国内外阀标准 valve standards

国内外阀标准 valve standards

美国阀标准(ANSI valve standards)

--------------------------------------------------------------------------------
编号 中文名称 英文名称
ANSI A112.14.1-1975 回水逆止阀 Backwater valves
ANSI B93.112M-1988 液压气动阀内部漏泄特性的测定方法 Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics
ANSI B93.77M-1987 液压气动缸传动安装阀安装表面的标准尺寸 Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces
ANSI B93.9M-1969 流体动力阀上标记电导线和端口的符号 Symbols for Marking Electrical Leads and Ports on Fluid Power Valves
ANSI T1.330-1997 电信.电信环境用的阀调的铅酸电池 Telecommunications - Valve-regulated lead-acid batteries used in the telecommunications environment
ANSI Z21.15-1997 煤气设备、设备连接阀和软管终端阀的手动煤气阀(同 CGA 9.1) Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1)
ANSI Z21.15a-2001 煤气设备、设备连接阀和软管终端阀的手动煤气阀(同 CGA 9.1a) Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1a)
ANSI Z21.21-2005 燃气器具用自动阀 Automatic Valves for Gas Appliances (same as CSA 6.5)
ANSI Z21.21b-2004 燃气器具用自动阀 Automatic Valves for Gas Appliances (same as CSA 6.5b)
ANSI Z21.22-1999 热水供给系统用安全阀(与CSA 4.4-1998相同) Relief Valves for Hot Water Supply Systems (same as CSA 4.4-1998)
ANSI Z21.22a Addenda-1990 热水供给系统的安全阀和气体自动关闭装置.补充件 Relief valves and automatic gas shutoff devices for hot water supply systems; Addenda
ANSI Z21.22a-1999 减压阀和真空截止阀 Pressure Relief Valves and Vacuum Relief Valves
ANSI Z21.22b-2001 热水供应系统用截止阀 Relief Valves for Hot Water Supply Systems (same as CSA 4.4b)
ANSI Z21.79-1997 燃气器具冷凝阀 Gas Appliances Sediment Traps
ANSI Z21.79a-2005 燃气器具除垢阀 Gas Appliance Sediment Traps (Same as CGA 6.21a)
ANSI/API 14A-2005 井下安全阀设备的规范 Specification for Subsurface Safety Valve Equipment
ANSI/API 553-1999 炼油控制阀 Refinery Control Valve
ANSI/API 574-1998 管、阀门及配件的检验 Inspection of Piping, Tubing, Valves, and Fittings
ANSI/API 599-2002 金属塞阀.法兰和焊接端 Metal Plug Valves - Flanged and Welding Ends
ANSI/API 603-2001 150级,铸铁,耐腐蚀,法兰端闸阀 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
ANSI/API 608-2002 对焊和法兰端金属球阀 Metal Ball Valves - Flanged and Butt-Welding Ends
ANSI/API 621-2001 金属闸阀、球阀和止回阀的重新调整 Reconditioning of Metallic Gate, Globe, and Check Valves
ANSI/API Std.600-2001 石油和天然气工业用螺栓接合钢制帽状阀门 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
ANSI/API STD600-2001 石油和天然气工业用栓紧帽状钢门阀 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
ANSI/ARI 750-2001 制冷剂恒温膨胀阀 Thermostatic Refrigerant Expansion Valves
ANSI/ARI 770-1994 制冷压力调节阀 Refrigerant Pressure Regulating Valves
ANSI/ASHRAE 158.1-2004 制冷电磁阀的容量试验方法 Methods of Testing Capacity of Refrigerant Solenoid Valves
ANSI/ASHRAE 17-1998 温度调节用制冷安全阀容量分级测试方法 Capacity Rating of Thermostatic Refrigerant Expansion Valves, Method of Testing for
ANSI/ASME A112.14.1-2003 回水阀 Backwater Valves
ANSI/ASME A112.18.7M-1999 预防内部回流的立式浴缸/淋浴转换阀 Deck Mounted Bath/Shower Transfer Valves with Internal Backflow Prevention
ANSI/ASME A112.4.1-1993 热水器安全阀排水管 Water Heater Relief Valve Drain Tubes
ANSI/ASME A112.4.14-2004 卫生管道系统中使用的手动直角转弯截止阀 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
ANSI/ASME B16.10-2003 阀门的面对面及端对端尺寸 Face-to-Face and End-to-End Dimensions of Valves
ANSI/ASME B16.33-2002 125表压及以下的气体管道系统中使用的手动金属气体阀 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig
ANSI/ASME B16.34-2004 阀门.带法兰、有螺纹和焊接端部 Valves - Flanged, Threaded and Welding End
ANSI/ASME B16.38-1985 气分配系统用大型手动金属阀(NPS 2 1/2到12,最大压力为125psig) Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum)
ANSI/ASME B16.40-2002 气体分配系统中手动热塑气体截流阀及阀门 Gas Shut-Offs and Valves in Gas Distribution Systems, Manually Operated Thermoplastic
ANSI/ASME B16.44-2002 家用管道系统中使用的手工操作的金属气体阀门 Manually Operated Metallic Gas Valves for Use in House Piping Systems
ANSI/ASME B16.44a-1997 家庭管道系统中用手动金属气阀 Manually Operated Metallic Gas Valves for Use in House Piping Systems
ANSI/ASSE 1003-2001 水压减压阀的性能要求 Performance Requirements for Water Pressure Reducing Valves
ANSI/ASSE 1016-2005 单个淋浴装置和浴盆/淋浴组合中淋浴装置用自动补偿阀门的性能要求 Performance Requirements for Automatic Compensating Valves for Individual Showers and Showers in Tub/Shower Combinations
ANSI/ASSE 1017-1999 主要用于家庭的温控混合阀性能要求 Performance Requirements for Temperature Actuated Mixing Valves for Primary Domestic Use
ANSI/ASSE 1018-2002 分离器密封起动阀.轻便供水装置 Trap Seal Primer Valves - Potable Water Supplied
ANSI/ASSE 1024-2004 双重止回阀型防回流装置 Dual Check Valve Type Backflow Preventers
ANSI/ASSE 1044-2002 分离器密封起动阀.排水装置类型和电子设计类型 Trap Seal Primer Devices - Drainage Types and Electronic Design Types
ANSI/ASSE 1051-1998 污水管道系统用气体导入阀 Air Admittance Valves for Plumbing Drainage Systems
ANSI/ASSE 1056-2002 倒虹吸回流真空关闭阀 Back Siphonage Backflow Vacuum Breakers
ANSI/ASSE 1069-2005 自动温度控制混合阀门的性能要求 Performance Requirements for Automatic Temperature Control Mixing Valves
ANSI/ASTM A182/A 182M-2001 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ANSI/ASTM B834-1996 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件规范 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
ANSI/ASTM D2713-2001 测定丙烷干燥性的试验方法(阀门冷冻法) Test Method for Dryness of Propane (Valve Freeze Method)
ANSI/ASTM D5500-1999 进气阀沉淀物中汽车点火无铅机油评估测试方法(05.03) Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit (05.03)
ANSI/ASTM D6201-2004 进油阀沉积物形成用无铅火花点火发动机燃料的功率计评价用试验方法 Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation
ANSI/ASTM E1008-1997 地热和其他高温压力设备用阀身压力释放装置的装配、检测和维护惯例 Practice for Installation, Inspection, and Maintenance of Value Body Pressure Relief Methods for Geothermal and Other High-Temperature Applications
ANSI/ASTM F1020-1997 船用管路截流阀惯例 Practice for Line Blind Valves for Marine Applications
ANSI/ASTM F1030-1986 阀门操作人员的实施规程 Practice for Selection of Valve Operators
ANSI/ASTM F1098-1987 蝶阀-NPS 2 到 24包封尺寸的规范 Specification for Envelope Dimensions for Butterfly Valves - NPS 2 to 24
ANSI/ASTM F1139-1988 疏水阀和排水管的规范 Specification for Steam Traps and Drains
ANSI/ASTM F1271-1997 船上储罐液体过压保护装置溢流阀规范 Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ANSI/ASTM F1370-1992 舰船用水系统减压阀的规范 Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ANSI/ASTM F1508-1997 用于蒸汽、气体和液体设备的角型减压阀规范 Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
ANSI/ASTM F1565-2000 蒸汽供应减压阀规范 Specification for Pressure-Reducing Valves for Steam Service
ANSI/ASTM F1792-1997 气态氧供气阀门特殊要求规范 Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ANSI/ASTM F1793-1997 空气或氮气供应截流阀(亦称流量限制阀()规范 Specification for Automatic Shut-Off Valves (also known as Excess Flow Valves EFV) for Air or Nitrogen Service
ANSI/ASTM F1794-1997 气体(除氧气)和液压系统手动球形阀门规范 Specification for Hand-Operated Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
ANSI/ASTM F1795-2000 空气或氮气系统减压阀规范 Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
ANSI/ASTM F1802-2004 溢流阀性能试验的试验方法 Test Method for Performance Testing of Excess Flow Valves
ANSI/ASTM F1970-2005 聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统专用工程配件、附件或阀门的规范 Specification for Special Engineered Fittings, Appurtenances or Valves for Use in Poly(Vinyl Chloride) (PVC) or Chlorinated Poly(Vinyl Chloride) (CPVC) Systems
ANSI/ASTM F1985-1999 气动球形控制阀规范 Specification for Pneumatic-Operated, Globe-Style, Control Valves
ANSI/ASTM F2138-2001 天然气设备溢流阀规范 Specification for Excess Flow Valves for Natural Gas Service
ANSI/ASTM F2324-2003 预清洗喷雾阀的试验方法 Test Method for Pre-rinse Spray Valves
ANSI/ASTM F885-1997 美国标准直管螺纹1/4至2英寸青铜球阀阀壳尺寸规范 Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
ANSI/ASTM F992-1997 阀门标识牌规范 Specification for Valve Label Plates
ANSI/ASTM F993-1997 阀门锁紧装置规范 Specification for Valve Locking Devices
ANSI/AWWA C500-2002 排水和污水系统闸门阀 Gate Valves for Water and Sewage Systems
ANSI/AWWA C504-2006 橡胶垫密封蝶阀 Rubber-Seated Butterfly Valves
ANSI/AWWA C507-2005 从6英寸(150mm)到48英寸(1200mm)的球阀 Ball Valves 6 in (150 mm) through 48 in (1200 mm)
ANSI/AWWA C508-2001 2in(50mm)-24in(600mm)NPS水厂设备摆动止回阀 Swing-Check Valves for Waterworks Service, 2 in (50 mm) through 24 in (600 mm) NPS
ANSI/AWWA C510-1997 双止回阀防回流组件 Double Check Valve Backflow-Prevention Assembly
ANSI/AWWA C512-2004 给水装置用放气阀、空气/真空和混合空气阀 Air Release, Air/Vacuum, and Combination Air Valves for Water Works Service
ANSI/AWWA C517-2005 弹性座式铸铁偏心塞阀 Resilient-Seated Cast Iron Eccentric Plug Valves
ANSI/AWWA C540-2002 阀门和水闸用作动装置 Power-Actuating Devices for Valves and Sluice Gates
ANSI/AWWA C550-2005 阀门和给水栓用防护性内部涂层 Protective Interior Coatings for Valves and Hydrants
ANSI/AWWA C800-2005 地下管道阀门和配件 Underground Service Line Valves and Fittings
ANSI/FCI 69-1-1989 疏水阀的压力额定值标准 Pressure Rating Standard for Steam Traps
ANSI/FCI 91-1-1997 控制阀门密性封的鉴定标准 Standard for Qualification of Control Valve Stem Seals
ANSI/IAS NGV4.6-1999 天然气分装系统手动控制阀 Manually Operated Valves for Natural Gas Dispensing Systems
ANSI/IAS NGV4.7-1999 天然气分装系统用自动压力控制阀 Automatic Pressure-Operated Valves for Natural Gas Dispensing Systems
ANSI/IEEE 1187-2002 固定用途的阀调节铅酸蓄电池的安装设计和安装的推荐实施规程 Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications
ANSI/IEEE 1189-1996 固定设备用的阀调节铅酸(VRLA)蓄电池的选择指南 Guide for the Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Application
ANSI/IEEE 1290-1996 核电站电动控制阀门电机的应用、保护、控制和试验指南 Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
ANSI/IEEE 382-1996 核电厂用带安全相关功能的电力操作阀组件的执行机构的合格鉴定 Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power-Plants, Qualification of
ANSI/IEEE 857-1996 高压直流可控硅换流阀试验程序的推荐实施规程 Recommended Practice for Test Procedures for High Voltage Direct Current Thyristor Valves
ANSI/IEEE C62.32-2004 气隙电涌防护装置(阀门和冲出式装置除外)的低压试验规范 Air Gap Surge-Protective Devices (Excluding Valve and Expulsion-Type Devices), Test Specifications for the Low-Voltage
ANSI/IIAR 3-2005 氨制冷机阀门 Ammonia Refrigeration Valves
ANSI/ISA 75.01.01-2002 尺寸控制阀用流量方程式 Flow Equations for Sizing Control Valves
ANSI/ISA 75.02-1996 控制阀能力试验程序 Control Valve Capacity Test Procedures
ANSI/ISA 75.04-1995 无凸缘控制阀的端面间尺寸(ANSI类型150、300和600) Face-to-Face Dimensions of Flangeless Control Valves (ANSI Classes 150, 300, and 600)
ANSI/ISA 75.05.01-2001 控制阀术语 Control Valve Terminology
ANSI/ISA 75.08-1999 安装好的凸缘夹具或夹紧阀的端面间尺寸 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
ANSI/ISA 75.08.01-2002 整体式带凸缘的球型(类型125、150、250、300和600)控制阀体的端面间尺寸 Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)
ANSI/ISA 75.08.02-2003 无凸缘的控制阀端面间的尺寸(级别150、300和600) Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600)
ANSI/ISA 75.08.03-2001 承插焊接端和螺旋端球型控制阀的端面间尺寸(ANSI类型150、300、600、900、1500和2500) Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA 75.08.04-2001 对焊端球型控制阀的端面尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA 75.08.05-2002 端面对焊球型(类型150、300、600、900、1500和2500)控制阀的端面间尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA 75.08.06-2002 带凸缘的球型(类型900、1500和2500)控制阀体的面对面尺寸 Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)
ANSI/ISA 75.08.07-2001 可分离的凸缘球型控制阀的端面间尺寸(类型150、300和600) Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
ANSI/ISA 75.08.09-2005 滑动杆无凸缘控制阀的端面间尺寸(类型150、300和600) Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600)
ANSI/ISA 75.11.01-1985 控制阀的固有流量特征和可调范围 Control Valves, Inherent Flow Characteristic and Rangeability of
ANSI/ISA 75.19.01-2001 控制阀水压试验 Hydrostatic Testing of Control Valves
ANSI/ISA 75.22-1999 凸缘球型角度控制阀身的端面至中心间尺寸 Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
ANSI/ISA 75.25.01-2001 步进输入控制阀反应测量试验程序 Test Procedures for Control Valve Response Measurement from Step Inputs
ANSI/ISA S75.02-1996 控制阀容量测试程序 Control Valve Capacity Test Procedures
ANSI/ISA S75.04-1995 无法兰控制阀端间尺寸(ANSI 150,300和600级) Face-to-Face Dimensions of Flangeless Control Valves (ANSI Classes 150, 300, and 600)
ANSI/ISA S75.08-1985 法兰夹具或夹紧阀的安装面与面间尺寸 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
ANSI/ISA S75.08.03-2001 承插焊接端头和螺旋端头球状控制阀的面到面尺寸 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA S75.08.04-2001 对焊端头球状控制阀的面到面尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA S75.08.07-2001 独立法兰球状控制阀的面到面尺寸 Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
ANSI/ISA S75.11-1985 控制阀内在流量特性和幅度变化量 Control Valves, Inherent Flow Characteristic and Rangeability of
ANSI/ISA S75.14-1984 对焊端球型控制阀端间尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA S75.19.01-2001 控制阀静水压试验 Hydrostatic Testing of Control Valves
ANSI/ISA S75.22-1992 法兰球式角度控制阀体的端面至中心尺寸 Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
ANSI/ISA S93.00.01-1999 手动和自动关闭阀门外泄露评估的标准方法 Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves
ANSI/ISA TR75.25.02-2000 阶式信号输入控制阀反应测量 Control Valve Response Measurement from Step Inputs
ANSI/NFPA 1964-2003 喷嘴(关闭阀和端头) Spray Nozzles (Shutoff and Tip)
ANSI/SAE J1118-1993 摩托车制动系统试验程序用液压阀 Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
ANSI/SAE J1409-1998 空气制动阀试验程序 Air Brake Valves Test Procedure
ANSI/SAE J1410-1998 空气制动阀.性能要求 Air Brake Valve - Performance Requirements
ANSI/SAE J351-1994 油回火碳素钢阀、弹簧钢丝和弹簧 Oil Tempered Carbon Steel Valve, Spring Quality Wire, and Springs
ANSI/UL 1002-1996 分类危险场所用电动阀 Electrically Operated Valves for Use in Hazardous (Classified) Locations
ANSI/UL 125-2001 无水氨和液化气阀门的安全标准（安全阀除外） Standard for Safety for Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)
ANSI/UL 132-2002 无水氨气和液化石油气的安全阀的安全标准 Standard for Safety for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
ANSI/UL 144-2001 液化石油气压力调节阀的安全标准 Standard for Safety for Pressure-Regulating Valves for LP Gas
ANSI/UL 1468-2004 消防设施用直接作用的降压和控压阀 Direct-Acting Pressure-Reducing and Pressure-Control Valves for Fire Protection Service
ANSI/UL 1478-2004 消防水泵减压阀 Fire Pump Relief Valves
ANSI/UL 1486-2003 防火设施用干管阀快速打开装置的安全标准 Standard for Safety for Quick Opening Devices for Dry Pipe Valves for Fire Protection Service
ANSI/UL 1739-2004 消防用液压控制阀 Pilot-Operated Pressure-Control Valves for Fire-Protection Service
ANSI/UL 193-2003 防火设施用报警阀门 Alarm Valves for Fire-Protection Service
ANSI/UL 312-2003 防火设施用止回阀 Check Valves for Fire-Protection Service
ANSI/UL 668-2004 消防设备用水带阀 Hose Valves for Fire Protection Service
ANSI/UL 753-1996 消防装置用自动供水控制阀的警报附件 Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service
ANSI/UL 842-1999 易燃液用阀门 Valves for Flammable Fluids
ASME A112.14.1-1975 回水阀门 (Backwater valves)
ASME A112.18.7-1999 装盖板的带整体回流保护的浴室/淋浴转换阀 (Deck mounted bath/shower transfer valves with integral backflow protection)
ASME A112.4.1-1993 热水器减压阀排水管 (Water heater relief valve drain tubes)
ASME B 16.40 Erratum-2003 燃气分配系统中的手动热塑性气体开关和阀门.对ASME B 16.40-2002的勘误 (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems; Erratum to ASME B16.40-2002)
ASME B16.10-2000 阀的面对面及端对端尺寸 (Face-to-face and end-to-end dimensions of valves)
ASME B16.33-2002 125表压及以下的气体管道系统中使用的手动金属气阀 (Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2))
ASME B16.34-1996 阀门.法兰、螺纹和焊接端 (Valves - Flanged, threaded, and welding end)
ASME B16.34a Addenda-1998 带螺纹的法兰式阀门和焊接端.附录 (Valves - Flanged, threaded, and welding end; Addenda)
ASME B16.38-1985 气体分配系统中用手动大型金属阀门(NPS 2 1/2到12,其最大允许表压不超过125巴) (Large metallic valves for gas distribution (manually operated, NPS 2 1/2 to 12, 125 psig maximum))
ASME B16.40-2002 气体分配系统中的手动热塑性气体截流阀及阀门 (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems)
ASME B40.6-1994 限压阀 (Pressure limiter valves)
ASME N278.1-1975 与安全相关的自动和机动阀门.功能规范标准 (Self-operated and power-operated safety-related valves - Functional specification standard)
ASME PTC 25.3-1988 安全和减压阀 (Safety and relief valves)
ASME Y32.2.3-1949 管道配件,阀门,管道配置用图形符号 (Graphical symbols for pipe fittings, valves and piping)
ASTM A 126-2004 阀门、法兰和管配件用灰铁铸件的标准规范 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
ASTM A 182/A 182Ma-2005 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件的标准规范 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 230/A 230M-2005 阀簧级油回火碳素钢丝的标准规范 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
ASTM A 232/A 232M-2005 阀簧级铬矾合金钢的标准规范 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM A 338-1984 铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件 Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C)
ASTM A 522/A 522M-2001 低温设备用锻制或轧制含镍8%和9%的合金钢法兰、配件、阀门和零件的标准规范 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A 694/A 694M-2003 高压传输设备用管法兰、配件、阀门及零件用碳素钢及合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM A 877/A 877M-2005 阀簧级铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
ASTM A 878/A 878M-2005 阀簧级改进的铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
ASTM A 961/A 961M-2005 管道设施用钢法兰、锻件、阀门和部件的通用要求的标准规范 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
ASTM A 988/A 988M-2005 高温设备用热等静压压制的不锈钢法兰、配件、阀门和部件的标准规范 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A 989/A 989M-2005 高温设备用热等静压压制的合金钢法兰、配件、阀门和部件的标准规范 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM B 61-2002 蒸气或阀门青铜铸件的标准规范 Standard Specification for Steam or Valve Bronze Castings
ASTM B 763-2004 阀门用铜合金砂型铸件标准规范 Standard Specification for Copper Alloy Sand Castings for Valve Applications
ASTM B 834-1995 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件标准规范 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
ASTM C 1129-1989 通过给凸面阀门及法兰增加热绝缘材料评估蓄热量的标准实施规程 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
ASTM D 2512-1995 材料与液氧兼容性标准试验方法(冲击敏感阀与可靠性技术) Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D 2713-1991 丙烷干燥性的标准试验方法(阀冻结法) Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 3076-2000 气溶胶容器外部卷合阀的有效卷合度的标准试验方法 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D 3089-1997 测量气溶胶阀填料斜管A-D尺寸的标准操作规程 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 5500-1998 进液阀门沉积形成的不含铅自动火花点火引擎燃料的车辆评价标准试验方法 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM D 6201-2004 进油阀沉积物形成用火花点燃式发动机无铅燃料的功率计评定标准试验方法 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM E 1008-2003 地热和其它高温液体设备用减压阀体的安装、检验及维修用标准实施规范 Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
ASTM E 675-2002 可互换的圆锥接地旋塞阀和栓塞的标准规范 Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
ASTM E 911-1998 有聚四氟乙烯(PTFE)插头的玻璃管旋塞阀标准规范 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM F 1020-1986 船用暗线阀 Standard Specification for Line-Blind Valves for Marine Applications
ASTM F 1030-1986 阀门操作器的选择 Standard Practice for Selection of Valve Operators
ASTM F 1094-1987 用直接加压分接抽样阀和用预先消毒塑料包法对电子和微电子器件加工用水微生物监测的测试方法 Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM F 1098-1987 管子公称尺寸2-24号用蝶阀外壳尺寸 Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
ASTM F 1139-1988 蒸汽疏水阀和排水管 Standard Specification for Steam Traps and Drains
ASTM F 1271-1990 船上储罐液体过压保护装置用溢流阀 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F 1370-1992 船上给水系统用减压阀 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ASTM F 1373-1993 气体分配系统组件用自动阀的周期寿命测定的标准试验方法 Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F 1394-1992 测定从气体分配系统阀门产生的粒子成分的标准试验方法 Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM F 1431-1992 柴油机排气阻水阀 Standard Specification for Water Trap for Diesel Exhaust
ASTM F 1508-1996 用于蒸汽、气体和液体设备的角型减压阀标准规范 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
ASTM F 1565-2000 蒸汽设备用减压阀标准规范 Standard Specification for Pressure-Reducing Valves for Steam Service
ASTM F 1792-1997 用于氧气服务的阀门的特殊要求的标准规范 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM F 1793-1997 空气或氮服务用自动截流阀(也称为溢流阀)的标准规范 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
ASTM F 1794-1997 手动、球型阀气体(除氧气)和液压系统标准规范 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
ASTM F 1795-2000 空气或氮气系统用减压阀标准规范 Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
ASTM F 1802-2004 溢流阀性能测试标准试验方法 Standard Test Method for Performance Testing of Excess Flow Valves
ASTM F 1970-2005 聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统中使用的专用工程配件、附件或阀门的标准规范 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
ASTM F 1985-1999 气动球形控制阀标准规范 Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
ASTM F 2138-2001 天然气设备用溢流阀标准规范 Standard Specification for Excess Flow Valves for Natural Gas Service
ASTM F 2215-2005 轴承、阀门和轴承设备用黑色和有色金属滚珠轴承标准规范 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
ASTM F 2324-2003 预清洗喷雾器阀用标准试验方法 Standard Test Method for Prerinse Spray Valves
ASTM F 885-1984 美国标准直管螺纹1/4至2英寸青铜球型阀的阀壳尺寸标准规范 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
ASTM F 992-1986 阀门标识牌 Standard Specification for Valve Label Plates
ASTM F 993-1986 阀门锁紧装置标准规范 Standard Specification for Valve Locking Devices
IEEE 1187-2002 固定设备用的阀调节铅酸蓄电池的安装设计和安装的推荐性实施规程 (Recommended practice for installation design and installation of valve-regulated lead-acid storage batteries for stationary applications)
IEEE 1188-1996 发电站用阀调节铅酸(VRLA)蓄电池组的保养、试验和更新的推荐规程 (Recommended practice for maintenance, testing, and replacement of valve-regulated lead-acid (VRLA) batteries for stationary applications)
IEEE 1189-1996 固定设备用调节阀铅酸(VRLA)蓄电池的选择指南 (Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications)
IEEE 1290-1996 核电站中电动阀门(MOV)的电机使用,保护,控制和试验的指南 (Guide for motor operated valve (MOV) motor application, protection, control, and testing in nuclear power generating stations)
IEEE 382-1996 对核电站用有安全功能的电动阀组驱动器的鉴定 (Qualification of actuators for power-operated valve assemblies with safety-related functions for nuclear power plants)
IEEE 857-1996 高压直流半导体闸流管阀试验程序推荐规程 (Recommended practice for test procedures for high-voltage direct-current thyristor valves)
UL 1002-1994 危险(分类的)场所用电动阀门 (Electrically operated valves for use in hazardous (classified) locations )
UL 1091-1994 消防装置用蝶阀 (Butterfly valves for fire-protection service )
UL 1106-1998 船舶用可燃液体人工操作断流阀 (Marine manually operated shutoff valves for flammable liquids )
UL 1121-1998 船用贯穿船身的配件和舷侧进水阀 (Marine through-hull fittings and sea-valves )
UL 125-1997 无水液氨和液化石油气阀门(不包括安全卸荷阀) (Valves for anhydrous ammonia and LP-gas (other than safety relief) )
UL 132-1997 无水液体石油气用安全卸荷阀门 (Safety relief valves for anhydrous ammonia and LP-gas )
UL 144-1999 液化石油气调节阀 (LP-gas regulators )
UL 1468-1995 防火设备用直接控制的减压阀和压力控制阀 (Direct acting pressure reducing and pressure restricting valves )
UL 1469-1995 回流专用止回阀的阀身强度和液压损失率检验 (Strength of body and hydraulic pressure loss testing of backflow special check valves )
UL 1478-1995 消防泵减压阀 (Fire pumps relief valves )
UL 1486-2004 消防设备用干管阀门的快速开启装置 (Quick opening devices for dry pipe valves for fire protection service )
UL 17-1994 燃油设备用通风孔或烟囱连接器调节阀门 (Vent or chimney connector dampers for oil-fired appliances )
UL 1726-2001 储水系统用自动排水阀 (Automatic drain valves for standpipe systems )
UL 1739-1994 消防设备用液压控制的压力控制阀 (Pilot-operated pressure-control valves for fire-protection service )
UL 1769-2003 气瓶阀 (Cylinder valves )
UL 193-2004 防火用报警阀门 (Alarm valves for fire-protection service )
UL 260-1994 防火用蒸汽收集器和和集水阀门 (Dry pipe and deluge valves for fire-protection service )
UL 262-2004 防火用闸阀 (Gate valves for fire-protection service )
UL 312--2004 防火用切断阀 (Check valves for fire-protection service )
UL 352-1997 恒定液面油阀门 (Constant-level oil valves )
UL 429-1999 电动控制阀 (Electrically operated valves )
UL 668-1995 消防用软管阀门 (Hose valves for fire-protection service )
UL 753-1995 消防装置用自动供水控制阀报警附件 (Alarm accessories for automatic water-supply control valves for fire protection service )
UL 842-1997 可燃流体用阀门 (Valves for flammable fluids )
英国阀标准(BS valve standards)

--------------------------------------------------------------------------------
编号 中文名称 英文名称
BS 10-1962 管子、阀门和配件用法兰和螺栓连接规范 Specification for flanges and bolting for pipes, valves, and fittings
BS 1010-2-1973 供水设备(旋压式)用放水旋阀和截止阀规范.第2部分:放水旋阀和地面上截止阀 Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves
BS 1212-1-1990 浮子阀.第1部分:活塞式浮子阀(铜合金阀体)(不含浮子)规范 Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212-2-1990 浮子阀.第2部分:隔膜式浮子阀(铜合金阀体)(不含浮子)规范 Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
BS 1212-3-1990 浮子阀.第3部分:仅供冷水用隔膜型塑料体浮子操作阀(不包括浮子) Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
BS 1212-4-1991 浮子阀.第4部分:厕所冲水箱用小型浮子阀规范(包含浮子) Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats)
BS 1552-1995 压力可达200毫巴家庭用一类、二类和三类燃气敞口底部锥形旋塞阀规范 Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
BS 1560-3.2-1990 管子、阀门和接头(规定等级)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第2节:铸铁法兰规范 Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges
BS 1655-1950 过程控制工业用法兰连接自动控制阀(面至面尺寸)规范 Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
BS 1868-1975 石油、石化及联合企业用钢制单向阀(有法兰及对焊端)规范 Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1873-1975 石油、石化及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范 Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1968-1953 球阀用浮球(铜)规范 Specification for floats for ballvalves (copper)
BS 2456-1990 冷水设备用浮子操作阀的浮子(塑料制品)规范 Specification for floats (plastics) for float operated valves for cold water services
BS 2767-1991 散热器用手动控制铜合金阀的规范 Specification for manually operated copper alloy valves for radiators
BS 2782-11 Method 1108A-1989 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1108A:管界面限定碰撞率 Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes
BS 2782-11 Method 1109A-1989 塑料试验方法.第11部分:热塑性塑料、接头和阀门.试验方法1109A:非承压聚乙烯管和接头耐坏境应力开裂性 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
BS 2782-11 Method 1110-1989 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1110:非承压聚氯乙烯槽形管哑铃状试样的抗拉性能 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications
BS 2782-11 Method 1121B-1997 塑料的试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121B:额定外部直径和额定压力.米 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series
BS 2782-11 Method 1121C-1997 塑料试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121C:额定外部直径和额定压力.英尺 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series
BS 2782-11 Method 1121H-1996 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1121H:非承压液体输送热塑性塑料管.管头损失计算 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses
BS 2782-11 Method 1127P-1997 塑料试验方法.第11部分:热塑管,接头和阀门.液体输送用热塑材管.试验方法1127P:抗内压力.试验方法 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes, for the conveyance of fluids - Resistance to internal pressure - Test method
BS 2782-11 Method 1150B-1998 塑料试验方法.第11部分:热塑管,接头和阀门.塑料管道和配件.试验方法1150D:对接熔融法聚乙烯(PE)管/管或管道 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS 2782-11 Method 1150E-1997 塑料试验方法.第11部分:热塑性塑料管,接头和阀门.试验方法1150E:塑料管和配件.聚乙烯管和电熔融接头间试件 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS 2S 111-1964 飞机材料规范.镍铬钨阀门钢 Specification for aircraft material - Nickel-chromium-tungsten valve steel
BS 341-3-2002 可运输气体容器的阀门.阀门出口接头 Transportable gas container valves - Valve outlet connections
BS 341-4-2004 可运输气体容器的阀门.减压装置 Transportable gas container valves - Pressure relief devices
BS 3457-1973 水龙头与截止阀座垫圈材料规范 Specification for materials for water tap and stopvalve seat washers
BS 3727-1-1966 电子管和电子阀用镍的分析方法.第1部分:铝含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method)
BS 3727-10-1964 电子管和电子阀用镍的分析方法.第10部分:0.020-0.25％硅含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method)
BS 3727-11-1965 电子管和电子阀用镍的分析方法.第11部分:0.001-0.020％硅含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method)
BS 3727-12-1970 电子管和电子阀用镍的分析方法.硫含量测定(燃烧法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method)
BS 3727-13-1965 电子管和电子阀用镍的分析方法.第13部分:钛含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method)
BS 3727-14-1964 电子管和电子阀用镍的分析方法.第14部分:钨含量测定(重量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method)
BS 3727-15-1968 电子管和电子阀用镍的分析方法.第15部分:锌含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method)
BS 3727-16-1966 电子管和电子阀用镍的分析方法.第16部分:化合镁和游离镁含量测定 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of combined and free magnesium
BS 3727-2-1968 电子管和电子阀用镍的分析方法.第2部分:硼含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method)
BS 3727-20-1966 电子管和电子阀用镍的分析方法.第20部分:光谱法 Methods for the analysis of nickel for use in electronic tubes and valves - Spectrographic method
BS 3727-21-1966 电子管和电子阀用镍的分析方法.第21部分:镁含量测定(原子吸收法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method)
BS 3727-3-1966 电子管和电子阀用镍的分析方法.第3部分:碳含量测定 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of carbon
BS 3727-4-1964 电子管和电子阀用镍的分析方法.第4部分:铬含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method)
BS 3727-5-1964 电子管和电子阀用镍的分析方法.第5部分:钴含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method)
BS 3727-6-1964 电子管和电子阀用镍的分析方法.第6部分:铜含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method)
BS 3727-7-1964 电子管和电子阀用镍的分析方法.第7部分:铁含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method)
BS 3727-8-1964 电子管和电子阀用镍的分析方法.第8部分:锰含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method)
BS 3727-9-1967 电子管和电子阀用镍的分析方法.第9部分:镁含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method)
BS 4062-2-1990 液压动力系统阀门.第2部分:性能测定方法 Valves for hydraulic fluid power systems - Methods for determining performance
BS 4151-1967 输入信号为 3至15磅/平方英寸(压力计)的气动阀定位器的评定方法 Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge)
BS 4319-1-1968 电子管和电子阀(包括微波器件)电气特性测量方法.第1部分:测量等效输入和输出导纳的基本条件 Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances
BS 5041-1-1987 消防栓系统设备.第1部分:湿式水嘴接地阀规范 Fire hydrant systems equipment - Specification for landing valves for wet risers
BS 5041-2-1987 消防栓系统设备.第2部分:干式水嘴接地阀规范 Fire hydrant systems equipment - Specification for landing valves for dry risers
BS 5041-4-1975 消防栓系统设备.第4部分:干式水嘴用接地阀箱规范 Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers
BS 5158-1989 铸铁旋塞阀规范 Specification for cast iron plug valves
BS 5159-1974 通用铸铁和碳钢球阀规范 Specification for cast iron and carbon steel ball valves for general purposes
BS 5163-1-2004 水厂用阀.主要键操作的铸铁闸阀.操作规范 Valves for waterworks purposes - Predominantly key-operated cast iron gate valves - Code of practice
BS 5163-2-2004 水厂用阀.隔离阀和相关控水设备用船首柱冠板.规范 Valves for waterworks purposes - Stem caps for use on isolating valves and associated water control apparatus - Specification
BS 5353-1989 钢塞阀规范 Specification for steel plug valves
BS 5433-1976 供水用地下闸阀规范 Specification for underground stopvalves for water services
BS 5672-1991 往复式内燃机汽缸头的汽缸和阀旋转方向标示和左、右单列发动机定义的规范 Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
BS 5793-4-1987 工业过程控制阀.第4部分:检验和例行试验规范 Industrial-process control valves - Specification for inspection and routine testing
BS 5944-4-1984 液压动力系统和部件空气噪音测量.第4部分:流量和压力控制阀声功率级测定方法 Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure
BS 5998-1983 钢阀铸件的质量级规范 Specification for quality levels for steel valve castings
BS 6023-1980 自动疏水阀的技术术语词汇 Glossary of technical terms for automatic steam traps
BS 6282-1-1982 防止回流水污染用带动件装置.第1部分:公称尺寸小于等于DN54的单向阀规范 Devices with moving parts for the prevention of contamination of water by backflow - Specification for check valves of nominal size up to and including DN 54
BS 6282-2-1982 防止回流水污染用带动件装置.第2部分:公称尺寸小于等于DN54的终端反压力阀规范 Devices with moving parts for the prevention of contamination of water by backflow - Specification for terminal anti-vacuum valves of nominal size up to and including DN 54
BS 6282-4-1982 防止回流水污染用带动件装置.第4部分:公称尺寸小于等于DN42的组合单向阀和反压力阀规范 Devices with moving parts for the prevention of contamination of water by backflow - Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42
BS 6283-2-1991 热水系统安全控制装置.第2部分:压力范围从1bar到10bar的温度减压阀规范 Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-4-1991 热水系统中安全控制装置.第4部分:最大供给压力不超过12bar、标准尺寸不超过DN50的放松减压阀规范 Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar
BS 6290-4-1997 铅酸固定电池和电池组.阀门调节类型分类规范 Lead-acid stationary cells and batteries - Specification for classifying valve regulated types
BS 6364-1984 制冷设备用阀门规范 Specification for valves for cryogenic service
BS 6675-1986 供水设备用供水阀门(铜合金)规范 Specification for servicing valves (copper alloy) for water services
BS 6683-1985 阀门安装和使用指南 Guide to installation and use of valves
BS 7016-3-1988 往复式内燃机部件和系统.第3部分:阀门、凸输轴传动和驱动机构的术语词汇 Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms
BS 7296-1-1990 液压动力卡盘式阀的空腔.第1部分:二通镶套滑动阀规范 Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves
BS 7350-1990 加热和冷却水系统用双调节球形阀和流量测量装置规范 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
BS 7403-2-1998 内燃机满液流润滑油过滤器.元件分支阀特性试验方法 Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics
BS 7403-9-1995 内燃机用全流式润滑油过滤器.入口和出口防泄油阀试验方法 Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves
BS 7438-1991 弹簧加载型钢和铜合金单盘压片止回阀规范 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 7461-1991 装有流量调节器、闭路开关检验、闭合位置指示开关或气流量控制器电动式气体自动关闭阀规范 Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS 7478-1991 恒温散热器阀的选择和使用指南 Guide to selection and use of thermostatic radiator valves
BS 759-1-1984 锅炉与锅炉连接管路用阀门、水位计及其它安全管件.第1部分:阀门、安装件和管件规范 Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings
BS 7942-2000 检修机构用恒温混合阀 Thermostatic mixing valves for use in care establishments
BS AU 50-3.1e-2002 轮胎和车轮.阀门.尺寸、名称与符号、使用中阀门压力等级和夹紧阀门扭矩 Tyres and wheels - Valves - Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves
BS C 22-1995 航空用内胎轮胎和无内胎轮胎阀的试验方法.气门芯和帽 Test methods for aircraft inner tube and tubeless tyre valves - Cores and caps
BS C 9-1970 航空用高压充气阀连接尺寸规范 Specification for coupling dimensions for high pressure air charging valves for aircraft
BS EN 10090-1998 内燃机用阀门钢和合金 Valve steels and alloys for internal combustion engines
BS EN 1074-1-2000 供水用阀门.对目的要求的符合性及合适的验证试验.一般要求 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - General requirements
BS EN 1074-2-2000 供水用阀门.对目的要求的符合性及合适的验证试验.截止阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Isolating valves
BS EN 1074-3-2000 供水用阀门.对目的要求的符合性及合适的验证试验.止回阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves
BS EN 1074-4-2000 供水系统用的阀门.产品与用途要求的适用性和合适的验证试验.空气阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Air valves
BS EN 1074-5-2001 供水阀门.与用途要求的适用性和合适的验证试验.控制阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves
BS EN 1074-6-2004 供水用阀门.目的要求和适当检定试验的合理性.给水栓 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Hydrants
BS EN 1092-1-2002 法兰及其连接.按PN标示的管、阀门、配件和附件用的圆形法兰.钢法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Steel flanges
BS EN 1092-2-1997 法兰及其连接.按PN标注的管、阀门、管接头和附件的圆形安装法兰.第2部分:铸铁法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges
BS EN 1092-3-2004 法兰及其连接件.标注PN的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges
BS EN 1092-4-2002 法兰及其连接件.按PN标注的管道、阀门、配件和附件用圆形法兰.铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges
BS EN 1111-1999 卫生用具龙头.恒温混合阀(PN10).一般技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
BS EN 1171-2002 工业阀门.铸铁闸阀 Industrial valves - Cast iron gate valves
BS EN 12050-4-2001 建筑物和工地用废水处理设备.施工和试验规则.不含粪便和含有粪便的废水用止回阀 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Non-return valves for faecal-free wastewater and wastewater containing faecal matter
BS EN 12094-13-2001 固定消防系统.气体灭火系统元件.止回阀和非止回阀试验方法和要求 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for check valves and non-return valves
BS EN 12094-4-2004 固定式消防系统.气体灭火系统用元件.容器阀组件及其传动器的要求和试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for container valve assemblies and their actuators
BS EN 12100-1998 塑料管道系统.聚乙稀(PE)阀门.阀座间抗弯曲性的试验方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
BS EN 12106-1998 塑料管道系统.聚乙稀(PE)阀门.挤压后抗内压力的试验方法 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
BS EN 12107-1998 塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
BS EN 12117-1998 塑料管道系统.管件、阀门和附件.气体流速与压降之间关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
BS EN 12119-1997 塑料管道系统.聚乙烯(PE)阀.耐力热循环抗性的测试方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
BS EN 1213-2000 建筑物阀门.建筑物内饮水供水用的铜合金断流阀.试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
BS EN 12201-4-2002 供水用塑料管道系统.聚乙烯.阀门 Plastic piping systems for water supply - Polyethylene (PE) - Valves
BS EN 12259-2-1999 固定灭火系统.喷洒器和喷水系统元部件.报警湿阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Wet alarm valve assemblies
BS EN 12259-3-2000 固定灭火系统.喷洒器和喷水系统用元部件.报警干阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Dry alarm valve assemblies
BS EN 12266-1-2003 工业用阀门.阀门试验.压力试验、试验规程和验收标准.强制要求 Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements
BS EN 12266-2-2002 工业用阀门.阀门试验.试验、试验规程和验收标准.补充要求 Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
BS EN 12284-2003 冷却系统和加热泵.阀.要求、试验及标记 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
BS EN 12288-2003 工业用阀.铜合金闸阀 Industrial valves - Copper alloy gate valves
BS EN 12334-2001 工业阀门.铸铁单向阀门 Industrial valves - Cast iron check valves
BS EN 12351-1999 工业阀门.带法兰连接的阀门保护帽 Industrial valves - Protective caps for valves with flanged connections
BS EN 12380-2002 排水系统用进气阀.要求、试验方法和合格评定 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity
BS EN 12514-2-2000 油燃烧器供油系统的安装.安全性要求和试验.部件、阀门、管道、过滤器、油空气分离器、油量计 Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
BS EN 12516-1-2005 工业阀门.外壳设计强度.钢制阀门外壳的列表法 Industrial valves - Shell design strength - Tabulation method for steel valve shells
BS EN 12516-2-2004 工业阀门.外壳设计强度.钢制阀门外壳的计算方法 Industrial vales - Shell design strength - Calculation method for steel valve shells
BS EN 12516-3-2002 阀门.外壳设计强度.实验方法 Valves - Shell design strength - Experimental method
BS EN 12541-2003 卫生设备配件.压力冲洗阀和自动关闭便池冲水阀PN10 Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10
BS EN 12567-2000 工业阀门.液化天然气用隔离阀.适用性验证试验规范 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
BS EN 12569-1999 工业阀门.化学和石油化学工艺工业阀门.要求和试验 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
BS EN 12570-2000 工业阀门.操作元件尺寸控制方法 Industrial valves - Method for sizing the operating element
BS EN 12627-1999 工业阀门.钢阀门的对接焊接端 Industrial valves - Butt welding ends for steel valves
BS EN 1267-1999 阀门.用水作为试验流体的耐流动性能试验 Valves - Test of flow resistance using water as a test fluid
BS EN 12760-1999 阀门.钢阀门的套节焊接端 Valves - Socket welding ends for steel valves
BS EN 1286-1999 卫生排水塞.低压机械混合阀.一般技术规范 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
BS EN 1287-1999 卫生排水塞.低压恒温混合阀.一般技术规范 Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
BS EN 12982-2000 工业阀门.对焊尾阀一端至另一端和中心到端面的尺寸 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
BS EN 13082-2001 危险品运输罐.装罐设备.蒸汽传输阀门 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
BS EN 13152-2002 液化石油气瓶阀门规范和测试.自闭锁 Specification and testing of LPG cylinder valves - Self closing
BS EN 13153-2002 液化石油气瓶阀门规范和测试.手动操作 Specification and testing of LPG cylinder valves - Manually operated
BS EN 13175-2003 液化石油气(LPG)罐阀和配件的规范和试验 Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings
BS EN 13244-4-2003 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.阀门 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves
BS EN 13308-2002 危险物品运输用槽罐车.槽罐车用辅助设备.无压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
BS EN 13312-5-2001 生物技术.管道和仪表性能标准.阀门 Biotechnology - Performance criteria for piping and instrumentation - Valves
BS EN 13316-2002 危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
BS EN 13397-2002 工业阀.金属材料制隔膜阀 Industrial valves - Diaphragm valves made of metallic materials
BS EN 1349-2000 工业用工序控制阀门 Industrial process control valves
BS EN 13617-3-2004 加油站.剪切阀的结构和性能的安全要求 Petrol filling stations - Safety requirements for constuction and performance of shear valves
BS EN 13648-1-2002 冷凝容器.防超压安全保护装置.冷凝设备的安全阀 Cryogenic vessels - Safety devices for protection against excessive pressure - Safety valves for cryogenic service
BS EN 1366-2-1999 服务设施的耐火试验.防火阀 Fire resistance tests for service installations - Fire dampers
BS EN 13709-2003 工业用阀.钢制球阀、球状截止阀和止回阀 Industrial valves - Steel globe and globe stop and check valves
BS EN 13774-2003 最大工作压力小于或等于16巴的配气系统用阀门.性能要求 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
BS EN 13786-2004 丁烷、丙烷或它们的混合物用最大输出压力4巴及以下和100 kg/h及以下容积的自动转换阀及其相关安全设备 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
BS EN 13789-2003 工业用阀.铸铁球阀 Industrial valves - Cast iron globe valves
BS EN 13792-2002 实验室内用水龙头和阀门的识别色码 Colour coding of taps and valves for use in laboratories
BS EN 13828-2003 建筑物用阀.建筑物内饮用水供给用手动铜合金及不锈钢球阀.试验及要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements
BS EN 13942-2003 石油和天然气工业.管道输送.管道阀 Petroleum and natural gas industries - Pipeline transportation - Pipeline valves
BS EN 13953-2003 液化石油气(LPG)用移动式可填充储气瓶的减压安全阀 Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG)
BS EN 14071-2004 LPG罐用减压阀.辅助设备 Pressure relief valves for LPG tanks - Ancillary equipment
BS EN 14124-2004 带内溢流口的冲洗水箱的进水阀 Inlet valves for flushing cisterns with internal overflow
BS EN 14129-2004 LPG罐用减压阀 Pressure relief valves for LPG tanks
BS EN 14141-2003 天然气输送用管道阀.性能要求和试验 Valves for natural gas transportation in pipelines - Performance requirements and tests
BS EN 14189-2003 可运输气瓶.气瓶定期检查时气瓶阀的检查和维修 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
BS EN 14382-2005 气压调节站和装置用安全设备.进气口压力100巴及以下的气体安全截止阀 Safety devices for gas pressure regulating stations and installations — Gas safety shut-off devices for inlet pressures up to 100 bar
BS EN 144-1-2000 呼吸保护装置.气瓶阀.插入式连接器用螺纹连接 Respiratory protective devices - Gas cylinder valves - Thread connections for insert connector
BS EN 144-2-1999 呼吸保护装置.气瓶阀.出口连接 Respiratory protective devices - Gas cylinder valves - Outlet connections
BS EN 144-3-2003 呼吸保护装置.气瓶阀.潜水用Nitrox和氧气气瓶的出口接头 Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen
BS EN 1452-4-2000 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).阀门和附属设备 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment
BS EN 14529-2005 呼吸保护装置.逃生用包含由需求阀控制的正压呼吸器的带半罩式面具的自持式开路压缩气体呼吸机 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
BS EN 14593-1-2005 呼吸防护装置.带用量阀的压缩空气管路呼吸装置.全罩式装置.要求、检验和标记 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a full mask - Requirements, testing, marking
BS EN 14593-2-2005 呼吸防护装置.带用量阀的压缩空气管路呼吸装置.在正压下半罩式装置.要求、检验和标记 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a half mask at positive pressure - Requirements, testing, marking
BS EN 14596-2005 危险物品运输用罐.罐用辅助设备.应急减压阀 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
BS EN 14848-2005 气溶胶容器.25.4 mm孔径的金属容器.阀座尺寸 Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups
BS EN 14849-2005 气溶胶容器.玻璃容器.气溶胶阀门金属箍尺寸 Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules
BS EN 1487-2000 建筑物阀门.液压安全组.试验和要求 Building valves - Hydraulic safety groups - Tests and requirements
BS EN 1488-2000 建筑物阀门.膨胀组.试验和要求 Building valves - Expansion groups - Tests and requirements
BS EN 1489-2000 建筑物阀门.安全阀.试验和要求 Building valves - Pressure safety valves - Tests and requirements
BS EN 1490-2000 建筑物阀门.温度和压力结合型的释放阀门.试验和要求 Building valves - Combined temperature and pressure relief valves - Tests and requirements
BS EN 1491-2000 建筑物阀门.膨胀阀门.试验和要求 Building valves - Expansion valves - Tests and requirements
BS EN 1503-1-2000 阀门.阀门体、帽和盖用材料.欧洲标准中规定的钢材 Valves - Materials for bodies, bonnets and covers - Steels specified in European Standards
BS EN 1503-2-2000 阀门.阀门体、帽和盖用材料.欧洲标准中规定之外的钢材 Valves - Materials for bodies, bonnets and covers - Steels other than those specified in European Standards
BS EN 1503-3-2000 阀门.阀门体,帽和盖用材料.欧洲标准中规定的铸铁 Valves - Materials for bodies, bonnets and covers - Cast irons specified in European Standards
BS EN 1503-4-2002 阀门.阀体、阀帽和阀盖用材料.欧洲标准中规定的铜合金 Valves - Materials for bodies, bonnets and covers - Copper alloys specified in European Standards
BS EN 1555-4-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves
BS EN 1567-2000 建筑物阀门.供水减压阀和组合减压阀.要求和试验 Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests
BS EN 161-2002 气体燃烧器和燃气器具自动关闭阀 Automatic shut-off valves for gas burners and gas appliances
BS EN 1626-1999 制冷容器.制冷用阀门 Cryogenic vessels - Valves for cryogenic service
BS EN 1643-2000 燃气燃烧装置和燃气器具的自动关闭阀的阀门检验系统 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
BS EN 1680-1997 塑料软管系统.聚乙烯(PE)管道系统用的阀门.弯曲力施加在工作机构上和之后的密封性的检验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
BS EN 1704-1997 塑料管道系统.热塑料管阀.弯曲情况下温度循环后阀门完整性的试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
BS EN 1705-1997 塑料管道系统.热塑性阀门.经过外部冲击后阀门的完整性试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
BS EN 1751-1999 建筑物通风.出气口设备.减振器和阀的空气动力学试验 Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves
BS EN 1759-1-2004 法兰及其连接件.等级标示的管、阀门、配件和附件用环形法兰.NPS 1/2到24 钢法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class-designated - Steel flanges, NPS 1/2 to 24
BS EN 1759-3-2004 法兰及其连接件.标注等级的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges
BS EN 1759-4-2003 法兰及其连接件.标注等级的管道、阀门、配件及附件用圆形法兰.铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges
BS EN 1827-1999 呼吸保护装置.防气体或气体和颗粒或只防颗粒的无吸气阀带分离式过滤器的半面罩.要求、试验和标记 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
BS EN 19-2002 工业阀门.金属阀门的标志 Industrial valves - Marking of metallic valves
BS EN 1984-2000 工业阀门.钢插板阀门 Industrial valves - Steel gate valves
BS EN 215-2004 恒温散热器控制阀.要求和试验方法 Thermostatic radiator valves - Requirements and test methods
BS EN 26553-1991 自动凝汽阀标志规范 Specification for marking of automatic steam traps
BS EN 26554-1991 法兰式自动凝汽阀的面对面尺寸规范 Specification for face-to-face dimensions for flanged automatic steam traps
BS EN 26704-1991 自动凝汽阀分类 Classification of automatic steam traps
BS EN 26948-1991 自动凝汽阀生产和性能特点试验规范 Specification for production and performance characteristic tests for automatic steam traps
BS EN 27841-1991 自动凝汽阀蒸汽损失的测定方法 Methods for determination of steam loss of automatic steam traps
BS EN 27842-1991 自动凝汽阀排放量的测定方法 Methods for determination of discharge capacity of automatic steam traps
BS EN 28233-1992 热塑性塑料阀门的扭矩试验方法 Thermoplastics valves - Torque - Test method
BS EN 28659-1992 热塑性塑料阀门.疲劳强度.试验方法 Thermoplastics valves - Fatigue strength - Test method
BS EN 331-1998 建筑物燃气供应设备用手动球阀和密封底部锥体旋塞阀 Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings
BS EN 405-2002 呼吸保护装置.防气体或防气体和颗粒的阀滤式半面罩.要求、试验和标记 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
BS EN 417-1992 与便携式灶具配用的带有或不带阀门的一次性金属液化石油气瓶.制作、检验、试验和标记 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
BS EN 45510-7-1-2000 发电站设备采购指南.管道系统和阀门.高压管道系统.第1节:高压管道系统 Guide for the procurement of power station equipment - Pipework and valves - High pressure piping systems - Section 1: High pressure piping systems
BS EN 45510-7-2-2000 发电站设备采购指南.管道系统和阀门.锅炉和高压阀门.第2节:锅炉和高压阀门 Guide for the procurement of power station equipment - Pipework and valves - Boiler and high pressure valves - Section 2: Boiler and high pressure valves
BS EN 488-2003 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层钢管用钢阀门 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 50216-8-2005 电力变换器和电抗器附件.绝缘液电路用蝶阀 Power transformer and reactor fittings — Part 8: Butterfly valves for insulating liquid circuits
BS EN 558-1-1996 工业用阀.法兰管系统使用的金属阀的面至面和中心至面的尺寸.PN设计阀 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN-designated valves
BS EN 558-2-1996 工业用阀.法兰管系统使用的金属阀.面至面和中心至面的尺寸.分类设计阀 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Class-designated valves
BS EN 561-2002 气焊设备.焊接、切割和类似加工工艺用断路阀门快速连接器 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS EN 593-2004 工业阀门.金属蝶阀 Industrial valves - Metallic butterfly valves
BS EN 60534-1-2005 工业过程控制阀.控制阀术语和一般考虑 Industrial-process control valves - Control valve terminology and general considerations
BS EN 60534-2-1-1999 工业过程控制阀 .流量.在安装条件下确定流体流量的规模方程 Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions
BS EN 60534-2-3-1998 工业过程控制阀.流量.试验程序 Industrial-process control valves - Flow capacity - Test procedures
BS EN 60534-2-5-2003 工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式 Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
BS EN 60534-3-1-2000 工业过程控制阀.尺寸.带法兰的两路、球型、直立式控制阀门端面间尺寸和带法兰的两路、球型、角度控制阀门中 Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
BS EN 60534-3-2-2001 工业过程控制阀.尺寸.蝶形阀除外的转式控制阀端面距 Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
BS EN 60534-3-3-1998 工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀端对端尺寸 Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60534-5-2004 工业过程控制阀.标记 Industrial-process control valves - Marking
BS EN 60534-6-1-1998 工业过程控制阀 .控制阀位置控制器的安装详图.位置控制器在线性执行机构上的安装 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators
BS EN 60534-6-2-2001 工业过程控制阀.定位器装到控制阀的安装细则.旋转传动装置上安装的定位器 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators - Positioner mounting on rotary actuators
BS EN 60534-8-1-2005 工业过程控制阀.噪声问题.气动流流经控制阀产生的噪声的实验室测量 Industrial-process control valves — Part 8-1: Noise considerations — Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-8-2-1991 工业过程控制阀.第8部分:噪声.第2节:控制阀气动噪声实验室测量 Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS EN 60534-8-3-2000 工业流程控制阀.噪声.控制阀气动噪声预测法 Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method - Control valve aerodynamic noise prediction method
BS EN 60534-8-4-1994 工业过程控制阀.第8部分:噪声.第4节.气动噪声预测 Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow
BS EN 60700-1-1999 高压直流(HVDC)电力传输半导体闸流阀.电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Electrical testing
BS EN 60730-2-19-2002 家用及类似用途的电自动控制装置.特殊要求 .电动油阀的特殊要求，包括机械要求 Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated oil valves, including mechanical requirements
BS EN 60730-2-8-2002 家用和类似用途的自动电控制器规范.特殊要求.电操作水阀门的特殊要求,包括机械要求 Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated water valves, including mechanical requirements
BS EN 60896-21-2005 固定式铅酸蓄电池组.阀门调节型.试验方法 Stationary lead-acid batteries - Valve regulated types - Methods of test
BS EN 60896-22-2005 固定式铅酸蓄电池组.阀门调节型.要求 Stationary lead-acid batteries - Valve regulated types - Requirements
BS EN 61056-1-2003 便携式铅酸电池和蓄电池(阀调节型).一般要求、功能特性.试验方法 Portable lead-acid cells and batteries (valve-regulated types) - General requirements, functional characteristics - Methods of test
BS EN 61056-2-2003 便携式铅酸电池和蓄电池(阀调节型).尺寸、接线端和标记 Portable lead-acid cells and batteries (valve-regulated types) - Dimensions, terminals and marking
BS EN 61514-2-2004 工业过程控制系统.气动输出智能阀门定位器性能评价的方法 Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
BS EN 61514-2002 工业过程控制系统.气动输出阀门定位器性能评价的方法 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
BS EN 61954-2000 送电和配电系统用电力电子设备.静态变量补偿器用半导体闸流管阀门的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
BS EN 629-1-1996 可移动的储气瓶.连接储气瓶和阀用的25E锥螺纹.规范 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification
BS EN 629-2-1996 可移动的储气瓶.连接储气瓶和阀用的25E锥螺纹.量规检验 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Gauge inspection
BS EN 736-1-1995 阀门.术语.阀门类型定义 Valves - Terminology - Definition of types of valves
BS EN 736-2-1997 阀门.术语.阀门零部件的定义 Valves - Terminology - Definition of components of valves
BS EN 736-3-1999 阀门.术语.术语定义 Valves - Terminology - Definition of terms
BS EN 738-3-1999 医疗用气体的压力调节器.与气瓶阀组合的压力调节器 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
BS EN 816-1997 卫生间水龙头旋塞装置.自动切断阀 PN 10 Sanitary tapware - Automatic shut-off valves PN 10
BS EN 917-1997 塑料管道系统.热塑阀门.抗内压和泄漏密封性的试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
BS EN 962-1997 气瓶.工业和医用气瓶的阀保护帽和阀罩 Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
BS EN ISO 10417-2004 石油和天然气工业.井下安全阀系统.设计、安装、操作和矫正 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
BS EN ISO 10432-2005 石油和天然气工业.下降孔设备.地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
BS EN ISO 10434-2004 石油、石化和相关工业用螺栓帽状钢闸阀 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
BS EN ISO 10497-2004 阀门试验.耐火试验要求 Testing of valves - Fire type-testing requirements
BS EN ISO 10692-2-2001 气瓶.用于微电子工业的储气瓶阀的连接接头.接到钢瓶连接接头上的阀门的定型试验和规范 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Specification and type testing for valve to cylinder connections
BS EN ISO 11114-1-1998 可运输气瓶.装气气瓶和阀门材料的兼容性.金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials
BS EN ISO 11114-2-2001 可运输气瓶.气瓶和含气阀门材料的可兼容性.非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Non-metallic materials
BS EN ISO 11114-3-1998 可运输气瓶.装气气瓶和阀门材料的兼容性.有氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Autogenous ignition test in oxygen atmosphere
BS EN ISO 11116-1-1999 气瓶.阀门与气瓶连接用17E锥型螺纹.规范 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Specifications
BS EN ISO 11116-2-1999 气瓶.气瓶与瓶阀连接用17E锥螺纹.检验量规 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges
BS EN ISO 12209-1-2001 气瓶.压缩可呼吸空气用气瓶阀的放气连接器.叉形连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Yoke type connections
BS EN ISO 12209-2-2001 气瓶.压缩可呼吸空气用气瓶阀的放气连接器.螺纹式连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Threaded connections
BS EN ISO 12209-3-2001 气瓶.压缩可呼吸气体用气瓶阀的出口连接.230巴阀门转接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Adaptor for 230 bar valves
BS EN ISO 13340-2001 可运输燃气瓶.不可再填充气体的钢气瓶的阀门.规范和原型件试验 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing
BS EN ISO 13341-1998 可运输储气瓶.储气瓶阀配件 Transportable gas cylinders - Fitting of valves to gas cylinders
BS EN ISO 13758-1997 石油和石油产品的试验方法.液化石油气.丙烷干燥性的评估.阀冻结法 Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
BS EN ISO 14246-2001 可运输的储气瓶.储气瓶阀门.生产试验和检验 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections
BS EN ISO 14723-2002 石油和天然气工业.管道输送系统.海下管道阀门 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
BS EN ISO 15245-1-2001 气瓶.连接储气瓶阀门接头用平行螺纹.规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification
BS EN ISO 15245-2-2001 储气瓶.气阀与储气瓶连接的平行螺纹.量规检验 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Gauge inspection
BS EN ISO 15364-2000 船舶与海上技术.散货船真空/压力阀 Ships and marine technology - Pressure/vacuum valves for cargo tanks
BS EN ISO 15761-2003 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
BS EN ISO 15848-1-2006 工业阀门.漏气的测量、试验和鉴定程序.阀门定型试验的分类系统和鉴定程序 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Classification system and qualification procedures for type testing of valves
BS EN ISO 15996-2005 储气瓶.剩余压力阀.一般要求和型式试验 Gas cylinders - Residual pressure valves - General requirements and type testing
BS EN ISO 17292-2004 石油、石油化工和相关工业用金属球阀 Metal ball valves for the petroleum, petrochemical and allied industries
BS EN ISO 3822-2-1996 声学.由供水设施和设备发出噪音的实验室试验.放水龙头和混合阀的安装和工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves
BS EN ISO 3822-3-1997 声学.供水设施中使用的设备和装置发出噪音的实验室试验.管路阀门和装置的安装和工作条作 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for in-line valves and appliances
BS EN ISO 407-2004 小型医用气瓶.针导轭式阀连接 Small medical gas cylinders - Pin-index yoke-type valve connections
BS EN ISO 4126-1-2004 防超压安全装置.安全阀 Safety devices for protection against excessive pressure - Safety valves
BS EN ISO 4126-4-2004 过压保护安全设备.由伺服电动机控制的安全阀 Safety devices for protection against excessive pressure - Pilot operated safety valves
BS EN ISO 5135-1999 声学.通过混响室测定空调终端设备、空调终端装置、阻尼器和阀门噪音的声音功率级 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
BS EN ISO 5210-1996 工业阀门.多回转阀门驱动装置的附件 Industrial valves - Multi-turn valve actuator attachments
BS EN ISO 5211-2001 工业用阀门.部分回转阀门驱动装置的附件 Industrial valves - Part-turn actuator attachments
BS EN ISO 9093-1-1995 小艇.金属海水阀和通体配件 Small craft - Seacocks and through-hull fittings - Metallic
BS ISO 10294-2-1999 耐火试验.空气调节系统用防火阀.试验结果的分类、标准和应用领域 Fire-resistance tests - Fire dampers for air distribution systems - Classification, criteria and field of application of test results
BS ISO 10294-4-2001 耐火试验.用于空气调节系统的防火阀.热释放装置试验 Fire-resistance tests - Fire dampers for air distribution systems - Test of thermal release mechanism
BS ISO 10294-5-2005 耐火试验.用于空气分配系统的防火阀.膨胀防火阀 Fire-resistance tests - Fire dampers for air distribution systems - Intumescent fire dampers
BS ISO 10372-1998 液压流体动力.4孔和5孔伺服阀.安装面 Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces
BS ISO 10770-1-1998 液压流体动力.电动调节液压控制阀.第1部分:四向流动控制阀的试验方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves
BS ISO 10770-2-1998 液压流体动力.电动调节液压控制阀.第2部分:三向流动控制阀的试验方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves
BS ISO 11727-1999 气动流体力学.控制阀和其它元部件的气门和控制机构的标识 Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components
BS ISO 11929-4-2001 电离辐射测量的检测限和判断阀的确定.在没有样品处理的影响下用模拟线性刻度辐射强度计测量的基本原理和方 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
BS ISO 12238-2001 气压液动.方向控制阀门.转换时间的测量 Pneumatic fluid power - Directional control valves - Measurement of shifting time
BS ISO 14617-8-2004 图示的图形符号.阀门和气流调节器 Graphical symbols for diagrams - Valves and dampers
BS ISO 15218-2003 气液传动.3/2电磁阀.安装接口表面 Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces
BS ISO 15364-2000 船舶技术.货槽用压力/真空阀 Ships and marine technology. Pressure/vacuum valves for cargo tanks
BS ISO 15407-1-2000 气动流体动力.尺寸为18mm和26mm的五孔方向控制阀.无电气连接器的安装界面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector
BS ISO 15407-2-2003 气压传动.五气口定向控制阀,规格18mm和26mm.有任选电连接器的安装接口 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector
BS ISO 15665-2003 声学.管、阀和法兰隔声 Acoustics - Acoustic insulation for pipes, valves and flanges
BS ISO 17082-2004 气压传动.阀.供货商文件中的数据 Pneumatic fluid power - Valves - Data to be included in supplier literature
BS ISO 20401-2005 气动液压驱动系统.方向控制阀.直径为8mm-12mm的电动圆形连接器的管脚分布规范 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
BS ISO 4401-2005 液压流体动力.四孔定向控制阀.安装面 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
BS ISO 5599-1-2001 气压流体动力.五通方向控制阀.不带电连接器的安装接口表面 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector
BS ISO 5599-2-2001 气压流体动力.五通方向控制阀.带选用电气连接器的安装接口面 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector
BS ISO 5781-2000 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面 Hydraulic fluid power - Pressure reducing valves, sequence valves , unloading valves, throttle valves and check valves - Mounting surfaces
BS ISO 6263-1997 液压流体动力.补偿式流量控制阀.安装面 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
BS ISO 6264-1998 液压流体动力.减压阀.安装面 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
BS ISO 6953-2-2001 气压传动.压缩空气调压阀和带过滤器的调压阀.评定供应商文件中包括的主要特性的试验方法 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliers
BS ISO 7789-1998 液压流体动力.二孔、三孔和四孔拧入式卡盘阀.孔腔 Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
BS ISO 7790-1998 液压流体动力.规格为02、03和05型的四孔模数叠阀和四孔定向控制阀.夹紧尺寸 Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
BS ISO 9393-1-2004 工业用热塑性阀门.压力试验方法和要求.总则 Thermoplastics valves for industrial applications - Pressure test methods and requirements - General
BS ISO/TR 7470-2000 储气瓶阀门出口.已标准化或使用中的供应目录 Valve outlets for gas cylinders - List of provisions which are either standardized or in use
BS MA 5-1970 阀门黄铜名牌规范 Specification for brass service nameplates for valves
德国阀标准(DIN valve standards)

--------------------------------------------------------------------------------
编号 中文名称 英文名称
DIN 11832-1-1990 农场和牲畜饲养设备.输送液态粪肥的管道用阀门管件.第1部分:最大1巴的静压力闸阀 Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
DIN 11852-2000 食品和化学工业用阀门.不锈钢配件.焊合三通、弯头和异径接头 Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on
DIN 12918-1-1999 实验室设备.实验室管件.第1部分:水阀 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12918-2-2002 实验室设备.实验室配件.第2部分:燃气阀门 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12918-3-2004 实验室设备.实验室配件.第3部分:工业气体阀门 Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
DIN 12918-4-2004 实验室设备.实验室配件.第4部分:纯气体阀门 Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
DIN 14380-1978 标称压力为16的压力限制阀 Pressure limitation valve, nominal pressure 16
DIN 14381-1999 B型PN 16 自锁紧压力阀 Pressure valve type B PN 16, self-locking
DIN 14461-1-2003 输送阀装置.第1部分:带半刚性管的水龙带卷绕轮 Delivery valve installation - Part 1: Hose reel with semi-rigid hose
DIN 14461-2-1989 消防水龙带连接供水阀."干式”扬水管的供水装置及排水装置 Delivery valve installation connected with dry rising fire mains; filling station and output station
DIN 14461-3-2006 消防用输送阀装置.第3部分:标定压力PN16的水龙带连接阀 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN 14461-4-1989 消防水龙带连接供水阀."干式”扬水管的供水配件PN16 Delivery valve installations connected with dry rising fire mains; filling armaturs PN 16
DIN 14461-5-1984 与干式灭火上升总管道连接的输送阀装置.PN16救火软管阀 Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16
DIN 14461-6-1998 消防水龙带阀门装置.第6部分:扁形消防水龙带壁装消防栓箱的尺寸和安装 Delivery valve installation - Part 6: Dimensions of cabinets and installation of hose reels with lay-flat hoses according to DIN EN 671-2
DIN 14463-3-2003 消防用水设备.遥控注水和排水装置.地3部分:"湿/干"和"干"灭火管道系统PN16通风阀 Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 3: Valves for ventilation PN 16 of fire extinguishing pipe systems "wet/dry" and "dry"
DIN 16270-2004 压力表用不带试验连接的PN 250和PN 400阀门 PN 250 and PN 400 valves without test connection for pressure gauges
DIN 16271-2004 压力表用带试验连接的PN 250和PN 400阀门 PN 250 and PN 400 valves with test connection for pressure gauges
DIN 16272-2004 压力表用带关闭试验连接的PN 250和PN 400阀门 PN 250 and PN 400 valves with shut-off test connection for pressure gauges
DIN 16287-2004 压力表用阀门和旋塞的试验连接用盖 Caps for test connection on valves and cocks for pressure gauges
DIN 20040-1990 软管管接头.连接套管阀.公称压力16 Hose fittings; nipple valves; nominal pressure 16
DIN 20042-2001 标称压力40的水阀.尺寸和要求 Watervalve, nominal pressure 40 - Dimensions and requirements
DIN 21556-1987 矿井支撑物.单立支撑的阀门.标识代码 Mine support; valves for individual props; identification code
DIN 21557-1987 矿井支承.动力支承的压力极限阀.标识代码 Mine support; yield valves for powered support; identification code
DIN 21635-1998 空气调节系统.空气阀门.结构和操作 Air regulation systems in mining - Air locks - Building and operation
DIN 21636-2003 采矿空气调节系统.带式输送机气阀.尺寸、标识、要求和试验 Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
DIN 24311-1992 液压流体动力.比例控制阀和伺服阀.定义、符号和单位 Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
DIN 24340-2-1982 液压阀.换向阀用安装面和连接板 Hydraulic valves; mounting surfaces and connecting plates for directional control valves
DIN 27205-9-2005 铁路车辆的状况.制动器.第9部分:驾驶员制动阀、控制装置和驾驶室中的显示装置的功能 State of railway vehicles - Brake - Part 9: Function of driver's brake valve, control devices and indicators in driver's cabs
DIN 28140-1-2005 排泄阀用连接件.第1部分:非合金钢、不锈钢或有衬钢.尺寸配合PN10 Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10
DIN 28140-2-2005 排泄阀用连接件.第2部分:搪玻璃钢件.连接尺寸PN10 Connections for bottom discharge valves - Part 2: On glass lined steel; connecting dimensions PN 10
DIN 30690-2 Bb.1-1980 煤气安装用零部件.第2部分:煤气器具用阀门的金属材料要求.材料、强度数据的选用说明 Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances, notes for selection for materials, strength data
DIN 3160-1974 公称压力25巴的冷冻电路的直通截止阀 Through-valves for refrigerant circuits, nominal pressure 25 bar
DIN 3161-1974 公称压力25巴的冷冻电路的弯管阀 Elbow valves for refrigerant circuits; nominal pressure 25 bar
DIN 3162-1974 公称压力25巴的冷冻电路的阀门的螺纹盖板 Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar
DIN 3163-1974 公称压力25巴的冷冻电路的控制直通阀 Control through valves for refrigerant circuits, nominal pressure 25 bar
DIN 3164-1974 冷却剂循环阀的示位器 Position indicator for valves for refrigerant circuits
DIN 3174-1-2000 呼吸器.钢瓶阀门.第1部分:压缩氧气钢瓶阀门 Respiratory equipment - Cylinder valves - Part 1: Cylinder valves for compressed oxygen
DIN 3174-10-1987 呼吸器.消防队用呼吸保护装置阀门.第10部分:外部尺寸 Respiratory equipment; valves for respiratory protective devices; for fire brigades; outer dimensions
DIN 3202-4-1982 阀门面到面尺寸和中心到面尺寸.第4部分:带内螺纹连接的阀门 Face-to-face and centre-to-face dimensions of valves; Valves with female thread connection
DIN 3202-5-1984 阀门面到面尺寸和中心到面尺寸.第5部分:压紧联轴节连接用阀门 Face-to-face and centre-to-face dimensions of valves; valves for connection with compression couplings
DIN 3223-1974 阀用操作扳手 Handling keys for valves
DIN 3223/A1-2002 阀门用的操作键.修改件 A1 Handling keys for valves; Amendment A1
DIN 3227-2002 建筑物饮用水供水阀.角辅助阀.要求和试验 Valves for potable water supply in buildings - Angle service valves - Requirements and tests
DIN 3230-4-1977 阀门交货技术条件.饮用水装置的阀门.要求和检验 Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
DIN 3236-1-1994 分流器法兰密封管座的直排型阀门.第1部分:无衬 Straight pattern valves with flange socket placed in shunt - Part 1: Without lining
DIN 3236-2-1996 分流器中带法兰密封的流量观查孔玻璃阀门.第1部分:珐琅衬 Straight pattern valves with flange socket placed in shunt - Part 2: With enamel lining
DIN 3237-1-1994 主电源连接的法兰密封管座直排型阀门.第1部分:无衬 Straight pattern valves with flange socket in main power connection - Part 1: Without lining
DIN 3237-2-1994 主电源连接的法兰密封管座直排型阀门.第2部分:带塑料内衬 Straight pattern valves with flange socket in main power connection - Part 2: With plastic lining
DIN 3237-3-1996 主电源连接装置带法兰密封的流量观察孔玻璃阀门.第3部分:带橡胶外皮 Straight pattern valves with flange socket in main power connection - Part 3: With rubber lining
DIN 3247-1985 无止回阀的带法兰的吸滤器 Flanged suction strainers without non-return valve
DIN 3248-1985 无止回阀的螺纹连接的吸滤器 Threaded suction strainers without non-return valve
DIN 3249-1985 带止回阀的螺纹连接的吸滤器 Threaded suction strainers with non-return valve
DIN 32509-1998 焊接、切割及类似工艺用手动关闭阀.结构类型.安全性要求和试验 Hand-operated shut-off valves for welding, cutting and allied processes - Type of construction, safety requirements, tests
DIN 3259-1985 带止回阀的带法兰的吸滤器(脚阀) Flanged suction strainers with non-return valve
DIN 3267-1972 水箱冲泄阀用冲洗管 Flushing tubes for flush-valves
DIN 3280-1988 家用供水管道的阀门.公称压力 PN 10 以下的锥形连接管.概述 Valves for domestic water supply; tapered unions up to PN 10; survey
DIN 3281-1988 家用供水管道的阀门.公称压力10的锥形管子接头.概述 Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
DIN 3283-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带内螺纹的废水排放连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
DIN 3284-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带外螺纹的连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
DIN 3285-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
