析方法电位滴定法测定钴量 Methods
for chemical analysis of iron，steel and alloy--The
fotentiometric titration method for the determination
of cobalt content
GB/T 223.21-1994 钢铁及合金化学分析方法5-Cl-PADAB分光光度法测定钴量
Methods for chemical analysis of iron，steel
and alloy--The 5-Cl-PADAB spectrophotometricmethod
for the determination of cobalt content
GB/T 223.22-1994 钢铁及合金化学分析方法亚硝基R 盐分光光度法测定钴量
Methods for chemical analysis of iron，steel
and alloy--The nitroso-R-salt spectrophotometric
method for the determination of cobalt content
GB/T 223.23-1994 钢铁及合金化学分析方法丁二酮肟分光光度法测定镍量 Methods
for chemical analysis of iron，steel and alloy--The
dimethylglyoxime spectrophotometricmethod for
the determination of nickel content
GB/T 223.24-1994 钢铁及合金化学分析方法萃取分离-丁二酮肟分光光度法测定镍量
Methods for chemical analysis of iron，steel
and alloy--The extraction separation--The dimethylglyoxime
spectrophotometric method for the determination
of nickel content
GB/T 223.25-1994 钢铁及合金化学分析方法丁二酮肟重量法测定镍量 Methods
for chemical analysis of iron，steel and alloy--The
dimethylglyoxime gravimetric method forthe determination
of nickel content
GB/T 223.26-1989 钢铁及合金化学分析方法硫氰酸盐直接光度法测定钼量 Methods
for chemical analysis of iron，steel and alloy--The
thiocyanate direct photometric method for the
determination of molybdenum content
GB/T 223.27-1994 钢铁及合金化学分析方法硫氰酸盐-乙酸丁酯萃取分光光度法测定钼量
Methods for chemical analysis of iron，steel
and alloy--The thiocyanate-butyl acetate extraction
spectrophotometric method for the determination
of molybdenum content
GB/T 223.28-1989 钢铁及合金化学分析方法α-安息香肟重量法测定钼量 Methods
for chemical analysis of iron，steel and alloy--The
α-benzoinoxime gravimetric method for the determination
of molybdenum content
GB/T 223.29-1984 钢铁及合金化学分析方法 载体沉淀-二甲酚橙光度法测定铅量
Methods for chemical analysis of iron，steel
and alloy--The xylenol orange photometric method
for determination of lead content after carrier
precipit-ation
GB/T 223.3-1988 钢铁及合金化学分析方法二安替比林甲烷磷钼酸重量法测定磷量
Methods forchemical analysis of iron，steel and
alloy--The diantipyryl methane phosphomolybdate
gravimetric method for the determination of
phosphorus content
GB/T 223.30-1994 钢铁及合金化学分析方法对-溴苦杏仁酸沉淀分离-偶氮胂Ⅲ分光光度法测定锆量
Methods for chemical analysis of iron，steel
and alloy--The arsenazo Ⅲspectrophotometric
method for the determination of zirconium content
after separation by p-bromomandelic acid
GB/T 223.31-1994 钢铁及合金化学分析方法蒸馏分离-钼蓝分光光度法测定砷量
Methods for chemical analysis of iron，steel
and alloy--The distillation-molybdenum bluespectrophotometric
method for the determination of arsenic content
GB/T 223.32-1994 钢铁及合金化学分析方法次磷酸钠还原-碘量法测定砷量 Methods
for chemical analysis of iron，steel and alloy--The
hypophosphite reduction-iodimetric method for
the determination of arsenic content
GB/T 223.33-1994 钢铁及合金化学分析方法萃取分离-偶氮氯膦mA光度法测定铈量
Methods forchemical analysis of iron，steel and
alloy--The chlorophosphonago mA photometric
method for the determination of cerium content
after extraction separation
GB/T 223.34-2000 钢铁及合金化学分析方法铁粉中盐酸不溶物的测定 Methods
for chemical analysis of iron，steel and alloy--The
determination of hydrochloric acid-insoluble
content of iron powders
GB/T 223.36-1994 钢铁及合金化学分析方法蒸馏分离-中和滴定法测定氮量 Methods
for chemical analysis of iron，steel and alloy--The
neutral titration method for the determination
of nitrogen content after distillation separation
GB/T 223.37-1989 钢铁及合金化学分析方法蒸馏分离-靛酚蓝光度法测定氮量
Methods for chemical analysis of iron，steel
and alloy--The indophenol blue photometric method
for the determination of nitrogen content after
distillation separation
GB/T 223.38-1985 钢铁及合金化学分析方法离子交换分离-重量法测定铌量 Methods
for chemical analysis of iron，steel and alloy--The
anion-exchange separation-gravimetric method
for the determination of niobium content
GB/T 223.4-1988 钢铁及合金化学分析方法硝酸铵氧化容量法测定锰量 Methods
for chemical analysis of iron，steel and alloy--The
volumetric method for determination of manganese
content by ammonium nitrate oxidation
GB/T 223.41-1985 钢铁及合金化学分析方法离子交换分离-连苯三酚光度法测定钽量
Methods for chemical analysis of iron，steel
and alloy--The anion-exchange separation-pyrogallol
photometric method for the determination of
tantalum content
GB/T 223.42-1985 钢铁及合金化学分析方法离子交换分离-溴邻苯三酚红光度法测定钽量
Methods for chemical analysis of iron，steel
and alloy--The anion-exchange separation-bromopyrogallol
red photometric method for the determination
of tantalumcontent
GB/T 223.43-1994 钢铁及合金化学分析方法钨量的测定 Methods for
chemical analysis of iron，steel and alloy--Determination
of tungsten content
GB/T 223.46-1989 钢铁及合金化学分析方法火焰原子吸收光谱法测定镁量 Methods
for chemical analysis of iron，steel and alloy--The
flame atomic absorption spectrometric method
for the determination of magnesium content
GB/T 223.47-1994 钢铁及合金化学分析方法载体沉淀-钼蓝光度法测定锑量 Methods
for chemical analysis of iron，steel and alloy--The
carrier precipitation-molybdenumblue potometric
method for the determination of antimony content
GB/T 223.48-1985 钢铁及合金化学分析方法半二甲酚橙光度法测定铋量 Methods
for chemical analysis of iron，steel and alloy--The
semixylenol orange photometric method for the
determination of bismuth content
GB/T 223.49-1994 钢铁及合金化学分析方法萃取分离-偶氮氯膦mA分光光度法测定稀土总量
Methods for chemical analysis of iron，steel
and alloy--Extraction separation-chlorophosphonazo
mA spectro-photometric method for the determination
of the total rare earth content
GB/T 223.5-1997 钢铁及合金化学分析方法还原型硅钼酸盐光度法测定酸溶硅含量
Methods forchemical analysis of iron，steel and
alloy--The reduced molybdosilicate spectro-photometric
method for the determination of acid-soluble
silicon content
GB/T 223.50-1994 钢铁及合金化学分析方法苯基荧光酮-溴化十六烷基三甲基胺直接光度法测定锡量
Methods for chemical analysis of iron，steel
and alloy--The phenylfluorone-CTMAB direct photometric
method for the determination of tin content
GB/T 223.51-1987 钢铁及合金化学分析方法 5-Br-PADAP 光度法测定锌量
Methods for chemical analysis of iron，steel
and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol
photometric method for the determination of
zinc content
GB/T 223.52-1987 钢铁及合金化学分析方法盐酸羟胺-碘量法测定硒量 Methods
for chemical analysis of iron，steel and alloy--The
hydroxylamine hydrochloride-iodometric method
for the determination of selenium content
GB/T 223.53-1987 钢铁及合金化学分析方法火焰原子吸收分光光度法测定铜量
Methods for chemical analysis of iron，steel
and alloy--The flame atomic absorption spectrophotometric
method for the determination of copper content
GB/T 223.54-1987 钢铁及合金化学分析方法火焰原子吸收分光光度法测定镍量
Methods for chemical analysis of iron，steel
and alloy--The flame atomic absorption spectrophotometric
method for the determination of nickel content
GB/T 223.55-1987 钢铁及合金化学分析方法示波极谱( 直接 )法测定碲量
Methods for chemical analysis of iron，steel
and alloy--The direct oscillopolarographic method
for the determination of tellerium content
GB/T 223.56-1987 钢铁及合金化学分析方法巯基棉分离-示波极谱法测定碲量
Methods for chemical analysis of iron，steel
and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic
method for the determination of tellurium content
GB/T 223.57-1987 钢铁及合金化学分析方法 萃取分离-吸附催化极谱法测定镉量
Methods for chemical analysis of iron，steel
and alloy--The extraction-absorption catalytic
polarographic method for the determination of
cadmium content
GB/T 223.58-1987 钢铁及合金化学分析方法 亚砷酸钠-亚硝酸钠滴定法测定锰量
Methods for chemical analysis of iron，steel
and alloy--The extraction-absorption catalytic
polarographic method for the determination of
manganese content
GB/T 223.59-1987 钢铁及合金化学分析方法锑磷钼蓝光度法测定磷量 Methods
for chemical analysis of iron，steel and alloy--The
sodium arsenite-sodium nitrite titrimetric method
for the determination of phosphorus content
GB/T 223.6-1994 钢铁及合金化学分析方法中和滴定法测定硼量 Methods
for chemical analysis of iron，steel and alloy--The
neutralization titrimetric method for the determination
of boron content
GB/T 223.60-1997 钢铁及合金化学分析方法高氯酸脱水重量法测定硅含量 Methods
for chemical analysis of iron，steel and alloy--The
perchloric acid dehydration gravimetric method
for the determination of silicon content
GB/T 223.61-1988 钢铁及合金化学分析方法磷钼酸铵容量法测定磷量 Methods
for chemical analysis of iron，steel and alloy--The
ammonium phosphomolybdate volumetric method
for the determination of phosphorus content
GB/T 223.62-1988 钢铁及合金化学分析方法乙酸丁酯萃取光度法测定磷量 Methods
for chemical analysis of iron，steel and alloy--The
butyl acetate extraction photometric method
for the determination of phosphorus content
GB/T 223.63-1988 钢铁及合金化学分析方法高碘酸钠(钾)光度法测定锰量 Methods
for chemical analysis of iron，steel and alloy--The
sodium (potassium) periodate photometric method
for the determination of manganese content
GB/T 223.64-1988 钢铁及合金化学分析方法火焰原子吸收光谱法测定锰量 Methods
for chemical analysis of iron，steel and alloy--The
flame atomic absorption spectrometric method
for the determination of manganese content
GB/T 223.65-1988 钢铁及合金化学分析方法火焰原子吸收光谱法测定钴量 Methods
for chemical analysis of iron，steel and alloy--The
flame atomic absorption spectrometric method
for the determination of cobalt content
GB/T 223.66-1989 钢铁及合金化学分析方法硫氰酸盐-盐酸氯丙嗪-三氯甲烷萃取光度法测定钨量
Methods for chemical analysis of iron，steel
and alloy--The thiocyanate chlorpromazine hydrochloride--chloro