DIN 3287-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.管路用带螺纹的连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
DIN 3289-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的锥形管子接头 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
DIN 3291-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
DIN 32931-2005 充气娱乐商品和玩具的气阀和气阀套.术语、定义、要求和试验 Valves and valve adapters for inflatable recreational articles and toys - Terms and definitions, requirements and testing
DIN 3334-1968 带法兰接头的加热装置用混合阀.标称压力为6、最高温度110 ℃的三通混合阀、四通混合阀.安装尺寸 Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions
DIN 3335-1968 加热装置的带螺丝端部的混合阀.三通混合阀.四通混合阀.公称压力6.使用温度110 ℃.安装尺寸 Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN 3336-1968 带焊接弯管端的加热装置的混合阀.公称压力6、最大使用温度110 ℃的三通混合阀、四通混合阀.安装尺寸 Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN 3338-1987 多转的阀门启动器连接.C形传动部件的尺寸 Multi-turn valve actuator attachment; dimensions of type C driving components
DIN 3341-1989 容积式压缩机的板阀.吸气阀.放气阀.主要尺寸.材料和安装 Plate valves for displacement compressors; suction valves, discharge valves; main dimensions, materials, installation
DIN 3352-5-1980 钢制滑门阀.第5部分:同形系列 Steel gate valves, isomorphe series
DIN 3356-1-1982 球形阀.第1部分:一般数据 Globe valves; General data
DIN 3357-4-1981 满孔有色金属球阀 Full bore nonferrous metal ball valves
DIN 3357-5-1981 变径孔有色金属球阀 Reduced bore nonferrous metal ball valves
DIN 3358-1982 线性阀门操作机构.配合尺寸 Linear valve actuator attachment; mating dimensions
DIN 3383-1-1990 煤气软管组件和连接阀.安全软管组件、带有快速连接装置的安全阀 Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device
DIN 3394-1-2004 自动控制阀.第1部分:压力为4巴到16巴的减压安全和调节阀 Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar
DIN 3394-3-2004 自动控制阀.第3部分:压力为4巴及以下的0级减压安全阀 Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar
DIN 3399-1986 燃气低压截止阀.安全性要求和试验 Gas low-pressure cut-off valves; safety requirements, testing
DIN 3430-1986 燃气阀.角型球截止阀 Gas valves; angle pattern ball shut-off valves
DIN 3431-1986 燃气阀门.压力连接的角型球截止阀 Gas valves; angle pattern ball shut-off valves with compression coupling
DIN 3432-1986 燃气阀门..压力连接的直型球截止阀 Gas valves; straight pattern ball shut-off valves with compression coupling
DIN 3475-1993 未处理水和可饮用水用的球墨铸铁管阀和管接头.内部涂搪瓷防腐蚀.质量要求和试验 Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing
DIN 3476-1996 生水和饮用水用阀门和接头.粉漆及环氧内涂防腐层.要求和检验 Valves and fittings for untreated and potable water - Protection against corrosion by internal epoxy coating of coating powders (P) or liquid varnishes (F) - Requirements and tests
DIN 3500-1990 家用供水装系统的截流阀.PN10 活塞式滑阀 PN 10 piston type gate valves for use in drinking water supply systems
DIN 3502-2002 家庭用供水截流阀.双通阀.倾斜式阀帽PN10型.Y型阀.DVGW技术规则 Stopvalves for domestic water supply - Two-way valves - Oblique bonnet type PN 10; Y-type valve; Technical rule of the DVGW
DIN 3509-1981 供水阀二维特性.PN10型水龙头 Valves for water supply dimensional characteristics; taps PN 10
DIN 3512-2002 家庭用供水截流阀.双路阀.立式阀帽型PN10:直线型球形阀:DVGW的技术规则 Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW
DIN 3528-1986 煤气装置用阀门.带密封垫的喷嘴 Valves for gas installations; nozzles with gasket
DIN 3529-1982 气体装置阀.内螺纹连接端直通型旋塞 Valves for gas installations; straight pattern stop cocks female threaded ends
DIN 3532-1981 煤气装置用阀门.角度型旋阀 Valves for gas installations; angle pattern stop cocks
DIN 3533-1981 煤气装置用阀门.带压力接头的角度型旋阀 Valves for gas installations; angle pattern stop cocks with compression fitting
DIN 3534-1982 气体装置阀.带压紧接头的直通型龙头 Valves for gas installations; straight pattern taps with compression fitting
DIN 3535-1-1991 煤气供气密封件:家用设备煤气阀门用弹性密封材料:要求和检验 Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
DIN 3535-6-1999 供气用密封垫.第6部分:气阀、煤气设备和煤气主管道用基于合成纤维、石墨或聚四氟乙烯的密封垫材料 Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
DIN 3536-1994 室内设备、煤气分配和煤气输送管道的煤气阀用润滑剂 Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines
DIN 3538-1986 煤气装置阀门.蝶型阀.内螺纹接头 Valves for gas installations; butterfly valves; female threaded ends
DIN 3543-1-1984 金属排放阀.要求、检验 Metal tapping valves; requirements, testing
DIN 3543-2-1984 金属攻丝断流阀.尺寸 Metallic tapping stop valves; dimensions
DIN 3543-3-1978 塑料管用PVC排放阀.尺寸 PVC tapping valves for plastic pipes; dimensions
DIN 3543-4-1984 高密度管道用高密度聚乙烯排放阀.尺寸 High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN 3546-1-2002 家庭用供水截流阀.第1部分:放水阀、门阀和隔膜阀用截流阀、手动式活塞型门阀用一般要求和试验.DVGW的技术规 Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
DIN 3548-1-1993 带法兰凝汽阀 Flanged steam traps
DIN 3581-1990 气体管道.1号规格的管阀箱 Gas pipelines; size 1 valve box
DIN 3582-1990 气体管道.2号规格的管阀箱 Gas pipelines; size 2 valve box
DIN 3583-1990 气体管道.3号规格的管阀箱 Gas pipelines; size 3 valve box
DIN 3584-1990 气体管道.4号规格的管阀箱 Gas pipelines; size 4 valve box
DIN 3585-1990 气体管道.5号规格的管阀箱 Gas pipelines; size 5 valve box
DIN 3842-1979 PN 10加热设备阀门.尺寸.材料.结构 Valves for heating installations, PN 10; dimensions, materials, design
DIN 3844-1981 供暖设备用阀.带螺纹承插口的铜合金制PN16球阀.尺寸、材料 Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets; dimensions, materials
DIN 3848-1981 供暖设备阀.PN12.5 注水和排气开关.尺寸.材料 Valves for heating installations; filling and evacuating taps PN 12.5; dimensions, materials
DIN 3852-1-2002 配件和阀门用螺柱端和孔.第1部分:带公制小螺距螺纹螺塞.一般外置型 Stud ends, ports, for fittings, valves - Part 1: Plug screw with metric fine pitch thread; General outlay of types
DIN 3852-11-1994 压合接头、阀门、螺旋塞和E型螺纹管堵用螺纹管堵和螺纹孔.设计尺寸 Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions
DIN 3852-2-2000 管件和阀门用管堵和螺纹孔.带惠氏管螺纹的螺塞.各类的总成本 Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
DIN 4000-13-1987 阀门用产品特性图表 Tabular layouts of article characteristics for valves
DIN 4055-1992 水管.地下消防栓的阀门室.DVGW实施规程 Water pipelines; valve box for underground hydrants; DVGW code of practice
DIN 4056-1992 水管.截止阀门室.DVGW实施规程 Water pipelines; valve boxes for stop valves; DVGW code of practice
DIN 4057-1992 水管.放水阀门室.DVGW实施规程 Water pipelines; valve box for tapping valves; DVGW code of practice
DIN 40741-1-1999 铅酸蓄电池.工业用带有正栅极板的固定阀稳定蓄电池和固定电解质.额定电容、主要尺寸和重量 Lead-acid batteries - Stationary valve regulated batteries with positive grid plates and immobilized electrolyte for industrial application - Rated capacities, main dimensions, weights
DIN 42568-1982 变压器.取样和排放用15和32公称内径的放出阀 Transformers; outlet valve DN 15 and DN 32 for sampling and discharge
DIN 43689-1977 电气开关装置中空气压缩装置用40(570 psig)和64 (911 psig)断流阀. Shut-off valves 40 (570 psig) and 64 (911 psig) for compressed-air installations in electrical switching plants
DIN 45635-50-1987 机器空气噪声的测量.空气噪声测量.包络面法.阀门 Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves
DIN 475-1-1984 第1部分:螺栓、螺钉、阀门和配件用扳手开口度 Widths across flats for bolts, screws, valves and fittings
DIN 477-4-1982 压力气瓶阀.野营用储气瓶的旋转止回阀 Compressed gas cylinder valves; swing check valves for camping-cylinders
DIN 477-5-2002 气瓶阀.第5部分:最大试验压力为450巴.出口接头 Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections
DIN 4817-1-1981 液化气截止阀.定义、要求、试验和标记 Shut off valves for liquefied gases; definitions, requirement, testing, marking
DIN 5589-1990 有轨车辆的压缩空气装置.安全阀.安装和连接尺寸及要求 Compressed air equipment for rail vehicles; safety valves; mounting and connecting dimensions, requirements
DIN 5593-1994 铁路车辆用压缩空气装置.止回阀.安装和连接尺寸 Compressed air equipment for rail vehicles - Check valves - Installation and companion dimensions
DIN 5594-1994 铁路车辆用压缩空气装置.双止回阀.安装和连接尺寸 Compressed air equipment for rail vehicles - Double check valves - Installation and companion dimensions
DIN 58362-7-2002 输液.输液器和附件.第7部分:止回阀 Infusion - Infusion equipment and accessories - Part 7: Check valves
DIN 58600-2003 呼吸保护器.德国消防队用自调需氧量氧气调节阀与独立开路压缩空气呼吸器面罩之间的插塞连接 Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade
DIN 6273-1973 内燃机.指示阀 Internal combustion engines; indicator valves
DIN 6274-1982 通用内燃机.带阀门组的压缩空气罐.内径为38mm.装配 Internal combustion engines for general purposes; Compressed air containers with valve block; 38 mm bore; Assembly
DIN 6276-1982 通用内燃机.压缩空气罐的阀门组.内径为38mm Internal combustion engines for general purposes; Valve blocks for compressed air containers; 38 mm bore
DIN 71401-1-1985 内燃机排气阀.不用于新设计 Drain cocks for internal combustion engines; not to be used for new designs
DIN 73368-1986 燃料喷射装置的溢流阀和空心螺钉 Overflow valves and hollow screw for fuel injection devices
DIN 74279-2001 气压制动系统.过流阀 Air braking systems - Charging valves
DIN 74280-1998 空气制动系统.止回阀 Air braking systems - Check valve
DIN 74341-1987 气压制动系统.回流循环阀 Air braking systems; shuttle valve with backflow
DIN 7786-1977 内胎气门.有旋转阀体的单弯结构轮胎气门 Tube valves; swivel type tyre valve, single bend form
DIN 78026-1978 无内胎的车轮气门阀.充空气 － 水用的金属座式气门阀 Valves for tubeless tyres; metal base type for air-waterfilling
DIN 85003-1-1997 船用阀门技术规范.第1部分:总则 Technical specifications for valves for shipboard use - Part 1: General
DIN 85003-2-1997 船用阀门技术规范.第2部分:可能提出的要求和试验方法 Technical specifications for valves for shipboard use - Part 2: Survey of possible requirements and methods of test
DIN 85003-3-1997 船用阀门技术规范.第3部分:蝶阀 Technical specifications for valves for shipboard use - Part 3: Butterfly valves
DIN 85003-4-1997 船用阀门技术规范.第4部分:停止阀 Technical specifications for valves for shipboard use - Part 4: Stop valves
DIN 85003-5-1997 船用阀门技术规范.第5部分:截止止回阀 Technical specifications for valves for shipboard use - Part 5: Cutt off type non return valves
DIN 85003-6-1997 船用阀门技术规范.第6部分:手动停止阀 Technical specifications for valves for shipboard use - Part 6: Hand operated gate valves
DIN 85003-7-1997 船用阀门技术规范.第7部分:隔膜阀 Technical specifications for valves for shipboard use - Part 7: Diaphragm valves
DIN 85003-8-1999 船用阀门技术规范.第8部分:球阀 Technical specifications for valves for shipboard use - Part 8: Ball valves
DIN 86066-2002 止回阀用铸钢焊接弯头.根据PN 10的连接尺寸 DN 50至150 Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10
DIN 86211-1991 公称压力（PN）16、带C或B型消防软管管接头和带法兰连接的灭火阀 Fire valves for PN 16, with fire hose couplings type C or B and with flange connection
DIN 86251-1998 造船用DN15至500规格的带法兰的铸铁截止阀 Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500
DIN 86252-1998 造船用DN15至500规格的带法兰的铸铁单向阀 Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500
DIN 86259-2000 船只及造船技术.超轻型DN32-DN125(PN10)凸缘闸阀 Ships and marine technology - Flanged gate valves extra light duty DN 32 to DN 125, PN 10
DIN 86260-1998 造船用DN15至500规格的带法兰的炮铜截止阀 Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500
DIN 86261-1998 造船用DN15至500规格的带法兰的截止型炮铜单向阀 Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500
DIN 86263-2000 Y型,软密封,承口连接的船用直通阀.DN15-DN50,PN16 Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16
DIN 86264-2000 Y型,软密封,带法兰的短型船用直通阀.DN15-DN200 Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200
DIN 86265-2000 Y型,软密封,普通型带法兰的船用直通阀.DN15-DN200 Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200
DIN 86501-2002 符合DIN 3861的与W出口端成24度连接的炮铜制螺纹帽状阀门 Valves, screwed bonnet type of gun metal with 24°-connection with port end W according to DIN 3861
DIN 86528-1996 螺盖阀的锁紧垫板圈 Tab washers for screwed bonnet valves
DIN 86552-2002 符合DIN 3861的与W出口端成24度连接的钢制螺纹帽状阀门 Valves, screwed bonnet type of steel with 24°-connection with port end W according to DIN 3861
DIN 86720-2002 带螺纹的阀帽和法兰DN 20 至 DN 100、PN 16 的炮铜制楔形滑门阀 Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16
DIN 87101-2003 DN为50-150、标称压力为1的垂直自闭式止回阀(止回排水阀).标称压力为10的法兰的配合尺寸 Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10
DIN 87303-2000 船上阀用带有锥形和平行面的直角器 Squares with tapered and parallel sides for valves for shipboard use
DIN 87308-1999 船上用阀门的操作装置.带锥形侧面的四方孔手摇曲柄 Operating devices for valves for shipboard use - Crank handles with square hole with tapered sides
DIN 87901-2001 泵用双向安全阀 Sniffle valves for pumps
DIN 8905-3-1983 带密封和半密封压缩机的制冷系统用管道.毛细节流阀的补充交货技术条件 Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
DIN EN 10090-1998 内燃机阀门用钢及合金 Valve steels and alloys for internal combustion engines; German version EN 10090:1998
DIN EN 1074-1-2000 供水用阀门.适用性要求和专用验证试验.第1部分:一般要求 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements; German version EN 1074-1:2000
DIN EN 1074-2-2004 供水用阀门.适用性要求和适当的验证试验.第2部分:隔离阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves; German version EN 1074-2:2000 + A1:2004
DIN EN 1074-3-2000 供水用阀门.目的要求和专用检查试验的合理性.第3部分:止回阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000
DIN EN 1074-4-2000 供水用阀门.目的要求适用性和适用验证试验.第4部分:空气阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves; German version EN 1074-4:2000
DIN EN 1074-5-2001 供水阀门.适用性要求和适配试验.第5部分:控制阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001
DIN EN 1074-6-2004 供水用阀门.适用性要求和相应的检查试验.第6部分:给水栓 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants; German version EN 1074-6:2004
DIN EN 1092-1-2002 法兰及其连接件.管道、阀门、配件和附件用圆形法兰.第1部分:用PN标注的钢制法兰; 德文版本 EN 1092-1:2001 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated; German version EN 1092-1:2001
DIN EN 1092-3-2004 法兰及其连接件.PN标注的管道、阀门、配件和附件用圆形法兰.第3部分:铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
DIN EN 1092-4-2002 法兰及其连接件.按PN标志的管道、阀门、配件和附件用圆形法兰.第4部分:铝合金法兰; 德文版本 EN 1092-4:200 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002
DIN EN 1111-1998 卫生设备管件.恒温混合阀(PN 10).通用技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
DIN EN 1171-2003 工业阀门.铸铁闸阀 Industrial valves - Cast iron gate valves; German version EN 1171:2002
DIN EN 12050-4-2001 建筑物和施工场地废水提升装置.制造和试验原理.第4部分:无粪便废水和含粪便废水单向阀 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter; German version EN 12050-4:2000
DIN EN 12094-13-2001 固定式消防系统.气体灭火系统用部件.第13部分:止回阀和非止回阀的要求和试验方法; 德文版本 EN 12094-13:20 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; German version EN 12094-13:2001
DIN EN 12094-4-2004 固定式消防系统.气体灭火系统用元件.第4部分:容器阀组件及其传动装置的要求和试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004
DIN EN 12094-5-2006 固定式消防系统.气体灭火系统元件.第5部分:高和低压力选择器阀及其启动器的要求和试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators; German version EN 12094-5:2006
DIN EN 12100-1997 塑料管道系统.聚乙烯(PE)阀.三点负载抗弯曲试验方法 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 12107-1997 塑料管道系统.注塑热塑性塑料配件、阀门和附件.注塑热塑材料管件持久静液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
DIN EN 12117-1997 塑料管道系统.配件、阀门和附件.气流和压降关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships; German version EN 12117:1997
DIN EN 1213-1999 建筑阀门.建筑物饮用水铜合金截止阀.试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999
DIN EN 12201-4-2002 供水用塑料管系统.聚乙烯(PE).第4部分:阀; 德文版本 EN 12201-4:20 Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves; German version EN 12201-4:2001
DIN EN 12259-2-2001 固定灭火系统.喷头和喷水系统元部件.第2部分:报警湿阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies (includes Amendment A1:2001); German version EN 12259-2:1999 + A1:2001
DIN EN 12259-2/A2-2006 固定灭火系统.喷头和喷水系统元部件.第2部分:报警湿阀组件.德文版本 EN 12259-2-1999/A2-2005 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies; German version EN 12259-2:1999/A2:2005
DIN EN 12259-3-2001 固定灭火系统.喷头和喷水系统元部件.第3部分:报警干阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies (includes Amendment A1:2001); German version EN 12259-3:2000 + A1:2001
DIN EN 12259-3/A2-2006 固定式消防系统.喷头和喷水系统用部件.第3部分:报警干阀组件; 德文版本 EN 12259-3-2000/A2-2005 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies; German version EN 12259-3:2000/A2:2005
DIN EN 12266-1-2003 工业用阀门.阀门试验.第1部分:压力试验、试验程序和验收准则.强制性要求 Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003
DIN EN 12266-2-2003 工业用阀门.阀门测试.第2部分:试验、试验规程和验收标准.补充要求 Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements; German version EN 12266-2:2002
DIN EN 12284-2004 制冷系统和热泵.阀.要求、检验和标记 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking; German version EN 12284:2003
DIN EN 12288-2003 工业阀门.铜合金闸阀 Industrial valves - Copper alloy gate valves; German version EN 12288:2003
DIN EN 12334-2004 工业阀门.铸铁止回阀 Industrial valves - Cast iron check valves; German version EN 12334:2001 + A1:2004
DIN EN 12351-1999 工业阀门.带法兰联接的阀门用护罩.德文标准12351:1999 Industrial valves - Protective caps for valves with flanged connections; German version EN 12351:1999
DIN EN 12380-2003 排水系统通气阀.要求、试验方法和合格评定 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity; German version EN 12380:2002
DIN EN 12514-2-2000 油燃烧器供油系统的安装.第1部分:安全要求和试验.部件,阀门管道,过滤器,油气分离器,油量计 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000
DIN EN 12516-1-2005 工业用阀.外壳设计强度.第1部分:钢阀外壳用造表方法 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells; German version EN 12516-1:2005
DIN EN 12516-2-2004 工业用阀.外壳设计强度.第2部分:钢阀外壳的计算方法 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells; German version EN 12516-2:2004
DIN EN 12516-3-2003 阀门.外壳设计强度.第3部分:实验方法; 德文版本 EN 12516-3:2002 Valves - Shell design strength - Part 3: Experimental method; German version EN 12516-3:2002
DIN EN 12541-2003 卫生便池.压力冲洗阀和自动关闭冲水阀 Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10; German version EN 12541:2002
DIN EN 12567-2000 工业阀门.液化天然气用隔离阀.适用性及适用验证试验规范 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests; German version EN 12567:2000
DIN EN 12569-2001 工业阀门.化学和石油化工工业用阀门.要求和试验 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); German version EN 12569:1999 + AC:2000
DIN EN 12570-2000 工业阀门.操作元件尺寸控制方法 Industrial valves - Method for sizing the operating element; German version EN 12570:2000
DIN EN 12627-1999 工业阀门.钢阀门用对焊端头 Industrial valves - Butt welding ends for steel valves; German version EN 12627:1999
DIN EN 1267-1999 阀门.以水作试验流体的流动阻力试验 Valves - Test of flow resistance using water as test fluid; German version EN 1267:1999
DIN EN 12760-1999 阀门.钢阀门的承口焊接端头 Valves - Socket welding ends for steel valves; German version EN 12760:1999
DIN EN 1286-1999 卫生器具管件.低压机械调混合阀.通用技术规范 Sanitary tapware - Low pressure mechanical mixing valves; general technical specification; German version EN 1286:1999
DIN EN 1287-1999 卫生器具管件.低压恒温混合阀.通用技术规范 Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
DIN EN 12982-2000 工业阀门.铰链焊接端阀门端对端和中心对末端尺寸 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; German version EN 12982:2000
DIN EN 13082-2001 危险货物运输罐.运输罐配套设备.蒸汽传输阀门 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; German version EN 13082:2001
DIN EN 13152-2003 自闭合式液化石油气储气瓶阀的规范和检验 Specification and testing of LPG cylinder valves - Self closing (includes Amendment A1:2003); German version EN 13152:2001 + A1:2003
DIN EN 13153-2003 手工操作的液化石油气瓶阀门的规范和试验 Specification and testing for liquefied petroleum gas (LPG) cylinder valves - Manually operated (includes Amendment A1:2003); German version EN 13153:2001 + A1:2003
DIN EN 13175-2005 液化石油气(LPG)罐阀门及配件的规范和试验 Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings; German version EN 13175:2003 + A1:2005
DIN EN 13244-4-2003 地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第4部分:阀门 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves; German version EN 13244-4:2002
DIN EN 13308-2003 危险物品运输槽罐车.槽罐车辅助设备.无压平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve; German version EN 13308:2002
DIN EN 13312-5-2001 生物技术.管路和仪器性能准则.第5部分:阀门 Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; German version EN 13312-5:2001
DIN EN 13316-2003 危险物品运输槽罐车.槽罐车辅助设备.压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002
DIN EN 13397-2002 工业用阀门.金属材料制隔膜阀门; 德文版本 EN 13397:2001 Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001
DIN EN 1349-2000 工业过程控制阀门 Industrial process control valves; German version EN 1349:2000
DIN EN 13617-3-2004 加油站.第3部分:剪阀的建造和性能的安全要求 Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves; German version EN 13617-3:2004
DIN EN 13648-1-2002 冷凝容器.超压保护设施.第1部分:冷凝设备安全阀 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service; German version EN 13648-1:2002
DIN EN 13709-2003 工业用阀.钢制球阀、球状截止阀和止回阀 Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002
DIN EN 13774-2003 最大工作压力为16bar及以下的配气系统用阀.性能要求 Valves for gas distribution systems with maximum operating pressure 16 bar - Performance requirements; German version EN 13774:2003
DIN EN 13786-2004 丁烷、丙烷或其混合物用最大输出压力4巴以下(包括4巴)和最大容量100 kg/h以下(包括100 kg/h)的自动转换阀及 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 13786:2004
DIN EN 13789-2003 工业用阀.铸铁球阀 Industrial valves - Cast iron globe valves; German version EN 13789:2002
DIN EN 13792-2002 实验室用旋塞和阀门的颜色编码; 德文版本 EN 13792:2002 Colour coding of taps and valves for use in laboratories; German version EN 13792:2002
DIN EN 13828-2003 建筑物用阀.建筑物内饮用水供应用手动铜合金和不锈钢球阀.试验和要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003
DIN EN 13942-2005 石油和天然气工业.管道输送系统.管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003
DIN EN 13953-2003 液化石油气(LPG)用可运输的再充式储气瓶的减压阀 Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG); German version EN 13953:2003
DIN EN 13959-2005 防污止回阀.包括DN 6至DN 250.E系列A、B、C、D型 Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004
DIN EN 14071-2005 LPG罐用减压阀.辅助设备 Pressure relief valves for LPG tanks - Ancillary equipment; German version EN 14071:2004
DIN EN 14124-2005 带内溢水口的冲洗水箱用入口阀 Inlet valves for flushing cisterns with internal overflow; German version EN 14124:2004
DIN EN 14129-2005 LPG罐用减压阀 Pressure relief valves for LPG tanks; German version EN 14129:2004
DIN EN 14141-2004 天然气输送管道用阀门.性能要求和试验 Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2003
DIN EN 14189-2003 可运输储气瓶.储气瓶定期检查时气瓶阀的检查和维修 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders; German version EN 14189:2003
DIN EN 144-1-2005 呼吸保护器.气瓶阀门.第1部分:旋入式连接器的螺纹连接 Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector; German version EN 144-1:2000 + A1:2003 + A2:2005
DIN EN 144-2-1999 呼吸防护装置.气瓶阀门.第2部分:出口连接件 Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections; German version EN 144-2:1998
DIN EN 144-3-2003 呼吸保护器.气瓶阀门.第3部分:潜水用硝基气体和氧气气瓶的出口连接件 Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen; German version EN 144-3:2003
DIN EN 14432-2006 危险货物运输用容器.液体化学物品运输的容器设备.货物卸载和空气进给阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves; German version EN 14432:2006
DIN EN 14433-2006 危险货物运输用容器.液体化学物品运输的容器设备.脚踩阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves; German version EN 14433:2006
DIN EN 14451-2005 防饮用水回流污染的装置.直通反回流阀DN 8至DN 80. A型D系列 Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A; German version EN 14451:2005
DIN EN 14455-2005 防饮用水回流污染的装置.压缩空气进气阀DN15至DN 50. A型和B型L系列 Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B; German version EN 14455:2005
DIN EN 1452-4-1999 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:阀门和辅助设备 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment; German version EN 1452-4:1999
DIN EN 14529-2006 呼吸保护装置.逃生用包含由需求阀控制的正压呼吸器的带半罩式面具的自持式开路压缩空气呼吸机 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only; German version EN 14529:2005
DIN EN 14593-1-2005 呼吸保护装置.带断续供氧阀门的压缩气体管路呼吸装置.第1部分:带全罩式面具的装置.要求、试验、标记 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking; German version EN 14593-1:2005
DIN EN 14593-2 Berichtigung 1-2006 呼吸器保护装置.带断续供养阀门的压缩气体管路呼吸装置.第2部分:带增压半罩式面具的装置.要求、试验、标记. Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking; German version EN 14593-2:2005, Corrigenda to DIN EN 14593-2:2005-07; German version EN 14593-2:2005/AC:2005
DIN EN 14593-2-2005 呼吸器保护装置.带断续供氧阀门的压缩气体管路呼吸装置.第2部分:带增压半罩式面具的装置.要求、试验、标记 Respiratory protective devices - Compressed air line breathing with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking; German version EN 14593-2:2005
DIN EN 14596-2005 危险物品运输罐.罐的辅助设备.应急减压阀 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve; German version EN 14596:2005
DIN EN 14848-2006 气溶胶容器.25.4 mm孔径的金属容器.阀座尺寸.德文版本 EN 14848-2005 Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups; German version EN 14848:2005
DIN EN 14849-2006 气溶胶容器.玻璃容器.气溶胶阀箍尺寸.德文版本 EN 14849-2005 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules; German version EN 14849:2005
DIN EN 1487-2000 建筑物阀门.液压安全类.试验和要求 Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000
DIN EN 1488-2000 建筑物阀门.膨胀类.试验和要求 Building valves - Expansion groups - Tests and requirements; German version EN 1488:2000
DIN EN 1489-2000 建筑物阀门.压力安全阀门.试验和要求 Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000
DIN EN 1490-2000 建筑物阀门.组合型温度压力安全阀.试验和要求 Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000
DIN EN 1491-2000 建筑物阀门.膨胀阀门.试验和要求 Building valves - Expansions valves - Tests and requirements; German version EN 1491:2000
DIN EN 14912-2006 LPG设备和组件.在钢瓶的定期检查中液化石油气瓶阀的检查和维修.德文版本EN 14912-2005 LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders; German version EN 14912:2005
DIN EN 1503-1-2001 阀门.阀体、阀盖和阀套用材料.第1部分:欧洲标准规定的钢 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European standards; German version EN 1503-1:2000
DIN EN 1503-2-2001 阀门.阀体、阀盖和阀套材料.第2部分:欧洲标准中没有规定的钢 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified; German version EN 1503-2:2000
DIN EN 1503-3-2001 阀门.阀体、阀盖和阀套材料.第3部分:欧洲标准规定的铸铁 Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European standards; German version EN 1503-3:2000 + AC:2001
DIN EN 1503-4-2003 阀门.阀体、阀盖和阀套材料.第3部分:欧洲标准规定的铜合金 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards; German version EN 1503-4:2002
DIN EN 1555-4-2003 气体燃料塑料管道供气系统.聚乙烯(PE).第4部分:阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2002
DIN EN 1567-2000 建筑物阀门.水减压阀和组合水减压阀.要求和试验 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999
DIN EN 161-2002 气体燃烧器和燃气器具用自动关闭阀; 德文版本 EN 161:2001 Automatic shut-off valves for gas burners and gas appliances; German version EN 161:2001
DIN EN 1626-1999 低温容器.低温条件使用阀门 Cryogenic vessels - Valves for cryogenic service; German version EN 1626:1999
DIN EN 1643-2001 燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000
DIN EN 1680-1997 塑料管道系统.聚乙烯(PE)管道系统用阀门.操作机构弯曲时和弯曲后密封性试验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 1704-1997 塑料管道系统.热塑管道系统用阀门.弯曲加温度循环后阀门完好性测试方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
DIN EN 1705-1997 塑料管道系统.热塑阀门.外部冲击后阀门完好性试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN EN 1759-1-2005 法兰及其连接件.等级标示的管、阀、配件和附件用圆形法兰.第1部分:钢法兰.NPS 1/2至24 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24; German version EN 1759-1:2004
DIN EN 1759-3-2004 法兰及其接头.等级标示的管、阀、配件和附件用圆形法兰.第3部分:铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
DIN EN 1759-4-2003 法兰及其接头.指定类别的管、阀、配件和附件用圆形法兰.第4部分:铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003
DIN EN 1827-1999 呼吸防护装置.不带吸入阀门和带气体、含尘粒气体或纯尘粒分立式过滤器的半罩式面具.要求、检测、标识 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999
DIN EN 19-2002 工业用阀门.金属阀标志; 德文版本 EN 19:2002 Industrial valves - Marking of metallic valves; German version EN 19:2002
DIN EN 1964-2-2002 可运输气瓶.水容量为0.5升到150升(含150升)的可再填充可运输无缝钢瓶设计和制造规范.第2部分:阀门压力R<上 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above; German version EN 1964-2:2001
DIN EN 1983-2006 工业阀门.钢制球阀 Industrial valves - Steel ball valves; German version EN 1983:2006
DIN EN 1984-2000 工业阀门.钢门阀门 Industrial valves - Steel gate valves; German version EN 1984:2000
DIN EN 200-2005 卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification; German version EN 200:2004
DIN EN 215-2006 恒温散热器阀.要求和试验方法 Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004 + A1:2006
DIN EN 26554-1991 法兰连接的自动凝汽阀.面与面结合尺寸(ISO 6554-80) Flanged automatic steam traps; face-to-face dimensions (ISO 6554:1980); german version EN 26554:1991
DIN EN 26704-1991 自动蒸汽阀.分类 Automatic steam traps; classification (ISO 6704:1982); german version EN 26704:1991
DIN EN 26948-1991 自动凝汽阀.生产和性能特征试验.(ISO 6948-81) Automatic steam traps; production and performance characteristic tests (ISO 6948:1981); german version EN 26948:1991
DIN EN 27841-1991 自动凝汽阀.蒸汽损失的测定.试验方法.(ISO 7841-88) Automatic steam traps; determination of steam loss; test methods (ISO 7841:1988); german version EN 27841:1991
DIN EN 27842-1991 自动凝汽阀.排流量的测定.试验方法.(ISO 7842-88) Automatic steam traps; determination of discharge capacity; test methods (ISO 7842:1988); german version EN 27842:1991
DIN EN 28233-1991 热塑性塑料阀.扭矩.试验方法(ISO 8233-88) Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
DIN EN 28659-1991 热塑性塑料阀.疲劳强度.试验方法(ISO 8659-88) Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990
DIN EN 331-1999 建筑物燃气设备上的手动球阀和底部关闭锥形塞阀 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings; German version EN 331:1998
DIN EN 405-2002 呼吸保护设备.防煤气或防煤气与粉尘的带阀过滤半罩式面罩.要求、检验、标记; 德文版本 EN 405:2001 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; German version EN 405:2001
DIN EN 417-2003 便携式燃具用带或不带阀门的一次性使用液化石油气金属气罐.制造、检验、试验和标记 Non-refillable metallic cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking; German version EN 417:2003
DIN EN 45510-7-1-2000 发电厂设备和系统购置指南.第7-1部分:管道系统和阀.高压管道系统 Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999
DIN EN 45510-7-2-2000 发电厂设备和系统购置指南.第7-2部分:管道系统和阀.锅炉和高压管路阀门 Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999
DIN EN 488-2003 区域供暖管道.直埋式热水供应网预隔热连接管道系统.聚氨酯绝热和聚乙烯外覆层钢管钢阀门组件 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003
DIN EN 50216-8-2005 电力变换器和反应器配件.第8部分:绝缘液电路用蝶阀 Power transformer and reactor fittings - Part 8: Butterfly valves for insulating liquid circuits; German version EN 50216-8:2005
DIN EN 558-1-1995 工业阀门.带法兰管道中的金属阀门面-面尺寸和面-中心尺寸.第1部分:按PN标识的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves; German version EN 558-1:1995
DIN EN 558-2-1995 工业阀门.带法兰管道中的金属阀门面-面尺寸和面-中心尺寸.第2部分:按级别标识的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves; German version EN 558-2:1995
DIN EN 561-2002 气焊设备.焊接、切割和相关工艺用与关闭阀的速动连接; 德文版本 EN 561:2002 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes; German version EN 561:2002
DIN EN 593-2004 工业阀门.金属蝶阀 Industrial valves - Metallic butterfly valves; German version EN 593:2004
DIN EN 60534-1-2005 工业过程控制阀.第1部分:控制阀术语和一般条件 Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:2005); German version EN 60534-1:2005
DIN EN 60534-2-1-2000 工业过程控制阀.第2-1部分:流通能力.安装条件下流体流量的校准公式 Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998); German version EN 60534-2-1:1998
DIN EN 60534-2-3-1998 工业加工控制阀.第2-3部分:流量.试验方法 Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998
DIN EN 60534-2-5-2004 工业过程控制阀.第2-5部分:流通能力.通过有段间恢复能力的多段控制阀门的流体流量的校准公式 Industrial process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003); German version EN 60534-2-5:2003
DIN EN 60534-3-1-2000 工业过程控制阀.第3-1部分:尺寸.法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球形角型控制阀的中心与 Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000); German version EN 60534-3-1:2000 + Corrigendum 2000
DIN EN 60534-3-2-2002 工业过程控制阀.第3-2部分:尺寸.无法兰控制阀(薄型蝶阀除外)的端面间距尺寸 Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001
DIN EN 60534-3-3-2000 工业过程控制阀.第3-3部分:尺寸.对接焊双通球形、直型控制阀的首尾相接尺寸 Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998); German version EN 60534-3-3:1998
DIN EN 60534-5-2004 工业过程控制阀.第5部分:标记 Industrial-process control valves - Part 5: Marking (IEC 60534-5:2004); German version EN 60534-5:2004
DIN EN 60534-6-1-1998 工业加工用控制阀.第6部分:定位器与控制阀连接的安装细节.第1节:安装在线性作动器上的定位器 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997
DIN EN 60534-6-2-2001 工业过程控制阀.第6-2部分:控制阀定位器安装细则.旋转传动装置上安装的定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators (IEC 60534-6-2:2000); German version EN 60534-6-2:2001
DIN EN 60534-8-1-2006 工业过程控制阀.第8-1部分:噪声的考虑.气动流流经控制阀产生的噪声的实验室测量 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:2005); German version EN 60534-8-1:2005
DIN EN 60534-8-2-1994 工业过程控制阀.第8部分:噪声.第2节:控制阀液流噪声的实验室测量 Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993
DIN EN 60534-8-3-2001 工业过程控制阀.第8-3部分:噪声.控制阀气动噪声预测法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000
DIN EN 60534-8-4-2006 工业过程控制阀.第8-4部分:噪声考虑.气流噪声预测 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:2005 + Corrigendum 1:2006); German version EN 60534-8-4:2005
DIN EN 60700-1-2004 高压直流(HVDC)输电用晶闸管阀.第1部分:电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:1998 + A1:2003); German version EN 60700-1:1998 + A1:2003
DIN EN 60730-2-19-2002 家用和类似用途的自动电力控制器.第2-19部分:包括机械要求的电动油阀的特殊要求 (IEC 60730-2-19:1997 + A1 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 + A1:2000, modified); German version EN 60730-2-19:2002
DIN EN 60730-2-19/A11-2005 家用及类似用途的电自动控制装置.第2-19部分:包括机械要求的电动油阀的特殊要求 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements; German version EN 60730-2-19:2002/A11:2005
DIN EN 60730-2-8-2004 家用及类似用途的电气自动控制器.第2-8部分:电动水阀的特殊要求(包括机械要求) Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000, modified + A1:2002, modified); German version EN 60730-2-8:2002 + A1:2003
DIN EN 60896-21-2004 固定式铅酸蓄电池.第21部分:阀门调节型.试验方法 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test (IEC 60896-21:2004); German version EN 60896-21:2004
DIN EN 60896-22-2004 固定式铅酸蓄电池.第22部分:阀门调节型.要求 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements (IEC 60896-22:2004); German version EN 60896-22:2004