form extraction photometric method for the determination
of tungsten content
GB/T 223.67-1989 钢铁及合金化学分析方法还原蒸馏-次甲基蓝光度法测定硫量
Methods for chemical analysis of iron，steel
and alloy--The reducing distillation-methylene
blue photometric method for the determination
of sulfur content
GB/T 223.68-1997 钢铁及合金化学分析方法管式炉内燃烧后碘酸钾滴定法测定硫含量
Methods for chemical analysis of iron，steel
and alloy--The potassium iodate titration method
after combustion in the pipe furnace for the
determination of sulfur content
GB/T 223.69-1997 钢铁及合金化学分析方法 管式炉内燃烧后气体容量法测定碳含量
Methods for chemical analysis of iron，steel
and alloy--The gas-volumetric method after combustion
in the pipe furnace for the determination of
carbon content
GB/T 223.70-1989 钢铁及合金化学分析方法邻菲啰啉分光光度法测定铁量 Methods
for chemical analysis of iron，steel and alloy--The
o-phenanthroline spectrophotometric method for
the determination of iron content
GB/T 223.71-1997 钢铁及合金化学分析方法 管式炉内燃烧后重量法测定碳含量
Methods for chemical analysis of iron，steel
and alloy--The gravimetric method after combustion
in the pipe furnace for the determination of
carbon content
GB/T 223.72-1991 钢铁及合金化学分析方法氧化铝色层分离-硫酸钡重量法测定硫量
Methods for chemical analysis of iron，steel
and alloy--The alumina chromatographic separation-bar-ium
sulfate gravimetric method for the determination
of sulphur content
GB/T 223.73-1991 钢铁及合金化学分析方法三氯化钛-重铬酸钾容量法测定铁量
Methods for chemical analysis of iron，steel
and alloy--The titanium trichloride-potassium
dichromate volumetric method for the determination
of iron content
GB/T 223.74-1997 钢铁及合金化学分析方法非化合碳含量的测定 Methods
for chemical analysis of iron，steel and alloy--The
combustion gravimetric/gas-volumetric method
for the determination of non-combined carbon
content
GB/T 223.75-1991 钢铁及合金化学分析方法甲醇蒸馏-姜黄素光度法测定硼量
Methods for chemical analysis of iron，steel
and alloy--The methanol distillation-curcuminphotometric
method for the determination of boron content
GB/T 223.76-1994 钢铁及合金化学分析方法火焰原子吸收光谱法测定钒量 Methods
for chemical analysis of iron，steel and alloy--The
flame atomic absorption spectrometric method
for the determination of vanadium content
GB/T 223.77-1994 钢铁及合金化学分析方法火焰原子吸收光谱法测定钙量 Methods
for chemical analysis of iron，steel and alloy--The
flame atomic absorption spectrometric method
for the determination of calcium content
GB/T 223.78-2000 钢铁及合金化学分析方法姜黄素直接光度法测定硼含量 Methods
for chemical analysis of iron，steel and alloy--Curcumin
spectrophotometric method for the determination
of boron content
GB/T 223.8-2000 钢铁及合金化学分析方法氟化钠分离-EDTA滴定法测定铝含量
Methods for chemical analysis of iron，steel
and alloy--The sodium fluoride separation--EDTA
titration method for the determination of aluminium
content
GB/T 223.9-2000 钢铁及合金化学分析方法铬天青S光度法测定铝含量 Methods
for chemical analysis of iron，steel and alloy--The
chrome azurol S photometric methodfor the determination
of aluminium content
GB/T 6807-2001 钢铁工件涂装前磷化处理技术条件 Specifications
for phosphating treatment of iron and steel
parts before painting
GB/T 9799-1997 金属覆盖层钢铁上的锌电镀层 Metallic coatings--Electroplated
coatingsof zinc on iron or steel
JB/T 10174-2000 钢铁零件强化喷丸的质量检验方法 ()
JB/T 5067-1999 钢铁制件粉末渗锌 ()
JB/T 8928-1999 钢铁制件机械镀锌 ()
JB/T 9200-1999 钢铁件的火焰淬火回火处理 ()
JB/T 9206-1999 钢铁热浸铝工艺及质量检验 ()
YB/T 804-1995 钢铁渣处理及利用技术术语 ()
YBJ 64-1991 钢铁企业电信设计图形符号 ()
ISO钢铁标准(ISO steel standards)
--------------------------------------------------------------------------------
ISO 1035-1-1980 热轧钢棒材 第1部分:圆钢尺寸 Hot-rolled
steel bars; Part 1 : Dimensions of round bars
ISO 10792-1-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第1部分:米制系列
Aerospace - Airframe spherical plain bearings
in corrosion-resisting steel with self-lubricating
liner - Part 1: Metric series
ISO 10792-2-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第2部分:英制系列
Aerospace - Airframe spherical plain bearings
in corrosion-resisting steel with self-lubricating
liner - Part 2: Inch series
ISO 10792-3-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第3部分:技术规范
Aerospace - Airframe spherical plain bearings
in corrosion-resisting steel with self-lubricating
liner - Part 3: Technical specification
ISO 11124-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求
第1部分:一般介绍及分类 Preparation of steel substrates
before application of paints and related products;
specifications for metallic blast-cleaning abrasives;
part 1: general introduction and classification
ISO 11124-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求
第2部分:冷硬铸铁丸 Preparation of steel substrates before
application of paints and related products;
specifications for metallic blast-cleaning abrasives;
part 2: chilled-iron grit
ISO 11124-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求
第3部分:高碳铸钢丸和砂 Preparation of steel substrates
before application of paints and related products;
specifications for metallic blast-cleaning abrasives;
part 3: high-carbon cast-steel shot and grit
ISO 11124-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求
第4部分:低碳铸钢丸 Preparation of steel substrates before
application of paints and related products;
specifications for metallic blast-cleaning abrasives;
part 4: low-carbon cast-steel shot
ISO 11125-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法
第1部分:抽样 Preparation of steel substrates before
application of paints and related products;
test methods for metallic blast-cleaning abrasives;
part 1: sampling
ISO 11125-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法
第2部分:颗粒尺寸分布的测定 Preparation of steel substrates
before application of paints and related products;
test methods for metallic blast-cleaning abrasives;
part 2: determination of particle size distribution
ISO 11125-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法
第3部分:硬度测定 Preparation of steel substrates before
application of paints and related products;
test methods for metallic blast-cleaning abrasives;
part 3: determination of hardness
ISO 11125-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法
第4部分:表观密度测定 Preparation of steel substrates
before application of paints and related products;
test methods for metallic blast-cleaning abrasives;
part 4: determination of apparent density
ISO 11125-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法
第5部分:缺陷颗粒的百分比和微结构的测定 Preparation of steel substrates
before application of paints and related products;
test methods for metallic blast-cleaning abrasives;
part 5: determination of percentage defective
particles and of microstructure
ISO 11125-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法
第6部分:外来杂质测定 Preparation of steel substrates
before application of paints and related products;
test methods for metallic blast-cleaning abrasives;
part 6: determination of foreign matter
ISO 11125-7-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法
第7部分:含水量测定 Preparation of steel substrates before
application of paints and related products;
test methods for metallic blast-cleaning abrasives;
part 7: determination of moisture
ISO 11126-1 Technical Corrigendum 1-1997 涂装油漆和有关产品前钢材预处理
喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误1 Preparation
of steel substrates before application of paints
and related products - Specifications for non-metallic
blast-cleaning abrasives - Part 1: General introduction
and classification; Technical Corrigendum 1
ISO 11126-1 Technical Corrigendum 2-1997 涂装油漆和有关产品前钢材预处理
喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误2 Preparation
of steel substrates before application of paints
and related products - Specifications for non-metallic
blast-cleaning abrasives - Part 1: General introduction
and classification; Technical Corrigendum 2
ISO 11126-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第1部分:总体介绍和分类 Preparation of steel substrates
before application of paints and related products;
specifications for non-metallic blast-cleaning
abrasives; part 1: general introduction and
classification
ISO 11126-10-2000 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第10部分:铁铅石榴石 Preparation of steel substrates
before application of paints and related products
- Specifications for non-metallic blast-cleaning
abrasives - Part 10: Almandite garne
ISO 11126-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第3部分:铜精炼渣 Preparation of steel substrates before
application of paints and related products;
specifications for non-metallic blast-cleaning
abrasives; part 3: copper refinery slag
ISO 11126-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第4部分:煤炉渣 Preparation of steel substrates before
application of paints and related products;
specifications for non-metallic blast-cleaning
abrasives; part 4: coal furnace slag
ISO 11126-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第5部分:镍精炼渣 Preparation of steel substrates before
application of paints and related products;
specifications for non-metallic blast-cleaning
abrasives; part 5: nickel refinery slag
ISO 11126-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第6部分:炼铁炉渣 Preparation of steel substrates before