DIN EN 61056-1-2003 通用铅酸蓄电池组(阀门调节型).第1部分:一般要求、功能特性.试验方法 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics; Methods of test (IEC 61056-1:2002); German version EN 61056-1:2003
DIN EN 61056-2-2003 通用铅酸蓄电池组(阀门调节型).第2部分:尺寸、端子和标记 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002); German version EN 61056-2:2003
DIN EN 61514-2-2004 工业过程控制系统.第2部分:带气动输出的智能阀定位器的性能评估方法 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs (IEC 61514-2:2004); German version EN 61514-2:2004
DIN EN 61514-2002 工业过程控制系统.气动输出阀门定位器性能评价方法 (IEC 61514:2000); 德文版本 EN 61514:2002 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 61514:2000); German version EN 61514:2002
DIN EN 61954-2004 输电和配电系统电力电子设备.静态无功功率补偿器用晶闸管阀的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators (IEC 61954:1999 + Corr. 1999 + A1:2003); German version EN 61954:1999 + A1:2003
DIN EN 629-1-1996 可运输煤气罐.煤气罐连结阀用25E锥螺纹.第1部分:规范 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 1: Specification; German version EN 629-1:1996
DIN EN 629-2-1996 可运输煤气罐.煤气罐连结阀用25E锥螺纹.第2部分:量规检验 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection; German version EN 629-2:1996
DIN EN 736-2-1997 阀门.术语.第2部分:阀门元部件定义 Valves - Terminology - Part 2: Definition of components of valves; German version EN 736-2:1997
DIN EN 736-3-2002 阀门.术语.第3部分:术语定义(包括修改件A1) Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); German version EN 736-3:1999 + A1:2001
DIN EN 816-1997 卫生器具附件.自锁阀门PN 10 Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996
DIN EN 917-1997 塑料管道系统.热塑阀门.耐内压和密封性试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN EN 962-2000 移动式气瓶.工业和医疗气体瓶的阀门保护帽和阀盖.设计、制造和试验(包括修改件A1-1999和A2-2000) Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests (included amendment A1:1999 + A2:2000); German version EN 962:1996 + A1:1999 + A2:2000
DIN EN ISO 10297-2006 可运输气瓶.气瓶阀.规范和型式试验 Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2006); German version EN ISO 10297:2006
DIN EN ISO 10417-2005 石油和天然气工业.井下安全阀系统.设计、安装、操作和修整 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004); English version EN ISO 10417:2004
DIN EN ISO 10432-2005 石油和天然气工业.下降孔设备.地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004); English version EN ISO 10432:2004
DIN EN ISO 10434-2005 石油、石油化学和相关工业用螺栓帽状钢闸阀 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004); German version EN ISO 10434:2004
DIN EN ISO 10497-2004 阀门的测试.防火类型试验要求 Testing of valves - Fire type testing requirements (ISO 10497:2004); German version EN ISO 10497:2004
DIN EN ISO 10524-3-2006 医疗气体用压力调节器.第3部分:带气缸阀的压力调节器(ISO 10524-3:2005) Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005); German version EN ISO 10524-3:2006
DIN EN ISO 10692-1-2003 储气瓶.微电子工业用储气瓶阀接头.第1部分:输出口接头 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 1: Outlet connections (ISO 10692-1:2001); German version EN ISO 10692-1:2001
DIN EN ISO 10692-2-2003 储气瓶.微电子工业用储气瓶阀接头.第2部分:储气瓶阀接头规范和型式试验 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001
DIN EN ISO 11114-1-1998 可运输气瓶.装有气体的气瓶及其阀门材料的相容性.第1部分:金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997) (includes corrigendum AC:1998); German version EN ISO 11114-1:1997
DIN EN ISO 11114-2-2001 可运输气瓶.气瓶及阀门材料与内装气体的兼容性.第2部分:非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); German version EN ISO 11114-2:2000
DIN EN ISO 11114-3-1998 可运输气瓶.装有气体的气瓶和阀门材料的兼容性.第3部分:有氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997) (including corrigendum AC:1998); German version EN ISO 11114-3:1997 + AC:1998
DIN EN ISO 11114-4-2005 移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择耐氢脆的金属材料的试验方法 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); German version EN ISO 11114-4:2005
DIN EN ISO 11116-1-2000 移动式气瓶.气瓶.阀门与气瓶连接用17E锥螺纹.第1部分:规范 Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 1: Specification (ISO 11116-1:1999); German version EN ISO 11116-1:1999
DIN EN ISO 11116-2-1999 可运输的气罐.气体罐.阀门与气罐连接的17E 锥型螺纹.第1部分:检验量规 Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999); German version EN ISO 11116-2:1999
DIN EN ISO 12209-1-2001 储气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第1部分:轭式连接件 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); German version EN ISO 12209-1:2000
DIN EN ISO 12209-2-2001 储气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第2部分:螺纹式连接件 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000); German version EN ISO 12209-2:2000
DIN EN ISO 12209-3-2001 储气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第2部分:230bar阀门适配器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); German version EN ISO 12209-3:2000
DIN EN ISO 13340-2001 可运输气瓶.不可再灌装的气瓶阀门.规范和原型试验 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001); German version EN ISO 13340:2001
DIN EN ISO 13341-1998 可运输储气瓶.阀门和气瓶间的连接 Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997) (including corrigendum AC); German version EN ISO 13341:1997 + AC:1998
DIN EN ISO 13758-1997 液化石油气.丙烷干燥度评估.阀门冻结法 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996); German version EN ISO 13758:1996
DIN EN ISO 14246-2001 可运输气瓶.气瓶阀.生产试验和检验 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001
DIN EN ISO 14723-2003 石油和天然气工业.管道输送系统.海底管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001
DIN EN ISO 15245-1-2003 储气瓶.连接气瓶阀的平行螺纹.第1部分:规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001); German version EN ISO 15245-1:2001
DIN EN ISO 15245-2-2002 储气瓶.连接储气瓶阀门的平行螺纹.第2部分:量规检验 (ISO 15245-2:2001); 德文版本 EN ISO 15245-2:2001 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
DIN EN ISO 15364-2002 船舶和航海技术.油轮用压力/真空阀 (ISO 15364:2000); 德文版本 EN ISO 15364:2001 Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001
DIN EN ISO 15761-2003 石油和天然气工业用规格为DN 100及更小的钢闸阀、球阀和止回阀 Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)
DIN EN ISO 15848-1-2006 工业阀.漏气的测量、试验和鉴定程序.第1部分:阀门定型试验的分类系统和鉴定程序 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2006); German version EN ISO 15848-1:2006
DIN EN ISO 15996-2005 气瓶.残余压力阀门.一般要求和型式试验 Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005); German version EN ISO 15996:2005
DIN EN ISO 16135-2006 工业阀.热塑性材料的球闸阀 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006
DIN EN ISO 16136-2006 工业阀.热塑性材料的蝶阀 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006); German version EN ISO 16136:2006
DIN EN ISO 16137-2006 工业阀.热塑性材料的止回阀 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006); German version EN ISO 16137:2006
DIN EN ISO 16138-2006 工业阀.热塑性材料的球阀 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006
DIN EN ISO 16139-2006 工业阀.热塑性材料的门阀 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006); German version EN ISO 16139:2006
DIN EN ISO 17292-2004 石油、石油化学和相关工业用金属球阀 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004); German version EN ISO 17292:2004
DIN EN ISO 21787-2006 工业阀.热塑性材料的球形阀 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); German version EN ISO 21787:2006
DIN EN ISO 407-2005 小型医用气瓶.针导轭式阀连接 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2004); German version EN ISO 407:2004
DIN EN ISO 4126-1-2004 过压保护安全设备.第1部分:安全阀 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004); German version EN ISO 4126-1:2004
DIN EN ISO 4126-3-2006 过压保护安全设备.第3部分:组合中防爆板安全设备和安全阀 Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006); German version EN ISO 4126-3:2006
DIN EN ISO 4126-4-2004 过压保护安全设备.第4部分:安全操作导阀 Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004); German version EN ISO 4126-4:2004
DIN EN ISO 5135-1999 声学.采用在混响室测量方法测定航空终点站装置、航空终点站设备、消音器和阀门发出的噪音的声功率水平 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997); German version EN ISO 5135:1998
DIN EN ISO 5210-1996 工业阀门.多圈旋转阀门驱动器附件 Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991); German version EN ISO 5210:1996
DIN EN ISO 5211-2001 工业阀门.单圈旋转型阀门驱动器附件 Industrial valves - Part-turn actuator attachments (ISO 5211:2001); German version EN ISO 5211:2001
DIN EN ISO 9093-1-1998 小型船舶.船底阀和船体外壳管接头.第1部分:金属件 Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997
DIN IEC 60534-2-4-1990 工业过程控制阀.第2部分:流动能力.第4节:内在流动特性线和调节比例关系 Industrial-process control valves; flow capacity; inherent flow characteristics and rangeability; identical with IEC 60534-2-4:1989
DIN IEC 60534-7-1992 工业过程控制阀.第7部分:.数据表 Industrial process control valves; control valve data sheet; identical with IEC 60534-7:1989
DIN IEC 61148-1994 阀器件堆和组合装置及电力变流设备的端子标记 Terminal markings for valve device stacks and assemblies and for power convertor equipment; identical with IEC 61148:1992
DIN ISO 11727-2003 气压传动.控制阀和其他元件的气口和控制机构的标识 Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components (ISO 11727:1999)
DIN ISO 1204-1994 往复式内燃机.旋转方向和气缸标识、气缸头阀门、直列式发动机右侧和左测定义及在发动机上的位置 Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
DIN ISO 12238-2005 液压传动.方向控制阀门.移动时间测量(ISO 12238-2001) Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
DIN ISO 15407-1-2003 气压传动.五气口方向控制阀、规格18mm和26mm.第1部分:无电气接头的安装面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000)
DIN ISO 4010-1978 道路车辆.延迟针阀式标定喷嘴 Calibrating Nozzle, Delay Pintle Type
DIN ISO 5599-1-2005 气压传动.五气口方向控制阀.第1部分:不带电接头的安装面 Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector (ISO 5599-1:2001)
DIN ISO 6553-1981 自动蒸气阀.标记 Automatic steam traps; marking
DIN ISO 7368-1994 液压流体动力.两通口筒形插入阀.阀腔 Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989
DIN ISO 7967-3-1993 往复式内燃机.零部件和系统词汇.阀门、凸轮轴和传动机构 Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms; identical with ISO 7967-3:1987
DIN V 19259-2-1999 装置的文件.阀门的相关分类的标准数据元类型 Documentation of devices - Standard data element types with associated classification for valves
DIN V 3838-2003 加热装置用阀.有外螺纹管G 3/4 A和内部锥体的可拆卸连接 Valves for heating installations - Detachable connection with outside threaded pipe G 3/4 A and inside cone
欧洲阀标准(EN valve standards)

--------------------------------------------------------------------------------
编号 中文名称 英文名称
EN 10090-1998 内燃机阀门用钢和合金 Valve steels and alloys for internal combustion engines
EN 1074-1-2000 供水阀门 目的要求的适应性和合适的认证试验 第1部分：一般要求 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
EN 1074-2-2000 供水阀门 目的要求的适应性和合适的认证试验 第2部分：绝热阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
EN 1074-3-2000 供水阀门 目的要求的适应性和合适的认证试验 第3部分：检查阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
EN 1074-4-2000 供水阀门 目的要求的适应性和合适的认证试验 第4部分：气体阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
EN 1074-5-2001 供水阀门 目的要求的适应性和合适的认证试验 第5部分：控制阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
EN 1092-1-2001 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第1部分：钢法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
EN 1092-2-1997 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第2部分：铸铁法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 1092-3-2003 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第3部分：铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories PN designated - Part 3: Copper alloy flanges
EN 1092-4-2002 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第4部分：铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
EN 1111-1998 卫生水龙头 温度调节用混合阀（PN10） 一般技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
EN 1171-2002 工业阀门 铸铁闸门阀 Industrial valves - Cast iron gate valves
EN 12050-4-2000 建筑物和施工现场的废水抽取设备　施工原则和试验　第4部分：用于含粪便和不含粪便断线的单向阀 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12094-13-2001+AC-2002 固定式消防系统　气体灭火系统的部件　第13部分：对止回阀和非回流阀的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
EN 12094-5-2000 固定式消防系统　气体灭火系统的部件　第5部分：高、低压选择阀及其CO2系统驱动器触发要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO<(Index)2> systems
EN 12100-1997 塑料管道系统　聚乙稀(PE)阀门　支架间抗弯曲性的试验方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 12107-1997 塑料管道系统　压注热塑管件、阀门和辅助设备　管道组件压注用热塑 材料的长期液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
EN 12117-1997 塑料管道系统　热塑管件、阀门和配件　气流速率/压降之间关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
EN 12119-1997 塑料管道系统　聚乙烯(PE)阀门　抗热循环测试方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
EN 1213-1999 建筑物阀门 建筑物内便携式供水用的铜合金断流阀 试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
EN 12201-4-2001 供水系统用塑料管道系统　聚乙烯（PE）　第4部分：阀门 Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves
EN 12259-2-1999 固定消防系统　喷水器和喷水系统构件　第2部分：湿式报警阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
EN 12259-3-2000+A1-2001 固定消防系统　喷水器和喷水系统构件　第3部分：干式报警阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
EN 12266-1-2003 工业阀门　阀门试验　第1部分：压力试验、试验程序和验收标准、强制要求 Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria; Mandatory requirements
EN 12266-2-2002 工业阀门　阀门试验　第2部分：试验、试验程序和验收标准 补充要求 Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements
EN 12284-2003 制冷系统和加热泵　阀门　要求、试验和标志 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
EN 12288-2003 工业用阀 铜合金闸阀 Industrial valves - Copper alloy gate valves
EN 12334-2001 工业阀门　铸铁止回阀　 Industrial valves - Cast iron check valves
EN 12351-1999 工业阀门　带法兰连接的阀门保护帽 Industrial valves - Protective caps for valves with flanged connections
EN 12380-2002 排水系统用进气阀　要求、试验方法和合格评定 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity
EN 12514-2-2000 燃油炉供油系统用的装置　第２部分：安全要求和试验　零部件、阀门、管道、滤油器、油气分离器、油量指示表 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
EN 12516-3-2002+AC-2003 工业阀门　壳体设计强度　第３部分：试验方法 Valves - Shell design strength - Part 3: Experimental method
EN 12541-2002 卫生间水龙头 压力冲洗阀和自动关闭小便池冲洗阀PN10 Sanitary tapware - Pressure flushing valves und automatic closing urinal valves PN 10
EN 12567-2000 工业阀门　LNG隔离阀　适用性规范和适当检验测试 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
EN 12569-1999+AC-2000 工业阀门　化工和石油化学工业用阀门　要求和试验 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
EN 12570-2000 工业阀门　操作元件分级方法 Industrial valves - Method for sizing the operating element
EN 12627-1999 工业阀门　钢阀门的对焊端头 Industrial valves - Butt welding ends for steels valves
EN 1267-1999 阀门 用水作为试验流体的阻流试验 Valves - Test of flow resistance using water as test fluid
EN 12760-1999 阀门 钢阀门套接焊接端 Valves - Socket welding ends for steel valves
EN 1286-1999 卫生间泄水器 低压机械混合阀 通用技术规范 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
EN 1287-1999 卫生间泄水器 低压恒温混合阀 通用技术规范 Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
EN 12982-2000 工业阀门 对接焊端阀端面至端面以及中心至端面的尺寸 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
EN 13082-2001 危险品运输罐 罐辅助设备 蒸汽输送阀 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
EN 13152-2001+A1-2003 液化石油气瓶阀规范和测试 自动关闭阀 Specification and testing of LPG cylinder valves - Self closing
EN 13153-2001+A1-2003 液化石油气瓶阀规范和测试 手工操作阀 Specification and testing of LPG cylinder valves - Manually operated
EN 13175-2003 液化石油气（LPG）管阀门和装配的规范和试验 Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
EN 13244-4-2002 地上和地下给排水和污水压力系统用塑料管道 聚已烯（PE） 第4部分：阀门 Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves
EN 13308-2002 危险品运输罐 罐辅助设备 非压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
EN 13312-5-2001 生物技术 管道和仪器性能标准 第5部分：阀 Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves
EN 13316-2002 危险品运输罐 罐辅助设备 压力平衡底阀 Tanks for transporting dangerous goods - Service for tanks - Pressure balanced footvalve
EN 13397-2001 工业阀门 金属材料制成的隔膜阀 Industrial valves - Diaphragm valves made of metallic materials
EN 1349-2000+AC-2001 工业加工控制阀门 Industrial process control valves
EN 13648-1-2002 低温容器 抗过压保护安全设备 第1部分：低温服务用安全阀 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
EN 1366-2-1999 服务设施的耐火试验 第2部分：防火阀 Fire resistance tests for service installations - Part 2: Fire dampers
EN 13709-2002 工业阀门 钢球和球止回阀 Industrial valves - Steel globe and globe stop and check valves
EN 13774-2003 最大工作压力小于或等于16 bar的气体分配系统用阀门 性能要求 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 13789-2002 工业阀门 铸铁球阀 Industrial valves - Cast iron globe valves
EN 13792-2002 实验室中使用的龙头和阀门的色码 Colour coding of taps and valves for use in laboratories
EN 13828-2003 建筑物阀门 建筑物中饮用水供水用手动铜合金及不锈钢球阀 试验和要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Test and requirements
EN 13942-2003 石油和天然气工业　管道运输系统　管道阀门 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999, modified)
EN 13953-2003 液化石油气（LPG）用可运输、可再装油缸卸压阀 Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
EN 14189-2003 可运输气瓶 气瓶定期检查时对瓶阀的检查和维护 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
EN 144-1-2000+A1-2003 呼吸保护装置 气瓶阀 第1部分：插入式连接器用螺纹连接 Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector
EN 144-2-1998 呼吸保护装置 气瓶阀 第2部分：出口连接 Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections
EN 144-3-2003 呼吸保护装置 气瓶阀 第3部分：潜水气体硝基氧和氧气的出口连接 Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen
EN 1452-4-1999 供水塑料管道系统 硬聚氯乙烯(PVC-U) 第4部分：阀门和附属设备 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment
EN 1487-2000 建筑阀门 水压的安全类 试验和要求 Building valves - Hydraulic safety groups - Tests and requirements
EN 1488-2000 建筑阀门 膨胀类 试验和要求 Building valves - Expansion groups - Tests and requirements
EN 1489-2000 建筑阀门 压力安全阀门 试验和要求 Building valves - Pressure safety valves - Tests and requirements
EN 1490-2000 建筑阀门 兼有温度及卸压的组合阀 试验和要求 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 1491-2000 建筑筏门 膨胀阀 试验和要求 Building valves - Expansion valves - Tests and requirements
EN 1503-1-2000 阀门 阀体、阀帽和阀套用材料 第1部分：欧洲标准中规定的钢材 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
EN 1503-2-2000 阀门 阀体、阀帽和阀套用材料 第2部分：非欧洲标准规定的钢材 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
EN 1503-3-2000+AC-2001 阀门 阀体、阀帽和罩阀套用材料 第3部分：欧洲标准规定的铸铁 Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards
EN 1503-4-2002 阀门 阀体、阀帽和阀套用材料 第3部分：欧洲标准规定的铜合金 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
EN 1555-4-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第4部分：阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
EN 1567-1999 建筑阀门 减水压阀门和组合减水压阀门 要求和试验 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
EN 161-2001 气体燃烧器和燃气器具自动关闭阀 Automatic shut-off valves for gas burners and gas appliances
EN 1626-1999 低温容器 低温设备用阀门 Cryogenic vessels - Valves for cryogenic service
EN 1643-2000 气体燃烧器和气体设备自动关闭阀门的阀门检验系统 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
EN 1680-1997 塑料管道系统 聚乙烯(PE)管道系统用阀门 传动装置的弯曲时和弯曲后密封性的试验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
EN 1704-1997 塑料管道系统 热塑阀门 弯曲情况下温度周期变化后阀门完整性的试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
EN 1705-1996 塑料管道系统 热塑阀门 外部鼓风后阀门完整性试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
EN 1751-1998 建筑物通风 气路终端设备 阀与阀门的气动试验 Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves
EN 1759-3-2003 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第2部分：铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges
EN 1759-4-2003 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第4部分：铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
EN 1827-1999 呼吸保护装置 防止气体或气体和微粒或仅防颗粒的无吸入阀和带可分离过滤器的半掩面罩 要求、试验和标记 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
EN 19-2002 工业阀门 金属阀门的标志 Industrial valves - Marking of metallic valves
EN 1984-2000 工业阀门 钢制阀门 Industrial valves - Steel gate valves
EN 215-1-1987+AC1-1987 恒温散热阀 第1部分：要求和试验方法 Thermostatic radiator valves; Part 1: Requirements and test methods
EN 26189-1991 声学 用于听力保护的纯音气导阀听力测定 Acoustics; pure tone air conduction threshold audiometry for hearing conservation purposes (identical with ISO 6189:1983)
EN 26553-1991 自动蒸汽疏水阀 标志 Automatic steam traps-Marking (ISO 6553:1980)
EN 26554-1991 法兰连接自动蒸汽疏水阀 结构长度 Flanged automatic steam traps-Face-to-face dimensions (ISO 6554:1980)
EN 26704-1991 自动蒸汽疏水阀 分类 Automatic steam traps-Classification (ISO 6704:1982)
EN 26948-1991 自动蒸气疏水阀 产品试验和工作特性试验 Automatic steam traps-Production and performance characteristic tests (ISO 6948:1981)
EN 27841-1991 自动蒸汽疏水阀门 漏气量的测定 Automatic steam traps-Determination of steam loss- Test methods (ISO 7841:1988)
EN 27842-1991 自动蒸汽疏水阀门 排水量的测定 Automatic steam traps- Determination of discharge capacity- Test methods (ISO 7842:1988)
EN 28233-1990 热塑性塑料阀门 扭矩 试验方法 Thermoplastics valves- Torque; test method (ISO 8233:1988)
EN 28659-1990 热塑性塑料阀门 疲劳强度 试验方法 Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989)
EN 331-1998 建筑物燃气设备用人工操纵球阀和封闭底锥形旋塞阀 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 405-2001 呼吸保护设备 防气体或防气体和颗粒的阀滤式半面罩 要求、测试和标志 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
EN 417-2003 用于便携式灶具的、带或不带阀门的液化石油气用一次性金属气筒 制作、检验、测试和标志 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
EN 45510-7-1-1999 发电站设备、设备和系统的采购指南 第7-1部分：管道系统和阀门 高压管道系统 Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure piping systems
EN 45510-7-2-1999 发电站设备、设备和系统的采购指南 第7-2部分：管道系统和阀门 锅炉和高压管道阀 Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure piping valves
EN 488-2003 热水分配管道 地下热水网用预先绝热包覆的管道系统 成套钢铁管道设备的管阀门组件、聚氨酯热绝缘和聚乙 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 558-1-1995 工业阀门 法兰管系统使用的金属阀门面面间和中心与面间的尺寸 第1部分：PN标记的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves
EN 558-2-1995 工业阀门 法兰管系统使用的金属阀门面面间和中心与面间的尺寸 第2部分：级别标记的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves
EN 561-2002 气焊设备 焊接、切割和同类处理用断路阀门快速连接器 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
EN 593-1998 工业阀门 金属蝶阀 Industrial valves - Metallic butterfly valves
EN 60099-1-1994+A1-1999 避雷器　第1部分：交流系统用有间隙阀式避雷器　 Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems (IEC 60099-1:1991)
EN 60534-1-1993 工业过程控制阀　第1部分　控制阀术语和一般考虑 Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)
EN 60534-2-1-1998 工业过程控制阀　第2－1部分：流通能力　安装条件下流体流量的校准公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998)
EN 60534-2-3-1998 工业过程控制阀　第２部分：流通能力　第３节：试验规程 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)
EN 60534-2-5-2003 工业加工控制阀　第2-5部分：流量　 通过带级间恢复多级控制阀的流体尺寸方程　 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement notice
EN 60534-3-1-2000 工业过程控制阀　第３－１部分：尺寸　法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球型角型控制阀的 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000)
EN 60534-3-2-2001 工业过程控制阀　第３部分：尺寸　第２节：无法兰控制阀（薄型蝶阀除外）的端面间距尺寸 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)
EN 60534-3-3-1998 工业过程控制阀　第三部分：尺寸　对接焊接　两向　球型　垂直模式控制阀的末端对末端尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)
EN 60534-6-1-1997 工业过程控制阀　第6－1部分：定位器联到控制阀执行机构的安装细则　第1节：直线传动装置上调节器的安装 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)
EN 60534-6-2-2001 工业过程控制阀　第6－2部分：定位器联到控制阀执行机构的安装细则　环形执行机构定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)
EN 60534-8-1-2000 工业过程控制阀　第8部分：噪声的考虑　第1节：气动流流径控制阀产生的噪声的实验室测量 Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)
EN 60534-8-2-1993 工业过程控制阀　第8部分　噪声考虑　第2节通过控制阀的流体产生的噪声的实验室测量报法 Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991)
EN 60534-8-3-2000 工业流程控制阀　.第8-3部分　噪声问题　通过控制阀的动力噪声预测法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000)
EN 60534-8-4-1994 工业过程控制阀　第8部分：噪声问题　第4节：流动产生的噪声的预测 Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)
EN 60700-1-1998+A12003 高压直流(HVDC)电力传输半导体闸流阀　第1部分：电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:1998)
EN 60730-2-19-2002 家用和类似用途的电气自动化控制器 2-19部分：电动油阀的特殊要求（包括机械要求） Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 + A1:2000, modified)
EN 60730-2-8-2002 家用和类似用途的电气自动控制器　 第２－８部分：电动水阀的特殊要求　包括机械要求 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000, modified) / Note: Endorsement notice
EN 60896-2-1996 固定式铅酸蓄电池　一般要求和试验方法　第2部分：阀门调节型 Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types (IEC 60896-2:1995)
EN 61056-1-2003 一般用铅酸蓄电池(阀调节型)　第1部分：一般要求、功能特性　试验方法 General purpose lead-acid batteries (valve regulated types) - Part 1: General requirements, functional characteristics, methods of test (IEC 61056-1:2002) / Note: Endorsement notice
EN 61056-2-2003 一般用铅酸蓄电池(阀调节型)　第2部分：尺寸、端子和标记 General purpose lead-acid batteries (valve regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002) / Note: Endorsement notice
EN 61514-2002 工业过程控制系统　气动输出阀门定位器性能评定方法 Industrial-process controll systems - Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 61514:2000, modified)
EN 61954-1999+A1-2003 输电和配电系统用电力电子设备　静态无功功率补偿器用晶闸管阀的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators (IEC 61954:1999)
EN 629-1-1996 可运输气瓶 连接气瓶阀门用的25E锥螺纹 第1部分：规范 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 1: Specification
EN 629-2-1996 可运输气瓶 连接气瓶阀门的25E锥螺纹 第2部分：量规检验 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection
EN 736-1-1995 阀门 术语 第1部分：阀门类型定义 Valves - Terminology - Part 1: Definition of types of valves
EN 736-2-1997 阀门 术语 第2部分：阀门组件定义 Valves - Terminology - Part 2: Definition of components of valves
EN 736-3-1999+A1-2001 阀门 术语 第3部分：术语定义 Valves - Terminology - Part 3: Definition of terms
EN 738-3-1998+A1-2002 医用气体用压力调节器 第3部分：带气瓶阀的压力调节器 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
EN 816-1996 卫生间水开关制品 自动切断阀PN 10 Sanitary tapware - Automatic shut-off valves PN 10
EN 849-1996+A1-1999+A2-2001 可移动气瓶 气瓶阀 规范和定型测试 Transportable gas cylinders - Cylinder valves - Specification and type testing
EN 850-1996+A1-2000+AC-1998 可移动气瓶 医用枢接轭状阀门出口接头 Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use
EN 88-1991+A1-1996 入口压力200毫巴以下的燃气器具的压力调节阀 Pressure governors for gas appliances for inlet pressures up to 200 mbar
EN 88/prA2-2001 入口压力200毫巴以下的燃气器具的压力调节阀 修改A2 Pressure governors for gas appliances for inlet pressures up to 200 mbar; Amendment prA2
EN 917-1997 塑料管系统 热塑阀门 抗内压和泄漏密封性的试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
EN 962-1996+A1-1999+A2-2000 可运输气瓶 工业和医用气瓶用阀保护帽和阀罩 设计、建造和试验 Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
EN ISO 10432-1999 石油和天然气工业　下降孔设备　地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999)
EN ISO 10692-1-2001 气瓶　微电子工业用气瓶阀接头　第1部分：出口接头 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001)
EN ISO 10692-2-2001 气瓶　微电子工业用气瓶阀接头　第2部分：气瓶阀接头的规范和定型试验 Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001)
EN ISO 11114-1-1997+AC-1998 可运输气瓶　气瓶和瓶阀材料与盛装气体的相容性　第1部分：金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997)
EN ISO 11114-2-2000 可运输气瓶　气瓶和瓶阀材料与盛装气体的相容性　第2部分：非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000)
EN ISO 11114-3-1997 可运输气瓶　气瓶和瓶阀材料与盛装气体的相容性　第3部分：氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997)
EN ISO 11116-1-1999 气瓶　气瓶与瓶阀连接用17E锥螺纹　第1部分：规范 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specifications (ISO 11116-1:1999)
EN ISO 11116-2-1999 气瓶　气瓶与瓶阀连接用17E锥螺纹　第2部分：检验量规 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999)
EN ISO 12209-1-2000 气瓶　压缩可呼吸空气用气瓶阀的放气连接器　第1部分：轭型连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000)
EN ISO 12209-2-2000 气瓶　压缩可呼吸空气用气瓶阀的放气连接器　第2部分：螺纹式连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000)
EN ISO 12209-3-2000 气瓶　压缩可呼吸空气用气瓶阀的放气连接器　第3部分：230 bar 阀适配器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000)
EN ISO 13340-2001 可运输气瓶　不可再充填的气瓶用瓶阀　规范和原型试验 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001)
EN ISO 13341-1997+AC-1998 可运输气瓶　气瓶阀的装配 Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997)
EN ISO 13758-1996 液化石油气　评价丙烷干燥度　阀冻结法 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996)
EN ISO 14246-2001 可运输气瓶　气瓶阀门　生产试验和检验 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001)
EN ISO 14723-2001 石油和天然气工业　管道输送系统　海底管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001)
EN ISO 15245-1-2001 气瓶　连接气瓶阀门的平行螺纹　第1部分：规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001)
EN ISO 15245-2-2001 气瓶　连接气瓶阀门的平行螺纹　第2部分：量规检验 Gas cylinders - Parallel threads for correction of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001)
EN ISO 15364-2001 船舶与海上技术　散货船真空/压力阀 Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000)
EN ISO 15761-2002 石油及天然气工业用DN100及较小的钢闸阀 、球阀和防逆阀　 Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002)
EN ISO 3822-2-1995 声学　供水设施的装置和设备发射的噪音的实验室测定　第2部分：放水龙头和混合阀的安装和工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
EN ISO 3822-3-1997 声学　供水设施的装置和设备发射的噪音的实验室测定　第3部分：管路阀门和器件的安装和工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
EN ISO 5135-1998 声学　在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)
EN ISO 5210-1996 通用阀门　多回转阀门驱动装置的连接 Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991)
EN ISO 5211-2001 通用阀门　转动零件的激励附件 Industrial valves - Part-turn actuator attachments (ISO 5211:2001)
HD 1215.2-1988+AC1-1989 热静力散热器阀门　第2部分：尺寸和连接细节 Thermostatic radiator valves; part 2: dimensions and details on connection
prEN 1074-6-2003 供水阀门 目的要求的适应性和合适的认证试验 第6部分：消防栓 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
prEN 12094-4-2001 固定式消防系统　气体灭火系统的部件　第4部分：对高压容器阀组件及其驱动器的要求及试验方法 Fixed fire fighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for high pressure container valve assemblies and their actuators
prEN 12116-1995 工业阀门　部分回流阀驱动附件 Industrial valves - Part-turn valve actuator attachment
prEN 12259-9-1999 固定消防系统　喷水器和喷水系统构件　第9部分：集水阀 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge valves
prEN 12266-3-1995 工业阀门　交货技术条件　第3部分：试验程序和验收标准 Industrial valves - Technical conditions of delivery - Part 3: Test procedures and acceptance criteria
prEN 12516-1-2000 工业阀门　壳体设计强度　第1部分：钢阀门壳体的列表法 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
prEN 12516-2-2000 工业阀门　壳体设计强度　第２部分：钢阀门壳体的计算法 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
prEN 13327-1998 工业阀门 热塑性材料止回阀 Industrial valves - Check valves of thermoplastics materials
prEN 13547-2002 工业阀门 铜合金球阀 Industrial valves - Copper alloy ball valves
prEN 13617-3-2000 加油站 第3部分：剪切阀构造和性能 Petrol filling stations - Part 3: Construction and performance of shear valves
prEN 13786-1999 用于丁烷、丙烷或其混和物的、最大出口压力小于等于4bar的、流量最大可达100kg/h（包括100kg/h）的自动转换 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
prEN 13959-2000 公称压力在DN6至DN250（含DN250）的防污染控制阀　E族A、B、C和D型 Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D
prEN 14055-1-2000 公厕冲洗池　第1部分：带内溢流和阀门排水口装置的冲洗池 WC flushing cisterns - Part 1: Flushing cisterns with internal overflow and valve outlet mechanism
prEN 14071-2000 液化石油气（LPG）罐的减压阀　辅助设备 Pressure relief valves for LPG tanks - Ancillary equipment
prEN 14124-2001 有内溢流的冲洗池的进水阀 Inlet valves for flushing cisterns with internal overflow
prEN 14129-2001 液化石油汽（LGP）罐压力调节阀 Pressure relief valves for LPG tanks
prEN 14141-2003 天然气管道输送阀 试验和性能要求 Valves for natural gas transportation in pipelines - Performance requirements and tests
prEN 14341-2001 工业阀 钢防逆阀 Industrial valves - Steel check valves
prEN 14432-2002 危险货物运输罐 液态化工产品运输的罐设备 产品排放和进气阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves
prEN 14433-2002 危险货物运输罐 液态化工产品运输的罐设备 底阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Footvalves
prEN 14451-2002 饮用水的防回流污染装置 包括公称压力在DN8-DN80内的管路反压阀 D族 A型 Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 inclusive - Family D, type A
prEN 14455-2002 饮用水的防回流污染装置 包括公称压力在DN15-DN50内的压缩空气进气阀 L族 A型和B型 Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 inclusive - Family L, type A and type B
prEN 1456-4-1994 地上和地下污废水压力排放用塑料管道系统 硬已烯(聚氯已烯)(PVC-U) 第4部分：阀门及辅助设备 Plastics piping systems for underground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment
prEN 1531-1994 包括启动气阀的调节气阀 Modulating gas valves including start gas valves
prEN 1759-1-2000 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第1部分：钢法兰NPS1/2到24 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 1: Steel flanges, NPS 1/2 to 24
prEN 1983-2002 工业钢球阀 Industrial valves - Steel ball valves
prEN 215-2-1986 恒温散热阀 第2部分：连接尺寸和细节 Thermostatic radiator valves; part 2: dimensions and details on connection
prEN 332-1990 压力不超过PN 0,2 和压力为DN 15 至DN 50间的家用气体装置用封闭底人工操纵金属锥形旋塞关闭阀 Manually operated metallic taper plug shut-off valves with closed bottom for domestic gas installations for pressures up to PN 0,2 and with DN 15 to DN 50
prEN 333-1990 压力不超过PN 4 和压力为DN 15 至DN 50间的家用气体装置用人工操纵金属球关闭阀 Manually operated metallic ball shut-off valves for domestic gas installations up to PN 4 and with DN 15 to DN 50
prEN 45511-1994 采购指南 电气设备阀 开关设备和控制装置 Guide for procurement - Electrical equipment - Switchgear and controlgear
prEN 45512-1994 采购指南 管道系统和阀 包括安全阀的锅炉和高压管道阀 Guide for procurement - Pipework and valves - Boiler and high pressure piping valves including safety valves
prEN 45513-1994 采购指南 管道系统和阀 包括支架的高压管线 Guide for procurement - Pipework and valves - High pressure piping including supports
prEN 50105-1992 固定式铅酸蓄电池组　一般要求和试验方法　阀门调节类型 Stationary lead-acid batteries; general requirements and test methods; valve regulated types
prEN 558-3-1991 法兰管系统使用的金属阀门 面面间和中心与面间的尺寸 第3部分：级别标记的阀门 Metal valves for use in flanged pipe systems; face-to-face and centre-to-face dimensions; part 3: class-designation valves
prEN 593-2003 工业阀门 金属蝶阀 Industrial valves - Metallic butterfly valves / Note: Intended as replacement for EN 593 (1998-01).