application of paints and related products;
specifications for non-metallic blast-cleaning
abrasives; part 6: iron furnace slag
ISO 11126-7 Technical Corrigendum 1-1999 涂装油漆和有关产品前钢材预处理
喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 技术勘误1 Preparation
of steel substrates before application of paints
and related products - Specifications for non-metallic
blast-cleaning abrasives - Part 7: Fused aluminium
oxide; Technical Corrigendum 1
ISO 11126-7-1995 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第7部分:熔融氧化铝 Preparation of steel substrates before
application of paints and related products -
Specifications for non-metallic blast-cleaning
abrasives - Part 7: Fused aluminium oxide
ISO 11126-8-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第8部分:橄榄石砂 Preparation of steel substrates before
application of paints and related products;
specifications for non-metallic blast-cleaning
abrasives; part 8: olivine sand
ISO 11126-9-1999 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求
第9部分:十字石 Preparation of steel substrates before
application of paints and related products -
Specifications for non-metallic blast-cleaning
abrasives - Part 9: Staurolite
ISO 11127-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法
第1部分:抽样 Preparation of steel substrates before
application of paints and related products;
test methods for non-metallic blast-cleaning
abrasives; part 1: sampling
ISO 11127-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法
第2部分:颗粒尺寸分布的测定 Preparation of steel substrates
before application of paints and related products;
test methods for non-metallic blast-cleaning
abrasives; part 2: determination of particle
size distribution
ISO 11127-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法
第3部分:表观密度测定 Preparation of steel substrates
before application of paints and related products;
test methods for non-metallic blast-cleaning
abrasives; part 3: determination of apparent
density
ISO 11127-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法
第4部分:通过玻璃载片试验评定硬度 Preparation of steel substrates
before application of paints and related products;
test methods for non-metallic blast-cleaning
abrasives; part 4: assessment of hardness by
a glass slide test
ISO 11127-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法
第5部分:含水量测定 Preparation of steel substrates before
application of paints and related products;
test methods for non-metallic blast-cleaning
abrasives; part 5: determination of moisture
ISO 11127-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法
第6部分:通过测量电导率测定水溶性杂质 Preparation of steel substrates
before application of paints and related products;
test methods for non-metallic blast-cleaning
abrasives; part 6: determination of water-soluble
contaminants by conductivity measurement
ISO 11127-7-1993 涂装油漆和有关产品前钢材预处理 非金属喷沙清理磨料的试验方法
第7部分:水溶性氯化物的测定 Preparation of steel substrates
before application of paints and related products;
test methods for non-metallic blast-cleaning
abrasives; part 7: determination of water-soluble
chlorides
ISO 1127-1992 不锈钢管 尺寸、公差和单位长度的公称质量 Stainless
steel tubes; dimensions, tolerances and conventional
masses per unit length
ISO 11408-1999 化学转化膜 钢铁上的黑色氧化膜 规范和试验方法 Chemical
conversion coatings - Black oxide coating on
iron and steel - Specification and test methods
ISO 12858-1-1999 光学和光学仪器 大地测量仪器辅助装置 第1部分:殷钢水平支柱
Optics and optical instruments - Ancillary devices
for geodetic instruments - Part 1: Invar levelling
staffs
ISO 13520-2002 奥氏体不锈钢铸件中铁素体含量的测定 Determination
of ferrite content in austenitic stainless steel
castings
ISO 14343 AMD 1-2006 电焊消耗品.不锈钢和耐热钢电弧焊用焊丝电极、焊丝和焊条.分类.修改件1:埋弧焊和电渣焊用条状电极的补充
Welding consumables - Wire electrodes, wires
and rods for arc welding of stainless and heat
resisting steels - Classification; Amendment
1: Addition of strip electrodes for submerged
arc welding and electroslag welding
ISO 14343-2002 电焊消耗品.不锈钢和耐热钢电弧焊用焊丝电极、焊丝和焊条.分类
Welding consumables - Wire electrodes, wires
and rods for arc welding of stainless and heat
resisting steels - Classification
ISO 1461-1999 钢铁制件的热浸锌层 规范和试验方法 Hot dip galvanized
coatings on fabricated iron and steel articles
- Specifications and test methods
ISO 15730-2000 金属和其他无机覆盖层 抛光作为精加工和钝化不锈钢的方法 Metallic
and other inorganic coatings - Electropolishing
as a means of smoothing and passivating stainless
steel
ISO 15787-2001 技术产品文献 热处理钢铁部件 表述和表示 Technical
product documentation - Heat-treated ferrous
parts - Presentation and indications
ISO 16048-2003 耐腐蚀不锈钢紧固件的钝化 Passivation of corrosion-resistant
stainless-steel fasteners
ISO 16143-1-2004 通用不锈钢.第1部分:扁平制品 Stainless steels
for general purposes - Part 1: Flat products
ISO 16143-2-2004 通用不锈钢.第2部分:半成品棒材、杆材和型材 Stainless
steels for general purposes - Part 2: Semi-finished
products, bars, rods and sections
ISO 16143-3-2005 通用不锈钢.第3部分:钢丝 Stainless steels
for general purposes - Part 3: Wire
ISO 17053-2005 钢铁.氧的测定.在惰性气体中熔化后的红外法 Steel and
iron - Determination of oxygen - Infrared method
after fusion under inert gas
ISO 17058-2004 钢铁.砷含量的测定.分光光度法 Steel and iron
- Determination of arsenic content - Spectrophotometric
method
ISO 17633-2004 焊接消耗品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Welding consumables - Tubular cored electrodes
and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting
steels - Classification
ISO 18286-2004 热轧不锈钢板.尺寸和形状公差 Hot-rolled stainless
steel plates - Tolerances on dimensions and
shape
ISO 2037-1992 食品工业用不锈钢管 Stainless steel tubes
for the industry
ISO 2081-1986 金属覆盖层 钢铁上锌电镀层 Metallic coatings;
Electroplated coatings of zinc on iron or steel
ISO 2082-1986 金属覆盖层 钢铁上镉电镀层 Metallic coatings;
Electroplated coatings of cadmium on iron or
steel
ISO 2338-1997 不淬硬钢和奥氏体不锈钢 圆锥销 Parallel pins,
of unhardened steel and austenitic stainless
steel
ISO 2851-1993 食品工业用不锈钢弯头和三通 Stainless steel
bends and tees for the food industry
ISO 2852-1993 食品工业用不锈钢套管 Stainless steel clamp
pipe couplings for the food industry
ISO 2853-1993 食品工业用不锈钢螺纹接管器 Stainless steel
threaded couplings for the food industry
ISO 3506-1-1997 耐腐蚀不锈钢紧固件的机械性能 第1部分:螺栓、螺钉和螺柱
Mechanical properties of corrosion-resistant
stainless-steel fasteners - Part 1: Bolts, screws
and studs
ISO 3506-2-1997 耐腐蚀不锈钢紧固件的机械性能 第2部分:螺母 Mechanical
properties of corrosion-resistant stainless-steel
fasteners - Part 2: Nuts
ISO 3506-3-1997 耐腐蚀不锈钢紧固件的机械性能 第3部分:紧定螺钉及类似的不受拉应力的螺纹紧固件
Mechanical properties of corrosion-resistant
stainless-steel fasteners - Part 3: Set screws
and similar fasteners not under tensile stress
ISO 3506-4-2003 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 Mechanical
properties of corrosion-resistant stainless-steel
fasteners - Part 4: Tapping screws
ISO 3581-2003 焊料.不锈钢和耐热钢的手工金属电弧焊接用涂剂焊条.分类 Welding
consumables - Covered electrodes for manual
metal arc welding of stainless and heat-resisting
steels - Classification
ISO 3651-1-1998 不锈钢耐晶间腐蚀的测定 第1部分:奥氏体和铁素体奥氏体(二重)不锈钢
用失重测定法在硝酸介质中的腐蚀试验(H Determination of resistance
to intergranular corrosion of stainless steels
- Part 1: Austenitic and ferritic-austenitic
(duplex) stainless steels - Corrosion test in
nitric acid medium by measurement of loss in
mass (Huey test)
ISO 3651-2-1998 不锈钢耐晶间腐蚀的测定 第2部分:铁素体、奥氏体和铁素体奥氏体(二重)不锈钢
在含硫酸介质中的腐蚀试验 Determination of resistance to
intergranular corrosion of stainless steels
- Part 2: Ferritic, austenitic and ferritic-austenitic
(duplex) stainless steels - Corrosion test in
media containing sulfuric acid
ISO 3763-1976 钢材 评定非金属夹杂物含量的宏观方法 Wrought steels;
Macroscopic methods for assessing the content
of non-metallic inclusions
ISO 3823-1-1997 牙科旋转器械 牙钻 第1部分:不锈钢牙钻和硬质合金牙钻
Dental rotary instruments - Burs - Part 1: Steel
and carbide burs
ISO 4144-2003 管道系统.符合ISO 7/1螺纹标准的不锈钢配件 Pipework
- Stainless steel fittings threaded in accordance
with ISO 7-1
ISO 4950-1 AMD 1-2003 高屈服强度扁钢材.第1部分:一般要求.修改件1
High yield strength flat steel products - Part
1: General requirements; Amendment 1
ISO 4950-1-1995 高屈服强度扁钢材.第1部分:一般要求 High yield
strength flat steel products - Part 1: General
requirements
ISO 4950-2 AMD 1-2003 高屈服强度扁钢材.第2部分:按正火或控制轧制条件提供的钢材.修改件1
High yield strength flat steel products - Part
2: Products supplied in the normalized or controlled
rolled condition; Amendment 1
ISO 4950-2-1995 高屈服强度扁钢材.第2部分:按正火或受控轧制条件提供的钢材
High yield strength flat steel products - Part
2: Products supplied in the normalized or controlled
rolled condition
ISO 4950-3 AMD 1-2003 高屈服强度扁钢材.第3部分:按热处理(淬火+回火)条件提供的钢材.修改件1
High yield strength flat steel products - Part
3: Products supplied in the heat-treated (quenched
+ tempered) condition; Amendment 1
ISO 4950-3-1995 高屈服强度扁钢材.第3部分:按热处理(淬火+回火)条件提供的钢材
High yield strength flat steel products - Part
3: Products supplied in the heat-treated (quenched
+ tempered) condition
ISO 5251-1981 不锈钢对焊配件 Stainless steel butt-welding
fittings
ISO 5832-1-1997 外科植入物 金属材料 第1部分:锻造不锈钢 Implants
for surgery - Metallic materials - Part 1: Wrought