prEN 60534-4-1998 工业过程控制阀　第４部分：检验和常规试验　草案 IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing
prEN 628-1992 气瓶 连接25.8mm公称直径气瓶阀门用的锥形螺纹量规检测要求 Gas cylinders; requirements for gauge inspection of tapered threads for connection of valves to gas cylinders of 25.8 mm nominal diameter
prEN ISO 10297-2002 可运输的气瓶　阀门　规范及定型试验 Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO/DIS 10297:2002)
prEN ISO 10434-2002 石油和天然气工业用螺栓帽状钢闸阀 Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002)
prEN ISO 10497-2002 阀门试验　阀门耐火试验要求　 Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2002)
prEN ISO 11219-1996 气瓶　气瓶与瓶阀连接用17E锥螺纹　检验量规 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges (ISO/DIS 11219:1996)
prEN ISO 14617-8-2002 图表用图形符号　第8部分：阀及挡板 Graphical symbols for diagrams - Part 8: Valves and dampers (ISO/FDIS 14617-8:2002)
prEN ISO 16135-2001 工业用阀门　热塑性材料制球阀 Industrial valves - Ball valves of thermoplastic materials (ISO/DIS 16135:2001)
prEN ISO 16136-2001 工业用阀门　热塑性材料制蝶阀 Industrial valves - Butterfly valves of thermoplastic materials (ISO/DIS 16136:2001)
prEN ISO 16137-2001 工业用阀门　热塑性材料制防逆阀 Industrial valves - Check valves of thermoplastic materials (ISO/DIS 16137:2001)
prEN ISO 16138-2001 工业用阀门　热塑性材料制隔膜阀 Industrial valves - Diaphragm valves of thermoplastic materials (ISO/DIS 16138:2001)
prEN ISO 16139-2000 工业用阀门　热塑性材料制闸阀 Industrial valves - Gate valves for thermoplastic materials (ISO/DIS 16139:2000)
prEN ISO 17292-2002 石油、石油化工及相关工业用金属球阀 Metal ball valves for petroleum, petrochemical and allied industries (ISO/DIS 17292:2002) / Note: Endorsement notice
prEN ISO 21787-2001 工业阀门　热塑塑料制球阀 Industrial valves - Globe valves of thermoplastic materials (ISO/DIS 21787:2001)
prEN ISO 407-2001 小型医用气瓶　针导轭式阀连接 Small medical gas cylinders - PIN-index yoke-type valve connections (ISO/DIS 407:2001)
prEN ISO 4126-1-2003 防止过压防护的安全装置 第1部分：安全阀 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO/FDIS 4126-1:2003)
prEN ISO 4126-4-2003 保护额外压力的安全设备　第4部分：飞行员操作安全阀 Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003)
中国阀标准(GB valve standards)

--------------------------------------------------------------------------------
编号 中文名称 英文名称
JB/T 58351-1999 气动换向阀可靠性考核规范 ()
DL/T 1068-2007 水轮机进水液动碟阀选用、试验及验收导则 Specification for hydraulic operation butterfly valve selection,test and acceptance of hydraulic turbine inlet
DL/T 530-1994(2005) 水力除灰排渣阀技术条件 ()
DL/T 531-1994(2005) 电站高温高压截止阀、闸阀技术条件 ()
DL/T 637-1997(2005) 阀控式密封铅酸蓄电池订货技术条件 ()
DL/T 641-2005 电站阀门电动执行机构 ()
DL/T 642-1997(2005) 隔爆型阀门电动装置 ()
DL/T 716-2000 电站隔膜阀选用导则 ()
DL/T 746-2001 电站蝶阀选用导则 ()
DL/T 748.3-2001 火力发电厂锅炉机组检修导则 第3部分：阀门与汽水管道系统检修 ()
DL/T 906-2004 仓泵进、出料阀 ()
DL/T 922-2005 火力发电用钢制通用阀门订货、验收导则 ()
DL/T 923-2005 火力发电用止回阀技术条件 ()
DL/T 959-2005 电站锅炉安全阀应用导则 ()
DL/T1010.2-2006 高压静止无功补偿装置第2部分: 晶闸管阀试验 ()
GB 10869-1989 电站调节阀技术条件 Specification of control valves for fossil power stations
GB 10877-1989 氧气瓶阀 Valves for oxygen cylinders
GB 10879-1989 溶解乙炔气瓶阀 Valves for dissolved acetylene cylinders
GB 13438-1992 氩气瓶阀 Valves for argon cylinders
GB 13439-1992 液氯瓶阀 Valves for liquid chlorine cylinders
GB 14103-1993 卤代烷灭火系统选择阀性能要求和试验方法 Halon fire extinguishing systems--Performance requirements and test methods for selector valves
GB 14104-1993 卤代烷灭火系统单向阀的性能要求和试验方法 Halon fire extinguishing systems--Performance requirements and test methods for check valves
GB 14105-1993 卤代烷灭火系统阀驱动器性能要求和试验方法 Halon fire extinguishing systems--Performance requirements and test methods for valve actuators
GB 14536.19-2006 家用和类似用途电自动控制器 电动燃气阀的特殊要求，包括机械要求 Automatic electrical controls for household and similar use - Particular requirements for electrically operated gas valves, including mechanical requirements
GB 14536.9-1996 家用和类似用途电自动控制器电动水阀的特殊要求(包括机械要求) Automaticelectrical controls for household and similar use--Particular requirements for electrically operated water valves，including mechanical requirements
GB 15382-1994 气瓶阀通用技术条件 General technique specifications for cylinder valves
GB 15383-1994 气瓶阀出气口连接型式和尺寸 Outlet connection types and sizes for cylinder valves
GB 15930-2007 建筑通风和排烟系统用防火阀门 ()
GB 17447-1998 气雾剂阀门 Aerosol valve
GB 17877-1999 液氨瓶阀 Valves for liquid ammonia cylinders
GB 17878-1999 工业用非重复充装瓶阀 Non-refillable cylinder valve for industry
GB 17926-1999 车用压缩天然气瓶阀 Valves for compression natural gas cylinders for vehicles
GB 18299-2001 机动车用液化石油气钢瓶集成阀 Automotive LPG steel cylinder multivalve
GB 5135.2-2003 自动喷水灭火系统第2部分: 湿式报警阀、延迟器、水力警铃 Automatic sprinkler system--Part 2:Wet system alarm valves，retard chamber，water motor alarm
GB 5135.4-2003 自动喷水灭火系统第4部分: 干式报警阀 Automatic sprinkler system--Part4: Dry pipe valves
GB 5135.5-2003 自动喷水灭火系统第5部分: 雨淋报警阀 Automatic sprinkler system--Part5: Deluge alarm valves
GB 5135.6-2003 自动喷水灭火系统第6部分: 通用阀门 Automatic sprinkler system--Part 6: Convention valve
GB 7327-1987 交流系统用碳化硅阀式避雷器 Silicon carbide surge arresters for A.C.systems
GB 7512-2006 液化石油气瓶阀 Valves for liquefied petroleum gas cylinders
GB 795-1989 卤代烷灭火系统容器阀性能要求和试验方法 Halon fire extinguishing systems--Performance requirements and method of test for container valves
GB/T 10844-2007 船用电液伺服阀通用技术条件 ()
GB/T 10868-2005 电站减温减压阀 Steam converting valve for power stations
GB/T 11691-1989 铸钢吸入通海阀(四进位) Cast steel suction sea valves
GB/T 11692-1989 青铜吸入通海阀(四进位) Bronze suction sea valves
GB/T 11698-1989 船用法兰连接金属阀门的结构长度 Metal valves for use in marine flanged pipe systems--Face-to-face and centre-to-face dimensions
GB/T 12220-1989 通用阀门标志 General purpose industrial valves--Marking
GB/T 12221-2005 金属阀门结构长度 Metal valves-Face to face,end to end,center to face and center to end dimensions
GB/T 12222-2005 多回转阀门驱动装置的连接 Multi-turn valve actuator attachments
GB/T 12223-2005 部分回转阀门驱动装置的连接 Part-turn valve actuator attachments
GB/T 12224-2005 钢制阀门一般要求 General requirements for industrial steel valves
GB/T 12225-2005 通用阀门铜合金铸件技术条件 General purpose industrial valves-Specification of copper alloy castings
GB/T 12226-2005 通用阀门灰铸铁件技术条件 General purpose industrial valve-Specification of flake graphite iron castings
GB/T 12227-2005 通用阀门球墨铸铁件技术条件 General purpose industrial valve-Specification of spheroidal graphite iron castings
GB/T 12228-2006 通用阀门 碳素钢锻件技术条件 General purpose industrial valves - Specification of carbon steel forgings
GB/T 12229-2005 通用阀门碳素钢铸件技术条件 General Purpose industrial valves-Specification of carbon steel castings
GB/T 12230-2005 通用阀门不锈钢铸件技术条件 General purpose industrial valves-Specification of stainless steel castings
GB/T 12232-2005 通用阀门法兰连接铁制闸阀 General purpose industrial valves Flanged iron gate valves
GB/T 12233-2006 通用阀门 铁制截止阀与升降式止回阀 General purpose industrial valves - Casting iron globe valves and lift check valves
GB/T 12234-2007 石油、天然气工业用螺柱连接阀盖的钢制闸阀 ()
GB/T 12235-2007 石油、石化及相关工业用钢制截止阀和升降式止回阀 ()
GB/T 12236-1989 通用阀门钢制旋启式止回阀 General purpose industrial valves--Steel swing check valves
GB/T 12237-2007 石油、石化及相关工业用的钢制球阀 ()
GB/T 12238-1989 通用阀门法兰和对夹连接蝶阀 General purpose industrial valves--Flanged and wafer butterfly valves
GB/T 12239-1989 通用阀门隔膜阀 General purpose industrial valves--Diaphragm valves
GB/T 12240-1989 通用阀门铁制旋塞阀 General purpose industrial valves--Iron plug valves
GB/T 12241-2005 安全阀一般要求 Safety Valves-General Requirements
GB/T 12243-2005 弹簧直接载荷式安全阀 Spring loaded safety valves
GB/T 12244-2006 减压阀 一般要求 General requirements for pressure reducing valves
GB/T 12245-2006 减压阀 性能试验方法 Methods of performance test for pressure reducing valves
GB/T 12246-2006 先导式减压阀 Pilot operated pressure reducing valves
GB/T 12247-1989 蒸汽疏水阀分类 Automatic steam traps--Classification
GB/T 12250-2005 蒸汽疏水阀术语、标志、结构长度 Automatic steam traps-Term、Marking、Face-to-face dimensions
GB/T 12251-2005 蒸汽疏水阀试验方法 Automatic steam traps-Test methods
GB/T 1241-1983 船用外螺纹锻钢截止止回阀 Marine forged steel male thread stop and check valves
GB/T 12712-1991 蒸汽供热系统凝结水回收及蒸汽疏水阀技术管理要求 The requirements for supervision of recovery of condensate from steam heating system and technique ofautomatic steam traps
GB/T 12773-1991 内燃机气阀钢钢棒技术条件 Valve steel bars for internal combustion engines--Technical requirements
GB/T 13852-1992 船用液压控制阀技术条件 General specification of hydraulic control valves for ship
GB/T 13854-1992 射流管电液伺服阀 Jet-pipe electrohydraulic servo valve
GB/T 13927-1992 通用阀门压力试验 Pressure testing for general purpose valves
GB/T 13932-1992 通用阀门铁制旋启式止回阀 General purpose industrial valves--Cast iron swing check valves
GB/T 14043-2005 液压传动阀安装面和插装阀阀孔的标识代号 Hydraulic fluid power-Code for identification of valve mounting surfaces and cartridge valve cavities
GB/T 14087-1993 船用空气瓶安全阀 Safety valves for marine air vessel
GB/T 14478-1993 大中型水轮机进水阀门基本技术条件 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
GB/T 15185-1994 铁制和铜制球阀 Cast iron and copper alloy ball valves
GB/T 15623.1-2003 液压传动电调制液压控制阀第1部分:四通方向流量控制阀试验方法 Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 1:Test methods for four-way directional flow control valves
GB/T 15623.2-2003 液压传动电调制液压控制阀第2部分:三通方向流量控制阀试验方法 Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 2:Test methods for three-way directional flow control valves
GB/T 16859-1997 阀器件堆、装置和电力变流设备的端子标记 Terminal marking for valve device stacks and assemblies and for power convertor equipment
GB/T 17213.1-1998 工业过程控制阀第1部分:控制阀术语和总则 Industrial-process control valves--Part 1:Control valve terminology and general considerations
GB/T 17213.10-2005 工业过程控制阀第2-4部分：流通能力固有流量特性和可调比 Industrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability
GB/T 17213.11-2005 工业过程控制阀第3-2部分：尺寸角行程控制阀(蝶阀除外)的端面距 Industrial-process control valves Part 3-2:Dimensions-Face-to-face dimensions for rotary control valves except butterfly valves
GB/T 17213.12-2005 工业过程控制阀第3-3部分：尺寸对焊式两通球形直通控制阀的端距 Industrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves
GB/T 17213.13-2005 工业过程控制阀第6-2部分：定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 Industrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators
GB/T 17213.14-2005 工业过程控制阀第8-2部分：噪声的考虑 实验室内测量液动流流经控制阀产生的噪声 Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves
GB/T 17213.15-2005 工业过程控制阀第8-3部分：噪声的考虑空气动力流流经控制阀产生的噪声预测方法 Industrial-process control valves Part 8-3:Noise considerations-Control valve aerodynamic noise prediction method
GB/T 17213.16-2005 工业过程控制阀第8-4部分：噪声的考虑液动流流经控制阀产生的噪声预测方法 Industrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow
GB/T 17213.2-2005 工业过程控制阀第2-1部分：流通能力安装条件下流体流量的计算公式 Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions
GB/T 17213.3-2005 工业过程控制阀第3-1部分：尺寸两通球形直通控制阀法兰端面距和两通球形角形控制阀法兰中心至法兰端面的间 Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves
GB/T 17213.4-2005 工业过程控制阀第4部分：检验和例行试验 Industrial-process control valves Part 4:Inspection and routine testing
GB/T 17213.5-1998 工业过程控制阀第5部分:标志 Industrial-process control valves--Part 5:Marking
GB/T 17213.6-2005 工业过程控制阀第6-1部分：定位器与控制阀执行机构连接的安装细节定位器在直行程执行机构上的安装 Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators
GB/T 17213.7-1998 工业过程控制阀第7部分:控制阀数据单 Industrial-process control valves--Part 7:Control valve data sheet
GB/T 17213.8-1998 工业过程控制阀第8部分:噪声的考虑第1节:实验室内测量空气动力流流经控制阀产生的噪声 Industrial-process control valves--Part 8:Noise considerations--Section 1:Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T 17213.9-2005 工业过程控制阀第2-3部分：流通能力试验程序 Industrial-process control valves Part 2-3:Flow capacity-Test procedures
GB/T 17487-1998 四油口和五油口液压伺服阀安装面 Hydraulic fluid power--Four-and five-port servovalves--Mounting surfaces
GB/T 17490-1998 液压控制阀油口、底板、控制装置和电磁铁的标识 Hydraulic fluid power--Identification of valve ports，subplates，control devices and solenoids
GB/T 1850-1984 船用外螺纹重块式快关阀 Marine male threaded weight quick-closing valves
GB/T 1852-1993 船用法兰铸钢蒸汽减压阀 Marine steel flanged steam pressure reducing valves
GB/T 1853-1994 船用法兰铸钢舷侧截止止回阀 Marine flanged cast steel over board stop check valve
GB/T 1854-1993 船用法兰铸铁单排吸入截止阀箱 Marine flanged cast iron single arrangement suction stop box valve
GB/T 1855-1993 船用法兰铸铁单排吸入截止止回阀箱 Marine flanged cast iron single arrangement suction stop check box valve
GB/T 1856-1993 船用法兰铸铁单排排出截止阀箱 Marine flanged cast iron single arrangement exhaust stop box valve
GB/T 18688-2002 农业灌溉设备灌溉阀的压力损失试验方法 Agricultural irrigation equipment--Pressure losses in irrigation valves--Test method
GB/T 18689-2002 农业灌溉设备小型手动塑料阀 Agricultural irrigation equipment--Manually operated small plastics valves
GB/T 18691-2002 农业灌溉设备止回阀 Agricultural irrigation equipment--Check valves
GB/T 18693-2002 农业灌溉设备浮子式进排气阀 Agricultural irrigation equipment--Float type air release valves
GB/T 19230.5-2003 评价汽油清净剂使用效果的试验方法第5部分: 汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机 Test method for evaluating gasoline detergent in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method)
GB/T 19230.6-2003 评价汽油清净剂使用效果的试验方法第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台 Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method)
GB/T 19278-2003 热塑性塑料管材、管件及阀门通用术语及其定义 General terms and their definitions of thermoplastic pipes，fittings and valves
GB/T 1951-1984 船用低压外螺纹青铜截止阀 Marine low pressure bronze male threaded stopvalves
GB/T 1952-1980 船用低压外螺纹青铜止回阀 Low bressure bronze male screw-thread check valve for marine use
GB/T 1953-1984 船用低压外螺纹青铜截止止回阀 Marine low pressure bronze male threaded stop check valves
GB/T 19638.2-2005 固定型阀控密封式铅酸蓄电池 Lead-acid Batteries For Stationary Valve-Regulated
GB/T 19639.1-2005 小型阀控密封式铅酸蓄电池技术条件 Technical conditions of small-sized valve-regulated lead-acid batteries
GB/T 19672-2005 管线阀门技术条件 Specification of pipeline valves
GB/T 19699-2005 船舶与海上技术货油舱压力/真空阀 Ships and marine technology-Pressure/vacuum valves for cargo tanks
GB/T 19793-2005 农业灌溉设备水动灌溉阀 Agricultural irrigation equipment-Hydraulically operated irrigation valves
GB/T 19794-2005 农业灌溉设备定量阀技术要求和试验方法 Agricultural irrigation equipment-Volumetric valves-General requirements and test methods
GB/T 20063.8-2006 简图用图形符号 第8部分：阀与阻尼器 Graphical symbols for diagrams -Part 8: Valves and dampers
GB/T 20063.8-2006 简图用图形符号 第8部分：阀与阻尼器 Graphical symbols for diagrams -Part 8: Valves and dampers
GB/T 20081.1-2006 气动减压阀和过滤减压阀 第1部分:商务文件中应包含的主要特性和产品标识要求 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
GB/T 20081.2-2006 气动减压阀和过滤减压阀 第2部分:评定商务文件中应包含的主要特性的测试方法 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
GB/T 20173-2006 石油天然气工业管道输送系统管道阀门 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
GB/T 2029-1980 铸钢吸入通海阀 Cast steel suction valve for seaward sluice
GB/T 2030-1980 青铜吸入通海阀 Bronze suction valve for seaward sluice
GB/T 20639-2006 有间隙阀式避雷器人工污秽试验 Artificial pollution testing of non-linear resistor type gapped arresters
GB/T 20839.2-2007 小型阀控密封式铅酸蓄电池 产品分类 ()
GB/T 20910-2007 热水系统用温度压力安全阀 ()
GB/T 20990.1-2007 高压直流输电晶闸管阀 第1部分：电气试验 ()
GB/T 20995-2007 输配电系统的电力电子技术 静止无功补偿装置用晶闸管阀的试验 ()
GB/T 21229-2007 声学 风道末端装置、末端单元、风道闸门和阀噪声声功率级的混响室测定
GB/T 2499-1993 船用法兰铸铁双排截止阀箱 Marine cast iron flange dual-row stop valves-case
GB/T 2514-1993 四油口板式液压方向控制阀安装面 Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
GB/T 2877-2007 液压二通盖板式插装阀 安装连接尺寸 ()
GB/T 3036-1994 船用中心型蝶阀 Marine center-pivoted butterfly valves
GB/T 3037-1994 船用双偏心型蝶阀 Marine duo-eccentric-pivoted butterfly valves
GB/T 4213-1992 气动调节阀 Pneumatic industrial process control valves
GB/T 5744-1993 船用快关阀 Quick shutting valve for marine use
GB/T 5771-1986 柴油机喷油泵出油阀偶件技术条件 Technical specification for delivery valves of fuel injection pumps of diesel engines
GB/T 584-1999 船用法兰铸钢截止阀 Marine cast steel flanged stop valves
GB/T 585-1999 船用法兰铸钢截止止回阀 Marine cast steel flangedstop check valves
GB/T 586-1999 船用法兰铸钢止回阀 Marine cast steel flanged check valves
GB/T 587-1993 船用法兰青铜截止阀 Marine bronze flanged stop valves
GB/T 588-1993 船用法兰青铜截止止回阀 Marine bronze flanged stop check valves
GB/T 589-1993 船用法兰青铜止回阀 Marine bronze flanged check valves
GB/T 590-1993 船用法兰铸铁截止阀 Marine cast iron flanged stop valves
GB/T 591-1993 船用法兰铸铁截止止回阀 Marine cast iron flanged stop check valves
GB/T 592-1993 船用法兰铸铁止回阀 Marine cast iron flanged lift check valves
GB/T 594-1983 船用外螺纹锻钢截止阀 Marine forged steel male thread stop valves
GB/T 595-1983 船用外螺纹青铜截止阀 Marine bronze male thread stop valves
GB/T 596-1983 船用外螺纹青铜截止止回阀 Marine bronze male thread stop and check valves
GB/T 597-1983 船用外螺纹青铜止回阀 Marine bronze male thread lift check valves
GB/T 600-1991 船舶管路阀件通用技术条件 General specifications for marine piping valves and fittings
GB/T 6567.4-1986 管路系统的图形符号阀门和控制元件 Graphical symbols for piping systems--Valves and control regulation actuators
GB/T 6567.5-2003 管路系统的图形符号管路、管件和阀门等图形符号的轴测图画法 Graphical symbols for piping systems--Axonometric representation of graphical symbols for piping，piping accessories and valves etc
GB/T 7404.2-2000 内燃机车用阀控密封式铅酸蓄电池 Vavle regulated lead-acid batteries for diesel locomotives
GB/T 7934-1987 二通插装式液压阀技术条件 Hydraulic fluid power--Two-port slip-in cartridge valves--Cavities--Technical requirements
GB/T 7940.1-2001 气动五气口方向控制阀第1部分:不带电气接头的安装面 Pneumatic fluid power--Five-port directional control valves--Part 1:Mounting interface surfaces without electrical connector
GB/T 7940.2-2001 气动五气口方向控制阀第2部分:带电气接头的安装面 Pneumatic fluid power--Five-port directional control valves--Part 2:Mounting interface surfaces with optional electrical connector
GB/T 7940.3-2001 气动五气口方向控制阀第3部分:功能识别编码体系 Pneumatic fluid power--Five-port directional control valves--Part 3:Code system for communication of valve functions
GB/T 8098-2003 液压传动带补偿的流量控制阀安装面 Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
GB/T 8099-1987 液压叠加阀安装面 Hydraulic fluid power--Modular stack valves--Mountingsurfaces
GB/T 8100-2006 液压传动减压阀、顺序阀、卸荷阀、节流阀和单向阀安装面 Hydraulic fluid power―Pressure-reducing valves,sequence valves,unloading valves,throttle valves and check valves―Mounting surfaces
GB/T 8101-2002 液压溢流阀安装面 Hydraulic fluid power--Pressure-relief valves--Mounting surfaces
GB/T 8104-1987 流量控制阀试验方法 Hydraulic fluid power--Valves--Testing method of flow control valves
GB/T 8105-1987 压力控制阀试验方法 Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T 8106-1987 方向控制阀试验方法 Hydraulic fluid power--Valves--Testing method of directional control valves
GB/T 8107-1987 液压阀压差流量特性试验方法 Hydraulic fluid power--Valves--Method of determining pressure diffrential--Flow characteristics
GB/T 8243.2-2003 内燃机全流式机油滤清器试验方法第2部分: 滤芯旁通阀特性 Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 2: Element by-pass valve characteristics
GB/T 8243.9-2006 内燃机全流式机油滤清器试验方法 第9部分：进、出口止回阀试验 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
GB/T 8464-1998 水暖用内螺纹连接阀门 Valves with female screw ends for water-heatingsystem
HG 3157-2005 液化气体罐车用弹簧安全阀 ()
HG 3158-2005 液化气体罐车用紧急切断阀 ()
HG/T 21551-1995 柱塞式放料阀 ()
HG/T 2434-2005 搪玻璃阀门技术条件 ()
HG/T 2482-1993 气相稳流阀技术条件 ()
HG/T 2737-2004 玻璃纤维增强聚丙烯球阀 ()
HG/T 3215-1986 聚三氟氯乙烯塑料衬里截止阀 ()
HG/T 3235-2006 橡胶机械用气动二位四通滑阀 Pneumatic two-position four-way slide valve for rubber machinery
HG/T 3236-2006 橡胶机械用气动二位切断阀 Pneumatic shut-off control valves for rubber machinery
HG/T 3237-2006 橡胶机械用自力式压力调节阀 Self-operated pressure regulators for rubber machinery
HG/T 3692-2001 金属膜片式稳压阀技术条件 ()
HG/T 3693-2001 橡胶膜片式稳压阀技术条件 ()
HG/T 3704-2003 氟塑料衬里阀门通用技术条件 ()
HG/T 3732-2004 改性酚醛玻璃纤维增强塑料球阀技术条件 ()
HG/T 3912-2006 内置式安全止流底阀技术条件 Technical specification of internal safety stagnation flow foot valve
JB/T 10159-1999 交流本整型湿式阀用电磁铁 ()
JB/T 10160-1999 直流湿式阀用电磁铁 ()
JB/T 10161-1999 直流干式阀用电磁铁 ()
JB/T 10162-1999 交流干式阀用电磁铁 ()
JB/T 10212-2000 制冷空调用直动式电子膨胀阀 ()
JB/T 10282-2001 液压挖掘机用先导阀 技术条件 ()
JB/T 10302-2001 家用和类似用途小型制冷系统两通电磁阀 ()
JB/T 10364-2002 液压单向阀 ()
JB/T 10365-2002 液压电磁换向阀 ()
JB/T 10366-2002 液压调速阀 ()
JB/T 10367-2002 液压减压阀 ()
JB/T 10368-2002 液压节流阀 ()
JB/T 10369-2002 液压手动及滚轮换向阀 ()
JB/T 10370-2002 液压顺序阀 ()
JB/T 10371-2002 液压卸荷溢流阀 ()
JB/T 10373-2002 液压电液动换向阀和液动换向阀 ()
JB/T 10374-2002 液压溢流阀 ()
JB/T 10386-2002 家用和类似用途空调电子膨胀阀 ()
JB/T 10414-2004 液压二通插装阀 试验方法 ()
JB/T 10507-2005 阀门用金属波纹管 ()
JB/T 10529-2005 陶瓷密封阀门 技术条件 ()
JB/T 10530-2005 氧气用截止阀 ()
JB/T 106-2004 阀门的标志和涂漆 ()
JB/T 10606-2006 气动流量控制阀 Pneumatic flow control valve
JB/T 10648-2006 空调与冷冻设备用制冷剂截止阀 Both airconditioner parts and freezer equipments use refrigerating service valve
JB/T 10673-2006 撑开式金属密封阀门 Metal-sealed unfurled valve
JB/T 10674-2006 水力控制阀 Hydraulic control valve
JB/T 10675-2006 水用套筒阀 Sleeve valve used for water
JB/T 10768-2007 空调水系统用电动阀门 Motor driven valve for air-conditioning water system
JB/T 1118-2001 F1型浮阀 ()
JB/T 1246-2007 真空技术 滑阀真空泵 Vacuum technology-Rotary plunger vacuum pump
JB/T 1308.1-1999 PN250MPa阀门型式和基本参数 ()
JB/T 1308.2-1999 PN250MPa阀门、管件和紧固件技术条件 ()
JB/T 1694-1991 阀杆螺母（一） ()
JB/T 1695-1991 阀杆螺母（二） ()
JB/T 1696-1991 阀杆螺母（三） ()
JB/T 1698-1991 阀杆螺母（五） ()
JB/T 1699-1991 阀杆螺母（四） ()
JB/T 1701-1991 阀杆螺母（六） ()
JB/T 1726-1991 阀瓣盖 ()
JB/T 1735-1991 底阀阀瓣密封圈 ()
JB/T 1736-1991 旋启式止回阀阀瓣密封圈 ()
JB/T 1737-1991 旋启式止回阀阀瓣密封圈压板 ()
JB/T 1749-1991 氨阀阀瓣 ()
JB/T 2001.19-1999 水系统 放气阀 型式与尺寸(PN≤50MPa) ()
JB/T 2001.20-1999 水系统 集中放气阀芯(PN=31.5MPa) ()
JB/T 2001.21-1999 水系统 集中放气阀 型式与尺寸(PN=31.5MPa) ()
JB/T 2001.25-1999 水系统 分配阀芯(PN=20、31.5MPa) ()
JB/T 2001.26-1999 水系统 手动闸阀芯(PN=20、31.5MPa) ()
JB/T 2001.27-1999 水系统 手动闸阀(PN=31.5MPa) ()
JB/T 2001.28-1999 水系统 手动闸阀(PN=20MPa) ()
JB/T 2001.29-1999 水系统 液压闸阀芯(PN=20、31.5MPa) ()
JB/T 2001.30-1999 水系统 液压闸阀(PN=31.5MPa) ()
JB/T 2001.31-1999 水系统 液压闸阀(PN=20MPa) ()
JB/T 2001.32-1999 水系统 螺塞式单向阀芯(PN=20、31.5MPa) ()
JB/T 2001.33-1999 水系统 法兰式单向阀芯(PN=20、31.5MPa) ()
JB/T 2001.34-1999 水系统 单向阀(PN=31.5MPa) ()
JB/T 2001.35-1999 水系统 单向阀(PN=20MPa) ()
JB/T 2001.36-1999 水系统 充液阀芯(PN=20、31.5MPa) ()
JB/T 2001.37-1999 水系统 充液阀 接力器(A型)(PN=31.5MPa) ()
JB/T 2001.38-1999 水系统 充液阀 接力器(A型)(PN=20MPa) ()
JB/T 2001.39-1999 水系统 充液阀(PN=31.5MPa) ()
JB/T 2001.40-1999 水系统 充液阀(PN=20MPa) ()
JB/T 2001.41-1999 水系统 溢流阀(PN=0.4、0.8、1.2MPa) ()
JB/T 2001.43-1999 水系统 两阀分配器(PN=20、31.5MPa) ()
JB/T 2001.44-1999 水系统 四阀分配器(PN=20、31.5MPa) ()
JB/T 2001.45-1999 水系统 四阀分配器(带接力器)(PN=20、31.5MPa) ()
JB/T 2001.46-1999 水系统 泵站用充气阀(PN=20、31.5MPa) ()
JB/T 2001.47-1999 水系统 泵站用气闸阀芯(PN=20、31.5MPa) ()
JB/T 2001.48-1999 水系统 泵站用气闸阀(PN=31.5MPa) ()
JB/T 2001.49-1999 水系统 泵站用气闸阀(PN=20MPa) ()
JB/T 2001.59-1999 水系统 泵站用最低液面阀芯(PN=20、31.5MPa) ()
JB/T 2001.60-1999 水系统 泵站用最低液面阀(PN=31.5MPa) ()
JB/T 2001.61-1999 水系统 泵站用最低液面阀(PN=20MPa) ()
JB/T 2001.69-1999 水系统 随动旋阀DN15 ()
JB/T 2195-1998 YDF2系列阀门电动装置用三相异步电动机技术条件 ()
JB/T 2203-1999 弹簧式安全阀 结构长度 ()
JB/T 2205-2000 减压阀结构长度 ()
JB/T 2231.4-1999 往复活塞压缩机零部件 第4部分:环状阀片 ()
JB/T 2231.5-1999 往复活塞压缩机零部件 第5部分:气阀安装尺寸 ()
JB/T 2765-1981 阀门 名词术语 ()
JB/T 2766-1992 PN16.0～32.0MPa 锻造高压阀门结构长度 ()
JB/T 2768-1992 PN16.0～32.0MPa 管子、管件、阀门端部尺寸 ()
JB/T 308-2004 阀门 型号编制方法 ()
JB/T 3548-1991 制冷用R12、R22、R502热力膨胀阀 ()
JB/T 3595-2002 电站阀门 一般要求 ()
JB/T 4018-1999 电站阀门 型号编制方法 ()
JB/T 4035-1999 阀式避雷器用碳化硅 技术条件 ()
JB/T 4119-1991 制冷用电磁阀 ()
JB/T 450-1992 PN16.0～32.0MPa 锻造角式高压阀门、管件、紧固件 技术条件 ()
JB/T 51181-2000 喷油泵出油阀偶件可靠性考核 评定方法、台架试验方法及失效判定 ()
JB/T 5120-2000 摆线转阀式全液压转向器 ()
JB/T 5211-1991 闸阀阀座 ()
JB/T 5244-2001 液压阀用电磁铁 ()
JB/T 5263-2005 电站阀门铸钢件技术条件 ()
JB/T 5296-1991 通用阀门 流量系数和流阻系数的试验方法 ()
JB/T 5298-1991 管线用钢制平板闸阀 ()
JB/T 5299-1998 液控止回蝶阀 ()
JB/T 5300-1991 通用阀门 材料 ()
JB/T 5345-2005 变压器用蝶阀 ()
JB/T 5410-1991 低真空电磁压差充气阀 型式与基本参数 ()
JB/T 57208-1994 阀门定位器可靠性要求考核方法 ()
JB/T 57209-1994 电磁阀可靠性要求与考核方法 ()
JB/T 57218-1994 气动调节阀可靠性要求与考核方法 ()
JB/T 5916-2004 袋式除尘器用电磁脉冲阀 ()
JB/T 5922-2005 液压二通插装阀 图形符号 ()
JB/T 5963-2004 液压二通、三通、四通螺纹式插装阀 插装孔 ()
JB/T 6375-1992 气动阀用橡胶密封圈 尺寸系列和公差 ()
JB/T 6376-1992 气动阀用橡胶密封圈 沟槽尺寸和公差 ()
JB/T 6378-1992 气动换向阀 技术条件 ()
JB/T 6438-1992 阀门密封面等离子弧堆焊 技术要求 ()
JB/T 6439-1992 阀门受压铸钢件 磁粉探伤检验 ()
JB/T 6440-1992 阀门受压铸钢件 射线照相检验 ()
JB/T 6441-1992 压缩机用安全阀 ()
JB/T 6446-2004 真空阀门 ()
JB/T 6457.1-2004 小型阀控密封式铅酸蓄电池 第1部分：产品分类 ()
JB/T 6457.2-2004 小型阀控密封式铅酸蓄电池 第2部分：技术条件 ()
JB/T 6617-1993 阀门用柔性石墨填料环 技术条件 ()
JB/T 6683-1993 液压转向器配套用组合阀块 ()
JB/T 6899-1993 阀门的耐火试验 ()
JB/T 6900-1993 排污阀 ()
JB/T 6901-1993 封闭式眼镜阀 ()
JB/T 6902-1993 阀门铸钢件液体渗透检查方法 ()
JB/T 6903-1993 阀门锻钢件超声波检查方法 ()
JB/T 7065-2004 变压器用压力释放阀 ()
JB/T 7069-2004 变压器用压力释放阀 试验导则 ()
JB/T 7146.1-1993 化油器阀针型材 ()
JB/T 7174.1-2004 柴油机喷油泵出油阀偶件 技术条件 ()
JB/T 7174.2-2004 柴油机喷油泵出油阀偶件 性能试验方法 ()
JB/T 7223-1994 小型制冷系统用两位三通电磁阀 ()
JB/T 7228-1994 风量调节阀 ()
JB/T 7230-1994 热泵用四通电磁换向阀 ()
JB/T 7239-1994 往复活塞压缩机用网状阀片 ()
JB/T 7245-1994 制冷装置用截止阀 ()
JB/T 7248-1994 阀门用低温钢铸件技术条件 ()
JB/T 7252-1994 阀式孔板节流装置 ()
JB/T 7298-2006 出油阀偶件 主要尺寸和安装尺寸 Dimensions for mounting and connection of delivery valve
JB/T 7310-1994 装载机用减压阀式先导阀 ()
JB/T 7352-1994 工业过程控制系统用电磁阀 ()
JB/T 7368-1994 工业过程控制系统用阀门定位器 ()
JB/T 7376-1994 气动空气减压阀 技术条件 ()
JB/T 7387-1994 工业过程控制系统用电动控制阀 ()
JB/T 7434-2006 阀用电磁铁插头座 Plug and socket-outlet for solenoid of valve
JB/T 7550-2007 空气分离设备用切换蝶阀 ()
JB/T 7744-1995 阀门密封面等离子弧堆焊用合金粉末 ()
JB/T 7745-1995 管线球阀 ()
JB/T 7746-2006 紧凑型钢制阀门 Compact steel valves
JB/T 7747-1995 针形截止阀 ()
JB/T 7748-1995 阀门清洁度和测定方法 ()
JB/T 7749-1995 低温阀门技术条件 ()
JB/T 7760-1995 阀门填料密封 试验规范 ()
JB/T 7857-2006 液压阀污染敏感度评定方法 Hydraulic fluid power-Valves-Method of evaluating contaminant sensitivity
JB/T 7927-1999 阀门铸钢件外观质量要求 ()
JB/T 7928-1999 通用阀门 供货要求 ()
JB/T 8053-1996 制冷系统用直动型双稳态电磁阀 ()
JB/T 8451-1996 固定型阀控密封式铅酸蓄电池 ()
JB/T 8463-1996 二位四通换向阀40MPa ()
JB/T 8473-1996 仪表阀组 ()
JB/T 8527-1997 金属密封蝶阀 ()
JB/T 8528-1997 普通型阀门电动装置技术条件 ()
JB/T 8529-1997 隔爆型阀门电动装置技术条件 ()
JB/T 8530-1997 阀门电动装置型号编制方法 ()
JB/T 8531-1997 阀门手动装置技术条件 ()
JB/T 8592-1997 家用和类似用途电磁四通换向阀 ()
JB/T 8650.2-1997 机床冷却系统元件 内螺纹锥阀 ()
JB/T 8670-1997 YBDF2系列阀门电动装置用隔爆型三相异步电动机 技术条件 ()
JB/T 8691-1998 对夹式刀形闸阀 ()
JB/T 8692-1998 烟道蝶阀 ()
JB/T 8694-1998 往复活塞氧气压缩机网状阀技术条件 ()
JB/T 8729.1-1998 液压多路换向阀 技术条件 ()
JB/T 8729.2-1998 液压多路换向阀 试验方法 ()
JB/T 8845-2000 轮胎式装载机变速箱操纵阀 技术条件 ()
JB/T 8858-2004 闸阀 静压寿命试验规程 ()
JB/T 8859-2004 截止阀 静压寿命试验规程 ()
JB/T 8860-2004 旋塞阀 静压寿命试验规程 ()
JB/T 8861-2004 球阀 静压寿命试验规程 ()
JB/T 8862-2000 阀门电动装置寿命试验规程 ()
JB/T 8863-2004 蝶阀 静压寿命试验规程 ()
JB/T 8864-2004 阀门气动装置 技术条件 ()
JB/T 8937-1999 对夹式止回阀 ()
JB/T 9081-1999 空气分离设备用低温截止阀和节流阀技术条件 ()
JB/T 9092-1999 阀门的检验与试验 ()
JB/T 9093-1999 蒸汽疏水阀技术条件 ()
JB/T 9094-1999 液化石油气设备用紧急切断阀门 技术条件 ()
JB/T 9142-1999 阀门用缓蚀石棉填料技术条件 ()
JB/T 9576-2000 大中型水轮机进水阀门系列 ()
JB/T 9624-1999 电站安全阀技术条件 ()
JB/T 9670-1999 金属氧化物避雷器阀片用氧化锌 ()
JB/T 9729-1999 柴油机喷油泵柱塞偶件、出油阀偶件、喷油嘴偶件径部密封值样品 技术条件 ()
JB/T 9730-1999 柴油机喷油嘴偶件、喷油泵柱塞偶件、喷油泵出油阀偶件 金相检验 ()
JB/T 9736-1999 喷油嘴偶件、柱塞偶件、出油阀偶件 磁粉探伤方法 ()
JB/T 9739.1-2000 汽车起重机和轮胎起重机 平衡阀 ()
JB/T 9839-1999 摆线转阀式闭心静液压转向器 技术条件 ()
JB/T 9840.2-1998 拖拉机挂车气制动系统气制动阀技术条件 ()
JB/T 9840.3-1998 拖拉机挂车气制动系统分配阀技术条件 ()
JB/Z 188-1982 大中型水轮机进水阀门 系列 ()
JB/Z 200-1989 阀式避雷器 产品系列型谱 ()
JC/T 1001-2006 水泥工业用热风阀 ()
JC/T 783-2004 玻璃纤维增强改性酚醛塑料球阀 ()
JC/T 931-2003 机械式便器冲洗阀 ()
MT/T 572-1996 矿用液压多路换向阀试验方法 ()
MT/T 715-1997(2005) 矿用防爆电磁阀通用技术条件 ()
MT/T 765-1997(2005) 液压支架用自动喷雾控制阀通用技术条件 ()
QB 2759-2006 卫生洁具及暖气管道用直角阀 ()
QB/T 1199-1991 浮球阀 ()
QB/T 1291-1991 自动洗衣机用进水电磁阀 ()
QB/T 1675-1992 RHF型系列乳用换向阀 ()
QB/T 2072.9-1994 制糖机械压力容器通用零部件汁汽三通阀 ()
QB/T 2278.1-1996 家用燃气快速热水器冲击电磁阀 ()
QB/T 2278.2-1996 家用燃气快速热水器自吸电磁阀 ()
QB/T 2909-2007 温度压力安全保护阀 Temperature/pressure protection values
QB/T 3649-1999 大便器冲洗阀 ()
QB/T 3894-1999 内螺纹连接旋塞阀旋塞式液面指示器 Cocks with female screw connection--Cock type level indicator
QC/T 305-1999(2005) 汽车动力转向控制阀总成技术条件 ()
QC/T 306-1999(2005) 汽车动力转向控制阀总成台架试验方法 ()
QC/T 411-1999(2005) 保险阀 ()
QC/T 461-1999(2005) 自卸汽车—换向阀技术条件 ()
QC/T 510-1999(2005) 汽车柴油机喷油泵出油阀偶件技术条件 ()
QC/T 511-1999(2005) 汽车柴油机喷油器针阀偶件技术条件 ()
QC/T 593-1999(2005) 液压感载比例阀技术条件 ()
QC/T 663-2000(2005) 汽车空调(HFC-134a)用热力膨胀阀 ()
QC/T 673-2007 汽车用液化石油气电磁阀 Solenoid valve of LPG vehicles
QC/T 674-2007 汽车用压缩天然气电磁阀 Solenoid valve of CNG vehicles
QC/T 675-2000(2005) 汽车用汽油电磁阀 ()
SH/T 3064-2003 石油化工钢制通用阀门选用、检验及验收 ()
SY/T 0511-1996 石油储罐呼吸阀 ()
SY/T 0525.1-1993 石油储罐液压安全阀 ()
SY/T 10006-2000 海上井口地面安全阀和水下安全阀规范 ()
SY/T 10024-1998 井下安全阀系统的设计、安装、修理和操作的推荐作法 ()
SY/T 4102-1995 阀门的检查与安装规范 ()
SY/T 511-1996 石油储罐呼吸阀 ()
SY/T 5215-2005 钻具止回阀 ()
SY/T 6138-1996 油田阀门的选用及采购技术规定 ()
SY/T 6644-2006 使用注入压力操作阀的连续气举井设计推荐作法 Recommended Practice for Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves
YB/T 4072-2007 高炉热风阀 ()
YB/T 4156-2007 干熄焦旋转排出阀 ()
YB/T 4157-2007 高温连杆式切断蝶阀 ()
YB/T 5136-1993(2005) 阀门用铬钒弹簧钢丝 ()
ISO阀标准(ISO valve standards)

--------------------------------------------------------------------------------
编号 中文名称 英文名称
IEC 60099-1 AMD 1-1999 避雷器 第1部分:交流系统用有间隙阀式避雷器 修改件1 Surge arresters - Part 1: Non-linear resistor type gapped arresters for a.c. systems; Amendment 1
IEC 60099-1-1991 避雷器 第1部分:交流系统用有间隙阀式避雷器 Surge arresters; part 1: non-linear resistor type gapped surge arresters for a.c. systems