stainless steel
ISO 5832-9-1992 外科植入物.金属材料.第9部分:锻造高氮不锈钢 Implants
for surgery - Metallic materials - Part 9: Wrought
high nitrogen stainless steel
ISO 6931-1-1994 弹簧不锈钢 第1部分:钢丝 Stainless steels
for springs - Part 1: Wire
ISO 6931-2-2005 弹簧不锈钢.第2部分:窄形带材 Stainless steels
for springs - Part 2: Narrow strip
ISO 7046-2-1990 十字槽沉头(通用头型)螺钉 产品等级A级 第2部分:性能等级钢8.8级、不锈钢和有色金属
Cross recessed countersunk flat head screws
(common head style); grade A; part 2: steel
of property class 8.8, stainless steel and non-ferrous
metals
ISO 7153-1 AMD 1-1999 外科器械 金属材料 第1部分:不锈钢 修改1
Surgical instruments - Metallic materials -
Part 1: Stainless steel; Amendment A1
ISO 7153-1-1991 外科器械 金属材料 第1部分:不锈钢 Surgical
instruments; metallic materials; part 1: stainless
steel
ISO 7598-1988 适于按照ISO 7/1车螺纹用不锈钢管 Stainless
steel tubes suitable for screwing in accordance
with ISO 7-1
ISO 8074-1985 航空航天 奥氏体不锈钢零件的表面处理 Aerospace;
Surface treatment of austenitic stainless steel
parts
ISO 8075-1985 航空航天 可淬硬的不锈钢零件表面处理 Aerospace;
Surface treatment of hardenable stainless steel
parts
ISO 8249-2000 焊接 奥氏体和成双铁素体奥氏体镍-铬(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定
Welding - Determination of Ferrite Number (FN)
in austenitic and duplex ferritic-austenitic
Cr-Ni stainless steel weld metals
ISO 8442-2-1997 与食品料有关的材料和物质.餐具和凹型餐具.第2部分:不锈钢和镀银餐具的要求
Materials and articles in contact with foodstuffs
- Cutlery and table holloware - Part 2: Requirements
for stainless steel and silver-plated cutlery
ISO 8501-2-1994 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部去除原有涂层后钢材的除锈等级
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Part 2: Preparation
grades of previously coated steel substrates
after localized removal of previous coatings
ISO 8501-3-2006 涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级
Preparation of steel substrates before application
of paints and related products - Visual assessment
of surface cleanliness - Part 3: Preparation
grades of welds, edges and other areas with
surface imperfections
ISO 8502-11-2006 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐浊度测定的现场方法
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 11:
Field method for the turbidimetric determination
of water-soluble sulfate
ISO 8502-2-2005 涂覆油漆和相关产品前钢材衬底的预处理.表面清洁度的评定试验.第2部分:洁净表面氯化物的测定
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 2:
Laboratory determination of chloride on cleaned
surfaces
ISO 8502-3-1992 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分:油漆前预处理后的钢材表面上的灰尘评定(压
Preparation of steel substrates before application
of paint and related products; tests for the
assessment of surface cleanliness; part 3: assessment
of dust on steel surfaces prepared for painting
(pressure-sensitive tape method)
ISO 8502-4-1993 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分:油覆前凝露可能性的评定导则
Preparation of steel substrates before application
of paint and related products; tests for the
assessment of surface cleanliness; part 4: Guidance
on the estimation of the probability of condensation
prior to paint application
ISO 8502-5-1998 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第5部分:涂装前钢材表面上氯化物测定(离子探测管法)
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 5:
Measurement of chloride on steel surfaces prepared
for painting (ion detection tube method)
ISO 8502-6-2006 油漆和相关产品用前钢材的预处理.表面清洁度的评定试验.第6部分:提取分析用可溶性杂质.Bresle法
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 6:
Extraction of soluble contaminants for analysis
- The Bresle method
ISO 8502-8-2001 涂装油漆和有关产品前钢材的预处理 表面清洁度评定试验 第8部分：现场水分折射测定方法
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 8:
Field method for the refractometric determination
of moisture
ISO 8502-9-1998 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导测定法
Preparation of steel substrates before application
of paints and related products - Tests for the
assessment of surface cleanliness - Part 9:
Field method for the conductometric determination
of water-soluble salts
ISO 8503-1-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性
第1部分:磨料喷射清理表面粗糙度的ISO评定 Preparation of steel
substrates before application of paints and
related products; surface roughness characteristics
of blast-cleaned steel substrates; part 1: specifications
and definitions for ISO surface profile comparators
for the assessment of abrasive blast-cleaned
surfaces
ISO 8503-2-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性
第2部分:磨料喷射清理表面的粗糙度定级方法 Preparation of steel substrates
before application of paints and related products;
surface roughness characteristics of blast-cleaned
steel substrates; part 2: method for the grading
of surface profile of abrasive blast-cleaned
steel; comparator procedure
ISO 8503-3-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性
第3部分:ISO表面轮廓比较仪的校准方法和表 Preparation of steel
substrates before application of paints and
related products; surface roughness characteristics
of blast-cleaned steel substrates; part 3: method
for the calibration of ISO surface profile comparators
and for the determination of surface profile;
focusing microscope procedure
ISO 8503-4-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性
第4部分:ISO表面轮廓比较仪的校准方法和表 Preparation of steel
substrates before application of paints and
related products; surface roughness characteristics
of blast-cleaned steel substrates; part 4: method
for the calibration of ISO surface profile comparators
and for the determination of surface profile;
stylus instrument procedure
ISO 8503-5-2003 涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法
Preparation of steel substrates before application
of paints and related products - Surface roughness
characteristics of blast-cleaned steel substrates
- Part 5: Replica tape method for the determination
of the surface profile
ISO 8504-1-2000 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分:总则
Preparation of steel substrates before application
of paints and related products - Surface preparation
methods - Part 1: General principles
ISO 8504-2-2000 涂装油漆和有关产品前钢材预处理.表面预处理方法.第2部分:磨料喷射清理
Preparation of steel substrates before application
of paints and related products - Surface preparation
methods - Part 2: Abrasive blast-cleaning
ISO 8504-3-1993 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗
Preparation of steel substrates before application
of paints and related products; surface preparation
methods; part 3: hand- and power-tool cleaning
ISO 8733-1997 不淬硬钢或奥氏体不锈钢内螺纹圆柱销 Parallel pins
with internal thread, of unhardened steel or
austenitic stainless steel
ISO 8734-1997 淬硬钢和马氏体不锈钢(定位销)圆柱销 Parallel pins,
of hardened steel and martensitic stainless
steel (Dowel pins)
ISO 8735-1997 淬硬钢和马氏体不锈钢内螺纹圆锥销 Parallel pins
with internal thread, of hardened steel and
martensitic stainless steel
ISO 9327-5-1999 压力用途的钢锻件和轧制或锻造的棒材 交货技术条件 第5部分:不锈钢
Steel forgings and rolled or forged bars for
pressure purposes - Technical delivery conditions
- Part 5: Stainless steels
ISO 9328-7-2004 压力用途扁钢产品.交货技术条件.第7部分:不锈钢 Steel
flat products for pressure purposes - Technical
delivery conditions - Part 7: Stainless steels
ISO 9329-4-1997 压力用途的无缝钢管 交货技术条件 第4部分:奥氏体不锈钢
Seamless steel tubes for pressure purposes -
Technical delivery conditions - Part 4: Austenitic
stainless steels
ISO 9330-6-1997 压力用途的焊接钢管 交货技术条件 第6部分:奥氏体不锈钢管的焊接长度
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 6: Longitudinally
welded austenitic stainless steel tubes
ISO 9444-2002 连续热轧不锈钢带材、板材和切割长度.尺寸和形状公差 Continuously
hot-rolled stainless steel strip, plate/sheet
and cut lengths - Tolerances on dimensions and
form
ISO 9445-2002 连续冷轧不锈钢窄带材、宽带材、板材和切割长度.尺寸和形状公差
Continuously cold-rolled stainless steel narrow
strip, wide strip, plate/sheet and cut lengths
- Tolerances on dimensions and form
ISO 9587-1999 金属和其他无机覆盖层 钢铁为减少氢脆危险的预处理 Metallic
and other inorganic coatings - Pretreatment
of iron or steel to reduce the risk of hydrogen
embrittlement
ISO 9588-1999 金属和其他无机覆盖层 钢铁为减少氢脆危险的的后涂覆处理 Metallic
and other inorganic coatings - Post-coating
treatments of iron or steel to reduce the risk
of hydrogen embrittlement
ISO 9626 AMD 1-2001 供制造医疗器械用的不锈钢针管 修改1 Stainless
steel needle tubing for the manufacture of medical
devices; Amendment 1
ISO 9626-1991 供制造医疗器械用的不锈钢针管 Stainless steel
needle tubing for manufacture of medical devices
ISO/TR 15235-2001 涂装油漆和有关产品前钢材的预处理 收集的有关溶水盐污染水平的影响的信息
Preparation of steel substrates before application
of paints and related products - Collected information
on the effect of levels of water-soluble salt
contamination
ISO/TR 17671-3-2002 焊接.金属材料焊接的推荐.第3部分:不锈钢的电弧焊接
Welding - Recommendations for welding of metallic
materials - Part 3: Arc welding of stainless
steels
ISO/TR 4558-1985 小艇 不锈钢丝绳用索具螺旋扣、叉头、连接销和眼孔的主要尺寸
Small craft; Rigging screws for stainless steel
wire rope; Principal dimensions for forks, connection
pins and eye-holes
ISO/TS 15510-2003 不锈钢.化学成分 Stainless steels
- Chemical composition
|
管件知识