IEC 60534-1-2005 工业过程控制阀.第1部分:控制阀术语和一般考虑 Industrial-process control valves - Part 1: Control valve terminology and general considerations
IEC 60534-2-1 Corrigendum 1-2000 工业过程控制阀.第2-1部分:流通能力.安装条件下流体流量的校准公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
IEC 60534-2-1-1998 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的校准公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
IEC 60534-2-3-1997 工业过程控制阀 第2-3部分:流通能力 试验规程 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
IEC 60534-2-4-1989 工业过程控制阀 第2部分:流通能力 第4节:固有流动特性和变化范围 Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristics and rangeability
IEC 60534-2-5-2003 工业过程控制阀.第2-5部分:流通能力.通过有段间恢复能力的多段控制阀门的流体流量的校准公式 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery
IEC 60534-3-1-2001 工业过程控制阀.第3-1部分:尺寸.法兰面对面尺寸,两路,直型和法兰中心对面尺寸,两路,球形,角型控制阀门 Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
IEC 60534-3-2-2001 工业过程控制阀 第3-2部分：尺寸 旋转控制阀（除蝶阀外）的端面间距尺寸 Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves
IEC 60534-3-3-1998 工业过程控制阀 第3-3部分:尺寸 对接焊的双通球形、直型控制阀的首尾相接尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
IEC 60534-4-2006 工业过程控制阀.第4部分:检验和常规试验 Industrial process control valves - Part 4: Inspection and routine testing
IEC 60534-5-2004 工业过程控制阀.第5部分:标记 Industrial-process control valves - Part 5: Marking
IEC 60534-6-1-1997 工业过程控制阀 第6部分:定位器联接到控制阀执行机构的安装细则 第1节:线型执行机构上定位器的安装 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators
IEC 60534-6-2-2000 工业过程控制阀 第6部分:定位器联接到控制阀执行机构的安装细则 环形执行机构定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators
IEC 60534-7-1989 工业过程控制阀 第7部分:控制阀数据表 Industrial-process control valves; part 7: control valve data sheet
IEC 60534-8-1-2005 工业过程控制阀.第8-1部分:噪声的考虑.气动流流经控制阀产生的噪声的实验室测量 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
IEC 60534-8-2-1991 工业过程控制阀 第8部分:噪声的考虑 第2节:流动液流经控制阀产生的噪声的实验室测量 Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves
IEC 60534-8-3-2000 工业过程控制阀 第8-3部分:噪声的考虑 控制阀的气动噪声预测法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method
IEC 60534-8-4 Corridendum 1-2006 工业过程控制阀.第8-4部分:噪声问题.预测液体动力流产生的噪声.勘误1 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow; Corrigendum 1
IEC 60534-8-4-2005 工业过程控制阀.第8-4部分:噪声问题.预测液体动力流产生的噪声 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
IEC 60700-1 AMD 1-2003 高压直流(HVDC)电力传输用可控硅阀门.第1部分:电气试验.修改件1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing; Amendment 1
IEC 60700-1 Edition 1.1-2003 高压直流(HVDC)电力传输用可控硅阀.第1部分:电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
IEC 60700-1-1998 高压直流(HVDC)输电用晶闸管阀 第1部分:电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
IEC 60730-2-17 AMD 1-2000 家用和类似用途的自动电气控制.第2-17部分:电气操作气体阀门的特殊要求,包括机械要求.修改件1 Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements; Amendment 1
IEC 60730-2-17 Edition 1.1-2001 家用和类似用途的自动电气控制.第2-17部分:电控气阀的特殊要求,包括机械要求 Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
IEC 60730-2-17-1997 家用及类似用途的电气自动控制器 第2-17部分:电动气阀的特殊要求(包括机械要求) Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated gas valves, including mechanical requirements
IEC 60730-2-19 AMD 1-2000 家用和类似用途的自动电气控制.第2-19部分:电气操作油阀门的特殊要求,包括机械要求.修改件1 Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements; Amendment 1
IEC 60730-2-19 Edition 1.1-2001 家用和类似用途的自动电气控制.第2-19部分:电控油阀的特殊要求,包括机械要求 Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
IEC 60730-2-19-1997 家用及类似用途的电气自动控制器 第2-19部分:电动油阀的特殊要求(包括机械要求) Automatic electric controls for household and similar use - Part 2: Particular requirements for electrically operated oil valves, including mechanical requirements
IEC 60730-2-8 AMD 1-2002 家用和类似用途的电气自动控制器.第2-8部分:电动水阀的特殊要求(包括机械要求).修改件1 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements; Amendment 1
IEC 60730-2-8 Edition 2.1-2003 家用和类似用途的电器自动控制器.第2-8部分:电动水阀的特殊要求(包括机械要求) Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
IEC 60730-2-8-2000 家用和类似用途的电气自动控制器 第2-8部分:电动水阀的特殊要求(包括机械要求) Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
IEC 60896-21-2004 固定式铅酸蓄电池组.第21部分:阀调整型.试验方法 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
IEC 60896-22-2004 固定式铅酸蓄电池组.第22部分:阀调整型.要求 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
IEC 61056-1-2002 通用铅酸蓄电池组(阀门调节型).第1部分:一般要求、功能特性.试验方法 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics; Methods of test
IEC 61056-2-2002 通用铅酸蓄电池组(阀门调节型).第2部分:尺寸、端子和标记 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
IEC 61148 Corrigendum 1-1995 阀器件堆和组合装置以及电力变流设备的端子标记 Terminal markings for valve device stacks and assemblies and for power convertor equipment
IEC 61148-1992 阀器件堆和组合装置以及电力变流设备的端子标记 Terminal markings for valve device stacks and assemblies and for power convertor equipment
IEC 61514-2-2004 工业过程控制系统.第2部分:气动输出智能阀门定位器性能评定方法 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
IEC 61514-2000 工业过程控制系统 气动输出阀门定位器性能评定方法 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
IEC 61954 AMD 1-2003 送电和配电系统用电力电子设备.静态变量补偿器用可控硅阀门的试验.修改件1 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators; Amendment 1
IEC 61954 Corrigendum 1-1999 输电和配电系统用电力电子设备.静态无功功率补偿器用晶闸管阀的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
IEC 61954-1999 输电和配电系统用电力电子设备 静态无功功率补偿器用晶闸管阀的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
IEC/TR3 61056-3-1991 便携式铅酸电池和蓄电池组(阀门调节型) 第3部分:电器使用的安全建议 Portable lead-acid cells and batteries (valve-regulated types); part 3: safety recommendations for use in electric appliances
ISO 10156-1996 气体和气体混合物 为选择气瓶阀出气口测定气体的潜在燃烧性和氧化能力 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
ISO 1023-1974 航空器 高压空气充气阀 Aircraft; High pressure air charging valves
ISO 10294-1-1996 耐火试验 用于空气调节系统的防火阀 第1部分:试验方法 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
ISO 10294-2-1999 耐火试验 用于空气调节系统的防火阀 第2部分:试验结果的分类、校正和应用 Fire resistance tests - Fire dampers for air distribution systems - Part 2: Classification, criteria and field of application of test results
ISO 10294-3-1999 耐火试验 用于空气调节系统的防火阀 第3部分:试验方法指南 Fire resistance tests - Fire dampers for air distribution systems - Part 3: Guidance on the test method
ISO 10294-4-2001 耐火试验 用于空气调节系统的防火阀 第4部分：热释放机理试验 Fire resistance tests - Fire dampers for air distribution systems - Part 4: Test of thermal release mechanism
ISO 10294-5-2005 耐火试验.用于空气调节系统的防火阀.第5部分:膨胀防火阀 Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers
ISO 10297-2006 可运输气瓶.气瓶阀.规范和型式试验 Transportable gas cylinders - Cylinder valves - Specification and type testing
ISO 10372-1992 液压传动 四油口和五油口伺服阀 安装面 Hydraulic fluid power; four- and five-port servovalves; mounting surfaces
ISO 10417-2004 石油和天然气工业.井下安全阀系统.设计、安装、操作和修整 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
ISO 10432-2004 石油和天然气工业.下降孔设备.地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
ISO 10434-2004 石油、石油化学和相关工业用栓接帽状钢闸阀 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
ISO 10497-2004 阀门试验.阀门耐火试验要求 Testing of valves - Fire type-testing requirements
ISO 10522-1993 农业灌溉设备 直接作用的调压阀 Agricultural irrigation equipment; direct-acting pressure-regulating valves
ISO 10524-3-2005 医用气体设备用的压力调节器.第3部分:带气瓶阀的压力调节器 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
ISO 10631-1994 通用金属蝶阀 Metallic butterfly valves for general purposes
ISO 10692-1-2001 气瓶 微电子工业用气瓶阀的连接 第1部分：出口连接 Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1: Outlet connections
ISO 10692-2-2001 气瓶 微电子工业用气瓶阀的连接 第2部分：阀与瓶连接的规范和型式试验 Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 2: Specification and type testing for valve to cylinder connections
ISO 10770-1-1998 液压传动 电调制液压控制阀 第1部分:四通流量控制阀的试验方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves
ISO 10770-2-1998 液压传动 电调制液压控制阀 第2部分:三通流量控制阀的试验方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves
ISO 10920-1997 气瓶 气瓶与瓶阀连接用25E锥螺纹 规范 Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification
ISO 10933-1997 燃气分配系统用聚乙烯(PE)阀门 Polyethylene (PE) valves for gas distribution systems
ISO 11114-1-1997 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第1部分:金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
ISO 11114-2-2000 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分:非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
ISO 11114-3-1997 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第3部分:氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere
ISO 11114-4-2005 移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择抗氢脆金属材料的试验方法 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
ISO 11116-1-1999 气瓶 气瓶与瓶阀连接用17E锥螺纹 第1部分:规范 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specification
ISO 11116-2-1999 气瓶 气瓶与瓶阀连接用17E锥螺纹 第2部分:检验量规 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges
ISO 11191-1997 气瓶 气瓶与瓶阀连接用25E锥螺纹 检验量规 Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Inspection gauges
ISO 11419-1997 农业灌溉设备 浮子式空气释放阀 Agricultural irrigation equipment - Float type air release valves
ISO 11727-1999 气压传动 控制阀和其他元件的气口控制机构的标识 Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components
ISO 11929-1-2000 电离辐射测量探测限和判断阀的确定 第1部分:基本原则及对不经过样品处理的计数测量的应用 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 1: Fundamentals and application to counting measurements without the influence of sample treatment
ISO 11929-2-2000 电离辐射测量探测限和判断阀的确定 第2部分:基本原则及对经过样品处理的计数测量的应用 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 2: Fundamentals and application to counting measurements with the influence of sample treatment
ISO 11929-3-2000 电离辐射测量探测限和判断阀的确定 第3部分:基本原则及对不经过样品处理的高分辨率γ能谱法计数测量的应用 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
ISO 11929-7-2005 电离辐射测量探测限和判断阀的确定.第7部分:基本原则和一般应用 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 7: Fundamentals and general applications
ISO 11933-4-2001 密封箱室部件 第4部分：通风和气体清洁系统，诸如：过滤器、捕获器、安全和调节阀、控制和保护器件 Components for containment enclosures - Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices
ISO 12149-1999 螺栓连接阀盖的通用钢制截止阀 Bolted bonnet steel globe valves for general-purpose applications
ISO 12209-1-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第1部分:轭型连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections
ISO 12209-2-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第2部分:螺纹式连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections
ISO 12209-3-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第3部分:230巴阀适配器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves
ISO 12238-2001 气压传动 方向控制阀 移动时间的测量 Pneumatic fluid power - Directional control valves - Measurement of shifting time
ISO 13340-2001 可搬运输汽缸 不可再充气汽缸阀 规范和原机试验 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing
ISO 13341 Technical Corrigendum 1-1998 移动气瓶 气瓶阀的装配 技术勘误1 Transportable gas cylinders - Fitting of valves to gas cylinders; Technical Corrigendum 1
ISO 13341-1997 移动气瓶 气瓶阀的装配 Transportable gas cylinders - Fitting of valves to gas cylinders
ISO 13758-1996 液化石油气 评价丙烷干燥度 阀冻结法 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
ISO 14245-2006 气瓶.液化石油气瓶阀门的规范和试验.自闭合 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing
ISO 14246-2001 可搬运的储气罐 储气罐阀 制造试验和检验 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections
ISO 14313-1999 石油和天然气工业 管道输送系统 管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
ISO 14617-8-2002 图表用图形符号.第8部分:阀门和气流调节器 Graphical symbols for diagrams - Part 8: Valves and dampers
ISO 14723-2001 石油和天然气工业 管道输送系统 海底管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
ISO 14960-2004 无内胎轮胎.气阀和部件.试验方法 Tubeless tyres - Valves and components - Test methods
ISO 15218-2003 气压传动.3/2电磁阀.安装接口表面 Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces
ISO 15245-1-2001 气瓶 阀与气瓶连接的平行螺纹 第1部分：规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
ISO 15245-2-2001 气瓶 阀与气瓶连接的平行螺纹 第2部分：量规检验 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection
ISO 15364-2000 船舶与海上技术 散货船真空/压力阀 Ships and marine technology - Pressure/vacuum valves for cargo tanks
ISO 15407-1-2000 气压传动 五气口方向控制阀、规格18mm和26mm 第1部分:不带电接头的安装面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector
ISO 15407-2-2003 气压传动.五气口方向控制阀,规格18mm和26mm.第2部分:可任选连接器的安装接口 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional electrical connector
ISO 15500-12-2001 道路车辆 压缩天然气(CNG)燃料系统部件 第12部分:减压阀 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)
ISO 15500-14-2002 道路车辆.压缩天然气(CNG)燃料系统部件.第14部分:溢流阀 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 14: Excess flow valve
ISO 15500-3-2001 道路车辆 压缩天然气(CNG)燃料系统部件 第3部分:防逆阀 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve
ISO 15500-4-2001 道路车辆 压缩天然气(CNG)燃料系统部件 第4部分:控阀 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve
ISO 15500-5-2001 道路车辆 压缩天然气(CNG)燃料系统部件 第5部分:手控气缸阀 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve
ISO 15500-6-2001 道路车辆 压缩天然气(CNG)燃料系统部件 第6部分:自动阀 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 6: Automatic valve
ISO 15665 Technical Corrigendum 1-2004 声学.管道、阀门和法兰的隔音.技术勘误1 Acoustics - Acoustic insulation for pipes, valves and flanges; Technical Corrigendum 1
ISO 15665-2003 声学.管、阀和法兰隔声 Acoustics - Acoustic insulation for pipes, valves and flanges
ISO 15761-2002 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
ISO 15848-1-2006 工业阀.漏气的测量、试验和鉴定程序.第1部分:阀门定型试验的分类系统和鉴定程序 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves
ISO 15995-2006 气瓶.液化石油气瓶阀门的规范和试验.手工操作 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
ISO 15996-2005 储气瓶.剩余压力阀.一般要求和型式试验 Gas cylinders - Residual pressure valves - General requirements and type testing
ISO 16135-2006 工业阀.热塑性材料的球阀 Industrial valves - Ball valves of thermoplastics materials
ISO 16136-2006 工业阀.热塑性材料的蝶阀 Industrial valves - Butterfly valves of thermoplastics materials
ISO 16137-2006 工业阀.热塑性材料的止回阀 Industrial valves - Check valves of thermoplastics materials
ISO 16138-2006 工业阀.热塑性材料的隔膜阀 Industrial valves - Diaphragm valves of thermoplastics materials
ISO 16139-2006 工业阀.热塑性材料的门阀 Industrial valves - Gate valves of thermoplastics materials
ISO 17082-2004 气压传动.阀.供货商文献中的数据 Pneumatic fluid power - Valves - Data to be included in supplier literature
ISO 17292-2004 石油、石化和相关工业用金属球阀 Metal ball valves for petroleum, petrochemical and allied industries
ISO 20401 Technical Corrigendum 1-2005 气动液压驱动系统.方向控制阀.直径在8mm到12mm的圆形电连接器管脚分布的规范.技术勘误1 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm; Technical Corrigendum 1
ISO 20401-2005 气动液压驱动系统.方向控制阀.直径在8mm到12mm的圆形电连接器管脚分布的规范 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
ISO 21787-2006 工业阀.热塑性材料的球形阀 Industrial valves - Globe valves of thermoplastics materials
ISO 2290-1972 旋转钻井设备.方钻杆上旋阀和下旋阀 Rotary drilling equipment; Upper and lower Kelly cocks
ISO 23551-1-2006 气体燃烧器和燃气设备用安全和控制装置.特殊要求.第1部分:自动阀门 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic valves
ISO 23551-4-2005 气体燃烧器和燃气设备用安全和控制设备.特殊要求.第4部分:自动截止阀的阀门检验系统 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 4: Valve-proving systems for automatic shut-off valves
ISO 3822-2-1995 声学 供水设施的装置和设备发射的噪声的实验室测试 第2部分:放水龙头和混合阀的安装和工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves
ISO 3822-3-1997 声学 供水设施的装置和设备发射的噪声的实验室测试 第3部分:管路阀门和器件的安装和工作条作 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
ISO 407-2004 小型医用气瓶.针导轭式阀连接 Small medical gas cylinders - Pin-index yoke-type valve connections
ISO 4126-1-2004 过压保护安全设备.第1部分:安全阀 Safety devices for protection against excessive pressure - Part 1: Safety valves
ISO 4126-3-2006 过压保护安全设备.第3部分:组合中防爆板安全设备和安全阀门 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination
ISO 4126-4-2004 过压保护安全设备.第4部分:液压控制安全阀 Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves
ISO 4401-2005 液压传动.四油口定向控制阀.装配面 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
ISO 4411-1986 液压传动 阀 压差/流量特性的测定 Hydraulic fluid power; Valves; Determination of pressure differential/flow characteristics
ISO 4422-4-1997 给水用硬聚氯乙烯(PVC-U)管材和管件 规范 第4部分:阀及辅助设备 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 4: Valves and ancillary equipment
ISO 4548-2-1997 内燃机全流式机油滤清器试验方法 第2部分:滤芯旁通阀特性 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 2: Element by-pass valve characteristics
ISO 4548-9-1995 内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
ISO 5135-1997 声学 在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
ISO 5145 AMD 1-2006 气体和混合气体气瓶阀出气口.选择和尺寸.修改件1：医用气体气瓶瓶阀出气口 Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning; Amendment 1: Cylinder valve outles for gases for medical use
ISO 5145-2004 气体和混合气体气瓶瓶阀出气口.选择和尺寸 Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
ISO 5208-1993 通用阀门 阀门的压力试验 Industrial valves; pressure testing of valves
ISO 5209-1977 通用阀门 标志 General purpose industrial valves; Marking
ISO 5210-1991 通用阀门 多回转阀门驱动装置的连接 Industrial valves; multi-turn valve actuator attachments
ISO 5211-2001 工业阀门.部分回转阀门致动器附件 Industrial valves - Part-turn actuator attachment
ISO 5599-1-2001 气压传动 五气口方向控制阀 第1部分:不带电接头的安装面 Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector
ISO 5599-2 AMD 1-2004 气压传动.五气口方向控制阀.第2部分:带可选电接头的安装面.修改件1 Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector; Amendment 1
ISO 5599-2-2001 气压传动 五气口方向控制阀 第2部分:带可选电接头的安装面 Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector
ISO 5599-3-1990 气压传动 五气口方向控制阀 第3部分:表示阀功能的标注方法 Pneumatic fluid power; five-port directional control valves; part 3: code system for communication of valve functions
ISO 5781-2000 液压传动 压力控制阀(不包括溢流阀)、顺序阀、卸荷阀、节流阀和单向阀 安装面 Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces
ISO 5783-1995 液压传动 阀安装面和插装阀孔的标识规则 Hydraulic fluid power - Code for identification of valve mounting surfaces and cartridge valve cavities
ISO 5996-1984 铸铁闸阀 Cast iron gate valves
ISO 6002-1992 用螺栓连接阀盖的钢制闸阀 Bolted bonnet steel gate valves
ISO 6182-2-2005 消防.自动喷水灭火系统.第2部分:湿式报警阀、延迟器和水务警铃的要求和试验方法 Fire protection - Automatic sprinkler systems - Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms
ISO 6182-3-2005 消防.自动喷水灭火系统.第3部分:干式阀的要求和试验方法 Fire protection - Automatic sprinkler systems - Part 3: Requirements and test methods for dry pipe valves
ISO 6182-5-2006 消防.自动喷水灭火系统.第5部分:雨淋阀的要求和试验方法 Fire protection - Automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves
ISO 6182-6-2006 消防.自动喷水灭火系统.第6部分:止回阀的要求和试验方法 Fire protection - Automatic sprinkler systems - Part 6: Requirements and test methods for check valves
ISO 6182-8-2006 消防.自动喷水灭火系统.第8部分:预动干式报警阀的要求和试验方法 Fire protection - Automatic sprinkler systems - Part 8: Requirements and test methods for pre-action dry alarm valves
ISO 6263-1997 液压传动 调速阀 安装面 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
ISO 6264-1998 液压传动 溢流阀 安装面 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
ISO 6403-1988 液压传动 控制流量及压力的阀 试验方法 Hydraulic fluid power; valves controlling flow and pressure; test methods
ISO 6552-1980 自动蒸气疏水阀 术语定义 Automatic steam traps; Definition of technical terms
ISO 6553-1980 自动蒸气疏水阀 标志 Automatic steam traps; Marking
ISO 6554-1980 法兰连接自动蒸气疏水阀 结构长度 Flanged automatic steam traps; Face-to-face dimensions
ISO 6704-1982 自动蒸气疏水阀 分类 Automatic steam traps; Classification
ISO 683-15-1992 热处理钢、合金钢和易切钢 第15部分:内燃机用阀门钢 Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines
ISO 6948-1981 自动蒸气疏水阀 产品试验和工作特性试验 Automatic steam traps; Production and performance characteristic tests
ISO 6953-1 Technical Corrigendum 1-2006 气压传动.压缩空气调压阀和带过滤器的调压阀.第1部分:商务文件中包含的主要特性和产品标识要求.技术勘误1 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements; Technical Corrigendum 1
ISO 6953-1-2000 气压传动 压缩空气调压阀和带过滤器的调压阀 第1部分:商务文件中包含的主要特性和产品标识要求 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marketing requirements
ISO 6953-2-2000 气压传动 压缩空气调压阀和带过滤器的调压阀 第2部分:评定商务文件中包含的主要特性的试验方法 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
ISO 7121-2006 工业通用钢制球阀 Steel ball valves for general-purpose industrial applications
ISO 7244-1984 空气配给和空气扩散 风门和阀门的空气动力试验 Air distribution and air diffusion; Aerodynamic testing of dampers and valves
ISO 7259-1988 地下用的按钮操纵的铸铁闸阀 Predominantly key-operated cast iron gate valves for underground use
ISO 7289-1996 气焊、切割及相关工艺用带关闭阀的快速接头 Quick-action couplings with shut-off valves for gas welding, cutting and allied processes
ISO 7349-1983 热塑性塑料阀门 连接参数 Thermoplastics valves; Connection references
ISO 7368-1989 液压传动 二油口盖板式插装阀 插装孔 Hydraulic fluid power; two-port slip-in cartridge valves; cavities
ISO 7508-1985 承压管用硬聚氯乙烯(PVC-U)阀门 基本尺寸 公制系列 Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure; Basic dimensions; Metric series
ISO 7714-2000 农业灌溉设备 容量阀 一般要求和试验方法 Agricultural irrigation equipment - Volumetric valves - General requirements and test methods
ISO 7789 Technical Corrigendum 1-1999 液压传动 二油口、三油口和四油口螺纹式插装阀 插装孔 技术勘误1 Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities; Technical Corrigendum 1
ISO 7789-1998 液压传动 二油口、三油口和四油口螺纹式插装阀 插装孔 Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
ISO 7790-1997 液压传动 四油口叠加阀和四油口方向控制阀02、03和05规格 夹紧尺寸 Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
ISO 7841-1988 自动蒸气疏水阀 漏气量的测定 试验方法 Automatic steam traps; determination of steam loss; test methods
ISO 7842-1988 自动蒸气疏水阀 排水量测定 试验方法 Automatic steam traps; determination of discharge capacity; test methods
ISO 8233-1988 热塑性塑料阀门 扭矩 试验方法 Thermoplastics valves; torque; test method
ISO 8242-1989 受压管用聚丙烯(PP)阀门 基本尺寸 公制系列 Polypropylene (PP) valves for pipes under pressure; basic dimensions; metric series
ISO 8659-1989 热塑性塑料阀门 疲劳强度 试验方法 Thermoplastics valves; fatigue strength; test method
ISO 9393-1-2004 工业用热塑性阀门.压力试验方法和要求.第1部分:总则 Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 1: General
ISO 9393-2-2005 工业用热塑性阀门.压力试验方法和要求.第2部分:试验条件和基本要求 Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 2: Test conditions and basic requirements
ISO 9461-1992 液压传动 阀的油口、底板、控制装置和电磁铁的标准 Hydraulic fluid power; identification of valve ports, subplates, control devices and solenoids
ISO 9635-1990 灌溉设备 液压操纵灌溉阀 Irrigation equipment; hydraulically operated irrigation valves
ISO 9644 AMD 1-1998 农业灌溉设备 灌溉阀压力损失 试验方法 修改1 Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method; Amendment 1
ISO 9644-1993 农业灌溉设备 灌溉阀压力损失 试验方法 Agricultural irrigation equipment; pressure losses in irrigation valves; test method
ISO 9817-1991 乘用车 发动机冷却系统 注水口上的带限压阀加水口盖及其斜面座的尺寸 Passenger cars; engine cooling systems; dimensions of pressure caps and their ramp seats on filler necks
ISO 9818-1991 乘用车 发动机冷却系统 带限压阀加水口盖的试验方法和标志 Passenger cars; engine cooling systems; test methods and marking of pressure caps
ISO 9911-1993 农业灌溉设备 手工操作小型塑料阀门 Agricultural irrigation equipment; manually operated small plastics valves
ISO 9952-1993 农业灌溉设备 止回阀 Agricultural irrigation equipment; check valves
ISO/TR 7470-1988 气瓶阀出气口 标准或实际使用的一览表 Valve outlets for gas cylinders; list of provisions which are either standardized or in use
日本阀标准(JIS valve standards)

--------------------------------------------------------------------------------
编号 中文名称
日本語標題 英文名称
JIS A1424-2-1998 给水装置中装置和设备噪声的实验室试验方法.第2部分:排水阀和混合阀的安装和操作条件
給水器具発生音の実験室測定方法　―　第２部：給水栓及び混合水栓の取付け方法並びに作動条件 Method for laboratory tests on noise emission from appliances and equipments used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves
JIS B0100-1984 阀门术语汇编
バルブ用語 Glossary of terms for valves
JIS B0109-3-1999 往复式内燃机.元件和系统词汇.第3部分:阀门,凸轮轴驱动机构和作动机构
往復動内燃機関　―　要素及びシステム用語　―　第３部：弁，カム及び駆動装置 Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 3: Valves, camshaft drive and actuating mechanisms
JIS B2001-1987 阀门的公称尺寸和孔径
バルブの呼び径及び口径 Nominal size and bore of valves
JIS B2002-1987 阀门的面对面和端对端尺寸
バルブの面間寸法 Face-to-face and end-to-end dimensions of valves
JIS B2003-1994 阀门的检验总则
バルブの検査通則 General rules for inspection of valves
JIS B2004-1994 阀门的标志总则
バルブの表示通則 General rules for marking on valves
JIS B2005-1-2004 工业过程控制阀.第1部分:控制阀术语和一般条件
工業プロセス用調節弁－第１部：調節弁用語及び一般的必要条件 Industrial-process control valves -- Part 1: Control valve terminology and general considerations
JIS B2005-2-1-2005 工业过程控制阀.第2-1部分:流通能力.安装条件下流体流量的校准公式
工業プロセス用調節弁－第２部：流れの容量－第1節：取付け状態における流れのサイジング式 Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions
JIS B2005-2-3-2004 工业过程控制阀.第2-3部分:阀的通过能力.试验过程
工業プロセス用調節弁－第２部：流れの容量－第３節：試験手順 Industrial-process control valves -- Part 2-3: Flow capacity -- Test procedures
JIS B2005-2-4-2004 工业过程控制阀.第2部分:阀的通过能力.第4节:固有流动特性和变化范围
工業プロセス用調節弁－第２部：流れの容量－第４節：固有流量特性及びレンジアビリティ Industrial-process control valves -- Part 2: Flow capacity -- Section Four: Inherent flow characteristics and rangeability
JIS B2005-3-1-2005 工业过程控制阀.第3-1部分:尺寸.有法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球形角型控制阀的中心
工業プロセス用調節弁－第３部：寸法－第１節：フランジ形二方ストレート形グローブ調節弁の面間寸法及びアングル形グローブ調節弁の中心－面間寸法 Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
JIS B2005-3-2-2005 工业过程控制阀.第3-2部分:尺寸.旋转控制阀(蝶阀除外)的端面间距尺寸
工業プロセス用調節弁－第３部：寸法－第２節：バタフライ弁を除く回転形調節弁の面間寸法 Industrial-process control valves -- Part 3-2: Dimensions -- Face-to-face dimensions for rotary control valves except butterfly valves
JIS B2005-3-3-2005 工业过程控制阀.第3-3部分:尺寸.对接焊的双通球形、直型控制阀的首尾相接尺寸
工業プロセス用調節弁－第３部：寸法－第３節：突合せ溶接形二方ストレート形グローブ調節弁の面間寸法 Industrial-process control valves -- Part 3-3: Dimensions -- End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
JIS B2005-5-2004 工业过程控制阀.第5部分:标记
工業プロセス用調節弁－第５部：表示 Industrial-process control valves -- Part 5: Marking
JIS B2005-6-1-2004 工业过程控制阀.第6部分:定位器联接到控制阀执行机构的安装细节.第1节:线型执行机构上定位器的安装
工業プロセス用調節弁－第６部：調節弁へのポジショナの取付けの詳細－第１節：直線運動駆動部へのポジショナの取付け Industrial-process control valves -- Part 6: Mounting details for attachment of positioners to control valves -- Section 1: Positioner mounting on linear actuators
JIS B2005-6-2-2005 工业过程控制阀.第6部分:定位器联接到控制阀的安装细则.安装在环形执行机构上的定位器
工業プロセス用調節弁－第６部：調節弁へのポジショナの取付けの詳細－第２節：回転運動駆動部へのポジショナの取付け Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to control valves -- Positioner mounting on rotary actuators
JIS B2005-7-2004 工业过程控制阀.第7部分:控制阀数据表
工業プロセス用調節弁－第７部：調節弁データシート Industrial-process control valves -- Part 7: Control valve data sheet
JIS B2005-8-1-2004 工业过程控制阀.第8部分:噪声的考虑.第1节:气动流流经控制阀产生的噪声的实验室测量
工業プロセス用調節弁－第８部：騒音－第１節：調節弁の空気力学的流動騒音の実験室における測定 Industrial-process control valves -- Part 8: Noise considerations -- Section One: Laboratory measurement of noise generated by aerodynamic flow through control valves
JIS B2007-1993 工业过程控制阀.检验和常规试验
工業プロセス用調節弁　―　試験及び検査 Industrial-process control valves -- Inspection and routine testing
JIS B2011-2003 青铜闸阀、球形阀、直角形阀和单向阀
青銅弁青銅弁 Bronze, gate, globe, angle, and check valves
JIS B2011 AMD 1-2004 青铜闸阀、球阀、角阀和止回阀(修改件1)
青銅弁（追補１） Bronze, gate, globe, angle, and check valves (Amendment 1)
JIS B2031-1994 灰口铸铁阀
ねずみ鋳鉄弁 Gray cast iron valves
JIS B2032-1995 圆片形橡胶座节流阀
ウェハー形ゴムシートバタフライ弁 Wafer type rubber-seated butterfly valves
JIS B2051-1994 10 K 可锻铸铁螺纹阀
可鍛鋳鉄１０Ｋねじ込み形弁 Malleable iron 10 K screwed valves
JIS B2061-2006 龙头、球形旋塞和冲洗阀
給水栓 Faucets, ball taps and flush valves
JIS B2062-1994 水厂用闸阀
水道用仕切弁 Sluice valves for water works
JIS B2071-2000 钢阀门
鋼製弁 Steel valves
JIS B8210-1994 蒸汽锅炉和压力容器.弹簧加载安全阀
蒸気用及びガス用ばね安全弁 Steam boilers and pressure vessels -- Spring loaded safety valves
JIS B8210 ERRATUM 1-2001 蒸汽锅炉和压力容器.弹簧加载安全阀(勘误1)
Steam boilers and pressure vessels -- Spring loaded safety valves (Erratum 1)
JIS B8225-1993 安全阀.排放系数的测定方法
安全弁　―　吹出し係数測定方法 Safety valves -- Measuring methods for coefficient of discharge
JIS B8244-2004 液化乙炔瓶用阀
溶解アセチレン容器用弁 Valves for dissolved acetylene cylinder
JIS B8245-2004 液化石油气瓶用阀
液化石油ガス容器用弁 Valves for liquefied petroleum gas cylinder
JIS B8246-2004 高压气瓶阀
高圧ガス容器用弁 Valves for high pressure gas cylinders
JIS B8355-1997 液压流体动力.装配型四通电磁操纵阀
油圧―サブプレート取付形４ポート電磁切換弁 Hydraulic fluid power -- Subplate type solenoid operated four-port valves
JIS B8357-2000 液压动力.带压力补偿的流量控制阀.安装面
油圧用圧力補償付流量調整弁　―　取付面及び取付寸法 Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
JIS B8373-1993 气动系统.二通电磁操纵阀
空気圧用２ポート電磁弁 Pneumatic system -- 2-port solenoid operated valves
JIS B8374-1993 气动系统.三通电磁操纵阀
空気圧用３ポート電磁弁 Pneumatic system -- 3-port solenoid operated valves
JIS B8375-1-2000 气动液压动力.五阀口方向控制阀.第1部分:无电气连器的安装界面
空気圧用５ポート方向制御弁―第１部：電気コネクタなしインタフェース取付面 Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector
JIS B8375-2-2000 气动液压动力.五阀口方向控制阀.第2部分:带任选电气连接器的安装界面
空気圧用５ポート方向制御弁―第２部：電気コネクタ付きインタフェース取付面 Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector
JIS B8375-3-2000 气动液压动力.五阀口方向控制阀.第3部分:阀功能传送代码系统
空気圧用５ポート方向制御弁　―　第３部：弁機能伝達用コード体系 Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions
JIS B8376-1994 气动用速度控制阀
空気圧用速度制御弁 Speed control valves for pneumatic use
JIS B8380-2002 气压流体动力.控制阀门和其他元部件端口和控制机构的鉴定
空気圧用制御弁及び他機器のポート及び制御機構の識別 Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components
JIS B8386-2000 液压流体动力.阀门.压差/流体特性的测定
油圧　―　バルブ　―　差圧及び流量特性の測定方法 Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
JIS B8387-2000 液压流体动力.四孔模块通气阀和四孔方向控制阀.02,03,05尺寸.夹持尺寸
油圧　―　４ポート形モジュラスタック形弁及び４ポート形方向制御弁　―　サイズ０２，０３及び０５　―　締付寸法 Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions
JIS B8400-1-2003 气动流体动力.尺寸为 18 mm - 26 mm 的五孔定向控制阀.第1部分:无电气连接件的安装介面
空気圧　―　５ポート方向制御弁（サイズ１８ｍｍ及び２６ｍｍ）　―　第１部：電気コネクタなしインタフェース取付面 Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector
JIS B8401-1999 自动疏水阀
蒸気トラップ Automatic steam traps
JIS B8410-2004 水管用减压阀
水道用減圧弁 Pressure reducing valves for water works
JIS B8414-2004 热水器用安全阀
温水機器用逃し弁 Relief valves for hot water appliances
JIS B8471-2004 水管道.电磁阀
水用電磁弁 Water pipe line -- Solenoid valves
JIS B8472-1994 蒸汽管道.电磁阀
蒸気用電磁弁 Steam pipe line -- Solenoid valves
JIS B8473-1994 燃油管道.电磁阀
燃料油用電磁弁 Fuel oil pipe line -- Solenoid valves
JIS B8605-2002 致冷剂截止阀
冷媒用止め弁 Stop valves for refrigerants
JIS B8619-1999 热力制冷剂膨胀阀.性能的检验方法
冷媒用温度自動膨張弁　―　性能試験方法 Thermostatic refrigerant expansion valves -- Methods of testing for performance
JIS B8651-2002 比例电动液压减压阀试验方法
比例電磁式リリーフ弁試験方法 Test methods for electro-hydraulic proportional pressure relief valves
JIS B8652-2002 电动液压比例安全阀和减压阀的试验方法
比例電磁式減圧弁及び比例電磁式リリーフ減圧弁試験方法 Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves
JIS B8653-2002 电动液压比例节流阀试验方法
比例電磁式絞り弁試験方法 Test methods for electro-hydraulic proportional metering valves
JIS B8654-2002 电动液压比例串联型流量控制阀试验方法
比例電磁式シリーズ形流量調整弁試験方法 Test methods for electro-hydraulic proportional series flow control valves
JIS B8655-2002 电动液压比例串联型定向流量控制阀试验方法
比例電磁式シリーズ形方向流量調整弁試験方法 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B8656-2002 电动液压比例旁通流量控制阀试验方法
比例電磁式バイパス形流量調整弁試験方法 Test methods for electro-hydraulic proportional bypass flow control valves
JIS B8657-2002 电动液压比例定向旁通流量控制阀试验方法
比例電磁式バイパス形方向流量調整弁試験方法 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B8659-1-2000 液压流体动力.电气调节液压控制阀门.第1部分:四路直流控制阀门的试验方法
油圧　―　電気操作形油圧制御弁　―　第１部：４方向流量制御弁試験方法 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves
JIS B8659-2-2002 液压流体动力.电气调节液压控制阀门.第2部分:三路定向流量控制阀门的试验方法
油圧　―　電気操作形油圧制御弁　―　第２部：３方向流量制御弁試験方法 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
JIS B8660-2000 液压动力.流量和压力控制阀.试验方法
油圧　―　制御弁（流れ?圧力）　―　試験方法 Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods
JIS B8664-2001 液压流体动力.压力控制阀(不包括减压阀)、顺序活门、释荷阀、节流阀和止回阀. 安装表面
油圧―減圧弁，シーケンス弁，アンロード弁，絞り弁及びチェック弁―取付面 Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
JIS B8665-2001 液压流体动力.阀门安装表面和插装式阀腔的识别代码
油圧　―　バルブ取付面及びカートリッジ形弁取付穴形状の識別コード Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities
JIS B8666-2001 液压流体动力.减压阀.安装表面
油圧　―　リリーフ弁　―　取付面 Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
JIS C8702-1-2003 小型阀调节的铅酸蓄电池组.第1部分:一般要求、功能特性.试验方法
小形制御弁式鉛蓄電池―第１部：一般要求事項，機能特性及び試験方法 Small-sized valve regulated lead-acid batteries -- Part 1: General requirements, functional characteristics -- Methods of test
JIS C8702-2-2003 小型阀调节的铅酸蓄电池.第2部分:尺寸、端子和标记
小形制御弁式鉛蓄電池―第２部：寸法，端子及び表示 Small-sized valve regulated lead-acid batteries -- Part 2: Dimensions, terminals and marking
JIS C8702-3-2003 小型阀调节的铅酸蓄电池.第3部分:电器用安全性推荐标准
小形制御弁式鉛蓄電池―第３部：電気機器への使用に際しての安全性 Small-sized valve regulated lead-acid batteries -- Part 3: Safety recommendations for use in electric appliances
JIS C8704-2-1999 固定式铅蓄电池.试验的一般要求和方法.第2部分:阀门调节型
据置鉛蓄電池　―　一般的要求事項及び試験方法　―　第２部：制御弁式 Stationary lead-acid batteries -- General requirements and methods of tests -- Part 2: Valve regulated types
JIS C8704-2 ERRATUM 1-2000 固定铅酸蓄电池.一般要求和试验方法.第2部分:阀调节稳定式(勘误 1)
Stationary lead-acid batteries -- General requirements and methods of tests -- Part 2: Valve regulated types (Erratum 1)
JIS C9730-2-8-2004 家用和类似用途的自动电气控制装置.第2-8部分:电动水阀的特殊要求(包括机械要求)
家庭用及びこれに類する用途の自動電気制御装置－第２－８部：電動式ウォーターバルブの個別要求事項 Automatic electrical controls for household and similar use -- Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
JIS C9730-2-17-2004 家用和类似用途的自动电气控制装置.第2-17部分:电动气阀的特殊要求(包括机械要求)
家庭用及びこれに類する用途の自動電気制御装置－第２－１７部：ガスバルブの個別要求事項 Automatic electrical controls for household and similar use -- Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
JIS C9730-2-19-2004 家用和类似用途的自动电气控制装置.第2-19部分:电动油阀的特殊要求(包括机械要求)
家庭用及びこれに類する用途の自動電気制御装置－第２－１９部：オイルバルブの個別要求事項 Automatic electrical controls for household and similar use -- Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
JIS E4115-1988 铁路车辆用电磁阀
鉄道車両用電磁弁 Magnet valves for railway rolling stock
JIS E7701-1992 高压气罐车用气罐安全阀
高圧ガスタンク車タンク用安全弁 Safety valves for high pressure gas tank car tanks
JIS F0504-1989 船上机械装置用减压阀的应用和设定压力
機関部逃し弁の装備及び設定圧力 Application and setting pressure of relief valves for ships' machinery
JIS F3056-1995 船用底阀
船用フート弁 Ships' foot valves
JIS F3057-1996 青铜立式排水口止回阀
青銅立形ストーム弁 Bronze vertical storm valves
JIS F3058-1996 铸钢立式排水口止回阀
鋳鋼立形ストーム弁 Cast steel vertical storm valves
JIS F3059-1996 青铜立式旋压排水口止回阀
青銅ねじ締め立形ストーム弁 Bronze screwdown vertical storm valves
JIS F3060-1996 铸钢立式旋压排水口止回阀
鋳鋼ねじ締め立形ストーム弁 Cast steel screwdown vertical storm valves
JIS F5610-1996 造船.锅炉用带阀门的锻钢制20K反射式水位表
船用ボイラ鍛鋼２０Ｋ弁付反射式水面計 Shipbuilding -- Forged steel 20K reflex type water gauges with valves for boilers
JIS F5611-1996 造船.锅炉用带阀门的锻钢制63K透明式水位表
船用ボイラ鍛鋼６３Ｋ弁付透視式水面計 Shipbuilding -- Forged steel 63K transparent type water gauges with valves for boilers
JIS F7211-2004 造船.带5K阀门的管道玻璃类型液位表
船用５Ｋ弁付筒形ガラス液面計 Shipbuilding -- Tube glass type level gauges with 5K valves
JIS F7212-2004 造船.带自锁阀门的管道玻璃类型液位表
船用自動閉鎖弁付筒形ガラス液面計 Shipbuilding -- Tube glass type level gauges with self closing valves
JIS F7213-1996 造船.带阀门的16K水位表
船用１６Ｋ弁付水面計 Shipbuilding -- 16K water gauges with valve
JIS F7216-1996 造船.油位表用自闭阀
船用油面計自動閉鎖弁 Shipbuilding -- Self closing valves for oil level gauges
JIS F7300-1996 造船.阀及旋塞的应用
船用弁及びコックの使用基準 Shipbuilding -- Application for valves and cocks
JIS F7301-1997 造船.青铜制5K球阀
船用青銅５Ｋ玉形弁(廃止) Shipbuilding -- Bronze 5K globe valves
JIS F7302-1997 造船.青铜制5K角阀
船用青銅５Ｋアングル弁(廃止) Shipbuilding -- Bronze 5K angle valves
JIS F7303-1996 造船.16K青铜制球阀
船用青銅１６Ｋ玉形弁(廃止) Shipbuilding -- Bronze 16K globe valves
JIS F7304-1996 造船.16K青铜制角阀
船用青銅１６Ｋアングル弁(廃止) Shipbuilding -- Bronze 16K angle valves
JIS F7305-1996 造船.铸铁制5K球阀
船用鋳鉄５Ｋ玉形弁(廃止) Shipbuilding -- Cast iron 5K globe valves
JIS F7306-1996 造船.铸铁制5K角阀
船用鋳鉄５Ｋアングル弁(廃止) Shipbuilding -- Cast iron 5K angle valves
JIS F7307-1996 造船.铸铁制10K球阀
船用鋳鉄１０Ｋ玉形弁(廃止) Shipbuilding -- Cast iron 10K globe valves
JIS F7308-1996 造船.铸铁制10K角阀
船用鋳鉄１０Ｋアングル弁(廃止) Shipbuilding -- Cast iron 10K angle valves
JIS F7309-1996 造船.铸铁制16K球阀
船用鋳鉄１６Ｋ玉形弁(廃止) Shipbuilding -- Cast iron 16K globe valves
JIS F7310-1996 造船.铸铁制16K角阀
船用鋳鉄１６Ｋアングル弁(廃止) Shipbuilding -- Cast iron 16K angle valves
JIS F7311-1996 造船.铸钢制5K球阀
船用鍛鋼２０ｋｇ／ｃｍ×２玉形弁(廃止) Shipbuilding -- Cast steel 5K globe valves
JIS F7312-1996 造船.铸钢制5K角阀
船用鍛鋼２０ｋｇ／ｃｍ×２アングル弁(廃止) Shipbuilding -- Cast steel 5K angle valves
JIS F7313-1996 造船.铸钢制20K球阀
船用鋳鋼２０Ｋ玉形弁(廃止) Shipbuilding -- Cast steel 20K globe valves
JIS F7314-1996 造船.铸钢制20K角阀
船用鋳鋼２０Ｋアングル弁(廃止) Shipbuilding -- Cast steel 20K angle valves
JIS F7315-1996 造船.铸钢制30K球阀
船用鋳鋼３０Ｋ玉形弁(廃止) Shipbuilding -- Cast steel 30K globe valves
JIS F7316-1996 造船.铸钢制30K角阀
船用鋳鋼３０Ｋアングル弁(廃止) Shipbuilding -- Cast steel 30K angle valves
JIS F7317-1996 造船.铸钢制40K球阀
船用鋳鋼４０Ｋ玉形弁(廃止) Shipbuilding -- Cast steel 40K globe valves
JIS F7318-1996 造船.铸钢制40K角阀
船用鋳鋼４０Ｋアングル弁(廃止) Shipbuilding -- Cast steel 40K angle valves
JIS F7319-1996 造船.铸钢制10K球阀
船用鋳鋼１０Ｋ玉形弁(廃止) Shipbuilding -- Cast steel 10K globe valves
JIS F7320-1996 造船.铸钢制10K角阀
船用鋳鋼１０Ｋアングル弁(廃止) Shipbuilding -- Cast steel 10K angle valves
JIS F7329-1996 造船.锻钢制40K球阀
船用鍛鋼４０Ｋ玉形弁(廃止) Shipbuilding -- Forged steel 40K globe valves
JIS F7330-1996 造船.锻钢制40K角阀
船用鍛鋼４０Ｋアングル弁(廃止) Shipbuilding -- Forged steel 40K angle valves
JIS F7333-1996 造船.铸铁软管阀
船用鋳鉄ホース弁(廃止) Shipbuilding -- Cast iron hose valves
JIS F7334-1996 造船.青铜软管阀
船用青銅ホース弁(廃止) Shipbuilding -- Bronze hose valves
JIS F7336-1996 造船.锻钢制球气阀
船用鍛鋼空気玉形弁(廃止) Shipbuilding -- Forged steel globe air valves
JIS F7337-1996 造船.锻钢制角气阀
船用鍛鋼空気アングル弁(廃止) Shipbuilding -- Forged steel angle air valves
JIS F7340-1996 造船.铸钢制球气阀
船用鋳鋼空気玉形弁(廃止) Shipbuilding -- Cast steel globe air valves
JIS F7341-1996 造船.锻钢制100K压力计阀
船用鍛鋼１００Ｋ圧力計弁(廃止) Shipbuilding -- Forged steel 100K pressure gauge valves
JIS F7346-1996 造船.青铜制5K球阀(连接阀帽型)
船用青銅５Ｋユニオンボンネット形玉形弁(廃止) Shipbuilding -- Bronze 5K globe valves (union bonnet type)
JIS F7347-1996 造船.青铜制5K角阀(连接阀帽型)
船用青銅５Ｋユニオンボンネット形アングル弁(廃止) Shipbuilding -- Bronze 5K angle valves (union bonnet type)
JIS F7348-1996 造船.青铜制16K球阀(连接阀帽型)
船用青銅１６Ｋユニオンボンネット形玉形弁(廃止) Shipbuilding -- Bronze 16K globe valves (union bonnet type)
JIS F7349-1996 造船.青铜制16K角阀(连接阀帽型)
船用青銅１６Ｋユニオンボンネット形アングル弁(廃止) Shipbuilding -- Bronze 16K angle valves (union bonnet type)
JIS F7350-1996 造船.船体铸钢制角阀
船体付鋳鋼アングル弁(廃止) Shipbuilding -- Hull cast steel angle valves
JIS F7351-1996 造船.青铜制5K螺旋拧紧止回球阀
船用青銅５Ｋねじ締め逆止め玉形弁(廃止) Shipbuilding -- Bronze 5K screw-down check globe valves
JIS F7352-1996 造船.青铜制5K螺旋拧紧止回角阀
船用青銅５Ｋねじ締め逆止めアングル弁(廃止) Shipbuilding -- Bronze 5K screw-down check angle valves
JIS F7353-1996 造船.铸铁制5K螺旋拧紧止回球阀
船用鋳鉄５Ｋねじ締め逆止め玉形弁(廃止) Shipbuilding -- Cast iron 5K screw-down check globe valves
JIS F7354-1996 造船.铸铁制5K螺旋拧紧止回角阀
船用鋳鉄５Ｋねじ締め逆止めアングル弁(廃止) Shipbuilding -- Cast iron 5K screw-down check angle valves
JIS F7356-1996 造船.青铜制5K提升止回阀
船用青銅５Ｋリフト逆止め弁(廃止) Shipbuilding -- Bronze 5K lift check valves
JIS F7358-1996 造船.铸铁制5K提升止回球阀
船用鋳鉄５Ｋリフト逆止め玉形弁(廃止) Shipbuilding -- Cast iron 5K lift check globe valves
JIS F7359-1996 造船.铸铁制5K提升止回角阀
船用鋳鉄５Ｋリフト逆止めアングル弁(廃止) Shipbuilding -- Cast iron 5K lift check angle valves
JIS F7360-1996 造船.船体铸钢制闸阀
船体付鋳鋼仕切弁(廃止) Shipbuilding -- Hull cast steel gate valves
JIS F7363-1996 造船.铸铁制5K闸阀
船用鋳鉄５Ｋ仕切弁(廃止) Shipbuilding -- Cast iron 5K gate valves
JIS F7364-1996 造船.铸铁制10K闸阀
船用鋳鉄１０Ｋ仕切弁(廃止) Shipbuilding -- Cast iron 10K gate valves
JIS F7365-1996 造船.船体铸钢制球阀
船体付鋳鋼玉形弁(廃止) Shipbuilding -- Hull cast steel globe valves
JIS F7366-1996 造船.铸钢制10K闸阀
船用鋳鋼１０Ｋ仕切弁(廃止) Shipbuilding -- Cast steel 10K gate valves
JIS F7367-1996 造船.青铜制5K提升杆式闸阀
船用青銅５Ｋ上昇式仕切弁(廃止) Shipbuilding -- Bronze 5K rising stem type gate valves
JIS F7368-1996 造船.青铜制10K提升杆式闸阀
船用青銅１０Ｋ上昇式仕切弁(廃止) Shipbuilding -- Bronze 10K rising stem type gate valves
JIS F7369-1996 造船.铸铁制16K闸阀
船用鋳鉄１６Ｋ仕切弁(廃止) Shipbuilding -- Cast iron 16K gate valves
JIS F7371-1996 造船.青铜制5K回转止回阀
船用青銅５Ｋスイング逆止め弁 Shipbuilding -- Bronze 5K swing check valves
JIS F7372-1996 造船.铸铁制5K回转式止回阀
船用鋳鉄５Ｋスイング逆止め弁 Shipbuilding -- Cast iron 5K swing check valves
JIS F7373-1996 造船.铸铁制10K回转式止回阀
船用鋳鉄１０Ｋスイング逆止め弁 Shipbuilding -- Cast iron 10K swing check valves
JIS F7375-1996 造船.铸铁制10K螺旋拧紧止回球阀
船用鋳鉄１０Ｋねじ締め逆止め玉形弁 Shipbuilding -- Cast iron 10K screw-down check globe valves
JIS F7376-1996 造船.铸铁制10K螺旋拧紧止回角阀
船用鋳鉄１０Ｋねじ締め逆止めアングル弁 Shipbuilding -- Cast iron 10K screw-down check angle valves
JIS F7377-1996 造船.铸铁制16K螺旋拧紧止回球阀
船用鋳鉄１６Ｋねじ締め逆止め玉形弁 Shipbuilding -- Cast iron 16K screw-down check globe valves
JIS F7378-1996 造船.铸铁制16K螺旋拧紧止回角阀
船用鋳鉄１６Ｋねじ締め逆止めアングル弁 Shipbuilding -- Cast iron 16K screw-down check angle valves
JIS F7379-1996 造船.黄铜制带咬合接头的30K截止阀
船用黄銅３０Ｋくい込形止め弁 Shipbuilding -- Brass 30K stop valves with bite joint(s)
JIS F7388-1996 造船.青铜制20K球阀
船用青銅２０Ｋ玉形弁 Shipbuilding -- Bronze 20K globe valves
JIS F7389-1996 造船.青铜制20K角阀
船用青銅２０Ｋアングル弁 Shipbuilding -- Bronze 20K angle valves
JIS F7398-1996 造船.燃油罐自闭式排油阀
船用燃料油タンク自動閉鎖排油弁 Shipbuilding -- Fuel oil tank self-closing drain valves
JIS F7399-2002 造船.燃油罐紧急关闭阀
船用油タンク非常遮断弁 Ship building -- Oil tank emergency shut-off valves
JIS F7399 ERRATUM 1-2002 造船.油罐应急关闭阀门(勘误 1)
Ship building -- Oil tank emergency shut-off valves (Erratum 1)
JIS F7400-1996 造船.阀和旋塞.通用检验要求
船用弁及びコックの検査通則 Shipbuilding -- Valves and cocks -- General inspection requirement
JIS F7403-1996 造船.船体青铜制球阀
船体付青銅玉形弁(廃止) Shipbuilding -- Hull bronze globe valves
JIS F7403 ERRATUM 1-2000 造船.船体青铜球形阀(勘误 1)
Shipbuilding -- Hull bronze globe valves (Erratum 1)
JIS F7404-1996 造船.船体青铜制角阀
船体付青銅アングル弁(廃止) Shipbuilding -- Hull bronze angle valves
JIS F7409-1996 造船.青铜制16k螺旋拧紧止回球阀
船用青銅１６Ｋねじ締め逆止め玉形弁(廃止) Shipbuilding -- Bronze 16K screw-down check globe valves
JIS F7410-1996 造船.青铜制16K螺旋拧紧止回角阀
船用青銅１６Ｋねじ締め逆止めアングル弁(廃止) Shipbuilding -- Bronze 16K screw-down check angle valves
JIS F7411-1996 造船.青铜制5K螺旋拧紧止回球阀(连接阀帽型)
船用青銅５Ｋユニオンボンネット形ねじ締め逆止め玉形弁(廃止) Shipbuilding -- Bronze 5K screw-down check globe valves (Union bonnet type)
JIS F7412-1996 造船.青铜制5K螺旋拧紧止回角阀(连接阀帽型)
船用青銅５Ｋユニオンボンネット形ねじ締め逆止めアングル弁(廃止) Shipbuilding -- Bronze 5K screw-down check angle valves (Union bonnet type)
JIS F7413-1996 造船.青铜制16K螺旋拧紧止回球阀(连接阀帽型)
船用青銅１６Ｋユニオンボンネット形ねじ締め逆止め玉形弁(廃止) Shipbuilding -- Bronze 16K screw-down check globe valves (Union bonnet type)
JIS F7414-1996 造船.青铜制16K螺旋拧紧止回角阀(连接阀帽型)
船用青銅１６Ｋユニオンボンネット形ねじ締め逆止めアングル弁(廃止) Shipbuilding -- Bronze 16K screw-down check angle valves (Union bonnet type)
JIS F7415-1996 造船.青铜5K升降式止回球阀(连接阀帽型)
船用青銅５Ｋユニオンボンネット形リフト逆止め玉形弁(廃止) Shipbuilding -- Bronze 5K lift check globe valves (Union bonnet type)
JIS F7416-1996 造船.青铜制5K提升式止回角阀(连接阀帽型)
船用青銅５Ｋユニオンボンネット形リフト逆止めアングル弁(廃止) Shipbuilding -- Bronze 5K lift check angle valves (Union bonnet type)
JIS F7417-1996 造船.青铜制16K提升式止回球阀(连接阀帽型)
船用青銅１６Ｋユニオンボンネット形リフト逆止め玉形弁(廃止) Shipbuilding -- Bronze 16K lift check globe valves (Union bonnet type)
JIS F7418-1996 造船.青铜制16K提升式止回角阀(连接阀帽型)
船用青銅１６Ｋユニオンボンネット形リフト逆止めアングル弁(廃止) Shipbuilding -- Bronze 16K lift check angle valves (Union bonnet type)
JIS F7421-1996 造船.锻钢制20K球阀
船用鍛鋼２０Ｋ玉形弁(廃止) Shipbuilding -- Forged steel 20K globe valves
JIS F7422-1996 造船.锻钢制20K角阀
船用鍛鋼２０Ｋアングル弁(廃止) Shipbuilding -- Forged steel 20K angle valves
JIS F7425-2006 造船.铸铁阀
船用鋳鉄弁 Shipbuilding -- Cast iron valves
JIS F7426-1996 造船.铸钢阀
船用鋳鋼弁 Shipbuilding -- Cast steel valves
JIS F7427-2005 造船.青铜制阀
船用青銅弁 Shipbuilding -- Bronze valves
JIS F7456-1999 造船.燃油箱和润滑油箱用应急截流阀的遥控截流装置
船用燃料油タンク及び潤滑油タンク非常遮断弁遠隔遮断装置 Shipbuilding -- Remote shut-off devices for fuel oil tank and lubricating oil tank emergency shut-off valves
JIS F7457-1999 造船.燃油箱和润滑油箱用应急截流阀的气动摇控截流装置
船用燃料油タンク及び潤滑油タンク非常遮断弁空気式遠隔遮断装置 Shipbuilding -- Pneumatically operated remote shut-off devices for fuel oil tank and lubricating oil tank emergency shut-off valves
JIS F7471-1996 造船.铸钢制10K螺旋拧紧止回球阀
船用鋳鋼１０Ｋねじ締め逆止め玉形弁(廃止) Shipbuilding -- Cast steel 10K screw-down check globe valves
JIS F7472-1996 造船.铸钢制10K螺旋拧紧止回角阀
船用鋳鋼１０Ｋねじ締め逆止めアングル弁(廃止) Shipbuilding -- Cast steel 10K screw-down check angle valves
JIS F7473-1996 造船.铸钢制20K螺旋拧紧止回球阀
船用鋳鋼２０Ｋねじ締め逆止め玉形弁(廃止) Shipbuilding -- Cast steel 20K screw-down check globe valves
JIS F7474-1996 造船.铸钢制20K螺旋拧紧止回角阀
船用鋳鋼２０Ｋねじ締め逆止めアングル弁(廃止) Shipbuilding -- Cast steel 20K screw-down check angle valves
JIS F7475-1996 造船.铸钢制角气阀
船用鋳鋼空気アングル弁(廃止) Shipbuilding -- Cast steel angle air valves
JIS F7480-1996 造船.橡胶座碟形阀
船用ゴム弁座式バタフライ弁 Shipbuilding -- Rubber seat butterfly valves
JIS F7505-2006 造船.球墨铸铁(延性铁)阀
船用球状黒鉛鋳鉄（ダクタイル鋳鉄）弁 Shipbuilding -- Spheroidal graphite iron (ductile iron) valves
JIS G3561-1994 阀门弹簧用油回火金属丝
弁ばね用オイルテンパー線 Oil tempered wire for valve springs
JIS G7603-2000 内燃机用阀门钢
内燃機関用バルブ鋼材（ＩＳＯ仕様） Valve steels for internal combustion engines
JIS S2120-2000 气体阀门
ガス栓 Gas valves
JIS S2120 ERRATUM 1-2001 气体阀门(勘误1)
Gas valves (Erratum 1)
JIS S2150-1993 气体装置的人工控制气体阀
ガス燃焼機器用手動ガスバルブ Manually operated gas valves for gas appliances
JIS S2151-1993 气体器具的自动气体阀
ガス燃焼機器用自動ガスバルブ Automatic gas valves for gas appliances
JIS S3019-1997 油燃烧装置油量控制阀
石油燃焼機器用油量調節器 Oil control valves for oil burning appliances
法国阀标准(NF valve standards)

--------------------------------------------------------------------------------
编号 中文名称 英文名称
NF A32-060-2001 铸造产品.泵、阀门和配件用铸钢件和镍合金铸件(内部部件和防护壳体) (Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components).)
NF A72-115-1966 高炉附件.热风阀.阀盖和底座（PN6） (BLAST FURNACE ACCESSORIES. HOT AIR VALVES. DISCS AND SEATS,PN 6.)
NF A72-120-1973 钢铁厂.气体管道和大直径阀.带法兰的接头（PN6） (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.)
NF A84-330-1982 气焊设备.乙炔发生器用“防回气—断火”的液压安全阀和组合装置.规范和试验 (GAS WELDING EQUIPMENT. HYDRAULIC SAFETY SEALS AND COMBINED “NON-RETURN VALVE/FLAME ARRESTOR“ DEVICES FOR ACETYLENE GENERATORS. REQUIREMENTS AND TESTS.)
NF A84-420-1991 气焊设备和有关方法.减压阀入品接头.尺寸 (Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.)
NF A84-621-2002 气焊设备.焊接、切割和相关工艺用带截止阀的速动连接 (Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.)
NF B35-792-2003 实验室用旋塞和阀门的颜色编码 (Colour coding of taps and valves for use in laboratories.)
NF B51-078-1-2001 木基板.结构设计的特性阀门.第1部分:OSB.颗粒板和纤维板 (Wood-based panels - Characteristic values for structural design - Part 1 : OSB, particleboards and fiberboards.)
NF C46-500-2002 工业过程控制系统.带气压输出的阀位控制器性能评估方法 (Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs.)
NF C46-502-1993 工业过程用调节阀.第1部分:术语和概论 (Industrial-process control valves. Part 1 : control valve terminology and general considerations.)
NF C46-503-1999 工业过程调节阀.第2-1部分:流量.在安装条件下液体流量的截面方程 (Industrial-process control valves. Part 2-1 : flow capacity. Sizing equations for fluid flow under installed conditions.)
NF C46-505-1998 绝缘过程控制阀.第2-3部分:流量容量.试验过程 (Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)
NF C46-506-1990 工业过程用调节阀.流量.流量的特性和校正的固有系数 (Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.)
NF C46-510-2001 工业过程控制阀.第3-1部分:尺寸.双通球型直立式控制法兰阀门的面对面尺寸和双通球型角度控制法兰阀门的中心 (Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)
NF C46-511-2001 工业过程控制阀.第3-2部分:尺寸.蝶阀除外的旋转控制阀门的面对面尺寸 (Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.)
NF C46-512-1999 工业处理控制阀.第3-3部分:尺寸.对焊接的头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN 60534-3-3) (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.)
NF C46-519-2001 工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生的噪声 (Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
NF C46-520-1993 工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量 (Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
NF C46-521-2001 工业过程控制阀.第8部分:噪声问题.第3节:气动控制阀噪声预测法 (Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)
NF C46-522-1994 工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4) (Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF C46-525-1991 工业过程用调节阀,调节阀门的限定栅屏 (Industrial-process control valves. Control valve data sheet.)
NF C46-531-2001 工业过程控制阀.第6-2部分:定位器装到控制阀的安装细则.旋转传动装置上安装的定位器 (Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)
NF C46-630-1998 工业过程控制阀.第6部分:控制阀与定位器连接用安装细节.第1节:线性传动装置上安装的定位器 (Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)
NF C47-738-2002 家用和类似用途的电气自动控制器.第2-8部分:电动水阀的特殊要求,包括机械要求 (Automatic electrical controls for household and similar use - Part 2-8 : particular requirements for electrically operated water valves, including mechanical requirements.)
NF C47-746/A2-2001 家用和类似用途自动电控制装置.第2部分:家用和类似用途漂浮型自动电气水阀操作控制的特殊要求 (Automatic electrical controls for household and similar use - Part 2-16 : particular requirements for automatic electrical water level controls of the float type for household and similar applications)
NF C47-749-2002 家用和类似用途的电气自动控制器.第2-19部分:电气操作油阀门的特殊要求,包括机械要求 (Automatic electrical controls for household and similar use - Part 2-19 : particular requirements for electrically operated oil valves, including mechanical requirements.)
NF C52-123-1968 变压器.介质液体的处理阀门 (TRANSFORMERS. LIQUID DIELECTRIC DRAIN VALVES.)
NF C53-254/A1-2003 送电和配电系统用电力电子设备.静态无功功率补偿装置用晶闸管阀的试验 (Power electronics for electrical transmission and distribution and systems - Testing of thyristor valves for static VAR compensators.)
NF C53-700-1-2002 高压直流(HVDC)电力传输用可控硅阀门.第1部分:电气试验 (Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1 : electrical testing.)
NF C53-700-1/A1-2003 高压直流电(HVDC)传输用晶闸管阀的试验.第1部分:电气试验 (Testing of thyristor valves for high-voltage direct current (HVDC) transmission - Part 1 : electrical testing.)
NF C58-432-1996 固定铅酸蓄电池组.一般要求和试验方法.第2部分:阀门调节型 (Stationary lead-acid batteries. General requirements and methods of test. Part 2 : valve regulated types.)
NF C58-561-2003 通用铅酸蓄电池组(阀门调节型).第1部分:一般要求、功能特性.试验方法 (General purpose lead-acid batteries (valve-regulated types) - Part 1 : general requirements, functional characteristics - Methods of test.)
NF C58-562-2003 通用铅酸蓄电池组(阀门调节型).第2部分:尺寸、端子和标记 (General purpose lead-acid batteries (valve-regulated types) - Part 2 : dimensions, terminals and marking.)
NF D11-121-1988 丙烯制家用浴缸.浴缸阀安装范围的补充规范 (BATHS FOR DOMESTIC PURPOSES MADE OF ACRYLIC MATERIAL. ADDITIONAL SPECIFICATION FOR THE MOUNTING OF TAPS ON BATHS.)
NF D18-001-1965 卫生阀门.卫生设备用普通阀门.词汇 (SANITARY TAPS. SINGLE TAP FOR SANITARY APPLIANCES. TERMINOLOGY.)
NF D18-201-1989 卫生设备管件.排放阀和混合阀的一般技术规范(公称尺寸1/2)PN 10.最低水压0.05MPa(0.5巴) (Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) pn 10. Minimum flow pressure of 0,05 MPa (0,5 bar).)
NF D18-202-1984 卫生阀门.缓冲器.一般技术规范 (SANITARY TAPWARE. MECHANICAL MIXERS. GENERAL TECHNICAL SPECIFICATIONS.)
NF D18-203-1998 卫生阀门.静热混合阀门(PN10)一般技术规范(欧洲标准 EN 1111) (Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification.)
NF D18-205-1989 卫生阀门.淋浴设备的附件.一般技术规范 (SANITARY TAPS. SHOWER ACCESSORIES. GENERAL TECHNICAL SPECIFICATIONS.)
NF D18-213-1996 卫生间管件.自动关闭阀PN 10 (Sanitary tapware. Automatic shut-off valves pn 10.)
NF D18-216-2003 卫生洁具.压力冲洗阀和小便池自动关闭阀PN10 (Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10.)
NF D36-306-2002 气体燃烧器和气体器具的自动关闭阀 (Automatic shut-off valves for gas burners and gas appliances.)
NF D36-351-1969 家政学.使用气体燃料的灶具和洗衣机用的锥形转动阀门 (TAPER TURNING COCKS FOR DOMESTIC COOKERS AND WASHING MACHINES USING GASEOUS FUELS.)
NF D36-380-2001 燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 (Valve proving systems for automatic shut-off valves for gas burners and gas appliances.)
NF D36-401-2000 建筑阀门.液压安全装置组.试验和要求 (Building valves - Hydraulic safety groups - Tests and requirements.)
NF D36-402-2000 建筑阀门.膨胀组.试验和要求 (Building valves - Expansion groups - Tests and requirements.)
NF D36-403-2000 建筑阀门.压力安全阀.试验和要求 (Building valves - Pressure safety valves - Tests and requirements.)
NF D36-404-2000 建筑阀门.温度和压力组合安全阀.试验和要求 (Building valves - Combined temperature and pressure relief valves - Tests and requirements.)
NF D36-405-2000 建筑阀门.膨胀阀.试验和要求 (Building valves - Expansion valves - Tests and requirements.)
NF D36-406-2004 建筑物用阀.建筑物内饮用水给水用手动铜合金和不锈钢球阀.试验和要求 (Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements.)
NF E29-003-1969 阀门关闭方向（闸板式阀门，阀式开关等） (DIRECTION OF CLOSURE FOR COCKS AND VALVES (SLUICE VALVES,SCREW DOWN VALVES,ETC.).)
NF E29-019-1985 工业阀门制造.可拆卸的栓接法兰盘.规范 (Industrial valves. Threaded detachable flanges. Specifications.)
NF E29-064-1946 阀门制造.带活门的关闭阀.建筑物内阀门制造的专门术语 (INDUSTRIAL VALVES. SCREW-DOWN STOPVALVES. TERMINOLOGY RELATING PARTICULARLY TO THE BUILDING TRADE.)
NF E29-065-1946 阀门制造.带活门的抽水阀门.建筑物内阀门制造的专门术语 (INDUSTRIAL VALVES. TAPS. TERMINOLOGY RELATING PARTICULARLY TO THE BUILDING TRADE.)
NF E29-066-1946 阀门制造抽汲阀.转动式吸入阀和关闭阀.建筑物内阀门制造的专门术语 (INDUSTRIAL VALVES. DRAW-OFF COCKS AND STOPCOCKS. TERMINOLOGY RELATING PARTICULARLY TO THE BUILDING TRADE.)
NF E29-134-1978 家用管道燃气设备用带节气阀并与阳端Ｇ１／２相连的双连式安全开关 (SAFETY RELEASE DEVICES WITH BUILT-IN STOP TAP AND TWO G 1/2 MALE UNION CONNECTIONS FOR DOMESTIC APPLIANCES USING MAINS GAS FUELS.)
NF E29-138-1978 煤气用具控制用，锥形转动，有装配式铜管路带法兰和Ｇ１／２连接管节的角形墙壁阀 (FLANGED WALL VALVES,AT RIGHT ANGLES,FOR CONTROLLING GAS APPLIANCES,WITH TAPERED ROTATING SECTION,FOR BUILT-IN BRASS PIPING AND WITH G 1/2 CONNECTION.)
NF E29-139-1998 建筑物气体装置用手工操作球阀和死底锥形旋塞 (Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings.)
NF E29-161-1943 支流阀.关闭阀和给水阀.总则.公称压力.标准压力１０ (BRANCH PIPE VALVES. STOPCOCKS AND DRAW-OFF COCKS. GENERAL. NOMINAL PRESSURE PN 10.)
NF E29-162-1943 支流阀.关闭阀.公称压力，标准压力１０ (BRANCH PIPE VALVES. STOPCOCKS. NOMINAL PRESSURE PN 10.)
NF E29-163-1943 支流阀.给水阀.公称压力，标准压力１０ (BRANCH PIPE VALVES. DRAW-OFF COCKS. NOMINAL PRESSURE PN 10.)
NF E29-200-1-2002 法兰及其连接件.按PN标注的管、阀门、配件和附件用圆形法兰.钢法兰 (Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1 : steel flanges.)
NF E29-200-4-2002 法兰及其连接件.按PN标注的管、阀门、配件和附件用圆形法兰.第4部分:铝合金法兰 (Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4 : aluminium alloy flanges.)
NF E29-300-3-2003 阀门.外壳设计强度.第3部分:实验方法 (Valves - Shell design strength - Part 3 : experimental method.)
NF E29-301-1-2000 工业阀门.对焊尾阀一端到另一端和中心到端面的尺寸 (Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves.)
NF E29-302-1-1996 法兰管系统使用的金属阀.面至面和中心至面的尺寸.第1部分:PN-指定阀 (Industrial valves. Face-to-face and centre-to-face dimensions of matal valves for use in flanged pipe systems. Part 1 : pn-designated valves.)
NF E29-303-1-2000 阀门.阀体、阀盖和阀套用材料.第1部分:欧洲标准中规定的钢 (Valves - Materials for bodies, bonnets and covers - Part 1 : steels specified in European Standards.)
NF E29-303-2-2000 阀门.阀体、阀盖和阀套用材料.第2部分:欧洲标准中没有规定的钢 (Valves - Materials for bodies, bonnets and covers - Part 2 : steels other than those specified in European Standards.)
NF E29-303-3-2000 阀门.阀体、阀盖和阀套用材料.第3部分:欧洲标准中规定的铸铁 (Valves - Materials for bodies, bonnets and covers - Part 3 : cast iron specified in European Standards.)
NF E29-303-4-2003 阀门.阀体、阀盖和阀套用材料.第4部分:欧洲标准中规定的铜合金 (Valves - Materials for bodies, bonnets and covers - Part 4 : copper alloys specified in European Standards.)
NF E29-305-1999 工业阀门.钢阀门对缝焊接末端.(欧洲标准EN 12627) (INDUSTRIAL VALVES. BUTT WELDING ENDS FOR STEEL VALVES. (EUROPEAN STANDARD EN 12627).)
NF E29-306-1-1995 阀.术语.第1部分:阀型的定义 (Valves. Terminology. Part 1 : definition of types of valves.)
NF E29-306-2-1997 阀门.术语.第2部分:阀门元件的定义 (VALVES. TERMINOLOGY. PART 2 : DEFINITION OF COMPONENTS OF VALVES. (EUROPEAN STANDARD EN 736-2).)
NF E29-306-3-1999 阀门.术语.第3部分:术语的定义 (VALVES. TERMINOLOGY. PART 3 : DEFINITION OF TERMS. (EUROPEAN STANDARD EN 736-3).)
NF E29-306-3/A1-2001 阀门.术语.第3部分:术语定义 (Valves - Terminology - Part 3 : definition of terms.)
NF E29-308-1985 工业阀门.技术规范和协调订货证明书样式 (INDUSTRIAL VALVES. TECHNICAL SPECIFICATIONS AND CONFORMITY WITH ORDER ATTESTATION MODELS.)
NF E29-309-2001 工业阀门.操作元件尺寸控制的方法 (Industrial valves - Method for sizing the operating element.)
NF E29-310-1992 通用工业阀的标记 (Marking of general purpose industrial valves.)
NF E29-311-1-2003 工业阀门.阀门试验.第1部分:压力试验、试验程序和验收标准.强制性要求 (Industrial valves - Testing of valves - Part 1 : pressure tests, test procedures and acceptance criteria - Mandatory requirements.)
NF E29-311-1982 阀门.阀门制造设备的工厂压力试验 (Valves. Factory pressure testing for valves.)
NF E29-311-2-2003 工业阀门.阀门试验.第2部分:试验、试验程序和验收标准.补充标准 (Industrial valves - Testing of valves - Part 2 : tests, test procedures and acceptance criteria - Supplementary criteria.)
NF E29-313-1990 工业阀门.阀门输送量的测定 (Industrial valves. Determination of flow of valves. Case of compressible fluids.)
NF E29-314-1986 阀门.试验.术语.方法 (VALVES. TESTS. NOMENCLATURE. METHODOLOGY.)
NF E29-316-1-2000 供水用阀门.适用性要求和专用检查试验.第1部分:一般要求 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1 : general requirements.)
NF E29-316-2-2000 供水用阀门.适用性要求和专用检查试验.第2部分:隔离阀 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2 : isolating valves.)
NF E29-316-3-2000 供水用阀门.适用性要求和专用检查试验.第3部分:止回阀 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3 : check valves.)
NF E29-316-4-2000 供水阀门.特殊目的要求和适合验证试验的适配性. 第4部分:空气阀门 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4 : air valves.)
NF E29-316-5-2001 供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)
NF E29-317-1999 工业阀门.化工和石油化工加工工业阀门.要求和试验 (Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests.)
NF E29-318-2000 工业阀门.LNG隔绝阀门.合适性和验证试验规范 (Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests.)
NF E29-319-2003 最大工作压力为16bar及以下的配气系统用阀.性能要求 (Valves for gas distribution systems with maximum operating pressure less than or equal 16 bar - Performance requirements.)
NF E29-321-1999 阀门.用水作为试验液体的流动阻力试验 (Valves - Test of flow resistance using water as test fluid.)
NF E29-330-2000 工业阀门.钢插板阀门 (Industrial valves - Steel gate valves.)
NF E29-332-2003 工业用阀.铸铁闸阀 (Industrial valves - Cast iron gate valves.)
NF E29-334-2003 工业用阀门.铜合金闸阀 (Industrial valves - Copper alloy gate valves.)
NF E29-335-2003 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 (Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries.)
NF E29-350-2003 工业用阀.钢制球阀、球状截止阀和止回阀 (Industrial valves - Steel globe and globe stop and check valves.)
NF E29-354-2003 工业用阀.铸铁球阀 (Industrial valves - Cast iron globe valves.)
NF E29-372-2001 工业阀门.铸铁止回阀 (Industrial valves - Cast iron check valves.)
NF E29-373-1984 工业阀门.止回阀.钢制，单摇板式，带法兰盘,ISO标准压力16，20，25，40，50，100 (Industrial valves. Flanged steel swing check valves. ISO PN A6, ISO PN 20, ISO PN 25, ISO PN 40, ISO PN 50, ISO PN 100.)
NF E29-382-1981 工业阀门.加压和放压的加厚部件 (Industrial valves. Drain hoss or pressure tap.)
NF E29-383-1981 工业阀门.闸阀.旁路装置 (Industrial valves. Gate valve. By-pass.)
NF E29-401-1996 工业阀门.多圈旋转阀门驱动器附件 (Industrial valves. Multi-turn valve actuator attachments.)
NF E29-402-2001 工业阀门.部分回转阀门致动器附件 (Industrial valves - Part-turn valve actuator attachments.)
NF E29-408-1992 工业用阀门.电力驱动器.规范 (INDUSTRIAL VALVES. ELECTRIC ACTUATORS. SPECIFICATIONS.)
NF E29-409-1992 工业阀门.气动的和液压的促动器.规范 (INDUSTRIAL VALVES. PNEUMATIC AND HYDRAULIC ACTUATORS. SPECIFICATIONS.)
NF E29-413-1989 工业阀门.安全阀流量计算.其他方法 (INDUSTRIAL VALVE. SAFETY VALVES AND BURSTING DISC(S) DEVICES. CALCULATION OF THEORETICAL FLOWRATE.)
NF E29-414-1992 工业阀门.安全阀门.安全阀门类型S,G1,L1和L2流率计算示例 (INDUSTRIAL VALVES. SAFETY VALVES. EXAMPLES FOR FLOWRATE CALCULATION OF SAFETY VALVES TYPES S,G1,L1 AND L2.)
NF E29-415-1990 工业阀门.安全阀.G平方型安全阀排出空气当量流量计算实例.GPL标准蓄水池的应用 (INDUSTRIAL VALVES. SAFETY VALVES. CALCULATION OF AIR EQUIVALENT FLOW CAPACITY FOR SAFETY VALVES OF TYPE G2. APPLICATION FOR STANDARD VESSELS FOR GPL.)
NF E29-420-1985 工业阀门.安全阀.技术说明书样式和协调证明书 (INDUSTRIAL VALVES. SAFETY AND RELIEF VALVES. MODEL OF TECHNICAL SPECIFICATIONS AND CONFORMITY CERTIFICATE.)
NF E29-421-1987 工业阀门.安全阀.安全膜.为获得工作特性的安装规范 (Industrial valves. Safety valves. Bursting discs.)
NF E29-425-1987 工业阀门.防爆膜装置.定义.一般设计.试验.分类.标记.调节 (Industrial valves. Bursting discs devices. Definitions. General design. Test. Classification. Marking. Conditioning.)
NF E29-430-1998 工业阀门.金属蝶型阀门 (Industrial valves. Metallic butterfly valves.)
NF E29-440-1992 水蒸气自动排泄阀.分类.(欧洲标准 EN 26704) (Automatic steam traps. Classification.)
NF E29-441-1992 水蒸气自动排泄阀.标记(欧洲标准EN26553) (Automatic steam traps. Marking.)
NF E29-443-1992 水蒸气自动排泄阀.产品试验和功能特性试验(欧洲标准 EN 26948) (Automatic steam traps. Production and performance characteristics tests.)
NF E29-445-1992 水蒸气自动排泄阀.流量测定.试验方法.(欧洲标准 EN 27842) (Automatic steam traps. Determination of discharge capacity. Test methods.)
NF E29-453-2000 工业过程控制阀门 (Industrial process control valves.)
NF E29-465-1986 工业阀门.旋转阀.铜铝球阀.规范 (INDUSTRIAL VALVES. CUPRO-ALUMINIUM BALL VALVES. SPECIFICATION.)
NF E29-466-1987 工业阀门.旋转阀.黄铜球阀.规范 (INDUSTRIAL VALVES. BRASS BALL-VALVES. SPECIFICATIONS.)
NF E29-480-1994 地下热水管网的预隔热管道系统.钢制供水管道、聚氨基甲酸乙酯热绝缘材料及高密度聚乙烯外壳的钢阀门组件(欧 (Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF E29-492-2002 工业阀门.金属材料的薄片阀 (Industrial valves - Diaphragm valves made of metallic materials.)
NF E29-648-1-1998 可运输储气瓶.储气瓶和阀门材料与气含量的相容性.第1部分:金属材料 (Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 1 : metallic materials.)
NF E29-648-2-2001 可移动式液化气钢瓶.内有气体的钢瓶和阀材料的配合性.第2部分:非金属材料 (Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.)
NF E29-648-3-1998 可运输气瓶.气瓶和含气阀门材料的可兼容性.第3部分:有氧环境中自燃试验 (Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 3 : autogenous ignition test in oxygen atmosphere.)
NF E29-650-1992 气瓶.阀出口连接 (Gas cylinders. Valve outlet connections.)
NF E29-661-1979 氯瓶上的锻钢阀门(最大容量60kg).公称压力25 (FORGED-STEEL VALVES FOR CHLORINE CYLINDERS (MAX.CAPACITT 60 KG). NOMINAL PRESSURE PN 25.)
NF E29-662-1979 呼吸保护装置的压缩气瓶的阀门.使用压力200bar.尺寸特性.标记 (VALVES FOR COMPRESSED AIR CYLINDERS FOR RESPIRATORY PROTECTIVE EQUIPMENT. SERVICE PRESSURE 200 BAR. DIMENSIONAL CHARACTERISTICS. MARKING.)
NF E29-663-1979 呼吸保护装置的压缩气瓶的阀门.使用压力300bar.尺寸特性.标记 (VALUES FOR COMPRESSED AIR CYLINDERS FOR RESPIRATORY PROTECTIVE EQUIPMENT. SERVICE PRESSURE 300 BAR. DIMENSIONAL CHARACTER & STICS. MARKING.)
NF E29-664-1979 气瓶阀门出口.标准化提供的和使用中的装置对照表 (VALVE OUTLETS FOR GAS CYLINDERS. LIST OF STANDARD PROVISIONS OR THOSE IN USE.)
NF E29-670-1998 可运输储气瓶.储气瓶阀门配件 (Transportable gas cylinders. Fitting of valves to gas cylinders.)
NF E29-671-1981 气瓶.阀门装配锥体.总则 (Gas cylinders. Taper screw thread for value stem and cylinder neck assembly. General.)
NF E29-672-1-1999 气瓶.气瓶阀门连接用17E锥螺纹.第1部分:规范 (Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Part 1 : specifications.)
NF E29-672-2-1999 气瓶.阀门与气瓶的连接用17E锥螺纹.第2部分:检验量规 (Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Part 2 : inspection gauges.)
NF E29-674-1-1996 可运输气瓶.阀与气瓶连接用25E锥形螺纹.第1部分:规范 (Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 1 : specification.)
NF E29-674-2-1996 可运输气瓶.阀与气瓶连接用25E锥形螺纹.第2部分:量规检查 (Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 2 : gauge inspection.)
NF E29-677-1981 气瓶.阀门装配锥体.公称直径28.3.锥度3/25.螺距1.814惠氏螺纹.检验规范 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER : 28,3. TAPER 3/25. 14 TPI SI. GAUGE REQUIREMENTS.)
NF E29-678-1980 气瓶.气瓶阀门颈装配螺纹锥体.公称直径16.4.锥度3/20.螺距14国际单位制 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 16,4,TAPER 3/20,14 TPI SI.)
NF E29-679-1981 气瓶.气瓶阀门颈装配锥体.公称直径16.4.锥度3/20.螺距14国际单位制.量规要求 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 16.4. TAPER 3/20. 14 TPI SI. GAUGE REQUIREMENTS.)
NF E29-680-1980 气瓶.阀杆和瓶颈组件用锥螺纹.公称直径25.8.锥度3/26(6°38`).螺距1.814国际单位制 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 25,8,TAPER 3/26 (6 DEGREES 38`,14 TPI SI)
NF E29-681-1981 气瓶.阀杆和瓶颈组件用锥螺纹.公称直径25.8.锥度3/26(6°C 38`).螺距1.814国际单位制.量规要求 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 25,8. TAPER 3/26 (6 DEGREES C 38`). 14 TP1 SI. GAUGE REQUIREMENTS.)
NF E29-682-1980 气瓶.阀杆和瓶颈组件用锥螺纹.公称直径34.锥度8.732％(5°).螺距为2国际单位制 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CULINDER NECK ASSEMBLY. NOMINAL DIAMETER 34 TAPER 8 732 PER CENT (5 DEGREES),PITCH 2 SI.)
NF E29-683-1981 气瓶.阀杆和瓶颈组件用锥螺纹.公称直径34.锥度8.736％(5°C).螺距为2国际单位制.量规要求 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 34. TAPER 8.736 PER CENT (5 DEGREES C). PITCH 2 SI. GAUGE ERQUIREMENTS.)
NF E29-684-1980 气瓶.阀杆和瓶颈组件用锥螺纹.公称直径26.锥度1/16(3°34`).螺距为1.814锥管螺纹 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 26,TAPER 1/16 (3 DEGREES 34`),14 TPI NPT.)
NF E29-685-1981 气瓶.阀杆和瓶颈组件用锥螺纹.公称直径26.锥度1/16(3°34`).螺距为1.814锥管螺纹.量规要求 (GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 26. TAPER 1/16 (3 DEGREES 34`). 14 TPI NPT. GAUGE REQUIREMENTS.)
NF E29-686-1-2002 储气瓶.连接储气瓶阀门的平行螺纹.第1部分:规范 (Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification.)
NF E29-686-2-2002 储气瓶.连接储气瓶阀门的平行螺纹.第2部分:量规检验 (Gas cylinders - Parallel threads for correction of valves to gas cylinders - Part 2 : Gauge inspection.)
NF E29-690-1996 可运输气瓶.气瓶阀.规范和型式试验(EN 849) (Transportable gas cylinders. Cylinder valves. Specification and type testing.)
NF E29-690/A2-2001 可移动的燃气瓶.燃气瓶阀门.规范和型式试验 (Transportable gas cylinders - Cylinder valves - Specification and type testing.)
NF E29-691-1996 可运输气瓶.工业和医用气瓶用阀保护帽和阀罩.设计,安装和试验 (Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.)
NF E29-691/A1-1999 可运输储气瓶.工业用和医用储气瓶用阀保护帽和阀护罩.设计、结构和试验 (Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.)
NF E29-691/A2-2000 便携式气瓶.工业和医用气瓶用阀门保护装置.设计,结构和试验 (Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.)
NF E29-692-1-2001 气瓶.微电子工业用气瓶阀接头.第1部分:输出口接头 (Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1 : outlet connections.)
NF E29-692-2-2001 气瓶.微电子工业用气瓶阀接头.第2部分:气瓶阀接头的规范和型式试验 (Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2 : specification and type testing for valve to cylinder connections.)
NF E29-693-3-2001 气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第3部分:230巴阀门适配器 (Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3 : adaptor for 230 bar valves.)
NF E29-694-2001 可运输气瓶.气瓶阀门.生产试验和检验 (Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections.)
NF E29-695-2001 可运输气瓶.不可再充填的气瓶用阀门.规范和原型试验 (Transportable gas cylinders - Cylinders valves for non-refillable cylinders - Specification and prototype testing.)
NF E29-790-2003 便携式燃具用带或不带阀门的一次性使用液化石油气金属气瓶.制造、检验、试验和标记 (Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking.)
NF E29-796-2003 可运输储气瓶.储气瓶定期检查时气瓶阀的检查和维修 (Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders.)
NF E31-330-1-2000 燃油锅炉用供油系统的安装. 第1部分:安全要求和试验.部件,进气阀控制和安全装置,供气油罐 (Installations for oil supply systems for oil burners - Part 1: safety requirements and tests : parts, oil feed pumps, control and safety devices, supply tanks.)
NF E31-330-2-2000 燃油锅炉用供油系统的安装. 第2部分:安全要求和试验.部件,阀门, 管道,过滤器,油充气器,仪表 (Installations for oil supply systems for oil burners - Part 2 : safety requirements and tests : parts, valves, pipes, filters, oil de-aerators, meters.)
NF E32-110-10-2002 水管锅炉和辅助设备.第10部分:防过压安全阀的要求 (Water-tube boilers and auxiliary installations - Part 10 : requirements for safeguards against excessive pressure.)
NF E39-013-2003 区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外覆层进宅钢管用钢阀门组件 (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of pol)
NF E48-400-1996 液压传动.阀门装配面及盒式阀腔的识别标志 (HYDRAULIC FLUID POWER. CODE FOR IDENTIFICATION OF VALVE MOUNTING SURFACES AND CARTRIDGE VALVE CAVITIES.)
NF E48-423-2001 液压传动.减压阀、顺序阀、卸载阀、节流阀和止回阀.装配面 (Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.)
NF E48-432-1993 液压动力.4和5阀口伺服阀.安装面 (HYDRAULIC FLUID POWER. POUR- AND FIVE-PORTS SERVOVALVES. MOUNTING SURFACES.)
NF E48-435-1998 液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸 (Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
NF E49-080-1-2002 气压液动.五通定向控制阀.第1部分:不带电连接器的安装接口 (Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)
NF E49-080-2-2002 气压液动.五通方向控制阀.第2部分:任选电气连接器的安装接口面 (Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)
NF E49-090-2-2003 气压传动.18mm和26mm五气口方向控制阀.第2部分:带光学电接头的安装面 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.)
NF E49-091-2002 气压传动.控制阀和其它部件的孔口和控制机械的验证 (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)
NF E49-093-2003 气压传动.3/2电磁阀.安装接口表面 (Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces.)
NF E51-718-1998 建筑物通风.气体终端设备.调节器和阀门的动力学试验 (Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.)
NF E86-507-1999 制冷容器.制冷装置阀(欧洲标准EN 1626) (Cryogenic vessels. Valves for cryogenic service.)
NF E86-512-1-2002 冷凝容器.防超压安全设施.第1部分:冷凝设备的安全阀 (Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1 : safety valves for cryogenic service.)
NF E87-010-1976 轮胎充气阀.术语 (TYPE VALVES. TERMINOLOGY.)
NF F11-806-1996 铁路车辆.压缩空气电路用截止塞阀 (RAILWAY ROLLING STOCK. SHUT-OFF PLUG VALVES, FOR COMPRESSED AIR CIRCUITS.)
NF H44-012-1986 烟雾发生器.气雾剂容器阀.１８mm皮碗 (Aerosols dispensers. Valves. Ferrule 18 mm.)
NF H44-013-1986 烟雾发生器.气雾剂容器阀.２０mm皮碗 (Aerosols dispensers. Valves. Ferrule 20 mm.)
NF H44-015-1986 烟雾发生器.气雾剂容器阀.１５mm皮碗 (Aerosols dispensers. Valves. Ferrule 15 mm.)
NF H44-020-1988 烟雾发生器.压力分配容器（气雾剂容器型）.气雾剂容器上阀门的机械密封和安装的快速试验 (AEROSOL DISPENSERS. RAPID TEST. TIGHTNESS OF VALVE MECHANISMS AND CLINCH.)
NF H44-028-1986 烟雾剂发生器.气雾剂阀.１７mm皮碗 (AEROSOLS DISPENSERS. VALVES. FERRULE 17 MM.)
NF H44-029-1986 烟雾剂发生器.气雾剂阀.１３mm皮碗 (AEROSOLS DISPENSERS. VALVES. FERRULE 13 MM.)
NF H44-030-1986 烟雾剂发生器.气雾剂阀.１１mm皮碗 (AEROSOLS DISPENSERS. VALVES. FERRULE 11 MM.)
NF J25-215-1969 造船工业.航海.船上阀门附件.杆的直径和螺纹 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. SHANK DIAMETERS AND THREADS.)
NF J25-220-1969 造船工业.航海.船上阀门附件.船首和手轮用方钢 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. SQUARES FOR STEMS AND HANDWHEELS.)
NF J25-255-1969 造船工业.航海.船上阀门附件.偏移手轮.尺寸.互换性 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. DISHED HANDWHEELS. DIMENSIONS. INTERCHANGEABILITY.)
NF J25-274-1969 造船工业.航海.船上阀门附件.板手 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. CRANK HANDLES.)
NF J25-308-1969 造船工业.船上阀门附件.填料箱.法兰压盖.尺寸.互换性 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. STUFFING BOXES. GLANDS WITH FLANGE. DIMENSIONS. INTERCHANGEABILITY.)
NF J25-310-1969 造船工业.航海.船上阀门附件.带压盖和螺母的填料箱 (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. STUFFING BOXES WITH GLAND AND NUT.)
NF J25-500-1958 造船工业.海水专用阀门.一般规范 (SHIPBUILDING. SEA WATER VALVES. GENERAL SPECIFICATION.)
NF J25-505-1958 造船工业.海水专用阀门.器材连接孔的位置 (SHIPBUILDING. SEA WATER VALVES. ARRANGEMENT OF BODY ENDS.)
NF J25-510-1958 造船工业.海水专用阀门.带螺纹杆的连接阀.安装Ｉ.部件名称 (SHIPBUILDING. SEA WATER VALVES. SCREW-DOWN STOP VALVES. PATTERN I. OPERATING MECHANISM. PARTS LIST.)
NF J25-513-1958 造船工业.海水专用阀门.自由滑动式连接阀，安装ＩＩ.部件名称 (SHIPBUILDING. SEA WATER VALVES. SHIP SIDE DISCHARGE VALVES. PATTERN II. OPERATING MECHANISM PARTS LIST.)
NF J25-516-1958 造船工业.海水专用阀门.闭锁式自由阀.安装ＩＩＩ.部件名称 (SHIPBUILDING. SEA WATER VALVES. SCREW-DOWN STOP-AND-CHECK VALVES. PATTERN III. OPERATING MECHANISM. PARTS LIST.)
NF J25-519-1958 造船工业.海水专用阀门.闭锁式自由阀门.安装ＩＶ.部件名称 (SHIPBUILDING. SEA WATER VALVES. SCREW-DOWN STOP-AND-CHECK VALVES WITH OPENING MECHANISM. PATTERN IV. OPERATING MECHANISM PARTS LIST.)
NF J25-522-1958 造航工业.海水专用阀门.舱底吸水阀.组装件.一般尺寸 (SHIPBUILDING. SEA WATER VALVES. BILGE VALVES. ASSEMBLY. GENERAL DIMENSIONS.)
NF J25-526-1958 造船工业.海水专用阀门.船弦排水阀.组装件.一般尺寸 (SHIPBUILDING. SEA WATER VALVES. DISCHARGE VALVES. ASSEMBLY. GENERAL DIMENSIONS.)
NF J25-530-1958 造船工业.海水专用阀门.吸水收集箱.组装件.一般尺寸 (SHIPBUILDING. SEA WATER VALVES. SUCTION MANIFOLD VALVES. ASSEMBLY. GENERAL DIMENSIONS.)
NF J25-535-1958 造船工业.海水专用阀门.压力收集箱.组装件.一般尺寸 (SHIPBUILDING. SEA WATER VALVES. DELIVERY MANIFOLD VALVES. ASSEMBLY. GENERAL DIMENSIONS.)
NF J38-540-2002 船舶和造船技术.载油舱用压力/真空阀 (Ships and marine technology - Pressure/vacuum valves for cargo tanks.)
NF J41-410-1957 造船工业.“金士顿“阀门.一般规范 (SHIPBUILDING. KINGSTON VALVES. GENERAL SPECIFICATION.)
NF J41-415-1957 造船工业.“金士顿“阀门.总成.一般尺寸 (SHIPBUILDING. KINGSTON VALVES. ASSEMBLY. GENERAL DIMENSIONS.)
NF J41-416-1957 造船工业.“金士顿“阀门.标称直径５０－１７５号.部件名称 (SHIPBUILDING. KINGSTON VALVES,NOMINAL BORE 50-175 MM. NOMENCLATURE OF PARTS.)
NF J41-417-1957 造船工业.“金士顿“阀门.标称直径２００－５００号.部件名称 (SHIPBUILDING. KINGSTON VALVES,NOMINAL BORE 200-500 MM. NOMENCLATURE OF PARTS.)
NF J41-420-1957 造船工业.“金士顿“阀门.标称直径５０－１７５号.阀体 (SHIPBUILDING. KINGSTON VALVES,NOMINAL BORE 50-175 MM. BODY.)
NF J41-421-1957 造船工业.“金士顿“阀门.标称直径２００－５００号.阀体 (SHIPBUILDING. KINGSTON VALVES,NOMINAL BORE 200-500 MM. BODY.)
NF J41-425-1957 造船工业.“金士顿“阀门.卡箍 (SHIPBUILDING. KINGSTON VALVES. BONNET.)
NF J41-430-1957 造船工业.“金士顿“阀门.活门 (SHIPBUILDING. KINGSTON VALVES. DISK.)
NF J41-435-1957 造船工业.“金士顿“阀门.阀体环座 (SHIPBUILDING. KINGSTON VALVES. BODY SEAT RING.)
NF J41-440-1957 造船工业.“金士顿“阀门.阀杆 (SHIPBUILDING. KINGSTON VALVES. STEM.)
NF J41-445-1957 造船工业.“金士顿“阀门.上导杆.螺母锁紧 (SHIPBUILDING. KINGSTON VALVES. UPPER GUIDE. TAB WASHER.)
NF J41-446-1957 造船工业.“金士顿“阀门.下导杆 (SHIPBUILDING. KINGSTON VALVES. LOWER GUIDE.)
NF J41-450-1957 造船工业.“金士顿“阀门.压力填圈.压盖和衬套 (SHIPBUILDING. KINGSTON VALVES. STUFFING BOX,GLAND AND BUSHING.)
NF J41-455-1957 造船工业.“金士顿“阀门.手轮.套管 (SHIPBUILDING. KINGSTON VALVES. HANDWHEEL. OPERATING SLEEVE.)
NF J41-460-1957 造船工业.“金士顿“阀门.止动帽 (SHIPBUILDING. KINGSTON VALVES. LOCKING SHACKLE.)
NF J41-465-1957 造船工业.“金士顿“阀门.螺钉零件 (SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)
NF J41-470-1957 造船式为.“金士顿“阀门.加工.调节 (SHIPBUILDING. KINGSTON VALVES. MACHINING. FITS.)
NF J41-606-1993 造船工业.消防水管.消防阀门 (SHIPBUILDING. FIRE HOSES. FIRE VALVES.)
NF J45-780-1953 造船工业.带自动阀的测量器.安装组件 (SHIPBUILDING. SOUNDING PIPES WITH SELF-ACTING VALVE. INSTALLATION ASSEMBLY.)
NF J45-782-1953 造船工业.带自动阀的测量头.安装组件 (SHIPBUILDING. HEAD OF SOUNDING PIPES WITH SELF-ACTING VALVE. MOUNTING ASSEMBLY.)
NF J45-784-1953 造船工业.带自动阀的测量头.盒子的零件 (SHIPBUILDING. HEAD OF SOUNDING PIPES WITH SELF-ACTING VALVE. DETAILS OF BODY.)
NF J45-788-1953 造船工业.带自动阀的测量头.零件 (SHIPBUILDING. HEAD OF SOUNDING PIPES WITH SELF-ACTING VALVE. DETAILS.)
NF J95-045-1998 小型船舶.船底阀和整个船体用配件.第1部分:金属的 (Small craft. Seacoks and through-hull fittings. Part 1 : metallic.)
NF M41-016-1997 液化石油气.丙烷干燥评定.阀门冷冻法 (LIQUEFIED PETROLEUM GASES. ASSESSMENT OF THE DRYNESS OF PROPANE. VALVE FREEZE METHOD. (EUROPEAN STANDARD EN ISO 13758).)
NF M62-301-4-2001 密封罩用组件.第4部分:通风和气体清洁系统(如:过滤器和疏水阀)的安全和调节阀门以及控制和保护装置 (Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.)
NF M87-213-2001 石油和天然气工业.下降孔设备.地下安全阀设备 (Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment.)
NF M87-400-1984 石油工业.带外部杆和螺栓盖的钢制阀门.法兰或焊接端点ＩＳＯＰＮ２０．ＩＳＯＰＮ４２０ (Petroleum industry. Steel gate valves with-on flanges and joints. ISO PN 20 to ISO PN 420.)
NF M87-401-1985 石油工业.阀门试验和验收检查.耐压性能 (Petroleum industry. Acceptance testing and inspection of valves. Performance under pressure.)
NF M87-402-1973 石油工业.带钢制法兰硬块密封物有斜座的阀门 (PETROLEUM INDUSTRY. FLANGES AND SOLID WEDGE STEEL GATE-VALVES.)
NF M88-114-1982 罐车.液化气运输.4-40ba工作压力的DN50.DN80和DN100的止流和安全内部阀门 (ROAD TANKERS. TRANSPORTATION OF LIQUEFIED GASES. INTERNAL STOP AND SAFETY OBTURATOR. NOMINAL DIAMETERS DN 50,DN 80 AND DN 100 FOR SERVICE PRESSURE BETWEEN 4 BAR AND 40 BAR.)
NF M88-125-2001 危险货物运输罐.罐的配套设备.蒸汽转移阀门 (Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve.)
NF M88-127-2003 危险物品运输用槽罐车.槽罐车用辅助设备.无压平衡底阀 (Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve.)
NF M88-131-2003 危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀 (Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve.)
NF M88-729-2003 自闭合式LPG气瓶阀规范和试验 (Specification and testing of LPG cylinder valves - Self closing.)
NF M88-729/A1-2003 自闭合式LPG气瓶阀规范和试验 (Specification and testing of LPG cylinder valves - Self closing.)
NF M88-730-2003 手控LPG气瓶阀规范和试验 (Specification and testing of LPG cylinder valves - Manually operated.)
NF M88-730/A1-2003 手控LPG气瓶阀规范和试验 (Specification and testing of LPG cylinder valves - Manually operated.)
NF M88-731-2003 液化石油气(LPG)罐阀和配件的规范和试验 (Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings.)
NF M88-737-2003 可运输可再填充液化石油气瓶用减压阀 (Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG).)
NF M88-771-1975 液化烃容器装置.手动截止阀.制造.功能.试验 (LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.)
NF M88-773-1981 商用丁烷容器装置.低压固定调节的家用商品丁烷减压阀 (INSTALLATIONS BURNING COMMERCIAL BUTANE. PRESSURE REGULATOR TRIP,LOW-PRESSURE FIXED FLOW,FOR COMMERCIAL BUTANE FOR DOMESTIC USE.)
NF M88-775-1990 装液态碳氢化合物的钢瓶.可移动部分和半移动部分用高压可调减压阀.功能.标记、试验 (LIQUEFIED HYDROCARBONS SYSTEMS IN CYLINDERS. FIXED ADJUSTEMENT,HIGH PRESSURE REGULATOR FOR MOBILE AND SEMI-MOBILE PREMISES. CONSTRUCTION. OPERATION, MARKING,TESTS.)
NF P16-220-2003 排水系统用通气阀.要求、试验方法和合格评定 (Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity.)
NF P16-260-4-2001 建筑物和现场用废水提升装置.施工和试验原则.第4部分:无粪便废水和含粪便物废水用单向阀 (Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : non-return valves for faecal-free wastewater and wastewater containing faecal matter.)
NF P40-500-2001 家庭计划的阀门和配件的维修服务活动.有利于水消耗控制 (Maintenance service activities for valves and fittings in housing schemes - Contribution to water consumption control.)
NF P43-000-2003 建筑物阀门.建筑物中饮用水供应用铜合金节流阀.试验要求.国家标准补充 (Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement.)
NF P43-001-2000 建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求 (Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.)
NF P43-002-1981 建筑物水管阀门.水表截止阀.一般技术规范 (VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-003-1983 建筑物水管阀门.冲刷水箱阀门.一般技术规范 (VALVES FOR BUILDING. BALL FLOAT VALVES FOR FLUSHING TANKS. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-007-1985 建筑物水管阀门.A级控制非止回阀.一般技术规范 (Valves and taps for water supply in buildings. Controllable check valves class A. General technical specifications.)
NF P43-009-1988 建筑用供水阀门.自控带中间溢流室的管路.技术规范 (VALVES AND TAPS FOR BUILDINGS. NON CONTROLLABLE PIPE INTERRUPTOR WITH INTERMEDIATE DISCHARGE CHAMBER. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-011-1985 建筑物水管阀门.非控制不同压力范围CB断路器.一般技术规范 (VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. CB DISCONNECTORS WITH DIFFERENT NON CONTROLLABLE PRESSURE RANGES. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-013-1988 建筑用水管阀门.斜通气阀.通用技术规范 (VALVES AND TAPS FOR BUILDINGS. INCLINE ANTI VACUUM VALVES (STRAIGHT OR ANGLED) DA. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-014-1988 建筑物阀门.直流永久空气接触开关.一般技术规范 (VALVES AND TAPS FOR BUILDING. PIPE INTERRUPTOR WITH PERMANENT ATMOSPHERIC CONTACT DC. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-016-1985 建筑物水管阀门.“HA“端部断路器.一般技术规范 (VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. HA ENDING DISCONNECTOR FOR TAPPING COCKS. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-017-1989 建筑物水管阀门.带法兰可调EA止回阀.一般技术规范 (VALVES AND TAPS FOR WATER SUPPLY IN BULDINGS. CONTROLLABLE CHECK VALVES EA,WITH FLANGES. GENERAL TECHNICAL SPECIFICATIONS.)
NF P43-018-1990 建筑物水管阀门.饮用水卫生监测仪器.特性 (VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. CHECKING FITTING IN PLACE OF SANITARY PROTECTION UNITIES USED FOR DRINKING SUPPLY. SPECIFICATIONS.)
NF P43-022-1988 建筑物水管阀门.AC分流溢出的设备.通用技术规范 (VALVES AND TAPS FOR BUILDINGS. AIR GAP WITH DIVERTER AND OVERFLOW AC. GENERAL SPECIFICATIONS.)
NF P43-023-1988 建筑物水管阀门.AD喷射溢出的设备.一般规范 (VALVES AND TAPS FOR BUILDINGS. AIR GAP WITH INJECTOR AD. GENERAL SPECIFICATIONS.)
NF P43-024-1988 建筑物水管阀门.AE卫生设施及设备.一般规范 (VALVES AND TAPS FOR BUILDINGS. HYGIENIC AIR GAP AE. GENERAL SPECIFICATIONS.)
NF P43-035-2000 建筑阀门.供水减压阀和复合供水减压阀.要求和试验 (Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests.)
NF P50-746-2000 建筑物结构中的热桥.线性热阀门.简化方法和无效阀门 (Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values.)
NF P50-757-2000 建筑材料和产品.湿热性能.列表设计的阀门 (Building materials and products - Hygrothermal properties - Tabulated design values.)
NF P52-001-1975 取暖设备用安全阀.一般技术规范 (SAFETY VALVES FOR HEATING INSTALLATIONS.)
NF P52-002-1-1989 散热器恒温阀.第1部分:试验方法的要求 (Thermostatic radiator valves. Part 1 : requirements and test methods.)
NF R16-316-1989 道路车辆.带凸缘和节流阀式试验喷咀 (Road vehicles. Calibrating nozzle, delay pintle type.)
NF S31-014-1982 声学.供水设施用液压设备和阀门噪音的实验室测量.第1部分:测量方法 (ACOUSTICS. LABORATORY TESTS ON NOISE FORM TAPWARE AND HYDRAULIC EQUIPMENT USED IN WATER INSTALLATIONS. PART 1 : METHOD OF MEASUREMENT.)
NF S31-014-3-1997 声学.用于供水安装的设备和应用的噪音发散的实验室试验.第3部分:内线阀门和应用的安装和操作条件 (Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 3 : mounting and operating conditions for in-line valves and appliances.)
NF S31-014-4-1997 声学.用于供水安装的设备和用具中发散的噪音的实验室试验.第3部分:串联式的阀门和用具的镶嵌和操作条件 (Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 4 : mounting and operating conditions for special appliances.)
NF S52-728-1994 越野滑雪.扭距阀选择 (ALPINE SKI-BINDINGS. SELECTION OF RELEASE TORQUE VALUES.)
NF S62-135-2001 固定式消防系统.气体灭火系统用元件.第5部分:CO2系统用的高、低压选择器阀门及其起动器的要求和试验方法 (Fixed firefighting systems - Components for gas extinguishing systems - Part 5 : requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems.)
NF S62-143-2001 固定的消防系统.气体灭火系统用元件.第13部分:止回阀的要求和试验方法 (Fixed firefighting systems - Components for gas extinguishing systems - Part 13 : requirements and test methods for check valves and non-return valves.)
NF S62-222-1999 固定的消防系统.喷头和喷水系统用元部件.第2部分:报警湿阀组件 (Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2 : wet alarm valve assemblies.)
NF S62-222/A1-2001 固定灭火系统.喷头和喷水系统用元部件.第2部分:报警湿阀组件 (Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2 : wet alarm valve assemblies.)
NF S62-223-2000 固定灭火系统.自动洒水器和喷水系统用元件.第1部分:警报干阀组件 (Fixed firefighting systems - Components for automatic sprinkler and water spray systems - Part 3 : dry alarm valves assemblies.)
NF S62-223/A1-2001 固定灭火系统.喷头和喷水系统用元部件.第3部分:报警干阀组件 (Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3 : dry alarm valve assemblies.)
NF S76-017-1999 呼吸保护装置.无吸入阀和有防止气体或气体微粒或只有微粒的分隔滤膜的半口罩.(欧洲标准EN 1827) (RESPIRATORY PROTECTIVE DEVICES. HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY. REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 1827).)
NF S76-024-1-2000 呼吸保护装置.气瓶阀.插入式连接器用螺纹接头 (Respiratory protective devices - Gas cylinder valves - Part 1 : thread connections for insert connector.)
NF S76-024-1/A1-2003 呼吸防护装置.气瓶阀门.第1部分:旋入式连接器的螺纹连接件 (Respiratory protective devices - Gas cylinder valves - Part 1 : thread connections for insert connector.)
NF S76-024-2-1999 呼吸保护装置.气瓶阀.插座接头 (RESPIRATORY PROTECTIVE DEVICES. GAS CYLINDER VALVES. PART 2 : OUTLET CONNECTIONS. (EUROPEAN STANDARD EN 144-2).)
NF S76-024-3-2003 呼吸保护器.气瓶阀.第3部分:潜水硝基气体和氧气气瓶的出口连接 (Respiratory protective devices - Gas cylinder valves - Part 3 : outlet connections for diving gases Nitrox and oxygen.)
NF S90-110-1996 便携式气瓶.医用指针指示马蹄型阀门排出口接头 (Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use.)
NF S90-110/A1-2001 可移动的燃气瓶.医用定位销转位的卡箍式阀出口连接 (Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use.)
NF S94-201-2-1998 非活动外科植入物.血管和心脏植入物的特殊要求.包括心脏阀门管线的血管修补物 (NON ACTIVE SURGICAL IMPLANTS. PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS. PART 2 : VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS. (EUROPEAN STANDARD EN 12006-2).)
NF S95-178-1998 医用气体用压力调节器.第3部分:与钢瓶阀门相结合的压力调节器(欧洲标准EN 738-3) (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 3 : PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES. (EUROPEAN STANDARD EN 738-3).)
NF S95-178/A1-2002 医用气体压力调节器.第3部分:带瓶阀的压力调节器 (Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.)
NF T54-015-1997 塑料管道系统.热塑阀门.抗内压和防泄漏的试验方法 (Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.)
NF T54-063-4-2003 供水用塑料管道系统.聚乙烯(PE).第4部分:阀 (Plastics piping systems for water supply - Polyethylene (PE) - Part 4 : valves.)
NF T54-065-4-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第4部分:阀门 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.)
NF T54-082-1988 塑料.热固塑料阀.耐压和密封性试验 (PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.)
NF T54-083-1991 热塑料制阀门.转矩.试验方法.(欧洲标准EN 28233) (THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (EUROPEAN STANDARD EN 28233).)
NF T54-084-1991 热塑料制阀门.耐疲劳强度.试验方法.(欧洲标准EN 28659) (THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (EUROPEAN STANDARD EN 28659).)
NF T54-100-1997 塑料管道系统.热塑阀门.外部送风后阀门完好性的测试方法 (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.)
NF T54-300-4-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.)
NF T54-920-1997 塑料管道系统.聚乙烯管道系统用阀门.在工作机构弯头处和弯头之后的防漏试验方法(欧洲标准EN 1680) (Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.)
NF T54-921-1997 塑料管道系统.热塑阀门.弯曲下温度周期变化后阀门完好性的测试方法 (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.)
NF T54-930-1997 塑料管道系统.聚乙烯(PE)阀.支架间耐弯曲试验方法 (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.)
NF T54-932-1997 塑料管道系统.注模热塑配件配件、阀和附属设备.管道元件注模用热塑材料长期液压强度的测定 (Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.)
NF T54-934-1997 塑料管道系统.管件,阀和附件.气流率/压降关系的测定 (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)
NF T54-936-1997 塑料管道系统.聚乙烯(PE)阀.耐热循环试验方法(欧洲标准EN 12119) (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling.)
NF T81-103-1980 液态体化学产品的运输和装卸.底部注入或排放的罐车.内部关闭阀和安全阀.使用压力等于或小于４巴 (TRANSPORTATION AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKER VEHICLES FILLED AND EMPTIED FROM BELOW. INTERNAL SAFETY AND STOP VALVE. OPERATING PRESSURE EQUAL TO OR LESS THAN 4 BAR.)
NF T81-104-1981 液态体化学产品的运输和装卸.底部注入或排放的罐车.４－４０bar工作压力用标准尺寸ＤＮ８０和ＤＮ１００的 (TRANSPORTATION AND HANDLING OF LIQUEFIED GASES. TANKER VEHICULES FILLED AND EMPTIED FROM BELOW. INTERNAL SAFETY GATES DN 80 AND DN 100 FOR OPERATING PRESSURES BETWEEN 4 BAR AND 40 BAR.)
NF T81-151-1977 化学产品的运输与装卸.道路罐车.用销或螺栓固定的阀门用圆盖 (TRANSPORTATION AND HANDLING OF CHEMICALS. ROAD TANKERS. CAPS FOR VALVES FIXED BY PINS OR BOLTS.)
NF U51-421-1985 灌溉设备.容积阀.一般技术条件和试验方法 (IRRIGATION EQUIPMENT. VOLUMETRIC VALVES. GENERAL REQUIREMENTS AND TEST METHOD.)
NF X08-102-1986 颜色.实验室用阀门.液体鉴别通用颜色 (Colours. Laboratory topware. Identification of fluids with conventional colours.)
NF X42-129-2001 生物技术.管道和仪表的性能标准.第5部分:阀门 (Biotechnology - Performance criteria for piping and instrumentation - Part 5 : valves.)
NF X43-103-1996 空气质量.气味测量.污水气味测量.超阀限方法 (AIR QUALITY. OLFACTOMETRIC MEASUREMENTS. MEASUREMENT OF THE ODOUR OF A GAZEOUS EFFLUENT. SUPRA-THRESHOLD METHODS.)
NF X50-001-7-1-2000 动力站设备和系统的征购指南.第7部分:管道和阀门.第1节:高压管道系统 (Guide for procurement of power station plant, equipement and systems - Part 7 : pipework and valves - Section 1 : high pressure piping systems.)
NF X50-001-7-2-2000 动力站设备和系统的征购指南.第7部分:管道和阀门.第2节:锅炉和高压管道阀门 (Guide for procurement of power station plant, equipment and systems - Part 7 : pipework and valves - Section 2 : boiler and high pressure piping valves.)
XP E29-140-1999 使用气体燃料的家用装置的控制阀.安全控制阀(带有集中自动密闭器的) (Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)